From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001 From: Darrell Anderson Date: Fri, 23 Mar 2012 18:31:57 -0500 Subject: Fix KDE -> TDE branding. --- tde-i18n-be/messages/tdelibs/kio.po | 108 +++++++-------- tde-i18n-be/messages/tdelibs/tdelibs.po | 216 +++++++++++++++--------------- tde-i18n-be/messages/tdelibs/tdeprint.po | 220 +++++++++++++++---------------- 3 files changed, 272 insertions(+), 272 deletions(-) (limited to 'tde-i18n-be') diff --git a/tde-i18n-be/messages/tdelibs/kio.po b/tde-i18n-be/messages/tdelibs/kio.po index 0f0a96383c6..1e9c47687c1 100644 --- a/tde-i18n-be/messages/tdelibs/kio.po +++ b/tde-i18n-be/messages/tdelibs/kio.po @@ -1,6 +1,6 @@ # translation of kio.po to Belarusian # Belarusian (classic spelling) translation of kio.pot -# Copyright (C) 2003-2004 KDE Team. +# Copyright (C) 2003-2004 TDE Team. # # Eugene Zelenko , 2003-2004. # Ihar Hrachyshka , 2006. @@ -383,7 +383,7 @@ msgstr "" #: kio/tcpslavebase.cpp:1008 msgid "" -"SSL certificate is being rejected as requested. You can disable this in the KDE " +"SSL certificate is being rejected as requested. You can disable this in the TDE " "Control Center." msgstr "" @@ -1182,11 +1182,11 @@ msgstr "" #: kio/global.cpp:586 msgid "" -"When all else fails, please consider helping the KDE team or the third party " +"When all else fails, please consider helping the TDE team or the third party " "maintainer of this software by submitting a high quality bug report. If the " "software is provided by a third party, please contact them directly. Otherwise, " "first look to see if the same bug has been submitted by someone else by " -"searching at the KDE bug reporting website" +"searching at the TDE bug reporting website" ". If not, take note of the details given above, and include them in your bug " "report, along with as many other details as you think might help." msgstr "" @@ -1277,7 +1277,7 @@ msgstr "" #: kio/global.cpp:637 msgid "" "The program which provides compatibility with this protocol may not have been " -"updated with your last update of KDE. This can cause the program to be " +"updated with your last update of TDE. This can cause the program to be " "incompatible with the current version and thus not start." msgstr "" @@ -1311,7 +1311,7 @@ msgstr "Непадтрымліваемы пратакол %1" #: kio/global.cpp:665 msgid "" -"The protocol %1 is not supported by the KDE programs currently " +"The protocol %1 is not supported by the TDE programs currently " "installed on this computer." msgstr "" @@ -1327,7 +1327,7 @@ msgstr "" #: kio/global.cpp:671 msgid "" -"You may perform a search on the Internet for a KDE program (called a kioslave " +"You may perform a search on the Internet for a TDE program (called a kioslave " "or ioslave) which supports this protocol. Places to search include http://kde-apps.org/ " "and http://freshmeat.net/." @@ -1349,7 +1349,7 @@ msgstr "" #: kio/global.cpp:685 msgid "" -"KDE is able to communicate through a protocol within a protocol; the protocol " +"TDE is able to communicate through a protocol within a protocol; the protocol " "specified is only for use in such situations, however this is not one of these " "situations. This is a rare event, and is likely to indicate a programming " "error." @@ -1362,14 +1362,14 @@ msgstr "Непадтрымліваемае дзеянне: %1" #: kio/global.cpp:694 msgid "" -"The requested action is not supported by the KDE program which is implementing " +"The requested action is not supported by the TDE program which is implementing " "the %1 protocol." msgstr "" #: kio/global.cpp:697 msgid "" -"This error is very much dependent on the KDE program. The additional " -"information should give you more information than is available to the KDE " +"This error is very much dependent on the TDE program. The additional " +"information should give you more information than is available to the TDE " "input/output architecture." msgstr "" @@ -1512,7 +1512,7 @@ msgstr "Пратакол %1 не з'яўляецца файлавай сістэ #: kio/global.cpp:792 msgid "" "This means that a request was made which requires determining the contents of " -"the folder, and the KDE program supporting this protocol is unable to do so." +"the folder, and the TDE program supporting this protocol is unable to do so." msgstr "" #: kio/global.cpp:800 @@ -1522,7 +1522,7 @@ msgstr "Знойдзена цыклічная спасылка" #: kio/global.cpp:801 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. KDE detected a link or series of links that results in an " +"and/or location. TDE detected a link or series of links that results in an " "infinite loop - i.e. the file was (perhaps in a roundabout way) linked to " "itself." msgstr "" @@ -1552,7 +1552,7 @@ msgstr "Падчас капіявання знойдзена цыклічная #: kio/global.cpp:822 msgid "" "UNIX environments are commonly able to link a file or folder to a separate name " -"and/or location. During the requested copy operation, KDE detected a link or " +"and/or location. During the requested copy operation, TDE detected a link or " "series of links that results in an infinite loop - i.e. the file was (perhaps " "in a roundabout way) linked to itself." msgstr "" @@ -1639,7 +1639,7 @@ msgstr "" #: kio/global.cpp:873 msgid "" -"KDE is able to communicate through a protocol within a protocol. This request " +"TDE is able to communicate through a protocol within a protocol. This request " "specified a protocol be used as such, however this protocol is not capable of " "such an action. This is a rare event, and is likely to indicate a programming " "error." @@ -1936,13 +1936,13 @@ msgstr "Памылка аўтарызацыі: Метад %1 не падтрым msgid "" "Although you may have supplied the correct authentication details, the " "authentication failed because the method that the server is using is not " -"supported by the KDE program implementing the protocol %1." +"supported by the TDE program implementing the protocol %1." msgstr "" #: kio/global.cpp:1101 msgid "" "Please file a bug at http://bugs.kde.org/ " -"to inform the KDE team of the unsupported authentication method." +"to inform the TDE team of the unsupported authentication method." msgstr "" #: kio/global.cpp:1107 @@ -1987,7 +1987,7 @@ msgid "" "
  • Timeout for establishing a connection: %1 seconds
    • " "
  • Timeout for receiving a response: %2 seconds
    • " "
  • Timeout for accessing proxy servers: %3 seconds
    • " -"Please note that you can alter these timeout settings in the KDE Control " +"Please note that you can alter these timeout settings in the TDE Control " "Center, by selecting Network -> Preferences." msgstr "" @@ -2284,8 +2284,8 @@ msgid "&Edit..." msgstr "&Змяніць..." #: kio/kmimetypechooser.cpp:104 -msgid "Click this button to display the familiar KDE mime type editor." -msgstr "Націсніце гэтую кнопку, каб запусціць рэдактар тыпаў mime для KDE." +msgid "Click this button to display the familiar TDE mime type editor." +msgstr "Націсніце гэтую кнопку, каб запусціць рэдактар тыпаў mime для TDE." #: kssl/ksslcertdlg.cc:61 msgid "Certificate" @@ -2305,7 +2305,7 @@ msgid "Do not send a certificate" msgstr "Не дасылаць сертыфікат" #: kssl/ksslcertdlg.cc:84 -msgid "KDE SSL Certificate Dialog" +msgid "TDE SSL Certificate Dialog" msgstr "Сертыфікат SSL" #: kssl/ksslcertdlg.cc:139 @@ -2423,24 +2423,24 @@ msgid "GMT" msgstr "GMT" #: kssl/ksslkeygen.cc:48 -msgid "KDE Certificate Request" -msgstr "Запыт сертыфікату KDE" +msgid "TDE Certificate Request" +msgstr "Запыт сертыфікату TDE" #: kssl/ksslkeygen.cc:50 -msgid "KDE Certificate Request - Password" -msgstr "Запыт сертыфікату KDE - Пароль" +msgid "TDE Certificate Request - Password" +msgstr "Запыт сертыфікату TDE - Пароль" #: kssl/ksslkeygen.cc:93 msgid "Unsupported key size." msgstr "Непадтрымліваемы памер ключа." #: kssl/ksslinfodlg.cc:120 kssl/ksslkeygen.cc:93 -msgid "KDE SSL Information" +msgid "TDE SSL Information" msgstr "Інфармацыя аб SSL" #: kssl/ksslkeygen.cc:97 misc/uiserver.cpp:1383 -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: kssl/ksslkeygen.cc:97 msgid "Please wait while the encryption keys are generated..." @@ -2491,8 +2491,8 @@ msgid "Current connection is not secured with SSL." msgstr "Злучэнне небяспечнае - SSL не выкарыстоўваецца." #: kssl/ksslinfodlg.cc:99 -msgid "SSL support is not available in this build of KDE." -msgstr "Падтрымка SSL адсутнічае ў гэтай зборцы KDE." +msgid "SSL support is not available in this build of TDE." +msgstr "Падтрымка SSL адсутнічае ў гэтай зборцы TDE." #: kssl/ksslinfodlg.cc:109 msgid "C&ryptography Configuration..." @@ -2680,7 +2680,7 @@ msgstr "" #: misc/kfile/fileprops.cpp:240 msgid "" -"Opens a KDE properties dialog to allow viewing and modifying of metadata of the " +"Opens a TDE properties dialog to allow viewing and modifying of metadata of the " "given file(s)" msgstr "" @@ -2730,10 +2730,10 @@ msgstr "Немагчыма вызначыць метададзеныя" #: misc/kwalletd/kwalletd.cpp:400 msgid "" -"KDE has requested to open the wallet '%1'. Please enter the password " +"TDE has requested to open the wallet '%1'. Please enter the password " "for this wallet below." msgstr "" -"KDE запатрабавала адкрыць гаманец '%1'. Калі ласка, увядзіце пароль " +"TDE запатрабавала адкрыць гаманец '%1'. Калі ласка, увядзіце пароль " "гэтага гаманца." #: misc/kwalletd/kwalletd.cpp:402 @@ -2751,21 +2751,21 @@ msgstr "&Адкрыць" #: misc/kwalletd/kwalletd.cpp:414 msgid "" -"KDE has requested to open the wallet. This is used to store sensitive data in a " +"TDE has requested to open the wallet. This is used to store sensitive data in a " "secure fashion. Please enter a password to use with this wallet or click cancel " "to deny the application's request." msgstr "" #: misc/kwalletd/kwalletd.cpp:416 msgid "" -"The application '%1' has requested to open the KDE wallet. This is " +"The application '%1' has requested to open the TDE wallet. This is " "used to store sensitive data in a secure fashion. Please enter a password to " "use with this wallet or click cancel to deny the application's request." msgstr "" #: misc/kwalletd/kwalletd.cpp:423 msgid "" -"KDE has requested to create a new wallet named '%1" +"TDE has requested to create a new wallet named '%1" "'. Please choose a password for this wallet, or cancel to deny the " "application's request." msgstr "" @@ -2785,8 +2785,8 @@ msgstr "&Стварыць" #: misc/kwalletd/kwalletd.cpp:432 misc/kwalletd/kwalletd.cpp:607 #: misc/kwalletd/kwalletd.cpp:623 misc/kwalletd/kwalletd.cpp:634 #: misc/kwalletd/kwalletd.cpp:639 misc/kwalletd/kwalletd.cpp:1157 -msgid "KDE Wallet Service" -msgstr "Сервіс гаманцоў KDE" +msgid "TDE Wallet Service" +msgstr "Сервіс гаманцоў TDE" #: misc/kwalletd/kwalletd.cpp:444 msgid "" @@ -2798,8 +2798,8 @@ msgstr "" "
    (Код памылкі %2: %3)" #: misc/kwalletd/kwalletd.cpp:518 -msgid "KDE has requested access to the open wallet '%1'." -msgstr "KDE запатрабавала доступ для адкрыцця гаманца '%1'." +msgid "TDE has requested access to the open wallet '%1'." +msgstr "TDE запатрабавала доступ для адкрыцця гаманца '%1'." #: misc/kwalletd/kwalletd.cpp:520 msgid "" @@ -3009,7 +3009,7 @@ msgid "" msgstr " Заст. Час: %1 " #: misc/uiserver.cpp:1384 -msgid "KDE Progress Information UI Server" +msgid "TDE Progress Information UI Server" msgstr "" #: misc/uiserver.cpp:1387 misc/uiserver.cpp:1388 @@ -3860,7 +3860,7 @@ msgid "" "already exist). This extension is based on the file type that you have chosen " "to save in." "
    " -"
    If you do not want KDE to supply an extension for the filename, you can " +"
    If you do not want TDE to supply an extension for the filename, you can " "either turn this option off or you can suppress it by adding a period (.) to " "the end of the filename (the period will be automatically removed)." "If unsure, keep this option enabled as it makes your files more manageable." @@ -3871,7 +3871,7 @@ msgid "" "This button allows you to bookmark specific locations. Click on this button " "to open the bookmark menu where you may add, edit or select a bookmark." "

    These bookmarks are specific to the file dialog, but otherwise operate like " -"bookmarks elsewhere in KDE." +"bookmarks elsewhere in TDE." msgstr "" #: kfile/kfileiconview.cpp:62 @@ -4850,8 +4850,8 @@ msgstr "" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 16 #: rc.cpp:15 #, no-c-format -msgid "KDE Wallet Wizard" -msgstr "Майстар гаманцоў KDE" +msgid "TDE Wallet Wizard" +msgstr "Майстар гаманцоў TDE" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 23 #: rc.cpp:18 @@ -4862,14 +4862,14 @@ msgstr "Уводзіны" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 56 #: rc.cpp:21 #, no-c-format -msgid "KWallet - The KDE Wallet System" -msgstr "KWallet - Сістэма гаманцоў KDE" +msgid "KWallet - The TDE Wallet System" +msgstr "KWallet - Сістэма гаманцоў TDE" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 81 #: rc.cpp:24 #, no-c-format msgid "" -"Welcome to KWallet, the KDE Wallet System. KWallet allows you to store your " +"Welcome to KWallet, the TDE Wallet System. KWallet allows you to store your " "passwords and other personal information on disk in an encrypted file, " "preventing others from viewing the information. This wizard will tell you " "about KWallet and help you configure it for the first time." @@ -4891,7 +4891,7 @@ msgstr "&Адмысловае настаўленне" #: rc.cpp:36 #, no-c-format msgid "" -"The KDE Wallet system stores your data in a wallet " +"The TDE Wallet system stores your data in a wallet " "file on your local hard disk. The data is only written in encrypted form, " "presently using the blowfish algorithm with your password as the key. When a " "wallet is opened, the wallet manager application will launch and display an " @@ -4910,7 +4910,7 @@ msgstr "Выбар паролю" #: rc.cpp:42 #, no-c-format msgid "" -"Various applications may attempt to use the KDE wallet to store passwords or " +"Various applications may attempt to use the TDE wallet to store passwords or " "other information such as web form data and cookies. If you would like these " "applications to use the wallet, you must enable it now and choose a password. " "The password you choose cannot be recovered if it is lost, and will " @@ -4933,8 +4933,8 @@ msgstr "Праверка паролю:" #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 301 #: rc.cpp:51 #, no-c-format -msgid "Yes, I wish to use the KDE wallet to store my personal information." -msgstr "Так, я хачу захоўваць персанальную інфармацыю ў гаманцы KDE." +msgid "Yes, I wish to use the TDE wallet to store my personal information." +msgstr "Так, я хачу захоўваць персанальную інфармацыю ў гаманцы TDE." #. i18n: file ./misc/kwalletd/kwalletwizard.ui line 390 #: rc.cpp:54 @@ -4946,7 +4946,7 @@ msgstr "Узровень бяспекі" #: rc.cpp:57 #, no-c-format msgid "" -"The KDE Wallet system allows you to control the level of security of your " +"The TDE Wallet system allows you to control the level of security of your " "personal data. Some of these settings do impact usability. While the default " "settings are generally acceptable for most users, you may wish to change some " "of them. You may further tune these settings from the KWallet control module." @@ -5645,7 +5645,7 @@ msgstr "Немагчыма прачытаць %1" #: ../kioslave/http/http_cache_cleaner.cpp:53 #: ../kioslave/http/http_cache_cleaner.cpp:194 -msgid "KDE HTTP cache maintenance tool" +msgid "TDE HTTP cache maintenance tool" msgstr "Інструмент кіравання кэшам HTTP" #: ../kioslave/http/http_cache_cleaner.cpp:59 diff --git a/tde-i18n-be/messages/tdelibs/tdelibs.po b/tde-i18n-be/messages/tdelibs/tdelibs.po index 798ee93b34b..cba8f41cfb8 100644 --- a/tde-i18n-be/messages/tdelibs/tdelibs.po +++ b/tde-i18n-be/messages/tdelibs/tdelibs.po @@ -598,11 +598,11 @@ msgstr "Прапускаць усе словы ў &верхнім рэгістр #, no-c-format msgid "" "If checked, words that consist of only uppercase letters are not spell checked. " -"This is useful if you have a lot of acronyms, such as KDE for example." +"This is useful if you have a lot of acronyms, such as TDE for example." msgstr "" "Калі ўключаны гэты параметр, словы, якія складаюцца толькі з літараў верхняга " "рэгістру, не будуць спраўджвацца. Гэтая магчымасць зручная для шматлікіх " -"абрэвіятураў, напрыклад, KDE, БНФ ці БРСМ;-)" +"абрэвіятураў, напрыклад, TDE, БНФ ці БРСМ;-)" #. i18n: file ./kspell2/ui/configui.ui line 67 #: rc.cpp:292 @@ -684,8 +684,8 @@ msgstr "Рэкурсіўны пошук доменаў" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 19 #: rc.cpp:455 #, no-c-format -msgid "Removed in KDE 3.5.0" -msgstr "Выдалена ў KDE 3.5.0" +msgid "Removed in TDE 3.5.0" +msgstr "Выдалена ў TDE 3.5.0" #. i18n: file ./dnssd/kcm_kdnssd.kcfg line 25 #: rc.cpp:458 @@ -1626,8 +1626,8 @@ msgid "Unable find script \"%1\"." msgstr "Немагчыма знайсці сцэнар \"%1\"." #: interfaces/kscript/scriptloader.cpp:40 -msgid "KDE Scripts" -msgstr "Сцэнары KDE" +msgid "TDE Scripts" +msgstr "Сцэнары TDE" #: arts/kde/kvideowidget.cpp:82 msgid "Video Toolbar" @@ -2436,17 +2436,17 @@ msgstr "Немагчыма падсвятліць элемент меню '%1'." #: kded/kde-menu.cpp:111 msgid "" -"KDE Menu query tool.\n" +"TDE Menu query tool.\n" "This tool can be used to find in which menu a specific application is shown.\n" "The --highlight option can be used to visually indicate to the user where\n" -"in the KDE menu a specific application is located." +"in the TDE menu a specific application is located." msgstr "" -"Інструмент запытаў да меню KDE.\n" +"Інструмент запытаў да меню TDE.\n" "Гэты інструмент можна выкарыстоўваць для пошуку меню, у якім размешчаны элемент " "стартавання неабходнай праграмы.\n" "Опцыю --highlight можна выкарыстоўваць для таго, каб паказаць карыстальніку, " "дзе\n" -"ў меню KDE размешчаны элемент стартавання праграмы." +"ў меню TDE размешчаны элемент стартавання праграмы." #: kded/kde-menu.cpp:116 msgid "kde-menu" @@ -2502,20 +2502,20 @@ msgid "KDontChangeTheHostName" msgstr "KDontChangeTheHostName" #: kded/khostname.cpp:360 -msgid "Informs KDE about a change in hostname" -msgstr "Паведамляе KDE аб зменах назваў вузлоў" +msgid "Informs TDE about a change in hostname" +msgstr "Паведамляе TDE аб зменах назваў вузлоў" #: kded/kded.cpp:720 msgid "Check Sycoca database only once" msgstr "Праверыць базу данняў Sycoca толькі аднойчы" #: kded/kded.cpp:860 -msgid "KDE Daemon" -msgstr "Сервіс KDE" +msgid "TDE Daemon" +msgstr "Сервіс TDE" #: kded/kded.cpp:862 -msgid "KDE Daemon - triggers Sycoca database updates when needed" -msgstr "Сервіс KDE - абнаўляе базу данняў Sycoca" +msgid "TDE Daemon - triggers Sycoca database updates when needed" +msgstr "Сервіс TDE - абнаўляе базу данняў Sycoca" #: kded/kbuildsycoca.cpp:483 msgid "" @@ -2581,16 +2581,16 @@ msgid "Rebuilds the system configuration cache." msgstr "Наноў стварае кэш сістэмных настаўленняў." #: kded/kbuildsycoca.cpp:750 -msgid "Reloading KDE configuration, please wait..." -msgstr "Чытанне настаўленняў KDE. Чакайце..." +msgid "Reloading TDE configuration, please wait..." +msgstr "Чытанне настаўленняў TDE. Чакайце..." #: kded/kbuildsycoca.cpp:751 -msgid "KDE Configuration Manager" -msgstr "Кіраўнік настаўлення KDE" +msgid "TDE Configuration Manager" +msgstr "Кіраўнік настаўлення TDE" #: kded/kbuildsycoca.cpp:753 -msgid "Do you want to reload KDE configuration?" -msgstr "Вы хочаце перачытаць настаўленні KDE?" +msgid "Do you want to reload TDE configuration?" +msgstr "Вы хочаце перачытаць настаўленні TDE?" #: kded/kbuildsycoca.cpp:753 msgid "Do Not Reload" @@ -2776,7 +2776,7 @@ msgid "The library %1 does not offer an %2 function." msgstr "Бібліятэка %1 не прапаноўвае функцыю %2." #: tdecore/klibloader.cpp:168 -msgid "The library %1 does not offer a KDE compatible factory." +msgid "The library %1 does not offer a TDE compatible factory." msgstr "" #: tdecore/klibloader.cpp:425 @@ -2792,11 +2792,11 @@ msgstr "LTR" #: tdecore/kapplication.cpp:1404 msgid "" -"There was an error setting up inter-process communications for KDE. The message " +"There was an error setting up inter-process communications for TDE. The message " "returned by the system was:\n" "\n" msgstr "" -"Адбылася памылка ўсталявання сувязі паміж працэсамі KDE. Сістэма паведаміла:\n" +"Адбылася памылка ўсталявання сувязі паміж працэсамі TDE. Сістэма паведаміла:\n" "\n" #: tdecore/kapplication.cpp:1408 @@ -2974,11 +2974,11 @@ msgstr "Немагчыма адкрыць Цэнтр дапамогі" #: tdecore/kapplication.cpp:2245 tdecore/kapplication.cpp:2280 #, c-format msgid "" -"Could not launch the KDE Help Center:\n" +"Could not launch the TDE Help Center:\n" "\n" "%1" msgstr "" -"Немагчыма адкрыць Цэнтр дапамогі KDE:\n" +"Немагчыма адкрыць Цэнтр дапамогі TDE:\n" "\n" "%1" @@ -4221,14 +4221,14 @@ msgstr "Adar II" #: tdecore/kaboutdata.cpp:388 msgid "" "_: replace this with information about your translation team\n" -"

    KDE is translated into many languages thanks to the work of the translation " +"

    TDE is translated into many languages thanks to the work of the translation " "teams all over the world.

    " -"

    For more information on KDE internationalization visit For more information on TDE internationalization visit http://l10n.kde.org

    " msgstr "" -"

    KDE перакладзенае на шмат моваў свету дзякуючы працы вольных " +"

    TDE перакладзенае на шмат моваў свету дзякуючы працы вольных " "перакладчыкаў.

    " -"

    Каб атрымаць падрабязную інфармацыю аб перакладзе KDE, наведайце Каб атрымаць падрабязную інфармацыю аб перакладзе TDE, наведайце http://l10n.kde.org

    " #: tdecore/kaboutdata.cpp:444 @@ -4309,8 +4309,8 @@ msgid "Code generation options file" msgstr "Файл параметраў стварэння коду" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:955 -msgid "KDE .kcfg compiler" -msgstr "Кампілятар файлаў .kcfg KDE" +msgid "TDE .kcfg compiler" +msgstr "Кампілятар файлаў .kcfg TDE" #: tdecore/kconfig_compiler/kconfig_compiler.cpp:956 msgid "KConfig Compiler" @@ -5487,31 +5487,31 @@ msgstr "Выпадаючы спіс && аўтаматычнае" #: tdeui/kaboutkde.cpp:34 msgid "" -"The K Desktop Environment is written and maintained by the KDE Team, a " +"The K Desktop Environment is written and maintained by the TDE Team, a " "world-wide network of software engineers committed to Free Software " "development." "
    " -"
    No single group, company or organization controls the KDE source code. " -"Everyone is welcome to contribute to KDE." +"
    No single group, company or organization controls the TDE source code. " +"Everyone is welcome to contribute to TDE." "
    " "
    Visit http://www.kde.org " -"for more information on the KDE project. " +"for more information on the TDE project. " msgstr "" -"Працоўнае асяроддзе KDE рапрацоўвае каманда KDE, міжнародная сетка " +"Працоўнае асяроддзе TDE рапрацоўвае каманда TDE, міжнародная сетка " "праграмістаў, якія прытрымліваюцца філасофіі свабоднага праграмнага" "забеспячэння." "
    " -"
    Ніводная група, кампанія ці арганізацыя не кіруе кодам KDE. Кожны чалавек " -"можа дапамагчы распрацоўцы KDE." +"
    Ніводная група, кампанія ці арганізацыя не кіруе кодам TDE. Кожны чалавек " +"можа дапамагчы распрацоўцы TDE." "
    " "
    Глядзіце http://www.kde.org" -", каб даведацца больш пра Праект KDE." +", каб даведацца больш пра Праект TDE." #: tdeui/kaboutkde.cpp:43 msgid "" -"Software can always be improved, and the KDE Team is ready to do so. However, " +"Software can always be improved, and the TDE Team is ready to do so. However, " "you - the user - must tell us when something does not work as expected or could " "be done better." "
    " @@ -5523,11 +5523,11 @@ msgid "" "bug tracking system to register your wish. Make sure you use the severity " "called \"Wishlist\"." msgstr "" -"Праграмнае забеспячэнне заўсёды можна паляпшаць, і каманда KDE гатовая да " +"Праграмнае забеспячэнне заўсёды можна паляпшаць, і каманда TDE гатовая да " "гэтага. Але вы - карыстальнікі - павінны паведамляць нам пра тое, што не " "працуе, ці тое, што павінна працаваць лепей." "
    " -"
    Працоўнае асяроддзе KDE мае сваю сістэму паведамлення пра памылкі. " +"
    Працоўнае асяроддзе TDE мае сваю сістэму паведамлення пра памылкі. " "Наведайце http://bugs.kde.org " "ці выкарыстайце элемент меню \"Паведаміць пра памылку...\" з меню \"Дапамога\", " "каб паведаміць пра памылку." @@ -5538,7 +5538,7 @@ msgstr "" #: tdeui/kaboutkde.cpp:54 msgid "" -"You do not have to be a software developer to be a member of the KDE team. You " +"You do not have to be a software developer to be a member of the TDE team. You " "can join the national teams that translate program interfaces. You can provide " "graphics, themes, sounds, and improved documentation. You decide!" "
    " @@ -5549,7 +5549,7 @@ msgid "" "HREF=\"http://developer.kde.org/\">http://developer.kde.org " "will provide you with what you need." msgstr "" -"Каб стаць сябрам каманды KDE, не абавязкова быць праграмістам. Вы можаце " +"Каб стаць сябрам каманды TDE, не абавязкова быць праграмістам. Вы можаце " "далучыцца да працы адной з камандаў перакладчыкаў. Вы можаце ствараць графічныя " "файлы, новыя тэмы, гукі, паляпшаць дакументацыю. Вы вырашаеце, як дапамагчы!" "
    " @@ -5561,32 +5561,32 @@ msgstr "" #: tdeui/kaboutkde.cpp:67 msgid "" -"KDE is available free of charge, but making it is not free." +"TDE is available free of charge, but making it is not free." "
    " -"
    Thus, the KDE team formed the KDE e.V., a non-profit organization legally " -"founded in Tuebingen, Germany. The KDE e.V. represents the KDE project in legal " +"
    Thus, the TDE team formed the TDE e.V., a non-profit organization legally " +"founded in Tuebingen, Germany. The TDE e.V. represents the TDE project in legal " "and financial matters. See " -"http://www.kde-ev.org for information on the KDE e.V." +"http://www.kde-ev.org for information on the TDE e.V." "
    " -"
    The KDE team does need financial support. Most of the money is used to " +"
    The TDE team does need financial support. Most of the money is used to " "reimburse members and others on expenses they experienced when contributing to " -"KDE. You are encouraged to support KDE through a financial donation, using one " +"TDE. You are encouraged to support TDE through a financial donation, using one " "of the ways described at " "http://www.kde.org/support/." "
    " "
    Thank you very much in advance for your support." msgstr "" -"KDE з'яўляецца бясплатным праграмным забеспячэннем, але яго стварэнне патрабуе " +"TDE з'яўляецца бясплатным праграмным забеспячэннем, але яго стварэнне патрабуе " "грашовых выдаткаў." "
    " -"
    Таму каманда KDE сфармавала KDE e.V., грамадскую арганізацыю, " -"зарэгістраваную ў Т'юбінге, у Нямеччыне. KDE e.V. прадстаўляе праект KDE у " +"
    Таму каманда TDE сфармавала TDE e.V., грамадскую арганізацыю, " +"зарэгістраваную ў Т'юбінге, у Нямеччыне. TDE e.V. прадстаўляе праект TDE у " "юрыдычных і фінансавых справах. Глядзіце на " -"http://www.kde-ev.org падрабязную інфармацыю пра KDE e.V." +"http://www.kde-ev.org падрабязную інфармацыю пра TDE e.V." "
    " -"
    Камандзе KDE неабходная фінансавая дапамога. Большасць грошай ідзе на " -"аплату працы сябраў каманды KDE. Вы можаце дапамагчы KDE грашыма, пералічыўшы " -"іх KDE e.V. адным са спосабаў, апісаных на Камандзе TDE неабходная фінансавая дапамога. Большасць грошай ідзе на " +"аплату працы сябраў каманды TDE. Вы можаце дапамагчы TDE грашыма, пералічыўшы " +"іх TDE e.V. адным са спосабаў, апісаных на http://www.kde.org/support/." "
    " "
    Вялікі дзякуй за падтрымку нашага праекта." @@ -5594,11 +5594,11 @@ msgstr "" #: tdeui/kaboutkde.cpp:81 #, c-format msgid "K Desktop Environment. Release %1" -msgstr "Працоўнае асяроддзе KDE. Выпуск %1" +msgstr "Працоўнае асяроддзе TDE. Выпуск %1" #: tdeui/kaboutkde.cpp:83 msgid "" -"_: About KDE\n" +"_: About TDE\n" "&About" msgstr "&Аб" @@ -5607,12 +5607,12 @@ msgid "&Report Bugs or Wishes" msgstr "&Паведаміць пра памылкі ці пажаданні" #: tdeui/kaboutkde.cpp:85 -msgid "&Join the KDE Team" -msgstr "&Далучыцца да каманды KDE" +msgid "&Join the TDE Team" +msgstr "&Далучыцца да каманды TDE" #: tdeui/kaboutkde.cpp:86 -msgid "&Support KDE" -msgstr "&Падтрымаць KDE" +msgid "&Support TDE" +msgstr "&Падтрымаць TDE" #: tdeui/kstdguiitem.cpp:110 khtml/java/kjavaappletserver.cpp:804 msgid "&Yes" @@ -6498,8 +6498,8 @@ msgid "&About %1" msgstr "&Аб %1" #: tdeui/khelpmenu.cpp:176 tdeui/kstdaction_p.h:114 -msgid "About &KDE" -msgstr "Аб &KDE" +msgid "About &TDE" +msgstr "Аб &TDE" #: tdeui/kactionclasses.cpp:2072 msgid "Exit F&ull Screen Mode" @@ -6626,8 +6626,8 @@ msgid "Task" msgstr "Заданне" #: tdeui/kaboutdialog.cpp:704 -msgid "%1 %2 (Using KDE %3)" -msgstr "%1 %2 (выкарыстоўваецца KDE %3)" +msgid "%1 %2 (Using TDE %3)" +msgstr "%1 %2 (выкарыстоўваецца TDE %3)" #: tdeui/kaboutdialog.cpp:706 msgid "%1 %2, %3" @@ -7338,8 +7338,8 @@ msgid "" msgstr "" #: khtml/khtml_part.cpp:4870 -msgid "KDE" -msgstr "KDE" +msgid "TDE" +msgstr "TDE" #: khtml/khtml_part.cpp:5776 msgid "(%1/s)" @@ -7706,8 +7706,8 @@ msgid "Archives" msgstr "Архівы" #: khtml/java/kjavaappletviewer.cpp:451 -msgid "KDE Java Applet Plugin" -msgstr "Утулка аплетаў Java для KDE" +msgid "TDE Java Applet Plugin" +msgstr "Утулка аплетаў Java для TDE" #: khtml/java/kjavaapplet.cpp:225 msgid "Initializing Applet \"%1\"..." @@ -7894,8 +7894,8 @@ msgid "" msgstr "" #: kinit/klauncher.cpp:743 -msgid "KDEInit could not launch '%1'." -msgstr "KDEInit не можа выканаць '%1'." +msgid "TDEInit could not launch '%1'." +msgstr "TDEInit не можа выканаць '%1'." #: kinit/klauncher.cpp:918 kinit/klauncher.cpp:943 kinit/klauncher.cpp:960 msgid "Could not find service '%1'." @@ -7943,8 +7943,8 @@ msgid "KConf Update" msgstr "Абнаўленне KConf" #: kconf_update/kconf_update.cpp:945 -msgid "KDE Tool for updating user configuration files" -msgstr "Інструмент KDE для абнаўлення файлаў настаўлення" +msgid "TDE Tool for updating user configuration files" +msgstr "Інструмент TDE для абнаўлення файлаў настаўлення" #: kspell2/ui/configdialog.cpp:38 msgid "KSpell2 Configuration" @@ -7979,12 +7979,12 @@ msgid "Web style plugin" msgstr "Утулка стылю Web" #: kstyles/klegacy/plugin.cpp:28 -msgid "KDE LegacyStyle plugin" -msgstr "Утулка старога стылю KDE" +msgid "TDE LegacyStyle plugin" +msgstr "Утулка старога стылю TDE" #: kstyles/utils/installtheme/main.cpp:35 -msgid "KDE Tool to build a cache list of all pixmap themes installed" -msgstr "Інструмент KDE для стварэння кэшу ўсіх тэмаў значак" +msgid "TDE Tool to build a cache list of all pixmap themes installed" +msgstr "Інструмент TDE для стварэння кэшу ўсіх тэмаў значак" #: kstyles/utils/installtheme/main.cpp:40 msgid "KInstalltheme" @@ -8329,7 +8329,7 @@ msgid "" "
    %1" "

    Possible reasons:

    " "
      " -"
    • An error occurred during your last KDE upgrade leaving an orphaned control " +"
    • An error occurred during your last TDE upgrade leaving an orphaned control " "module" "
    • You have old third party modules lying around.
    " "

    Check these points carefully and try to remove the module mentioned in the " @@ -8520,8 +8520,8 @@ msgid "kcmkresources" msgstr "kcmkresources" #: kresources/kcmkresources.cpp:45 -msgid "KDE Resources configuration module" -msgstr "Модуль настаўлення рэсурсаў KDE" +msgid "TDE Resources configuration module" +msgstr "Модуль настаўлення рэсурсаў TDE" #: kresources/kcmkresources.cpp:47 msgid "(c) 2003 Tobias Koenig" @@ -8703,7 +8703,7 @@ msgstr "Бракуе памяці" msgid "" "Your local kab configuration file \"%1\" could not be created. kab will " "probably not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" @@ -8711,7 +8711,7 @@ msgstr "" msgid "" "Your standard kab database file \"%1\" could not be created. kab will probably " "not work correctly without it.\n" -"Make sure you have not removed write permission from your local KDE directory " +"Make sure you have not removed write permission from your local TDE directory " "(usually ~/.kde)." msgstr "" @@ -9011,8 +9011,8 @@ msgid "Import &All" msgstr "Імпартаваць &усе" #: kcert/kcertpart.cc:183 kcert/kcertpart.cc:274 kcert/kcertpart.cc:359 -msgid "KDE Secure Certificate Import" -msgstr "Імпартаванне сертыфікатаў бяспекі KDE" +msgid "TDE Secure Certificate Import" +msgstr "Імпартаванне сертыфікатаў бяспекі TDE" #: kcert/kcertpart.cc:184 msgid "Chain:" @@ -9103,8 +9103,8 @@ msgid "Certificate Import" msgstr "Імпарт сертыфікату" #: kcert/kcertpart.cc:455 -msgid "You do not seem to have compiled KDE with SSL support." -msgstr "Вы не ўключылі падтрымку SSL пры кампіляцыі KDE." +msgid "You do not seem to have compiled TDE with SSL support." +msgstr "Вы не ўключылі падтрымку SSL пры кампіляцыі TDE." #: kcert/kcertpart.cc:460 msgid "Certificate file is empty." @@ -9142,23 +9142,23 @@ msgstr "Сертыфікат з такой назвай ужо існуе. Вы #: kcert/kcertpart.cc:741 kcert/kcertpart.cc:759 msgid "" -"Certificate has been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificate has been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Сертыфікат паспяхова імпартаваны ў KDE.\n" -"Вы можаце змяняць настаўленні сертыфікатаў у Цэнтры кіравання KDE." +"Сертыфікат паспяхова імпартаваны ў TDE.\n" +"Вы можаце змяняць настаўленні сертыфікатаў у Цэнтры кіравання TDE." #: kcert/kcertpart.cc:873 msgid "" -"Certificates have been successfully imported into KDE.\n" -"You can manage your certificate settings from the KDE Control Center." +"Certificates have been successfully imported into TDE.\n" +"You can manage your certificate settings from the TDE Control Center." msgstr "" -"Сертыфікаты паспяхова імпартаваныя ў KDE.\n" -"Вы можаце змяняць настаўленні сертыфікатаў у Цэнтры кіравання KDE." +"Сертыфікаты паспяхова імпартаваныя ў TDE.\n" +"Вы можаце змяняць настаўленні сертыфікатаў у Цэнтры кіравання TDE." #: kcert/kcertpart.cc:879 -msgid "KDE Certificate Part" -msgstr "Модуль сертыфікатаў KDE" +msgid "TDE Certificate Part" +msgstr "Модуль сертыфікатаў TDE" #: khtml/khtml_settings.cc:152 msgid "Accept" @@ -9345,12 +9345,12 @@ msgid "expand ${prefix} and ${exec_prefix} in output" msgstr "разгарнуць ${prefix} і ${exec_prefix} у вывадзе" #: tdecore/tde-config.cpp.in:19 -msgid "Compiled in prefix for KDE libraries" -msgstr "Убудаваны prefix для бібліятэк KDE" +msgid "Compiled in prefix for TDE libraries" +msgstr "Убудаваны prefix для бібліятэк TDE" #: tdecore/tde-config.cpp.in:20 -msgid "Compiled in exec_prefix for KDE libraries" -msgstr "Убудаваны exec_prefix для бібліятэк KDE" +msgid "Compiled in exec_prefix for TDE libraries" +msgstr "Убудаваны exec_prefix для бібліятэк TDE" #: tdecore/tde-config.cpp.in:21 msgid "Compiled in library path suffix" @@ -9361,12 +9361,12 @@ msgid "Prefix in $HOME used to write files" msgstr "Пачатак шляху адносна $HOME для запісу файлаў" #: tdecore/tde-config.cpp.in:23 -msgid "Compiled in version string for KDE libraries" -msgstr "Убудаваны радок версіі для бібліятэк KDE" +msgid "Compiled in version string for TDE libraries" +msgstr "Убудаваны радок версіі для бібліятэк TDE" #: tdecore/tde-config.cpp.in:24 -msgid "Available KDE resource types" -msgstr "Наяўныя тыпы рэсурсаў KDE" +msgid "Available TDE resource types" +msgstr "Наяўныя тыпы рэсурсаў TDE" #: tdecore/tde-config.cpp.in:25 msgid "Search path for resource type" diff --git a/tde-i18n-be/messages/tdelibs/tdeprint.po b/tde-i18n-be/messages/tdelibs/tdeprint.po index e1de545e0a1..822e8fbe3e1 100644 --- a/tde-i18n-be/messages/tdelibs/tdeprint.po +++ b/tde-i18n-be/messages/tdelibs/tdeprint.po @@ -1,6 +1,6 @@ # translation of tdeprint.po to # Belarusian (classic spelling) translation of tdeprint.pot -# Copyright (C) 2003-2004 KDE Team. +# Copyright (C) 2003-2004 TDE Team. # # Eugene Zelenko , 2003-2004. # Ihar Hrachyshka , 2006. @@ -489,13 +489,13 @@ msgstr "" msgid "" " Printer Selection Menu: " "

    Use this combo box to select the printer to which you want to print. " -"Initially (if you run KDEPrint for the first time), you may only find the " -"KDE special printers (which save jobs to disk [as PostScript- or " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

      " "
    • ...either create a local printer with the help of the " -"KDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " +"TDE Add Printer Wizard. The Wizard is available for the CUPS and RLPR " "printing systems (click button to the left of the 'Properties' " "button),
      • " "
    • ...or try to connect to an existing remote CUPS print server. You can " @@ -503,7 +503,7 @@ msgid "" "opens: click on the 'CUPS server' icon: Fill in the information " "required to use the remote server.
    " "

    Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force KDEPrint to " +"server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " @@ -527,7 +527,7 @@ msgid "" "

    To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " -"KDE Print Configuration dialog) and setup your selection..

    " +"TDE Print Configuration dialog) and setup your selection..

    " "

    Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

    " @@ -535,11 +535,11 @@ msgstr "" #: kprintdialog.cpp:154 msgid "" -"KDE Add Printer Wizard " -"

    This button starts the KDE Add Printer Wizard.

    " +"TDE Add Printer Wizard " +"

    This button starts the TDE Add Printer Wizard.

    " "

    Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

    " -"

    Note: The KDE Add Printer Wizard does not " +"

    Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

    " msgstr "" @@ -564,17 +564,17 @@ msgid "" "

    This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

      " -"
    • Should KDE applications embed all fonts into the PostScript they generate " +"
    • Should TDE applications embed all fonts into the PostScript they generate " "for printing? " -"
    • Should KDE use an external PostScript viewer like gv " +"
    • Should TDE use an external PostScript viewer like gv " "for print page previews? " -"
    • Should KDEPrint use a local or a remote CUPS server?,
    " +"
  • Should TDEPrint use a local or a remote CUPS server?, " "and many more.... " msgstr "" #: kprintdialog.cpp:182 msgid "" -" Help: This button takes you to the complete KDEPrint Manual" +" Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" @@ -587,7 +587,7 @@ msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want KDE to convert " +"are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" @@ -607,7 +607,7 @@ msgstr "" msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " -"of the KDE Special Printers named \"Print to File (PostScript)\" or " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" @@ -645,9 +645,9 @@ msgid "" "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

    Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" @@ -786,7 +786,7 @@ msgid "" "secretaries who serve different bosses, etc.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"

    " @@ -810,7 +810,7 @@ msgid "" "trays).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "

    " @@ -825,7 +825,7 @@ msgid "" "

    They contain any string you type into the line edit field.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-label=\"...\"      # example: \"Company Confidential\"
    " "

    " @@ -847,7 +847,7 @@ msgid "" "no other, higher prioritized one is present).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
    " "

    " @@ -1251,7 +1251,7 @@ msgid "" "

    The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o cpi=...          # example: \"8\" or \"12\"

    " msgstr "" @@ -1265,7 +1265,7 @@ msgid "" "

    The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o lpi=...         # example \"5\" or \"7\"

    " msgstr "" @@ -1279,7 +1279,7 @@ msgid "" "

    The default value is 1, meaning that only one column of text per page will " "be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o columns=...     # example: \"2\" or \"4\"

    " msgstr "" @@ -1295,11 +1295,11 @@ msgid "" "

    These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

    " "

    Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

    . " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o cpi=...         # example: \"8\" or \"12\"  "
 "
         -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1312,9 +1312,9 @@ msgid ""
 "
    Margins
      "
 "
    These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). 
      "
-"
    When printing from KDE applications, such as KMail and Konqueror, or "
+"
    When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. 
      "
 "
    Margins may be set individually for each edge of the paper. The combo box at "
@@ -1323,7 +1323,7 @@ msgid ""
 "
    You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). 
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o page-top=...      # example: \"72\"  "
 "
         -o page-bottom=...   # example: \"24\"  "
@@ -1344,7 +1344,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  
     
      "
 msgstr ""
@@ -1358,7 +1358,7 @@ msgid ""
 "margins, though.) 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o prettyprint=false  
     
      "
 msgstr ""
@@ -1376,7 +1376,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  "
 "
         -o prettyprint=false  
     
      "
@@ -1441,7 +1441,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "
       "
 "
    • Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. 
      •  "
+"TDEPrint GUI.  "
 "
    • Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.
      •   "
 "
    • Send short messages to the operators of your production printers in your  "
@@ -1475,7 +1475,7 @@ msgid ""
 "
      Note: the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "
      Warning: Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) 
        "
@@ -1664,7 +1664,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o blackplot=true  
        
        "
 msgstr ""
@@ -1684,7 +1684,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
           -o fitplot=true   
       
        "
 msgstr ""
@@ -1701,7 +1701,7 @@ msgid ""
 "set inside  the plot file itself..
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
          -o penwidth=...   # example: \"2000\" or \"500\"  
       
        "
 msgstr ""
@@ -1709,11 +1709,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 "   HP-GL Print Options  "
-"
      All options on this page are only applicable if you use KDEPrint to send "
+"
      All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. 
        "
 "
      HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. 
        "
-"
      KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"
      TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. 
        "
 "
      Note 1: To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.
       "
@@ -1722,7 +1722,7 @@ msgid ""
 "1.1.22).
        "
 "
        "
 "
        "
-"
      Additional hint for power users: These KDEPrint GUI elements "
+"
      Additional hint for power users: These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:  "
 "
           -o blackplot=...  # examples: \"true\" or \"false\"  "
 "
           -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -1952,7 +1952,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o brightness=...      # use range from \"0\" to \"200\"  
        
        "
 ""
@@ -1996,7 +1996,7 @@ msgid ""
 "Light-navy-blue       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o hue=...     # use range from \"-360\" to \"360\"  
       
        "
 msgstr ""
@@ -2014,7 +2014,7 @@ msgid ""
 "make the colors extremely intense. 
       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o saturation=...      # use range from \"0\" to \"200\"  
       
        "
 ""
@@ -2031,7 +2031,7 @@ msgid ""
 "preview. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o gamma=...      # use range from \"1\" to \"3000\"  
       
        "
 ""
@@ -2102,7 +2102,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o natural-scaling=...     # range in  %  is 1....800  "
 "
         -o scaling=...             # range in  %  is 1....800  "
@@ -2150,7 +2150,7 @@ msgid ""
 "paper printout. Default  is 'center'. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o position=...       # examples: \"top-left\" or \"bottom\"  
     "
 "
      "
@@ -2962,9 +2962,9 @@ msgstr "&Выкарыстоўваць знешнюю праграму прагл
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 
 #: management/kmwdrivertest.cpp:41
@@ -3028,8 +3028,8 @@ msgstr ""
 "
    %1
    "
 
 #: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "Настаўленні друку KDE"
+msgid "Configure TDE Print"
+msgstr "Настаўленні друку TDE"
 
 #: management/kaddprinterwizard.cpp:11
 msgid "Configure print server"
@@ -3058,9 +3058,9 @@ msgid ""
 msgstr ""
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
+msgid "Please wait while TDE rebuilds a driver database."
 msgstr ""
-"Калі ласка, пачакайце, пакуль KDE перабудоўвае базу звестак аб драйверах."
+"Калі ласка, пачакайце, пакуль TDE перабудоўвае базу звестак аб драйверах."
 
 #: management/kmdbcreator.cpp:114
 msgid "Driver Database"
@@ -3130,8 +3130,8 @@ msgid "Change..."
 msgstr "Змяніць..."
 
 #: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "Наставіць друк KDE"
+msgid "TDE Print Configuration"
+msgstr "Наставіць друк TDE"
 
 #: management/kmwdriver.cpp:33
 msgid "Printer Model Selection"
@@ -3284,7 +3284,7 @@ msgstr " сек."
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various KDE Print "
+"This time setting controls the refresh rate of various TDE Print "
 "components like the print manager and the job viewer."
 msgstr ""
 
@@ -3427,7 +3427,7 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
@@ -3779,7 +3779,7 @@ msgid ""
 "
    "
 "
    We hope you'll enjoy this tool!
    "
 "
    "
-"The KDE printing team.
    "
+"The TDE printing team.
    "
 msgstr ""
 
 #: management/kmdriverdbwidget.cpp:51
@@ -4217,7 +4217,7 @@ msgid ""
 "  File Open button "
 "
    This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.
     "
-"
    If you open files, KDEPrint will use the application matching the MIME type "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.
         "
 msgstr ""
 
@@ -4226,7 +4226,7 @@ msgid ""
 "  File List view "
 "
    This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.
     "
 "
    The files will be printed as a single job, in the same order as displayed in "
 "the list.
     "
@@ -4234,7 +4234,7 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.
     "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
 "    "
 msgstr ""
 
@@ -4268,8 +4268,8 @@ msgstr ""
 msgid ""
 " Print Subsystem Selection "
 "
    This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the "
 "Common UNIX Printing System. "
 msgstr ""
@@ -4311,7 +4311,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
          "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: driverview.cpp:71
@@ -4336,7 +4336,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: kprinter.cpp:280
@@ -4393,7 +4393,7 @@ msgstr "Паралельны порт #%1"
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, c-format
-msgid "Unable to load KDE print management library: %1"
+msgid "Unable to load TDE print management library: %1"
 msgstr "Немагчыма адкрыць бібліятэчны файл кіравання друкам: %1"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
@@ -4420,8 +4420,8 @@ msgstr "Аддаленая чарга друку на %1"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
 
@@ -4451,7 +4451,7 @@ msgstr ""
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (tdeprintd) could not be contacted. Check that this "
+"The TDE print server (tdeprintd) could not be contacted. Check that this "
 "server is running."
 msgstr ""
 
@@ -4491,7 +4491,7 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?
    "
+"file). Do you want TDE to convert the file to a supported format?
    "
 msgstr ""
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -4538,12 +4538,12 @@ msgid ""
 "The file format  %1  is not directly supported by the current "
 "print system. You now have 3 options: "
 "
       "
-"
    •  KDE can attempt to convert this file automatically to a supported format. "
+"
    •  TDE can attempt to convert this file automatically to a supported format. "
 "(Select Convert) 
      • "
 "
    •  You can try to send the file to the printer without any conversion. "
 "(Select Keep) 
      • "
 "
    •  You can cancel the printjob. (Select Cancel) 
     "
-"Do you want KDE to attempt and convert this file to %2?    "
+"Do you want TDE to attempt and convert this file to %2?"
 msgstr ""
 
 #: kprinterimpl.cpp:518
@@ -4636,7 +4636,7 @@ msgid ""
 "installed.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o PageSize=...         # examples: \"A4\" or \"Letter\"  
     
      "
 ""
@@ -4651,7 +4651,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o MediaType=...        # example: \"Transparency\"  
     
      "
 msgstr ""
@@ -4665,7 +4665,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "
     
      "
@@ -4687,7 +4687,7 @@ msgid ""
 "down.
    • The icon changes according to your selection.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"

    " @@ -4713,7 +4713,7 @@ msgid "" "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled). " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 "

    " @@ -4738,7 +4738,7 @@ msgid "" "

    CUPS comes with a selection of banner pages.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "

    " @@ -4759,7 +4759,7 @@ msgid "" "sheet in both places, your printout will not look as you intended.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" @@ -4869,7 +4869,7 @@ msgstr "%1: адбылася памылка выканання, паве #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" @@ -4914,9 +4914,9 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " -"if you want to print the page currently visible in your KDE application.

    " -"

    Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.

    " +"

    Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

    " msgstr "" @@ -4930,7 +4930,7 @@ msgid "" "document.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
    " "

    " @@ -4954,7 +4954,7 @@ msgid "" "model).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-set=...        # example: \"odd\" or \"even\"

    " "    " @@ -4969,7 +4969,7 @@ msgid "" "

    The 'Copies' setting defaults to 1.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o copies=...            # examples: \"5\" or \"42\"  "
 "
         -o outputorder=...       # example:  \"reverse\" "
@@ -4984,7 +4984,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o copies=...            # examples: \"5\" or \"42\"  
     
      "
 ""
@@ -5001,7 +5001,7 @@ msgid ""
 "3-3-3-...\".
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o Collate=...           # example:  \"true\" or \"false\"  
     
      "
 ""
@@ -5020,7 +5020,7 @@ msgid ""
 "checkbox at the same time. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o outputorder=...       # example:  \"reverse\"  
     
      "
 msgstr ""
@@ -5103,14 +5103,14 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
 
 #: kprintpreview.cpp:314
@@ -5170,7 +5170,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     
      "
@@ -5191,7 +5191,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5212,7 +5212,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5233,7 +5233,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5261,7 +5261,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. 
      "
 msgstr ""
 
@@ -5316,9 +5316,9 @@ msgstr "JCL"
 #: kmvirtualmanager.cpp:161
 msgid ""
 "You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set %1 as your personal default?"
 msgstr ""
 
@@ -5335,7 +5335,7 @@ msgid ""
 "here, the 'Poster Printing' filter will be auto-loaded in  the "
 "'Filters' tab of this dialog. 
     "
 "
    This tab is only visible if the external 'poster' "
-"utility is  discovered by KDEPrint on your system. ['poster' "
+"utility is  discovered by TDEPrint on your system. ['poster' "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] 
     "
@@ -5343,7 +5343,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. 
     "
 "
    Additional hint for power users: A patched version of 'poster' is  "
-"available from the KDEPrint Website  "
+"available from the TDEPrint Website  "
 "at http://printing.kde.org/downloads/.  The direct link to the patched source tarball is   Add Filter button "
 "
    This button calls a little dialog to let you select a filter here. 
     "
 "
    Note 1: You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.
      "
 "
    Note 2: The filters you define here are applied to your jobfile  "
 "before it is handed downstream to your spooler and print  subsystem "
@@ -5546,7 +5546,7 @@ msgid ""
 "
    This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "
        "
-"
    • the filter name (as displayed in the KDEPrint user interface); "
+"
    • the filter name (as displayed in the TDEPrint user interface); "
 "
      •   "
 "
    • the filter requirements (that is the external program that needs  "
 "to present and executable on this system); 
      •   "
@@ -5563,7 +5563,7 @@ msgid ""
 "  Filtering Chain (if enabled, is run before "
 "actual  job submission to print system) "
 "
      This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
 "before they are  send downstream to your real print subsystem. 
        "
 "
      The list shown in this field may be empty (default). 
        "
 "
      The pre-filters act on the printjob in the order they are listed (from top "
@@ -5573,13 +5573,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. 
        "
-"
      KDEPrint can utilize any external filtering program which you may "
+"
      TDEPrint can utilize any external filtering program which you may "
 "find useful  through this interface. 
        "
-"
      KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+"
      TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.
       ."
-"
       Amongst the pre-configured filters shipping with KDEPrint are: 
        "
+"
       Amongst the pre-configured filters shipping with TDEPrint are: 
        "
 "
          "
 "
      • the Enscript text filter  
        •   "
 "
      • a Multiple Pages per Sheet filter  "
@@ -5590,7 +5590,7 @@ msgid ""
 "click on the funnel icon (topmost on  the right icon column group) and "
 "proceed. 
         "
 "
        Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  
         "
+"TDEPrint  pre-filters.  
         "
 msgstr ""
 
 #: kpfilterpage.cpp:125
@@ -5637,7 +5637,7 @@ msgid ""
 "
          "
 "
        • Color and
          •   "
 "
        • Grayscale
          Note: This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  "
-- 
cgit v1.2.1