Drop automake build support.

Add basic build instructions.
Rework of the README, INSTALL and help page.
Remove empty folder templates and the NEWS file.
Delete the INSTALL.debian and INSTALL.gentoo files.
Create the doc/misc folder to hold lot of config
and/or readme files.

Signed-off-by: gregory guy <[email protected]>

1 files changed, 0 insertions, 82 deletions

diff --git a/doc/pptp.txt b/doc/pptp.txt
deleted file mode 100644
index 24bdc2f..0000000
--- a/doc/pptp.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-requirements:
-- mppe patched kernel (http://www.polbox.com/h/hs001/)
-- pptp client (http://pptpclient.sourceforge.net/)
-
-
-needed for connection:
-- IP address or hostname
-- dns
-	- automatic (usepeerdns)
-	- name servers (ip)
-- authentication domain name 
-- authentication
-	- no (noauth)
-	- yes 
-- username
-- password
-- encryption
-	- refuse 40 bit encr (nomppe-40)
-	- refuse 128 bit encr (nomppe-128)
-	- require stateless encr (mppe-stateful)
-	- require mppe (require-mppe)
-		- requires ppp-compress-18 (ppp_mppe)
-	- refuse eap (refuse-eap)
-
-optional:
-- debug (debug dump)
-- reconnect on disconnect (persist)
-
-
-options:
-
-       mppe-stateful
-              Allow  MPPE  to  use  stateful  mode.   Stateless  mode is still
-              attempted first.  The default is to disallow stateful mode.
-       nomppe Disables MPPE (Microsoft Point to Point  Encryption).   This  is
-              the default.
-
-       nomppe-40
-              Disable 40-bit encryption with MPPE.
-
-       nomppe-128
-              Disable 128-bit encryption with MPPE.
-
-       nomppe-stateful
-              Disable MPPE stateful mode.  This is the default.
-
-       refuse-mschap
-              With this option, pppd will not agree to authenticate itself  to
-              the peer using MS-CHAP.
-
-       refuse-mschap-v2
-              With  this option, pppd will not agree to authenticate itself to
-              the peer using MS-CHAPv2.
-       require-mppe
-              Require  the  use of MPPE (Microsoft Point to Point Encryption).
-              This option disables all other compression types.   This  option
-              enables  both  40-bit and 128-bit encryption.  In order for MPPE
-              to successfully come up, you must have authenticated with either
-              MS-CHAP  or  MS-CHAPv2.  This option is presently only supported
-              under Linux, and only if your  kernel  has  been  configured  to
-              include MPPE support.
-
-       require-mppe-40
-              Require the use of MPPE, with 40-bit encryption.
-
-       require-mppe-128
-              Require the use of MPPE, with 128-bit encryption.
-
-       require-mschap
-              Require the peer to authenticate itself using MS-CHAP [Microsoft
-              Challenge Handshake Authentication Protocol] authentication.
-
-       require-mschap-v2
-              Require  the  peer  to  authenticate  itself   using   MS-CHAPv2
-              [Microsoft  Challenge Handshake Authentication Protocol, Version
-              2] authentication.
-
-       require-eap
-              Require the peer to authenticate itself  using  EAP  [Extensible
-              Authentication Protocol] authentication.
-
-