Renaming of files in preparation for code style tools.

Signed-off-by: Michele Calgaro <[email protected]>

1 files changed, 771 insertions, 771 deletions

diff --git a/po/pa.po b/po/pa.po
index 357c3ae..ced8383 100644
--- a/po/pa.po
+++ b/po/pa.po
@@ -29,327 +29,327 @@ msgid ""
 "Your emails"
 msgstr "[email protected],[email protected]"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:50
-#: conduits/malconduit/mal-factory.cc:70
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
+#: conduits/malconduit/mal-factory.cpp:70
 msgid "MAL Synchronization Conduit for KPilot"
 msgstr ""
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:52
-#: conduits/malconduit/mal-factory.cc:72
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
+#: conduits/malconduit/mal-factory.cpp:72
 msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
 msgstr ""
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:56
-#: conduits/abbrowserconduit/abbrowser-setup.cc:54
-#: conduits/knotes/knotes-factory.cc:73 conduits/malconduit/mal-factory.cc:76
-#: conduits/memofileconduit/memofile-factory.cc:69
-#: conduits/notepadconduit/notepad-factory.cc:73
-#: conduits/null/null-factory.cc:71 conduits/recordconduit/factory.cc:72
-#: conduits/sysinfoconduit/sysinfo-setup.cc:101
-#: conduits/timeconduit/time-setup.cc:54
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
+#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
+#: conduits/memofileconduit/memofile-factory.cpp:69
+#: conduits/notepadconduit/notepad-factory.cpp:73
+#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
+#: conduits/timeconduit/time-setup.cpp:54
 msgid "Primary Author"
 msgstr "ਮੂਲ ਲੇਖਕ"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:58
-#: conduits/malconduit/mal-factory.cc:78
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
+#: conduits/malconduit/mal-factory.cpp:78
 msgid "Author of libmal and the JPilot AvantGo conduit"
 msgstr ""
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:60
-#: conduits/malconduit/mal-factory.cc:80
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
+#: conduits/malconduit/mal-factory.cpp:80
 msgid "Author of syncmal"
 msgstr ""
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:62
-#: conduits/malconduit/mal-factory.cc:82
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
+#: conduits/malconduit/mal-factory.cpp:82
 msgid "Authors of the malsync library (c) 1997-1999"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:125
-#: conduits/abbrowserconduit/abbrowser-setup.cc:71
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
 msgid "Addressbook"
 msgstr "ਸਿਰਨਾਵਾਂ-ਕਿਤਾਬ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:291
-#: conduits/vcalconduit/vcal-conduitbase.cc:298
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:298
 msgid ""
 "You chose to sync with the file \"%1\", which cannot be opened. Please make "
 "sure to supply a valid file name in the conduit's configuration dialog. "
 "Aborting the conduit."
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:327
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:328
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
 msgid "Unable to initialize and load the addressbook for the sync."
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:340
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:341
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
 msgid "Unable to lock addressbook for writing.  Can't sync!"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:396
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
 msgid ""
 "An error occurred while uploading \"%1\". You can try to upload the "
 "temporary local file \"%2\" manually"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:518
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
 msgid "Unable to open the addressbook databases on the handheld."
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:539
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
 msgid "Unable to open the addressbook."
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1526
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
 msgid "Item on PC"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1527
-#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:308
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
 msgid "Handheld"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1528
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
 msgid "Last sync"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1549
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
 msgid "Last name"
 msgstr "ਆਖਰੀ ਨਾਂ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1550
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
 msgid "First name"
 msgstr "ਪਹਿਲਾਂ ਨਾਂ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1551
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
 msgid "Organization"
 msgstr "ਸੰਗਠਨ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1552
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
 msgid "Title"
 msgstr "ਸਿਰਲੇਖ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1553
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
 msgid "Note"
 msgstr "ਸੂਚਨਾ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1555
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
 msgid "Custom 1"
 msgstr "ਪਸੰਦ 1"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1556
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
 msgid "Custom 2"
 msgstr "ਪਸੰਦ 2"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1557
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
 msgid "Custom 3"
 msgstr "ਪਸੰਦ 3"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1558
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
 msgid "Custom 4"
 msgstr "ਪਸੰਦ 4"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1560
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
 msgid "Work Phone"
 msgstr "ਕੰਮ ਫੋਨ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1561
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
 msgid "Home Phone"
 msgstr "ਘਰ ਫੋਨ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1562
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
 msgid "Mobile Phone"
 msgstr "ਮੋਬਾਇਲ ਫੋਨ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1563
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
 msgid "Fax"
 msgstr "ਫੈਕਸ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1564
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
 msgid "Pager"
 msgstr "ਪੇਜ਼ਰ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1565
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
 msgid "Other"
 msgstr "ਹੋਰ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1566
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
 msgid "Email"
 msgstr "ਈ-ਪੱਤਰ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1569
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
 msgid "Address"
 msgstr "ਸਿਰਨਾਵਾਂ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1570
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
 msgid "City"
 msgstr "ਸ਼ਹਿਰ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1571
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
 msgid "Region"
 msgstr "ਖੇਤਰ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1572
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
 msgid "Postal code"
 msgstr "ਡਾਕਖਾਨਾ ਕੋਡ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1573
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
 msgid "Country"
 msgstr "ਦੇਸ਼"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1587 kpilot/listCat.cc:84
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
 msgid "Category"
 msgstr "ਵਰਗ"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1752
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
 msgid ""
 "The following address entry was changed, but does no longer exist on the "
 "handheld. Please resolve this conflict:"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1756
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
 msgid ""
 "The following address entry was changed, but does no longer exist on the PC. "
 "Please resolve this conflict:"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1760
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
 msgid ""
 "The following address entry was changed on the handheld as well as on the PC "
 "side. The changes could not be merged automatically, so please resolve the "
 "conflict yourself:"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1762
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
 msgid "Address conflict"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:48
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
 msgid "Abbrowser Conduit for KPilot"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:50
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
 msgid "Configures the Abbrowser Conduit for KPilot"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:56
-#: conduits/abbrowserconduit/abbrowser-setup.cc:59
-#: conduits/docconduit/doc-factory.cc:68 conduits/popmail/setupDialog.cc:74
-#: conduits/vcalconduit/todo-setup.cc:59 conduits/vcalconduit/todo-setup.cc:63
-#: conduits/vcalconduit/vcal-setup.cc:50 conduits/vcalconduit/vcal-setup.cc:54
-#: kpilot/kpilot.cc:1027 kpilot/pilotDaemon.cc:1323
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
+#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
+#: conduits/vcalconduit/todo-setup.cpp:59 conduits/vcalconduit/todo-setup.cpp:63
+#: conduits/vcalconduit/vcal-setup.cpp:50 conduits/vcalconduit/vcal-setup.cpp:54
+#: kpilot/kpilot.cpp:1027 kpilot/pilotDaemon.cpp:1323
 msgid "Maintainer"
 msgstr "ਪ੍ਰਬੰਧਕ"
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:61
-#: conduits/knotes/knotes-factory.cc:77
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
+#: conduits/knotes/knotes-factory.cpp:77
 msgid "UI"
 msgstr ""
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:162
+#: conduits/abbrowserconduit/resolutionDialog.cpp:162
 msgid ""
 "_: Entries in the resolution dialog. First the name of the field, then the "
 "entry from the Handheld or PC after the colon\n"
 "%1: %2"
 msgstr ""
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:164
+#: conduits/abbrowserconduit/resolutionDialog.cpp:164
 msgid ""
 "_: Denoting newlines in Address entries. No need to translate\n"
 " | "
 msgstr " | "
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:214
-#: conduits/abbrowserconduit/resolutionDialog.cc:220
+#: conduits/abbrowserconduit/resolutionDialog.cpp:214
+#: conduits/abbrowserconduit/resolutionDialog.cpp:220
 msgid "Delete entry"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:198
+#: conduits/docconduit/DOC-converter.cpp:198
 msgid "Unable to open text file %1 for reading."
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:383
+#: conduits/docconduit/DOC-converter.cpp:383
 msgid "Unable to open Database for writing"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:440
+#: conduits/docconduit/DOC-converter.cpp:440
 #, c-format
 msgid "Unable to open palm doc database %1"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:510
+#: conduits/docconduit/DOC-converter.cpp:510
 msgid "No filename set for the conversion"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:515
+#: conduits/docconduit/DOC-converter.cpp:515
 msgid "Unable to open Database for reading"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:523
+#: conduits/docconduit/DOC-converter.cpp:523
 #, c-format
 msgid "Unable to read database header for database %1."
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:543
+#: conduits/docconduit/DOC-converter.cpp:543
 #, c-format
 msgid "Unable to open output file %1."
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:558
+#: conduits/docconduit/DOC-converter.cpp:558
 msgid "Could not read text record #%1 from Database %2"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:577
+#: conduits/docconduit/DOC-converter.cpp:577
 msgid "Could not read bookmark record #%1 from Database %2"
 msgstr ""
 
-#: conduits/docconduit/DOC-converter.cc:594
+#: conduits/docconduit/DOC-converter.cpp:594
 msgid "Unable to open file %1 for the bookmarks of %2."
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:84
+#: conduits/docconduit/doc-conduit.cpp:84
 msgid "DOC"
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:272
+#: conduits/docconduit/doc-conduit.cpp:272
 msgid "Searching for texts and databases to synchronize"
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:332
+#: conduits/docconduit/doc-conduit.cpp:332
 msgid "Database created."
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:380
+#: conduits/docconduit/doc-conduit.cpp:380
 msgid "Unable to install the locally created PalmDOC %1 to the handheld."
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:383
+#: conduits/docconduit/doc-conduit.cpp:383
 msgid "Conversion of PalmDOC \"%1\" failed."
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:391
+#: conduits/docconduit/doc-conduit.cpp:391
 #, c-format
 msgid "Unable to open or create the database %1."
 msgstr ""
 
 #: conduits/abbrowserconduit/kaddressbookConduit.ui:147
-#: conduits/docconduit/doc-conduit.cc:625
+#: conduits/docconduit/doc-conduit.cpp:625
 #: conduits/docconduit/doc-setupdialog.ui:401
 #, no-c-format
 msgid "Conflict Resolution"
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:630
+#: conduits/docconduit/doc-conduit.cpp:630
 msgid "Sync aborted by user."
 msgstr ""
 
-#: conduits/docconduit/doc-conduit.cc:668
+#: conduits/docconduit/doc-conduit.cpp:668
 msgid "Synchronizing text \"%1\""
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:53
+#: conduits/docconduit/doc-conflictdialog.cpp:53
 msgid ""
 "Here is a list of all text files and DOC databases the conduit found. The "
 "conduit tried to determine the correct sync direction, but for databases in "
@@ -358,83 +358,83 @@ msgid ""
 "version is the current one."
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:57
+#: conduits/docconduit/doc-conflictdialog.cpp:57
 msgid ""
 "You can also change the sync direction for databases without a conflict."
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:61
+#: conduits/docconduit/doc-conflictdialog.cpp:61
 msgid "DOC Databases"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:106
+#: conduits/docconduit/doc-conflictdialog.cpp:106
 msgid "No Sync"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:107
+#: conduits/docconduit/doc-conflictdialog.cpp:107
 msgid "Sync Handheld to PC"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:108
+#: conduits/docconduit/doc-conflictdialog.cpp:108
 msgid "Sync PC to Handheld"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:109
+#: conduits/docconduit/doc-conflictdialog.cpp:109
 msgid "Delete Both Databases"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:113
+#: conduits/docconduit/doc-conflictdialog.cpp:113
 msgid "More Info..."
 msgstr "ਹੋਰ ਜਾਣਕਾਰੀ..."
 
-#: conduits/docconduit/doc-conflictdialog.cc:155
+#: conduits/docconduit/doc-conflictdialog.cpp:155
 msgid "unchanged"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:156
+#: conduits/docconduit/doc-conflictdialog.cpp:156
 msgid "new"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:157
+#: conduits/docconduit/doc-conflictdialog.cpp:157
 msgid "changed"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:158
+#: conduits/docconduit/doc-conflictdialog.cpp:158
 msgid "only bookmarks changed"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:159
+#: conduits/docconduit/doc-conflictdialog.cpp:159
 msgid "deleted"
 msgstr "ਹਟਾਇਆ"
 
-#: conduits/docconduit/doc-conflictdialog.cc:160
+#: conduits/docconduit/doc-conflictdialog.cpp:160
 msgid "does not exist"
 msgstr "ਮੌਜੂਦ ਨਾ ਹੋਵੇ"
 
-#: conduits/docconduit/doc-conflictdialog.cc:161
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:207
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:404
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:405
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:406
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:407
+#: conduits/docconduit/doc-conflictdialog.cpp:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
 msgid "unknown"
 msgstr "ਅਣਜਾਣ"
 
-#: conduits/docconduit/doc-conflictdialog.cc:171
+#: conduits/docconduit/doc-conflictdialog.cpp:171
 msgid ""
 "Status of the database %1:\n"
 "\n"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:172
+#: conduits/docconduit/doc-conflictdialog.cpp:172
 msgid "Handheld: %1\n"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:173
+#: conduits/docconduit/doc-conflictdialog.cpp:173
 msgid "Desktop: %1\n"
 msgstr ""
 
-#: conduits/docconduit/doc-conflictdialog.cc:175
+#: conduits/docconduit/doc-conflictdialog.cpp:175
 msgid "Database information"
 msgstr ""
 
@@ -442,15 +442,15 @@ msgstr ""
 msgid "Resolution Dialog"
 msgstr ""
 
-#: conduits/docconduit/doc-factory.cc:63
+#: conduits/docconduit/doc-factory.cpp:63
 msgid "Palm DOC Conduit for KPilot"
 msgstr ""
 
-#: conduits/docconduit/doc-factory.cc:64
+#: conduits/docconduit/doc-factory.cpp:64
 msgid "Configures the DOC Conduit for KPilot"
 msgstr ""
 
-#: conduits/docconduit/doc-setup.cc:64
+#: conduits/docconduit/doc-setup.cpp:64
 msgid "Palm DOC"
 msgstr ""
 
@@ -470,834 +470,834 @@ msgstr ""
 msgid "PalmDOC Converter"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:178
-#: conduits/docconduit/kpalmdoc_dlg.cc:214
-#: conduits/docconduit/kpalmdoc_dlg.cc:327
-#: conduits/docconduit/kpalmdoc_dlg.cc:352
+#: conduits/docconduit/kpalmdoc_dlg.cpp:178
+#: conduits/docconduit/kpalmdoc_dlg.cpp:214
+#: conduits/docconduit/kpalmdoc_dlg.cpp:327
+#: conduits/docconduit/kpalmdoc_dlg.cpp:352
 msgid ""
 "<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
 "<br>Use folder <em>%2</em> instead?</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:181
-#: conduits/docconduit/kpalmdoc_dlg.cc:217
-#: conduits/docconduit/kpalmdoc_dlg.cc:330
-#: conduits/docconduit/kpalmdoc_dlg.cc:356
+#: conduits/docconduit/kpalmdoc_dlg.cpp:181
+#: conduits/docconduit/kpalmdoc_dlg.cpp:217
+#: conduits/docconduit/kpalmdoc_dlg.cpp:330
+#: conduits/docconduit/kpalmdoc_dlg.cpp:356
 msgid "Use Folder"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:194
+#: conduits/docconduit/kpalmdoc_dlg.cpp:194
 msgid ""
 "<qt>The folder <em>%1</em> for the handheld database files is not a valid "
 "folder.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:203
+#: conduits/docconduit/kpalmdoc_dlg.cpp:203
 msgid ""
 "<qt>The folder <em>%1</em> for the handheld database files is not a valid "
 "directory.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:231
+#: conduits/docconduit/kpalmdoc_dlg.cpp:231
 msgid ""
 "<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:254
-#: conduits/docconduit/kpalmdoc_dlg.cc:392
+#: conduits/docconduit/kpalmdoc_dlg.cpp:254
+#: conduits/docconduit/kpalmdoc_dlg.cpp:392
 msgid "The following texts were successfully converted:"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:255
-#: conduits/docconduit/kpalmdoc_dlg.cc:393
+#: conduits/docconduit/kpalmdoc_dlg.cpp:255
+#: conduits/docconduit/kpalmdoc_dlg.cpp:393
 msgid "Conversion Successful"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:259
-#: conduits/docconduit/kpalmdoc_dlg.cc:397
+#: conduits/docconduit/kpalmdoc_dlg.cpp:259
+#: conduits/docconduit/kpalmdoc_dlg.cpp:397
 msgid "No text files were converted correctly"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:269
-#: conduits/docconduit/kpalmdoc_dlg.cc:407
+#: conduits/docconduit/kpalmdoc_dlg.cpp:269
+#: conduits/docconduit/kpalmdoc_dlg.cpp:407
 msgid "<qt>The file <em>%1</em> does not exist.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:285
-#: conduits/docconduit/kpalmdoc_dlg.cc:415
+#: conduits/docconduit/kpalmdoc_dlg.cpp:285
+#: conduits/docconduit/kpalmdoc_dlg.cpp:415
 msgid "Conversion of file %1 successful."
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:342
+#: conduits/docconduit/kpalmdoc_dlg.cpp:342
 msgid ""
 "<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:369
+#: conduits/docconduit/kpalmdoc_dlg.cpp:369
 msgid ""
 "<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:437
+#: conduits/docconduit/kpalmdoc_dlg.cpp:437
 msgid "&Text folder:"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:438
+#: conduits/docconduit/kpalmdoc_dlg.cpp:438
 msgid "&PalmDOC folder:"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:442
+#: conduits/docconduit/kpalmdoc_dlg.cpp:442
 #: conduits/docconduit/kpalmdoc_dlgbase.ui:66
 #, no-c-format
 msgid "&Text file:"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:443
+#: conduits/docconduit/kpalmdoc_dlg.cpp:443
 msgid "&DOC file:"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:458
+#: conduits/docconduit/kpalmdoc_dlg.cpp:458
 msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:459
-#: conduits/docconduit/kpalmdoc_dlg.cc:504 kpilot/addressWidget.cc:698
-#: kpilot/logWidget.cc:343
+#: conduits/docconduit/kpalmdoc_dlg.cpp:459
+#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
+#: kpilot/logWidget.cpp:343
 msgid "Overwrite"
 msgstr "ਉੱਪਰ ਲ਼ਿਖੋ"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:484
-#: conduits/docconduit/kpalmdoc_dlg.cc:520
+#: conduits/docconduit/kpalmdoc_dlg.cpp:484
+#: conduits/docconduit/kpalmdoc_dlg.cpp:520
 msgid "<qt>Error while converting the text %1.</qt>"
 msgstr ""
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:503
+#: conduits/docconduit/kpalmdoc_dlg.cpp:503
 msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:232
+#: conduits/knotes/knotes-action.cpp:232
 msgid "Could not open MemoDB on the handheld."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:272
+#: conduits/knotes/knotes-action.cpp:272
 #, c-format
 msgid "Could not load the resource at: %1"
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:808
+#: conduits/knotes/knotes-action.cpp:808
 #, c-format
 msgid ""
 "_n: Added one new memo.\n"
 "Added %n new memos."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:814
+#: conduits/knotes/knotes-action.cpp:814
 #, c-format
 msgid ""
 "_n: Modified one memo.\n"
 "Modified %n memos."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:821
+#: conduits/knotes/knotes-action.cpp:821
 #, c-format
 msgid ""
 "_n: Deleted one memo.\n"
 "Deleted %n memos."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:827
+#: conduits/knotes/knotes-action.cpp:827
 #, c-format
 msgid ""
 "_n: Added one note to KNotes.\n"
 "Added %n notes to KNotes."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:833
+#: conduits/knotes/knotes-action.cpp:833
 #, c-format
 msgid ""
 "_n: Modified one note in KNotes.\n"
 "Modified %n notes in KNotes."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:839
+#: conduits/knotes/knotes-action.cpp:839
 #, c-format
 msgid ""
 "_n: Deleted one note from KNotes.\n"
 "Deleted %n notes from KNotes."
 msgstr ""
 
-#: conduits/knotes/knotes-action.cc:844
+#: conduits/knotes/knotes-action.cpp:844
 msgid "No change to KNotes."
 msgstr ""
 
-#: conduits/knotes/knotes-factory.cc:67
+#: conduits/knotes/knotes-factory.cpp:67
 msgid "KNotes Conduit for KPilot"
 msgstr ""
 
-#: conduits/knotes/knotes-factory.cc:69
+#: conduits/knotes/knotes-factory.cpp:69
 msgid "Configures the KNotes Conduit for KPilot"
 msgstr ""
 
-#: conduits/knotes/knotes-setup.cc:59
+#: conduits/knotes/knotes-setup.cpp:59
 msgid "KNotes"
 msgstr "ਕੇ-ਸੂਚਨਾ"
 
-#: conduits/malconduit/mal-conduit.cc:121 conduits/malconduit/mal-setup.cc:62
+#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
 msgid "MAL"
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:193
+#: conduits/malconduit/mal-conduit.cpp:193
 msgid ""
 "Skipping MAL sync, because last synchronization was not long enough ago."
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:202
+#: conduits/malconduit/mal-conduit.cpp:202
 msgid "MAL synchronization failed (no SyncInfo)."
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:217
+#: conduits/malconduit/mal-conduit.cpp:217
 msgid "No proxy server is set."
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:220
+#: conduits/malconduit/mal-conduit.cpp:220
 #, c-format
 msgid "Using proxy server: %1"
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:259
+#: conduits/malconduit/mal-conduit.cpp:259
 msgid "No SOCKS proxy is set."
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:262
+#: conduits/malconduit/mal-conduit.cpp:262
 #, c-format
 msgid "Using SOCKS proxy: %1"
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:70
-#: conduits/memofileconduit/memofile-factory.cc:61
+#: conduits/memofileconduit/memofile-conduit.cpp:70
+#: conduits/memofileconduit/memofile-factory.cpp:61
 msgid "Memofile"
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:101
+#: conduits/memofileconduit/memofile-conduit.cpp:101
 msgid "Unable to open the memo databases on the handheld."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:109
+#: conduits/memofileconduit/memofile-conduit.cpp:109
 msgid "Cannot initialize from pilot."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:116
+#: conduits/memofileconduit/memofile-conduit.cpp:116
 msgid "Cannot initialize the memo files from disk."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:123
+#: conduits/memofileconduit/memofile-conduit.cpp:123
 #, c-format
 msgid " Syncing with %1."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:126
+#: conduits/memofileconduit/memofile-conduit.cpp:126
 msgid " Copying Pilot to PC..."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:131
+#: conduits/memofileconduit/memofile-conduit.cpp:131
 msgid " Copying PC to Pilot..."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:135
+#: conduits/memofileconduit/memofile-conduit.cpp:135
 msgid " Doing regular sync..."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-factory.cc:63
+#: conduits/memofileconduit/memofile-factory.cpp:63
 msgid "Memofile Conduit for KPilot"
 msgstr ""
 
-#: conduits/memofileconduit/memofile-factory.cc:65
+#: conduits/memofileconduit/memofile-factory.cpp:65
 msgid "Configures the Memofile Conduit for KPilot"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-conduit.cc:59
-#: conduits/notepadconduit/notepad-factory.cc:89
+#: conduits/notepadconduit/notepad-conduit.cpp:59
+#: conduits/notepadconduit/notepad-factory.cpp:89
 msgid "Notepad"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-conduit.cc:79
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:591
+#: conduits/notepadconduit/notepad-conduit.cpp:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
 #, c-format
 msgid "Unable to open %1"
 msgstr "%1 ਨੂੰ ਖੋਲਣ ਵਿੱਚ ਆਯੋਗ"
 
-#: conduits/notepadconduit/notepad-conduit.cc:105
+#: conduits/notepadconduit/notepad-conduit.cpp:105
 #, c-format
 msgid ""
 "_n: 1 notepad could not be saved\n"
 "%n notepads could not be saved"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-conduit.cc:106
+#: conduits/notepadconduit/notepad-conduit.cpp:106
 #, c-format
 msgid ""
 "_n: 1 notepad saved\n"
 "%n notepads saved"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-factory.cc:67
+#: conduits/notepadconduit/notepad-factory.cpp:67
 msgid "Saves notepads to png files"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-factory.cc:69
+#: conduits/notepadconduit/notepad-factory.cpp:69
 msgid "Configures the Notepad Conduit for KPilot"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-factory.cc:78
+#: conduits/notepadconduit/notepad-factory.cpp:78
 msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
 msgstr ""
 
-#: conduits/null/null-conduit.cc:63 conduits/null/null-factory.cc:63
+#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
 msgid "Null"
 msgstr ""
 
-#: conduits/null/null-conduit.cc:81
+#: conduits/null/null-conduit.cpp:81
 msgid "NULL conduit is programmed to fail."
 msgstr ""
 
-#: conduits/null/null-factory.cc:65
+#: conduits/null/null-factory.cpp:65
 msgid "Null Conduit for KPilot"
 msgstr ""
 
-#: conduits/null/null-factory.cc:67
+#: conduits/null/null-factory.cpp:67
 msgid "Configures the Null Conduit for KPilot"
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:89 conduits/popmail/setupDialog.cc:66
+#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
 msgid "KMail"
 msgstr "ਕੇਮੇਲ"
 
-#: conduits/popmail/popmail-conduit.cc:118
+#: conduits/popmail/popmail-conduit.cpp:118
 #, c-format
 msgid ""
 "_n: Sent one message\n"
 "Sent %n messages"
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:138
+#: conduits/popmail/popmail-conduit.cpp:138
 msgid "No mail was sent."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:145
+#: conduits/popmail/popmail-conduit.cpp:145
 msgid "No mail could be sent."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:195
+#: conduits/popmail/popmail-conduit.cpp:195
 msgid "Could not connect to DCOP server for the KMail connection."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:197
-#: conduits/popmail/popmail-conduit.cc:232
-#: conduits/popmail/popmail-conduit.cc:245
-#: conduits/popmail/popmail-conduit.cc:273
+#: conduits/popmail/popmail-conduit.cpp:197
+#: conduits/popmail/popmail-conduit.cpp:232
+#: conduits/popmail/popmail-conduit.cpp:245
+#: conduits/popmail/popmail-conduit.cpp:273
 msgid "Error Sending Mail"
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:230
-#: conduits/popmail/popmail-conduit.cc:243
+#: conduits/popmail/popmail-conduit.cpp:230
+#: conduits/popmail/popmail-conduit.cpp:243
 msgid "Cannot open temporary file to store mail from Pilot in."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:272
+#: conduits/popmail/popmail-conduit.cpp:272
 msgid "DCOP connection with KMail failed."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:397
+#: conduits/popmail/popmail-conduit.cpp:397
 msgid "Cannot perform backup of mail database"
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:405
+#: conduits/popmail/popmail-conduit.cpp:405
 msgid "Unable to open mail database on handheld"
 msgstr ""
 
-#: conduits/popmail/setupDialog.cc:68
+#: conduits/popmail/setupDialog.cpp:68
 msgid "Mail Conduit for KPilot"
 msgstr ""
 
-#: conduits/popmail/setupDialog.cc:70
+#: conduits/popmail/setupDialog.cpp:70
 msgid "Configures the Mail Conduit for KPilot"
 msgstr ""
 
-#: conduits/popmail/setupDialog.cc:78 conduits/vcalconduit/todo-setup.cc:53
-#: conduits/vcalconduit/todo-setup.cc:55 conduits/vcalconduit/todo-setup.cc:57
-#: conduits/vcalconduit/vcal-setup.cc:58 conduits/vcalconduit/vcal-setup.cc:60
-#: conduits/vcalconduit/vcal-setup.cc:62
+#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
+#: conduits/vcalconduit/todo-setup.cpp:55 conduits/vcalconduit/todo-setup.cpp:57
+#: conduits/vcalconduit/vcal-setup.cpp:58 conduits/vcalconduit/vcal-setup.cpp:60
+#: conduits/vcalconduit/vcal-setup.cpp:62
 msgid "Original Author"
 msgstr "ਅਸਲੀ ਲੇਖਕ"
 
-#: conduits/popmail/setupDialog.cc:80
+#: conduits/popmail/setupDialog.cpp:80
 msgid "POP3 code"
 msgstr ""
 
-#: conduits/popmail/setupDialog.cc:82
+#: conduits/popmail/setupDialog.cpp:82
 msgid "SMTP support and redesign"
 msgstr ""
 
-#: conduits/recordconduit/factory.cc:64
+#: conduits/recordconduit/factory.cpp:64
 #, fuzzy
 msgid "Record Conduit"
 msgstr "ਰਿਕਾਰਡ ID"
 
-#: conduits/recordconduit/factory.cc:66
+#: conduits/recordconduit/factory.cpp:66
 msgid "Record Conduit for KPilot"
 msgstr ""
 
-#: conduits/recordconduit/factory.cc:68
+#: conduits/recordconduit/factory.cpp:68
 msgid "Configures the Record Conduit for KPilot"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:163
-#: conduits/sysinfoconduit/sysinfo-setup.cc:112
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
 msgid "System Information"
 msgstr "ਸਿਸਟਮ ਜਾਣਕਾਰੀ"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:254
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
 msgid "Password set"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:258
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
 msgid "No password set"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:308
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
 msgid "No Cards available via pilot-link"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:463
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
 msgid "No debug data"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:587
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
 msgid "Unable to open output file, using %1 instead."
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:602
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
 #, c-format
 msgid "Handheld system information written to the file %1"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:52
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
 msgid "HardwareInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:53
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
 msgid "UserInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:54
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
 msgid "MemoryInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:55
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
 msgid "StorageInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:56
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
 msgid "DatabaseList"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:57
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
 msgid "RecordNumbers"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:58
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
 msgid "SyncInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:59
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
 msgid "KDEVersion"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:60
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
 msgid "PalmOSVersion"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:61
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
 msgid "DebugInformation"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:95
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
 msgid "KPilot System Information conduit"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:97
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
 msgid ""
 "Retrieves System, Hardware, and User Info from the Handheld and stores them "
 "to a file."
 msgstr ""
 
-#: conduits/timeconduit/time-conduit.cc:57
-#: conduits/timeconduit/time-setup.cc:68 kpilot/datebookWidget.cc:68
+#: conduits/timeconduit/time-conduit.cpp:57
+#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
 msgid "Time"
 msgstr "ਸਮਾਂ"
 
-#: conduits/timeconduit/time-conduit.cc:91
+#: conduits/timeconduit/time-conduit.cpp:91
 msgid "Setting the clock on the handheld"
 msgstr ""
 
-#: conduits/timeconduit/time-conduit.cc:108
+#: conduits/timeconduit/time-conduit.cpp:108
 msgid ""
 "PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
 "time conduit..."
 msgstr ""
 
-#: conduits/timeconduit/time-setup.cc:48
+#: conduits/timeconduit/time-setup.cpp:48
 msgid "Time Synchronization Conduit for KPilot"
 msgstr ""
 
-#: conduits/timeconduit/time-setup.cc:50
+#: conduits/timeconduit/time-setup.cpp:50
 msgid "Synchronizes the Time on the Handheld and the PC"
 msgstr ""
 
-#: conduits/vcalconduit/cleanupstate.cc:62
+#: conduits/vcalconduit/cleanupstate.cpp:62
 msgid "Cleaning up ..."
 msgstr ""
 
-#: conduits/vcalconduit/cleanupstate.cc:91
+#: conduits/vcalconduit/cleanupstate.cpp:91
 msgid ""
 "An error occurred while uploading \"%1\". You can try to upload the "
 "temporary local file \"%2\" manually."
 msgstr ""
 
-#: conduits/vcalconduit/initstate.cc:59
+#: conduits/vcalconduit/initstate.cpp:59
 msgid "Initializing conduit ..."
 msgstr ""
 
-#: conduits/vcalconduit/pctohhstate.cc:71
+#: conduits/vcalconduit/pctohhstate.cpp:71
 msgid "Copying records to Pilot ..."
 msgstr ""
 
-#: conduits/vcalconduit/todo-conduit.cc:183
-#: conduits/vcalconduit/todo-setup.cc:45
+#: conduits/vcalconduit/todo-conduit.cpp:183
+#: conduits/vcalconduit/todo-setup.cpp:45
 msgid "To-do"
 msgstr ""
 
-#: conduits/vcalconduit/todo-setup.cc:47
+#: conduits/vcalconduit/todo-setup.cpp:47
 msgid "To-do Conduit for KPilot"
 msgstr ""
 
-#: conduits/vcalconduit/todo-setup.cc:49
+#: conduits/vcalconduit/todo-setup.cpp:49
 msgid "Configures the To-do Conduit for KPilot"
 msgstr ""
 
-#: conduits/vcalconduit/todo-setup.cc:69
+#: conduits/vcalconduit/todo-setup.cpp:69
 msgid "To-do Destination"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduit.cc:178
-#: conduits/vcalconduit/vcal-setup.cc:70
+#: conduits/vcalconduit/vcal-conduit.cpp:178
+#: conduits/vcalconduit/vcal-setup.cpp:70
 msgid "Calendar"
 msgstr "ਕੈਲੰਡਰ"
 
-#: conduits/vcalconduit/vcal-conduit.cc:222
+#: conduits/vcalconduit/vcal-conduit.cpp:222
 msgid ""
 "Event \"%1\" has a yearly recurrence other than by month, will change this "
 "to recurrence by month on handheld."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:183
+#: conduits/vcalconduit/vcal-conduitbase.cpp:183
 msgid "Could not open the calendar databases."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:269
+#: conduits/vcalconduit/vcal-conduitbase.cpp:269
 msgid ""
 "You selected to sync with an iCalendar file, but did not give a filename. "
 "Please select a valid file name in the conduit's configuration dialog"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:291
-#: conduits/vcalconduit/vcal-conduitbase.cc:356
+#: conduits/vcalconduit/vcal-conduitbase.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:356
 #, c-format
 msgid "Using local time zone: %1"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:292
-#: conduits/vcalconduit/vcal-conduitbase.cc:357
+#: conduits/vcalconduit/vcal-conduitbase.cpp:292
+#: conduits/vcalconduit/vcal-conduitbase.cpp:357
 #, c-format
 msgid "Using non-local time zone: %1"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:321
+#: conduits/vcalconduit/vcal-conduitbase.cpp:321
 msgid ""
 "You chose to sync with the file \"%1\", which cannot be opened or created. "
 "Please make sure to supply a valid file name in the conduit's configuration "
 "dialog. Aborting the conduit."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:330
+#: conduits/vcalconduit/vcal-conduitbase.cpp:330
 msgid "Syncing with file \"%1\""
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:354
+#: conduits/vcalconduit/vcal-conduitbase.cpp:354
 msgid "Syncing with standard calendar resource."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:367
+#: conduits/vcalconduit/vcal-conduitbase.cpp:367
 msgid ""
 "Unable to initialize the calendar object. Please check the conduit's setup"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:425
+#: conduits/vcalconduit/vcal-conduitbase.cpp:425
 msgid ""
 "The following item was modified both on the Handheld and on your PC:\n"
 "PC entry:\n"
 "\t"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:428
+#: conduits/vcalconduit/vcal-conduitbase.cpp:428
 msgid ""
 "\n"
 "Handheld entry:\n"
 "\t"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:430
+#: conduits/vcalconduit/vcal-conduitbase.cpp:430
 msgid ""
 "\n"
 "\n"
 "Which entry do you want to keep? It will overwrite the other entry."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:435
+#: conduits/vcalconduit/vcal-conduitbase.cpp:435
 msgid "Conflicting Entries"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:309
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
 msgid "PC"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:44
+#: conduits/vcalconduit/vcal-setup.cpp:44
 msgid "VCal Conduit for KPilot"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:46
+#: conduits/vcalconduit/vcal-setup.cpp:46
 msgid "Configures the VCal Conduit for KPilot"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:64
+#: conduits/vcalconduit/vcal-setup.cpp:64
 msgid "iCalendar port"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:66 kpilot/kpilot.cc:1038
-#: kpilot/kpilot.cc:1039
+#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
+#: kpilot/kpilot.cpp:1039
 msgid "Bugfixer"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:69
+#: conduits/vcalconduit/vcal-setup.cpp:69
 msgid "Calendar Destination"
 msgstr ""
 
-#: kpilot/addressEditor.cc:59
+#: kpilot/addressEditor.cpp:59
 msgid "Address Editor"
 msgstr ""
 
-#: kpilot/addressEditor.cc:107
+#: kpilot/addressEditor.cpp:107
 msgid "Phone"
 msgstr "ਫੋਨ"
 
-#: kpilot/addressEditor.cc:180
+#: kpilot/addressEditor.cpp:180
 msgid "Last name:"
 msgstr "ਆਖਰੀ ਨਾਂ:"
 
-#: kpilot/addressEditor.cc:181
+#: kpilot/addressEditor.cpp:181
 msgid "First name:"
 msgstr "ਪਹਿਲਾ ਨਾਂ:"
 
-#: kpilot/addressEditor.cc:182
+#: kpilot/addressEditor.cpp:182
 msgid "Title:"
 msgstr "ਸਿਰਲੇਖ:"
 
-#: kpilot/addressEditor.cc:183
+#: kpilot/addressEditor.cpp:183
 msgid "Company:"
 msgstr "ਕੰਪਨੀ:"
 
-#: kpilot/addressEditor.cc:192
+#: kpilot/addressEditor.cpp:192
 msgid "Address:"
 msgstr "ਸਿਰਨਾਵਾਂ:"
 
-#: kpilot/addressEditor.cc:193
+#: kpilot/addressEditor.cpp:193
 msgid "City:"
 msgstr "ਸ਼ਹਿਰ: "
 
-#: kpilot/addressEditor.cc:194
+#: kpilot/addressEditor.cpp:194
 msgid "State:"
 msgstr "ਰਾਜ:"
 
-#: kpilot/addressEditor.cc:195
+#: kpilot/addressEditor.cpp:195
 msgid "Zip code:"
 msgstr ""
 
-#: kpilot/addressEditor.cc:196
+#: kpilot/addressEditor.cpp:196
 msgid "Country:"
 msgstr "ਦੇਸ਼:"
 
-#: kpilot/addressEditor.cc:197
+#: kpilot/addressEditor.cpp:197
 msgid "Custom 1:"
 msgstr ""
 
-#: kpilot/addressEditor.cc:198
+#: kpilot/addressEditor.cpp:198
 msgid "Custom 2:"
 msgstr ""
 
-#: kpilot/addressEditor.cc:199
+#: kpilot/addressEditor.cpp:199
 msgid "Custom 3:"
 msgstr ""
 
-#: kpilot/addressEditor.cc:200
+#: kpilot/addressEditor.cpp:200
 msgid "Custom 4:"
 msgstr ""
 
-#: kpilot/addressWidget.cc:187
+#: kpilot/addressWidget.cpp:187
 msgid "There are still %1 address editing windows open."
 msgstr ""
 
-#: kpilot/addressWidget.cc:191
+#: kpilot/addressWidget.cpp:191
 #, c-format
 msgid ""
 "_n: There is still an address editing window open.\n"
 "There are still %n address editing windows open."
 msgstr ""
 
-#: kpilot/addressWidget.cc:224
+#: kpilot/addressWidget.cpp:224
 msgid "<qt>Select the category of addresses to display here.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:226 kpilot/memoWidget.cc:238
-#: kpilot/todoWidget.cc:220
+#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
+#: kpilot/todoWidget.cpp:220
 msgid "Category:"
 msgstr "ਵਰਗ:"
 
-#: kpilot/addressWidget.cc:237
+#: kpilot/addressWidget.cpp:237
 msgid ""
 "<qt>This list displays all the addresses in the selected category. Click on "
 "one to display it to the right.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:241
+#: kpilot/addressWidget.cpp:241
 msgid "Address info:"
 msgstr ""
 
-#: kpilot/addressWidget.cc:251 kpilot/todoWidget.cc:257
+#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
 msgid "Edit Record..."
 msgstr "ਰਿਕਾਰਡ ਸੋਧ..."
 
-#: kpilot/addressWidget.cc:255
+#: kpilot/addressWidget.cpp:255
 msgid "<qt>You can edit an address when it is selected.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:256 kpilot/todoWidget.cc:263
+#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
 msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:259 kpilot/todoWidget.cc:266
+#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
 msgid "New Record..."
 msgstr "ਨਵਾਂ ਰਿਕਾਰਡ..."
 
-#: kpilot/addressWidget.cc:263
+#: kpilot/addressWidget.cpp:263
 msgid "<qt>Add a new address to the address book.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:264
+#: kpilot/addressWidget.cpp:264
 msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:269 kpilot/todoWidget.cc:275
+#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
 msgid "Delete Record"
 msgstr "ਰਿਕਾਰਡ ਹਟਾਓ"
 
-#: kpilot/addressWidget.cc:274
+#: kpilot/addressWidget.cpp:274
 msgid "<qt>Delete the selected address from the address book.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:275 kpilot/memoWidget.cc:285
-#: kpilot/todoWidget.cc:281
+#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
+#: kpilot/todoWidget.cpp:281
 msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:277
+#: kpilot/addressWidget.cpp:277
 msgid ""
 "_: Export addresses to file\n"
 "Export..."
 msgstr ""
 
-#: kpilot/addressWidget.cc:281
+#: kpilot/addressWidget.cpp:281
 msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:393 lib/pilotMemo.cc:132
+#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
 msgid "[unknown]"
 msgstr "[ਅਣਜਾਣ]"
 
-#: kpilot/addressWidget.cc:435 kpilot/todoWidget.cc:363
+#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
 msgid "Cannot edit new records until HotSynced with Pilot."
 msgstr ""
 
-#: kpilot/addressWidget.cc:437 kpilot/addressWidget.cc:574
-#: kpilot/todoWidget.cc:365 kpilot/todoWidget.cc:498
+#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
+#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
 msgid "HotSync Required"
 msgstr ""
 
-#: kpilot/addressWidget.cc:480
+#: kpilot/addressWidget.cpp:480
 msgid ""
 "You cannot add addresses to the address book until you have done a HotSync "
 "at least once to retrieve the database layout from your Pilot."
 msgstr ""
 
-#: kpilot/addressWidget.cc:483
+#: kpilot/addressWidget.cpp:483
 msgid "Cannot Add New Address"
 msgstr ""
 
-#: kpilot/addressWidget.cc:572 kpilot/todoWidget.cc:496
+#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
 msgid "New records cannot be deleted until HotSynced with pilot."
 msgstr ""
 
-#: kpilot/addressWidget.cc:579 kpilot/todoWidget.cc:503
+#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
 msgid "Delete currently selected record?"
 msgstr ""
 
-#: kpilot/addressWidget.cc:580 kpilot/todoWidget.cc:504
+#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
 msgid "Delete Record?"
 msgstr "ਕੀ ਰਿਕਾਰਡ ਹਟਾਉਣਾ ਹੈ?"
 
-#: kpilot/addressWidget.cc:677
+#: kpilot/addressWidget.cpp:677
 msgid "Export All Addresses"
 msgstr ""
 
-#: kpilot/addressWidget.cc:678
+#: kpilot/addressWidget.cpp:678
 #, c-format
 msgid "Export Address Category %1"
 msgstr ""
 
-#: kpilot/addressWidget.cc:696
+#: kpilot/addressWidget.cpp:696
 msgid "The file <i>%1</i> exists. Overwrite?"
 msgstr ""
 
-#: kpilot/addressWidget.cc:697
+#: kpilot/addressWidget.cpp:697
 msgid "Overwrite File?"
 msgstr "ਫਾਇਲ ਉੱਪਰ ਲਿਖੋ?"
 
-#: kpilot/addressWidget.cc:710
+#: kpilot/addressWidget.cpp:710
 msgid "The file <i>%1</i> could not be opened for writing."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:252
+#: kpilot/conduitConfigDialog.cpp:252
 msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:260
+#: kpilot/conduitConfigDialog.cpp:260
 msgid "<qt>This is an old-style conduit.</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:264
+#: kpilot/conduitConfigDialog.cpp:264
 msgid "Configure..."
 msgstr "ਸੰਰਚਨਾ..."
 
-#: kpilot/conduitConfigDialog.cc:274
+#: kpilot/conduitConfigDialog.cpp:274
 msgid ""
 "<qt><i>Conduits</i> are external (possibly third-party) programs that "
 "perform synchronization actions. They may have individual configurations. "
@@ -1305,7 +1305,7 @@ msgid ""
 "</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:282
+#: kpilot/conduitConfigDialog.cpp:282
 msgid ""
 "<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
 "your hardware and the way KPilot should display your data. For the basic "
@@ -1317,143 +1317,143 @@ msgid ""
 "Select a conduit to configure it.</p></qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:295
+#: kpilot/conduitConfigDialog.cpp:295
 msgid "Configuration Wizard"
 msgstr "ਸੰਰਚਨਾ ਸਹਾਇਕ"
 
-#: kpilot/conduitConfigDialog.cc:369
+#: kpilot/conduitConfigDialog.cpp:369
 msgid "About KPilot. Credits."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:372
+#: kpilot/conduitConfigDialog.cpp:372
 msgid "Conduits"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:374
+#: kpilot/conduitConfigDialog.cpp:374
 msgid "General Setup"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:382
+#: kpilot/conduitConfigDialog.cpp:382
 msgid "General setup of KPilot (User name, port, general sync settings)"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:384
+#: kpilot/conduitConfigDialog.cpp:384
 msgid "Actions for HotSync with individual configuration."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:395 kpilot/kpilotConfigDialog.cc:470
+#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
 msgid "Startup and Exit"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:395
+#: kpilot/conduitConfigDialog.cpp:395
 msgid "Behavior at startup and exit."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:396 kpilot/kpilotConfigDialog.cc:418
+#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
 #: kpilot/kpilotConfigDialog_viewers.ui:33
 #, no-c-format
 msgid "Viewers"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:396
+#: kpilot/conduitConfigDialog.cpp:396
 msgid "Viewer settings."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:397 kpilot/kpilotConfigDialog.cc:328
-#: lib/syncAction.cc:208
+#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
+#: lib/syncAction.cpp:208
 msgid "Backup"
 msgstr "ਪਿੱਛੇ"
 
-#: kpilot/conduitConfigDialog.cc:397
+#: kpilot/conduitConfigDialog.cpp:397
 msgid "Special settings for backup."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:398 kpilot/kpilot.cc:261 kpilot/kpilot.cc:263
-#: kpilot/kpilot.cc:515 kpilot/kpilotConfigDialog.cc:242 lib/syncAction.cc:204
+#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261 kpilot/kpilot.cpp:263
+#: kpilot/kpilot.cpp:515 kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
 msgid "HotSync"
 msgstr "HotSync"
 
-#: kpilot/conduitConfigDialog.cc:398
+#: kpilot/conduitConfigDialog.cpp:398
 msgid "Special behavior during HotSync."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:399 kpilot/kpilotConfigDialog.cc:102
+#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
 msgid "Device"
 msgstr "ਜੰਤਰ"
 
-#: kpilot/conduitConfigDialog.cc:399
+#: kpilot/conduitConfigDialog.cpp:399
 msgid "Hardware settings and startup and exit options."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:542
+#: kpilot/conduitConfigDialog.cpp:542
 msgid ""
 "<qt>This is an internal action which has no configuration options. The "
 "action's description is: <i>%1</i> </qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:722
+#: kpilot/conduitConfigDialog.cpp:722
 msgid "KPilot Setup"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:735
+#: kpilot/conduitConfigDialog.cpp:735
 msgid ""
 "<qt>No library could be found for the conduit %1. This means that the "
 "conduit was not installed properly.</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:745 kpilot/conduitConfigDialog.cc:762
+#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
 msgid "Conduit Error"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:752
+#: kpilot/conduitConfigDialog.cpp:752
 msgid ""
 "<qt>There was a problem loading the library for the conduit %1. This means "
 "that the conduit was not installed properly.</qt>"
 msgstr ""
 
-#: kpilot/datebookWidget.cc:58 kpilot/dbviewerWidget.cc:109
+#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
 msgid "&Add..."
 msgstr "ਸ਼ਾਮਿਲ(&A)..."
 
-#: kpilot/datebookWidget.cc:61 kpilot/dbviewerWidget.cc:111
+#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
 msgid "&Edit..."
 msgstr "ਸੋਧ(&E)..."
 
-#: kpilot/datebookWidget.cc:64
+#: kpilot/datebookWidget.cpp:64
 msgid "&Delete..."
 msgstr "ਹਟਾਓ(&D)..."
 
-#: kpilot/datebookWidget.cc:69
+#: kpilot/datebookWidget.cpp:69
 msgid "Al"
 msgstr ""
 
-#: kpilot/datebookWidget.cc:70
+#: kpilot/datebookWidget.cpp:70
 msgid "Rec"
 msgstr ""
 
-#: kpilot/datebookWidget.cc:71 kpilot/listCat.cc:85
+#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
 msgid "Description"
 msgstr "ਵੇਰਵਾ"
 
-#: kpilot/dbAppInfoEditor.cc:46
+#: kpilot/dbAppInfoEditor.cpp:46
 msgid "Edit AppInfo Block"
 msgstr ""
 
-#: kpilot/dbAppInfoEditor.cc:68
+#: kpilot/dbAppInfoEditor.cpp:68
 msgid ""
 "To view the Application info block data, please install a hex editor (e.g. "
 "khexedit from tdeutils)."
 msgstr ""
 
-#: kpilot/dbAppInfoEditor.cc:86
+#: kpilot/dbAppInfoEditor.cpp:86
 msgid "Changing the AppInfo block isn't yet supported by KPilot!"
 msgstr ""
 
-#: kpilot/dbFlagsEditor.cc:45
+#: kpilot/dbFlagsEditor.cpp:45
 msgid "Edit Database Flags"
 msgstr ""
 
-#: kpilot/dbFlagsEditor.cc:60
+#: kpilot/dbFlagsEditor.cpp:60
 msgid ""
 "Changing the database flags might corrupt the whole database, or make the "
 "data unusable. Do not change the values unless you are absolutely sure you "
@@ -1462,19 +1462,19 @@ msgid ""
 "Really assign these new flags?"
 msgstr ""
 
-#: kpilot/dbFlagsEditor.cc:60
+#: kpilot/dbFlagsEditor.cpp:60
 msgid "Changing Database Flags"
 msgstr ""
 
-#: kpilot/dbFlagsEditor.cc:60 kpilot/dbRecordEditor.cc:75
+#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
 msgid "Assign"
 msgstr "ਜਾਰੀ"
 
-#: kpilot/dbRecordEditor.cc:53
+#: kpilot/dbRecordEditor.cpp:53
 msgid "Edit Record"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:75
+#: kpilot/dbRecordEditor.cpp:75
 msgid ""
 "Changing the record data and flags might corrupt the whole record, or even "
 "make the database unusable. Do not change the values unless you are "
@@ -1483,342 +1483,342 @@ msgid ""
 "Really assign these new flags?"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:75
+#: kpilot/dbRecordEditor.cpp:75
 msgid "Changing Record"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:106 kpilot/dbRecordEditor_base.ui:24
+#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
 #, no-c-format
 msgid "Record index:"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:107 kpilot/dbRecordEditor_base.ui:32
+#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
 #, no-c-format
 msgid "Record ID:"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:108 kpilot/dbRecordEditor.cc:109
+#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
 #: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
 #: kpilot/todoEditor_base.ui:99
 #, no-c-format
 msgid "1"
 msgstr "1"
 
-#: kpilot/dbRecordEditor.cc:110 kpilot/dbRecordEditor_base.ui:70
+#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
 #, no-c-format
 msgid "Flags"
 msgstr "ਨਿਸ਼ਾਨ"
 
-#: kpilot/dbRecordEditor.cc:111 kpilot/dbRecordEditor_base.ui:81
+#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
 #, no-c-format
 msgid "&Dirty"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:112
+#: kpilot/dbRecordEditor.cpp:112
 msgid "De&leted"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:113
+#: kpilot/dbRecordEditor.cpp:113
 msgid "&Busy"
 msgstr "ਰੁਝਿਆ(&B)"
 
-#: kpilot/dbRecordEditor.cc:114 kpilot/dbRecordEditor_base.ui:105
+#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
 #, no-c-format
 msgid "&Secret"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:115 kpilot/dbRecordEditor_base.ui:113
+#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
 #, no-c-format
 msgid "&Archived"
 msgstr ""
 
-#: kpilot/dbRecordEditor.cc:193
+#: kpilot/dbRecordEditor.cpp:193
 msgid ""
 "To view and edit the record data, please install a hex editor (e.g. "
 "kbytesedit from tdeutils)."
 msgstr ""
 
-#: kpilot/dbSelectionDialog.cc:108
+#: kpilot/dbSelectionDialog.cpp:108
 msgid ""
 "This is a database that exists on the device. It was not added manually, so "
 "it can not removed from the list."
 msgstr ""
 
-#: kpilot/dbSelectionDialog.cc:108
+#: kpilot/dbSelectionDialog.cpp:108
 msgid "Database on Device"
 msgstr ""
 
-#: kpilot/dbSelectionDialog.cc:119
+#: kpilot/dbSelectionDialog.cpp:119
 msgid "You need to select a database to delete in the list."
 msgstr ""
 
-#: kpilot/dbSelectionDialog.cc:119
+#: kpilot/dbSelectionDialog.cpp:119
 msgid "No Database Selected"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:84
+#: kpilot/dbviewerWidget.cpp:84
 msgid "All Databases"
 msgstr "ਸਭ ਡਾਟਾਬੇਸ"
 
-#: kpilot/dbviewerWidget.cc:85
+#: kpilot/dbviewerWidget.cpp:85
 msgid "Only Applications (*.prc)"
 msgstr "ਸਿਰਫ਼ ਕਾਰਜ (*.prc)"
 
-#: kpilot/dbviewerWidget.cc:86
+#: kpilot/dbviewerWidget.cpp:86
 msgid "Only Databases (*.pdb)"
 msgstr "ਸਿਰਫ਼ ਡਾਟਾਬੇਸ (*.pdb)"
 
-#: kpilot/dbviewerWidget.cc:93
+#: kpilot/dbviewerWidget.cpp:93
 msgid "General Database &Information"
 msgstr "ਸਧਾਰਨ ਡਾਟਾਬੇਸ ਜਾਣਕਾਰੀ(&I)"
 
-#: kpilot/dbviewerWidget.cc:95
+#: kpilot/dbviewerWidget.cpp:95
 msgid "&Application Info Block (Categories etc.)"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:101
+#: kpilot/dbviewerWidget.cpp:101
 msgid "Rec. Nr."
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:102
+#: kpilot/dbviewerWidget.cpp:102
 msgid "Length"
 msgstr "ਲੰਬਾਈ"
 
-#: kpilot/dbviewerWidget.cc:103
+#: kpilot/dbviewerWidget.cpp:103
 msgid "Record ID"
 msgstr "ਰਿਕਾਰਡ ID"
 
-#: kpilot/dbviewerWidget.cc:189
+#: kpilot/dbviewerWidget.cpp:189
 #, c-format
 msgid "<B>Warning:</B> Cannot read database file %1."
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:194
+#: kpilot/dbviewerWidget.cpp:194
 msgid "<B>Database:</B> %1, %2 records<BR>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:203
+#: kpilot/dbviewerWidget.cpp:203
 msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:246 kpilot/dbviewerWidget.cc:253
+#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
 #, c-format
 msgid "<B>Warning:</B> Cannot read application file %1."
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:260
+#: kpilot/dbviewerWidget.cpp:260
 msgid "<B>Application:</B> %1<BR><BR>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:267
+#: kpilot/dbviewerWidget.cpp:267
 msgid "Created: %1<BR>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:270
+#: kpilot/dbviewerWidget.cpp:270
 msgid "Modified: %1<BR>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:273
+#: kpilot/dbviewerWidget.cpp:273
 msgid "Backed up: %1<BR>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:353
+#: kpilot/dbviewerWidget.cpp:353
 msgid "You must select a record for editing."
 msgstr "ਤੁਹਾਨੂੰ ਸੋਧਣ ਲਈ ਇੱਕ ਰਿਕਾਰਡ ਦੀ ਚੋਣ ਕਰਨੀ ਪਵੇਗੀ।"
 
-#: kpilot/dbviewerWidget.cc:353
+#: kpilot/dbviewerWidget.cpp:353
 msgid "No Record Selected"
 msgstr "ਕੋਈ ਰਿਕਾਰਡ ਨਹੀਂ ਚੁਣਿਆ ਗਿਆ"
 
-#: kpilot/dbviewerWidget.cc:366
+#: kpilot/dbviewerWidget.cpp:366
 msgid ""
 "<qt>Do you really want to delete the selected record? This cannot be undone."
 "<br><br>Delete record?<qt>"
 msgstr ""
 
-#: kpilot/dbviewerWidget.cc:366
+#: kpilot/dbviewerWidget.cpp:366
 msgid "Deleting Record"
 msgstr "ਰਿਕਾਰਡ ਹਟਾਓ"
 
-#: kpilot/fileInstallWidget.cc:71
+#: kpilot/fileInstallWidget.cpp:71
 msgid "Files to install:"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:77
+#: kpilot/fileInstallWidget.cpp:77
 msgid "Add File..."
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:81
+#: kpilot/fileInstallWidget.cpp:81
 msgid "<qt>Choose a file to add to the list of files to install.</qt>"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:83
+#: kpilot/fileInstallWidget.cpp:83
 msgid "Clear List"
 msgstr "ਸੂਚੀ ਸਾਫ਼"
 
-#: kpilot/fileInstallWidget.cc:87
+#: kpilot/fileInstallWidget.cpp:87
 msgid ""
 "<qt>Clear the list of files to install. No files will be installed.</qt>"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:95
+#: kpilot/fileInstallWidget.cpp:95
 msgid ""
 "<qt>This lists files that will be installed on the Pilot during the next "
 "HotSync. Drag files here or use the Add button.</qt>"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:217
+#: kpilot/fileInstallWidget.cpp:217
 msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:291
+#: kpilot/fileInstallWidget.cpp:291
 msgid ""
 "_: Delete a single file item\n"
 "Delete"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:294
+#: kpilot/fileInstallWidget.cpp:294
 msgid "Delete selected files"
 msgstr ""
 
-#: kpilot/fileInstaller.cc:109
+#: kpilot/fileInstaller.cpp:109
 #, c-format
 msgid "Cannot install %1"
 msgstr ""
 
-#: kpilot/fileInstaller.cc:110
+#: kpilot/fileInstaller.cpp:110
 msgid ""
 "Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
 "file installer."
 msgstr ""
 
-#: kpilot/hotSync.cc:339
+#: kpilot/hotSync.cpp:339
 #, c-format
 msgid "Backup directory: %1."
 msgstr ""
 
-#: kpilot/hotSync.cc:353
+#: kpilot/hotSync.cpp:353
 msgid "Full backup started."
 msgstr ""
 
-#: kpilot/hotSync.cc:358
+#: kpilot/hotSync.cpp:358
 msgid "Fast backup started"
 msgstr ""
 
-#: kpilot/hotSync.cc:387
+#: kpilot/hotSync.cpp:387
 msgid "Exiting on cancel."
 msgstr ""
 
-#: kpilot/hotSync.cc:399
+#: kpilot/hotSync.cpp:399
 msgid "Full backup complete."
 msgstr ""
 
-#: kpilot/hotSync.cc:403
+#: kpilot/hotSync.cpp:403
 msgid "Fast backup complete."
 msgstr ""
 
-#: kpilot/hotSync.cc:419
+#: kpilot/hotSync.cpp:419
 #, c-format
 msgid "Backing up: %1"
 msgstr "ਬੈਕਅੱਪ ਜਾਰੀ: %1"
 
-#: kpilot/hotSync.cc:447
+#: kpilot/hotSync.cpp:447
 #, c-format
 msgid "Skipping %1"
 msgstr ""
 
-#: kpilot/hotSync.cc:482
+#: kpilot/hotSync.cpp:482
 msgid "Backup of %1 failed.\n"
 msgstr ""
 
-#: kpilot/hotSync.cc:540
+#: kpilot/hotSync.cpp:540
 msgid "... OK.\n"
 msgstr ""
 
-#: kpilot/hotSync.cc:548
+#: kpilot/hotSync.cpp:548
 #, fuzzy
 msgid "Backup failed."
 msgstr "ਪਿੱਛੇ"
 
-#: kpilot/hotSync.cc:607
+#: kpilot/hotSync.cpp:607
 msgid "[File Installer]"
 msgstr ""
 
-#: kpilot/hotSync.cc:612
+#: kpilot/hotSync.cpp:612
 msgid "No Files to install"
 msgstr ""
 
-#: kpilot/hotSync.cc:624
+#: kpilot/hotSync.cpp:624
 #, c-format
 msgid ""
 "_n: Installing one file\n"
 "Installing %n Files"
 msgstr ""
 
-#: kpilot/hotSync.cc:649
+#: kpilot/hotSync.cpp:649
 msgid "Done Installing Files"
 msgstr ""
 
-#: kpilot/hotSync.cc:663
+#: kpilot/hotSync.cpp:663
 #, c-format
 msgid "Installing %1"
 msgstr ""
 
-#: kpilot/hotSync.cc:686
+#: kpilot/hotSync.cpp:686
 msgid "Cannot install file &quot;%1&quot;."
 msgstr ""
 
-#: kpilot/hotSync.cc:713 kpilot/hotSync.cc:723
+#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
 msgid "Unable to open file &quot;%1&quot;."
 msgstr ""
 
-#: kpilot/hotSync.cc:732
+#: kpilot/hotSync.cpp:732
 msgid "Unable to read file &quot;%1&quot;."
 msgstr ""
 
-#: kpilot/hotSync.cc:748
+#: kpilot/hotSync.cpp:748
 msgid ""
 "The database in &quot;%1&quot; has a resource name that is longer than 31 "
 "characters. This suggests a bug in the tool used to create the database. "
 "KPilot cannot install this database."
 msgstr ""
 
-#: kpilot/hotSync.cc:806
+#: kpilot/hotSync.cpp:806
 msgid ""
 "_: A common name\n"
 "John Doe"
 msgstr ""
 
-#: kpilot/hotSync.cc:808
+#: kpilot/hotSync.cpp:808
 msgid ""
 "<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
 "be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
 msgstr ""
 
-#: kpilot/hotSync.cc:814 kpilot/hotSync.cc:831 kpilot/hotSync.cc:855
+#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
 msgid "User Unknown"
 msgstr ""
 
-#: kpilot/hotSync.cc:826
+#: kpilot/hotSync.cpp:826
 msgid ""
 "<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
 "KPilot use this username in future?</qt>"
 msgstr ""
 
-#: kpilot/hotSync.cc:844
+#: kpilot/hotSync.cpp:844
 msgid ""
 "KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
 "KPilot's username be set in the handheld as well?"
 msgstr ""
 
-#: kpilot/hotSync.cc:848
+#: kpilot/hotSync.cpp:848
 msgid ""
 "<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
 "should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
 "stop this sync.)"
 msgstr ""
 
-#: kpilot/hotSync.cc:877
+#: kpilot/hotSync.cpp:877
 msgid ""
 "<qt>The handheld thinks that the username is %1; however, KPilot says you "
 "are %2.Which of these is the correct name?\n"
@@ -1826,595 +1826,595 @@ msgid ""
 "changed.</qt>"
 msgstr ""
 
-#: kpilot/hotSync.cc:887
+#: kpilot/hotSync.cpp:887
 msgid "User Mismatch"
 msgstr ""
 
-#: kpilot/hotSync.cc:890
+#: kpilot/hotSync.cpp:890
 msgid "Use KPilot Name"
 msgstr ""
 
-#: kpilot/hotSync.cc:891
+#: kpilot/hotSync.cpp:891
 msgid "Use Handheld Name"
 msgstr ""
 
-#: kpilot/hotSync.cc:997
+#: kpilot/hotSync.cpp:997
 msgid "Restore directory does not exist."
 msgstr ""
 
-#: kpilot/hotSync.cc:998 kpilot/hotSync.cc:1013
+#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
 msgid "Restore not performed."
 msgstr ""
 
-#: kpilot/hotSync.cc:1003
+#: kpilot/hotSync.cpp:1003
 msgid ""
 "<qt>Are you sure you want to completely restore your Pilot from the backup "
 "directory (<i>%1</i>)? This will erase any information you currently have on "
 "your Pilot.</qt>"
 msgstr ""
 
-#: kpilot/hotSync.cc:1008
+#: kpilot/hotSync.cpp:1008
 msgid "Restore Pilot"
 msgstr ""
 
-#: kpilot/hotSync.cc:1010
+#: kpilot/hotSync.cpp:1010
 msgid "Restore <i>not</i> performed."
 msgstr ""
 
-#: kpilot/hotSync.cc:1012
+#: kpilot/hotSync.cpp:1012
 msgid "Canceled by user."
 msgstr ""
 
-#: kpilot/hotSync.cc:1024 kpilot/hotSync.cc:1094
+#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
 msgid "Restoring %1..."
 msgstr ""
 
-#: kpilot/hotSync.cc:1044
+#: kpilot/hotSync.cpp:1044
 msgid "File '%1' cannot be read."
 msgstr ""
 
-#: kpilot/hotSync.cc:1071
+#: kpilot/hotSync.cpp:1071
 msgid "OK."
 msgstr ""
 
-#: kpilot/hotSync.cc:1085
+#: kpilot/hotSync.cpp:1085
 msgid "Restore incomplete."
 msgstr ""
 
-#: kpilot/hotSync.cc:1100
+#: kpilot/hotSync.cpp:1100
 msgid "Cannot restore file `%1'."
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:62
+#: kpilot/internalEditorAction.cpp:62
 msgid "[Internal Editors]"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:76
+#: kpilot/internalEditorAction.cpp:76
 #, c-format
 msgid "Databases with changed records: %1"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:101
+#: kpilot/internalEditorAction.cpp:101
 msgid "Unable to open the serial or local database for %1. Skipping it."
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:156
+#: kpilot/internalEditorAction.cpp:156
 msgid "record"
 msgstr "ਰਿਕਾਰਡ"
 
-#: kpilot/internalEditorAction.cc:166
+#: kpilot/internalEditorAction.cpp:166
 msgid "address"
 msgstr "ਸਿਰਨਾਵਾਂ"
 
-#: kpilot/internalEditorAction.cc:177
+#: kpilot/internalEditorAction.cpp:177
 msgid "to-do entry"
 msgstr "ਕਰਨ ਲਈ ਇੰਦਰਾਜ਼"
 
-#: kpilot/internalEditorAction.cc:186
+#: kpilot/internalEditorAction.cpp:186
 msgid "memo"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:197
+#: kpilot/internalEditorAction.cpp:197
 msgid "calendar entry"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:204
+#: kpilot/internalEditorAction.cpp:204
 msgid ""
 "The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
 "the internal editor. Shall the changes in KPilot be copied to the handheld, "
 "and so override the changes there?"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:209
+#: kpilot/internalEditorAction.cpp:209
 #, c-format
 msgid "Conflict in database  %1"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:211
+#: kpilot/internalEditorAction.cpp:211
 msgid "Use KPilot"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:211
+#: kpilot/internalEditorAction.cpp:211
 msgid "Use Handheld"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:212
+#: kpilot/internalEditorAction.cpp:212
 msgid "Use &KPilot"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:213
+#: kpilot/internalEditorAction.cpp:213
 msgid "Use &Handheld"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:228 kpilot/internalEditorAction.cc:244
+#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
 msgid "Entry in KPilot"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:235 kpilot/internalEditorAction.cc:272
+#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
 msgid "Entry on Handheld"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:263 kpilot/internalEditorAction.cc:291
+#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
 msgid ""
 "To view and edit the record data, please install a hex editor (e.g. khexedit "
 "from tdeutils)."
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:315
+#: kpilot/internalEditorAction.cpp:315
 #, c-format
 msgid "Databases with changed flags: %1"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:333
+#: kpilot/internalEditorAction.cpp:333
 msgid "Setting the database flags on the handheld is not yet supported."
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:356
+#: kpilot/internalEditorAction.cpp:356
 #, c-format
 msgid "Databases with changed AppBlock: %1"
 msgstr ""
 
-#: kpilot/kpilot.cc:162
+#: kpilot/kpilot.cpp:162
 msgid "Starting the KPilot daemon ..."
 msgstr ""
 
-#: kpilot/kpilot.cc:179
+#: kpilot/kpilot.cpp:179
 msgid ""
 "Could not start the KPilot daemon. The system error message was: &quot;"
 "%1&quot;"
 msgstr ""
 
-#: kpilot/kpilot.cc:196
+#: kpilot/kpilot.cpp:196
 msgid "Daemon status is `%1'"
 msgstr ""
 
-#: kpilot/kpilot.cc:197
+#: kpilot/kpilot.cpp:197
 msgid "not running"
 msgstr ""
 
-#: kpilot/kpilot.cc:214
+#: kpilot/kpilot.cpp:214
 msgid "Using character set %1 on the handheld."
 msgstr ""
 
-#: kpilot/kpilot.cc:266 kpilot/kpilot.cc:268
+#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
 msgid "To-do Viewer"
 msgstr ""
 
-#: kpilot/kpilot.cc:270 kpilot/kpilot.cc:272
+#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
 #: kpilot/kpilotConfigDialog_viewers.ui:74
 #, no-c-format
 msgid "Address Viewer"
 msgstr ""
 
-#: kpilot/kpilot.cc:274 kpilot/kpilot.cc:276
+#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
 msgid "Memo Viewer"
 msgstr ""
 
-#: kpilot/kpilot.cc:278 kpilot/kpilot.cc:281 kpilot/pilotDaemon.cc:736
+#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
 msgid "File Installer"
 msgstr ""
 
-#: kpilot/kpilot.cc:283 kpilot/kpilot.cc:285
+#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
 msgid "Generic DB Viewer"
 msgstr ""
 
-#: kpilot/kpilot.cc:360
+#: kpilot/kpilot.cpp:360
 msgid "Next sync will be a backup. "
 msgstr ""
 
-#: kpilot/kpilot.cc:361 kpilot/kpilot.cc:369 kpilot/kpilot.cc:377
-#: kpilot/kpilot.cc:385 kpilot/kpilot.cc:393 kpilot/kpilot.cc:401
-#: kpilot/pilotDaemon.cc:671
+#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
+#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
+#: kpilot/pilotDaemon.cpp:671
 msgid "Please press the HotSync button."
 msgstr ""
 
-#: kpilot/kpilot.cc:368
+#: kpilot/kpilot.cpp:368
 msgid "Next sync will restore the Pilot from backup. "
 msgstr ""
 
-#: kpilot/kpilot.cc:376
+#: kpilot/kpilot.cpp:376
 msgid "Next sync will be a regular HotSync. "
 msgstr ""
 
-#: kpilot/kpilot.cc:384
+#: kpilot/kpilot.cpp:384
 msgid "Next sync will be a Full Sync. "
 msgstr ""
 
-#: kpilot/kpilot.cc:392
+#: kpilot/kpilot.cpp:392
 msgid "Next sync will copy Handheld data to PC. "
 msgstr ""
 
-#: kpilot/kpilot.cc:400
+#: kpilot/kpilot.cpp:400
 msgid "Next sync will copy PC data to Handheld. "
 msgstr ""
 
-#: kpilot/kpilot.cc:428
+#: kpilot/kpilot.cpp:428
 msgid "The daemon has exited."
 msgstr ""
 
-#: kpilot/kpilot.cc:429
+#: kpilot/kpilot.cpp:429
 msgid "No further HotSyncs are possible."
 msgstr ""
 
-#: kpilot/kpilot.cc:430
+#: kpilot/kpilot.cpp:430
 msgid "Restart the daemon to HotSync again."
 msgstr ""
 
-#: kpilot/kpilot.cc:450
+#: kpilot/kpilot.cpp:450
 #, c-format
 msgid "Cannot start a Sync now. %1"
 msgstr ""
 
-#: kpilot/kpilot.cc:463
+#: kpilot/kpilot.cpp:463
 msgid "Cannot start Sync"
 msgstr ""
 
-#: kpilot/kpilot.cc:517
+#: kpilot/kpilot.cpp:517
 msgid "Select the kind of HotSync to perform next."
 msgstr ""
 
-#: kpilot/kpilot.cc:518
+#: kpilot/kpilot.cpp:518
 msgid ""
 "Select the kind of HotSync to perform next. This applies only to the next "
 "HotSync; to change the default, use the configuration dialog."
 msgstr ""
 
-#: kpilot/kpilot.cc:525
+#: kpilot/kpilot.cpp:525
 msgid "&HotSync"
 msgstr ""
 
-#: kpilot/kpilot.cc:528
+#: kpilot/kpilot.cpp:528
 msgid "Next HotSync will be normal HotSync."
 msgstr ""
 
-#: kpilot/kpilot.cc:529
+#: kpilot/kpilot.cpp:529
 msgid "Tell the daemon that the next HotSync should be a normal HotSync."
 msgstr ""
 
-#: kpilot/kpilot.cc:533
+#: kpilot/kpilot.cpp:533
 msgid "Full&Sync"
 msgstr ""
 
-#: kpilot/kpilot.cc:536
+#: kpilot/kpilot.cpp:536
 msgid "Next HotSync will be a FullSync."
 msgstr ""
 
-#: kpilot/kpilot.cc:537
+#: kpilot/kpilot.cpp:537
 msgid ""
 "Tell the daemon that the next HotSync should be a FullSync (check data on "
 "both sides)."
 msgstr ""
 
-#: kpilot/kpilot.cc:541
+#: kpilot/kpilot.cpp:541
 msgid "&Backup"
 msgstr ""
 
-#: kpilot/kpilot.cc:544 kpilot/kpilot.cc:560
+#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
 msgid "Next HotSync will be backup."
 msgstr ""
 
-#: kpilot/kpilot.cc:545
+#: kpilot/kpilot.cpp:545
 msgid ""
 "Tell the daemon that the next HotSync should back up the Handheld to the PC."
 msgstr ""
 
-#: kpilot/kpilot.cc:549
+#: kpilot/kpilot.cpp:549
 msgid "&Restore"
 msgstr "ਮੁੜ-ਪ੍ਰਾਪਤ(&R)"
 
-#: kpilot/kpilot.cc:552
+#: kpilot/kpilot.cpp:552
 msgid "Next HotSync will be restore."
 msgstr ""
 
-#: kpilot/kpilot.cc:553
+#: kpilot/kpilot.cpp:553
 msgid ""
 "Tell the daemon that the next HotSync should restore the Handheld from data "
 "on the PC."
 msgstr ""
 
-#: kpilot/kpilot.cc:557 kpilot/kpilotConfigDialog_sync.ui:59
-#: lib/syncAction.cc:207
+#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
+#: lib/syncAction.cpp:207
 #, no-c-format
 msgid "Copy Handheld to PC"
 msgstr ""
 
-#: kpilot/kpilot.cc:561
+#: kpilot/kpilot.cpp:561
 msgid ""
 "Tell the daemon that the next HotSync should copy all data from the Handheld "
 "to the PC, overwriting entries on the PC."
 msgstr ""
 
-#: kpilot/kpilot.cc:566 kpilot/kpilotConfigDialog_sync.ui:54
-#: lib/syncAction.cc:206
+#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
+#: lib/syncAction.cpp:206
 #, no-c-format
 msgid "Copy PC to Handheld"
 msgstr ""
 
-#: kpilot/kpilot.cc:569
+#: kpilot/kpilot.cpp:569
 msgid "Next HotSync will copy PC to Handheld."
 msgstr ""
 
-#: kpilot/kpilot.cc:570
+#: kpilot/kpilot.cpp:570
 msgid ""
 "Tell the daemon that the next HotSync should copy all data from the PC to "
 "the Handheld, overwriting entries on the Handheld."
 msgstr ""
 
-#: kpilot/kpilot.cc:577
+#: kpilot/kpilot.cpp:577
 msgid "&List Only"
 msgstr ""
 
-#: kpilot/kpilot.cc:580
+#: kpilot/kpilot.cpp:580
 msgid "Next HotSync will list databases."
 msgstr ""
 
-#: kpilot/kpilot.cc:581
+#: kpilot/kpilot.cpp:581
 msgid ""
 "Tell the daemon that the next HotSync should just list the files on the "
 "Handheld and do nothing else."
 msgstr ""
 
-#: kpilot/kpilot.cc:588
+#: kpilot/kpilot.cpp:588
 msgid "Rese&t Link"
 msgstr ""
 
-#: kpilot/kpilot.cc:591
+#: kpilot/kpilot.cpp:591
 msgid "Reset the device connection."
 msgstr ""
 
-#: kpilot/kpilot.cc:592
+#: kpilot/kpilot.cpp:592
 msgid "Try to reset the daemon and its connection to the Handheld."
 msgstr ""
 
-#: kpilot/kpilot.cc:597
+#: kpilot/kpilot.cpp:597
 msgid "Quit KPilot, (and stop the daemon if configured that way)."
 msgstr ""
 
-#: kpilot/kpilot.cc:613
+#: kpilot/kpilot.cpp:613
 msgid "Configuration &Wizard..."
 msgstr ""
 
-#: kpilot/kpilot.cc:616
+#: kpilot/kpilot.cpp:616
 msgid "Configure KPilot using the configuration wizard."
 msgstr ""
 
-#: kpilot/kpilot.cc:851
+#: kpilot/kpilot.cpp:851
 msgid ""
 "The library containing the configuration wizard for KPilot could not be "
 "loaded, and the wizard is not available. Please try to use the regular "
 "configuration dialog."
 msgstr ""
 
-#: kpilot/kpilot.cc:854
+#: kpilot/kpilot.cpp:854
 msgid "Wizard Not Available"
 msgstr ""
 
-#: kpilot/kpilot.cc:898
+#: kpilot/kpilot.cpp:898
 msgid "Changed username to `%1'."
 msgstr ""
 
-#: kpilot/kpilot.cc:927
+#: kpilot/kpilot.cpp:927
 msgid ""
 "Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
 "busy)."
 msgstr ""
 
-#: kpilot/kpilot.cc:951
+#: kpilot/kpilot.cpp:951
 msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
 msgstr ""
 
-#: kpilot/kpilot.cc:991
+#: kpilot/kpilot.cpp:991
 msgid "Setup the Pilot device, conduits and other parameters"
 msgstr ""
 
-#: kpilot/kpilot.cc:993 kpilot/pilotDaemon.cc:1296
+#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
 msgid "Set debugging level"
 msgstr ""
 
-#: kpilot/kpilot.cc:1015
+#: kpilot/kpilot.cpp:1015
 msgid "KPilot"
 msgstr ""
 
-#: kpilot/kpilot.cc:1024 kpilot/pilotDaemon.cc:1320
+#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
 msgid "Project Leader"
 msgstr "ਪ੍ਰੋਜੈਕਟ ਮੁੱਖੀ"
 
-#: kpilot/kpilot.cc:1030 kpilot/kpilot.cc:1032
+#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
 msgid "Core and conduits developer"
 msgstr ""
 
-#: kpilot/kpilot.cc:1034
+#: kpilot/kpilot.cpp:1034
 msgid "VCal conduit"
 msgstr ""
 
-#: kpilot/kpilot.cc:1035
+#: kpilot/kpilot.cpp:1035
 msgid "Abbrowser conduit"
 msgstr ""
 
-#: kpilot/kpilot.cc:1036
+#: kpilot/kpilot.cpp:1036
 msgid "Expenses conduit"
 msgstr ""
 
-#: kpilot/kpilot.cc:1037
+#: kpilot/kpilot.cpp:1037
 msgid "Notepad conduit, Bugfixer"
 msgstr ""
 
-#: kpilot/kpilot.cc:1041
+#: kpilot/kpilot.cpp:1041
 msgid "XML GUI"
 msgstr ""
 
-#: kpilot/kpilot.cc:1044
+#: kpilot/kpilot.cpp:1044
 msgid ".ui files"
 msgstr ""
 
-#: kpilot/kpilot.cc:1046
+#: kpilot/kpilot.cpp:1046
 msgid "Bugfixer, coolness"
 msgstr ""
 
-#: kpilot/kpilot.cc:1048
+#: kpilot/kpilot.cpp:1048
 msgid "VCalconduit state machine, CMake"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:163
+#: kpilot/kpilotConfig.cpp:163
 msgid "The configuration file is outdated."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:165
+#: kpilot/kpilotConfig.cpp:165
 msgid "The configuration file has version %1, while KPilot needs version %2."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:170
+#: kpilot/kpilotConfig.cpp:170
 msgid ""
 "Please run KPilot and check the configuration carefully to update the file."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:174
+#: kpilot/kpilotConfig.cpp:174
 msgid "Important changes to watch for are:"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:178
+#: kpilot/kpilotConfig.cpp:178
 msgid ""
 "Renamed conduits, Kroupware and file installer have been made conduits as "
 "well."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:181
+#: kpilot/kpilotConfig.cpp:181
 msgid "Conflict resolution is now a global setting."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:186
+#: kpilot/kpilotConfig.cpp:186
 msgid "Changed format of no-backup databases."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:199
+#: kpilot/kpilotConfig.cpp:199
 msgid ""
 "The configuration file for KPilot is out-of date. Please run KPilot to "
 "update it."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:202 kpilot/kpilotConfig.cc:327
+#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
 msgid "Configuration File Out-of Date"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:220
+#: kpilot/kpilotConfig.cpp:220
 msgid ""
 "The settings for the file installer have been moved to the conduits "
 "configuration. Check the installed conduits list."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:223
+#: kpilot/kpilotConfig.cpp:223
 msgid "Settings Updated"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:248
+#: kpilot/kpilotConfig.cpp:248
 msgid ""
 "<qt>The following old conduits were found on your system. It is a good idea "
 "to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:253
+#: kpilot/kpilotConfig.cpp:253
 msgid "Old Conduits Found"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:285
+#: kpilot/kpilotConfig.cpp:285
 msgid ""
 "<qt>The no backup databases listed in your configuration file have been "
 "adjusted to the new format. Database creator IDs have been changed to use "
 "square brackets []."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:289
+#: kpilot/kpilotConfig.cpp:289
 msgid "No Backup Databases Updated"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:310
+#: kpilot/kpilotConfig.cpp:310
 msgid ""
 "KPilot is not configured for use. You may use the configuration wizard or "
 "the normal configure dialog to configure KPilot."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:313
+#: kpilot/kpilotConfig.cpp:313
 msgid "Not Configured"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:314
+#: kpilot/kpilotConfig.cpp:314
 msgid "Use &Wizard"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:315
+#: kpilot/kpilotConfig.cpp:315
 msgid "Use &Dialog"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:323
+#: kpilot/kpilotConfig.cpp:323
 msgid ""
 "The configuration file for KPilot is out-of date. KPilot can update some "
 "parts of the configuration automatically. Do you wish to continue?"
 msgstr ""
 
-#: kpilot/kpilotConfigDialog.cc:68
+#: kpilot/kpilotConfigDialog.cpp:68
 msgid ""
 "<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
 "want to save the changes before continuing?</qt>"
 msgstr ""
 
-#: kpilot/kpilotConfigDialog.cc:145
+#: kpilot/kpilotConfigDialog.cpp:145
 msgid ""
 "<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
 "This is probably unsupported and can cause problems. Are you sure you want "
 "to use this device name?</qt>"
 msgstr ""
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 msgid "Device Name too Long"
 msgstr ""
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 msgid "Use"
 msgstr "ਵਰਤੋਂ"
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 msgid "Do Not Use"
 msgstr "ਨਾ ਵਰਤੋਂ"
 
-#: kpilot/kpilotConfigWizard.cc:62
+#: kpilot/kpilotConfigWizard.cpp:62
 msgid "Pilot Info"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:64
+#: kpilot/kpilotConfigWizard.cpp:64
 msgid "Application to Sync With"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:127
+#: kpilot/kpilotConfigWizard.cpp:127
 msgid "general TDE-PIM"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:133
+#: kpilot/kpilotConfigWizard.cpp:133
 msgid ""
 "_: Gnome's PIM suite\n"
 "Evolution"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:157
+#: kpilot/kpilotConfigWizard.cpp:157
 msgid ""
 "KPilot cannot yet synchronize the addressbook with Evolution, so the "
 "addressbook conduit was disabled.\n"
@@ -2422,38 +2422,38 @@ msgid ""
 "before the sync, otherwise you will lose data."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:157
+#: kpilot/kpilotConfigWizard.cpp:157
 msgid "Restrictions with Evolution"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:162
+#: kpilot/kpilotConfigWizard.cpp:162
 msgid ""
 "_: Kpilot will sync with nothing\n"
 "nothing (it will backup only)"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:166
+#: kpilot/kpilotConfigWizard.cpp:166
 msgid ""
 "_: TDE's PIM suite\n"
 "Kontact"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:200
+#: kpilot/kpilotConfigWizard.cpp:200
 #, c-format
 msgid "KPilot is now configured to sync with %1."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:205
+#: kpilot/kpilotConfigWizard.cpp:205
 msgid ""
 "The remaining options in the config dialog are advanced options and can be "
 "used to fine-tune KPilot."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:210
+#: kpilot/kpilotConfigWizard.cpp:210
 msgid "Automatic Configuration Finished"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:217
+#: kpilot/kpilotConfigWizard.cpp:217
 msgid ""
 "Please put the handheld in the cradle, press the hotsync button and click on "
 "\"Continue\".\n"
@@ -2464,61 +2464,61 @@ msgid ""
 "might be advisable not to continue."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:223
+#: kpilot/kpilotConfigWizard.cpp:223
 msgid "Handheld Detection"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:90
+#: kpilot/kpilotProbeDialog.cpp:90
 msgid "Autodetecting Your Handheld"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:90
+#: kpilot/kpilotProbeDialog.cpp:90
 msgid "Restart Detection"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:97
+#: kpilot/kpilotProbeDialog.cpp:97
 msgid ""
 "KPilot is now trying to automatically detect the device of your handheld. "
 "Please press the hotsync button if you have not done so already."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:100
+#: kpilot/kpilotProbeDialog.cpp:100
 msgid "Status"
 msgstr "ਸਥਿਤੀ"
 
-#: kpilot/kpilotProbeDialog.cc:104
+#: kpilot/kpilotProbeDialog.cpp:104
 msgid "Autodetection not yet started..."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:113
+#: kpilot/kpilotProbeDialog.cpp:113
 msgid "Detected Values"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:119
+#: kpilot/kpilotProbeDialog.cpp:119
 msgid "Handheld user:"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:123
+#: kpilot/kpilotProbeDialog.cpp:123
 msgid "Device:"
 msgstr "ਜੰਤਰ:"
 
-#: kpilot/kpilotProbeDialog.cc:126 kpilot/kpilotProbeDialog.cc:129
+#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
 msgid "[Not yet known]"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:195
+#: kpilot/kpilotProbeDialog.cpp:195
 msgid "Starting detection..."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:233
+#: kpilot/kpilotProbeDialog.cpp:233
 msgid "Waiting for handheld to connect..."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:266
+#: kpilot/kpilotProbeDialog.cpp:266
 msgid "Timeout reached, could not detect a handheld."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:267
+#: kpilot/kpilotProbeDialog.cpp:267
 msgid ""
 "<qt>A handheld could not be detected. Possible check the following things:</"
 "p><ul><li> Have you pressed the hotsync button on the handheld?\n"
@@ -2529,181 +2529,181 @@ msgid ""
 "</ul>"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:273
+#: kpilot/kpilotProbeDialog.cpp:273
 msgid "Automatic Detection Failed"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:288
+#: kpilot/kpilotProbeDialog.cpp:288
 #, c-format
 msgid "Found a connected device on %1"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:338
+#: kpilot/kpilotProbeDialog.cpp:338
 msgid "Disconnected from all devices"
 msgstr ""
 
-#: kpilot/kroupware.cc:126
+#: kpilot/kroupware.cpp:126
 msgid "Syncing to-dos with KMail"
 msgstr ""
 
-#: kpilot/kroupware.cc:135
+#: kpilot/kroupware.cpp:135
 msgid "Syncing calendar with KMail"
 msgstr ""
 
-#: kpilot/kroupware.cc:177
+#: kpilot/kroupware.cpp:177
 msgid "Syncing Notes with Mail"
 msgstr ""
 
-#: kpilot/kroupware.cc:188
+#: kpilot/kroupware.cpp:188
 msgid "Rewriting to-dos to KMail..."
 msgstr ""
 
-#: kpilot/kroupware.cc:195
+#: kpilot/kroupware.cpp:195
 msgid "Rewriting Calendar to KMail"
 msgstr ""
 
-#: kpilot/kroupware.cc:230
+#: kpilot/kroupware.cpp:230
 msgid "Syncing KMail with Addresses "
 msgstr ""
 
-#: kpilot/kroupware.cc:259
+#: kpilot/kroupware.cpp:259
 msgid "Syncing KMail with Notes"
 msgstr ""
 
-#: kpilot/logFile.cc:97 lib/actions.cc:134
+#: kpilot/logFile.cpp:97 lib/actions.cpp:134
 msgid "HotSync finished."
 msgstr ""
 
-#: kpilot/logWidget.cc:90
+#: kpilot/logWidget.cpp:90
 msgid ""
 "<qt>This lists all the messages received during the current HotSync</qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:119
+#: kpilot/logWidget.cpp:119
 msgid "<qt><b>HotSync Log</b></qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:134
+#: kpilot/logWidget.cpp:134
 msgid ""
 "_: Clear the text of HotSync messages\n"
 "Clear Log"
 msgstr ""
 
-#: kpilot/logWidget.cc:136
+#: kpilot/logWidget.cpp:136
 msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:140
+#: kpilot/logWidget.cpp:140
 msgid "Save Log..."
 msgstr "ਲਾਗ ਸੰਭਾਲੋ..."
 
-#: kpilot/logWidget.cc:141
+#: kpilot/logWidget.cpp:141
 msgid ""
 "<qt>You can save the list of messages received during this HotSync to a file "
 "(for example for use in a bug report) by clicking here.</qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:150
+#: kpilot/logWidget.cpp:150
 msgid "Sync progress:"
 msgstr ""
 
-#: kpilot/logWidget.cc:153
+#: kpilot/logWidget.cpp:153
 msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:270
+#: kpilot/logWidget.cpp:270
 msgid "<b>HotSync Finished.</b>"
 msgstr ""
 
-#: kpilot/logWidget.cc:334
+#: kpilot/logWidget.cpp:334
 msgid "Save Log"
 msgstr ""
 
-#: kpilot/logWidget.cc:341
+#: kpilot/logWidget.cpp:341
 msgid "The file exists. Do you want to overwrite it?"
 msgstr ""
 
-#: kpilot/logWidget.cc:343
+#: kpilot/logWidget.cpp:343
 msgid "File Exists"
 msgstr "ਫਾਇਲ ਮੌਜੂਦ ਹੈ"
 
-#: kpilot/logWidget.cc:343
+#: kpilot/logWidget.cpp:343
 msgid "Do Not Overwrite"
 msgstr "ਉੱਤੇ ਨਾ ਲਿਖੋ"
 
-#: kpilot/logWidget.cc:367
+#: kpilot/logWidget.cpp:367
 msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
 msgstr ""
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 msgid "Cannot Save"
 msgstr ""
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 msgid "Try Again"
 msgstr "ਮੁੜ-ਕੋਸ਼ਿਸ਼"
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 msgid "Do Not Try"
 msgstr "ਕੋਸ਼ਿਸ਼ ਨਾ ਕਰੋ"
 
-#: kpilot/main-test.cc:66
+#: kpilot/main-test.cpp:66
 msgid "Path to Pilot device node"
 msgstr ""
 
-#: kpilot/main-test.cc:69
+#: kpilot/main-test.cpp:69
 msgid "List DBs"
 msgstr ""
 
-#: kpilot/main-test.cc:71
+#: kpilot/main-test.cpp:71
 msgid "Backup Pilot to <dest dir>"
 msgstr ""
 
-#: kpilot/main-test.cc:73
+#: kpilot/main-test.cpp:73
 msgid "Restore Pilot from backup"
 msgstr ""
 
-#: kpilot/main-test.cc:76
+#: kpilot/main-test.cpp:76
 msgid "Run conduit from desktop file <filename>"
 msgstr ""
 
-#: kpilot/main-test.cc:80
+#: kpilot/main-test.cpp:80
 msgid "Run a specific check (with the device)"
 msgstr ""
 
-#: kpilot/main-test.cc:83
+#: kpilot/main-test.cpp:83
 msgid "Show KPilot configuration information"
 msgstr ""
 
-#: kpilot/main-test.cc:86
+#: kpilot/main-test.cpp:86
 msgid "Set the debug level"
 msgstr ""
 
-#: kpilot/main-test.cc:94
+#: kpilot/main-test.cpp:94
 msgid "*Really* run the conduit, not in test mode."
 msgstr ""
 
-#: kpilot/main-test.cc:98
+#: kpilot/main-test.cpp:98
 msgid "Run the conduit in file-test mode."
 msgstr ""
 
-#: kpilot/main-test.cc:101
+#: kpilot/main-test.cpp:101
 msgid "Copy Pilot to Desktop."
 msgstr ""
 
-#: kpilot/main-test.cc:104
+#: kpilot/main-test.cpp:104
 msgid "Copy Desktop to Pilot."
 msgstr ""
 
-#: kpilot/main-test.cc:107
+#: kpilot/main-test.cpp:107
 msgid "Repeated perform action - only useful for --list"
 msgstr ""
 
-#: kpilot/main-test.cc:347
+#: kpilot/main-test.cpp:347
 msgid "KPilotTest"
 msgstr ""
 
-#: kpilot/main-test.cc:352
+#: kpilot/main-test.cpp:352
 msgid "KPilot Maintainer"
 msgstr ""
 
@@ -2716,128 +2716,128 @@ msgstr ""
 #: conduits/recordconduit/setup_base.ui:68
 #: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
 #: conduits/timeconduit/time-setup_dialog.ui:35
-#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cc:357
+#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
 #, no-c-format
 msgid "General"
 msgstr "ਸਧਾਰਨ"
 
-#: kpilot/main-test.cc:359
+#: kpilot/main-test.cpp:359
 msgid "Conduit Actions"
 msgstr ""
 
-#: kpilot/memoWidget.cc:234
+#: kpilot/memoWidget.cpp:234
 msgid ""
 "Select the category of addresses\n"
 "to display here."
 msgstr ""
 
-#: kpilot/memoWidget.cc:237
+#: kpilot/memoWidget.cpp:237
 msgid "Memos:"
 msgstr ""
 
-#: kpilot/memoWidget.cc:249
+#: kpilot/memoWidget.cpp:249
 msgid ""
 "This list displays all the memos\n"
 "in the selected category. Click on\n"
 "one to display it to the right."
 msgstr ""
 
-#: kpilot/memoWidget.cc:253
+#: kpilot/memoWidget.cpp:253
 msgid "Memo text:"
 msgstr ""
 
-#: kpilot/memoWidget.cc:261
+#: kpilot/memoWidget.cpp:261
 msgid "The text of the selected memo appears here."
 msgstr ""
 
-#: kpilot/memoWidget.cc:264
+#: kpilot/memoWidget.cpp:264
 msgid "Import Memo..."
 msgstr ""
 
-#: kpilot/memoWidget.cc:268
+#: kpilot/memoWidget.cpp:268
 msgid "Read a text file and add it to the Pilot's memo database."
 msgstr ""
 
-#: kpilot/memoWidget.cc:269
+#: kpilot/memoWidget.cpp:269
 msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/memoWidget.cc:272
+#: kpilot/memoWidget.cpp:272
 msgid "Export Memo..."
 msgstr ""
 
-#: kpilot/memoWidget.cc:277
+#: kpilot/memoWidget.cpp:277
 msgid "Write the selected memo to a file."
 msgstr ""
 
-#: kpilot/memoWidget.cc:279
+#: kpilot/memoWidget.cpp:279
 msgid "Delete Memo"
 msgstr ""
 
-#: kpilot/memoWidget.cc:284
+#: kpilot/memoWidget.cpp:284
 msgid "Delete the selected memo."
 msgstr ""
 
-#: kpilot/memoWidget.cc:288
+#: kpilot/memoWidget.cpp:288
 msgid "Add Memo"
 msgstr ""
 
-#: kpilot/memoWidget.cc:291
+#: kpilot/memoWidget.cpp:291
 msgid "Add a new memo to the database."
 msgstr ""
 
-#: kpilot/memoWidget.cc:343
+#: kpilot/memoWidget.cpp:343
 msgid "Delete currently selected memo?"
 msgstr ""
 
-#: kpilot/memoWidget.cc:344
+#: kpilot/memoWidget.cpp:344
 msgid "Delete Memo?"
 msgstr ""
 
-#: kpilot/memoWidget.cc:367
+#: kpilot/memoWidget.cpp:367
 msgid "Cannot open MemoDB to delete record."
 msgstr ""
 
-#: kpilot/memoWidget.cc:368
+#: kpilot/memoWidget.cpp:368
 msgid "Cannot Delete Memo"
 msgstr ""
 
-#: kpilot/pilotComponent.cc:153
+#: kpilot/pilotComponent.cpp:153
 msgid "All"
 msgstr "ਸਭ"
 
-#: kpilot/pilotDaemon.cc:157
+#: kpilot/pilotDaemon.cpp:157
 msgid "Start &KPilot"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:159
+#: kpilot/pilotDaemon.cpp:159
 msgid "&Configure KPilot..."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:164
+#: kpilot/pilotDaemon.cpp:164
 msgid ""
 "_: Appended to names of sync types to indicate the sync will happen just one "
 "time\n"
 " (once)"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:168
+#: kpilot/pilotDaemon.cpp:168
 msgid "Default (%1)"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:185
+#: kpilot/pilotDaemon.cpp:185
 msgid "Next &Sync"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:670
+#: kpilot/pilotDaemon.cpp:670
 msgid "Next HotSync will be: %1. "
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:902
+#: kpilot/pilotDaemon.cpp:902
 msgid "HotSync is disabled while the screen is locked."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:907
+#: kpilot/pilotDaemon.cpp:907
 msgid ""
 "HotSync is disabled because KPilot could not determine the state of the "
 "screen saver. You can disable this security feature by unchecking the 'do "
@@ -2845,182 +2845,182 @@ msgid ""
 "configuration dialog."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1165 kpilot/pilotDaemon.cc:1166
+#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
 msgid "HotSync Completed.<br>"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1274
+#: kpilot/pilotDaemon.cpp:1274
 #, c-format
 msgid "Next sync is %1."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1298
+#: kpilot/pilotDaemon.cpp:1298
 msgid "Device to try first"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1299
+#: kpilot/pilotDaemon.cpp:1299
 msgid "Exit instead of complaining about bad configuration files"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1311
+#: kpilot/pilotDaemon.cpp:1311
 msgid "KPilot Daemon"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1326
+#: kpilot/pilotDaemon.cpp:1326
 msgid "Developer"
 msgstr "ਖੋਜੀ"
 
-#: kpilot/todoEditor.cc:48
+#: kpilot/todoEditor.cpp:48
 msgid "To-do Editor"
 msgstr ""
 
-#: kpilot/todoWidget.cc:174
+#: kpilot/todoWidget.cpp:174
 msgid "There are still %1 to-do editing windows open."
 msgstr ""
 
-#: kpilot/todoWidget.cc:178
+#: kpilot/todoWidget.cpp:178
 #, c-format
 msgid ""
 "_n: There is still a to-do editing window open.\n"
 "There are still %n to-do editing windows open."
 msgstr ""
 
-#: kpilot/todoWidget.cc:218
+#: kpilot/todoWidget.cpp:218
 msgid "<qt>Select the category of to-dos to display here.</qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:225
+#: kpilot/todoWidget.cpp:225
 msgid "To-do Item"
 msgstr "ਕਰਨ ਲਈ ਇਕਾਈ"
 
-#: kpilot/todoWidget.cc:243
+#: kpilot/todoWidget.cpp:243
 msgid ""
 "<qt>This list displays all the to-dos in the selected category. Click on one "
 "to display it to the right.</qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:247
+#: kpilot/todoWidget.cpp:247
 msgid "To-do info:"
 msgstr "ਕਰਨ ਲਈ ਜਾਣਕਾਰੀ:"
 
-#: kpilot/todoWidget.cc:262
+#: kpilot/todoWidget.cpp:262
 msgid "<qt>You can edit a to-do when it is selected.</qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:270
+#: kpilot/todoWidget.cpp:270
 msgid "<qt>Add a new to-do to the to-do list.</qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:271
+#: kpilot/todoWidget.cpp:271
 msgid ""
 "<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
 "qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:280
+#: kpilot/todoWidget.cpp:280
 msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:408
+#: kpilot/todoWidget.cpp:408
 msgid ""
 "You cannot add to-dos to the to-do list until you have done a HotSync at "
 "least once to retrieve the database layout from your Pilot."
 msgstr ""
 
-#: kpilot/todoWidget.cc:411
+#: kpilot/todoWidget.cpp:411
 msgid "Cannot Add New To-do"
 msgstr ""
 
-#: lib/actionQueue.cc:136
+#: lib/actionQueue.cpp:136
 msgid ""
 "The connection to the handheld was lost. Synchronization cannot continue."
 msgstr ""
 
-#: lib/actions.cc:54
+#: lib/actions.cpp:54
 msgid "KPilot %1 HotSync starting...\n"
 msgstr ""
 
-#: lib/actions.cc:56
+#: lib/actions.cpp:56
 msgid "Using encoding %1 on the handheld."
 msgstr ""
 
-#: lib/actions.cc:67
+#: lib/actions.cpp:67
 msgid "KPilot is busy and cannot process the HotSync right now."
 msgstr ""
 
-#: lib/actions.cc:114
+#: lib/actions.cpp:114
 msgid "Testing.\n"
 msgstr ""
 
-#: lib/actions.cc:130
+#: lib/actions.cpp:130
 msgid "Syncing database %1..."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:148
+#: lib/kpilotdevicelink.cpp:148
 msgid "Could not open device: %1 (will retry)"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:187
+#: lib/kpilotdevicelink.cpp:187
 msgid "Trying to open device %1..."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:241
+#: lib/kpilotdevicelink.cpp:241
 msgid "Already listening on that device"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:261
+#: lib/kpilotdevicelink.cpp:261
 msgid "Cannot create socket for communicating with the Pilot (%1)"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:289
+#: lib/kpilotdevicelink.cpp:289
 msgid "Cannot open Pilot port \"%1\". "
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:391
+#: lib/kpilotdevicelink.cpp:391
 msgid "Cannot listen on Pilot socket (%1)"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:411 lib/kpilotdevicelink.cc:426
+#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
 msgid "Cannot accept Pilot (%1)"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:427
+#: lib/kpilotdevicelink.cpp:427
 msgid "already connected"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:441
+#: lib/kpilotdevicelink.cpp:441
 msgid "Unable to read system information from Pilot"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:478
+#: lib/kpilotdevicelink.cpp:478
 msgid "Checking last PC..."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:487
+#: lib/kpilotdevicelink.cpp:487
 msgid ""
 "Could not read user information from the Pilot. Perhaps you have a password "
 "set on the device?"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:670
+#: lib/kpilotdevicelink.cpp:670
 msgid "The Pilot device is not configured yet."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:709
+#: lib/kpilotdevicelink.cpp:709
 msgid "Pilot device %1 is not read-write."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:719
+#: lib/kpilotdevicelink.cpp:719
 msgid ""
 "Pilot device %1 does not exist. Probably it is a USB device and will appear "
 "during a HotSync."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:765 lib/kpilotdevicelink.cc:774
+#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
 msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:846
+#: lib/kpilotdevicelink.cpp:846
 msgid "End of HotSync\n"
 msgstr ""
 
@@ -3041,88 +3041,88 @@ msgstr ""
 msgid " Check Pilot path and permissions."
 msgstr ""
 
-#: lib/pilotDateEntry.cc:179
+#: lib/pilotDateEntry.cpp:179
 #, c-format
 msgid "Start date: %1"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:185
+#: lib/pilotDateEntry.cpp:185
 msgid "Whole-day event"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:193
+#: lib/pilotDateEntry.cpp:193
 #, c-format
 msgid "End date: %1"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:200
+#: lib/pilotDateEntry.cpp:200
 msgid ""
 "_: %1 is the duration, %2 is the time unit\n"
 "Alarm: %1 %2 before event starts"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:204
+#: lib/pilotDateEntry.cpp:204
 msgid "minutes"
 msgstr "ਮਿੰਟ"
 
-#: lib/pilotDateEntry.cc:205
+#: lib/pilotDateEntry.cpp:205
 msgid "hours"
 msgstr "ਘੰਟੇ"
 
-#: lib/pilotDateEntry.cc:206
+#: lib/pilotDateEntry.cpp:206
 msgid "days"
 msgstr "ਦਿਨ"
 
-#: lib/pilotDateEntry.cc:216
+#: lib/pilotDateEntry.cpp:216
 msgid "Recurrence: every %1 %2"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:222
+#: lib/pilotDateEntry.cpp:222
 msgid "day(s)"
 msgstr "ਦਿਨ"
 
-#: lib/pilotDateEntry.cc:223
+#: lib/pilotDateEntry.cpp:223
 msgid "week(s)"
 msgstr "ਹਫਤਾ"
 
-#: lib/pilotDateEntry.cc:225
+#: lib/pilotDateEntry.cpp:225
 msgid "month(s)"
 msgstr "ਮਹੀਨੇ"
 
-#: lib/pilotDateEntry.cc:226
+#: lib/pilotDateEntry.cpp:226
 msgid "year(s)"
 msgstr "ਸਾਲ"
 
-#: lib/pilotDateEntry.cc:235
+#: lib/pilotDateEntry.cpp:235
 msgid "Repeats indefinitely"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:240
+#: lib/pilotDateEntry.cpp:240
 #, c-format
 msgid "Until %1"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:244
+#: lib/pilotDateEntry.cpp:244
 msgid "Repeating on the i-th day of week j"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:245
+#: lib/pilotDateEntry.cpp:245
 msgid "Repeating on the n-th day of the month"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:263
+#: lib/pilotDateEntry.cpp:263
 msgid "Exceptions:"
 msgstr ""
 
-#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
 msgid "<b><em>Note:</em></b><br>"
 msgstr "<b><em>ਸੂਚਨਾ:</em></b><br>"
 
-#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
 msgid "Note:\n"
 msgstr "ਸੂਚਨਾ:\n"
 
-#: lib/pilotMemo.cc:81
+#: lib/pilotMemo.cpp:81
 msgid ""
 "<i>Title:</i> %1<br>\n"
 "<i>MemoText:</i><br>%2"
@@ -3130,7 +3130,7 @@ msgstr ""
 "<i>ਸਿਰਲੇਖ:</i> %1<br>\n"
 "<i>ਯਾਦ ਪਾਠ:</i><br>%2"
 
-#: lib/pilotMemo.cc:86
+#: lib/pilotMemo.cpp:86
 msgid ""
 "Title: %1\n"
 "MemoText:\n"
@@ -3140,69 +3140,69 @@ msgstr ""
 "ਯਾਦ ਪਾਠ:\n"
 "%2"
 
-#: lib/pilotTodoEntry.cc:133
+#: lib/pilotTodoEntry.cpp:133
 msgid "Completed"
 msgstr "ਮੁਕੰਮਲ"
 
-#: lib/pilotTodoEntry.cc:135
+#: lib/pilotTodoEntry.cpp:135
 msgid "Not completed"
 msgstr "ਮੁਕੰਮਲ ਨਹੀਂ"
 
-#: lib/pilotTodoEntry.cc:143
+#: lib/pilotTodoEntry.cpp:143
 #, c-format
 msgid "Due date: %1"
 msgstr "ਮਿਆਦ: %1"
 
-#: lib/pilotTodoEntry.cc:151
+#: lib/pilotTodoEntry.cpp:151
 #, c-format
 msgid "Priority: %1"
 msgstr "ਦਰਜਾ: %1"
 
-#: lib/plugin.cc:73
+#: lib/plugin.cpp:73
 msgid "Unnamed"
 msgstr "ਬਿਨਾਂ-ਨਾਂ"
 
-#: lib/plugin.cc:93
+#: lib/plugin.cpp:93
 msgid ""
 "<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
 "the changes before continuing?</qt>"
 msgstr ""
 
-#: lib/plugin.cc:105
+#: lib/plugin.cpp:105
 msgid "%1 Conduit"
 msgstr ""
 
-#: lib/plugin.cc:144
+#: lib/plugin.cpp:144
 msgid "Send questions and comments to [email protected]"
 msgstr ""
 
-#: lib/plugin.cc:194
+#: lib/plugin.cpp:194
 msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
 msgstr ""
 
-#: lib/plugin.cc:198
+#: lib/plugin.cpp:198
 msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
 msgstr ""
 
-#: lib/plugin.cc:202
+#: lib/plugin.cpp:202
 msgid ""
 "For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
 "\">KPilot User's Guide</a>."
 msgstr ""
 
-#: lib/plugin.cc:213
+#: lib/plugin.cpp:213
 msgid "<b>Authors:</b> "
 msgstr ""
 
-#: lib/plugin.cc:234
+#: lib/plugin.cpp:234
 msgid "<b>Credits:</b> "
 msgstr ""
 
-#: lib/plugin.cc:480
+#: lib/plugin.cpp:480
 msgid "Large Changes Detected"
 msgstr ""
 
-#: lib/plugin.cc:482
+#: lib/plugin.cpp:482
 msgid ""
 "The %1 conduit has made a large number of changes to your %2.  Do you want "
 "to allow this change?\n"
@@ -3210,94 +3210,94 @@ msgid ""
 "\t%3"
 msgstr ""
 
-#: lib/plugin.cc:536
+#: lib/plugin.cpp:536
 #, c-format
 msgid "Could not find conduit %1."
 msgstr ""
 
-#: lib/plugin.cc:559
+#: lib/plugin.cpp:559
 #, c-format
 msgid "Could not load conduit %1."
 msgstr ""
 
-#: lib/plugin.cc:571
+#: lib/plugin.cpp:571
 msgid "Conduit %1 has wrong version (%2)."
 msgstr ""
 
-#: lib/plugin.cc:581
+#: lib/plugin.cpp:581
 #, c-format
 msgid "Could not initialize conduit %1."
 msgstr ""
 
-#: lib/plugin.cc:594 lib/plugin.cc:603
+#: lib/plugin.cpp:594 lib/plugin.cpp:603
 #, c-format
 msgid "Could not create conduit %1."
 msgstr ""
 
-#: lib/plugin.cc:607
+#: lib/plugin.cpp:607
 msgid "[Conduit %1]"
 msgstr ""
 
-#: lib/plugin.cc:749
+#: lib/plugin.cpp:749
 msgid "Start: %1. End: %2. "
 msgstr ""
 
-#: lib/plugin.cc:751
+#: lib/plugin.cpp:751
 msgid "%1 new. "
 msgstr ""
 
-#: lib/plugin.cc:752
+#: lib/plugin.cpp:752
 msgid "%1 changed. "
 msgstr ""
 
-#: lib/plugin.cc:753
+#: lib/plugin.cpp:753
 #, fuzzy
 msgid "%1 deleted. "
 msgstr "ਹਟਾਇਆ"
 
-#: lib/plugin.cc:755
+#: lib/plugin.cpp:755
 msgid "No changes made. "
 msgstr ""
 
-#: lib/recordConduit.cc:69 lib/recordConduit.cc:289
+#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
 msgid "Unable to open the %1 database on the handheld."
 msgstr ""
 
-#: lib/recordConduit.cc:295
+#: lib/recordConduit.cpp:295
 #, c-format
 msgid "Unable to open %1."
 msgstr ""
 
-#: lib/syncAction.cc:103
+#: lib/syncAction.cpp:103
 msgid "The conduit %1 could not be executed."
 msgstr ""
 
-#: lib/syncAction.cc:205
+#: lib/syncAction.cpp:205
 msgid "Full Synchronization"
 msgstr "ਪੂਰਨ ਸਮਕਾਲੀ"
 
-#: lib/syncAction.cc:209
+#: lib/syncAction.cpp:209
 msgid "Restore From Backup"
 msgstr ""
 
-#: lib/syncAction.cc:220
+#: lib/syncAction.cpp:220
 #, fuzzy
 msgid "Test Sync"
 msgstr "HotSync"
 
-#: lib/syncAction.cc:224
+#: lib/syncAction.cpp:224
 msgid "Local Sync"
 msgstr ""
 
-#: lib/syncAction.cc:316 lib/syncAction.cc:428
+#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
 msgid "Question"
 msgstr "ਸਵਾਲ"
 
-#: lib/syncAction.cc:335 lib/syncAction.cc:448
+#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
 msgid "&Do not ask again"
 msgstr "ਮੈਨੂੰ ਮੁੜ ਨਾ ਪੁੱਛੋ(&D)"
 
-#: lib/syncAction.cc:369 lib/syncAction.cc:481
+#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
 msgid "Do not ask again"
 msgstr "ਮੈਨੂੰ ਮੁੜ ਨਾ ਪੁੱਛੋ"