# translation of kcminput.po to Chinese Traditional
# traditional Chinese translation for kcminput
# Copyright (C) 2002, 2003, 2006 Free Software Foundation, Inc.
#
# Jouston Huang (Huang, Jiun-Jeng) <jouston@housediy.com>, 2001.
# Paladin Liu <paladin@ms1.hinet.net>, 2002.
# 林耕宇 <s9321028@ncnu.edu.tw>, 2003.
msgid ""
msgstr ""
"Project-Id-Version: kcminput\n"
"POT-Creation-Date: 2020-05-11 04:01+0200\n"
"PO-Revision-Date: 2006-06-19 09:15+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.2\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Jouston Huang,Paladin Liu,林耕宇"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "jouston@housediy.com,paladin@ms1.hinet.net,s9321028@ncnu.edu.tw"

#: core/themepage.cpp:60
msgid "Select the cursor theme you want to use:"
msgstr "請選取你想使用的滑鼠游標佈景主題:"

#: core/themepage.cpp:66 xcursor/themepage.cpp:100
msgid "Name"
msgstr "名稱"

#: core/themepage.cpp:67 xcursor/themepage.cpp:101
msgid "Description"
msgstr "解釋"

#: core/themepage.cpp:105 xcursor/themepage.cpp:146
msgid "You have to restart TDE for these changes to take effect."
msgstr "要使改變發生作用,TDE 必須重新啟動"

#: core/themepage.cpp:106 xcursor/themepage.cpp:147
msgid "Cursor Settings Changed"
msgstr "游標設定已變更"

#: core/themepage.cpp:148
msgid "Small black"
msgstr "細黑"

#: core/themepage.cpp:149
msgid "Small black cursors"
msgstr "細黑的游標"

#: core/themepage.cpp:153
msgid "Large black"
msgstr "粗黑"

#: core/themepage.cpp:154
msgid "Large black cursors"
msgstr "粗黑游標(&L)"

#: core/themepage.cpp:158
msgid "Small white"
msgstr "細白"

#: core/themepage.cpp:159
msgid "Small white cursors"
msgstr "細白游標(&W)"

#: core/themepage.cpp:163
msgid "Large white"
msgstr "粗白"

#: core/themepage.cpp:164
msgid "Large white cursors"
msgstr "粗白游標(&L)"

#: logitechmouse.cpp:50 logitechmouse.cpp:92
#, c-format
msgid "Mouse type: %1"
msgstr "滑鼠類型:%1"

#: logitechmouse.cpp:229
msgid ""
"RF channel 1 has been set. Please press Connect button on mouse to re-"
"establish link"
msgstr "RF 頻道 1 已經被設定了。請按滑鼠的連線按鈕來重新建立連結"

#: logitechmouse.cpp:229 logitechmouse.cpp:233
msgid "Press Connect Button"
msgstr "請按連線按鈕"

#: logitechmouse.cpp:233
msgid ""
"RF channel 2 has been set. Please press Connect button on mouse to re-"
"establish link"
msgstr "RF 頻道 2 已經被設定了。請按滑鼠的連線按鈕來重新建立連結"

#: logitechmouse.cpp:370
msgid "none"
msgstr "無"

#: logitechmouse.cpp:373 logitechmouse.cpp:403
msgid "Cordless Mouse"
msgstr "無線滑鼠"

#: logitechmouse.cpp:376 logitechmouse.cpp:382 logitechmouse.cpp:385
msgid "Cordless Wheel Mouse"
msgstr "無線滾輪滑鼠"

#: logitechmouse.cpp:379
msgid "Cordless MouseMan Wheel"
msgstr "無線 MouseMan 滾輪"

#: logitechmouse.cpp:388
msgid "Cordless TrackMan Wheel"
msgstr "無線 TrackMan 滾輪"

#: logitechmouse.cpp:391
msgid "TrackMan Live"
msgstr "TrackMan Live"

#: logitechmouse.cpp:394
msgid "Cordless TrackMan FX"
msgstr "無線 TrackMan FX"

#: logitechmouse.cpp:397
msgid "Cordless MouseMan Optical"
msgstr "無線 MouseMan 光學"

#: logitechmouse.cpp:400
msgid "Cordless Optical Mouse"
msgstr "無線光學滑鼠"

#: logitechmouse.cpp:406
msgid "Cordless MouseMan Optical (2ch)"
msgstr "無線 MouseMan 光學 (2ch)"

#: logitechmouse.cpp:409
msgid "Cordless Optical Mouse (2ch)"
msgstr "無線光學滑鼠 (2ch)"

#: logitechmouse.cpp:412
msgid "Cordless Mouse (2ch)"
msgstr "無線滑鼠 (2ch)"

#: logitechmouse.cpp:415
msgid "Cordless Optical TrackMan"
msgstr "無線光學 TrackMan"

#: logitechmouse.cpp:418
msgid "MX700 Cordless Optical Mouse"
msgstr "MX700 無線光學滑鼠"

#: logitechmouse.cpp:421
msgid "MX700 Cordless Optical Mouse (2ch)"
msgstr "MX700 無線光學滑鼠 (2ch)"

#: logitechmouse.cpp:424
msgid "Unknown mouse"
msgstr "不明的滑鼠"

#: mouse.cpp:84
msgid ""
"<h1>Mouse</h1> This module allows you to choose various options for the way "
"in which your pointing device works. Your pointing device may be a mouse, "
"trackball, or some other hardware that performs a similar function."
msgstr ""
"<h1>滑鼠</h1>這個模組可以讓您選擇您指標設備工作的方式。 您的指標設備可能是滑"
"鼠,軌跡球或其他有類似功能的硬體。"

#: mouse.cpp:103
msgid "&General"
msgstr "一般(&G)"

#: mouse.cpp:108
msgid ""
"If you are left-handed, you may prefer to swap the functions of the left and "
"right buttons on your pointing device by choosing the 'left-handed' option. "
"If your pointing device has more than two buttons, only those that function "
"as the left and right buttons are affected. For example, if you have a three-"
"button mouse, the middle button is unaffected."
msgstr ""
"如果您使用左手,您可能希望透過「使用左手」的選項,來交換指標設備左右鍵的功"
"能。 如果您的指標設備有多於二個按鈕,只有左右的二個會交換。例如您有一個三鍵滑"
"鼠,則滑鼠的中間鍵將不受影響。"

#: mouse.cpp:118
msgid ""
"The default behavior in TDE is to select and activate icons with a single "
"click of the left button on your pointing device. This behavior is "
"consistent with what you would expect when you click links in most web "
"browsers. If you would prefer to select with a single click, and activate "
"with a double click, check this option."
msgstr ""
"TDE 點選並啟動圖示的預設動作,是使用指標的設備左鍵,並以單擊圖示的方式來進"
"行。這個動作就如同您在瀏覽器中,點選超連結的方式是相同的。如果您希望在單擊的"
"時候進行選取,而雙擊的時候進行啟動,那麼請選取這個選項。"

#: mouse.cpp:126
msgid "Activates and opens a file or folder with a single click."
msgstr "單擊滑鼠來開啟檔案或目錄。"

#: mouse.cpp:132
msgid ""
"If you check this option, pausing the mouse pointer over an icon on the "
"screen will automatically select that icon. This may be useful when single "
"clicks activate icons, and you want only to select the icon without "
"activating it."
msgstr ""
"如果您選擇了這個選項,那麼當滑鼠指標停在螢幕上的某個圖示上面時,這個圖示將會"
"自動的被選取。這對於當您使用單擊來啟動圖示,而您卻只想選取那個圖示的時候,會"
"非常的有用。"

#: mouse.cpp:144
msgid ""
"If you have checked the option to automatically select icons, this slider "
"allows you to select how long the mouse pointer must be paused over the icon "
"before it is selected."
msgstr ""
"如果您選擇了自動選取圖示的功能,這個滾軸可以讓您設定,滑鼠指標應該停留在圖示"
"上多久的時間,才會選取這個圖示。"

#: mouse.cpp:149
msgid "Show feedback when clicking an icon"
msgstr "敲擊圖示時顯示回應"

#: mouse.cpp:181
msgid "&Cursor Theme"
msgstr "游標佈景主題(&C)"

#: mouse.cpp:185
msgid "Advanced"
msgstr "進階"

#: mouse.cpp:191
msgid "Pointer acceleration:"
msgstr "指標加速:"

#: mouse.cpp:196
msgid ""
"This option allows you to change the relationship between the distance that "
"the mouse pointer moves on the screen and the relative movement of the "
"physical device itself (which may be a mouse, trackball, or some other "
"pointing device.)<p> A high value for the acceleration will lead to large "
"movements of the mouse pointer on the screen even when you only make a small "
"movement with the physical device. Selecting very high values may result in "
"the mouse pointer flying across the screen, making it hard to control."
msgstr ""
"這個選項可以讓您改變滑鼠指標在螢幕上移動與設備本身移動間的相對關係 (移動設備"
"可能是滑鼠,軌跡球或其他指標設備)。<p>即使是您只是稍微的移動,在較高的加速值"
"下,仍將使滑鼠在畫面上有較大的移動。選擇一個很高的加速值可能會讓您的指標飛快"
"的在畫面上移動,並且難以控制。<"

#: mouse.cpp:209
msgid "Pointer threshold:"
msgstr "指標界限:"

#: mouse.cpp:217
msgid ""
"The threshold is the smallest distance that the mouse pointer must move on "
"the screen before acceleration has any effect. If the movement is smaller "
"than the threshold, the mouse pointer moves as if the acceleration was set "
"to 1X;<p> thus, when you make small movements with the physical device, "
"there is no acceleration at all, giving you a greater degree of control over "
"the mouse pointer. With larger movements of the physical device, you can "
"move the mouse pointer rapidly to different areas on the screen."
msgstr ""
"這個界限是游標開始加速前必須移動的距離。 如果移動小於這個界限,游標將用正常速"
"度移動( 1X);<p>也就是說,當您只有移動設備一小段距離,則不會加速,讓您更容易"
"控制游標。而移動較大距離,則會加速,讓您可以在畫面上快速移動。"

#: mouse.cpp:229
msgid "Double click interval:"
msgstr "雙敲擊間隔:"

#: mouse.cpp:231 mouse.cpp:279 mouse.cpp:333 mouse.cpp:341 mouse.cpp:350
msgid " msec"
msgstr " 微秒"

#: mouse.cpp:236
msgid ""
"The double click interval is the maximal time (in milliseconds) between two "
"mouse clicks which turns them into a double click. If the second click "
"happens later than this time interval after the first click, they are "
"recognized as two separate clicks."
msgstr ""
"雙敲擊的間隔,是兩次滑鼠按鍵敲擊的最大間隔時間 (以微秒為單位)。如果第二次在經"
"過這段時間之後才發生,就會被視為二次獨立的敲擊。"

#: mouse.cpp:246
msgid "Double-click on the image below to test your double-click interval:"
msgstr ""

#: mouse.cpp:248
msgid ""
"The image will change when your double-click test time is less than or equal "
"to the interval you configured. When changing the interval, be sure to "
"select the Apply button before testing. For example, the image will not "
"change when you configure a double-click interval of 700 milliseconds and "
"the time between two successive clicks on the image is 800 milliseconds, but "
"the image will change when the time between clicks is 600 milliseconds. The "
"goal is to select a comfortable interval that you find is not too fast or "
"slow."
msgstr ""

#: mouse.cpp:277
msgid "Drag start time:"
msgstr "拖曳開始時間:"

#: mouse.cpp:284
msgid ""
"If you click with the mouse (e.g. in a multi-line editor) and begin to move "
"the mouse within the drag start time, a drag operation will be initiated."
msgstr "如果您按下滑鼠並開始拖曳 (例如在文字編輯器中),拖曳的動作將會被啟動。"

#: mouse.cpp:290
msgid "Drag start distance:"
msgstr "拖曳開始距離:"

#: mouse.cpp:298
msgid ""
"If you click with the mouse and begin to move the mouse at least the drag "
"start distance, a drag operation will be initiated."
msgstr "如果您按下滑鼠並移動超過拖曳開始距離,拖曳的動作將被啟動。"

#: mouse.cpp:304
msgid "Mouse wheel scrolls by:"
msgstr "滑鼠滾輪滾動由:"

#: mouse.cpp:312
msgid ""
"If you use the wheel of a mouse, this value determines the number of lines "
"to scroll for each wheel movement. Note that if this number exceeds the "
"number of visible lines, it will be ignored and the wheel movement will be "
"handled as a page up/down movement."
msgstr ""
"如果你使用滑鼠滾輪,這個數值就是你每次滾動滾輪將移動的行距。注意若是這個數值"
"超過了可以顯示的行數,那麼這項設定將會被忽略,並改為切換上/下頁的功能。"

#: mouse.cpp:318
msgid "Mouse Navigation"
msgstr "滑鼠瀏覽"

#: mouse.cpp:326
msgid "&Move pointer with keyboard (using the num pad)"
msgstr "使用鍵盤移動滑鼠游標(使用數字鍵)(&M)"

#: mouse.cpp:332
msgid "&Acceleration delay:"
msgstr "加速延遲(&A):"

#: mouse.cpp:340
msgid "R&epeat interval:"
msgstr "重複間隔(&E):"

#: mouse.cpp:348
msgid "Acceleration &time:"
msgstr "指標加速(&T):"

#: mouse.cpp:356
msgid "Ma&ximum speed:"
msgstr "最快速度(&X):"

#: mouse.cpp:358
msgid " pixel/sec"
msgstr " 像素/秒"

#: mouse.cpp:364
msgid "Acceleration &profile:"
msgstr "加速度設定(&p)"

#: mouse.cpp:437
msgid "Mouse"
msgstr "滑鼠"

#: mouse.cpp:438
msgid "(c) 1997 - 2005 Mouse developers"
msgstr "(c) 1997 - 2005 滑鼠開發者"

#: mouse.cpp:765 mouse.cpp:770
msgid ""
"_n:  pixel\n"
" pixels"
msgstr " 像素"

#: mouse.cpp:775
msgid ""
"_n:  line\n"
" lines"
msgstr " 行"

#: xcursor/themepage.cpp:79
msgid "XFree theme %1 - incomplete for TDE"
msgstr ""

#: xcursor/themepage.cpp:80
msgid "No description available"
msgstr "無相關說明"

#: xcursor/themepage.cpp:91
msgid "Select the cursor theme you want to use (hover preview to test cursor):"
msgstr "請選取你想使用的滑鼠游標佈景主題(可以在預覽測試游標):"

#: xcursor/themepage.cpp:111
msgid "Install New Theme..."
msgstr "安裝新佈置主題"

#: xcursor/themepage.cpp:112
msgid "Remove Theme"
msgstr "移除佈景主題"

#: xcursor/themepage.cpp:219
msgid "Drag or Type Theme URL"
msgstr "把佈景主題的網址拖拉到此,或是手動輸入"

#: xcursor/themepage.cpp:228
#, c-format
msgid "Unable to find the cursor theme archive %1."
msgstr "無法找到這個游標佈景主題的檔案庫 %1。"

#: xcursor/themepage.cpp:230
msgid ""
"Unable to download the cursor theme archive; please check that the address "
"%1 is correct."
msgstr "無法下載游標佈景主題的檔案庫;請確定網址 %1 是否正確。"

#: xcursor/themepage.cpp:238
msgid "The file %1 does not appear to be a valid cursor theme archive."
msgstr "檔案 %1 並不是一個游標佈景主題"

#: xcursor/themepage.cpp:247
msgid ""
"<qt>Are you sure you want to remove the <strong>%1</strong> cursor theme?"
"<br>This will delete all the files installed by this theme.</qt>"
msgstr ""
"<qt>你確定要移除 <strong>%1</strong> 佈景主題嗎?<br>這個動作會刪除所有和這個"
"佈景主題相關的檔案。</qt>"

#: xcursor/themepage.cpp:253
msgid "Confirmation"
msgstr "確認"

#: xcursor/themepage.cpp:307
msgid ""
"A theme named %1 already exists in your icon theme folder. Do you want "
"replace it with this one?"
msgstr "一個叫做 %1 的佈景主題已經存在於系統中。請問您要取代它嗎?"

#: xcursor/themepage.cpp:309
msgid "Overwrite Theme?"
msgstr "覆蓋這個佈景主題?"

#: xcursor/themepage.cpp:544
msgid "No theme"
msgstr "無佈景主題"

#: xcursor/themepage.cpp:544
msgid "The old classic X cursors"
msgstr "舊式的 X 游標"

#: xcursor/themepage.cpp:546
msgid "System theme"
msgstr "系統佈景主題"

#: xcursor/themepage.cpp:546
msgid "Do not change cursor theme"
msgstr "不要改變游標的主題"

#: kmousedlg.ui:38
#, no-c-format
msgid "Button Order"
msgstr "按鍵順序"

#: kmousedlg.ui:89
#, no-c-format
msgid "Righ&t handed"
msgstr "使用右手(&T)"

#: kmousedlg.ui:100
#, no-c-format
msgid "Le&ft handed"
msgstr "使用左手(&F)"

#: kmousedlg.ui:132
#, no-c-format
msgid "Re&verse scroll direction"
msgstr "反相捲動(&V)"

#: kmousedlg.ui:135
#, no-c-format
msgid ""
"Change the direction of scrolling for the mouse wheel or the 4th and 5th "
"mouse buttons."
msgstr "改變滑鼠滾輪捲動的方向或是第四鍵和第五鍵。"

#: kmousedlg.ui:143
#, no-c-format
msgid "Icons"
msgstr "圖示"

#: kmousedlg.ui:154
#, no-c-format
msgid "Dou&ble-click to open files and folders (select icons on first click)"
msgstr "點兩下開啟檔案或目錄(按第一下為選取)"

#: kmousedlg.ui:179
#, no-c-format
msgid "Visual f&eedback on activation"
msgstr "啟動時使用視覺化回應(&V)"

#: kmousedlg.ui:187
#, no-c-format
msgid "Cha&nge pointer shape over icons"
msgstr "遊標停在圖示上時改變游標形狀(&N)"

#: kmousedlg.ui:198
#, no-c-format
msgid "A&utomatically select icons"
msgstr "自動選取圖示(&U)"

#: kmousedlg.ui:231
#, no-c-format
msgid "Short"
msgstr "短"

#: kmousedlg.ui:273
#, no-c-format
msgid "Dela&y:"
msgstr "延遲(&Y):"

#: kmousedlg.ui:284
#, no-c-format
msgid "Long"
msgstr "長"

#: kmousedlg.ui:316
#, no-c-format
msgid "&Single-click to open files and folders"
msgstr "使用單擊來開啟檔案或目錄(&S)"

#: logitechmouse_base.ui:24
#, no-c-format
msgid "Cordless Name"
msgstr "無線名稱"

#: logitechmouse_base.ui:32
#, no-c-format
msgid ""
"You have a Logitech Mouse connected, and libusb was found at compile time, "
"but it was not possible to access this mouse. This is probably caused by a "
"permissions problem - you should consult the manual on how to fix this."
msgstr ""
"您連接了羅技滑鼠,而且也在編譯時找到 libusb,但是仍無法使用這個滑鼠。這可能是"
"權限的問題 - 您應該參考手冊以了解如何修正它。"

#: logitechmouse_base.ui:46
#, no-c-format
msgid "Sensor Resolution"
msgstr "偵測器解析度"

#: logitechmouse_base.ui:60
#, no-c-format
msgid "400 counts per inch"
msgstr "每英吋 400 次"

#: logitechmouse_base.ui:71
#, no-c-format
msgid "800 counts per inch"
msgstr "每英吋 800 次"

#: logitechmouse_base.ui:87
#, no-c-format
msgid "Battery Level"
msgstr "電池電量"

#: logitechmouse_base.ui:111
#, no-c-format
msgid "RF Channel"
msgstr "RF 頻道"

#: logitechmouse_base.ui:125
#, no-c-format
msgid "Channel 1"
msgstr "頻道 1"

#: logitechmouse_base.ui:142
#, no-c-format
msgid "Channel 2"
msgstr "頻道 2"