3 files changed, 115 insertions, 0 deletions
diff --git a/doc/man/artsc-config-trinity.1 b/doc/man/artsc-config-trinity.1
new file mode 100644
index 0000000..6e61ea5
--- /dev/null
+++ b/doc/man/artsc-config-trinity.1
@@ -0,0 +1,41 @@
+.TH "ARTSC-CONFIG" "1" 
+.SH "NAME" 
+artsc-config \(em Get information about a libartsc installation 
+.SH "SYNOPSIS" 
+.PP 
+\fBartsc-config\fR [\fB\-\-arts-prefix\fI\fR\fP]  [\fB\-\-arts-version\fI\fR\fP]  [\fB\-\-cflags\fI\fR\fP]  [\fB\-\-libs\fI\fR\fP]  [\fB\-\-version\fI\fR\fP]  
+.SH "DESCRIPTION" 
+.PP 
+This manual page documents briefly the 
+\fBartsc-config\fR command. 
+.PP 
+\fBartsc-config\fR displays information about a previous libartsc installation. 
+.SH "OPTIONS" 
+.PP 
+This program follows the usual GNU command line syntax, 
+with long options starting with two dashes (`\-').  A summary of 
+options is included below. 
+.IP "\fB\-\-arts-prefix\fP         " 10 
+This is the prefix used when libartsc was installed. 
+.IP "\fB\-\-arts-version\fP         " 10 
+Outputs version information about the installed arts. 
+.IP "\fB\-\-cflags\fP         " 10 
+Set of compiler options (CFLAGS) to use when compiling files that use libartsc. 
+.IP "\fB\-\-libs\fP         " 10 
+Shows the complete set of libs and other linker options you will need in order to link your application with libartsc. 
+.IP "\fB\-\-version\fP         " 10 
+Outputs version information about the installed libartsc. 
+.SH "AUTHOR" 
+.PP 
+This manual page was written by Chris Cheney 
+<[email protected]> for the \fBDebian\fP system (but may be used by 
+others).  Permission is granted to copy, distribute and/or 
+modify this document under the terms of the GNU General Public 
+License, Version 2 or any later version published by the Free 
+Software Foundation. 
+ 
+.PP 
+On Debian systems, the complete text of the GNU General 
+Public License can be found in /usr/share/common-licenses/GPL. 
+ 
+.\" created by instant / docbook-to-man 
diff --git a/doc/man/artscat-trinity.1 b/doc/man/artscat-trinity.1
new file mode 100644
index 0000000..7c809df
--- /dev/null
+++ b/doc/man/artscat-trinity.1
@@ -0,0 +1,43 @@
+.TH "ARTSCAT" "1" 
+.SH "NAME" 
+artscat \(em pipe data to sound device 
+.SH "SYNOPSIS" 
+.PP 
+\fBartscat\fR [\fB\fI options \fR\fP]  [\fB\fI filename \fR\fP]  
+.SH "DESCRIPTION" 
+.PP 
+This manual page documents briefly the 
+\fBartscat\fR command. 
+.PP 
+\fBartscat\fR pipes data from a pipe to the sound device through arts. 
+.SH "OPTIONS" 
+.PP 
+This program follows the usual GNU command line syntax, 
+with long options starting with two dashes (`\-').  A summary of 
+options is included below. 
+.IP "\fB-b \fIbits\fR\fP         " 10 
+set number of bits (8 or 16) 
+.IP "\fB-c \fIchannels\fR\fP         " 10 
+set number of channels (1 or 2) 
+.IP "\fB-h\fP         " 10 
+display help and exit 
+.IP "\fB-r \fIsamplingrate\fR\fP         " 10 
+set samplingrate to use 
+.IP "\fB-t \fItitle\fR\fP         " 10 
+set stream title 
+.IP "\fB-v\fP         " 10 
+show version 
+.SH "AUTHOR" 
+.PP 
+This manual page was written by Chris Cheney 
+<[email protected]> for the \fBDebian\fP system (but may be used by 
+others).  Permission is granted to copy, distribute and/or 
+modify this document under the terms of the GNU General Public 
+License, Version 2 or any later version published by the Free 
+Software Foundation. 
+ 
+.PP 
+On Debian systems, the complete text of the GNU General 
+Public License can be found in /usr/share/common-licenses/GPL. 
+ 
+.\" created by instant / docbook-to-man 
diff --git a/doc/man/artsdsp-trinity.1 b/doc/man/artsdsp-trinity.1
new file mode 100644
index 0000000..2615f47
--- /dev/null
+++ b/doc/man/artsdsp-trinity.1
@@ -0,0 +1,31 @@
+.TH ARTSDSP "1" "February 2008" "artsdsp" "User Commands"
+.SH NAME
+artsdsp \- manual page for artsdsp
+.SH DESCRIPTION
+artsdsp \- attempt to reroute audio device to artsd
+.PP
+artsdsp [options] binary
+.PP
+options:
+.TP
+.B \-h, \-\-help
+Show brief help.
+.TP
+.B \-n, \-\-name\fR=\fINAME\fR
+Use name to identify player to artsd.
+.TP
+.B \-m, \-\-mmap
+Emulate memory mapping (i.e. for quake).
+.TP
+.B \-s, \-\-single\-threaded
+Use the single\-threaded version.
+.TP
+.B \-v, \-\-verbose
+Show parameters.
+.TP
+.B \-V, \-\-version
+Show version.
+.PP
+This manual page was written by Fathi Boudra <[email protected]>,
+for the Debian project (but may be used by others).
+