# Makefile.in generated by automake 1.10.1 from Makefile.am. # KDE tags expanded automatically by am_edit - $Revision: 483858 $ # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = ka/messages DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = #>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ #>- html-recursive info-recursive install-data-recursive \ #>- install-dvi-recursive install-exec-recursive \ #>- install-html-recursive install-info-recursive \ #>- install-pdf-recursive install-ps-recursive install-recursive \ #>- installcheck-recursive installdirs-recursive pdf-recursive \ #>- ps-recursive uninstall-recursive #>+ 7 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) #>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) #>+ 1 #>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) #>+ 1 DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ ARTSCCONFIG = @ARTSCCONFIG@ AUTOCONF = @AUTOCONF@ AUTODIRS = @AUTODIRS@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOPIDLNG = @DCOPIDLNG@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ KCONFIG_COMPILER = @KCONFIG_COMPILER@ KDECONFIG = @KDECONFIG@ KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_USE_FPIE = @KDE_USE_FPIE@ KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ KDE_USE_PIE = @KDE_USE_PIE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LDFLAGS = @LDFLAGS@ LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBJPEG = @LIBJPEG@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBRESOLV = @LIBRESOLV@ LIBS = @LIBS@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KABC = @LIB_KABC@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDED = @LIB_KDED@ LIB_KDEPIM = @LIB_KDEPIM@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KDNSSD = @LIB_KDNSSD@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMPROXY = @LIB_KIMPROXY@ LIB_KIO = @LIB_KIO@ LIB_KJS = @LIB_KJS@ LIB_KNEWSTUFF = @LIB_KNEWSTUFF@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_KUNITTEST = @LIB_KUNITTEST@ LIB_KUTILS = @LIB_KUTILS@ LIB_POLL = @LIB_POLL@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LIB_XRENDER = @LIB_XRENDER@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MKDIR_P = @MKDIR_P@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ QTE_NORTTI = @QTE_NORTTI@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XMKMF = @XMKMF@ XMLLINT = @XMLLINT@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ X_RPATH = @X_RPATH@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ all_includes = @all_includes@ all_libraries = @all_libraries@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_kcfgdir = @kde_kcfgdir@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ kdeinitdir = @kdeinitdir@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ x_includes = @x_includes@ x_libraries = @x_libraries@ xdg_appsdir = @xdg_appsdir@ xdg_directorydir = @xdg_directorydir@ xdg_menudir = @xdg_menudir@ KDE_LANG = ka #>- SUBDIRS = $(AUTODIRS) #>+ 1 SUBDIRS =. #>- POFILES = AUTO #>+ 2 POFILES = k3b.po libk3b.po libk3bdevice.po k3bsetup.po GMOFILES = k3b.gmo libk3b.gmo libk3bdevice.gmo k3bsetup.gmo #>- all: all-recursive #>+ 1 all: all-nls docs-am all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) #>- @for dep in $?; do \ #>- case '$(am__configure_deps)' in \ #>- *$$dep*) \ #>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ #>- && exit 0; \ #>- exit 1;; \ #>- esac; \ #>- done; \ #>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ka/messages/Makefile'; \ #>- cd $(top_srcdir) && \ #>- $(AUTOMAKE) --gnu ka/messages/Makefile #>+ 12 @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ka/messages/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu ka/messages/Makefile cd $(top_srcdir) && perl admin/am_edit ka/messages/Makefile.in .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags #>- distdir: $(DISTFILES) #>+ 1 distdir: distdir-nls $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive #>- uninstall: uninstall-recursive #>+ 1 uninstall: uninstall-nls uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." #>- clean: clean-recursive #>+ 1 clean: kde-rpo-clean clean-recursive #>- clean-am: clean-generic clean-libtool mostlyclean-am #>+ 1 clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: #>- install-data-am: #>+ 1 install-data-am: install-nls install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: #>- maintainer-clean: maintainer-clean-recursive #>+ 1 maintainer-clean: clean-nls maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 KDE_DIST=Makefile.in libk3bdevice.po libk3b.po k3b.po k3bsetup.po Makefile.am #>+ 13 k3b.gmo: k3b.po rm -f k3b.gmo; $(GMSGFMT) -o k3b.gmo $(srcdir)/k3b.po test ! -f k3b.gmo || touch k3b.gmo libk3b.gmo: libk3b.po rm -f libk3b.gmo; $(GMSGFMT) -o libk3b.gmo $(srcdir)/libk3b.po test ! -f libk3b.gmo || touch libk3b.gmo libk3bdevice.gmo: libk3bdevice.po rm -f libk3bdevice.gmo; $(GMSGFMT) -o libk3bdevice.gmo $(srcdir)/libk3bdevice.po test ! -f libk3bdevice.gmo || touch libk3bdevice.gmo k3bsetup.gmo: k3bsetup.po rm -f k3bsetup.gmo; $(GMSGFMT) -o k3bsetup.gmo $(srcdir)/k3bsetup.po test ! -f k3bsetup.gmo || touch k3bsetup.gmo #>+ 3 clean-nls: -rm -f k3b.gmo libk3b.gmo libk3bdevice.gmo k3bsetup.gmo #>+ 10 install-nls: $(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES @for base in k3b libk3b libk3bdevice k3bsetup ; do \ echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\ fi ;\ done #>+ 6 uninstall-nls: rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/k3b.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libk3b.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/libk3bdevice.mo rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/k3bsetup.mo #>+ 2 all-nls: $(GMOFILES) #>+ 8 distdir-nls:$(GMOFILES) for file in $(POFILES); do \ cp $(srcdir)/$$file $(distdir); \ done for file in $(GMOFILES); do \ cp $(srcdir)/$$file $(distdir); \ done #>+ 2 docs-am: #>+ 15 force-reedit: @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu ka/messages/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu ka/messages/Makefile cd $(top_srcdir) && perl admin/am_edit ka/messages/Makefile.in #>+ 21 clean-bcheck: rm -f *.bchecktest.cc *.bchecktest.cc.class a.out bcheck: bcheck-recursive bcheck-am: @for i in ; do \ if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ echo "$$i"; \ if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ rm -f $$i.bchecktest.cc; exit 1; \ fi ; \ echo "" >> $$i.bchecktest.cc.class; \ perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ rm -f a.out; \ fi ; \ done #>+ 3 final: $(MAKE) all-am #>+ 3 final-install: $(MAKE) install-am #>+ 3 no-final: $(MAKE) all-am #>+ 3 no-final-install: $(MAKE) install-am #>+ 3 kde-rpo-clean: -rm -f *.rpo #>+ 3 nmcheck: nmcheck-am: nmcheck