Fix KDE -> TDE branding.

3 files changed, 338 insertions, 338 deletions

diff --git a/tde-i18n-nn/messages/tdelibs/kio.po b/tde-i18n-nn/messages/tdelibs/kio.po
index ff4c941ee1b..30d6b24613b 100644
--- a/tde-i18n-nn/messages/tdelibs/kio.po
+++ b/tde-i18n-nn/messages/tdelibs/kio.po
@@ -397,11 +397,11 @@ msgstr ""
 
 #: kio/tcpslavebase.cpp:1008
 msgid ""
-"SSL certificate is being rejected as requested. You can disable this in the KDE "
+"SSL certificate is being rejected as requested. You can disable this in the TDE "
 "Control Center."
 msgstr ""
 "SSL-sertifikatet vert nekta. Du kan endra innstillingane i "
-"KDE-kontrollsenteret."
+"TDE-kontrollsenteret."
 
 #: kio/tcpslavebase.cpp:1020
 msgid "Co&nnect"
@@ -1200,19 +1200,19 @@ msgstr ""
 
 #: kio/global.cpp:586
 msgid ""
-"When all else fails, please consider helping the KDE team or the third party "
+"When all else fails, please consider helping the TDE team or the third party "
 "maintainer of this software by submitting a high quality bug report. If the "
 "software is provided by a third party, please contact them directly. Otherwise, "
 "first look to see if the same bug has been submitted by someone else by "
-"searching at the <a href=\"http://bugs.kde.org/\">KDE bug reporting website</a>"
+"searching at the <a href=\"http://bugs.kde.org/\">TDE bug reporting website</a>"
 ". If not, take note of the details given above, and include them in your bug "
 "report, along with as many other details as you think might help."
 msgstr ""
-"Dersom alt anna mislukkast, kan du hjelpa KDE eller dei som har laga programmet "
-"ved å senda inn ein god feilrapport. Dersom programmet kjem frå andre enn KDE, "
+"Dersom alt anna mislukkast, kan du hjelpa TDE eller dei som har laga programmet "
+"ved å senda inn ein god feilrapport. Dersom programmet kjem frå andre enn TDE, "
 "ta kontakt direkte med produsenten. Viss ikkje, kan du sjå om den same feilen "
 "alt er rapportert av andre ved å søkja på <a href=\"http://bugs.kde.org/\">"
-"KDE-nettstaden for feilrapportering</a>. Dersom feilen ikkje er rapportert, bør "
+"TDE-nettstaden for feilrapportering</a>. Dersom feilen ikkje er rapportert, bør "
 "du notera alle opplysningane over og ta dei med i feilrapporten saman med alle "
 "andre detaljar du trur kan hjelpa."
 
@@ -1310,11 +1310,11 @@ msgstr ""
 #: kio/global.cpp:637
 msgid ""
 "The program which provides compatibility with this protocol may not have been "
-"updated with your last update of KDE. This can cause the program to be "
+"updated with your last update of TDE. This can cause the program to be "
 "incompatible with the current version and thus not start."
 msgstr ""
 "Programmet som gjev kompatibilitet med denne protokollen vart kanskje ikkje "
-"oppdatert då du sist oppdaterte KDE. I så fall kan det henda programmet ikkje "
+"oppdatert då du sist oppdaterte TDE. I så fall kan det henda programmet ikkje "
 "startar fordi det er inkompatibelt med denne versjonen."
 
 #: kio/global.cpp:645
@@ -1353,10 +1353,10 @@ msgstr "Protokollen %1 er ikkje støtta"
 
 #: kio/global.cpp:665
 msgid ""
-"The protocol <strong>%1</strong> is not supported by the KDE programs currently "
+"The protocol <strong>%1</strong> is not supported by the TDE programs currently "
 "installed on this computer."
 msgstr ""
-"Protokollen <strong>%1</strong> er ikkje støtta av KDE-programma som er "
+"Protokollen <strong>%1</strong> er ikkje støtta av TDE-programma som er "
 "installerte på denne maskina."
 
 #: kio/global.cpp:668
@@ -1373,12 +1373,12 @@ msgstr ""
 
 #: kio/global.cpp:671
 msgid ""
-"You may perform a search on the Internet for a KDE program (called a kioslave "
+"You may perform a search on the Internet for a TDE program (called a kioslave "
 "or ioslave) which supports this protocol. Places to search include <a "
 "href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
 "and <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
 msgstr ""
-"Du kan utføra eit søk på Internett etter eit KDE-program (kalla ein kioslave "
+"Du kan utføra eit søk på Internett etter eit TDE-program (kalla ein kioslave "
 "eller ioslave) som støttar denne protokollen. Aktuelle nettstadar er mellom "
 "anna <a href=\"http://kde-apps.org/\">http://kde-apps.org/</a> "
 "og <a href=\"http://freshmeat.net/\">http://freshmeat.net/</a>."
@@ -1399,12 +1399,12 @@ msgstr "Adressa (URL-en) du oppgav refererer ikkje til nokon ressurs."
 
 #: kio/global.cpp:685
 msgid ""
-"KDE is able to communicate through a protocol within a protocol; the protocol "
+"TDE is able to communicate through a protocol within a protocol; the protocol "
 "specified is only for use in such situations, however this is not one of these "
 "situations. This is a rare event, and is likely to indicate a programming "
 "error."
 msgstr ""
-"KDE kan kommunisera gjennom ein protokoll inni ein protokoll. Den spesifiserte "
+"TDE kan kommunisera gjennom ein protokoll inni ein protokoll. Den spesifiserte "
 "protokollen er berre for slike tilfelle, medan dette ikkje er eit slikt "
 "tilfelle. Denne hendinga er sjeldan, og skuldast sannsynlegvis ein "
 "programmeringsfeil."
@@ -1416,20 +1416,20 @@ msgstr "Ustøtta handling: %1"
 
 #: kio/global.cpp:694
 msgid ""
-"The requested action is not supported by the KDE program which is implementing "
+"The requested action is not supported by the TDE program which is implementing "
 "the <strong>%1</strong> protocol."
 msgstr ""
-"Den førespurde handlinga er ikkje støtta av KDE-programmet som implementerer "
+"Den førespurde handlinga er ikkje støtta av TDE-programmet som implementerer "
 "<strong>%1</strong>-protokollen."
 
 #: kio/global.cpp:697
 msgid ""
-"This error is very much dependent on the KDE program. The additional "
-"information should give you more information than is available to the KDE "
+"This error is very much dependent on the TDE program. The additional "
+"information should give you more information than is available to the TDE "
 "input/output architecture."
 msgstr ""
-"Denne feilen er i stor grad avhengig av KDE-programmet. Ekstrainformasjonen bør "
-"gje deg meir informasjon enn du kan få gjennom inn/ut-arkitekturen i KDE."
+"Denne feilen er i stor grad avhengig av TDE-programmet. Ekstrainformasjonen bør "
+"gje deg meir informasjon enn du kan få gjennom inn/ut-arkitekturen i TDE."
 
 #: kio/global.cpp:700
 msgid "Attempt to find another way to accomplish the same outcome."
@@ -1582,10 +1582,10 @@ msgstr "Protokollen %1 er ikkje noko filsystem"
 #: kio/global.cpp:792
 msgid ""
 "This means that a request was made which requires determining the contents of "
-"the folder, and the KDE program supporting this protocol is unable to do so."
+"the folder, and the TDE program supporting this protocol is unable to do so."
 msgstr ""
 "Dette tyder at førespurnaden ikkje klarte å avgjera innhaldet i mappa fordi "
-"KDE-programmet som støttar protokollen ikkje klarar det."
+"TDE-programmet som støttar protokollen ikkje klarar det."
 
 #: kio/global.cpp:800
 msgid "Cyclic Link Detected"
@@ -1594,12 +1594,12 @@ msgstr "Syklisk lenkje oppdaga"
 #: kio/global.cpp:801
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. KDE detected a link or series of links that results in an "
+"and/or location. TDE detected a link or series of links that results in an "
 "infinite loop - i.e. the file was (perhaps in a roundabout way) linked to "
 "itself."
 msgstr ""
 "UNIX-miljø kan vanlegvis lenkja filer eller mapper til andre namn og/eller "
-"plasseringar. KDE oppdaga ei lenkje eller ei lenkjefølgje som går i uendeleg "
+"plasseringar. TDE oppdaga ei lenkje eller ei lenkjefølgje som går i uendeleg "
 "løkkje. Fila er altså (kanskje via omvegar) ei lenkje til seg sjølv."
 
 #: kio/global.cpp:805 kio/global.cpp:827
@@ -1629,12 +1629,12 @@ msgstr "Syklisk lenkje oppdaga under kopiering"
 #: kio/global.cpp:822
 msgid ""
 "UNIX environments are commonly able to link a file or folder to a separate name "
-"and/or location. During the requested copy operation, KDE detected a link or "
+"and/or location. During the requested copy operation, TDE detected a link or "
 "series of links that results in an infinite loop - i.e. the file was (perhaps "
 "in a roundabout way) linked to itself."
 msgstr ""
 "UNIX-miljø kan vanlegvis lenkja filer eller mapper til andre namn og/eller "
-"plasseringar. I løpet av kopieringsoperasjonen oppdaga KDE ei lenkje eller ei "
+"plasseringar. I løpet av kopieringsoperasjonen oppdaga TDE ei lenkje eller ei "
 "lenkjefølgje som går i uendeleg løkkje. Fila er altså (kanskje via omvegar) ei "
 "lenkje til seg sjølv."
 
@@ -1735,12 +1735,12 @@ msgstr ""
 
 #: kio/global.cpp:873
 msgid ""
-"KDE is able to communicate through a protocol within a protocol. This request "
+"TDE is able to communicate through a protocol within a protocol. This request "
 "specified a protocol be used as such, however this protocol is not capable of "
 "such an action. This is a rare event, and is likely to indicate a programming "
 "error."
 msgstr ""
-"KDE kan kommunisera gjennom ein protokoll inni ein annan protokoll. Denne "
+"TDE kan kommunisera gjennom ein protokoll inni ein annan protokoll. Denne "
 "førespurnaden spesifiserte slik kommunikasjon, men denne protokollen kan ikkje "
 "kommunisera på den måten. Dette skjer sjeldan, og skuldast vanlegvis "
 "programmeringsfeil."
@@ -2081,16 +2081,16 @@ msgstr "Feil ved autentisering, Metoden %1 er ikkje støtta"
 msgid ""
 "Although you may have supplied the correct authentication details, the "
 "authentication failed because the method that the server is using is not "
-"supported by the KDE program implementing the protocol %1."
+"supported by the TDE program implementing the protocol %1."
 msgstr ""
 "Sjølv om du kan ha oppgjeve rette autentiseringsdetaljar, kan autentiseringa ha "
-"mislukkast fordi metoden som tenaren brukar ikkje er støtta av KDE-programmet "
+"mislukkast fordi metoden som tenaren brukar ikkje er støtta av TDE-programmet "
 "som implementerer protokollen %1."
 
 #: kio/global.cpp:1101
 msgid ""
 "Please file a bug at <a href=\"http://bugs.kde.org/\">http://bugs.kde.org/</a> "
-"to inform the KDE team of the unsupported authentication method."
+"to inform the TDE team of the unsupported authentication method."
 msgstr ""
 "Rapporter gjerne ein feil på <a href=\"http://bugs.kde.org/\">"
 "http://bugs.kde.org/</a> for å melda frå til utviklarane av "
@@ -2144,7 +2144,7 @@ msgid ""
 "<li>Timeout for establishing a connection: %1 seconds</li>"
 "<li>Timeout for receiving a response: %2 seconds</li>"
 "<li>Timeout for accessing proxy servers: %3 seconds</li></ul>"
-"Please note that you can alter these timeout settings in the KDE Control "
+"Please note that you can alter these timeout settings in the TDE Control "
 "Center, by selecting Network -> Preferences."
 msgstr ""
 "Sjølv om det vart oppretta kontakt med tenaren, kom det ikkje noko svar innan "
@@ -2153,7 +2153,7 @@ msgstr ""
 "<li>Tidsgrense for oppretting av samband: %1 sekund</li> "
 "<li>Tidsgrense for mottak av svar: %2 sekund</li> "
 "<li>Tidsgrense for tilgang til mellomtenarar: %3 sekund</li></ul> "
-"Hugs at du kan endra desse tidsgrensene i KDE-kontrollsenteret, ved å velja "
+"Hugs at du kan endra desse tidsgrensene i TDE-kontrollsenteret, ved å velja "
 "Nettverk ->Innstillingar."
 
 #: kio/global.cpp:1140
@@ -2472,8 +2472,8 @@ msgid "&Edit..."
 msgstr "&Rediger …"
 
 #: kio/kmimetypechooser.cpp:104
-msgid "Click this button to display the familiar KDE mime type editor."
-msgstr "Bruk denne knappen for å redigera MIME-typar i KDE."
+msgid "Click this button to display the familiar TDE mime type editor."
+msgstr "Bruk denne knappen for å redigera MIME-typar i TDE."
 
 #: kssl/ksslcertdlg.cc:61
 msgid "Certificate"
@@ -2492,8 +2492,8 @@ msgid "Do not send a certificate"
 msgstr "Send ikkje sertifikat"
 
 #: kssl/ksslcertdlg.cc:84
-msgid "KDE SSL Certificate Dialog"
-msgstr "KDE SSL-sertifikatdialog"
+msgid "TDE SSL Certificate Dialog"
+msgstr "TDE SSL-sertifikatdialog"
 
 #: kssl/ksslcertdlg.cc:139
 msgid ""
@@ -2614,24 +2614,24 @@ msgid "GMT"
 msgstr "GMT"
 
 #: kssl/ksslkeygen.cc:48
-msgid "KDE Certificate Request"
-msgstr "KDE-sertifikatførespurnad"
+msgid "TDE Certificate Request"
+msgstr "TDE-sertifikatførespurnad"
 
 #: kssl/ksslkeygen.cc:50
-msgid "KDE Certificate Request - Password"
-msgstr "KDE-sertifikatpassord"
+msgid "TDE Certificate Request - Password"
+msgstr "TDE-sertifikatpassord"
 
 #: kssl/ksslkeygen.cc:93
 msgid "Unsupported key size."
 msgstr "Ustøtta nøkkelstorleik."
 
 #: kssl/ksslinfodlg.cc:120 kssl/ksslkeygen.cc:93
-msgid "KDE SSL Information"
-msgstr "KDE SSL-informasjon"
+msgid "TDE SSL Information"
+msgstr "TDE SSL-informasjon"
 
 #: kssl/ksslkeygen.cc:97 misc/uiserver.cpp:1383
-msgid "KDE"
-msgstr "KDE"
+msgid "TDE"
+msgstr "TDE"
 
 #: kssl/ksslkeygen.cc:97
 msgid "Please wait while the encryption keys are generated..."
@@ -2682,8 +2682,8 @@ msgid "Current connection is not secured with SSL."
 msgstr "Sambandet er ikkje sikra med SSL."
 
 #: kssl/ksslinfodlg.cc:99
-msgid "SSL support is not available in this build of KDE."
-msgstr "SSL-støtte er ikkje tilgjengeleg i denne KDE-utgåva."
+msgid "SSL support is not available in this build of TDE."
+msgstr "SSL-støtte er ikkje tilgjengeleg i denne TDE-utgåva."
 
 #: kssl/ksslinfodlg.cc:109
 msgid "C&ryptography Configuration..."
@@ -2878,9 +2878,9 @@ msgstr ""
 
 #: misc/kfile/fileprops.cpp:240
 msgid ""
-"Opens a KDE properties dialog to allow viewing and modifying of metadata of the "
+"Opens a TDE properties dialog to allow viewing and modifying of metadata of the "
 "given file(s)"
-msgstr "Opnar ein KDE-dialog der du kan sjå og endra metadata for fila/filene."
+msgstr "Opnar ein TDE-dialog der du kan sjå og endra metadata for fila/filene."
 
 #: misc/kfile/fileprops.cpp:244
 msgid ""
@@ -2931,10 +2931,10 @@ msgstr "Kan ikkje avgjera metadata"
 
 #: misc/kwalletd/kwalletd.cpp:400
 msgid ""
-"<qt>KDE has requested to open the wallet '<b>%1</b>'. Please enter the password "
+"<qt>TDE has requested to open the wallet '<b>%1</b>'. Please enter the password "
 "for this wallet below."
 msgstr ""
-"<qt>KDE har bede om å få opna lommeboka «<b>%1</b>». Oppgje eit passord for "
+"<qt>TDE har bede om å få opna lommeboka «<b>%1</b>». Oppgje eit passord for "
 "denne lommeboka nedanfor."
 
 #: misc/kwalletd/kwalletd.cpp:402
@@ -2952,31 +2952,31 @@ msgstr "&Opna"
 
 #: misc/kwalletd/kwalletd.cpp:414
 msgid ""
-"KDE has requested to open the wallet. This is used to store sensitive data in a "
+"TDE has requested to open the wallet. This is used to store sensitive data in a "
 "secure fashion. Please enter a password to use with this wallet or click cancel "
 "to deny the application's request."
 msgstr ""
-"KDE har bede om å få opna lommeboka. Denne vert bruka til å lagra følsomme data "
+"TDE har bede om å få opna lommeboka. Denne vert bruka til å lagra følsomme data "
 "på ein trygg måte. Oppgje eit passord for denne lommeboka eller trykk «Avbryt» "
 "for å nekta applikasjonen tilgang."
 
 #: misc/kwalletd/kwalletd.cpp:416
 msgid ""
-"<qt>The application '<b>%1</b>' has requested to open the KDE wallet. This is "
+"<qt>The application '<b>%1</b>' has requested to open the TDE wallet. This is "
 "used to store sensitive data in a secure fashion. Please enter a password to "
 "use with this wallet or click cancel to deny the application's request."
 msgstr ""
-"<qt>Programmet «<b>%1</b>» har bede om å få opna KDE-lommeboka. Denne vert "
+"<qt>Programmet «<b>%1</b>» har bede om å få opna TDE-lommeboka. Denne vert "
 "bruka til å lagra følsomme data på ein trygg måte. Oppgje eit passord for denne "
 "lommeboka eller trykk «Avbryt» for å nekta applikasjonen tilgang."
 
 #: misc/kwalletd/kwalletd.cpp:423
 msgid ""
-"<qt>KDE has requested to create a new wallet named '<b>%1</b>"
+"<qt>TDE has requested to create a new wallet named '<b>%1</b>"
 "'. Please choose a password for this wallet, or cancel to deny the "
 "application's request."
 msgstr ""
-"<qt>KDE har bedt om å få laga ei ny lommebok med namnet «<b>%1</b>"
+"<qt>TDE har bedt om å få laga ei ny lommebok med namnet «<b>%1</b>"
 "». Vel eit passord for denne lommeboka, eller avbryt for å nekta førespurnaden."
 
 #: misc/kwalletd/kwalletd.cpp:425
@@ -2996,8 +2996,8 @@ msgstr "&Lag"
 #: misc/kwalletd/kwalletd.cpp:432 misc/kwalletd/kwalletd.cpp:607
 #: misc/kwalletd/kwalletd.cpp:623 misc/kwalletd/kwalletd.cpp:634
 #: misc/kwalletd/kwalletd.cpp:639 misc/kwalletd/kwalletd.cpp:1157
-msgid "KDE Wallet Service"
-msgstr "KDE Lommebok-teneste"
+msgid "TDE Wallet Service"
+msgstr "TDE Lommebok-teneste"
 
 #: misc/kwalletd/kwalletd.cpp:444
 msgid ""
@@ -3008,8 +3008,8 @@ msgstr ""
 "<br>(Feilkode %2: %3)"
 
 #: misc/kwalletd/kwalletd.cpp:518
-msgid "<qt>KDE has requested access to the open wallet '<b>%1</b>'."
-msgstr "<qt>KDE har bede om tilgang til den opne lommeboka «<b>%1</b>»."
+msgid "<qt>TDE has requested access to the open wallet '<b>%1</b>'."
+msgstr "<qt>TDE har bede om tilgang til den opne lommeboka «<b>%1</b>»."
 
 #: misc/kwalletd/kwalletd.cpp:520
 msgid ""
@@ -3220,8 +3220,8 @@ msgid ""
 msgstr " Tid att: %1 "
 
 #: misc/uiserver.cpp:1384
-msgid "KDE Progress Information UI Server"
-msgstr "KDE UI-tenar for framgangsinfo"
+msgid "TDE Progress Information UI Server"
+msgstr "TDE UI-tenar for framgangsinfo"
 
 #: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388
 msgid "Developer"
@@ -4114,7 +4114,7 @@ msgid ""
 "already exist). This extension is based on the file type that you have chosen "
 "to save in."
 "<br>"
-"<br>If you do not want KDE to supply an extension for the filename, you can "
+"<br>If you do not want TDE to supply an extension for the filename, you can "
 "either turn this option off or you can suppress it by adding a period (.) to "
 "the end of the filename (the period will be automatically removed).</li></ol>"
 "If unsure, keep this option enabled as it makes your files more manageable."
@@ -4131,7 +4131,7 @@ msgstr ""
 "når du trykkjer <b>Lagra</b>, så blir %3 lagt til slutten av filnamnet (viss "
 "filnamnet ikkje finst frå før). Dette etternamnet er basert på den filtypen du "
 "har valt som lagringstype. "
-"<br> <b> Viss du ikkje vil at KDE skal setja på eit etternamn for filnamnet, så "
+"<br> <b> Viss du ikkje vil at TDE skal setja på eit etternamn for filnamnet, så "
 "kan du anten slå av dette valet, eller undertrykkja det ved å leggja til eit "
 "punktum (.) til filnamnet (punktumet blir automatisk fjerna).</li></ol> "
 "Viss du ikkje er sikker, så la valet vera på, fordi det gjer det lettare å "
@@ -4142,13 +4142,13 @@ msgid ""
 "<qt>This button allows you to bookmark specific locations. Click on this button "
 "to open the bookmark menu where you may add, edit or select a bookmark."
 "<p>These bookmarks are specific to the file dialog, but otherwise operate like "
-"bookmarks elsewhere in KDE.</qt>"
+"bookmarks elsewhere in TDE.</qt>"
 msgstr ""
 "<qt>Med denne knappen kan du setja bokmerke på visse adresser. Dersom du "
 "trykkjer på knappen, får du sjå ein bokmerkemeny der du kan leggja til, endra "
 "eller velja eit bokmerke. "
 "<p>Desse bokmerka gjeld berre for fildialogen, men fungerer elles som vanlege "
-"KDE-bokmerke.</qt>"
+"TDE-bokmerke.</qt>"
 
 #: kfile/kfileiconview.cpp:62
 msgid "Small Icons"
@@ -5150,8 +5150,8 @@ msgstr ""
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 16
 #: rc.cpp:15
 #, no-c-format
-msgid "KDE Wallet Wizard"
-msgstr "Vegvisar for KDE-lommebok"
+msgid "TDE Wallet Wizard"
+msgstr "Vegvisar for TDE-lommebok"
 
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 23
 #: rc.cpp:18
@@ -5162,19 +5162,19 @@ msgstr "Introduksjon"
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 56
 #: rc.cpp:21
 #, no-c-format
-msgid "<u>KWallet</u> - The KDE Wallet System"
-msgstr "<u>KWallet</u> – KDE sitt lommebok-system"
+msgid "<u>KWallet</u> - The TDE Wallet System"
+msgstr "<u>KWallet</u> – TDE sitt lommebok-system"
 
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 81
 #: rc.cpp:24
 #, no-c-format
 msgid ""
-"Welcome to KWallet, the KDE Wallet System.  KWallet allows you to store your "
+"Welcome to KWallet, the TDE Wallet System.  KWallet allows you to store your "
 "passwords and other personal information on disk in an encrypted file, "
 "preventing others from viewing the information.  This wizard will tell you "
 "about KWallet and help you configure it for the first time."
 msgstr ""
-"Dette er KWallet – KDE sitt lommeboksystem. Med KWallet kan du lagra passorda "
+"Dette er KWallet – TDE sitt lommeboksystem. Med KWallet kan du lagra passorda "
 "dine og andre personlege opplysningar på disken i ei kryptert fil. Slik unngår "
 "du at andre kan sjå denne informasjonen (heller ikkje «root» kan lesa det). "
 "Denne vegvisaren gjev deg informasjon om KWallet og hjelper deg å setja opp "
@@ -5196,7 +5196,7 @@ msgstr "&Avanserte innstillingar"
 #: rc.cpp:36
 #, no-c-format
 msgid ""
-"The KDE Wallet system stores your data in a <i>wallet</i> "
+"The TDE Wallet system stores your data in a <i>wallet</i> "
 "file on your local hard disk.  The data is only written in encrypted form, "
 "presently using the blowfish algorithm with your password as the key.  When a "
 "wallet is opened, the wallet manager application will launch and display an "
@@ -5222,7 +5222,7 @@ msgstr "Passordval"
 #: rc.cpp:42
 #, no-c-format
 msgid ""
-"Various applications may attempt to use the KDE wallet to store passwords or "
+"Various applications may attempt to use the TDE wallet to store passwords or "
 "other information such as web form data and cookies.  If you would like these "
 "applications to use the wallet, you must enable it now and choose a password.  "
 "The password you choose <i>cannot</i> be recovered if it is lost, and will "
@@ -5251,8 +5251,8 @@ msgstr "Stadfest passordet:"
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 301
 #: rc.cpp:51
 #, no-c-format
-msgid "Yes, I wish to use the KDE wallet to store my personal information."
-msgstr "Ja, eg vil bruka KDE-lommeboka til å lagra personlege opplysingar."
+msgid "Yes, I wish to use the TDE wallet to store my personal information."
+msgstr "Ja, eg vil bruka TDE-lommeboka til å lagra personlege opplysingar."
 
 #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 390
 #: rc.cpp:54
@@ -5264,12 +5264,12 @@ msgstr "Tryggleiksklasse"
 #: rc.cpp:57
 #, no-c-format
 msgid ""
-"The KDE Wallet system allows you to control the level of security of your "
+"The TDE Wallet system allows you to control the level of security of your "
 "personal data.  Some of these settings do impact usability.  While the default "
 "settings are generally acceptable for most users, you may wish to change some "
 "of them.  You may further tune these settings from the KWallet control module."
 msgstr ""
-"Med KDE sitt lommeboksystem kan du avgjera tryggleiksklassa for dine personlege "
+"Med TDE sitt lommeboksystem kan du avgjera tryggleiksklassa for dine personlege "
 "opplysingar.  Nokre av desse innstillingane gjer systemet litt vanskelegare å "
 "bruka.  Standard-innstillingane er vanlegvis akseptable for dei fleste "
 "brukarar, men det kan vera at du vil endra nokre av dei. Du kan justera "
@@ -6012,8 +6012,8 @@ msgstr "Klarte ikkje lesa %1"
 
 #: ../kioslave/http/http_cache_cleaner.cpp:53
 #: ../kioslave/http/http_cache_cleaner.cpp:194
-msgid "KDE HTTP cache maintenance tool"
-msgstr "KDE vedlikehaldsverktøy for HTTP-mellomlager"
+msgid "TDE HTTP cache maintenance tool"
+msgstr "TDE vedlikehaldsverktøy for HTTP-mellomlager"
 
 #: ../kioslave/http/http_cache_cleaner.cpp:59
 msgid "Empty the cache"
diff --git a/tde-i18n-nn/messages/tdelibs/tdelibs.po b/tde-i18n-nn/messages/tdelibs/tdelibs.po
index eb82877ade3..86675987eb1 100644
--- a/tde-i18n-nn/messages/tdelibs/tdelibs.po
+++ b/tde-i18n-nn/messages/tdelibs/tdelibs.po
@@ -581,10 +581,10 @@ msgstr "Hopp over ord i &store bokstavar"
 #, no-c-format
 msgid ""
 "If checked, words that consist of only uppercase letters are not spell checked. "
-"This is useful if you have a lot of acronyms, such as KDE for example."
+"This is useful if you have a lot of acronyms, such as TDE for example."
 msgstr ""
 "Kryss av for å hindra at ord med berre store bokstavar vert stavekontrollerte. "
-"Dette er nyttig dersom du brukar mange forkortingar, som til dømes «KDE»."
+"Dette er nyttig dersom du brukar mange forkortingar, som til dømes «TDE»."
 
 #. i18n: file ./kspell2/ui/configui.ui line 67
 #: rc.cpp:292
@@ -667,8 +667,8 @@ msgstr "Rekursivt søk etter domene"
 #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 19
 #: rc.cpp:455
 #, no-c-format
-msgid "Removed in KDE 3.5.0"
-msgstr "Fjerna i KDE 3.5.0"
+msgid "Removed in TDE 3.5.0"
+msgstr "Fjerna i TDE 3.5.0"
 
 #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 25
 #: rc.cpp:458
@@ -1613,8 +1613,8 @@ msgid "Unable find script \"%1\"."
 msgstr "Fann ikkje skriptet «%1»."
 
 #: interfaces/kscript/scriptloader.cpp:40
-msgid "KDE Scripts"
-msgstr "KDE-skript"
+msgid "TDE Scripts"
+msgstr "TDE-skript"
 
 #: arts/kde/kvideowidget.cpp:82
 msgid "Video Toolbar"
@@ -2414,20 +2414,20 @@ msgstr "Klarte ikkje markera menyvalet «%1»."
 
 #: kded/kde-menu.cpp:111
 msgid ""
-"KDE Menu query tool.\n"
+"TDE Menu query tool.\n"
 "This tool can be used to find in which menu a specific application is shown.\n"
 "The --highlight option can be used to visually indicate to the user where\n"
-"in the KDE menu a specific application is located."
+"in the TDE menu a specific application is located."
 msgstr ""
-"KDE-menyspørjingsverktøy.\n"
+"TDE-menyspørjingsverktøy.\n"
 "Dette verktøyet kan brukast til å finna den menyen der eit visst program er "
 "vist.\n"
-"Med alternativet --highlight kan du markera visuelt kvar i KDE-menyen\n"
+"Med alternativet --highlight kan du markera visuelt kvar i TDE-menyen\n"
 "programmet ligg."
 
 #: kded/kde-menu.cpp:116
 msgid "kde-menu"
-msgstr "KDE-meny"
+msgstr "TDE-meny"
 
 #: kded/kbuildsycoca.cpp:724 kded/kbuildsycoca.cpp:725 kded/kde-menu.cpp:119
 #: kded/khostname.cpp:362 tdeui/kaboutdialog.cpp:90
@@ -2479,20 +2479,20 @@ msgid "KDontChangeTheHostName"
 msgstr "KDontChangeTheHostName"
 
 #: kded/khostname.cpp:360
-msgid "Informs KDE about a change in hostname"
-msgstr "Gir KDE melding om endringar i vertsnamn"
+msgid "Informs TDE about a change in hostname"
+msgstr "Gir TDE melding om endringar i vertsnamn"
 
 #: kded/kded.cpp:720
 msgid "Check Sycoca database only once"
 msgstr "Berre sjekk Sycoca-database ein gong"
 
 #: kded/kded.cpp:860
-msgid "KDE Daemon"
-msgstr "KDE-nisse"
+msgid "TDE Daemon"
+msgstr "TDE-nisse"
 
 #: kded/kded.cpp:862
-msgid "KDE Daemon - triggers Sycoca database updates when needed"
-msgstr "KDE-nisse – utløyser Sycoca-databaseoppdateringar når det trengst"
+msgid "TDE Daemon - triggers Sycoca database updates when needed"
+msgstr "TDE-nisse – utløyser Sycoca-databaseoppdateringar når det trengst"
 
 #: kded/kbuildsycoca.cpp:483
 msgid ""
@@ -2558,16 +2558,16 @@ msgid "Rebuilds the system configuration cache."
 msgstr "Byggjer systeminformasjonslageret på nytt."
 
 #: kded/kbuildsycoca.cpp:750
-msgid "Reloading KDE configuration, please wait..."
-msgstr "Lastar KDE-oppsettet på nytt, vent litt …"
+msgid "Reloading TDE configuration, please wait..."
+msgstr "Lastar TDE-oppsettet på nytt, vent litt …"
 
 #: kded/kbuildsycoca.cpp:751
-msgid "KDE Configuration Manager"
-msgstr "KDE-oppsettshandterar"
+msgid "TDE Configuration Manager"
+msgstr "TDE-oppsettshandterar"
 
 #: kded/kbuildsycoca.cpp:753
-msgid "Do you want to reload KDE configuration?"
-msgstr "Vil du lasta KDE-oppsettet på nytt?"
+msgid "Do you want to reload TDE configuration?"
+msgstr "Vil du lasta TDE-oppsettet på nytt?"
 
 #: kded/kbuildsycoca.cpp:753
 msgid "Do Not Reload"
@@ -2753,8 +2753,8 @@ msgid "The library %1 does not offer an %2 function."
 msgstr "Biblioteket %1 tilbyr ingen %2-funksjon."
 
 #: tdecore/klibloader.cpp:168
-msgid "The library %1 does not offer a KDE compatible factory."
-msgstr "Biblioteket %1 tilbyr ingen KDE-kompatible fabrikkar."
+msgid "The library %1 does not offer a TDE compatible factory."
+msgstr "Biblioteket %1 tilbyr ingen TDE-kompatible fabrikkar."
 
 #: tdecore/klibloader.cpp:425
 msgid "Library files for \"%1\" not found in paths."
@@ -2769,11 +2769,11 @@ msgstr "LTR"
 
 #: tdecore/kapplication.cpp:1404
 msgid ""
-"There was an error setting up inter-process communications for KDE. The message "
+"There was an error setting up inter-process communications for TDE. The message "
 "returned by the system was:\n"
 "\n"
 msgstr ""
-"Det oppsto feil ved oppsettet av interprosesskommunikasjonen i KDE. Systemet "
+"Det oppsto feil ved oppsettet av interprosesskommunikasjonen i TDE. Systemet "
 "returnerte denne meldinga:\n"
 "\n"
 
@@ -2959,11 +2959,11 @@ msgstr "Klarte ikkje starta hjelpesenteret"
 #: tdecore/kapplication.cpp:2245 tdecore/kapplication.cpp:2280
 #, c-format
 msgid ""
-"Could not launch the KDE Help Center:\n"
+"Could not launch the TDE Help Center:\n"
 "\n"
 "%1"
 msgstr ""
-"Klarte ikkje starta KDE-hjelpa:\n"
+"Klarte ikkje starta TDE-hjelpa:\n"
 "\n"
 "%1"
 
@@ -4205,18 +4205,18 @@ msgstr "Adar II"
 #: tdecore/kaboutdata.cpp:388
 msgid ""
 "_: replace this with information about your translation team\n"
-"<p>KDE is translated into many languages thanks to the work of the translation "
+"<p>TDE is translated into many languages thanks to the work of the translation "
 "teams all over the world.</p>"
-"<p>For more information on KDE internationalization visit <a "
+"<p>For more information on TDE internationalization visit <a "
 "href=\"http://l10n.kde.org\">http://l10n.kde.org</a></p>"
 msgstr ""
-"<p>KDE er omsett til mange språk og var eitt av dei første store programma som "
+"<p>TDE er omsett til mange språk og var eitt av dei første store programma som "
 "fanst på nynorsk. Dersom du vil hjelpa med nynorskomsetjinga eller vil ha meir "
 "informasjon, ta kontakt med Skulelinux.</p>"
 "<p>Du finn fleire norske omsetjingar av fri programvare på nettstaden til "
 "Skulelinux: <a "
 "href=\"http://i18n.skulelinux.no/\">http://i18n.skulelinux.no/</a>.</p>"
-"<p>Du finn meir informasjon om internasjonaliseringa av KDE på <a "
+"<p>Du finn meir informasjon om internasjonaliseringa av TDE på <a "
 "href=\"http://l10n.kde.org/\">http://l10n.kde.org/</a>.</p>"
 
 #: tdecore/kaboutdata.cpp:444
@@ -4297,8 +4297,8 @@ msgid "Code generation options file"
 msgstr "Fil med val for kodegenerering"
 
 #: tdecore/kconfig_compiler/kconfig_compiler.cpp:955
-msgid "KDE .kcfg compiler"
-msgstr "KDE .kcfg-kompilator"
+msgid "TDE .kcfg compiler"
+msgstr "TDE .kcfg-kompilator"
 
 #: tdecore/kconfig_compiler/kconfig_compiler.cpp:956
 msgid "KConfig Compiler"
@@ -5480,30 +5480,30 @@ msgstr "Nedtrekksliste og Automatisk"
 
 #: tdeui/kaboutkde.cpp:34
 msgid ""
-"The <b>K Desktop Environment</b> is written and maintained by the KDE Team, a "
+"The <b>K Desktop Environment</b> is written and maintained by the TDE Team, a "
 "world-wide network of software engineers committed to <a "
 "href=\"http://www.gnu.org/philosophy/free-sw.html\">Free Software</a> "
 "development."
 "<br>"
-"<br>No single group, company or organization controls the KDE source code. "
-"Everyone is welcome to contribute to KDE."
+"<br>No single group, company or organization controls the TDE source code. "
+"Everyone is welcome to contribute to TDE."
 "<br>"
 "<br>Visit <A HREF=\"http://www.kde.org/\">http://www.kde.org</A> "
-"for more information on the KDE project. "
+"for more information on the TDE project. "
 msgstr ""
-"<b>K Desktop Environment</b> er skrive og vedlikehalde av KDE-laget, eit "
+"<b>K Desktop Environment</b> er skrive og vedlikehalde av TDE-laget, eit "
 "verdsfemnande nettverk av programmerarar som driv med utvikling av fri "
 "programvare."
 "<br>"
 "<br>Inga enkel gruppe, firma eller organisasjon kontrollerer kjeldekoden til "
-"KDE. Alle er velkomne til å bidra til KDE."
+"TDE. Alle er velkomne til å bidra til TDE."
 "<br>"
-"<br>Du finn meir informasjon om KDE-prosjektet på <A "
+"<br>Du finn meir informasjon om TDE-prosjektet på <A "
 "HREF=\"http://www.kde.org/\">http://www.kde.org/</A>."
 
 #: tdeui/kaboutkde.cpp:43
 msgid ""
-"Software can always be improved, and the KDE Team is ready to do so. However, "
+"Software can always be improved, and the TDE Team is ready to do so. However, "
 "you - the user - must tell us when something does not work as expected or could "
 "be done better."
 "<br>"
@@ -5515,7 +5515,7 @@ msgid ""
 "bug tracking system to register your wish. Make sure you use the severity "
 "called \"Wishlist\"."
 msgstr ""
-"Ein kan alltid forbetra programvare, og KDE-laget arbeider heile tida for det. "
+"Ein kan alltid forbetra programvare, og TDE-laget arbeider heile tida for det. "
 "Men du – som brukar – må melda frå til oss når noko ikkje verkar slik du "
 "forventar, eller om noko kunne vore gjort betre."
 "<br>"
@@ -5529,7 +5529,7 @@ msgstr ""
 
 #: tdeui/kaboutkde.cpp:54
 msgid ""
-"You do not have to be a software developer to be a member of the KDE team. You "
+"You do not have to be a software developer to be a member of the TDE team. You "
 "can join the national teams that translate program interfaces. You can provide "
 "graphics, themes, sounds, and improved documentation. You decide!"
 "<br>"
@@ -5540,7 +5540,7 @@ msgid ""
 "HREF=\"http://developer.kde.org/\">http://developer.kde.org</A> "
 "will provide you with what you need."
 msgstr ""
-"Du treng ikkje vera programutviklar for å hjelpa til med KDE. Du kan arbeida "
+"Du treng ikkje vera programutviklar for å hjelpa til med TDE. Du kan arbeida "
 "med omsetjingar, laga grafikk, tema, lydar eller betre hjelpetekstar. Her er "
 "noko for alle!"
 "<br>"
@@ -5552,30 +5552,30 @@ msgstr ""
 
 #: tdeui/kaboutkde.cpp:67
 msgid ""
-"KDE is available free of charge, but making it is not free."
+"TDE is available free of charge, but making it is not free."
 "<br>"
-"<br>Thus, the KDE team formed the KDE e.V., a non-profit organization legally "
-"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal "
+"<br>Thus, the TDE team formed the TDE e.V., a non-profit organization legally "
+"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal "
 "and financial matters. See <a href=\"http://www.kde-ev.org/\">"
-"http://www.kde-ev.org</a> for information on the KDE e.V."
+"http://www.kde-ev.org</a> for information on the TDE e.V."
 "<br>"
-"<br>The KDE team does need financial support. Most of the money is used to "
+"<br>The TDE team does need financial support. Most of the money is used to "
 "reimburse members and others on expenses they experienced when contributing to "
-"KDE. You are encouraged to support KDE through a financial donation, using one "
+"TDE. You are encouraged to support TDE through a financial donation, using one "
 "of the ways described at <a href=\"http://www.kde.org/support/\">"
 "http://www.kde.org/support/</a>."
 "<br>"
 "<br>Thank you very much in advance for your support."
 msgstr ""
-"Du får KDE gratis, men det er slett ikkje gratis å laga det. "
+"Du får TDE gratis, men det er slett ikkje gratis å laga det. "
 "<br>"
-"<br>KDE-laget har difor oppretta KDE e.V., ein profittlaus organisasjon "
-"registrert i Tübingen i Tyskland. KDE e.V. representerer KDE-prosjektet i "
+"<br>TDE-laget har difor oppretta TDE e.V., ein profittlaus organisasjon "
+"registrert i Tübingen i Tyskland. TDE e.V. representerer TDE-prosjektet i "
 "juridiske og finansielle saker. På <a href=\"http://www.kde.org/kde-ev/\">"
-"http://www.kde-ev.org/<a> finn du meir informasjon om KDE e.V. "
+"http://www.kde-ev.org/<a> finn du meir informasjon om TDE e.V. "
 "<br>"
-"<br>KDE-laget treng økonomisk støtte. Det meste av pengane går med til å dekkja "
-"utgifter medlemmene våre har ved utviklinga av KDE. På <a "
+"<br>TDE-laget treng økonomisk støtte. Det meste av pengane går med til å dekkja "
+"utgifter medlemmene våre har ved utviklinga av TDE. På <a "
 "href=\"http://www.kde.org/support.html\">http://www.kde.org/support.html</a> "
 "kan du lesa om korleis du kan bidra. "
 "<br>"
@@ -5588,7 +5588,7 @@ msgstr "K Desktop Environment. Utgåve %1"
 
 #: tdeui/kaboutkde.cpp:83
 msgid ""
-"_: About KDE\n"
+"_: About TDE\n"
 "&About"
 msgstr "&Om"
 
@@ -5597,12 +5597,12 @@ msgid "&Report Bugs or Wishes"
 msgstr "&Rapporter feil eller ønskje"
 
 #: tdeui/kaboutkde.cpp:85
-msgid "&Join the KDE Team"
-msgstr "H&jelp til med KDE"
+msgid "&Join the TDE Team"
+msgstr "H&jelp til med TDE"
 
 #: tdeui/kaboutkde.cpp:86
-msgid "&Support KDE"
-msgstr "&Støtt KDE"
+msgid "&Support TDE"
+msgstr "&Støtt TDE"
 
 #: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804
 msgid "&Yes"
@@ -6526,8 +6526,8 @@ msgid "&About %1"
 msgstr "&Om %1"
 
 #: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114
-msgid "About &KDE"
-msgstr "Om &KDE"
+msgid "About &TDE"
+msgstr "Om &TDE"
 
 #: tdeui/kactionclasses.cpp:2072
 msgid "Exit F&ull Screen Mode"
@@ -6654,8 +6654,8 @@ msgid "Task"
 msgstr "Oppgåve"
 
 #: tdeui/kaboutdialog.cpp:704
-msgid "%1 %2 (Using KDE %3)"
-msgstr "%1 %2 (brukar KDE %3)"
+msgid "%1 %2 (Using TDE %3)"
+msgstr "%1 %2 (brukar TDE %3)"
 
 #: tdeui/kaboutdialog.cpp:706
 msgid "%1 %2, %3"
@@ -7403,8 +7403,8 @@ msgstr ""
 "Filvedlegget vart ikkje sendt."
 
 #: khtml/khtml_part.cpp:4870
-msgid "KDE"
-msgstr "KDE"
+msgid "TDE"
+msgstr "TDE"
 
 #: khtml/khtml_part.cpp:5776
 msgid "(%1/s)"
@@ -7799,8 +7799,8 @@ msgid "Archives"
 msgstr "Arkiv"
 
 #: khtml/java/kjavaappletviewer.cpp:451
-msgid "KDE Java Applet Plugin"
-msgstr "KDE-tilleggsprogram for Java-miniprogram"
+msgid "TDE Java Applet Plugin"
+msgstr "TDE-tilleggsprogram for Java-miniprogram"
 
 #: khtml/java/kjavaapplet.cpp:225
 msgid "Initializing Applet \"%1\"..."
@@ -7995,8 +7995,8 @@ msgstr ""
 "klauncher: det vert starta automatisk av tdeinit.\n"
 
 #: kinit/klauncher.cpp:743
-msgid "KDEInit could not launch '%1'."
-msgstr "KDEInit klarte ikkje starta «%1»"
+msgid "TDEInit could not launch '%1'."
+msgstr "TDEInit klarte ikkje starta «%1»"
 
 #: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960
 msgid "Could not find service '%1'."
@@ -8044,8 +8044,8 @@ msgid "KConf Update"
 msgstr "KConf-oppdatering"
 
 #: kconf_update/kconf_update.cpp:945
-msgid "KDE Tool for updating user configuration files"
-msgstr "KDE-verktøy for oppdatering av brukaroppsett"
+msgid "TDE Tool for updating user configuration files"
+msgstr "TDE-verktøy for oppdatering av brukaroppsett"
 
 #: kspell2/ui/configdialog.cpp:38
 msgid "KSpell2 Configuration"
@@ -8080,13 +8080,13 @@ msgid "Web style plugin"
 msgstr "Vevstil-tilleggsmodul"
 
 #: kstyles/klegacy/plugin.cpp:28
-msgid "KDE LegacyStyle plugin"
-msgstr "Programtillegg for gamle KDE-stilar"
+msgid "TDE LegacyStyle plugin"
+msgstr "Programtillegg for gamle TDE-stilar"
 
 #: kstyles/utils/installtheme/main.cpp:35
-msgid "KDE Tool to build a cache list of all pixmap themes installed"
+msgid "TDE Tool to build a cache list of all pixmap themes installed"
 msgstr ""
-"KDE-verktøy for å byggja ei mellomlagra liste over alle bilettemaa som er "
+"TDE-verktøy for å byggja ei mellomlagra liste over alle bilettemaa som er "
 "installerte"
 
 #: kstyles/utils/installtheme/main.cpp:40
@@ -8454,7 +8454,7 @@ msgid ""
 "<br>%1"
 "<p>Possible reasons:</p>"
 "<ul>"
-"<li>An error occurred during your last KDE upgrade leaving an orphaned control "
+"<li>An error occurred during your last TDE upgrade leaving an orphaned control "
 "module"
 "<li>You have old third party modules lying around.</ul>"
 "<p>Check these points carefully and try to remove the module mentioned in the "
@@ -8466,7 +8466,7 @@ msgstr ""
 "<br>%1"
 "<p>Mogelege grunnar:</p>"
 "<ul>"
-"<li>Det oppstod ein feil under din siste KDE-oppgraderinga som etterlot ein "
+"<li>Det oppstod ein feil under din siste TDE-oppgraderinga som etterlot ein "
 "styringsmodul utan tilhøyrsle."
 "<li>Du har gamle tredjeparts-modular liggande.</ul> "
 "<p>Undersøk dette grundig og forsøk å fjerna modulen som er nemnt i "
@@ -8659,8 +8659,8 @@ msgid "kcmkresources"
 msgstr "kcmkresources"
 
 #: kresources/kcmkresources.cpp:45
-msgid "KDE Resources configuration module"
-msgstr "KDE-modul for ressursinnstillingar"
+msgid "TDE Resources configuration module"
+msgstr "TDE-modul for ressursinnstillingar"
 
 #: kresources/kcmkresources.cpp:47
 msgid "(c) 2003 Tobias Koenig"
@@ -8838,24 +8838,24 @@ msgstr "Ikkje nok minne"
 msgid ""
 "Your local kab configuration file \"%1\" could not be created. kab will "
 "probably not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
 "(usually ~/.kde)."
 msgstr ""
 "Klarte ikkje laga den lokale kab-oppsettfila «%1». kab vil truleg ikkje verka "
 "skikkeleg utan ho.\n"
-"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale KDE-katalogen "
+"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale TDE-katalogen "
 "(vanlegvis ~/.kde)."
 
 #: kab/addressbook.cc:461
 msgid ""
 "Your standard kab database file \"%1\" could not be created. kab will probably "
 "not work correctly without it.\n"
-"Make sure you have not removed write permission from your local KDE directory "
+"Make sure you have not removed write permission from your local TDE directory "
 "(usually ~/.kde)."
 msgstr ""
 "Klarte ikkje laga standard-databasefila «%1» for kab. kab vil truleg ikkje "
 "verka skikkeleg utan ho.\n"
-"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale KDE-katalogen "
+"Sjekk at du ikkje har fjerna skriveløyvet frå den lokale TDE-katalogen "
 "(vanlegvis ~/.kde)."
 
 #: kab/addressbook.cc:471
@@ -9160,8 +9160,8 @@ msgid "Import &All"
 msgstr "Importer &alle"
 
 #: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359
-msgid "KDE Secure Certificate Import"
-msgstr "KDE-import av trygge sertifikat"
+msgid "TDE Secure Certificate Import"
+msgstr "TDE-import av trygge sertifikat"
 
 #: kcert/kcertpart.cc:184
 msgid "Chain:"
@@ -9252,8 +9252,8 @@ msgid "Certificate Import"
 msgstr "Sertifikatimport"
 
 #: kcert/kcertpart.cc:455
-msgid "You do not seem to have compiled KDE with SSL support."
-msgstr "Det ser ikkje ut som om KDE er kompilert med SSL-støtte."
+msgid "You do not seem to have compiled TDE with SSL support."
+msgstr "Det ser ikkje ut som om TDE er kompilert med SSL-støtte."
 
 #: kcert/kcertpart.cc:460
 msgid "Certificate file is empty."
@@ -9293,23 +9293,23 @@ msgstr ""
 
 #: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759
 msgid ""
-"Certificate has been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificate has been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
 msgstr ""
-"Sertifikatet er importert til KDE.\n"
-"Du kan tilpassa sertifikatinnstillingane frå KDE-kontrollsenteret."
+"Sertifikatet er importert til TDE.\n"
+"Du kan tilpassa sertifikatinnstillingane frå TDE-kontrollsenteret."
 
 #: kcert/kcertpart.cc:873
 msgid ""
-"Certificates have been successfully imported into KDE.\n"
-"You can manage your certificate settings from the KDE Control Center."
+"Certificates have been successfully imported into TDE.\n"
+"You can manage your certificate settings from the TDE Control Center."
 msgstr ""
-"Sertifikata er importerte til KDE.\n"
-"Du kan tilpassa sertifikatinnstillingane frå KDE-kontrollsenteret."
+"Sertifikata er importerte til TDE.\n"
+"Du kan tilpassa sertifikatinnstillingane frå TDE-kontrollsenteret."
 
 #: kcert/kcertpart.cc:879
-msgid "KDE Certificate Part"
-msgstr "KDE Sertifikatdel"
+msgid "TDE Certificate Part"
+msgstr "TDE Sertifikatdel"
 
 #: khtml/khtml_settings.cc:152
 msgid "Accept"
@@ -9496,12 +9496,12 @@ msgid "expand ${prefix} and ${exec_prefix} in output"
 msgstr "utvid ${prefix} og ${exec_prefix} i resultatteksten"
 
 #: tdecore/tde-config.cpp.in:19
-msgid "Compiled in prefix for KDE libraries"
-msgstr "Innkompilert prefiks for KDE-biblioteka"
+msgid "Compiled in prefix for TDE libraries"
+msgstr "Innkompilert prefiks for TDE-biblioteka"
 
 #: tdecore/tde-config.cpp.in:20
-msgid "Compiled in exec_prefix for KDE libraries"
-msgstr "Innkompilert exec_prefix for KDE-biblioteka"
+msgid "Compiled in exec_prefix for TDE libraries"
+msgstr "Innkompilert exec_prefix for TDE-biblioteka"
 
 #: tdecore/tde-config.cpp.in:21
 msgid "Compiled in library path suffix"
@@ -9512,12 +9512,12 @@ msgid "Prefix in $HOME used to write files"
 msgstr "Prefiks i $HOME bruka til å skriva filer"
 
 #: tdecore/tde-config.cpp.in:23
-msgid "Compiled in version string for KDE libraries"
-msgstr "Innkompilert versjonsstreng for KDE-biblioteka"
+msgid "Compiled in version string for TDE libraries"
+msgstr "Innkompilert versjonsstreng for TDE-biblioteka"
 
 #: tdecore/tde-config.cpp.in:24
-msgid "Available KDE resource types"
-msgstr "Tilgjengelege KDE-ressurstypar"
+msgid "Available TDE resource types"
+msgstr "Tilgjengelege TDE-ressurstypar"
 
 #: tdecore/tde-config.cpp.in:25
 msgid "Search path for resource type"
@@ -9537,7 +9537,7 @@ msgstr "Programmeny (.desktop-filer)"
 
 #: tdecore/tde-config.cpp.in:169
 msgid "CGIs to run from kdehelp"
-msgstr "CGI-ar som skal køyrast frå KDE-hjelp"
+msgstr "CGI-ar som skal køyrast frå TDE-hjelp"
 
 #: tdecore/tde-config.cpp.in:170
 msgid "Configuration files"
diff --git a/tde-i18n-nn/messages/tdelibs/tdeprint.po b/tde-i18n-nn/messages/tdelibs/tdeprint.po
index 2c1ad53924f..64dc670fe3b 100644
--- a/tde-i18n-nn/messages/tdelibs/tdeprint.po
+++ b/tde-i18n-nn/messages/tdelibs/tdeprint.po
@@ -503,13 +503,13 @@ msgstr ""
 msgid ""
 " <qt><b>Printer Selection Menu:</b>  "
 "<p>Use this combo box to select the printer to which you want to print. "
-"Initially (if you run KDEPrint for the first time), you may only find the   <em>"
-"KDE special printers</em> (which save jobs to disk [as PostScript- or "
+"Initially (if you run TDEPrint for the first time), you may only find the   <em>"
+"TDE special printers</em> (which save jobs to disk [as PostScript- or "
 "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
 "a real printer, you need to... "
 "<ul> "
 "<li>...either create a local printer with the help of the <em>"
-"KDE Add Printer Wizard</em>. The Wizard is available for the CUPS and RLPR "
+"TDE Add Printer Wizard</em>. The Wizard is available for the CUPS and RLPR "
 "printing systems (click button to the left of the <em>'Properties'</em> "
 "button),</li> "
 "<li>...or try to connect to an existing remote CUPS print server. You can "
@@ -517,7 +517,7 @@ msgid ""
 "opens: click on the <em>'CUPS server'</em> icon: Fill in the information "
 "required to use the remote server. </li>  </ul> "
 "<p><b>Note:</b> It may happen that you successfully connected to a remote CUPS  "
-"server and still do not get a printer list. If this happens: force KDEPrint to  "
+"server and still do not get a printer list. If this happens: force TDEPrint to  "
 "re-load its configuration files. To reload the configuration files, either "
 "start kprinter again, or use the  switch the print system away from CUPS and "
 "back again once. The print system switch  can be made through a selection in "
@@ -525,19 +525,19 @@ msgid ""
 msgstr ""
 "<qt><b>Skrivarvalmeny:</b> "
 "<p>Bruk denne kombinasjonsboksen for å velja kva skrivar som skal skriva ut. Om "
-"du berre finn <em>KDE spesialskrivarar</em> – som lagrar utskriftsjobbar til "
+"du berre finn <em>TDE spesialskrivarar</em> – som lagrar utskriftsjobbar til "
 "disk (som PostScript- eller PDF-filer), eller leverer jobbar via e-post (som "
 "PDF-vedlegg) – men manglar ein ekte skrivar, må du … "
 "<ul> "
 "<li> … anten laga ein lokal skrivar med hjelp av <em>"
-"KDE-vegvisaren «Legg til skrivar»</em> som er tilgjengeleg for CUPS og RLPR "
+"TDE-vegvisaren «Legg til skrivar»</em> som er tilgjengeleg for CUPS og RLPR "
 "utskriftssystem (trykk knappen til venstre for «Eigenskapar»-knappen), </li> "
 "<li> … eller kan du prøva å kopla til ein ekstern CUPS-skrivartenar ved å "
 "trykkja <em>Systemval …</em> knappen under. Eit nytt vindauge opnar seg: Trykk "
 "på <em>CUPS-tenar</em>-ikonet og fyll inn passande informasjon til ekstern "
 "tenar. </li></ul> "
 "<p><b>Merk:</b> Det kan henda at du ikkje får opp ei skrivarliste sjølv om du "
-"har kopla deg til ein CUPS-tenar. Dersom dette hender, må du tvinga KDEPrint "
+"har kopla deg til ein CUPS-tenar. Dersom dette hender, må du tvinga TDEPrint "
 "til å lasta inn oppsettsfilene på nytt. Då kan du anten starta kprinter på nytt "
 "eller byta til eit anna utskriftssystem enn CUPS og tilbake igjen. Du kan byta "
 "utskriftssystem med nedtrekkslista nedst i dette dialogvindauget når det er "
@@ -563,7 +563,7 @@ msgid ""
 "<p>To create a personal <em>'selective view list'</em>, click on the <em>"
 "'System Options'</em> button at the bottom of this dialog. Then, in the new "
 "dialog, select <em>'Filter'</em> (left column in the <em>"
-"KDE Print Configuration</em> dialog) and setup your selection..</p> "
+"TDE Print Configuration</em> dialog) and setup your selection..</p> "
 "<p><b>Warning:</b> Clicking this button without prior creation of a personal  "
 "<em>'selective view list'</em> will make all printers dissappear from the  "
 "view. (To re-enable all printers, just click this button again.) </p>  </qt>"
@@ -575,23 +575,23 @@ msgstr ""
 "alle</b> skrivarane. </p> "
 "<p>Trykk på <em>«Systemval …</em>»-knappen i botnen av dette vindauget for å "
 "laga ei personleg filtrert liste. I det nye vindauget vel du <em>«Filter»</em> "
-"(venstrekolonne i <em>KDE utskriftsoppsett</em>-dialogen). </p> "
+"(venstrekolonne i <em>TDE utskriftsoppsett</em>-dialogen). </p> "
 "<p><b>Åtvaring:</b> Dersom du klikkar på denne knappen utan først å ha laga ei "
 "personleg <em>filtrert liste</em>, kjem alle skrivarane til å forsvinna frå "
 "visinga. (Trykk på denne knappen igjen for å henta inn att skrivarane.)</p></qt>"
 
 #: kprintdialog.cpp:154
 msgid ""
-"<qt><b>KDE Add Printer Wizard</b> "
-"<p>This button starts the <em>KDE Add Printer Wizard</em>.</p> "
+"<qt><b>TDE Add Printer Wizard</b> "
+"<p>This button starts the <em>TDE Add Printer Wizard</em>.</p> "
 "<p>Use the Wizard (with <em>\"CUPS\"</em> or <em>\"RLPR\"</em>"
 ") to add locally defined printers to your system. </p> "
-"<p><b>Note:</b> The <em>KDE Add Printer Wizard</em> does <b>not</b> "
+"<p><b>Note:</b> The <em>TDE Add Printer Wizard</em> does <b>not</b> "
 "work,  and this button is disabled if you use  <em>\"Generic LPD</em>\", <em>"
 "\"LPRng\"</em>, or <em>\"Print Through  an External Program</em>\".) </p>  </qt>"
 msgstr ""
-"<qt><b>KDE-vegvisar for å leggja til skrivar</b> "
-"<p>Denne knappen startar <em>KDE-vegvisaren for å leggja til skrivar</em>.</p> "
+"<qt><b>TDE-vegvisar for å leggja til skrivar</b> "
+"<p>Denne knappen startar <em>TDE-vegvisaren for å leggja til skrivar</em>.</p> "
 "<p>Du kan bruka denne vegvisaren (med <em>CUPS</em> eller <em>RLPR</em>"
 ") til å leggja til lokale skrivarar på systemet.</p> "
 "<p><b>Merk:</b> Vegvisaren kan <b>ikkje</b> brukast dersom <em>Generell LPD</em>"
@@ -626,31 +626,31 @@ msgid ""
 "<p>This button starts a new dialog where you can adjust various settings of "
 "your printing system. Amongst them: "
 "<ul>"
-"<li> Should KDE applications embed all fonts into the PostScript they generate "
+"<li> Should TDE applications embed all fonts into the PostScript they generate "
 "for printing? "
-"<li> Should KDE use an external PostScript viewer like <em>gv</em> "
+"<li> Should TDE use an external PostScript viewer like <em>gv</em> "
 "for print page previews? "
-"<li> Should KDEPrint use a local or a remote CUPS server?, </ul> "
+"<li> Should TDEPrint use a local or a remote CUPS server?, </ul> "
 "and many more....  </qt>"
 msgstr ""
 " <qt><b>Systemval:</b> "
 "<p>Knappen startar eit nytt vindauge for justering av ulike innstillingar til "
 "utskriftssystemet. Blant dei: "
 "<ul> "
-"<li> Skal KDE-program ta med alle skrifter i PostScript som vert laga ved "
+"<li> Skal TDE-program ta med alle skrifter i PostScript som vert laga ved "
 "utskrift? "
-"<li> Skal KDE bruka ein ekstern PostScript-framvisar som <em>gv</em> "
+"<li> Skal TDE bruka ein ekstern PostScript-framvisar som <em>gv</em> "
 "for førehandsvising? "
-"<li> Skal KDE-utskrift bruka ein lokal eller ekstern CUPS-tenar?, </ul> "
+"<li> Skal TDE-utskrift bruka ein lokal eller ekstern CUPS-tenar?, </ul> "
 "og mykje anna …  </qt>"
 
 #: kprintdialog.cpp:182
 msgid ""
-" <qt><b>Help:</b> This button takes you to the complete <em>KDEPrint Manual</em>"
+" <qt><b>Help:</b> This button takes you to the complete <em>TDEPrint Manual</em>"
 ". </qt>"
 msgstr ""
 " <qt><b>Hjelp:</b> Knappen fører deg til den komplette <em>"
-"hjelpeteksten til KDE-utskrift</em>. </qt>"
+"hjelpeteksten til TDE-utskrift</em>. </qt>"
 
 #: kprintdialog.cpp:186
 msgid ""
@@ -663,12 +663,12 @@ msgstr ""
 #: kprintdialog.cpp:190
 msgid ""
 " <qt><b>Print:</b> This button sends the job to the printing process. If you "
-"are sending non-PostScript files, you may be asked if you want KDE to convert "
+"are sending non-PostScript files, you may be asked if you want TDE to convert "
 "the files into PostScript, or if you want your print subsystem (like CUPS) to "
 "do this. </qt>"
 msgstr ""
 " <qt><b>Skriv ut:</b> Knappen sender jobben til ein utskriftsprosess. Om du "
-"sender ei ikkje-PostScript-fil, må du kanskje avgjera om KDE skal gjera om fila "
+"sender ei ikkje-PostScript-fil, må du kanskje avgjera om TDE skal gjera om fila "
 "til PostScript, eller om undersystemet for utskrift (som CUPS) skal gjera det. "
 "</qt>"
 
@@ -693,12 +693,12 @@ msgstr ""
 msgid ""
 " <qt><b>Output File Name and Path:</b> The \"Output file:\" shows  you where "
 "your file will be saved if you decide to \"Print to File\" your job, using one "
-"of the KDE <em>Special Printers</em> named \"Print to File (PostScript)\" or "
+"of the TDE <em>Special Printers</em> named \"Print to File (PostScript)\" or "
 "\"Print to File (PDF)\". Choose a name and location that suits your need by "
 "using the button and/or editing the line on the right. </qt>"
 msgstr ""
 " <qt><b>Namn og stig til utfil:</b> «Utfil:» viser kor fila vert lagra ved "
-"valet «Skriv til fil» ved bruk av ein av KDE sine <em>Spesielle skrivarar</em> "
+"valet «Skriv til fil» ved bruk av ein av TDE sine <em>Spesielle skrivarar</em> "
 "med namn som «Skriv til fil (PostScript)» eller «Skriv til fil (PDF)». Vel eit "
 "namn og stad som passar ved å bruka knappen og/eller rediger linja til høgre. "
 "</qt>"
@@ -748,9 +748,9 @@ msgid ""
 "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting "
 "paper first. It also lets you cancel the job if something looks wrong.  "
 "<p><b>Note:</b> The preview feature (and therefore this checkbox)  is only "
-"visible for printjobs created from inside KDE applications.  If you start "
+"visible for printjobs created from inside TDE applications.  If you start "
 "kprinter from the commandline, or if you use kprinter  as a print command for "
-"non-KDE applications (like Acrobat Reader,  Firefox or OpenOffice), print "
+"non-TDE applications (like Acrobat Reader,  Firefox or OpenOffice), print "
 "preview is not available here.  </qt>"
 msgstr ""
 " <qt><b>Førehandsvising</b> Kryss av her viss du vil sjå ei førehandsvising av "
@@ -897,7 +897,7 @@ msgid ""
 "secretaries who serve different bosses, etc.</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"  </pre> </p>  </qt>"
@@ -929,7 +929,7 @@ msgid ""
 "trays).</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "</pre> </p>  </qt>"
@@ -965,7 +965,7 @@ msgid ""
 "<p>They contain any string you type into the line edit field.</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-label=\"...\"      # example: \"Company Confidential\"  </pre> "
 "</p>  </qt>"
@@ -992,7 +992,7 @@ msgid ""
 "no other, higher prioritized one is present).</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o job-priority=...   # example: \"10\" or \"66\" or \"99\"  </pre> "
 "</p>  </qt>"
@@ -1443,7 +1443,7 @@ msgid ""
 "<p>The default value is 10, meaning that the font is scaled in a way that 10 "
 "characters  per inch will be printed. </p>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o cpi=...          # example: \"8\" or \"12\"  </pre> </p>  </qt>"
 msgstr ""
@@ -1457,7 +1457,7 @@ msgid ""
 "<p>The default value is 6, meaning that the font is scaled in a way that 6 "
 "lines  per inch will be printed. </p>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o lpi=...         # example \"5\" or \"7\"  </pre> </p>  </qt>"
 msgstr ""
@@ -1471,7 +1471,7 @@ msgid ""
 "<p>The default value is 1, meaning that only one column of text per page  will "
 "be printed. </p>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o columns=...     # example: \"2\" or \"4\"  </pre> </p>  </qt>"
 msgstr ""
@@ -1487,11 +1487,11 @@ msgid ""
 "<p>These settings control the appearance of text on printouts. They are only "
 "valid for  printing text files or input directly through kprinter. </p>  "
 "<p><b>Note:</b> These settings have no effect whatsoever for other input "
-"formats than  text, or for printing from applications such as the KDE Advanced "
+"formats than  text, or for printing from applications such as the TDE Advanced "
 "Text Editor. (Applications  in general send PostScript to the print system, and "
 "'kate' in particular has its own  knobs to control the print output. </p>. "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o cpi=...         # example: \"8\" or \"12\"  "
 "<br>     -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1504,9 +1504,9 @@ msgid ""
 "<p><b>Margins</b></p>  "
 "<p>These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). </p>  "
-"<p>When printing from KDE applications, such as KMail and Konqueror, or "
+"<p>When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. </p>  "
 "<p>Margins may be set individually for each edge of the paper. The combo box at "
@@ -1515,7 +1515,7 @@ msgid ""
 "<p>You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). </p>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o page-top=...      # example: \"72\"  "
 "<br>     -o page-bottom=...   # example: \"24\"  "
@@ -1536,7 +1536,7 @@ msgid ""
 "enscript</em>  pre-filter on the <em>Filters</em> tab. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o prettyprint=true.  </pre> </p>  </qt>"
 msgstr ""
@@ -1550,7 +1550,7 @@ msgid ""
 "margins, though.) </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o prettyprint=false  </pre> </p>  </qt>"
 msgstr ""
@@ -1568,7 +1568,7 @@ msgid ""
 "enscript</em>  pre-filter on the <em>Filters</em> tab. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o prettyprint=true.  "
 "<br>     -o prettyprint=false  </pre> </p>  </qt>"
@@ -1633,7 +1633,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "<ul> "
 "<li>Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. </li> "
+"TDEPrint GUI. </li> "
 "<li>Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.</li>  "
 "<li>Send short messages to the operators of your production printers in your  "
@@ -1667,7 +1667,7 @@ msgid ""
 "<p><b>Note:</b> the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "<p><b>Warning:</b> Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) </p>  </qt>"
@@ -1886,7 +1886,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o blackplot=true  </pre>  </p>  </qt>"
 msgstr ""
@@ -1906,7 +1906,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o fitplot=true   </pre> </p>  </qt>"
 msgstr ""
@@ -1923,7 +1923,7 @@ msgid ""
 "set inside  the plot file itself..</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o penwidth=...   # example: \"2000\" or \"500\"  </pre> </p>  </qt>"
 msgstr ""
@@ -1931,11 +1931,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 " <qt>  <b>HP-GL Print Options</b>  "
-"<p>All options on this page are only applicable if you use KDEPrint to send "
+"<p>All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. </p>  "
 "<p>HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. </p>  "
-"<p>KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"<p>TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. </p>  "
 "<p><b>Note 1:</b> To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.</p> "
@@ -1944,7 +1944,7 @@ msgid ""
 "1.1.22).</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> These KDEPrint GUI elements "
+"<p><em><b>Additional hint for power users:</b> These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:</em>  "
 "<pre>     -o blackplot=...  # examples: \"true\" or \"false\"  "
 "<br>     -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -2182,7 +2182,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o brightness=...      # use range from \"0\" to \"200\"  </pre>  </p>  "
 "</qt>"
@@ -2226,7 +2226,7 @@ msgid ""
 "<td>Light-navy-blue</td> </tr>  </table>  </center>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o hue=...     # use range from \"-360\" to \"360\"  </pre> </p>  </qt>"
 msgstr ""
@@ -2244,7 +2244,7 @@ msgid ""
 "make the colors extremely intense. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o saturation=...      # use range from \"0\" to \"200\"  </pre> </p>  "
 "</qt>"
@@ -2261,7 +2261,7 @@ msgid ""
 "preview. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o gamma=...      # use range from \"1\" to \"3000\"  </pre> </p>  "
 "</qt>"
@@ -2332,7 +2332,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  </ul>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o natural-scaling=...     # range in  %  is 1....800  "
 "<br>     -o scaling=...             # range in  %  is 1....800  "
@@ -2380,7 +2380,7 @@ msgid ""
 "paper printout. Default  is 'center'. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o position=...       # examples: \"top-left\" or \"bottom\"  </pre> "
 "</p>  </qt>"
@@ -3212,13 +3212,13 @@ msgstr "Br&uk eksternt program for førehandsvising"
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 "Du kan bruka eit eksternt program for førehandsvising (PS-framvisar) i staden "
-"for det innebygde førehandsvisingssystemet i KDE. Legg merke til at dersom KDE "
-"ikkje finn standardprogrammet (KGhostView), prøver KDE automatisk å finna ein "
+"for det innebygde førehandsvisingssystemet i TDE. Legg merke til at dersom TDE "
+"ikkje finn standardprogrammet (KGhostView), prøver TDE automatisk å finna ein "
 "annan, ekstern PostScript-framvisar."
 
 #: management/kmwdrivertest.cpp:41
@@ -3286,8 +3286,8 @@ msgstr ""
 "<p>%1</p></qt>"
 
 #: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "Set opp KDE-utskrift"
+msgid "Configure TDE Print"
+msgstr "Set opp TDE-utskrift"
 
 #: management/kaddprinterwizard.cpp:11
 msgid "Configure print server"
@@ -3321,8 +3321,8 @@ msgstr ""
 "Kan ikkje starta opprettinga av drivardatabasen. Utføringa av %1 mislukkast."
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
-msgstr "Vent litt medan KDE byggjer opp ein drivardatabase."
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Vent litt medan TDE byggjer opp ein drivardatabase."
 
 #: management/kmdbcreator.cpp:114
 msgid "Driver Database"
@@ -3396,8 +3396,8 @@ msgid "Change..."
 msgstr "Endra …"
 
 #: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "Oppsett av utskrift i KDE"
+msgid "TDE Print Configuration"
+msgstr "Oppsett av utskrift i TDE"
 
 #: management/kmwdriver.cpp:33
 msgid "Printer Model Selection"
@@ -3549,10 +3549,10 @@ msgstr " s"
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various <b>KDE Print</b> "
+"This time setting controls the refresh rate of various <b>TDE Print</b> "
 "components like the print manager and the job viewer."
 msgstr ""
-"Denne tidsinnstillinga styrer oppfriskingsraten på ymse KDE-utskriftskomponent "
+"Denne tidsinnstillinga styrer oppfriskingsraten på ymse TDE-utskriftskomponent "
 "som utskriftshandsamaren og jobbvisaren."
 
 #: management/kmconfiggeneral.cpp:57
@@ -3698,12 +3698,12 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
 msgstr ""
-"Når du brukar innebyggjing av skrifter, kan du velja fleire katalogar der KDE "
+"Når du brukar innebyggjing av skrifter, kan du velja fleire katalogar der TDE "
 "skal leita etter skriftfiler som kan lagrast i PS-fila. Vanlegvis vert "
 "skriftsøkjestigen til X-tenaren bruka, så dei katalogane treng du ikke oppgje. "
 "I de fleste tilfella er den vanlege søkjestigen tilstrekkeleg."
@@ -4099,7 +4099,7 @@ msgid ""
 "<br>"
 "<p>We hope you'll enjoy this tool!</p>"
 "<br><p align=right><a href=\"http://printing.kde.org\"><i>"
-"The KDE printing team</i></a>.</p>"
+"The TDE printing team</i></a>.</p>"
 msgstr ""
 "<p>Velkommen!</p>"
 "<br>"
@@ -4109,7 +4109,7 @@ msgstr ""
 "<br>"
 "<p>Me håpar du har nytte av dette verktøyet!</p>"
 "<br><p align=right><a href=\"http://printing.kde.org\"><i>"
-"Utskriftslaget i KDE</i></a></p>"
+"Utskriftslaget i TDE</i></a></p>"
 
 #: management/kmdriverdbwidget.cpp:51
 msgid "&PostScript printer"
@@ -4609,13 +4609,13 @@ msgid ""
 " <qt> <b>File Open button</b> "
 "<p>This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.</p> "
-"<p>If you open files, KDEPrint will use the application matching the MIME type "
+"<p>If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.</p> </qt>"
 msgstr ""
 "<qt><b>Opna fil</b> "
 "<p>Knappen prøver å opna dei merkte filene slik at dei kan visast eller "
 "redigerast før dei vert sendt til utskrift.</p> "
-"<p>Om filer vert opna, vil KDE-utskrift bruka eit program som passar MIME-typen "
+"<p>Om filer vert opna, vil TDE-utskrift bruka eit program som passar MIME-typen "
 "til fila.</p> </qt>"
 
 #: kfilelist.cpp:82
@@ -4623,7 +4623,7 @@ msgid ""
 " <qt> <b>File List view</b> "
 "<p>This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.</p> "
 "<p>The files will be printed as a single job, in the same order as displayed in "
 "the list.</p> "
@@ -4631,18 +4631,18 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.</p> "
+"files, TDEPrint will use the application matching the MIME type of the file.</p> "
 "</qt>"
 msgstr ""
 "<qt><b>Fillistevising</b> "
 "<p>Lista viser alle filer som er valt for utskrift. Du kan sjå filnamna, "
-"filplasseringa og filene sine (MIME) typar avgjort av KDE-utskrift. "
+"filplasseringa og filene sine (MIME) typar avgjort av TDE-utskrift. "
 "Oppstartsrekkjefølgja i lista er rekkjefølgja som først blei valt. </p> "
 "<p>Lista blir skrive ut i samme rekkjefølgje som vist.</p> "
 "<p><b>Merk:</b> Du kan velja fleire filer. Filer kan vera plassert fleire "
 "stader. Filene kan ha ulike MIME-typar. Knappen på høgresida legg til fleire "
 "filer, fjernar merkte filer frå lista, endrar rekkjefølgja i lista (ved å "
-"flytta filer opp og ned) og opnar filer. Ved opning av filer vil KDE-utskrift "
+"flytta filer opp og ned) og opnar filer. Ved opning av filer vil TDE-utskrift "
 "bruka eit program som passer MIME-typen til fila.</p></qt>"
 
 #: kfilelist.cpp:103
@@ -4677,15 +4677,15 @@ msgstr "Tilpassingar"
 msgid ""
 " <qt><b>Print Subsystem Selection</b> "
 "<p>This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the <em>"
 "Common UNIX Printing System</em>. </qt>"
 msgstr ""
 "<qt><b>Val av utskriftssystem</b> "
 "<p>Kombinasjonsboksen viser (og muliggjer val av) eit undersystem for utskrift "
-"som vert bruka i KDE-utskrift. (Undersystemet for utskrift må vera installert "
-"som ein del av operativsystemet.) KDE-utskrift gjenkjenner det vanlegvis "
+"som vert bruka i TDE-utskrift. (Undersystemet for utskrift må vera installert "
+"som ein del av operativsystemet.) TDE-utskrift gjenkjenner det vanlegvis "
 "automatisk. Dei fleste linux-distribusjonar har «CUPS», <em>"
 "Common Unix Printing System</em>. </qt>"
 
@@ -4730,7 +4730,7 @@ msgid ""
 "<p><b>Note.</b> The number of available job options depends strongly on the "
 "actual  driver used for your print queue. <em>'Raw'</em> "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
 msgstr ""
 
 #: driverview.cpp:71
@@ -4755,7 +4755,7 @@ msgid ""
 "<p><b>Note.</b> The number of available job options depends strongly on the "
 "actual  driver used for your print queue. <em>'Raw'</em> "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
 msgstr ""
 
 #: kprinter.cpp:280
@@ -4813,8 +4813,8 @@ msgstr "Parallellport %1"
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, c-format
-msgid "Unable to load KDE print management library: %1"
-msgstr "Kan ikkje lasta KDE-biblioteket for utskriftshandtering: %1"
+msgid "Unable to load TDE print management library: %1"
+msgstr "Kan ikkje lasta TDE-biblioteket for utskriftshandtering: %1"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
 msgid "Unable to find wizard object in management library."
@@ -4840,12 +4840,12 @@ msgstr "Skrivarkø over nettverk på %1"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
-"Fila share/tdeprint/specials.desktop vart funnen i den lokale KDE-katalogen. "
-"Denne fila kjem sannsynlegvis frå ei tidlegare KDE-utgåve og bør fjernast slik "
+"Fila share/tdeprint/specials.desktop vart funnen i den lokale TDE-katalogen. "
+"Denne fila kjem sannsynlegvis frå ei tidlegare TDE-utgåve og bør fjernast slik "
 "at du kan handtera globale pseudoskrivarar."
 
 #: kprinterimpl.cpp:156
@@ -4872,10 +4872,10 @@ msgstr "Klarte ikkje starta barneprosess for utskrift. "
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
+"The TDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
 "server is running."
 msgstr ""
-"Klarte ikkje kontakta KDE-utskriftstenaren (<b>tdeprintd</b>"
+"Klarte ikkje kontakta TDE-utskriftstenaren (<b>tdeprintd</b>"
 "). Sjå til at tenaren køyrer."
 
 #: kprinterimpl.cpp:283
@@ -4917,11 +4917,11 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?</p>"
+"file). Do you want TDE to convert the file to a supported format?</p>"
 msgstr ""
 "MIME-typen %1 er ikkje støtta som inntype på filterkjeda. (Dette kan henda med "
 "andre utskriftssystem enn CUPS når du vil velja sider med "
-"ikkje-PostScript-filer.) Vil du at KDE skal konvertera fila til eit format som "
+"ikkje-PostScript-filer.) Vil du at TDE skal konvertera fila til eit format som "
 "er støtta?</p>"
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -4971,22 +4971,22 @@ msgid ""
 "<qt>The file format <em> %1 </em> is not directly supported by the current "
 "print system. You now have 3 options: "
 "<ul> "
-"<li> KDE can attempt to convert this file automatically to a supported format. "
+"<li> TDE can attempt to convert this file automatically to a supported format. "
 "(Select <em>Convert</em>) </li>"
 "<li> You can try to send the file to the printer without any conversion. "
 "(Select <em>Keep</em>) </li>"
 "<li> You can cancel the printjob. (Select <em>Cancel</em>) </li></ul> "
-"Do you want KDE to attempt and convert this file to %2?</qt>"
+"Do you want TDE to attempt and convert this file to %2?</qt>"
 msgstr ""
 "<qt>Filformatet <em>%1</em> er ikkje direkte støtta av utskriftssystemet. Du "
 "har no tre val: "
 "<ul> "
-"<li>KDE kan prøva å konvertera fila automatisk til eit format som er støtta. "
+"<li>TDE kan prøva å konvertera fila automatisk til eit format som er støtta. "
 "(Vel <em>Konverter</em>.)</li> "
 "<li>Du kan prøva å senda fila til skrivaren utan å konvertera henne. (Vel <em>"
 "ikkje rør</em>.)</li> "
 "<li>Du kan avbryta utskriftsjobben. (Vel <em>Avbryt</em>.)</li> </ul>"
-"Vil du at KDE skal prøva å konvertera fila til %2?</qt>"
+"Vil du at TDE skal prøva å konvertera fila til %2?</qt>"
 
 #: kprinterimpl.cpp:518
 msgid ""
@@ -5092,7 +5092,7 @@ msgid ""
 "installed.</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o PageSize=...         # examples: \"A4\" or \"Letter\"  </pre> </p>  "
 "</qt>"
@@ -5107,7 +5107,7 @@ msgid ""
 "installed. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o MediaType=...        # example: \"Transparency\"  </pre> </p>  </qt>"
 msgstr ""
@@ -5122,7 +5122,7 @@ msgid ""
 "installed. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "</pre> </p>  </qt>"
@@ -5148,7 +5148,7 @@ msgid ""
 "down.</li>  </ul>  The icon changes according to your selection.</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"  </pre> </p>  </qt>"
@@ -5183,7 +5183,7 @@ msgid ""
 "if you turn it over  the short edge. (Some printer drivers name this mode  <em>"
 "duplex-tumbled</em>).  </li>  </ul>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 " </pre> </p>  </qt>"
@@ -5208,7 +5208,7 @@ msgid ""
 "<p>CUPS comes with a selection of banner pages. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "</pre> </p>  </qt>"
@@ -5229,7 +5229,7 @@ msgid ""
 "sheet in both places, your printout will not look as you intended. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o number-up=...        # examples: \"2\" or \"4\"  </pre> </p>  </qt>"
 msgstr ""
@@ -5339,11 +5339,11 @@ msgstr "<b>%1</b>: Køyringa var mislukka. Melding:<p>%2</p>"
 
 #: tdeprintd.cpp:176
 msgid ""
-"Some of the files to print are not readable by the KDE print daemon. This may "
+"Some of the files to print are not readable by the TDE print daemon. This may "
 "happen if you are trying to print as a different user to the one currently "
 "logged in. To continue printing, you need to provide root's password."
 msgstr ""
-"KDE-utskriftssystemet kan ikkje lesa enkelte av filene som skal skrivast ut. "
+"TDE-utskriftssystemet kan ikkje lesa enkelte av filene som skal skrivast ut. "
 "Dette kan skje dersom du prøver å skriva ut som ein annan brukar enn den som er "
 "logga inn. For å halda fram må du oppgje root-passordet."
 
@@ -5394,15 +5394,15 @@ msgstr ""
 #: kpcopiespage.cpp:55
 msgid ""
 " <qt><b>Current Page:</b> Select <em>\"Current\"</em> "
-"if you want  to print the page currently visible in your KDE application.</p> "
-"<p><b>Note:</b> this field is disabled if you print from non-KDE applications "
-"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine "
+"if you want  to print the page currently visible in your TDE application.</p> "
+"<p><b>Note:</b> this field is disabled if you print from non-TDE applications "
+"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine "
 "which document page you are currently viewing.</p></qt>"
 msgstr ""
 "<qt><b>Denne sida:</b> Vel <em>«Denne»</em> viss du vil skriva ut den sida som "
-"no vert vist i KDE-applikasjonen din.</p> "
-"<p><b>Merk:</b> dette feltet er slått av viss du skriv ut frå ikkje-KDE "
-"applikasjonar som Mozilla eller OpenOffice.org, fordi då har ikkje KDEPrint "
+"no vert vist i TDE-applikasjonen din.</p> "
+"<p><b>Merk:</b> dette feltet er slått av viss du skriv ut frå ikkje-TDE "
+"applikasjonar som Mozilla eller OpenOffice.org, fordi då har ikkje TDEPrint "
 "høve til å finna ut kva side du ser på no.</p></qt>"
 
 #: kpcopiespage.cpp:60
@@ -5415,7 +5415,7 @@ msgid ""
 "document.</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"  </pre> "
 "</p> </qt>"
@@ -5444,7 +5444,7 @@ msgid ""
 "model).</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-set=...        # example: \"odd\" or \"even\"  </pre> </p>  "
 "</qt>"
@@ -5470,7 +5470,7 @@ msgid ""
 "<p>The 'Copies' setting defaults to 1. </p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o copies=...            # examples: \"5\" or \"42\"  "
 "<br>     -o outputorder=...       # example:  \"reverse\" "
@@ -5486,7 +5486,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>     -o copies=...            # examples: \"5\" or \"42\"  </pre> </p>  "
 "</qt>"
@@ -5506,7 +5506,7 @@ msgid ""
 "3-3-3-...\".</p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o Collate=...           # example:  \"true\" or \"false\"  </pre> </p>  "
 "</qt>"
@@ -5532,7 +5532,7 @@ msgid ""
 "checkbox at the same time. </p> "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o outputorder=...       # example:  \"reverse\"  </pre> </p>  </qt>"
 msgstr ""
@@ -5623,18 +5623,18 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
 "Førehandsvising mislukkast: Fann ikkje verken den interne PostScript-visaren i "
-"KDE (KGhostView) eller nokon annan ekstern PostScript-visar."
+"TDE (KGhostView) eller nokon annan ekstern PostScript-visar."
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
-"Førehåndsvising feila: KDE fant ikkje eit program for å visa fila av type %1."
+"Førehåndsvising feila: TDE fant ikkje eit program for å visa fila av type %1."
 
 #: kprintpreview.cpp:314
 #, c-format
@@ -5699,7 +5699,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  </pre> </p>  </qt>"
@@ -5720,7 +5720,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  </pre> </qt>"
@@ -5741,7 +5741,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  </pre> </qt>"
@@ -5762,7 +5762,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.</p>  "
 "<br>  "
 "<hr>  "
-"<p><em><b>Additional hint for power users:</b> This KDEPrint GUI element "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:</em>  "
 "<pre>    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  </pre> </qt>"
@@ -5790,7 +5790,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. </p>  </qt>"
 msgstr ""
 
@@ -5845,14 +5845,14 @@ msgstr "JCL"
 #: kmvirtualmanager.cpp:161
 msgid ""
 "<qt>You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set <b>%1</b> as your personal default?</qt>"
 msgstr ""
 "<qt>Du er i ferd med å velja ein pseudo-skrivar som personleg standard. Denne "
-"innstillinga vil berre gjelda for KDE og kan ikkje brukast frå "
-"ikkje-KDE-program. Det vil føra til at du ikkje har nokon standardskrivar i "
+"innstillinga vil berre gjelda for TDE og kan ikkje brukast frå "
+"ikkje-TDE-program. Det vil føra til at du ikkje har nokon standardskrivar i "
 "andre program, men du kan likevel skriva ut på vanleg måte. Vil du verkeleg ha "
 "<b>%1</b> som personleg standard?</qt>"
 
@@ -5869,7 +5869,7 @@ msgid ""
 "here, the <em>'Poster Printing' filter</em> will be auto-loaded in  the "
 "'Filters' tab of this dialog. </p> "
 "<p>This tab is only visible if the external <em>'poster'</em> "
-"utility is  discovered by KDEPrint on your system. [<em>'poster'</em> "
+"utility is  discovered by TDEPrint on your system. [<em>'poster'</em> "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] </p> "
@@ -5877,7 +5877,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. </p> "
 "<p><b>Additional hint for power users:</b> A patched version of 'poster' is  "
-"available from the <a href=\"http://printing.kde.org/\">KDEPrint Website</a>  "
+"available from the <a href=\"http://printing.kde.org/\">TDEPrint Website</a>  "
 "at <a "
 "href=\"http://printing.kde.org/downloads/\">http://printing.kde.org/downloads/</"
 "a>.  The direct link to the patched source tarball is  <a "
@@ -6040,7 +6040,7 @@ msgid ""
 " <qt> <b>Add Filter button</b> "
 "<p>This button calls a little dialog to let you select a filter here. </p> "
 "<p><b>Note 1:</b> You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.</p>  "
 "<p><b>Note 2:</b> The filters you define here are applied to your jobfile  <em>"
 "<b>before</b></em> it is handed downstream to your spooler and print  subsystem "
@@ -6098,7 +6098,7 @@ msgid ""
 "<p>This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "<ul>  "
-"<li>the <em>filter name</em> (as displayed in the KDEPrint user interface); "
+"<li>the <em>filter name</em> (as displayed in the TDEPrint user interface); "
 "</li>  "
 "<li>the <em>filter requirements</em> (that is the external program that needs  "
 "to present and executable on this system); </li>  "
@@ -6115,7 +6115,7 @@ msgid ""
 " <qt> <b>Filtering Chain</b> (if enabled, is run <em>before</em> "
 "actual  job submission to print system) "
 "<p>This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files <em>"
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files <em>"
 "before</em> they are  send downstream to your real print subsystem. </p>  "
 "<p>The list shown in this field may be empty (default). </p>  "
 "<p>The pre-filters act on the printjob in the order they are listed (from top "
@@ -6125,13 +6125,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. </p>  "
-"<p>KDEPrint can utilize <em>any</em> external filtering program which you may "
+"<p>TDEPrint can utilize <em>any</em> external filtering program which you may "
 "find useful  through this interface. </p>  "
-"<p>KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work <em>for all</em> print subsystems supported by KDEPrint (such "
+"<p>TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work <em>for all</em> print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.</p> ."
-"<p> Amongst the pre-configured filters shipping with KDEPrint are: </p>  "
+"<p> Amongst the pre-configured filters shipping with TDEPrint are: </p>  "
 "<ul>  "
 "<li>the <em>Enscript text filter</em>  </li>  "
 "<li>a <em>Multiple Pages per Sheet filter</em </li>  "
@@ -6142,7 +6142,7 @@ msgid ""
 "click on the <em>funnel</em> icon (topmost on  the right icon column group) and "
 "proceed. </p> "
 "<p>Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  </p> </qt>"
+"TDEPrint  pre-filters.  </p> </qt>"
 msgstr ""
 
 #: kpfilterpage.cpp:125
@@ -6191,7 +6191,7 @@ msgid ""
 "<ul>"
 "<li><b>Color</b> and</li>  "
 "<li><b>Grayscale</b></li></ul>  <b>Note:</b> This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  </qt>"