Rename KDEHOME and KDEDIR

20 files changed, 85 insertions, 85 deletions

diff --git a/FAQ b/FAQ
index 5d1ea47..18f7497 100644
--- a/FAQ
+++ b/FAQ
@@ -234,14 +234,14 @@ Installation FAQ
     e.g. File and Select are missing. This is because some distributions put
     the krusaderui.rc file in the wrong directory. To solve the problem, just
     copy the krusaderui.rc file from the package krusader_trinity/krusader/
-    krusaderui.rc to $KDEDIR/share/apps/krusader/krusaderui.rc and ~/.kde/
+    krusaderui.rc to $TDEDIR/share/apps/krusader/krusaderui.rc and ~/.kde/
     share/apps/krusader/krusaderui.rc and re-run Krusader. If you have compiled
-    Krusader from sources this is often caused if the KDEDIR_-_QTDIR
+    Krusader from sources this is often caused if the TDEDIR_-_QTDIR
     environment variables are not correctly set. The result is that the
     krusaderui.rc file is installed in the wrong directory. Please read the
     following question, as well.
 9.  Some new menu items are missing after updating Krusader, what's wrong?
-    The krusaderui.rc file is stored in $KDEDIR/share/apps/krusader/
+    The krusaderui.rc file is stored in $TDEDIR/share/apps/krusader/
     krusaderui.rc. When you change the "Toolbar", KDE makes a copy of that file
     in the home directory at ~/.kde/share/apps/krusader/krusaderui.rc. If
     Krusader was previously installed on your computer, and you install a newer
@@ -468,8 +468,8 @@ Usage FAQ
 7.  Krusader reports "krarc:... protocol not supported" error at opening an
     archive file, what to do?
     Install the krarc slave properly:
-    Copy the kio_krarc.so, kio_krarc.la files into $KDEDIR/lib/trinity
-    Copy the krarc.protocol file into $KDEDIR/share/services
+    Copy the kio_krarc.so, kio_krarc.la files into $TDEDIR/lib/trinity
+    Copy the krarc.protocol file into $TDEDIR/share/services
     or the directory where the KIO slaves are placed in your Linux�
     distribution.
 8.  I get the error message "Protocol not supported by Krusader: "krarc:/path/
diff --git a/INSTALL b/INSTALL
index ab590e7..9b4ad9c 100644
--- a/INSTALL
+++ b/INSTALL
@@ -250,7 +250,7 @@ If you are looking for older releases we recommend the Sourceforge_mirrors,
 available from our project page.
 Compiling and Installing
 Compiling Krusader. What now?
-Check the environment variables KDEDIR_-_QTDIR.
+Check the environment variables TDEDIR_-_QTDIR.
 To compile and install Krusader on your system, type the following in the base
 directory of the Krusader package:
       $ ./configure
@@ -269,8 +269,8 @@ These instructions should work as well on Debian� based distributions like:
 Ubuntu�, Kubuntu�, Linspire�, Kanotix�, ...
 Add the next lines in the ~/.bashrc configuration file
 export QTDIR=/usr
-export KDEDIR=/usr
-export export KDEDIRS=/opt/krusader:/usr
+export TDEDIR=/usr
+export export TDEDIRS=/opt/krusader:/usr
 Install the build_dependencies for Krusader
 # apt-get build-dep krusader
 Download the Krusader sourcecode, unpack and enter the krusader_trinity directory.
@@ -347,15 +347,15 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       $ rm krusader-x.xx.tar.gz
    6. Change to the directory containing the sources.
       $ cd krusader-x.xx
-   7. Check the environment variables QTDIRand KDEDIR. Krusader's ./configure
+   7. Check the environment variables QTDIRand TDEDIR. Krusader's ./configure
       script needs to know where the Qt™ and KDE directories are.
       QTDIR: <path to your Qt installation> e.g. /usr/lib/qt3 or /usr/qt3
-      KDEDIR: <path to your KDE installation> e.g. /usr or /opt/trinity
+      TDEDIR: <path to your KDE installation> e.g. /usr or /opt/trinity
       Normally your distribution will set them for you, but experience has
       shown that some do not. You can easily check the values with the echo
       command.
       $ echo $QTDIR/usr/lib/qt3
-                        $ echo $KDEDIR/usr
+                        $ echo $TDEDIR/usr
       If both commands give an output, the enviroment variables are set (the
       above example are the settings of Mandriva�-Linux�). In case you receive
       empty lines, the variables are not set and you have to set them manually.
@@ -366,18 +366,18 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       /usr/lib/qt3/bin/qtconfig
       $ find /usr /opt -name tdeinit -type f 2>/dev/null
       /usr/bin/tdeinit
-      In this case /usr/lib/qt3 is your QTDIR and /usr is your KDEDIR. The
+      In this case /usr/lib/qt3 is your QTDIR and /usr is your TDEDIR. The
       installed binaries will go to /usr/bin. Now we will set the enviroment
       variables with the export command.
       $ export QTDIR=<replace with your QTDIR>
-      $ export KDEDIR=<replace with your KDEDIR>
+      $ export TDEDIR=<replace with your TDEDIR>
       **** Note ****
       These enviroment variables are only set for the lifetime of your current
       shell. When you close your terminal and open a new one they will be gone.
       Assuming Krusader is not the only Qt&#8482;/KDE program you want to
       compile, we recommend to make these settings permanent (e.g. append both
       export commands to your /etc/profile) file.
-      If you can notdetermine your KDEDIR, kde-config --prefix might help you.
+      If you can notdetermine your TDEDIR, kde-config --prefix might help you.
    8. If you have downloaded a stable version "krusader-x.xx.tar.gz" or a beta
       version "krusader-x.xx-betax.tar.gz", you can skip this step. In this
       case the ./configure script is provided.
@@ -410,7 +410,7 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       two nightly builds (snapshots) one with a ./configure script and one
       without.
    9. Your Linux� distro Krusader RPM or DEB package will normally install
-      Krusader in the KDEDIR/bin directory. According to the Filesystem
+      Krusader in the TDEDIR/bin directory. According to the Filesystem
       Hierarchy_Standard_(FHS), any user installed files go to the /usr/local
       directory. If you wish Krusader to be installed in another directory, it
       can be determed with the prefix option. If you do not have root access, /
@@ -433,7 +433,7 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       kde_locale:           /usr/share/locale
       qt_libraries:         /usr/lib/qt3/lib
       qt_includes:          /usr/lib/qt3/include
-      KDEDIR:               /usr
+      TDEDIR:               /usr
       QTDIR:                /usr/lib/qt3
       Install path:         /usr/local/bin
       krusader version:     1.80.0
@@ -448,7 +448,7 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       At the end of the ./configure script you will find a summary of the most
       important settings, e.g. where the Krusader binary will be installed
       (after the 'make install' command). This part will also display a warning
-      if the environment variables KDEDIR_-_QTDIR are empty.
+      if the environment variables TDEDIR_-_QTDIR are empty.
       Since Krusader-1.70.0 ./configure has two specific Krusader options:
           * ./configure --without-konqueror: build Krusader without support
             Konqueror's servicemenus, default=with. This means that Konqueror's
@@ -463,13 +463,13 @@ the FAQ. If the problem persists, use the help_request to ask for help.
       found, now you have the choice.
       Use ./configure --helpto see more options or read the INSTALL file in the
       Krusader sources.
-      If you used another --prefix= than $KDEDIR or /usr/local, it is
+      If you used another --prefix= than $TDEDIR or /usr/local, it is
       recommended to do an extra check:
       $ kde-config --path exe
       /home/frank/.kde/bin/:/usr/bin/:/usr/local/bin/
       $
       If the <prefix_dir/bin> directory is not shown, you need to use e.g.
-      export KDEDIRS=/usr/local:/usr. To make these settings permanent you can
+      export TDEDIRS=/usr/local:/usr. To make these settings permanent you can
       e.g. append this export command to your /etc/profile file. After that you
       need to restart KDE.
       **** Note ****
diff --git a/README b/README
index 37f48c4..195a1a4 100644
--- a/README
+++ b/README
@@ -119,7 +119,7 @@ Notice: if you've got bugs to report, please do so using Krusader's
 
 Installation
 ============
-Check the environment variables KDEDIR - QTDIR.
+Check the environment variables TDEDIR - QTDIR.
 
 Unpack the tarball and go to the Krusader source directory.
 If you have downloaded from CVS you will have to run the following
diff --git a/acinclude.m4 b/acinclude.m4
index c18ad2a..75d1363 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -382,13 +382,13 @@ same compiler to compile Qt and tdelibs as you did use now.
 For more details about this problem, look at the end of config.log.])
 fi
 
-if eval `KDEDIR= ./conftest 2>&5`; then
+if eval `TDEDIR= ./conftest 2>&5`; then
   kde_result=done
 else
   kde_result=problems
 fi
 
-KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
+TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
 kde_have_all_paths=yes
 
 KDE_SET_PATHS($kde_result)
@@ -547,11 +547,11 @@ Please check whether you installed aRts correctly or use
 AC_DEFUN([KDE_SET_DEFAULT_BINDIRS],
 [
     kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/trinity/bin /usr/kde/bin /usr/local/kde/bin"
-    test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs"
-    if test -n "$KDEDIRS"; then
+    test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs"
+    if test -n "$TDEDIRS"; then
        kde_save_IFS=$IFS
        IFS=:
-       for dir in $KDEDIRS; do
+       for dir in $TDEDIRS; do
             kde_default_bindirs="$dir/bin $kde_default_bindirs "
        done
        IFS=$kde_save_IFS
@@ -613,7 +613,7 @@ AC_DEFUN([KDE_SUBST_PROGRAMS],
 
         if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then
  	    kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/trinity/share /opt/kde/share $prefix/share"
-            test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs"
+            test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs"
             AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET)
 	    if test "$KDE_XSL_STYLESHEET" = "NO"; then
 		KDE_XSL_STYLESHEET=""
@@ -1794,7 +1794,7 @@ fi
 if test -z "$1"; then
 
 kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/trinity/include /opt/kde/include $x_includes $qt_includes"
-test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
+test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/kde $TDEDIR $kde_incdirs"
 kde_incdirs="$ac_kde_includes $kde_incdirs"
 AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir)
 ac_kde_includes="$kde_incdir"
@@ -1806,7 +1806,7 @@ So, check this please and use another prefix!])
 fi
 
 kde_libdirs="$kde_libs_prefix/lib${tdelibsuff} /usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/trinity /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/trinity/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}"
-test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${tdelibsuff} $KDEDIR $kde_libdirs"
+test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs"
 kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
 AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir)
 ac_kde_libraries="$kde_libdir"
@@ -3549,7 +3549,7 @@ AC_CANONICAL_SYSTEM
 AC_ARG_PROGRAM
 AM_INIT_AUTOMAKE($1, $2)
 AM_DISABLE_LIBRARIES
-AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
 AC_CHECK_COMPILERS
 KDE_PROG_LIBTOOL
 AM_KDE_WITH_NLS
@@ -4948,12 +4948,12 @@ AC_DEFUN([KDE_CONF_FILES],
 
 dnl This sets the prefix, for arts and tdelibs
 dnl Do NOT use in any other module.
-dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde
+dnl It only looks at --prefix, TDEDIR and falls back to /usr/local/kde
 AC_DEFUN([KDE_SET_PREFIX_CORE],
 [
   unset CDPATH
-  dnl make $KDEDIR the default for the installation
-  AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde})
+  dnl make $TDEDIR the default for the installation
+  AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde})
 
   if test "x$prefix" = "xNONE"; then
     prefix=$ac_default_prefix
@@ -4977,7 +4977,7 @@ AC_DEFUN([KDE_SET_PREFIX],
   unset CDPATH
   dnl We can't give real code to that macro, only a value.
   dnl It only matters for --help, since we set the prefix in this function anyway.
-  AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix})
+  AC_PREFIX_DEFAULT(${TDEDIR:-the kde prefix})
 
   KDE_SET_DEFAULT_BINDIRS
   if test "x$prefix" = "xNONE"; then
diff --git a/configure.in b/configure.in
index ed07f5e..a55d204 100644
--- a/configure.in
+++ b/configure.in
@@ -209,7 +209,7 @@ AC_CONFIG_FILES([ tar/Makefile ])
 AC_CONFIG_FILES([ virt/Makefile ])
 AC_OUTPUT
 # added manualy, it dumps a summary of the most important settings
-# and displays a warning if the KDEDIR or QTDIR is empty
+# and displays a warning if the TDEDIR or QTDIR is empty
 echo "
 Krusader Project:
 -----------------
@@ -223,7 +223,7 @@ Krusader Project:
   kde_locale:           ${prefix}/share/locale
   qt_libraries:         ${ac_qt_libraries}
   qt_includes:          ${ac_qt_includes}
-  KDEDIR:               ${KDEDIR}
+  TDEDIR:               ${TDEDIR}
   QTDIR:                ${QTDIR}
   Install path:         ${prefix}/bin
   krusader version:     ${VERSION}
@@ -241,7 +241,7 @@ if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
       echo "Warning: you chose to install this package in $given_prefix,"
       echo "but KDE was found in $kde_libs_prefix."
       echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
+      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
       echo "Then restart KDE."
       echo ""
     fi
@@ -284,8 +284,8 @@ if (test $with_tar != "no");
    then echo "NOTICE:  Our write-enabled version of KDE's tar KIO-Slave will be build. \"make install\" will may overwrite the KDE-version!"
 fi
 
-if (test -z "$KDEDIR");
-   then echo "WARNING:  KDEDIR enviroment variable is empty! Please read Krusader FAQ"
+if (test -z "$TDEDIR");
+   then echo "WARNING:  TDEDIR enviroment variable is empty! Please read Krusader FAQ"
 fi
 
 if (test -z "$QTDIR");
diff --git a/doc/en/commands.docbook b/doc/en/commands.docbook
index fc8f6a6..6e113e8 100644
--- a/doc/en/commands.docbook
+++ b/doc/en/commands.docbook
@@ -1795,7 +1795,7 @@
           &krusader; key-bindings can not be changed yet,
           as well as some features in foo-commander that we either
           do not have or need. The Key-bindings are stored in 
-          <filename>$KDEDIR/share/apps/krusader</filename>, 
+          <filename>$TDEDIR/share/apps/krusader</filename>, 
           <filename>foo.keymap.info</filename> contains a
           description, 
           <filename>foo.keymap</filename> is an ini file that holds
diff --git a/doc/en/configuration-files.docbook b/doc/en/configuration-files.docbook
index 9b94149..c86a5b1 100644
--- a/doc/en/configuration-files.docbook
+++ b/doc/en/configuration-files.docbook
@@ -33,7 +33,7 @@
   <link linkend="faqi_krusaderui_rc">krusaderui.rc
   &FAQ;</link>.</para>
   <para>Location: 
-  <filename>$KDEDIR/share/apps/krusader/krusaderui.rc</filename> or 
+  <filename>$TDEDIR/share/apps/krusader/krusaderui.rc</filename> or 
   <filename>
   ~/.kde/share/apps/krusader/krusaderui.rc</filename></para>
   <para>
@@ -143,7 +143,7 @@
   UserActionXML.</para>
   <para>Location: 
   <filename>
-  $KDEDIR/share/apps/krusader/useraction-examples.xml</filename></para>
+  $TDEDIR/share/apps/krusader/useraction-examples.xml</filename></para>
   <para>
     <emphasis role="bold">foo.keymap</emphasis>
   </para>
@@ -154,12 +154,12 @@
   legacy binary format.</para>
   <para>Location: 
   <filename>
-  $KDEDIR/share/apps/krusader/foo.keymap</filename></para>
+  $TDEDIR/share/apps/krusader/foo.keymap</filename></para>
   <para>
     <emphasis role="bold">foo.color</emphasis>
   </para>
   <para>This is a binary file that holds the 
   <link linkend="konfig-color">Color Scheme</link>.</para>
   <para>Location: 
-  <filename>$KDEDIR/share/apps/krusader/foo.color</filename></para>
+  <filename>$TDEDIR/share/apps/krusader/foo.color</filename></para>
 </appendix>
diff --git a/doc/en/faq.docbook b/doc/en/faq.docbook
index 1d05eb7..f21d839 100644
--- a/doc/en/faq.docbook
+++ b/doc/en/faq.docbook
@@ -385,7 +385,7 @@
           <filename>
           krusader_trinity/krusader/krusaderui.rc</filename> to 
           <filename>
-          $KDEDIR/share/apps/krusader/krusaderui.rc</filename> and 
+          $TDEDIR/share/apps/krusader/krusaderui.rc</filename> and 
           <filename>
           ~/.kde/share/apps/krusader/krusaderui.rc</filename> and
           re-run &krusader;. If you have compiled
@@ -408,7 +408,7 @@
           <para>The 
           <filename>krusaderui.rc</filename> file is stored in 
           <filename>
-          $KDEDIR/share/apps/krusader/krusaderui.rc</filename>.
+          $TDEDIR/share/apps/krusader/krusaderui.rc</filename>.
           When you change the 
           <guilabel>"Toolbar"</guilabel>, &kde; makes a
           copy of that file in the home directory at 
@@ -930,11 +930,11 @@
           <filename>kio_krarc.so</filename>, 
           <filename>kio_krarc.la</filename> files into 
           <filename class="directory">
-          $KDEDIR/lib/trinity</filename></para>
+          $TDEDIR/lib/trinity</filename></para>
           <para>Copy the 
           <filename>krarc.protocol</filename> file into 
           <filename class="directory">
-          $KDEDIR/share/services</filename></para>
+          $TDEDIR/share/services</filename></para>
           <para>or the directory where the KIO slaves are placed in
           your &Linux; distribution.</para>
           <para></para>
diff --git a/doc/en/index.docbook b/doc/en/index.docbook
index 8bff803..e12ff22 100644
--- a/doc/en/index.docbook
+++ b/doc/en/index.docbook
@@ -226,7 +226,7 @@ http://groups.google.com/group/krusader-devel/browse_thread/thread/d102adec2edcf
 <!ENTITY syncdirs-lnk '<link linkend="synchronizer">Synchronize Directories</link>'>
 <!ENTITY splitfile-lnk '<link linkend="splitter">Split file</link>'>
 <!ENTITY combinefiles-lnk '<link linkend="splitter">Combine files</link>'>
-<!ENTITY kdeqtdir-lnk '<link linkend="kde_qt_dir"><envar>KDEDIR</envar> - <envar>QTDIR</envar></link>'>
+<!ENTITY kdeqtdir-lnk '<link linkend="kde_qt_dir"><envar>TDEDIR</envar> - <envar>QTDIR</envar></link>'>
 <!ENTITY useractions-lnk '<link linkend="useractions">UserActions</link>'>
 <!ENTITY usermenu-lnk '<link linkend="useractions">User Menu</link>'>
 <!ENTITY faq-lnk '<link linkend="faq">FAQ</link>'>
diff --git a/doc/en/installation.docbook b/doc/en/installation.docbook
index 5458a0d..478e8d9 100644
--- a/doc/en/installation.docbook
+++ b/doc/en/installation.docbook
@@ -431,8 +431,8 @@
 <para>Add the next lines in the <filename>~/.bashrc</filename> configuration file
 <screen>
 <userinput><command>export</command> <option>QTDIR=/usr</option></userinput>
-<userinput><command>export</command> <option>KDEDIR=/usr</option></userinput>
-<userinput><command>export</command> <option>export KDEDIRS=/opt/krusader:/usr</option></userinput>
+<userinput><command>export</command> <option>TDEDIR=/usr</option></userinput>
+<userinput><command>export</command> <option>export TDEDIRS=/opt/krusader:/usr</option></userinput>
 </screen>
 </para>
 
@@ -596,7 +596,7 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
         <listitem id="kde_qt_dir">
           <para>Check the environment variables 
           <envar>QTDIR</envar>and 
-          <envar>KDEDIR</envar>. &krusader;'s 
+          <envar>TDEDIR</envar>. &krusader;'s 
           <command>./configure</command> script needs to know where
           the &Qt; and &kde; directories
           are.</para>
@@ -607,7 +607,7 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
           <filename>/usr/lib/qt3</filename> or 
           <filename>/usr/qt3</filename></para>
           <para>
-          <envar>KDEDIR</envar>: 
+          <envar>TDEDIR</envar>: 
           <replaceable>&lt;path to your KDE
           installation&gt;</replaceable> &eg; 
           <filename>/usr</filename> or 
@@ -617,7 +617,7 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
           check the values with the 
           <command>echo</command> command. 
           <screen><prompt>$</prompt> <userinput><command>echo</command> $QTDIR</userinput>/usr/lib/qt3
-                  <prompt>$</prompt> <userinput><command>echo</command> $KDEDIR</userinput>/usr</screen>
+                  <prompt>$</prompt> <userinput><command>echo</command> $TDEDIR</userinput>/usr</screen>
 
           If both commands give an output, the enviroment variables
           are set (the above example are the settings of
@@ -636,12 +636,12 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
           <filename>/usr/lib/qt3</filename> is your 
           <envar>QTDIR</envar> and 
           <filename>/usr</filename> is your 
-          <envar>KDEDIR</envar>. The installed binaries will go to 
+          <envar>TDEDIR</envar>. The installed binaries will go to 
           <filename>/usr/bin</filename>. Now we will set the
           enviroment variables with the 
           <command>export</command> command. 
           <screen><prompt>$</prompt> <userinput><command>export</command> QTDIR=<replaceable>&lt;replace with your QTDIR&gt;</replaceable></userinput></screen>
-          <screen><prompt>$</prompt> <userinput><command>export</command> KDEDIR=<replaceable>&lt;replace with your KDEDIR&gt;</replaceable></userinput></screen>
+          <screen><prompt>$</prompt> <userinput><command>export</command> TDEDIR=<replaceable>&lt;replace with your TDEDIR&gt;</replaceable></userinput></screen>
           </para>
           <note>
             <para>These enviroment variables are only set for the
@@ -654,7 +654,7 @@ Please don't use the <filename>/usr/local</filename> directory as it simply won'
             <filename class="directory">/etc/profile</filename>)
             file.</para>
           </note>
-          <para>If you can notdetermine your KDEDIR, 
+          <para>If you can notdetermine your TDEDIR, 
           <command>kde-config --prefix</command> might help
           you.</para>
           <para></para>
@@ -721,7 +721,7 @@ If you haven't done so in a while, run ./configure --help
           <para>Your &Linux; distro
           &krusader; RPM or DEB package will normally
           install &krusader; in the 
-          <filename>KDEDIR/bin</filename> directory. According to
+          <filename>TDEDIR/bin</filename> directory. According to
           the &fhs-url;, any user installed files go to
           the 
           <filename>/usr/local</filename> directory. If you wish
@@ -747,7 +747,7 @@ kde_includes:         /usr/lib
 kde_locale:           /usr/share/locale
 qt_libraries:         /usr/lib/qt3/lib
 qt_includes:          /usr/lib/qt3/include
-KDEDIR:               /usr
+TDEDIR:               /usr
 QTDIR:                /usr/lib/qt3
 Install path:         /usr/local/bin
 krusader version:     1.80.0
@@ -815,7 +815,7 @@ Good - your configure finished. Start make now
           <filename>INSTALL</filename> file in the
           &krusader; sources.</para>
           <para>If you used another --prefix= than 
-          <filename>$KDEDIR or /usr/local</filename>, it is
+          <filename>$TDEDIR or /usr/local</filename>, it is
           recommended to do an extra check: 
 <screen><prompt>$</prompt> <userinput><command>kde-config</command> <option>--path exe</option></userinput>
 /home/frank/.kde/bin/:/usr/bin/:/usr/local/bin/   
@@ -823,7 +823,7 @@ Good - your configure finished. Start make now
           If the
           &lt;prefix_dir/bin&gt; directory is
           not shown, you need to use e.g. 
-          <command>export KDEDIRS=/usr/local:/usr</command>. To
+          <command>export TDEDIRS=/usr/local:/usr</command>. To
           make these settings permanent you can &eg;
           append this export command to your 
           <filename>/etc/profile</filename> file. After that you
diff --git a/doc/en/konfigurator.docbook b/doc/en/konfigurator.docbook
index 0cd72f1..ab23a78 100644
--- a/doc/en/konfigurator.docbook
+++ b/doc/en/konfigurator.docbook
@@ -806,7 +806,7 @@ HTML_PARSING-->
           &krusader; to use &tcmd;,
           &mc;, foo-commander or your own custom color
           profile. The Color Schemes are stored in 
-          <filename>$KDEDIR/share/apps/krusader</filename>, the 
+          <filename>$TDEDIR/share/apps/krusader</filename>, the 
           <filename>foo.color</filename> is a binary file that holds
           the color scheme.</para>
           <tip>
diff --git a/doc/krusader.1 b/doc/krusader.1
index 4f9945b..cf8633e 100644
--- a/doc/krusader.1
+++ b/doc/krusader.1
@@ -61,7 +61,7 @@ Configuration files:
 
 .I ~/.kde/share/apps/krusader/krbookmarks.xml
 
-.I $KDEDIR/share/apps/krusader/krusaderui.rc or
+.I $TDEDIR/share/apps/krusader/krusaderui.rc or
 
 .I ~/.kde/share/apps/krusader/krusaderui.rc
 
diff --git a/doc/ru/commands.docbook b/doc/ru/commands.docbook
index 65f813a..538d2d7 100644
--- a/doc/ru/commands.docbook
+++ b/doc/ru/commands.docbook
@@ -1517,7 +1517,7 @@
 > <guibutton
 >Export shortcuts</guibutton
 > buttons you can load and save a Key-binding profile. This allows &krusader; to have the &tcmd;, &mc;, foo-commander, or your custom Key-bindings. The only limitation is that global &kde; key-bindings and some &krusader; key-bindings can't be changed yet, as well as some features in foo-commander that we either don't have or don't need. The Key-bindings are stored in <filename
->$KDEDIR/share/apps/krusader</filename
+>$TDEDIR/share/apps/krusader</filename
 >, <filename
 >foo.keymap.info</filename
 > contains a description, <filename
diff --git a/doc/ru/configuration-files.docbook b/doc/ru/configuration-files.docbook
index 5e53d77..ae42899 100644
--- a/doc/ru/configuration-files.docbook
+++ b/doc/ru/configuration-files.docbook
@@ -38,7 +38,7 @@
 >.</para>
 <para
 >Location: <filename
->$KDEDIR/share/apps/krusader/krusaderui.rc</filename
+>$TDEDIR/share/apps/krusader/krusaderui.rc</filename
 > or <filename
 >~/.kde/share/apps/krusader/krusaderui.rc</filename
 ></para>
@@ -189,7 +189,7 @@
 >The default User-Actions provided by us. The file-structure is documented in doxygen-headers of UserActionXML.</para>
 <para
 >Location: <filename
->$KDEDIR/share/apps/krusader/useraction_examples.xml</filename
+>$TDEDIR/share/apps/krusader/useraction_examples.xml</filename
 ></para>
 
 <para
@@ -202,7 +202,7 @@
 >. Until &krusader;-1.70.0 this was a binary file, &krusader; is backwards compatible for importing this legacy binary format.</para>
 <para
 >Location: <filename
->$KDEDIR/share/apps/krusader/foo.keymap</filename
+>$TDEDIR/share/apps/krusader/foo.keymap</filename
 ></para>
 
 
@@ -216,7 +216,7 @@
 >.</para>
 <para
 >Location: <filename
->$KDEDIR/share/apps/krusader/foo.color</filename
+>$TDEDIR/share/apps/krusader/foo.color</filename
 ></para>
 
 
diff --git a/doc/ru/faq.docbook b/doc/ru/faq.docbook
index d9d79c3..98587ce 100644
--- a/doc/ru/faq.docbook
+++ b/doc/ru/faq.docbook
@@ -402,7 +402,7 @@
 > file from the package <filename
 >krusader_trinity/krusader/krusaderui.rc</filename
 > to <filename
->$KDEDIR/share/apps/krusader/krusaderui.rc</filename
+>$TDEDIR/share/apps/krusader/krusaderui.rc</filename
 > and <filename
 >~/.kde/share/apps/krusader/krusaderui.rc</filename
 > and re-run &krusader;. If you have compiled &krusader; from sources this is often caused when the &kdeqtdir_lnk; environment variables are not correctly set. The result is that the <filename
@@ -422,7 +422,7 @@
 >Файл <filename
 >krusaderui.rc</filename
 > хранится в <filename
->$KDEDIR/share/apps/krusader/krusaderui.rc</filename
+>$TDEDIR/share/apps/krusader/krusaderui.rc</filename
 >. Если  вы выбрали новую <guilabel
 >"Панель"</guilabel
 > ,&kde; создаст копию файла <filename
@@ -909,13 +909,13 @@
 >, <filename
 >kio_krarc.la</filename
 > в <filename class="directory"
->$KDEDIR/lib/trinity</filename
+>$TDEDIR/lib/trinity</filename
 ></para>
         <para
 >Копируйте <filename
 >krarc.protocol</filename
 > в <filename class="directory"
->$KDEDIR/share/services</filename
+>$TDEDIR/share/services</filename
 ></para>
         <para
 >или директорию , в которой находятся KIO slaves вашего дистрибутива &Linux;. </para>
diff --git a/doc/ru/index.docbook b/doc/ru/index.docbook
index 8834588..8997d09 100644
--- a/doc/ru/index.docbook
+++ b/doc/ru/index.docbook
@@ -518,7 +518,7 @@ since the Entity Backspace is not defined in
 >'>
 <!ENTITY kdeqtdir_lnk '<link linkend="kde_qt_dir"
 ><envar
->KDEDIR</envar
+>TDEDIR</envar
 > - <envar
 >QTDIR</envar
 ></link
diff --git a/doc/ru/installation.docbook b/doc/ru/installation.docbook
index cd67f34..064dc04 100644
--- a/doc/ru/installation.docbook
+++ b/doc/ru/installation.docbook
@@ -496,7 +496,7 @@
 >Check the environment variables <envar
 >QTDIR</envar
 > and <envar
->KDEDIR</envar
+>TDEDIR</envar
 >. &krusader;'s <command
 >./configure</command
 > script needs to know where the &Qt; and &kde; directories are. </para>
@@ -514,7 +514,7 @@
 
 <para
 ><envar
->KDEDIR</envar
+>TDEDIR</envar
 > : <replaceable
 >&lt;path to your KDE installation&gt;</replaceable
 > &eg; <filename
@@ -529,7 +529,7 @@
 > command. <screen
 ><prompt>$</prompt> <userinput><command>echo</command> $QTDIR</userinput>
 /usr/lib/qt3
-<prompt>$</prompt> <userinput><command>echo</command> $KDEDIR</userinput>
+<prompt>$</prompt> <userinput><command>echo</command> $TDEDIR</userinput>
 /usr</screen
 > If both commands give an output, the enviroment variables are set (the above example are the settings of &mandriva;-&Linux;). In case you just receive empty lines, the variables are not set and you have to set them it manually. If you have no idea what to set the variables to, or if you want to check if the variables are correctly set, ask your distributor or use the <command
 >find</command
@@ -545,7 +545,7 @@
 > and <filename
 >/usr</filename
 > is your <envar
->KDEDIR</envar
+>TDEDIR</envar
 >. The installed binaries will go to <filename
 >/usr/bin</filename
 >. Now we will set the enviroment variables with the <command
@@ -553,7 +553,7 @@
 > command. <screen
 ><prompt>$</prompt> <userinput><command>export</command> QTDIR=<replaceable>&lt;replace with your QTDIR&gt;</replaceable></userinput></screen>
 <screen
-><prompt>$</prompt> <userinput><command>export</command> KDEDIR=<replaceable>&lt;replace with your KDEDIR&gt;</replaceable></userinput></screen>
+><prompt>$</prompt> <userinput><command>export</command> TDEDIR=<replaceable>&lt;replace with your TDEDIR&gt;</replaceable></userinput></screen>
 </para>
 
   <note
@@ -564,7 +564,7 @@
 ></note>
 
 <para
->If you can't determine your KDEDIR than <command
+>If you can't determine your TDEDIR than <command
 >kde-config --prefix</command
 > might help you.</para>
 
@@ -642,7 +642,7 @@ If you haven't done so in a while, run ./configure --help
 <listitem>
   <para
 >Your &Linux; distro &krusader; RPM or DEB package will usually install &krusader; in the <filename
->KDEDIR/bin</filename
+>TDEDIR/bin</filename
 > directory. According to the &fhs_url;, any user installed files should go to the <filename
 >/usr/local</filename
 > directory, but in some cases you might want that &krusader; will be installed in an other directory, this behaviour can be determed with the prefix option. If you don't have root access <filename
@@ -673,7 +673,7 @@ kde_includes:         /usr/lib
 kde_locale:           /usr/share/locale
 qt_libraries:         /usr/lib/qt3/lib
 qt_includes:          /usr/lib/qt3/include
-KDEDIR:               /usr
+TDEDIR:               /usr
 QTDIR:                /usr/lib/qt3
 Install path:         /usr/local/bin
 krusader version:     1.51
@@ -737,13 +737,13 @@ Good - your configure finished. Start make now
 
 <para
 >If you dit use the an other --prefix= than <filename
->$KDEDIR or /usr/local</filename
+>$TDEDIR or /usr/local</filename
 > , then it can't hurt to do an extra check: <screen
 ><prompt>$</prompt> <userinput><command>kde-config</command> <option>--path exe</option></userinput>
 /home/frank/.kde/bin/:/usr/bin/:/usr/local/bin/   
 <prompt>$</prompt></screen
 > If the &lt;prefix_dir/bin&gt; directory is not shown, you need to use e.g. <command
->export KDEDIRS=/usr/local:/usr</command
+>export TDEDIRS=/usr/local:/usr</command
 >. To make these settings permanent you can &eg; append this export command to your <filename
 >/etc/profile</filename
 > file. Than you need to restart &kde;, and check again. </para>
diff --git a/doc/ru/konfigurator.docbook b/doc/ru/konfigurator.docbook
index 7523a8b..ed5c369 100644
--- a/doc/ru/konfigurator.docbook
+++ b/doc/ru/konfigurator.docbook
@@ -964,7 +964,7 @@ HTML_PARSING-->
 > <guibutton
 >Export Color Scheme</guibutton
 > buttons you can load and save a Color Scheme profile. This allows that &krusader; can have the &tcmd;, &mc;, foo-commander or your custom colors. The Color Schemes are stored in <filename
->$KDEDIR/share/apps/krusader</filename
+>$TDEDIR/share/apps/krusader</filename
 >, the <filename
 >foo.color</filename
 > is a binary file that holds the Color Scheme.</para>
diff --git a/krusader/Dialogs/krkeydialog.cpp b/krusader/Dialogs/krkeydialog.cpp
index 0adaf7b..24e5e61 100644
--- a/krusader/Dialogs/krkeydialog.cpp
+++ b/krusader/Dialogs/krkeydialog.cpp
@@ -58,7 +58,7 @@ KrKeyDialog::~KrKeyDialog() {
 }
 
 void KrKeyDialog::slotImportShortcuts() {
-   // find $KDEDIR/share/apps/krusader
+   // find $TDEDIR/share/apps/krusader
    TQString basedir = KGlobal::dirs()->findResourceDir("appdata", "total_commander.keymap");
    // let the user select a file to load
    TQString filename = KFileDialog::getOpenFileName(basedir, i18n(FILE_FILTER), 0, i18n("Select a keymap file"));
diff --git a/krusader/Konfigurator/kgcolors.cpp b/krusader/Konfigurator/kgcolors.cpp
index 21498a2..01e4a7e 100644
--- a/krusader/Konfigurator/kgcolors.cpp
+++ b/krusader/Konfigurator/kgcolors.cpp
@@ -498,7 +498,7 @@ bool KgColors::apply()
 }
 
 void KgColors::slotImportColors() {
-	// find $KDEDIR/share/apps/krusader
+	// find $TDEDIR/share/apps/krusader
 	TQString basedir = KGlobal::dirs()->findResourceDir("appdata", "total_commander.keymap");
 	// let the user select a file to load
 	TQString file = KFileDialog::getOpenFileName(basedir, "*.color", 0, i18n("Select a color-scheme file"));