From 9b58d35185905f8334142bf4988cb784e993aea7 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Mon, 21 Nov 2011 02:23:03 -0600 Subject: Initial import of extracted KDE i18n tarballs --- tde-i18n-is/messages/kdesdk/kcachegrind.po | 2571 ++++++++++++++++++++++++++++ 1 file changed, 2571 insertions(+) create mode 100644 tde-i18n-is/messages/kdesdk/kcachegrind.po (limited to 'tde-i18n-is/messages/kdesdk/kcachegrind.po') diff --git a/tde-i18n-is/messages/kdesdk/kcachegrind.po b/tde-i18n-is/messages/kdesdk/kcachegrind.po new file mode 100644 index 00000000000..4fe2407a919 --- /dev/null +++ b/tde-i18n-is/messages/kdesdk/kcachegrind.po @@ -0,0 +1,2571 @@ +# Translation of kcachegrind.po to Icelandic +# Copyright (C) 2001,2003, 2004 Free Software Foundation, Inc. +# Richard Allen , 2004. +# +msgid "" +msgstr "" +"Project-Id-Version: kcachegrind\n" +"POT-Creation-Date: 2008-07-08 01:21+0200\n" +"PO-Revision-Date: 2004-05-21 17:15+0000\n" +"Last-Translator: Richard Allen \n" +"Language-Team: Icelandic \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: instritem.cpp:106 sourceitem.cpp:86 +msgid "Active call to '%1'" +msgstr "" + +#: instritem.cpp:108 sourceitem.cpp:88 +msgid "" +"_n: %n call to '%1'\n" +"%n calls to '%1'" +msgstr "" + +#: instritem.cpp:137 +msgid "Jump %1 of %2 times to 0x%3" +msgstr "" + +#: instritem.cpp:142 +msgid "Jump %1 times to 0x%2" +msgstr "" + +#: instritem.cpp:185 sourceitem.cpp:169 +msgid "(cycle)" +msgstr "" + +#: tracedata.cpp:157 +msgid "Abstract Item" +msgstr "" + +#: tracedata.cpp:158 +msgid "Cost Item" +msgstr "" + +#: tracedata.cpp:159 +msgid "Part Source Line" +msgstr "" + +#: tracedata.cpp:160 +msgid "Source Line" +msgstr "" + +#: tracedata.cpp:161 +msgid "Part Line Call" +msgstr "" + +#: tracedata.cpp:162 +msgid "Line Call" +msgstr "" + +#: tracedata.cpp:163 +msgid "Part Jump" +msgstr "" + +#: tracedata.cpp:164 +msgid "Jump" +msgstr "" + +#: tracedata.cpp:165 +msgid "Part Instruction" +msgstr "" + +#: tracedata.cpp:166 +msgid "Instruction" +msgstr "" + +#: tracedata.cpp:167 +msgid "Part Instruction Jump" +msgstr "" + +#: tracedata.cpp:168 +msgid "Instruction Jump" +msgstr "" + +#: tracedata.cpp:169 +msgid "Part Instruction Call" +msgstr "" + +#: tracedata.cpp:170 +msgid "Instruction Call" +msgstr "" + +#: tracedata.cpp:171 +msgid "Part Call" +msgstr "" + +#: tracedata.cpp:172 +msgid "Call" +msgstr "" + +#: tracedata.cpp:173 +msgid "Part Function" +msgstr "" + +#: tracedata.cpp:174 +msgid "Function Source File" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 300 +#: rc.cpp:144 rc.cpp:273 rc.cpp:318 rc.cpp:342 tracedata.cpp:175 +#, no-c-format +msgid "Function" +msgstr "" + +#: tracedata.cpp:176 +msgid "Function Cycle" +msgstr "" + +#: tracedata.cpp:177 +msgid "Part Class" +msgstr "" + +#: tracedata.cpp:178 +msgid "Class" +msgstr "" + +#: tracedata.cpp:179 +msgid "Part Source File" +msgstr "" + +#: tracedata.cpp:180 +msgid "Source File" +msgstr "" + +#: tracedata.cpp:181 +msgid "Part ELF Object" +msgstr "" + +#: tracedata.cpp:182 +msgid "ELF Object" +msgstr "" + +#: partview.cpp:46 tracedata.cpp:183 +msgid "Profile Part" +msgstr "" + +#: tracedata.cpp:184 +msgid "Program Trace" +msgstr "" + +#: tracedata.cpp:245 +msgid "%1 from %2" +msgstr "" + +#: partgraph.cpp:423 tracedata.cpp:253 tracedata.cpp:258 tracedata.cpp:2828 +#: tracedata.cpp:3245 tracedata.cpp:3331 tracedata.cpp:4169 tracedata.cpp:4177 +#: tracedata.cpp:4242 +msgid "(unknown)" +msgstr "" + +#: tracedata.cpp:2587 +msgid "(no caller)" +msgstr "" + +#: tracedata.cpp:2594 tracedata.cpp:2613 +msgid "%1 via %2" +msgstr "" + +#: tracedata.cpp:2603 +msgid "(no callee)" +msgstr "" + +#: tracedata.cpp:4471 +msgid "(not found)" +msgstr "" + +#: tracedata.cpp:5021 +msgid "Recalculating Function Cycles..." +msgstr "" + +#. i18n: file dumpselectionbase.ui line 550 +#: callmapview.cpp:59 partselection.cpp:58 rc.cpp:192 +#, no-c-format +msgid "Name" +msgstr "" + +#. i18n: file stackselectionbase.ui line 31 +#: callmapview.cpp:60 callview.cpp:44 instrview.cpp:126 partselection.cpp:59 +#: rc.cpp:333 sourceview.cpp:51 +#, no-c-format +msgid "Cost" +msgstr "" + +#: partselection.cpp:151 +msgid "Profile Part Overview: Current is '%1'" +msgstr "" + +#: partselection.cpp:287 +msgid "Deselect" +msgstr "" + +#: partselection.cpp:287 partselection.cpp:311 +msgid "Select" +msgstr "" + +#: partselection.cpp:292 +msgid "Select All Parts" +msgstr "" + +#: partselection.cpp:294 +msgid "Visible Parts" +msgstr "" + +#: partselection.cpp:296 +msgid "Hide Selected Parts" +msgstr "" + +#: partselection.cpp:297 +msgid "Unhide Hidden Parts" +msgstr "" + +#: partselection.cpp:302 toplevel.cpp:1692 +msgid "Go Back" +msgstr "" + +#: callgraphview.cpp:2571 partselection.cpp:320 +msgid "Visualization" +msgstr "" + +#: partselection.cpp:322 +msgid "Partitioning Mode" +msgstr "" + +#: partselection.cpp:323 +msgid "Diagram Mode" +msgstr "" + +#: partselection.cpp:324 +msgid "Zoom Function" +msgstr "" + +#: partselection.cpp:325 +msgid "Show Direct Calls" +msgstr "" + +#: partselection.cpp:326 +msgid "Increment Shown Call Levels" +msgstr "" + +#: partselection.cpp:340 +msgid "Draw Names" +msgstr "" + +#: partselection.cpp:341 +msgid "Draw Costs" +msgstr "" + +#: callmapview.cpp:303 partselection.cpp:342 +msgid "Ignore Proportions" +msgstr "" + +#: partselection.cpp:343 +msgid "Draw Frames" +msgstr "" + +#: callmapview.cpp:304 partselection.cpp:344 treemap.cpp:2887 +msgid "Allow Rotation" +msgstr "" + +#: partselection.cpp:359 +msgid "Hide Info" +msgstr "" + +#: partselection.cpp:361 +msgid "Show Info" +msgstr "" + +#: partselection.cpp:541 +msgid "(no trace loaded)" +msgstr "" + +#: costtypeview.cpp:42 +msgid "Event Type" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 917 +#: costtypeview.cpp:43 coverageview.cpp:46 partview.cpp:47 rc.cpp:267 +#: rc.cpp:309 +#, no-c-format +msgid "Incl." +msgstr "" + +#. i18n: file functionselectionbase.ui line 62 +#: costtypeview.cpp:44 coverageview.cpp:53 partview.cpp:48 rc.cpp:303 +#: rc.cpp:312 +#, no-c-format +msgid "Self" +msgstr "" + +#: costtypeview.cpp:45 +msgid "Short" +msgstr "" + +#: costtypeview.cpp:47 +msgid "Formula" +msgstr "" + +#: costtypeview.cpp:81 +msgid "" +"Cost Types List" +"

This list shows all cost types available and what the self/inclusive cost of " +"the current selected function is for that cost type.

" +"

By choosing a cost type from the list, you change the cost type of costs " +"shown all over KCachegrind to be the selected one.

" +msgstr "" + +#: costtypeview.cpp:98 +msgid "Set Secondary Event Type" +msgstr "" + +#: costtypeview.cpp:100 +msgid "Remove Secondary Event Type" +msgstr "" + +#: costtypeview.cpp:105 +msgid "Edit Long Name" +msgstr "" + +#: costtypeview.cpp:106 +msgid "Edit Short Name" +msgstr "" + +#: costtypeview.cpp:107 +msgid "Edit Formula" +msgstr "" + +#: costtypeview.cpp:115 +msgid "New Cost Type ..." +msgstr "" + +#: costtypeview.cpp:149 costtypeview.cpp:154 +#, c-format +msgid "New%1" +msgstr "" + +#: costtypeview.cpp:155 +#, c-format +msgid "New Cost Type %1" +msgstr "" + +#: sourceitem.cpp:125 +msgid "Jump %1 of %2 times to %3" +msgstr "" + +#: sourceitem.cpp:130 +msgid "Jump %1 times to %2" +msgstr "" + +#: costlistitem.cpp:60 +#, c-format +msgid "" +"_n: (%n item skipped)\n" +"(%n items skipped)" +msgstr "" + +#: traceitemview.cpp:53 +msgid "No description available" +msgstr "" + +#. i18n: file partselectionbase.ui line 16 +#: rc.cpp:324 toplevel.cpp:281 toplevel.cpp:581 +#, no-c-format +msgid "Parts Overview" +msgstr "" + +#: toplevel.cpp:288 +msgid "" +"The Parts Overview" +"

A trace consists of multiple trace parts when there are several profile data " +"files from one profile run. The Trace Part Overview dockable shows these, " +"horizontally ordered in execution time; the rectangle sizes are proportional to " +"the total cost spent in the parts. You can select one or several parts to " +"constrain all costs shown to these parts only.

" +"

The parts are further subdivided: there is a partitioning and an callee " +"split mode: " +"

    " +"
  • Partitioning: You see the partitioning into groups for a trace part, " +"according to the group type selected. E.g. if ELF object groups are selected, " +"you see colored rectangles for each used ELF object (shared library or " +"executable), sized according to the cost spent therein.
    • " +"
  • Callee: A rectangle showing the inclusive cost of the current selected " +"function in the trace part is shown. This is split up into smaller rectangles " +"to show the costs of its callees.

" +msgstr "" + +#: toplevel.cpp:318 +msgid "Top Cost Call Stack" +msgstr "" + +#: toplevel.cpp:320 +msgid "" +"The Top Cost Call Stack" +"

This is a purely fictional 'most probable' call stack. It is built up by " +"starting with the current selected function and adds the callers/callees with " +"highest cost at the top and to bottom.

" +"

The Cost and Calls columns show the cost used for all calls " +"from the function in the line above.

" +msgstr "" + +#: toplevel.cpp:333 +msgid "Flat Profile" +msgstr "" + +#: toplevel.cpp:343 +msgid "" +"The Flat Profile" +"

The flat profile contains a group and a function selection list. The group " +"list contains all groups where costs are spent in, depending on the chosen " +"group type. The group list is hidden when group type 'Function' is selected." +"

" +"

The function list contains the functions of the selected group (or all for " +"'Function' group type), ordered by the costs spent therein. Functions with " +"costs less than 1% are hidden on default.

" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 16 +#: rc.cpp:84 toplevel.cpp:357 toplevel.cpp:609 +#, no-c-format +msgid "Profile Dumps" +msgstr "" + +#: toplevel.cpp:367 +msgid "" +"Profile Dumps" +"

This dockable shows in the top part the list of loadable profile dumps in " +"all subdirectories of: " +"

    " +"
  • current working directory of KCachegrind, i.e. where it was started from, " +"and " +"
  • the default profile dump directory given in the configuration.
" +"The list is sorted according the the target command profiled in the " +"corresponding dump.

" +"

On selecting a profile dump, information for it is shown in the bottom area " +"of the dockable: " +"

    " +"
  • Options allows you to view the profiled command and profile options " +"of this dump. By changing any item, a new (yet unexisting) profile template is " +"created. Press Run Profile to start aprofile run with these options in " +"the background. " +"
  • Info gives detailed info on the selected dump like event cost " +"summary and properties of the simulated cache. " +"
  • State is only available for current happening profiles runs. Press " +"Update to see different counters of the run, and a stack trace of the " +"current position in the program profiled. Check the Every " +"option to let KCachegrind regularly poll these data. Check the Sync " +"option to let the dockable activate the top function in the current loaded " +"dump.

" +msgstr "" + +#: toplevel.cpp:455 +msgid "&Duplicate" +msgstr "" + +#: toplevel.cpp:459 +msgid "" +"Duplicate Current Layout" +"

Make a copy of the current layout.

" +msgstr "" + +#: toplevel.cpp:466 +msgid "" +"Remove Current Layout" +"

Delete current layout and make the previous active.

" +msgstr "" + +#: toplevel.cpp:470 +msgid "&Go to Next" +msgstr "" + +#: toplevel.cpp:474 +msgid "Go to Next Layout" +msgstr "" + +#: toplevel.cpp:477 +msgid "&Go to Previous" +msgstr "" + +#: toplevel.cpp:481 +msgid "Go to Previous Layout" +msgstr "" + +#: toplevel.cpp:484 +msgid "&Restore to Default" +msgstr "" + +#: toplevel.cpp:487 +msgid "Restore Layouts to Default" +msgstr "" + +#: toplevel.cpp:490 +msgid "&Save as Default" +msgstr "" + +#: toplevel.cpp:493 +msgid "Save Layouts as Default" +msgstr "" + +#: toplevel.cpp:504 +msgid "New

Open new empty KCachegrind window.

" +msgstr "" + +#: toplevel.cpp:507 +msgid "&Add..." +msgstr "" + +#: toplevel.cpp:510 +msgid "" +"Add Profile Data" +"

This opens an additional profile data file in the current window.

" +msgstr "" + +#: toplevel.cpp:522 +msgid "Reload Profile Data

This loads any new created parts, too.

" +msgstr "" + +#: toplevel.cpp:526 +msgid "&Export Graph" +msgstr "" + +#: toplevel.cpp:530 +msgid "" +"Export Call Graph" +"

Generates a file with extension .dot for the tools of the GraphViz " +"package.

" +msgstr "" + +#: toplevel.cpp:536 +msgid "&Force Dump" +msgstr "" + +#: toplevel.cpp:545 +msgid "" +"Force Dump" +"

This forces a dump for a Callgrind profile run in the current directory. " +"This action is checked while KCachegrind looks for the dump. If the dump is " +"finished, it automatically reloads the current trace. If this is the one from " +"the running Callgrind, the new created trace part will be loaded, too.

" +"

Force dump creates a file 'callgrind.cmd', and checks every second for its " +"existence. A running Callgrind will detect this file, dump a trace part, and " +"delete 'callgrind.cmd'. The deletion is detected by KCachegrind, and it does a " +"Reload. If there's no Callgrind running, press 'Force Dump' again to " +"cancel the dump request. This deletes 'callgrind.cmd' itself and stops polling " +"for a new dump.

" +"

Note: A Callgrind run only detects existence of 'callgrind.cmd' " +"when actively running a few milliseconds, i.e. not " +"sleeping. Tip: For a profiled GUI program, you can awake Callgrind e.g. by " +"resizing a window of the program.

" +msgstr "" + +#: toplevel.cpp:570 +msgid "" +"Open Profile Data" +"

This opens a profile data file, with possible multiple parts

" +msgstr "" + +#: toplevel.cpp:586 +msgid "Show/Hide the Parts Overview Dockable" +msgstr "" + +#: toplevel.cpp:590 +msgid "Call Stack" +msgstr "" + +#: toplevel.cpp:595 +msgid "Show/Hide the Call Stack Dockable" +msgstr "" + +#. i18n: file functionselectionbase.ui line 16 +#: rc.cpp:297 toplevel.cpp:599 +#, no-c-format +msgid "Function Profile" +msgstr "" + +#: toplevel.cpp:604 +msgid "Show/Hide the Function Profile Dockable" +msgstr "" + +#: toplevel.cpp:614 +msgid "Show/Hide the Profile Dumps Dockable" +msgstr "" + +#: toplevel.cpp:619 +msgid "Show Relative Costs" +msgstr "" + +#: toplevel.cpp:626 +msgid "Show Absolute Costs" +msgstr "" + +#: toplevel.cpp:629 +msgid "Show relative instead of absolute costs" +msgstr "" + +#: toplevel.cpp:633 +msgid "Percentage Relative to Parent" +msgstr "" + +#: toplevel.cpp:639 +msgid "Show percentage costs relative to parent" +msgstr "" + +#: toplevel.cpp:643 +msgid "" +"Show percentage costs relative to parent" +"

If this is switched off, percentage costs are always shown relative to the " +"total cost of the profile part(s) that are currently browsed. By turning on " +"this option, percentage cost of shown cost items will be relative to the parent " +"cost item." +"

    " +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"" +"
    Cost TypeParent Cost
    Function CumulativeTotal
    Function SelfFunction Group (*) / Total
    CallFunction Cumulative
    Source LineFunction Cumulative
    " +"

    (*) Only if function grouping is switched on (e.g. ELF object grouping)." +msgstr "" + +#: toplevel.cpp:658 +msgid "Do Cycle Detection" +msgstr "" + +#: toplevel.cpp:664 +msgid "Skip Cycle Detection" +msgstr "" + +#: toplevel.cpp:667 +msgid "" +"Detect recursive cycles" +"

    If this is switched off, the treemap drawing will show black areas when a " +"recursive call is made instead of drawing the recursion ad infinitum. Note that " +"the size of black areas often will be wrong, as inside recursive cycles the " +"cost of calls cannot be determined; the error is small, however, for false " +"cycles (see documentation)." +"

    The correct handling for cycles is to detect them and collapse all functions " +"of a cycle into a virtual function, which is done when this option is selected. " +"Unfortunately, with GUI applications, this often will lead to huge false " +"cycles, making the analysis impossible; therefore, there is the option to " +"switch this off." +msgstr "" + +#: toplevel.cpp:689 toplevel.cpp:729 +msgid "Go back in function selection history" +msgstr "" + +#: toplevel.cpp:695 toplevel.cpp:741 +msgid "Go forward in function selection history" +msgstr "" + +#: toplevel.cpp:701 toplevel.cpp:715 +msgid "" +"Go Up" +"

    Go to last selected caller of current function. If no caller was visited, " +"use that with highest cost.

    " +msgstr "" + +#: toplevel.cpp:707 +msgid "&Up" +msgstr "" + +#: toplevel.cpp:746 toplevel.cpp:1651 +msgid "Primary Event Type" +msgstr "" + +#: toplevel.cpp:748 +msgid "Select primary event type of costs" +msgstr "" + +#: toplevel.cpp:758 toplevel.cpp:1654 +msgid "Secondary Event Type" +msgstr "" + +#: toplevel.cpp:760 +msgid "Select secondary event type for cost e.g. shown in annotations" +msgstr "" + +#: functionselection.cpp:243 toplevel.cpp:768 +msgid "Grouping" +msgstr "" + +#: toplevel.cpp:771 +msgid "Select how functions are grouped into higher level cost items" +msgstr "" + +#: functionselection.cpp:52 toplevel.cpp:777 +msgid "(No Grouping)" +msgstr "" + +#: toplevel.cpp:787 +msgid "Split" +msgstr "" + +#: toplevel.cpp:791 +msgid "Show two information panels" +msgstr "" + +#: toplevel.cpp:795 +msgid "Split Horizontal" +msgstr "" + +#: toplevel.cpp:800 +msgid "Change Split Orientation when main window is split." +msgstr "" + +#: toplevel.cpp:808 +msgid "Tip of the &Day..." +msgstr "" + +#: toplevel.cpp:809 +msgid "Show \"Tip of the Day\"" +msgstr "" + +#: toplevel.cpp:1012 toplevel.cpp:1061 +msgid "" +"cachegrind.out* callgrind.out*|Callgrind Profile Data\n" +"*|All Files" +msgstr "" + +#: toplevel.cpp:1014 +msgid "Select Callgrind Profile Data" +msgstr "" + +#: toplevel.cpp:1063 +msgid "Add Callgrind Profile Data" +msgstr "" + +#: toplevel.cpp:1221 toplevel.cpp:1574 +msgid "(Hidden)" +msgstr "" + +#: toplevel.cpp:1626 +msgid "Hide" +msgstr "" + +#: toplevel.cpp:1659 +msgid "Show Absolute Cost" +msgstr "" + +#: toplevel.cpp:1662 +msgid "Show Relative Cost" +msgstr "" + +#: toplevel.cpp:1693 +msgid "Go Forward" +msgstr "" + +#: toplevel.cpp:1694 +msgid "Go Up" +msgstr "" + +#: toplevel.cpp:1926 +#, c-format +msgid "Layout Count: %1" +msgstr "" + +#: toplevel.cpp:1933 +msgid "No profile data file loaded." +msgstr "" + +#: toplevel.cpp:1942 +msgid "Total %1 Cost: %2" +msgstr "" + +#: toplevel.cpp:1954 +msgid "No event type selected" +msgstr "" + +#: toplevel.cpp:2199 toplevel.cpp:2235 toplevel.cpp:2271 +msgid "(No Stack)" +msgstr "" + +#: toplevel.cpp:2205 +msgid "(No next function)" +msgstr "" + +#: toplevel.cpp:2241 +msgid "(No previous function)" +msgstr "" + +#: toplevel.cpp:2276 +msgid "(No Function Up)" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 906 +#: instrview.cpp:125 rc.cpp:264 sourceview.cpp:50 +#, no-c-format +msgid "#" +msgstr "" + +#: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52 +msgid "Cost 2" +msgstr "" + +#: instrview.cpp:129 +msgid "Hex" +msgstr "" + +#: instrview.cpp:131 tabview.cpp:313 +msgid "Assembler" +msgstr "" + +#: instrview.cpp:132 +msgid "Source Position" +msgstr "" + +#: instrview.cpp:163 +msgid "" +"Annotated Assembler" +"

    The annotated assembler list shows the machine code instructions of the " +"current selected function together with (self) cost spent while executing an " +"instruction. If this is a call instruction, lines with details on the call " +"happening are inserted into the source: the cost spent inside of the call, the " +"number of calls happening, and the call destination.

    " +"

    The disassembler output shown is generated with the 'objdump' utility from " +"the 'binutils' package.

    " +"

    Select a line with call information to make the destination function of this " +"call current.

    " +msgstr "" + +#: callgraphview.cpp:2397 callgraphview.cpp:2401 callgraphview.cpp:2419 +#: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191 +#: sourceview.cpp:116 +msgid "Go to '%1'" +msgstr "" + +#: instrview.cpp:195 +#, c-format +msgid "Go to Address %1" +msgstr "" + +#: instrview.cpp:207 +msgid "Hex Code" +msgstr "" + +#: instrview.cpp:426 +msgid "There is no instruction info in the profile data file." +msgstr "" + +#: instrview.cpp:428 +msgid "For the Valgrind Calltree Skin, rerun with option" +msgstr "" + +#: instrview.cpp:429 +msgid " --dump-instr=yes" +msgstr "" + +#: instrview.cpp:430 +msgid "To see (conditional) jumps, additionally specify" +msgstr "" + +#: instrview.cpp:431 +msgid " --trace-jump=yes" +msgstr "" + +#: instrview.cpp:629 +msgid "There is an error trying to execute the command" +msgstr "" + +#: instrview.cpp:634 instrview.cpp:900 +msgid "Check that you have installed 'objdump'." +msgstr "" + +#: instrview.cpp:636 instrview.cpp:902 +msgid "This utility can be found in the 'binutils' package." +msgstr "" + +#: instrview.cpp:739 +msgid "(No Assembler)" +msgstr "" + +#: instrview.cpp:875 +#, c-format +msgid "" +"_n: There is %n cost line without assembler code.\n" +"There are %n cost lines without assembler code." +msgstr "" + +#: instrview.cpp:877 +msgid "This happens because the code of" +msgstr "" + +#: instrview.cpp:880 +msgid "does not seem to match the profile data file." +msgstr "" + +#: instrview.cpp:883 +msgid "Are you using an old profile data file or is the above mentioned" +msgstr "" + +#: instrview.cpp:885 +msgid "ELF object from an updated installation/another machine?" +msgstr "" + +#: instrview.cpp:893 +msgid "There seems to be an error trying to execute the command" +msgstr "" + +#: instrview.cpp:898 +msgid "Check that the ELF object used in the command exists." +msgstr "" + +#: callgraphview.cpp:306 +#, c-format +msgid "Call(s) from %1" +msgstr "" + +#: callgraphview.cpp:307 +#, c-format +msgid "Call(s) to %1" +msgstr "" + +#: callgraphview.cpp:308 +msgid "(unknown call)" +msgstr "" + +#: callgraphview.cpp:1425 +msgid "" +"Call Graph around active Function" +"

    Depending on configuration, this view shows the call graph environment of " +"the active function. Note: the shown cost is only " +"the cost which is spent while the active function was actually running; i.e. " +"the cost shown for main() - if it's visible - should be the same as the cost of " +"the active function, as that's the part of inclusive cost of main() spent while " +"the active function was running.

    " +"

    For cycles, blue call arrows indicate that this is an artificial call added " +"for correct drawing which actually never happened.

    " +"

    If the graph is larger than the widget area, an overview panner is shown in " +"one edge. There are similar visualization options to the Call Treemap; the " +"selected function is highlighted." +"

    " +msgstr "" + +#: callgraphview.cpp:1789 +msgid "" +"Warning: a long lasting graph layouting is in progress.\n" +"Reduce node/edge limits for speedup.\n" +msgstr "" + +#: callgraphview.cpp:1792 +msgid "" +"Layouting stopped.\n" +msgstr "" + +#: callgraphview.cpp:1794 +msgid "" +"The call graph has %1 nodes and %2 edges.\n" +msgstr "" + +#: callgraphview.cpp:1827 +msgid "No item activated for which to draw the call graph." +msgstr "" + +#: callgraphview.cpp:1838 +msgid "No call graph can be drawn for the active item." +msgstr "" + +#: callgraphview.cpp:1867 +msgid "" +"No call graph is available because the following\n" +"command cannot be run:\n" +"'%1'\n" +msgstr "" + +#: callgraphview.cpp:1870 callgraphview.cpp:2200 +msgid "Please check that 'dot' is installed (package GraphViz)." +msgstr "" + +#: callgraphview.cpp:2199 +msgid "" +"Error running the graph layouting tool.\n" +msgstr "" + +#: callgraphview.cpp:2207 +msgid "" +"There is no call graph available for function\n" +"\t'%1'\n" +"because it has no cost of the selected event type." +msgstr "" + +#: callgraphview.cpp:2428 +msgid "Stop Layouting" +msgstr "" + +#: callgraphview.cpp:2436 +msgid "As PostScript" +msgstr "" + +#: callgraphview.cpp:2437 +msgid "As Image ..." +msgstr "" + +#: callgraphview.cpp:2439 +msgid "Export Graph" +msgstr "" + +#: callgraphview.cpp:2444 callgraphview.cpp:2467 +msgid "Unlimited" +msgstr "" + +#: callgraphview.cpp:2447 callgraphview.cpp:2470 +msgid "None" +msgstr "" + +#: callgraphview.cpp:2448 callgraphview.cpp:2471 +msgid "max. 2" +msgstr "" + +#: callgraphview.cpp:2449 callgraphview.cpp:2472 +msgid "max. 5" +msgstr "" + +#: callgraphview.cpp:2450 callgraphview.cpp:2473 +msgid "max. 10" +msgstr "" + +#: callgraphview.cpp:2451 callgraphview.cpp:2474 +msgid "max. 15" +msgstr "" + +#: callgraphview.cpp:2461 callgraphview.cpp:2484 +#, c-format +msgid "< %1" +msgstr "" + +#: callgraphview.cpp:2490 +msgid "No Minimum" +msgstr "" + +#: callgraphview.cpp:2494 +#, c-format +msgid "50 %" +msgstr "" + +#: callgraphview.cpp:2495 +#, c-format +msgid "20 %" +msgstr "" + +#: callgraphview.cpp:2496 +#, c-format +msgid "10 %" +msgstr "" + +#: callgraphview.cpp:2497 +#, c-format +msgid "5 %" +msgstr "" + +#: callgraphview.cpp:2498 +#, c-format +msgid "3 %" +msgstr "" + +#: callgraphview.cpp:2499 +#, c-format +msgid "2 %" +msgstr "" + +#: callgraphview.cpp:2500 +#, c-format +msgid "1.5 %" +msgstr "" + +#: callgraphview.cpp:2501 +#, c-format +msgid "1 %" +msgstr "" + +#: callgraphview.cpp:2517 +msgid "Same as Node" +msgstr "" + +#: callgraphview.cpp:2518 +#, c-format +msgid "50 % of Node" +msgstr "" + +#: callgraphview.cpp:2519 +#, c-format +msgid "20 % of Node" +msgstr "" + +#: callgraphview.cpp:2520 +#, c-format +msgid "10 % of Node" +msgstr "" + +#: callgraphview.cpp:2530 +msgid "Caller Depth" +msgstr "" + +#: callgraphview.cpp:2531 +msgid "Callee Depth" +msgstr "" + +#: callgraphview.cpp:2532 +msgid "Min. Node Cost" +msgstr "" + +#: callgraphview.cpp:2533 +msgid "Min. Call Cost" +msgstr "" + +#: callgraphview.cpp:2535 +msgid "Arrows for Skipped Calls" +msgstr "" + +#: callgraphview.cpp:2537 +msgid "Inner-cycle Calls" +msgstr "" + +#: callgraphview.cpp:2539 +msgid "Cluster Groups" +msgstr "" + +#: callgraphview.cpp:2544 +msgid "Compact" +msgstr "" + +#: callgraphview.cpp:2545 +msgid "Normal" +msgstr "" + +#: callgraphview.cpp:2546 +msgid "Tall" +msgstr "" + +#: callgraphview.cpp:2551 +msgid "Top to Down" +msgstr "" + +#: callgraphview.cpp:2552 +msgid "Left to Right" +msgstr "" + +#: callgraphview.cpp:2553 +msgid "Circular" +msgstr "" + +#: callgraphview.cpp:2559 +msgid "TopLeft" +msgstr "" + +#: callgraphview.cpp:2560 +msgid "TopRight" +msgstr "" + +#: callgraphview.cpp:2561 +msgid "BottomLeft" +msgstr "" + +#: callgraphview.cpp:2562 +msgid "BottomRight" +msgstr "" + +#. i18n: file configdlgbase.ui line 246 +#: callgraphview.cpp:2563 rc.cpp:42 rc.cpp:51 rc.cpp:54 +#, no-c-format +msgid "Automatic" +msgstr "" + +#: callgraphview.cpp:2570 +msgid "Graph" +msgstr "" + +#: callgraphview.cpp:2572 +msgid "Birds-eye View" +msgstr "" + +#: _translatorinfo.cpp:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" + +#: _translatorinfo.cpp:3 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" + +#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72 +#, c-format +msgid "" +"_n: (%n function skipped)\n" +"(%n functions skipped)" +msgstr "" + +#: main.cpp:38 +msgid "Run under cachegrind" +msgstr "" + +#: main.cpp:39 +msgid "Show information of this trace" +msgstr "" + +#: main.cpp:46 +msgid "KCachegrind" +msgstr "" + +#: main.cpp:48 +msgid "KDE Frontend for Cachegrind" +msgstr "" + +#: main.cpp:50 +msgid "(C) 2002, 2003, 2004" +msgstr "" + +#: main.cpp:53 +msgid "Author/Maintainer" +msgstr "" + +#: tabview.cpp:64 +msgid "Move to Top" +msgstr "" + +#: tabview.cpp:68 +msgid "Move to Right" +msgstr "" + +#: tabview.cpp:72 +msgid "Move to Bottom" +msgstr "" + +#: tabview.cpp:76 +msgid "Move to Bottom Left" +msgstr "" + +#: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908 +msgid "Bottom Left" +msgstr "" + +#: tabview.cpp:79 +msgid "Move Area To" +msgstr "" + +#: tabview.cpp:81 +msgid "Hide This Tab" +msgstr "" + +#: tabview.cpp:82 +msgid "Hide Area" +msgstr "" + +#: tabview.cpp:95 +msgid "Show Hidden On" +msgstr "" + +#: tabview.cpp:242 +msgid "(No profile data file loaded)" +msgstr "" + +#: tabview.cpp:281 +msgid "Types" +msgstr "" + +#: tabview.cpp:284 +msgid "Callers" +msgstr "" + +#: tabview.cpp:287 +msgid "All Callers" +msgstr "" + +#: tabview.cpp:290 +msgid "Caller Map" +msgstr "" + +#: tabview.cpp:293 +msgid "Source" +msgstr "" + +#: tabview.cpp:297 +msgid "Parts" +msgstr "" + +#: tabview.cpp:300 +msgid "Call Graph" +msgstr "" + +#: tabview.cpp:303 +msgid "Callees" +msgstr "" + +#: tabview.cpp:306 +msgid "All Callees" +msgstr "" + +#: tabview.cpp:310 +msgid "Callee Map" +msgstr "" + +#: tabview.cpp:553 +msgid "" +"Information Tabs" +"

    This widget shows information for the current selected function in different " +"tabs: " +"

      " +"
    • The Costs tab shows a list of available event types and the inclusive and " +"self costs regarding to these types.
      • " +"
    • The Parts tab shows a list of trace parts if the trace consists of more " +"than one part (otherwise, this tab is hided). The cost of the selected function " +"spent in the different parts together with the calls happening is shown.
      • " +"
    • The Call Lists tab shows direct callers and callees of the function in more " +"detail.
      • " +"
    • The Coverage tab shows the same is the Call Lists tab, but not only direct " +"callers and callees but also indirect ones.
      • " +"
    • The Call Graph tab shows a graphical visualization of the calls done by " +"this function.
      • " +"
    • The Source tab presents annotated source code if debugging information and " +"the source file is available.
      • " +"
    • The Assembler tab presents annotated assembler code if trace information on " +"instruction level is available.
    For more information, see the " +"What's This? help of the corresponding tab widget

    " +msgstr "" + +#: tabview.cpp:630 +msgid "(No Data loaded)" +msgstr "" + +#: tabview.cpp:631 +msgid "(No function selected)" +msgstr "" + +#: sourceview.cpp:54 sourceview.cpp:554 +msgid "Source (unknown)" +msgstr "" + +#: sourceview.cpp:89 +msgid "" +"Annotated Source" +"

    The annotated source list shows the source lines of the current selected " +"function together with (self) cost spent while executing the code of this " +"source line. If there was a call in a source line, lines with details on the " +"call happening are inserted into the source: the cost spent inside of the call, " +"the number of calls happening, and the call destination.

    " +"

    Select a inserted call information line to make the destination function " +"current.

    " +msgstr "" + +#: sourceview.cpp:120 +#, c-format +msgid "Go to Line %1" +msgstr "" + +#: sourceview.cpp:293 +msgid "(No Source)" +msgstr "" + +#: sourceview.cpp:512 +msgid "There is no cost of current selected type associated" +msgstr "" + +#: sourceview.cpp:514 +msgid "with any source line of this function in file" +msgstr "" + +#: sourceview.cpp:518 +msgid "Thus, no annotated source can be shown." +msgstr "" + +#: sourceview.cpp:553 +msgid "Source ('%1')" +msgstr "" + +#: sourceview.cpp:559 +msgid "--- Inlined from '%1' ---" +msgstr "" + +#: sourceview.cpp:560 +msgid "--- Inlined from unknown source ---" +msgstr "" + +#: sourceview.cpp:565 +msgid "There is no source available for the following function:" +msgstr "" + +#: sourceview.cpp:570 +msgid "This is because no debug information is present." +msgstr "" + +#: sourceview.cpp:572 +msgid "Recompile source and redo the profile run." +msgstr "" + +#: sourceview.cpp:575 +msgid "The function is located in this ELF object:" +msgstr "" + +#: sourceview.cpp:583 +msgid "This is because its source file cannot be found:" +msgstr "" + +#: sourceview.cpp:587 +msgid "Add the folder of this file to the source folder list." +msgstr "" + +#: sourceview.cpp:589 +msgid "The list can be found in the configuration dialog." +msgstr "" + +#: partlistitem.cpp:49 +msgid " (Thread %1)" +msgstr "" + +#: partlistitem.cpp:56 +msgid "(none)" +msgstr "" + +#: callitem.cpp:82 partlistitem.cpp:152 +msgid "(active)" +msgstr "" + +#: functionselection.cpp:176 +#, c-format +msgid "Go to %1" +msgstr "" + +#: functionselection.cpp:203 +msgid "Show All Items" +msgstr "" + +#: functionselection.cpp:226 +msgid "No Grouping" +msgstr "" + +#: coverageview.cpp:48 coverageview.cpp:54 +msgid "Distance" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 928 +#: coverageview.cpp:49 partview.cpp:49 rc.cpp:270 rc.cpp:315 +#, no-c-format +msgid "Called" +msgstr "" + +#: callview.cpp:48 coverageview.cpp:50 +msgid "Caller" +msgstr "" + +#: coverageview.cpp:55 +msgid "Calling" +msgstr "" + +#: callview.cpp:52 coverageview.cpp:56 +msgid "Callee" +msgstr "" + +#: coverageview.cpp:90 +msgid "" +"List of all Callers" +"

    This list shows all functions calling the current selected one, either " +"directly or with several functions in-between on the stack; the number of " +"functions in-between plus one is called the Distance " +"(e.g. for function A,B,C there exists a call from A to C when A calls B and B " +"calls C, i.e. A => B => C. The distance here is 2).

    " +"

    Absolute cost shown is the cost spent in the selected function while a " +"listed function is active; relative cost is the percentage of all cost spent in " +"the selected function while the listed one is active. The cost graphic shows " +"logarithmic percentage with a different color for each distance.

    " +"

    As there can be many calls from the same function, the distance column " +"sometimes shows the range of distances for all calls happening; then, in " +"parentheses, there is the medium distance, i.e. the distance where most of the " +"call costs happened.

    " +"

    Selecting a function makes it the current selected one of this information " +"panel. If there are two panels (Split mode), the function of the other panel is " +"changed instead.

    " +msgstr "" + +#: coverageview.cpp:120 +msgid "" +"List of all Callees" +"

    This list shows all functions called by the current selected one, either " +"directly or with several function in-between on the stack; the number of " +"function in-between plus one is called the Distance " +"(e.g. for function A,B,C there exists a call from A to C when A calls B and B " +"calls C, i.e. A => B => C. The distance here is 2).

    " +"

    Absolute cost shown is the cost spent in the listed function while the " +"selected is active; relative cost is the percentage of all cost spent in the " +"listed function while the selected one is active. The cost graphic always shows " +"logarithmic percentage with a different color for each distance.

    " +"

    As there can be many calls to the same function, the distance column " +"sometimes shows the range of distances for all calls happening; then, in " +"parentheses, there is the medium distance, i.e. the distance where most of the " +"call costs happened.

    " +"

    Selecting a function makes it the current selected one of this information " +"panel. If there are two panels (Split mode), the function of the other panel is " +"changed instead.

    " +msgstr "" + +#: configuration.cpp:63 +msgid "Instruction Fetch" +msgstr "" + +#: configuration.cpp:64 +msgid "Data Read Access" +msgstr "" + +#: configuration.cpp:65 +msgid "Data Write Access" +msgstr "" + +#: configuration.cpp:66 +msgid "L1 Instr. Fetch Miss" +msgstr "" + +#: configuration.cpp:67 +msgid "L1 Data Read Miss" +msgstr "" + +#: configuration.cpp:68 +msgid "L1 Data Write Miss" +msgstr "" + +#: configuration.cpp:69 +msgid "L2 Instr. Fetch Miss" +msgstr "" + +#: configuration.cpp:70 +msgid "L2 Data Read Miss" +msgstr "" + +#: configuration.cpp:71 +msgid "L2 Data Write Miss" +msgstr "" + +#: configuration.cpp:72 +msgid "Samples" +msgstr "" + +#: configuration.cpp:73 +msgid "System Time" +msgstr "" + +#: configuration.cpp:74 +msgid "User Time" +msgstr "" + +#: configuration.cpp:75 +msgid "L1 Miss Sum" +msgstr "" + +#: configuration.cpp:76 +msgid "L2 Miss Sum" +msgstr "" + +#: configuration.cpp:77 +msgid "Cycle Estimation" +msgstr "" + +#. i18n: file kcachegrindui.rc line 15 +#: rc.cpp:9 +#, no-c-format +msgid "&Layout" +msgstr "" + +#. i18n: file kcachegrindui.rc line 32 +#: rc.cpp:12 +#, no-c-format +msgid "Sidebars" +msgstr "" + +#. i18n: file kcachegrindui.rc line 54 +#: rc.cpp:18 +#, no-c-format +msgid "State Toolbar" +msgstr "" + +#. i18n: file configdlgbase.ui line 37 +#: rc.cpp:24 +#, no-c-format +msgid "General" +msgstr "" + +#. i18n: file configdlgbase.ui line 69 +#: rc.cpp:27 +#, no-c-format +msgid "Truncated when more/longer than:" +msgstr "" + +#. i18n: file configdlgbase.ui line 77 +#: rc.cpp:30 +#, no-c-format +msgid "Precision of percentage values:" +msgstr "" + +#. i18n: file configdlgbase.ui line 85 +#: rc.cpp:33 +#, no-c-format +msgid "Symbols in tooltips and context menus" +msgstr "" + +#. i18n: file configdlgbase.ui line 141 +#: rc.cpp:36 +#, no-c-format +msgid "Maximum number of items in lists:" +msgstr "" + +#. i18n: file configdlgbase.ui line 162 +#: rc.cpp:39 +#, no-c-format +msgid "Cost Item Colors" +msgstr "" + +#. i18n: file configdlgbase.ui line 254 +#: rc.cpp:45 +#, no-c-format +msgid "Object:" +msgstr "" + +#. i18n: file configdlgbase.ui line 262 +#: rc.cpp:48 +#, no-c-format +msgid "Class:" +msgstr "" + +#. i18n: file configdlgbase.ui line 310 +#: rc.cpp:57 +#, no-c-format +msgid "File:" +msgstr "" + +#. i18n: file configdlgbase.ui line 376 +#: rc.cpp:60 +#, no-c-format +msgid "Annotations" +msgstr "" + +#. i18n: file configdlgbase.ui line 395 +#: rc.cpp:63 +#, no-c-format +msgid "Context lines in annotations:" +msgstr "" + +#. i18n: file configdlgbase.ui line 423 +#: rc.cpp:66 +#, no-c-format +msgid "Source Folders" +msgstr "" + +#. i18n: file configdlgbase.ui line 454 +#: rc.cpp:69 +#, no-c-format +msgid "Object / Related Source Base" +msgstr "" + +#. i18n: file configdlgbase.ui line 483 +#: rc.cpp:72 +#, no-c-format +msgid "Add..." +msgstr "" + +#. i18n: file dumpselectionbase.ui line 32 +#: rc.cpp:87 +#, no-c-format +msgid "Target" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 54 +#: rc.cpp:90 +#, no-c-format +msgid "Time" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 65 +#: rc.cpp:93 +#, no-c-format +msgid "Path" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 106 +#: rc.cpp:99 +#, no-c-format +msgid "Target command:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 119 +#: rc.cpp:102 +#, no-c-format +msgid "Profiler options:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 125 +#: rc.cpp:105 +#, no-c-format +msgid "Option" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 136 +#: rc.cpp:108 rc.cpp:219 +#, no-c-format +msgid "Value" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 147 +#: rc.cpp:111 +#, no-c-format +msgid "Trace" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 160 +#: rc.cpp:114 rc.cpp:237 +#, no-c-format +msgid "Jumps" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 174 +#: rc.cpp:117 +#, no-c-format +msgid "Instructions" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 189 +#: rc.cpp:120 rc.cpp:240 +#, no-c-format +msgid "Events" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 202 +#: rc.cpp:123 +#, no-c-format +msgid "Full Cache" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 216 +#: rc.cpp:126 +#, no-c-format +msgid "Custom" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 231 +#: rc.cpp:129 +#, no-c-format +msgid "Collect" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 244 +#: rc.cpp:132 +#, no-c-format +msgid "At Startup" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 258 +#: rc.cpp:135 +#, no-c-format +msgid "While In" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 273 +#: rc.cpp:138 +#, no-c-format +msgid "Skip" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 286 +#: rc.cpp:141 +#, no-c-format +msgid "PLT" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 315 +#: rc.cpp:147 +#, no-c-format +msgid "Dump Profile" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 328 +#: rc.cpp:150 +#, no-c-format +msgid "Every BBs" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 342 +#: rc.cpp:153 rc.cpp:162 +#, no-c-format +msgid "On Entering" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 356 +#: rc.cpp:156 +#, no-c-format +msgid "On Leaving" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 371 +#: rc.cpp:159 +#, no-c-format +msgid "Zero Events" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 399 +#: rc.cpp:165 +#, no-c-format +msgid "Separate" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 412 +#: rc.cpp:168 +#, no-c-format +msgid "Threads" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 426 +#: rc.cpp:171 +#, no-c-format +msgid "Recursions" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 440 +#: rc.cpp:174 +#, no-c-format +msgid "Call Chain" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 470 +#: rc.cpp:177 +#, no-c-format +msgid "Custom profiler options:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 508 +#: rc.cpp:180 +#, no-c-format +msgid "Run New Profile" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 520 +#: rc.cpp:183 +#, no-c-format +msgid "Info" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 531 +#: rc.cpp:186 +#, no-c-format +msgid "Dump reason:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 544 +#: rc.cpp:189 +#, no-c-format +msgid "Event summary:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 561 +#: rc.cpp:195 +#, no-c-format +msgid "Sum" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 579 +#: rc.cpp:198 +#, no-c-format +msgid "Miscellaneous:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 617 +#: rc.cpp:201 +#, no-c-format +msgid "Show" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 625 +#: rc.cpp:204 +#, no-c-format +msgid "Compare" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 637 +#: rc.cpp:207 +#, no-c-format +msgid "State" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 656 +#: rc.cpp:210 +#, no-c-format +msgid "Update" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 664 +#: rc.cpp:213 +#, no-c-format +msgid "Every [s]:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 677 +#: rc.cpp:216 +#, no-c-format +msgid "Counter" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 699 +#: rc.cpp:222 +#, no-c-format +msgid "Dumps Done" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 713 +#: rc.cpp:225 +#, no-c-format +msgid "Is Collecting" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 727 +#: rc.cpp:228 +#, no-c-format +msgid "Executed" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 740 +#: rc.cpp:231 +#, no-c-format +msgid "Basic Blocks" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 754 +#: callmapview.cpp:63 rc.cpp:234 rc.cpp:339 +#, no-c-format +msgid "Calls" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 796 +#: rc.cpp:243 +#, no-c-format +msgid "Ir" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 811 +#: rc.cpp:246 +#, no-c-format +msgid "Distinct" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 824 +#: configdlg.cpp:58 rc.cpp:249 +#, no-c-format +msgid "ELF Objects" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 838 +#: rc.cpp:252 +#, no-c-format +msgid "Functions" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 852 +#: rc.cpp:255 +#, no-c-format +msgid "Contexts" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 890 +#: rc.cpp:258 +#, no-c-format +msgid "Stack trace:" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 898 +#: rc.cpp:261 +#, no-c-format +msgid "Sync." +msgstr "" + +#. i18n: file dumpselectionbase.ui line 950 +#: callmapview.cpp:61 rc.cpp:276 rc.cpp:321 +#, no-c-format +msgid "Location" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 976 +#: rc.cpp:279 +#, no-c-format +msgid "Start" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 1001 +#: rc.cpp:282 +#, no-c-format +msgid "Zero" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 1009 +#: rc.cpp:285 +#, no-c-format +msgid "Dump" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 1021 +#: rc.cpp:288 +#, no-c-format +msgid "Messages" +msgstr "" + +#. i18n: file dumpselectionbase.ui line 1045 +#: rc.cpp:291 +#, no-c-format +msgid "Kill Run" +msgstr "" + +#. i18n: file functionselectionbase.ui line 41 +#: rc.cpp:300 +#, no-c-format +msgid "&Search:" +msgstr "" + +#. i18n: file functionselectionbase.ui line 73 +#: rc.cpp:306 +#, no-c-format +msgid "Group" +msgstr "" + +#. i18n: file partselectionbase.ui line 60 +#: rc.cpp:327 +#, no-c-format +msgid "(no trace parts)" +msgstr "" + +#. i18n: file stackselectionbase.ui line 16 +#: rc.cpp:330 +#, no-c-format +msgid "Stack Selection" +msgstr "" + +#. i18n: file stackselectionbase.ui line 42 +#: rc.cpp:336 +#, no-c-format +msgid "Cost2" +msgstr "" + +#: treemap.cpp:1281 +#, c-format +msgid "Text %1" +msgstr "" + +#: treemap.cpp:2809 +msgid "Recursive Bisection" +msgstr "" + +#: treemap.cpp:2810 +msgid "Columns" +msgstr "" + +#: treemap.cpp:2811 +msgid "Rows" +msgstr "" + +#: treemap.cpp:2812 +msgid "Always Best" +msgstr "" + +#: treemap.cpp:2813 +msgid "Best" +msgstr "" + +#: treemap.cpp:2814 +msgid "Alternate (V)" +msgstr "" + +#: treemap.cpp:2815 +msgid "Alternate (H)" +msgstr "" + +#: treemap.cpp:2872 +msgid "Nesting" +msgstr "" + +#: treemap.cpp:2875 +msgid "Correct Borders Only" +msgstr "" + +#: treemap.cpp:2877 treemap.cpp:2878 treemap.cpp:2879 treemap.cpp:2880 +#, c-format +msgid "Width %1" +msgstr "" + +#: callmapview.cpp:321 treemap.cpp:2889 +msgid "Shading" +msgstr "" + +#: treemap.cpp:2902 +msgid "Visible" +msgstr "" + +#: treemap.cpp:2903 +msgid "Take Space From Children" +msgstr "" + +#: treemap.cpp:2905 +msgid "Top Left" +msgstr "" + +#: treemap.cpp:2906 +msgid "Top Center" +msgstr "" + +#: treemap.cpp:2907 +msgid "Top Right" +msgstr "" + +#: treemap.cpp:2909 +msgid "Bottom Center" +msgstr "" + +#: treemap.cpp:2910 +msgid "Bottom Right" +msgstr "" + +#: treemap.cpp:2987 +msgid "No %1 Limit" +msgstr "" + +#: callmapview.cpp:243 treemap.cpp:3039 +msgid "No Area Limit" +msgstr "" + +#: callmapview.cpp:258 treemap.cpp:3045 +msgid "Area of '%1' (%2)" +msgstr "" + +#: treemap.cpp:3056 treemap.cpp:3067 +#, c-format +msgid "" +"_n: 1 Pixel\n" +"%n Pixels" +msgstr "" + +#: callmapview.cpp:264 treemap.cpp:3071 +msgid "Double Area Limit (to %1)" +msgstr "" + +#: treemap.cpp:3073 +msgid "Halve Area Limit (to %1)" +msgstr "" + +#: callmapview.cpp:187 treemap.cpp:3101 +msgid "No Depth Limit" +msgstr "" + +#: callmapview.cpp:198 treemap.cpp:3107 +msgid "Depth of '%1' (%2)" +msgstr "" + +#: treemap.cpp:3118 +#, c-format +msgid "Depth %1" +msgstr "" + +#: treemap.cpp:3122 +msgid "Decrement (to %1)" +msgstr "" + +#: treemap.cpp:3124 +msgid "Increment (to %1)" +msgstr "" + +#: callmapview.cpp:98 +msgid "" +"Caller Map" +"

    This graph shows the nested hierarchy of all callers of the current " +"activated function. Each colored rectangle represents a function; its size " +"tries to be proportional to the cost spent therein while the active function is " +"running (however, there are drawing constrains).

    " +msgstr "" + +#: callmapview.cpp:105 +msgid "" +"Call Map" +"

    This graph shows the nested hierarchy of all callees of the current " +"activated function. Each colored rectangle represents a function; its size " +"tries to be proportional to the cost spent therein while the active function is " +"running (however, there are drawing constrains).

    " +msgstr "" + +#: callmapview.cpp:113 +msgid "" +"

    Appearance options can be found in the in the context menu. To get exact " +"size proportions, choose 'Hide incorrect borders'. As this mode can be " +"very time consuming, you may want to limit the maximum drawn nesting level " +"before. 'Best' determinates the split direction for children from the aspect " +"ratio of the parent. 'Always Best' decides on remaining space for each sibling. " +"'Ignore Proportions' takes space for function name drawing before " +"drawing children. Note that size proportions can get heavily wrong.

    " +"

    This is a TreeMap widget. Keyboard navigation is available with the " +"left/right arrow keys for traversing siblings, and up/down arrow keys to go a " +"nesting level up/down. Return activates the current item.

    " +msgstr "" + +#: callmapview.cpp:167 +msgid "Go To" +msgstr "" + +#: callmapview.cpp:184 +msgid "Stop at Depth" +msgstr "" + +#: callmapview.cpp:190 +msgid "Depth 10" +msgstr "" + +#: callmapview.cpp:192 +msgid "Depth 15" +msgstr "" + +#: callmapview.cpp:194 +msgid "Depth 20" +msgstr "" + +#: callmapview.cpp:204 +msgid "Decrement Depth (to %1)" +msgstr "" + +#: callmapview.cpp:205 +msgid "Increment Depth (to %1)" +msgstr "" + +#: callmapview.cpp:209 +msgid "Stop at Function" +msgstr "" + +#: callmapview.cpp:210 +msgid "No Function Limit" +msgstr "" + +#: callmapview.cpp:240 +msgid "Stop at Area" +msgstr "" + +#: callmapview.cpp:246 +msgid "50 Pixels" +msgstr "" + +#: callmapview.cpp:248 +msgid "100 Pixels" +msgstr "" + +#: callmapview.cpp:250 +msgid "200 Pixels" +msgstr "" + +#: callmapview.cpp:252 +msgid "500 Pixels" +msgstr "" + +#: callmapview.cpp:266 +msgid "Half Area Limit (to %1)" +msgstr "" + +#: callmapview.cpp:273 +msgid "Visualisation" +msgstr "" + +#: callmapview.cpp:277 +msgid "Split Direction" +msgstr "" + +#: callmapview.cpp:279 +msgid "Skip Incorrect Borders" +msgstr "" + +#: callmapview.cpp:284 +msgid "Border Width" +msgstr "" + +#: callmapview.cpp:285 +msgid "Border 0" +msgstr "" + +#: callmapview.cpp:288 +msgid "Border 1" +msgstr "" + +#: callmapview.cpp:290 +msgid "Border 2" +msgstr "" + +#: callmapview.cpp:292 +msgid "Border 3" +msgstr "" + +#: callmapview.cpp:297 +msgid "Draw Symbol Names" +msgstr "" + +#: callmapview.cpp:298 +msgid "Draw Cost" +msgstr "" + +#: callmapview.cpp:299 +msgid "Draw Location" +msgstr "" + +#: callmapview.cpp:300 +msgid "Draw Calls" +msgstr "" + +#: callmapview.cpp:431 +msgid "Call Map: Current is '%1'" +msgstr "" + +#: callmapview.cpp:599 +msgid "(no function)" +msgstr "" + +#: callmapview.cpp:741 callmapview.cpp:858 +msgid "(no call)" +msgstr "" + +#: cachegrindloader.cpp:141 +msgid "Import filter for Cachegrind/Callgrind generated profile data files" +msgstr "" + +#: cachegrindloader.cpp:738 +#, c-format +msgid "Loading %1" +msgstr "" + +#: callview.cpp:47 callview.cpp:51 +msgid "Count" +msgstr "" + +#: callview.cpp:85 +msgid "" +"List of direct Callers" +"

    This list shows all functions calling the current selected one directly, " +"together with a call count and the cost spent in the current selected function " +"while being called from the function from the list.

    " +"

    An icon instead of an inclusive cost specifies that this is a call inside of " +"a recursive cycle. An inclusive cost makes no sense here.

    " +"

    Selecting a function makes it the current selected one of this information " +"panel. If there are two panels (Split mode), the function of the other panel is " +"changed instead.

    " +msgstr "" + +#: callview.cpp:98 +msgid "" +"List of direct Callees" +"

    This list shows all functions called by the current selected one directly, " +"together with a call count and the cost spent in this function while being " +"called from the selected function.

    " +"

    Selecting a function makes it the current selected one of this information " +"panel. If there are two panels (Split mode), the function of the other panel is " +"changed instead.

    " +msgstr "" + +#: costtypeitem.cpp:56 +msgid "Unknown Type" +msgstr "" + +#: tips.cpp:3 +msgid "" +"

    ...that the What's This? help for every GUI widget\n" +"in KCachegrind contains detailed usage information for this widget?\n" +"It is highly recommended to read at least these help texts on first\n" +"use. Request What's This? help by pressing\n" +"Shift+F1 and clicking on the widget.

    \n" +msgstr "" + +#: tips.cpp:12 +msgid "" +"

    ...that you can get profile information at instruction level\n" +"with Calltree when you provide the option --dump-instr=yes?\n" +"Use the Assembler View for the instruction annotations.\n" +"

    \n" +msgstr "" + +#: tips.cpp:20 +msgid "" +"

    ...that you can use Alt-Left/Right keys of your keyboard to go\n" +"back/forward in the active object history ?

    \n" +msgstr "" + +#: tips.cpp:26 +msgid "" +"

    ...that you can navigate in the Callee/Caller Map View using\n" +"arrow keys? Use Left/Right to change to siblings of the current\n" +"item; use Up/Down to go one nesting level up/down. To select\n" +"the current item, press Space, and to activate it, press Return.\n" +"

    \n" +msgstr "" + +#: tips.cpp:35 +msgid "" +"

    ...that you can navigate in the Call Graph View using\n" +"arrow keys? Use Up/Down to go one calling level up/down, alternating\n" +"between calls and functions. Use Left/Right to change to siblings of a current\n" +"selected call. To activate the current item, press Return.\n" +"

    \n" +msgstr "" + +#: tips.cpp:44 +msgid "" +"

    ...that you can rapidly locate a function by entering part of its\n" +"name (case-insensitive) into the edit line of the toolbar\n" +"and hit return?

    \n" +msgstr "" + +#: tips.cpp:51 +msgid "" +"

    ...that you can assign custom colors to \n" +"ELF objects/C++ Classes/Source Files for graph coloring\n" +"in Settings->Configure KCachegrind...?

    \n" +msgstr "" + +#: tips.cpp:58 +msgid "" +"

    ...that you can see if debug info is available for a selected \n" +"function by looking at the location label in the Info tab or\n" +"the source listing header in the source tab?

    \n" +"

    There must be the name of the source file (with extension).\n" +"If KCachegrind still doesn't show the source, make sure that you\n" +"have added the directory of the source file to the\n" +"Source Directories list in the configuration.\n" +msgstr "" + +#: tips.cpp:69 +msgid "" +"

    ...that you can configure whether KCachgrind should\n" +"show absolute event counts or relative ones (percentage display)?

    \n" +msgstr "" + +#: tips.cpp:75 +msgid "" +"

    ...that you can configure the maximum number of items\n" +"for all function lists in KCachegrind? Limiting the number\n" +"of items is done to get a fast reacting GUI. The last item in\n" +"the list will show you the number of skipped functions, together\n" +"with a cost condition for these skipped functions.

    \n" +"

    To activate a function with small costs, search for it and select\n" +"it in the flat profile. Selecting functions with small cost will\n" +"temporarily add them to the flat profile list.

    \n" +msgstr "" + +#: tips.cpp:87 +msgid "" +"

    ...that the Coverage tab - in contrast to the Call Lists tab -\n" +"shows all functions that are calling the selected function\n" +"(upper part) / are called by the selected function (bottom part),\n" +"no matter how many function are between them on the stack?

    \n" +"

    Examples:

    \n" +"

    An entry in the upper list for function foo1() with a value of 50%\n" +"with function bar() selected means that 50% of all the cost of function\n" +"bar() happened while called from function foo1().

    \n" +"

    An entry in the bottom list for function foo2() with a value of 50%\n" +"with function bar() selected means that 50% of all the cost of function\n" +"bar() happened while calling foo2() from bar().

    \n" +msgstr "" + +#: tips.cpp:102 +msgid "" +"

    ...that waiting for the tool tip inside of a tree map\n" +"shows the list of names of the nested rectangles the mouse\n" +"pointer is over?

    \n" +"

    Items from this list can be selected by pressing the right\n" +"mouse button.

    \n" +msgstr "" + +#: tips.cpp:111 +msgid "" +"

    ...that you can constrain the cost counts shown to only a\n" +"few parts of the whole trace by selecting these parts in the\n" +"\"Trace Selection\" Dockable?

    \n" +"

    To generate multiple parts in a profiling run with\n" +"cachegrind, use e.g. option --cachedumps=xxx for parts\n" +"of a length of xxx basic blocks (A basic block is a run\n" +"of not-branching assembler statements inside of your program\n" +"code).

    \n" +msgstr "" + +#: configdlg.cpp:60 +msgid "Source Files" +msgstr "" + +#: configdlg.cpp:61 +msgid "C++ Classes" +msgstr "" + +#: configdlg.cpp:62 +msgid "Function (no Grouping)" +msgstr "" + +#: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371 +msgid "(always)" +msgstr "" + +#: configdlg.cpp:210 +msgid "KCachegrind Configuration" +msgstr "" + +#: configdlg.cpp:211 +msgid "" +"The Maximum Number of List Items should be below 500.The previous set value " +"(%1) will still be used." +msgstr "" + +#: configdlg.cpp:384 +msgid "Choose Source Folder" +msgstr "" + +#: partgraph.cpp:167 +#, c-format +msgid "Profile Part %1" +msgstr "" + +#: partgraph.cpp:226 +msgid "(no trace)" +msgstr "" + +#: partgraph.cpp:229 +msgid "(no part)" +msgstr "" + +#: partview.cpp:51 +msgid "Comment" +msgstr "" + +#: partview.cpp:73 +msgid "" +"Trace Part List" +"

    This list shows all trace parts of the loaded trace. For each part, the " +"self/inclusive cost of the current selected function, spent in the part, is " +"shown; percentage costs are always relative to the total cost " +"of the part (not to the whole trace as in the Trace Part Overview). Also " +"shown are the calls happening to/from the current function inside of the trace " +"part.

    " +"

    By choosing one or more trace parts from the list, the costs shown all over " +"KCachegrind will only be the ones spent in the selected part(s). If no list " +"selection is shown, in fact all trace parts are selected implicitly.

    " +"

    This is a multi-selection list. You can select ranges by dragging the mouse " +"or use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also be " +"done by using the Trace Part Overview Dockable. This one also supports multiple " +"selection.

    " +"

    Note that the list is hidden if only one trace part is loaded.

    " +msgstr "" + +#: partview.cpp:106 +msgid "Select '%1'" +msgstr "" + +#: partview.cpp:107 +msgid "Hide '%1'" +msgstr "" + +#: partview.cpp:111 +msgid "Hide Selected" +msgstr "" + +#: partview.cpp:112 +msgid "Show All" +msgstr "" -- cgit v1.2.1