From 879d11940771d832e987da215de9f0f396786a3f Mon Sep 17 00:00:00 2001 From: gregory guy Date: Fri, 5 Jun 2020 15:35:30 +0200 Subject: Drop automake build support. Add basic cmake build instructions. Delete empty file NEWS and rpm spec files. Better detection for OpenSSL headers and libraries. Write a README file. Rework of the help page. Some cosmetics. Signed-off-by: gregory guy (cherry picked from commit 11c5062539a42b939727a3f0f8a6fbacc1b238be) --- .gitmodules | 3 - CMakeLists.txt | 10 +- ConfigureChecks.cmake | 29 +- INSTALL | 173 +- Makefile.am | 23 - Makefile.cvs | 10 - NEWS | 1 - README | 26 + acinclude.m4 | 11262 --------------------------------------------- aclocal.m4 | 928 ---- admin | 1 - config.h.in | 222 - configure.files | 2 - configure.in | 90 - configure.in.in | 6 - doc/Makefile.am | 6 - doc/en/Makefile.am | 2 - doc/en/index.docbook | 38 +- kasablanca.kdevelop.spec | 49 - kasablanca.spec | 49 - po/Makefile.am | 1 - src/CMakeLists.txt | 4 +- src/Makefile.am | 36 - stamp-h.in | 0 subdirs | 3 - 25 files changed, 93 insertions(+), 12881 deletions(-) delete mode 100644 Makefile.am delete mode 100644 Makefile.cvs delete mode 100644 NEWS delete mode 100644 acinclude.m4 delete mode 100644 aclocal.m4 delete mode 160000 admin delete mode 100644 config.h.in delete mode 100644 configure.files delete mode 100644 configure.in delete mode 100644 configure.in.in delete mode 100644 doc/Makefile.am delete mode 100644 doc/en/Makefile.am delete mode 100644 kasablanca.kdevelop.spec delete mode 100644 kasablanca.spec delete mode 100644 po/Makefile.am delete mode 100644 src/Makefile.am delete mode 100644 stamp-h.in delete mode 100644 subdirs diff --git a/.gitmodules b/.gitmodules index d817995..ce2e35a 100644 --- a/.gitmodules +++ b/.gitmodules @@ -1,6 +1,3 @@ -[submodule "admin"] - path = admin - url = https://scm.trinitydesktop.org/scm/git/tde-common-admin [submodule "cmake"] path = cmake url = https://scm.trinitydesktop.org/scm/git/tde-common-cmake diff --git a/CMakeLists.txt b/CMakeLists.txt index 6ae9a2d..464019f 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -41,15 +41,15 @@ tde_setup_paths( ) ##### optional stuff -option( WITH_ALL_OPTIONS "Enable all optional support" OFF ) +option( WITH_ALL_OPTIONS "Enable all optional support" OFF ) option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} ) ##### user requested modules -option( BUILD_ALL "Build all" ON ) -option( BUILD_DOC "Build documentation" ${BUILD_ALL} ) -option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} ) +option( BUILD_ALL "Build all" ON ) +option( BUILD_DOC "Build documentation" ${BUILD_ALL} ) +option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} ) ##### configure checks @@ -69,7 +69,7 @@ set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" ##### directories add_subdirectory( src ) -tde_conditional_add_subdirectory( BUILD_DOC doc ) +tde_conditional_add_subdirectory( BUILD_DOC doc ) tde_conditional_add_subdirectory( BUILD_TRANSLATIONS po ) diff --git a/ConfigureChecks.cmake b/ConfigureChecks.cmake index 09af851..213e8ba 100644 --- a/ConfigureChecks.cmake +++ b/ConfigureChecks.cmake @@ -27,7 +27,28 @@ endif( WITH_GCC_VISIBILITY ) ##### check for OpenSSL -find_package( OpenSSL ) -if( NOT OPENSSL_FOUND ) - tde_message_fatal( "SSL support is required but OpenSSL was not found on your system" ) -endif( NOT OPENSSL_FOUND ) +pkg_search_module( SSL openssl ) + +if( NOT SSL_FOUND ) + check_include_file( openssl/ssl.h HAVE_OPENSSL_H ) + check_library_exists( ssl OPENSSL_init_ssl "" HAVE_LIBSSL_11 ) + check_library_exists( crypto EVP_EncryptInit_ex "" HAVE_LIBCRYPTO ) + + if( NOT HAVE_LIBSSL_11 ) + check_library_exists( ssl SSL_library_init "" HAVE_LIBSSL ) + endif() + + if( HAVE_OPENSSL_H AND HAVE_LIBCRYPTO AND (HAVE_LIBSSL_11 OR HAVE_LIBSSL) ) + set( SSL_FOUND 1 CACHE INTERNAL "" FORCE ) + find_file( OPENSSLV_H openssl/opensslv.h ) + file( STRINGS "${OPENSSLV_H}" SSL_VERSION REGEX "#[ \t]*define[ \t]*OPENSSL_VERSION_TEXT" ) + string( REGEX REPLACE "# *define[ \t]*OPENSSL_VERSION_TEXT[ \t]*\"[^0-9 ]* *([^ ]*).*" "\\1" SSL_VERSION "${SSL_VERSION}" ) + set( SSL_VERSION "${SSL_VERSION}" CACHE INTERNAL "" FORCE ) + message( STATUS "Found OpenSSL: version ${SSL_VERSION}" ) + set( SSL_LIBRARIES "ssl;crypto" CACHE INTERNAL "ssl and crypto libs" FORCE ) + endif() +endif( NOT SSL_FOUND ) + +if( NOT SSL_FOUND ) + tde_message_fatal( "SSL support is required but OpenSSL was not found on your system" ) +endif( NOT SSL_FOUND ) diff --git a/INSTALL b/INSTALL index 02a4a07..f908894 100644 --- a/INSTALL +++ b/INSTALL @@ -1,167 +1,18 @@ Basic Installation ================== - These are generic installation instructions. + -DCMAKE_INSTALL_PREFIX="/opt/trinity" \ + -DCONFIG_INSTALL_DIR="/etc/trinity" \ + -DSYSCONF_INSTALL_DIR="/etc" \ + -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \ + -DCMAKE_BUILD_TYPE=RelWithDebInfo \ + -DCMAKE_VERBOSE_MAKEFILE="ON" \ + -DCMAKE_SKIP_RPATH="OFF" \ + -DBUILD_ALL="ON" \ + -DWITH_ALL_OPTIONS="ON" - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes a while. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Type `make install' to install the programs and any data files and - documentation. - - 4. You can remove the program binaries and object files from the - source code directory by typing `make clean'. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: - CPU-COMPANY-SYSTEM - -See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. - - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Operation Controls -================== - - `configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`configure' also accepts some other, not widely useful, options. +Requirement +=========== + - OpenSSL diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 284161b..0000000 --- a/Makefile.am +++ /dev/null @@ -1,23 +0,0 @@ -SUBDIRS = $(TOPSUBDIRS) - -$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; - -$(top_srcdir)/subdirs: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs - -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in - @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 - -MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files - -package-messages: - $(MAKE) -f $(top_srcdir)/admin/Makefile.common package-messages - $(MAKE) -C po merge - -EXTRA_DIST = admin COPYING configure.in.in - -dist-hook: - cd $(top_distdir) && perl admin/am_edit -padmin - cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs -METASOURCES = AUTO diff --git a/Makefile.cvs b/Makefile.cvs deleted file mode 100644 index 4c0afd1..0000000 --- a/Makefile.cvs +++ /dev/null @@ -1,10 +0,0 @@ -all: - @echo "This Makefile is only for the CVS repository" - @echo "This will be deleted before making the distribution" - @echo "" - $(MAKE) -f admin/Makefile.common cvs - -dist: - $(MAKE) -f admin/Makefile.common dist - -.SILENT: diff --git a/NEWS b/NEWS deleted file mode 100644 index 0519ecb..0000000 --- a/NEWS +++ /dev/null @@ -1 +0,0 @@ - \ No newline at end of file diff --git a/README b/README index 8b13789..bebf8e6 100644 --- a/README +++ b/README @@ -1 +1,27 @@ + kasablanca - an ftp client for TDE. + + +Kasablanca is graphical ftp client for the Trinity Desktop, amongst its +features are support for: + + * ftps encryption via AUTH TLS + * fxp (direct server to server transfer), supporting alternative mode + * advanced bookmarking system + * fast responsive multithreaded engine + * concurrent connections to multiple hosts + * interactive transfer queue, movable by drag and drop + * small nifty features, like a skiplist + * bookmarks and queues. + + + CONTRIBUTING +============== + +If you wish to contribute to Kasablanca (TDE), you might do so: + +- TDE Gitea Workspace (TGW) collaboration tool. + https://mirror.git.trinitydesktop.org/gitea + +- TDE Weblate Translation Workspace (TWTW) collaboration tool. + https://mirror.git.trinitydesktop.org/weblate diff --git a/acinclude.m4 b/acinclude.m4 deleted file mode 100644 index 13c61d7..0000000 --- a/acinclude.m4 +++ /dev/null @@ -1,11262 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for tdelibs -dnl and tdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN([KDE_PATH_X_DIRECT], -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK(, [${x_direct_test_function}()], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_FIND_FILE], -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, -dnl if-not-found, test-parameter) -AC_DEFUN([KDE_FIND_PATH], -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - dirs="$3" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN([KDE_MOC_ERROR_MESSAGE], -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN([KDE_UIC_ERROR_MESSAGE], -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN([KDE_CHECK_UIC_FLAG], -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_MOC_UIC], -[ - AC_REQUIRE([KDE_CHECK_PERL]) - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - else - UIC=$UIC_PATH - - if test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN([KDE_1_CHECK_PATHS], -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN([KDE_SET_PATHS], -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_kcfgdir=\"$kde_kcfgdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_menudir=\"$xdg_menudir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN([KDE_SET_DEFAULT_PATHS], -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${datadir}/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${datadir}/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${datadir}/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${datadir}/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${datadir}/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${datadir}/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${datadir}/config' - fi - if test -z "$kde_kcfgdir"; then - kde_kcfgdir='\${datadir}/config.kcfg' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${datadir}/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${datadir}/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${datadir}/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${datadir}/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${datadir}/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${datadir}/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications/kde' - fi - if test -z "$xdg_menudir"; then - xdg_menudir='\${sysconfdir}/xdg/menus' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_kcfgdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN([KDE_MISSING_PROG_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN([KDE_MISSING_ARTS_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly or use ---without-arts to compile without aRts support (this will remove functionality). -]) -]) - -AC_DEFUN([KDE_SUBST_PROGRAMS], -[ - AC_ARG_WITH(arts, - [ --without-arts build without aRts [default=yes] ], - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no") - - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" != "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs]) - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - kde32ornewer=1 - if test "$kde_qtver" -lt 3; then - kde32ornewer= - else - if test "$kde_qtver" = "3" && test "$kde_qtsubver" -le 1; then - kde32ornewer= - fi - fi - - if test -n "$kde32ornewer"; then - KDE_FIND_PATH(tdeconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(tdeconfig_compiler)]) - KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) - fi - KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin /usr/local/bin /opt/local/bin], [XMLLINT=""]) - - if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - if test -n "$kde32ornewer"; then - KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' - DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' - AC_SUBST(KCONFIG_COMPILER) - AC_SUBST(KCFG_DEPENDENCIES) - AC_SUBST(DCOPIDLNG) - fi - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(KDECONFIG) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - AC_SUBST(XMLLINT) - - if test -x "$KDECONFIG"; then # it can be "compiled" - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - else - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - fi - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) -])dnl - -AC_DEFUN([AC_CREATE_KFSSTND], -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_menudir= xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN([AC_SUBST_KFSSTND], -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_kcfgdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_menudir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(tdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN([KDE_MISC_TESTS], -[ - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # sys/bitypes.h is needed for uint32_t and friends on Tru64 - AC_CHECK_HEADERS(sys/bitypes.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-Xlinker -framework -Xlinker CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - -# darwin needs this to initialize the environment -AC_CHECK_HEADERS(crt_externs.h) -AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - -AH_VERBATIM(_DARWIN_ENVIRON, -[ -#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) -# include -# include -# define environ (*_NSGetEnviron()) -#endif -]) - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([K_PATH_X], -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - [ --enable-embedded link to Qt-embedded, don't use X], - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -AC_ARG_ENABLE( - mac, - [ --enable-mac link to Qt/Mac (don't use X)], - kde_use_qt_mac=$enableval, - kde_use_qt_mac=no -) - -if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then - -AC_MSG_CHECKING(for X) - -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS" - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -LDFLAGS="$ac_save_LDFLAGS" - -LIB_X11='-lX11 $(LIBSOCKET)' - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no -) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe -]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -elif test "$kde_use_qt_emb" = "yes"; then - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -elif test "$kde_use_qt_mac" = "yes"; then - dnl We're using QT/Mac (I use QT_MAC so that ntqglobal.h doesn't *have* to - dnl be included to get the information) --Sam - CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" - CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -fi -AC_SUBST(X_PRE_LIBS) -AC_SUBST(LIB_X11) -AC_SUBST(LIB_XRENDER) -AC_SUBST(LIBSM) -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_includes) -AC_SUBST(x_libraries) -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - -]) - -AC_DEFUN([KDE_PRINT_QT_PROGRAM], -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_1_3], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - [ --disable-mt link to non-threaded Qt (deprecated)], - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-tqt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -if test -z "$LIBQT"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" - else - qtlib="qt" - fi - - kde_int_qt="-l$qtlib" -else - kde_int_qt="$LIBQT" - kde_lib_qt_set=yes -fi - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-tqt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - if test -z "$LIBQT"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - else - LIBQT="$qtlib-mt" - kde_int_qt="$qtlib-mt" - fi - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - [ --with-qt-dir=DIR where the root of Qt is installed ], - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - [ --with-qt-includes=DIR where the Qt includes are. ], - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - [ --with-qt-libraries=DIR where the Qt library is installed.], - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=ntqstyle.h -else - kde_qt_header=ntqglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIBQT="$LIBQT ${kde_int_qt}_incremental" - break - fi -done - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then - KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$all_libraries $QT_LDFLAGS" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIB_QT="$LIB_QT ${kde_int_qt}_incremental" - break - fi -done - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN([AC_PATH_QT], -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN([KDE_CHECK_UIC_PLUGINS], -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - # if you're trying to debug this check and think it's incorrect, - # better check your installation. The check _is_ correct - your - # installation is not. - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([you need to install tdelibs first.]) -fi -fi -]) - -AC_DEFUN([KDE_CHECK_FINAL], -[ - AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN([KDE_CHECK_CLOSURE], -[ - AC_ARG_ENABLE(closure, [ --enable-closure delay template instantiation], - kde_use_closure=$enableval, kde_use_closure=no) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_NO_UNDEFINED="" - case $host in - *-*-linux-gnu) - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - ;; - esac - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -AC_DEFUN([KDE_CHECK_NMCHECK], -[ - AC_ARG_ENABLE(nmcheck, [ --enable-nmcheck enable automatic namespace cleanness check], - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - -AC_DEFUN([KDE_EXPAND_MAKEVAR], [ -savex=$exec_prefix -test "x$exec_prefix" = xNONE && exec_prefix=$prefix -tmp=$$2 -while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done -exec_prefix=$savex -]) - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_BASE_PATH_KDE], -[ -AC_REQUIRE([KDE_CHECK_STL]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${includedir} - KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) - - kde_libraries=${libdir} - KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) - -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z "$1"; then - -kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by tdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1 - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes="${includedir}" - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$all_libraries $KDE_LDFLAGS" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN([KDE_CHECK_EXTRA_LIBS], -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR - adds non standard include paths], - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_menudir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - CPPFLAGS="$all_includes $CPPFLAGS" - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_CHECK_KDEQTADDON], -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN([KDE_CHECK_KIMGIO], -[ - AC_REQUIRE([AC_BASE_PATH_KDE]) - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - AC_REQUIRE([AC_FIND_TIFF]) - AC_REQUIRE([AC_FIND_JPEG]) - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JASPER]) - AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) - - if test "$1" = "existence"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" - AC_CHECK_LIB(kimgio, kimgioRegister, [ - LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) - LIBS="$kde_save_LIBS" - AC_LANG_RESTORE - else - LIBKIMGIO_EXISTS=yes - fi - - if test "$LIBKIMGIO_EXISTS" = "yes"; then - LIB_KIMGIO='-lkimgio' - else - LIB_KIMGIO='' - fi - AC_SUBST(LIB_KIMGIO) -]) - -AC_DEFUN([KDE_CREATE_LIBS_ALIASES], -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-ltdeabc") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") - AC_SUBST(LIB_TDEUTILS, "-ltdeutils") - AC_SUBST(LIB_TDEPIM, "-ltdepim") -# these are for backward compatibility - AC_SUBST(LIB_TDESYCOCA, "-ltdeio") - AC_SUBST(LIB_KFILE, "-ltdeio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-ltdefile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -else - AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)") - AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)") -fi -]) - -AC_DEFUN([AC_PATH_KDE], -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN([KDE_CHECK_FUNC_EXT], -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libtdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -$4; -#ifdef __cplusplus -} -#endif -#endif -]) -]) - -AC_DEFUN([AC_CHECK_SETENV], -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN([AC_CHECK_UNSETENV], -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN([AC_CHECK_GETDOMAINNAME], -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [#include - int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN([AC_CHECK_GETHOSTNAME], -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN([AC_CHECK_USLEEP], -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN([AC_CHECK_RANDOM], -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN([AC_CHECK_INITGROUPS], -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMPS], -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN([AC_CHECK_MKDTEMP], -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN([AC_CHECK_RES_INIT], -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - AC_MSG_CHECKING([if res_init is available]) - AC_TRY_COMPILE( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) -]) - -AC_DEFUN([AC_CHECK_STRLCPY], -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN([AC_CHECK_STRLCAT], -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN([AC_FIND_GIF], - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the tdesupport package) -fi -]) - -AC_DEFUN([KDE_FIND_JPEG_HELPER], -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [jpeg_CreateDecompress(0L, 0, 0);], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN([AC_FIND_JPEG], -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in tdehtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN([KDE_CHECK_QT_JPEG], -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN([AC_FIND_ZLIB], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN([KDE_TRY_TIFFLIB], -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN([AC_FIND_TIFF], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - - -AC_DEFUN([AC_FIND_PNG], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN([AC_FIND_JASPER], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN([AC_CHECK_BOOL], -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN([KDE_CHECK_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CC supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_C - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) - CFLAGS="$save_CFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN([AC_REMOVE_FORBIDDEN], -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN([AC_VALIDIFY_CXXFLAGS], -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN([AC_CHECK_COMPILERS], -[ - AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) - - AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,[ --disable-warnings disables compilation with -Wall and similiar], - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 -fno-inline $CFLAGS" - else - CFLAGS="-g -O2 $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 -fno-inline $CXXFLAGS" - else - CXXFLAGS="-g -O2 $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - CXXFLAGS="-Wall -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - case $host in - *-*-linux-gnu) - CFLAGS="-ansi -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) - KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - if test "$GXX" = "yes"; then - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - fi - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], - [ - kde_use_pch=$enableval - ],[kde_use_pch=no]) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN([KDE_ADD_DEPENDENCIES], -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN([KDE_PROG_LIBTOOL], -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_OBJEXT -AC_EXEEXT - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -# we patch configure quite some so we better keep that consistent for incremental runs -AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') -]) - -AC_DEFUN([KDE_CHECK_LIB64], -[ - tdelibsuff=no - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none[=default])]), - tdelibsuff=$enableval) - # TODO: add an auto case that compiles a little C app to check - # where the glibc is - if test "$tdelibsuff" = "no"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $tdelibsuff]) - fi -]) - -AC_DEFUN([KDE_CHECK_TYPES], -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(short)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -AC_DEFUN([KDE_DO_IT_ALL], -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN([AC_CHECK_RPATH], -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - [ --disable-rpath do not use the rpath feature of ld], - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(kde_libraries)" - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN([AC_CHECK_SOCKLEN_T], [ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(ac_cv_socklen_t, [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ -#include -#include - ],[ -socklen_t a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=socklen_t, - AC_TRY_COMPILE([ -#include -#include - ],[ -int a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=int, - ac_cv_socklen_t=size_t - ) - ) - AC_LANG_RESTORE - ]) - - AC_MSG_RESULT($ac_cv_socklen_t) - if test "$ac_cv_socklen_t" != "socklen_t"; then - AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, - [Define the real type of socklen_t]) - fi - AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) - -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN([AM_KDE_WITH_NLS], - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN([AM_LC_MESSAGES], - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN([AM_KDE_GNU_GETTEXT], - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN([AC_HAVE_XPM], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN([AC_HAVE_DPMS], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - LIBS="$LIBS -lXdpms" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - ac_save_cflags="$CFLAGS" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, - [Define if you have the DPMSCapable prototype in ]) - AC_CHECK_DECL(DPMSCapable, - AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, - [#include ]) - AH_TEMPLATE(HAVE_DPMSINFO_PROTO, - [Define if you have the DPMSInfo prototype in ]) - AC_CHECK_DECL(DPMSInfo, - AC_DEFINE(HAVE_DPMSINFO_PROTO),, - [#include ]) - CFLAGS="$ac_save_cflags" - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN([AC_HAVE_GL], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags="$LDFLAGS" - ac_save_cxxflags="$CXXFLAGS" - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" - test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="mesa", ac_cv_have_gl="no") - if test "x$ac_cv_have_gl" = "xno"; then - LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL" - test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$ac_save_cflags $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - fi - AC_LANG_RESTORE - LDFLAGS="$ac_save_ldflags" - CXXFLAGS="$ac_save_cxxflags" - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)' - else - GLLIB='-lGLU -lGL $(LIB_X11)' - fi - else - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN([KDE_PAM], [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - want_pam= - AC_ARG_WITH(pam, - [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], - [ if test "x$withval" = "xyes"; then - want_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - want_pam=no - else - want_pam=yes - pam_service=$withval - fi - ], [ pam_service=kde ]) - - use_pam= - PAMLIBS= - if test "x$want_pam" != xno; then - AC_CHECK_LIB(pam, pam_start, [ - AC_CHECK_HEADER(security/pam_appl.h, - [ pam_header=security/pam_appl.h ], - [ AC_CHECK_HEADER(pam/pam_appl.h, - [ pam_header=pam/pam_appl.h ], - [ - AC_MSG_WARN([PAM detected, but no headers found! -Make sure you have the necessary development packages installed.]) - ] - ) - ] - ) - ], , $LIBDL) - if test -z "$pam_header"; then - if test "x$want_pam" = xyes; then - AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) - fi - else - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - use_pam=yes - - dnl darwin claims to be something special - if test "$pam_header" = "pam/pam_appl.h"; then - AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) - fi - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], $pam_header, - [ AC_EGREP_HEADER([const struct pam_message], $pam_header, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN([DEF_PAM_SERVICE], [ - AC_ARG_WITH($1-pam, - [ --with-$1-pam=[val] override PAM service from --with-pam for $2], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE=$withval - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN([KDE_SHADOWPASSWD], [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - [ --with-shadow If you want shadow password support ], - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN([KDE_PASSWDLIBS], [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN([KDE_CHECK_LIBDL], -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN([KDE_CHECK_DLOPEN], -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -[ --disable-dlopen link statically [default=no]] , -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN([KDE_ADD_INCLUDES], -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - -AC_DEFUN([KDE_CHECK_LIBPTHREAD], -[ - LIBPTHREAD="" - - if test -n "$PTHREAD_LIBS"; then - PTHREAD_LIBS_save="$PTHREAD_LIBS" - PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` - KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [LIBPTHREAD="$PTHREAD_LIBS_save"] ) - PTHREAD_LIBS="$PTHREAD_LIBS_save" - fi - - if test -z "$LIBPTHREAD"; then - AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) - fi - - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], -[ - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_THREADING], -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN([KDE_TRY_LINK_PYTHON], -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi - -fi - -]) - -AC_DEFUN([KDE_CHECK_PYTHON_DIR], -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -[ --with-pythondir=pythondir use python installed in pythondir ], -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN([KDE_CHECK_PYTHON_INTERN], -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib$tdelibsuff /usr/lib$tdelibsuff /usr/local /usr/lib$tdelibsuff $kde_extra_libs" -AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.so; then - AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) - if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_PYTHON], -[ - KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_STL], -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - - AC_MSG_CHECKING([if C++ programs can be compiled]) - AC_CACHE_VAL(kde_cv_stl_works, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_works=yes, - kde_cv_stl_works=no) -]) - - AC_MSG_RESULT($kde_cv_stl_works) - - if test "$kde_cv_stl_works" = "yes"; then - # back compatible - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - else - AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. -Check config.log for details - if you're using a Linux distribution you might miss -a package named similiar to libstd++-dev.]) - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN([AC_FIND_QIMGIO], - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN([AM_DISABLE_LIBRARIES], -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN([AC_CHECK_UTMP_FILE], -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN([KDE_CREATE_SUBDIRSLIST], -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - TOPSUBDIRS="" - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -ac_topsubdirs= -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -elif test -s $srcdir/subdirs; then - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.@]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN([KDE_CHECK_NAMESPACES], -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_S_ISSOCK], -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN([KDE_CHECK_HEADER], -[ - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_CHECK_HEADERS], -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_FAST_CONFIGURE], -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN([KDE_CONF_FILES], -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -AC_DEFUN([KDE_SET_PREFIX], -[ - unset CDPATH - dnl make $TDEDIR the default for the installation - AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN([TDE_LANG_CPLUSPLUS], -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) TDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -TDE_LANG_CPLUSPLUS -]) - -AC_DEFUN([KDE_CHECK_LONG_LONG], -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN([KDE_CHECK_LIB], -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN([KDE_JAVA_PREFIX], -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN([KDE_CHECK_JAVA_DIR], -[ - -AC_ARG_WITH(java, -[ --with-java=javadir use java installed in javadir, --without-java disables ], -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libgcjdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> collect list of candidate paths - if test -n "$JAVA_HOME"; then - KDE_JAVA_PREFIX($JAVA_HOME) - fi - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/lib/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - if test -d "$dir"; then - javadirs="$javadirs $dir" - fi - done - IFS=$kde_save_IFS - jredirs= - - dnl Now javadirs contains a list of paths that exist, all ending with bin/ - for dir in $javadirs; do - dnl Check for the java executable - if test -x "$dir/java"; then - dnl And also check for a libjvm.so somewhere under there - dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. - if test "$dir" != "/usr/bin"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - fi - done - - dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libgcj.so - kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - - dnl not needed for gcj - - if test "x$kde_java_libgcjdir" = "x"; then - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - fi - - else - JAVAC= - jni_includes= - fi - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - else - if test ! -r "$kde_java_libgcjdir/libgcj.so"; then - AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) - fi - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - dnl not needed for gcj compile - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - if test "x$kde_java_libgcjdir" = "x"; then - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - else - JVMLIBS="-L$kde_java_libgcjdir -lgcj" - fi - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -elif test -d "/Library/Java/Home"; then - kde_java_bindir="/Library/Java/Home/bin" - jni_includes="-I/Library/Java/Home/include" - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - JVMLIBS="-Xlinker -framework -Xlinker JavaVM" - - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([Apple Java Framework]) -else - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN([KDE_NEED_FLEX], -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN([AC_PATH_QTOPIA], -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN([KDE_INIT_DOXYGEN], -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN([AC_FIND_BZIP2], -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([KDE_CHECK_SSL], -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - [ --with-ssl-dir=DIR where the root of OpenSSL is installed], - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$tdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - [ --without-ssl disable SSL checks], - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - if test "$ac_ssl_includes" != "/usr/include"; then - CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" - fi - - if AC_TRY_EVAL(ac_link); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) - fi -fi - -SSL_INCLUDES= - -if test "$ssl_includes" = "/usr/include"; then - if test -f /usr/kerberos/include/krb5.h; then - SSL_INCLUDES="-I/usr/kerberos/include" - fi -elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN([KDE_CHECK_STRLCPY], -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_BINUTILS], -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) - -AC_DEFUN([KDE_CHECK_PERL], -[ - KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ - AC_MSG_ERROR([No Perl found in your $PATH. -We need perl to generate some code.]) - ]) - AC_SUBST(PERL) -]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 -## Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 47 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LINUX_64_MODE="32" - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - LINUX_64_MODE="64" - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then - $2=yes - fi - fi - $rm conftest* -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - testring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s out/conftest.err; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case "$host_cpu" in - ia64*) - shrext='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - esac - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX - - -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 - - -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' - -_LT_AC_SYS_COMPILER - -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) - -# Report which librarie types wil actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C++ test sources. -ac_ext=cc - -# Object file extension for compiled C++ test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - AC_PROG_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - darwin* | rhapsody*) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case "$host_cpu" in - ia64*|hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext='$shrext' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGISTW]]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - case $CC in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - esac - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi4*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - if test "$GXX" = yes ; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) - - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) -]) - -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) - -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_MSG_RESULT([$SED]) -]) diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 8c7060b..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,928 +0,0 @@ -# generated automatically by aclocal 1.8.3 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# -*- Autoconf -*- -# Copyright (C) 2002, 2003 Free Software Foundation, Inc. -# Generated from amversion.in; do not edit by hand. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.3])]) - -# AM_AUX_DIR_EXPAND - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 6 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) -fi])]) - -# serial 7 -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # (even with -Werror). So we grep stderr for any message - # that says an option was ignored. - if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 7 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# Do all the work for Automake. -*- Autoconf -*- - -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 11 - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl - -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $1 | $1:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# -*- Autoconf -*- -# Copyright (C) 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 1 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# -*- Autoconf -*- - - -# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# AM_PROG_MKDIR_P -# --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. - -# Copyright (C) 2003, 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) -AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# -# Check to make sure that the build environment is sane. -# - -# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# AM_PROG_INSTALL_STRIP - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -m4_include([acinclude.m4]) diff --git a/admin b/admin deleted file mode 160000 index f914801..0000000 --- a/admin +++ /dev/null @@ -1 +0,0 @@ -Subproject commit f9148018b2f8a11fd830712c1b508046cc34ff22 diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 96665e0..0000000 --- a/config.h.in +++ /dev/null @@ -1,222 +0,0 @@ -/* config.h.in. Generated from configure.in by autoheader. */ - -/* Define if you have the CoreAudio API */ -#undef HAVE_COREAUDIO - -/* Define to 1 if you have the header file. */ -#undef HAVE_CRT_EXTERNS_H - -/* Defines if your system has the crypt function */ -#undef HAVE_CRYPT - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define if you have libjpeg */ -#undef HAVE_LIBJPEG - -/* Define if you have libpng */ -#undef HAVE_LIBPNG - -/* Define if you have a working libpthread (will enable threaded code) */ -#undef HAVE_LIBPTHREAD - -/* Define if you have libz */ -#undef HAVE_LIBZ - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define if your system needs _NSGetEnviron to set up the environment */ -#undef HAVE_NSGETENVIRON - -/* Define if you have the res_init function */ -#undef HAVE_RES_INIT - -/* Define if you have a STL implementation by SGI */ -#undef HAVE_SGI_STL - -/* Define to 1 if you have the `snprintf' function. */ -#undef HAVE_SNPRINTF - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define if you have strlcat */ -#undef HAVE_STRLCAT - -/* Define if you have the strlcat prototype */ -#undef HAVE_STRLCAT_PROTO - -/* Define if you have strlcpy */ -#undef HAVE_STRLCPY - -/* Define if you have the strlcpy prototype */ -#undef HAVE_STRLCPY_PROTO - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_BITYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the `vsnprintf' function. */ -#undef HAVE_VSNPRINTF - -/* Suffix for lib directories */ -#undef KDELIBSUFF - -/* Define a safe value for MAXPATHLEN */ -#undef KDEMAXPATHLEN - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* The size of a `char *', as computed by sizeof. */ -#undef SIZEOF_CHAR_P - -/* The size of a `int', as computed by sizeof. */ -#undef SIZEOF_INT - -/* The size of a `long', as computed by sizeof. */ -#undef SIZEOF_LONG - -/* The size of a `short', as computed by sizeof. */ -#undef SIZEOF_SHORT - -/* The size of a `size_t', as computed by sizeof. */ -#undef SIZEOF_SIZE_T - -/* The size of a `unsigned long', as computed by sizeof. */ -#undef SIZEOF_UNSIGNED_LONG - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION - -/* Define to 1 if your processor stores words with the most significant byte - first (like Motorola and SPARC, unlike Intel and VAX). */ -#undef WORDS_BIGENDIAN - -/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif - - - -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif - - - -#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) -# include -# include -# define environ (*_NSGetEnviron()) -#endif - - - -#if !defined(HAVE_STRLCAT_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -unsigned long strlcat(char*, const char*, unsigned long); -#ifdef __cplusplus -} -#endif -#endif - - - -#if !defined(HAVE_STRLCPY_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -unsigned long strlcpy(char*, const char*, unsigned long); -#ifdef __cplusplus -} -#endif -#endif - - - -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif - - - -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif - - -/* Compatibility define */ -#undef ksize_t - -/* Define the real type of socklen_t */ -#undef socklen_t diff --git a/configure.files b/configure.files deleted file mode 100644 index 030bce8..0000000 --- a/configure.files +++ /dev/null @@ -1,2 +0,0 @@ -./admin/configure.in.min -configure.in.in diff --git a/configure.in b/configure.in deleted file mode 100644 index 45a2316..0000000 --- a/configure.in +++ /dev/null @@ -1,90 +0,0 @@ -dnl ======================================================= -dnl FILE: ./admin/configure.in.min -dnl ======================================================= - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -# Original Author was Kalle@kde.org -# I lifted it in some mater. (Stephan Kulow) -# I used much code from Janos Farkas - -dnl Process this file with autoconf to produce a configure script. - -AC_INIT(acinclude.m4) dnl a source file from your sub dir - -dnl This is so we can use kde-common -AC_CONFIG_AUX_DIR(admin) - -dnl This ksh/zsh feature conflicts with `cd blah ; pwd` -unset CDPATH - -dnl Checking host/target/build systems, for make, install etc. -AC_CANONICAL_SYSTEM -dnl Perform program name transformation -AC_ARG_PROGRAM - -dnl Automake doc recommends to do this only here. (Janos) -AM_INIT_AUTOMAKE(kasablanca, 0.4.0.2) dnl searches for some needed programs - -KDE_SET_PREFIX - -dnl generate the config header -AM_CONFIG_HEADER(config.h) dnl at the distribution this done - -dnl Checks for programs. -AC_CHECK_COMPILERS -AC_ENABLE_SHARED(yes) -AC_ENABLE_STATIC(no) -KDE_PROG_LIBTOOL - -dnl for NLS support. Call them in this order! -dnl WITH_NLS is for the po files -AM_KDE_WITH_NLS - -KDE_USE_QT(3.2.0) -AC_PATH_KDE -dnl ======================================================= -dnl FILE: configure.in.in -dnl ======================================================= - -#MIN_CONFIG(3.2.0) - -dnl PACKAGE set before -AC_C_BIGENDIAN -AC_CHECK_KDEMAXPATHLEN -AC_CHECK_HEADER([openssl/ssl.h],[],[echo "ERROR: openssl headers not found"; exit;]) -KDE_CREATE_SUBDIRSLIST -AC_CONFIG_FILES([ Makefile ]) -AC_CONFIG_FILES([ doc/Makefile ]) -AC_CONFIG_FILES([ doc/en/Makefile ]) -AC_CONFIG_FILES([ po/Makefile ]) -AC_CONFIG_FILES([ src/Makefile ]) -AC_OUTPUT -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/configure.in.in b/configure.in.in deleted file mode 100644 index 712ea82..0000000 --- a/configure.in.in +++ /dev/null @@ -1,6 +0,0 @@ -#MIN_CONFIG(3.2.0) - -AM_INIT_AUTOMAKE(kasablanca, 0.4.0.2) -AC_C_BIGENDIAN -AC_CHECK_KDEMAXPATHLEN -AC_CHECK_HEADER([openssl/ssl.h],[],[echo "ERROR: openssl headers not found"; exit;]) diff --git a/doc/Makefile.am b/doc/Makefile.am deleted file mode 100644 index 120c827..0000000 --- a/doc/Makefile.am +++ /dev/null @@ -1,6 +0,0 @@ -# the SUBDIRS is filled automatically by am_edit. If files are -# in this directory they are installed into the english dir - -TDE_LANG = en -KDE_DOCS = kasablanca -SUBDIRS = $(AUTODIRS) diff --git a/doc/en/Makefile.am b/doc/en/Makefile.am deleted file mode 100644 index 19a5bda..0000000 --- a/doc/en/Makefile.am +++ /dev/null @@ -1,2 +0,0 @@ -KDE_DOCS = kasablanca -KDE_LANG = en diff --git a/doc/en/index.docbook b/doc/en/index.docbook index 55f7cae..30888ce 100644 --- a/doc/en/index.docbook +++ b/doc/en/index.docbook @@ -83,8 +83,8 @@ Do NOT change these in the translation. --> -&kasablanca; is an ftp client, written in c++, using the kde libraries. among its features are -currently encryption (auth tls) support, fxp, site bookmarks, and queued transfers. +&kasablanca; is an ftp client, written in c++, using the TDE libraries. among its features are +currently encryption (auth tls) support, fxp, site bookmarks and queued transfers. @@ -278,16 +278,11 @@ Documentation copyright 2004 Magnus Kulke sikor_sxe@radicalapproach.d How to obtain &kasablanca; -The most recent sources are available at http://kasablanca.berlios.de. +The most recent sources are available at https://mirror.git.trinitydesktop.org/gitea/TDE/kasablanca. - - -In order to use &kasablanca;, you need at least &kde; 3.2. a recent version of OpenSSL is -required also. - +application --> @@ -306,8 +301,7 @@ information here. --> -In order to use &kasablanca;, you need at least &kde; 3.2. A recent version of OpenSSL is -required also. +In order to use &kasablanca;, you need the TDE libraries as well as an SSL library EG: OpenSSL. @@ -315,11 +309,25 @@ required also. Compilation and Installation - - - + +In order to compile and install &kappname; on your system, first + unpack the source code. Then type the following in the base directory + of the &kappname; distribution: + + + % mkdir -p build + % cd build + % cmake ../ + # make install + + +You will need the header files from the tdelibs library and OpenSSL installed on your system. Please take a look +at the INSTALL file for more cmake options. + +You will need to be root before doing the 'make install' step. -&install.compile.documentation; +Since &kappname; uses cmake you should have no trouble compiling it. Should you +run into problems please report them to the TDE dev team. diff --git a/kasablanca.kdevelop.spec b/kasablanca.kdevelop.spec deleted file mode 100644 index b2cd2de..0000000 --- a/kasablanca.kdevelop.spec +++ /dev/null @@ -1,49 +0,0 @@ -Summary: A Kde Ftp Client -Name: kasablanca -Version: 0.4.0.2 -Release: 1 -Copyright: GPL -Group: Applications/Internet -Source: http://download.berlios.de/kasablanca/kasablanca-0.4.0.1.tar.gz -BuildRoot: /var/tmp/%{name}-buildroot -Provides: kasablanca - -%description -Kasablanca is a TDE ftp client. - -Its main features are: - -- advanced ftp operations like resumed and recursive transfers -- direct remote to remote transfer (fxp) -- ftps encryption on both control and data connection -- enqeueing of files and directories -- high configurability -%prep -%setup - -%build -./configure --prefix=/var/tmp/%{name}-buildroot/opt/kde3 -make - -%install -make install - -%clean -rm -rf /var/tmp/%{name}-buildroot - -%files -/opt/kde3/bin/kasablanca -/opt/kde3/share/applnk/Utilities/kasablanca.desktop -/opt/kde3/share/apps/kasablanca/about.png -/opt/kde3/share/apps/kasablanca/kasablancaui.rc -/opt/kde3/share/config.kcfg/kbconfig.kcfg -/opt/kde3/share/doc/HTML/en/kasablanca/index.cache.bz2 -/opt/kde3/share/doc/HTML/en/kasablanca/index.docbook -/opt/kde3/share/icons/hicolor/128x128/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/16x16/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/22x22/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/32x32/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/48x48/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/64x64/apps/kasablanca.png -/opt/kde3/share/locale/de/LC_MESSAGES/kasablanca.mo -/opt/kde3/share/locale/pl/LC_MESSAGES/kasablanca.mo diff --git a/kasablanca.spec b/kasablanca.spec deleted file mode 100644 index 8377d8a..0000000 --- a/kasablanca.spec +++ /dev/null @@ -1,49 +0,0 @@ -Summary: A Kde Ftp Client -Name: kasablanca -Version: 0.4.0.2 -Release: 1 -Copyright: GPL -Group: Applications/Internet -Source: http://download.berlios.de/kasablanca/kasablanca-0.4.0.2.tar.gz -BuildRoot: /var/tmp/%{name}-buildroot -Provides: kasablanca - -%description -Kasablanca is a TDE ftp client. - -Its main features are: - -- advanced ftp operations like resumed and recursive transfers -- direct remote to remote transfer (fxp) -- ftps encryption on both control and data connection -- enqeueing of files and directories -- high configurability -%prep -%setup - -%build -./configure --prefix=/var/tmp/%{name}-buildroot/opt/kde3 -make - -%install -make install - -%clean -rm -rf /var/tmp/%{name}-buildroot - -%files -/opt/kde3/bin/kasablanca -/opt/kde3/share/applnk/Utilities/kasablanca.desktop -/opt/kde3/share/apps/kasablanca/about.png -/opt/kde3/share/apps/kasablanca/kasablancaui.rc -/opt/kde3/share/config.kcfg/kbconfig.kcfg -/opt/kde3/share/doc/HTML/en/kasablanca/index.cache.bz2 -/opt/kde3/share/doc/HTML/en/kasablanca/index.docbook -/opt/kde3/share/icons/hicolor/128x128/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/16x16/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/22x22/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/32x32/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/48x48/apps/kasablanca.png -/opt/kde3/share/icons/hicolor/64x64/apps/kasablanca.png -/opt/kde3/share/locale/de/LC_MESSAGES/kasablanca.mo -/opt/kde3/share/locale/pl/LC_MESSAGES/kasablanca.mo diff --git a/po/Makefile.am b/po/Makefile.am deleted file mode 100644 index 0fa209c..0000000 --- a/po/Makefile.am +++ /dev/null @@ -1 +0,0 @@ -POFILES = AUTO diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index acff4ad..6b1b857 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -4,7 +4,7 @@ include_directories( ${CMAKE_CURRENT_SOURCE_DIR} ${TDE_INCLUDE_DIR} ${TQT_INCLUDE_DIRS} - ${OPENSSL_INCLUDE_DIR} + ${SSL_INCLUDE_DIRS} ) link_directories( @@ -39,7 +39,7 @@ tde_add_executable( ${PROJECT_NAME} AUTOMOC tdecore-shared tdeui-shared tdeio-shared - ${OPENSSL_LIBRARIES} + ${SSL_LIBRARIES} DESTINATION ${BIN_INSTALL_DIR} ) diff --git a/src/Makefile.am b/src/Makefile.am deleted file mode 100644 index 8cf8cb2..0000000 --- a/src/Makefile.am +++ /dev/null @@ -1,36 +0,0 @@ -# set the include path for X, qt and TDE -INCLUDES = $(all_includes) - -# these are the headers for your project -noinst_HEADERS = kasablanca.h bookmarkdialog.h customconnectdialog.h fileexistsdialog.h kbitem.h ftplib.h ftpsession.h kbfileinfo.h kbdirinfo.h kbtransferitem.h kbtransferdir.h kbtransferfile.h kbtaskview.h kbbookmarkitem.h kbsiteinfo.h importdialog.h kbstatustip.h - -# let automoc handle all of the meta source files (moc) -METASOURCES = AUTO - -messages: rc.cpp - $(XGETTEXT) *.cpp -o $(podir)/kasablanca.pot - -KDE_ICON = kasablanca - -######################################################################### -# APPLICATION SECTION -######################################################################### -# this is the program that gets installed. it's name is used for all -# of the other Makefile.am variables -bin_PROGRAMS = kasablanca - -# the application source, library search path, and link libraries -kasablanca_SOURCES = main.cpp kasablanca.cpp bookmarkdialog.cpp customconnectdialog.cpp fileexistsdialog.cpp kbitem.cpp Q_bookmarkdialog.ui Q_fileexistsdialog.ui Q_mainwindow.ui eventhandler.cpp ftpthread.cpp ftplib.cpp ftpsession.cpp kbfileinfo.cpp kbdirinfo.cpp kbdir.cpp kbfile.cpp kbtransferitem.cpp kbtransferdir.cpp kbtransferfile.cpp kbconfig.kcfgc Q_colorspreferencesdialog.ui Q_generalpreferencesdialog.ui kbtaskview.cpp Q_userinterfacepreferencesdialog.ui kbbookmarkitem.cpp kbsiteinfo.cpp Q_customconnectdialog.ui Q_importdialog.ui importdialog.cpp kbstatustip.cpp -kasablanca_LDFLAGS = $(TDE_RPATH) $(all_libraries) -kasablanca_LDADD = -lssl $(LIB_TDEUI) -lcrypto $(LIB_TDECORE) -lDCOP $(LIB_QT) - -# this is where the desktop file will go -xdg_apps_DATA = kasablanca.desktop - -# this is where the shell's XML-GUI resource file goes -shellrcdir = $(kde_datadir)/kasablanca -shellrc_DATA = kasablancaui.rc about.png - -# this is the config xml -kde_kcfg_DATA=kbconfig.kcfg - diff --git a/stamp-h.in b/stamp-h.in deleted file mode 100644 index e69de29..0000000 diff --git a/subdirs b/subdirs deleted file mode 100644 index 0e67810..0000000 --- a/subdirs +++ /dev/null @@ -1,3 +0,0 @@ -doc -po -src -- cgit v1.2.1