Move the khelpcenter guides to the directory level in which they are installed.

Signed-off-by: Slávek Banko <[email protected]>

4 files changed, 0 insertions, 3341 deletions

diff --git a/doc/adminguide/CMakeLists.txt b/doc/adminguide/CMakeLists.txt
deleted file mode 100644
index ec8d87dac..000000000
--- a/doc/adminguide/CMakeLists.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-#################################################
-#
-#  Improvements and feedback are welcome
-#
-#  This file is released under GPL >= 2
-#
-#################################################
-
-tde_create_handbook( DESTINATION khelpcenter/adminguide )
diff --git a/doc/adminguide/Makefile.am b/doc/adminguide/Makefile.am
deleted file mode 100644
index 86108a74b..000000000
--- a/doc/adminguide/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-KDE_LANG = en
-KDE_DOCS = khelpcenter/adminguide
-
diff --git a/doc/adminguide/groupware-kontact.docbook b/doc/adminguide/groupware-kontact.docbook
deleted file mode 100644
index e1a8db623..000000000
--- a/doc/adminguide/groupware-kontact.docbook
+++ /dev/null
@@ -1,596 +0,0 @@
-<chapter id="groupware-with-kontact">
-
-<chapterinfo>
-<authorgroup>
-<author>
-<personname>
-<firstname>Marco</firstname>
-<surname>Menardi</surname>
-</personname>
-<email>[email protected]</email>
-</author>
-</authorgroup>
-
-<!-- TRANS:ROLES_OF_TRANSLATORS -->
-
-</chapterinfo>
-<title>Sharing data with &kontact; via <acronym>IMAP</acronym></title>
-
-<sect1 id="kontact-imap-intro">
-<title>Introduction</title>
-
-<para>For my small office, I was looking for a long time for a
-<acronym>PIM</acronym> solution that let me share data, so my secretary and
-I can share contacts, appointments and so on. Being a &tde; user, I've heard
-about the Kroupware project and wait its completion. But when I saw how
-complicated is the architecture and setup of the
-<application>Kolab</application> server 1.0 (the server side of the
-project), I gave up, waiting for an easier to deploy
-<application>Kolab</application> 2.0. In any case, the
-<application>Kolab</application> stuff was clearly too much for my
-needs. Fortunately in the &tde; wiki I've found some piece of
-<acronym>IRC</acronym> conversation where they were talking about sharing
-data without the <application>Kolab</application> infrastructure... mmm so
-interesting!</para>
-
-<para>For small offices and needs, you can have &kontact; use shared data
-without the need of installing the <application>Kolab</application> server
-or another groupware backend. It can work with just an
-<acronym>IMAP</acronym> server, that can be easily set up.</para>
-
-<para>My scenario is a server with Debian unstable and &kde; 3.4. I access
-&kontact; and other fabulous GNU/Linux apps from windows using Cygwin/X,
-while waiting Wine project to be able to run the last Windows programs I
-need (and that are not available under GNU/Linux). I want to share contacts,
-events, todo, notes with my secretary.</para>
-
-</sect1>
-
-<sect1 id="kontact-imap-whatis">
-<title>What is <acronym>IMAP</acronym></title>
-
-<para>This definition is from the <ulink
-url="http://computeruser.com">ComputerUser.com High-Tech Dictionary:</ulink>
-<blockquote><para>Internet Message Access Protocol. A protocol that allows a
-user to perform certain electronic mail functions on a remote server rather
-than on a local computer. Through IMAP the user can create, delete, or
-rename mailboxes; get new messages; delete messages; and perform search
-functions on mail. A separate protocol is required for sending mail. Also
-called Internet Mail Access Protocol.</para></blockquote> </para>
-
-<para>So it can be considered a data storage. To use it you you need an
-<acronym>IMAP</acronym> server, such as <application>Cyrus</application>,
-<application>Courier</application> or <application>UW</application>.</para>
-
-</sect1>
-
-<sect1 id="kontact-kolab-or-imap">
-<title><application>Kolab</application> or <acronym>IMAP</acronym>?</title>
-
-<para><application>Kolab</application> brings the ability to share data
-between different clients. It makes possible for your secretary to use
-<application>Outlook</application> and you use &kontact;, for
-instance.</para>
-
-<para>You will have a configuration interface which does user management, mail
-account setup, a central <acronym>LDAP</acronym> config data and addressbook
-server, spam and virus filtering, vacation scripts, free busy list handling,
-resource handling (rooms, cars), groups, distribution lists, automatic
-invitation handling, &etc;</para>
-
-<para>But that can cause initial setup troubles. For a newbie like me it
-means: a long long frustrating nightmare, and too much complexity to manage
-once working. So no, thanks, I'll go to simple
-<acronym>IMAP</acronym>.</para>
-
-</sect1>
-
-<sect1 id="kontact-imap-cyrus">
-<title>How to set up <acronym>IMAP</acronym> server <application>Cyrus</application></title>
-
-<para>My choice is <application>Cyrus</application>, that is part of the
-<application>Kolab</application> set of software, so if l will go for
-<application>Kolab</application> in the future, at least I'm acquainted with
-it.</para> <para>Let's start the installation and the setup!</para>
-
-<para>Become <systemitem class="username">root</systemitem>.</para>
-
-<screen># <userinput><command>apt-get</command> <command>install</command> cyrus21-imapd cyrus21-common cyrus21-admin cyrus21-client sasl-bin sasl2-bin</userinput>
-<computeroutput>Installing cyrus21-imapd...</computeroutput><lineannotation>The installer asks something I've not understood about an search address... I just pressed <keycap>Enter</keycap></lineannotation>.</screen>
-
-<para>The installer also created the user <systemitem
-class="username">cyrus</systemitem> that is in the (automatically created)
-group <systemitem class="groupname">sasl</systemitem>, that is the
-<quote>owner</quote> of all cyrus files. At the end with <command>ps
-<option>-A</option></command> you can find the new processes:
-<command>cyrmaster</command> and <command>notifyd</command>.</para>
-
-<para>The real problem in setting up <application>Cyrus</application> is the
-authentication, just because it's not trivial and I'm a newbie, with limited
-knowledge about what I'm doing.</para>
-
-<para><application>Cyrus</application> can use different
-<acronym>SASL</acronym> (Simple Authentication and Security Layer)
-mechanisms, the default being sasldb (it stores usernames and passwords in
-the SASL secrets file <filename>sasldb</filename>), but also getpwent,
-kerberos4, kerberos5, PAM, rimap, shadow and LDAP are supported.</para>
-
-<para> Since I don't want to define users/passwords different than the ones
-that access my &Linux; box I choose then <quote>shadow</quote> mechanism so
-<application>Cyrus</application> will use &Linux; passwords for
-authenticate.</para>
-
-<para>To do so we have to tell sasl to use <command>saslauthd</command> as
-password authentication method, and then setup <command>saslauthd</command>
-to use <quote>shadow</quote> (or <quote>getpwent</quote>) as the
-authentication mechanism.</para>
-
-<para>OK, let's start!</para>
-
-<para>As <systemitem class="username">root</systemitem>, change the Linux
-password of <systemitem class="username">cyrus</systemitem> user:</para>
-
-<screen># <userinput><command>passwd <option>cyrus</option></command></userinput></screen>
-
-<para>Enter the password you like (and you will remember) we will use for
-this example <quote>cyrus</quote> as the <application>cyrus</application>
-administrator password.</para>
-
-<screen># <command>vi</command> <filename>/etc/imapd.conf</filename></screen>
-
-<programlisting>sasl_pwcheck_method: <userinput>saslauthd</userinput> <lineannotation>instead of the default <literal>auxprop</literal></lineannotation></programlisting>
-
-<para>remove the <literal>#</literal> remark from the line:</para>
-
-<programlisting>#admins: cyrus</programlisting>
-
-<para>this way you can administer <application>cyrus</application> logging
-in as <systemitem class="username">cyrus</systemitem> user (what a fantasy I
-have!)</para>
-
-<screen># <userinput><command>vi</command> <filename>/etc/default/saslauthd</filename></userinput></screen>
-
-<para>Uncomment the line:</para>
-
-<programlisting># START=yes</programlisting>
-
-<para>(otherwise the <application>saslauthd</application> will not start at
-boot time, even if referenced in some <filename
-class="directory">/etc/rcx.d</filename>!)</para>
-
-<para>and instead of <literal>MECHANISMS="pam"</literal> put
-<userinput>MECHANISMS="shadow"</userinput> this way at the boot a
-<command>saslauthd</command> <option>-a
-<parameter>shadow</parameter></option> will be executed.</para>
-
-<para>Once exited from your editor, restart <application>sasl</application>
-and <application>cyrus</application>.</para>
-
-<para>To test <acronym>IMAP</acronym>:</para>
-
-<screen> <userinput><command>su</command> <option>cyrus</option></userinput>
-$ <userinput><command>imtest</command> <option>-m login -p imap localhost</option></userinput></screen>
-
-<para>You are prompted for the <systemitem
-class="username">cyrus</systemitem> (user) password, so enter it.</para>
-
-<para>If the user <systemitem class="username">cyrus</systemitem> is
-correctly authenticated, the following lines will appear:</para>
-
-<screen><computeroutput>S: L01 OK User logged in
-Authenticated.</computeroutput></screen>
-<para>To exit type <userinput>. logout</userinput> (&ie; dot space <quote>logout</quote>)</para>
-
-<para>Now add a user named <systemitem
-class="username">groupware</systemitem> and set a password for it, using
-your usual system tools. It should be in an unprivileged group such as
-<systemitem class="groupname">nobody</systemitem> and does not require a
-login shell or a home directory.</para>
-
-<para>Now I have to create the user and an <acronym>IMAP</acronym> in
-<application>cyrus</application> also:</para>
-
-<screen># <userinput><command>cyradm</command> <option>--user cyrus localhost</option></userinput>
-after entering the password for the admin user <systemitem class="username">cyrus</systemitem>, you get the prompt <prompt>localhost&gt;</prompt>
-<prompt>localhost&gt;</prompt> <userinput><command>cm</command> <option>user.groupware</option></userinput>
-<prompt>localhost&gt;</prompt> <userinput><command>lm</command></userinput> <lineannotation>lists the mailbox only just created</lineannotation>
-<computeroutput>user.groupware (\HasNoChildren))</computeroutput>
-<prompt>localhost&gt;</prompt> <userinput><command>quit</command></userinput></screen>
-
-<para>You can type <userinput><command>help</command></userinput> for a list
-of available commands.</para>
-
-<para>You can check what has happened with:</para>
-
-<screen># <userinput><command>ls</command> <option>-l</option> <filename class="directory">/var/spool/cyrus/mail/g/user/groupware</filename></userinput>
-<computeroutput>total 12
--rw------- 1 cyrus mail          4 Oct 29 20:55 cyrus.cache
--rw------- 1 cyrus mail 155 Oct 29 20:55 cyrus.header
--rw------- 1 cyrus mail 76 Oct 29 20:55 cyrus.index</computeroutput></screen>
-
-<para>Now you should be able to connect with an <acronym>IMAP</acronym> client
-as the <systemitem class="username">groupware</systemitem> user and see the
-<literal>INBOX</literal>.</para>
-<note><para>In the <acronym>IMAP</acronym> protocol, selecting the mailbox
-<literal>INBOX</literal> is a magic word, a sort of <quote>alias</quote> for
-the above directory structure. The client sees <literal>INBOX</literal>, and
-the <acronym>IMAP</acronym> server maps it in the <filename
-class="directory">/var/spool/cyrus/mail/...</filename> folder and file
-structure.</para></note>
-
-</sect1>
-
-<sect1 id="kontact-imap-clients">
-<title>How to setup &kontact; clients</title>
-
-<para>I connect to my GNU/Linux office server PC (a sort of "black box"
-without monitor and keyboard) from 2 &Windows; 2000 PC with
-<application>Cygwin/X</application>, using them as a X-Window server (in the
-near future I hope to replace both with 2 mini-itx thin clients using the
-LTSP). With this setup every user runs &kontact; on the same machine where
-<application>Cyrus</application> is installed and running
-(localhost).</para>
-
-<para>To have &kontact; work with <acronym>IMAP</acronym>, there are these
-steps to complete:</para>
-
-<procedure>
-
-<step><para>Create an <acronym>IMAP</acronym> account on the
-<application>Cyrus</application> for fake <systemitem
-class="username">groupware</systemitem> user (already previously
-done!)</para></step>
-
-<step><para>Create/configure an <acronym>IMAP</acronym> account in &kmail;
-for login as that user</para></step> <step><para>Use tderesources to make
-&kontact; components work with data taken from <acronym>IMAP</acronym>
-source</para></step>
-
-<step><para>Enable groupware functionality and make related subfolders of
-that <acronym>IMAP</acronym> <literal>INBOX</literal> (if not
-already)</para></step>
-
-<step><para>Enjoy &kontact; and shared data through
-<application>Cyrus</application> IMAP</para></step>
-
-</procedure>
-
-<para>So login to &tde; with the first <quote>real user</quote> account you
-want to provide groupware functionality to.</para>
-
-<para>Let's create the IMAP account in &kmail;.</para>
-
-<para>Run &kontact; and select <guilabel>Mail</guilabel> (the &kmail;
-component). From the menu choose
-<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure KMail
-</guimenuitem><guilabel>Accounts</guilabel><guilabel>Receiving</guilabel></menuchoice> tab, press the <guibutton>Add...</guibutton> button. You will then be
-prompted for the type of your email account, and select
-<guilabel>disconnected IMAP</guilabel> (not just
-<guilabel>IMAP</guilabel>). Then in the <guilabel>General</guilabel> tab
-enter the following data:</para>
-
-<variablelist>
-<varlistentry>
-<term><guilabel>Account Name:</guilabel> <userinput>office_gwdata</userinput></term>
-<listitem>
-<para>A name that will be used for the <quote>local</quote> folder that
-points to this <acronym>IMAP</acronym> account.</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><guilabel>Login:</guilabel> <userinput>groupware</userinput></term>
-<listitem>
-<para>The <application>Cyrus</application> user we have chosen as
-<quote>owner</quote> of all of the office data</para>
-</listitem>
-</varlistentry>
-<varlistentry><term><guilabel>Password:</guilabel></term>
-<listitem>
-<para>The password of the <systemitem
-class="username">groupware</systemitem> user.</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><guilabel>Host:</guilabel> <userinput>localhost</userinput></term>
-<listitem>
-<para>Remember for our example, the &kontact; client runs on the same
-computer as the <acronym>IMAP</acronym> server</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><guilabel>Port:</guilabel> <userinput>143</userinput></term>
-<listitem>
-<para>The default</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<para>Check <guilabel>store IMAP password</guilabel>
-so you will not be asked for it next time you run &kontact;. Check the
-<guilabel>Enable interval mail checking</guilabel> and set a value in
-minutes.</para>
-
-<para>Note that we have checked the <guilabel>disconnected IMAP</guilabel>
-type account. This has the effect that a copy of the groupware data is
-stored <quote>locally</quote> to the client (under the home folder), and it
-is synchronized every time the client connects. This seems very inefficient,
-since your data is duplicated many times (&ie; if you have 10 users that use
-&kontact;, you have 10+1 times the data), but it is the only way to make
-things run fast, because at every connection &kontact; has to fetch all data
-and have &korganizer; and &kaddressbook; interpret it. If you use
-<quote>disconnected IMAP</quote> data is cached locally, and only the
-<quote>delta</quote> (&ie; the data that has changed) is sent.</para>
-
-<para>On the other end, if your users run &korganizer; on the same PC that
-runs the <acronym>IMAP</acronym> server, it seems reasonable to use
-<acronym>IMAP</acronym> (that is called <quote>online IMAP</quote>) to save
-space, since transfer speed should not be an issue. But unfortunately this
-does not work because &kontact; does not update automatically the
-<guilabel>Calendar</guilabel> folder in <quote>online IMAP</quote>, so you
-are not updated when someone adds events (you must manually switch to
-&kmail; application and click on the <guilabel>Calendar</guilabel>
-folder). In addition, at start up when it does read
-<guilabel>Calendar</guilabel> folders, you may see a tremendous flicker and
-slow data updates.</para>
-
-<para>Now we have to tell &kontact; to use <acronym>IMAP</acronym> as the
-data source for it's various components. From the &kmenu;, choose
-<guimenuitem>Run command</guimenuitem>, run <userinput><command>tdecmshell
-tderesources</command></userinput>. In the combo box select
-<guilabel>Contacts</guilabel>, then press the <guibutton>Add...</guibutton>
-button, and choose <guilabel>Addressbook on IMAP Server via KMail</guilabel>. Then select that new line and
-press <guibutton>Use as Standard</guibutton> button. Do the same for
-<guilabel>Calendar</guilabel> and <guilabel>Notes</guilabel>.</para>
-
-<para>Now we have to enable the &kmail; (and as a consequence, the whole
-&kontact;) groupware functionality:</para>
-
-<procedure>
-<step>
-<para>Choose from the menu
-<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
-KMail</guimenuitem><guilabel>Misc</guilabel><guilabel>Groupware</guilabel></menuchoice></para>
-</step>
-<step>
-<para>Check <guilabel>Enable IMAP resource functionality</guilabel></para>
-</step>
-<step>
-<para>Choose <guilabel>English</guilabel> as <guilabel>Language of the
-groupware folders</guilabel> (this is in case you already have the folders
-in the <acronym>IMAP</acronym> server created by a different program in a
-different language).</para>
-</step>
-<step>
-<para>Now move to <guilabel>Resource folder are in account</guilabel> and
-select the the <guilabel>Inbox</guilabel> subfolder of the
-<guilabel>office_gwdata</guilabel> folder.</para>
-<para>Leave <guilabel>Hide groupware folders</guilabel> unchecked for now,
-so we can see that happens. You can return here and check it once everything
-is clear.</para>
-</step>
-<step>
-<para>When you press OK you are prompted with:
-<computeroutput>&kmail; will now create the required folders for the IMAP
-resource as subfolders of Inbox</computeroutput> </para>
-<para>If you do not want this, press <guibutton>No</guibutton>, and the
-<acronym>IMAP</acronym> resource will be disabled.  Press
-<guibutton>Yes</guibutton> (this happens only the first time with the first
-<quote>real user</quote>).  You will immediately see that in the &kmail;
-folder tree, under
-<menuchoice><guilabel>office_gwdata</guilabel><guilabel>Inbox</guilabel></menuchoice>
-these subfolders are created:</para>
-<simplelist>
-<member>Calendar</member>
-<member>Contacts</member>
-<member>Notes</member>
-<member>Tasks</member>
-<member>Journal</member>
-</simplelist>
-<para>if you now do a:</para>
-<screen># <command>ls</command> <option>-l /var/spool/cyrus/mail/g/user/groupware/</option>
-<computeroutput>drwx------ 2 cyrus mail 144 Oct 31 16:36 Calendar
-drwx------ 2 cyrus mail 144 Oct 31 16:36 Contacts
-drwx------ 2 cyrus mail 144 Oct 31 16:36 Journal
-drwx------ 2 cyrus mail 144 Oct 31 16:36 Notes
-drwx------ 2 cyrus mail 144 Oct 31 16:36 Tasks
--rw------- 1 cyrus mail      4 Oct 31 15:28 cyrus.cache
--rw------- 1 cyrus mail 155 Oct 29 20:55 cyrus.header
--rw------- 1 cyrus mail 76 Oct 31 15:28 cyrus.index</computeroutput></screen>
-
-<para>As you see, the <guilabel>office_gwdata Inbox</guilabel> is stored not
-local to the &kontact; current user home, but in the <acronym>IMAP</acronym>
-<systemitem class="username">groupware</systemitem> user's folders.</para>
-</step>
-</procedure>
-
-<para>Now &kontact; is ready to work and store data there.  In the calendar
-application, if &kmail; <acronym>IMAP</acronym> account was of type
-<quote>disconnected</quote>, the <guilabel>resource</guilabel> window should
-display the item <guilabel>Imap resource</guilabel> with 3 subitems, that
-are paths to local home files. Instead, the <guilabel>Contacts</guilabel>
-application does not show subitems below the <guilabel>Imap
-resource</guilabel>.</para>
-
-<para>You can now login to &tde; with a different username and set up
-his/her &kontact; client in a very similar manner:</para>
-
-<procedure>
-<step>
-<para>Open &kontact; and in the <guilabel>Mail</guilabel> component add an
-<acronym>IMAP</acronym> account specifying as <guilabel>host</guilabel> the
-computer where <application>Cyrus</application> server runs (in my case:
-<literal>192.168.1.3</literal>).</para>
-
-<para>Remember to check the <guilabel>Enable interval mail
-checking</guilabel> and set a value in minutes. When  you confirm, you are
-not prompted for the subfolder creation (since they are found in the
-<acronym>IMAP</acronym> server), and you see them in the folder tree.</para>
-</step>
-<step>
-<para>Activate the groupware functionality to be able to save data in the
-<acronym>IMAP</acronym> server.</para>
-</step>
-</procedure>
-<para>Beware that in <quote>disconnected <acronym>IMAP</acronym></quote>,
-data are transmitted from a client to  <acronym>IMAP</acronym> server only
-when the clients connects to check for new mail. So if you have your
-&kontact; clients with an <guilabel>interval mail checking</guilabel> of,
-for instance, 5 minutes, in the worst  case you have a 10 minutes delay
-between the event being written and it's appearance to the other
-users.</para>
-</sect1>
-<sect1 id="kontact-imap-readonly">
-<title>How to have Read Only Access</title>
-
-<note><para>Beware that I've been confirmed that Notes
-<acronym>IMAP</acronym> implementation in &kontact; prior to version 1.01 is
-broken, so this setup will not work for them, so you want to use them, you
-need to use the previous setup.</para></note>
-
-<para>In the previous setup, we have the same <quote>fake</quote> user, named
-<systemitem class="username">groupware</systemitem>, that is used by all the
-<quote>real</quote> &kontact; users (&ie; <systemitem
-class="username">tony</systemitem>, <systemitem
-class="username">rohn</systemitem>, <systemitem
-class="username">amanda</systemitem>, &etc;) through the
-<acronym>IMAP</acronym> account with it's login and password. But this way
-every real user has the same read/write permissions of the others, since
-everyone connects as the user <systemitem
-class="username">groupware</systemitem> to the <acronym>IMAP</acronym>
-server.</para>
-
-<para>To limit access to some users (typically, providing read-only access),
-we can use the <acronym>ACL</acronym> (Access Control Lists).</para>
-
-<para>Select in &kmail; a subfolder of <guilabel>office_gwdata</guilabel>
-inbox, for instance <guilabel>Calendar</guilabel>, and right click the
-mouse. Select <guilabel>Properties</guilabel><guilabel>Access
-Control</guilabel> tab. Here you can enter the users you want give access to
-this folder and what they can do.</para>
-
-<para>Just to experiment trying to exchange events, we give
-<quote>All</quote> permission to the user <systemitem
-class="username">mary</systemitem></para>
-
-<para>At <application>cyrus</application> level (in the
-<acronym>PC</acronym> that runs <acronym>IMAP</acronym> server cyrus, with
-<application>cyrus</application> tools), we first need to add the user
-<systemitem class="username">mary</systemitem>, so it's an
-<acronym>IMAP</acronym> recognized user, and create an
-<acronym>IMAP</acronym> folder for her.</para>
-
-<para>Then we login to GNU/Linux as <systemitem
-class="username">mary</systemitem> and enter &kontact;. As previously shown,
-we will setup an <acronym>IMAP</acronym> account in &kmail; with the same
-data but the one of the user (instead of the fake user <systemitem
-class="username">groupware</systemitem> and it's password, we will use
-<systemitem class="username">mary</systemitem> and her password).</para>
-
-<para>In &kmail; folder tree, this time you will see this structure:
-<menuchoice><guimenu>office_gwdata</guimenu><guisubmenu>user</guisubmenu>
-<guisubmenu>groupware</guisubmenu><guimenuitem>Calendar and
-Tasks</guimenuitem></menuchoice>. Check the mail
-(<menuchoice><guimenu>File</guimenu><guimenuitem>Check
-Mail</guimenuitem></menuchoice>) and you will also have an
-<quote>inbox</quote> folder under <quote>office_gwdata</quote>.</para>
-
-<para>Now enable &kmail; groupware functionality, and in <guilabel>Resource
-folders are subfolders of</guilabel> put the
-<guimenuitem>inbox</guimenuitem> that is subfolder of
-<quote>office_gwdata</quote>.</para>
-
-<para>Now enable &kmail; groupware functionality, and in <guilabel>Resource
-folders are subfolders of</guilabel> put the
-<guimenuitem>inbox</guimenuitem> that is subfolder of
-<guisubmenu>office_gwdata</guisubmenu>.</para>
-
-<para>Now you have two branches of folder under
-<quote>office_gwdata</quote>:</para>
-
-<orderedlist>
-<listitem>
-<para><quote>inbox</quote> with Calendar, Contacts, Notes, Tasks and
-Journal, that are saved on <systemitem class="username">mary</systemitem>
-<acronym>IMAP</acronym> folders on the <acronym>IMAP</acronym> server</para>
-</listitem>
-<listitem>
-<para><quote>user</quote>, with the subfolder <quote>groupware</quote> and
-the subfolders to which <systemitem class="username">mary</systemitem> has
-access to (in this example, Calendar and Tasks)</para>
-</listitem>
-</orderedlist>
-<para>&RMB; click on the <quote>user</quote> <quote>Calendar</quote> and
-check if it's of type Calendar (if not, set it to be), and also if
-<quote>user</quote><quote>Tasks</quote> is of type Tasks.</para>
-<para>Now in Calendar you have two available <acronym>IMAP</acronym>
-resources to write against, so if you create a new event, you are prompted
-which one use (or if you left the local resources available, you have
-3!).</para>
-<para>You have go to the lower left small window in Calendar, the one that
-shows available resources, and uncheck the ones that don't point to
-<guilabel>.groupware.directory</guilabel> path (see the tail part of each
-resource path).</para>
-
-</sect1>
-
-<sect1 id="kontact-imap-credits">
-<title>Credits</title>
-
-<para>I'm a newbie, and for this howto I've only provided my time and my
-will. For the knowledge I have really to thank some guys in freenode
-channels for their competence, patience and helpfulness.</para>
-
-<itemizedlist>
-<title>Special thanks to:</title>
-<listitem>
-<para>For the <application>Cyrus</application> <acronym>IMAP</acronym> part
-in #cyrus channel:</para>
-<itemizedlist>
-<listitem>
-<para>[protagonist] Andy Morgan <email>[email protected]</email></para>
-</listitem>
-<listitem>
-<para>[plixed] Okke Timm <email>[email protected]</email></para>
-</listitem>
-</itemizedlist>
-</listitem>
-<listitem>
-<para>For the &kontact; part in #kontact channel:</para>
-<itemizedlist>
-<listitem>
-<para>[till] Till Adam <email>[email protected]</email></para>
-</listitem>
-<listitem>
-<para>[dfaure] David Faure <email>[email protected]</email></para>
-</listitem>
-<listitem>
-<para>[mdouhan] Matt Douhan <email>[email protected]</email></para>
-</listitem>
-</itemizedlist>
-</listitem>
-</itemizedlist>
-
-<para>Thank a lot guys!</para>
-
-<para>Ah, and there is also me, [markit] Marco Menardi
-<email>[email protected]</email></para>
-
-</sect1>
-
-<sect1 id="kontact-imap-further-reading">
-<title>Further Reading</title>
-
-<itemizedlist>
-<title>Reference</title>
-<listitem><para>KDE: <ulink url="http://www.kde.org">http://www.kde.org</ulink></para></listitem>
-<listitem><para>&kontact; website: <ulink url="http://www.kontact.org">http://www.kontact.org</ulink></para></listitem>
-<listitem><para>Kroupware project: <ulink url="http://www.kroupware.org">http://www.kroupware.org</ulink></para></listitem>
-<listitem><para>&kde; Community Wiki: <ulink url="http://wiki.kde.org">http://wiki.kde.org</ulink></para></listitem>
-<listitem><para>Wine project: <ulink url="http://www.winehq.org">http://www.winehq.org</ulink></para></listitem>
-<listitem><para>Cygwin/X project <ulink url="http://x.cygwin.com">http://x.cygwin.com</ulink></para></listitem>
-<listitem><para>LTSP project: <ulink url="http://www.ltsp.org">http://www.ltsp.org</ulink></para></listitem>
-</itemizedlist>
-
-</sect1>
-
-</chapter>
diff --git a/doc/adminguide/index.docbook b/doc/adminguide/index.docbook
deleted file mode 100644
index dd24a1cdc..000000000
--- a/doc/adminguide/index.docbook
+++ /dev/null
@@ -1,2733 +0,0 @@
-<?xml version="1.0" ?>
-  <!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [
-  <!ENTITY % addindex "INCLUDE">
-  <!ENTITY % imageobjectco.module "INCLUDE">
-  <!ENTITY groupware-with-kontact SYSTEM "groupware-kontact.docbook">
-  <!ENTITY % English "INCLUDE">
-]>
-
-<book lang="&language;">
-
-<bookinfo>
-
-<title>The &tde; (Trinity Desktop Environment) Administrator Guide</title>
-
-<authorgroup>
-<author>&tde-authors;</author>
-<!-- TRANS:ROLES_OF_TRANSLATORS -->
-</authorgroup>
-
-<copyright>
-<year>2004-2005</year>
-<holder>The &kde; Team</holder>
-</copyright>
-<copyright>
-<year>&tde-copyright-date;</year>
-<holder>&tde-team;</holder>
-</copyright>
-
-<!-- <legalnotice>&FDLNotice;</legalnotice> -->
-
-<date>&tde-release-date;</date>
-<releaseinfo>&tde-release-version;</releaseinfo>
-
-<abstract>
-<para>A general administrator guide to the Trinity Desktop Environment.
-</para>
-
-<para>Please report problems with this document to
-<email>[email protected]</email>.
-</para>
-</abstract>
-
-<keywordset>
-<keyword>TDE</keyword>
-<keyword>administration</keyword>
-<keyword>desktop</keyword>
-<keyword>handbook</keyword>
-<keyword>tutorial</keyword>
-</keywordset>
-
-</bookinfo>
-
-<chapter id="tde-for-admins-introduction">
-<title>&tde; for Administrators</title>
-
-<sect1 id="tde-for-admins-overview">
-<title>Overview</title>
-
-<para>This handbook is a reference guide to
-some &tde; features that are useful to administrators configuring
-multi-user systems. This guide also has information useful
-to &tde; users with single-user systems: where configuration files are
-stored, what environment variables affect &tde;, and so on. The KIOSK
-framework is the &tde; system that allows administrators to limit
-what users can do in &tde;. That framework is useful in many
-situations, but especially for running single-function kiosks with,
-for example, only a web browser, hence the name.</para>
-
-</sect1>
-
-<sect1 id="directory-layout">
-<title>Directory Layout</title>
-
-<para>&tde; defines a filesystem hierarchy which is used by the &tde;
-environment itself as well as all &tde; applications. In general &tde;
-stores all its files in a directory tree with a fixed structure.
-</para>
-
-<para>By default &tde; uses two directory trees:</para>
-
-<itemizedlist>
-<listitem><para>One at the system level (for example <filename
-class="directory">/opt/trinity</filename>).</para></listitem>
-<listitem><para>One at the user level in the user's home directory
-(usually <filename class="directory">
-~/.trinity</filename>)</para></listitem>
-</itemizedlist>
-
-<para>As a system administrator you can create additional trees. Such
-additional trees can be used for <link
-linkend="user-profiles">profiles</link></para>
-
-<informalexample><para>For example:</para>
-
-<itemizedlist>
-<listitem><para><filename
-class="directory">$<envar>HOME</envar>/.trinity</filename></para></listitem>
-<listitem><para><filename
-class="directory">/opt/trinity</filename>. (This location is a
-typical default. Some distributions might use
-<filename class="directory">/usr</filename> or <filename
-class="directory">/usr/trinity</filename>)</para></listitem>
-<listitem><para><filename
-class="directory">/etc/trinity</filename>.</para></listitem>
-</itemizedlist>
-
-<para>If you have the KIOSK Admin tool installed you can
-check which directory trees are used with the following command:
-<userinput><command>kiosktool-tdedirs</command>
-<option>--check</option></userinput></para>
-</informalexample>
-
-<para>&tde; and &tde; applications look up files by scanning all the
-&tde; directory trees. The directory trees are checked in order of
-precedence. When a file is present in multiple directory trees, the
-file from the last tree takes precedence. Normally, the tree
-located in the user's home directory has the highest precedence. This
-is also the directory tree to which changes are written.</para>
-
-<informalexample>
-<para>For information about the <literal>text/plain</literal> &MIME; type
-the following files are searched:</para>
-
-<itemizedlist>
-<listitem><para><filename
-class="directory">$<envar>HOME</envar>/.trinity/share/mimelnk/text/plain.desktop</filename></para></listitem>
-<listitem><para><filename
-class="directory">/opt/trinity/share/mimelnk/text/plain.desktop</filename></para></listitem>
-<listitem><para><filename
-class="directory">/etc/trinity/share/mimelnk/text/plain.desktop</filename></para></listitem>
-</itemizedlist>
-
-<para>If a user makes a change, the change is written to <filename
-class="directory">$<envar>HOME</envar>/.trinity/share/mimelnk/text/plain.desktop</filename></para>
-</informalexample>
-
-<para>For configuration files the story is slightly different. If
-there are multiple configuration files found in the directory trees
-with the same name, their content is combined. The precedence order of
-the directory trees plays a role here. When two files define the same
-configuration key, the file with the highest precedence determines
-which value is used for the key.</para>
-
-<informalexample><para>
-For example, if the following two files exist, with these contents:</para>
-<variablelist>
-<varlistentry><term><filename>$<envar>HOME</envar>/.trinity/share/config/foobar</filename></term>
-<listitem><programlisting>
-Color=red
-Shape=circle
-</programlisting>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename>/etc/trinity/share/config/foobar</filename></term>
-<listitem><programlisting>
-Color=blue
-Position=10,10
-</programlisting>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<para>The files will be merged to result in:</para>
-
-<programlisting>
-Color=red
-Shape=circle
-Position=10,10
-</programlisting>
-
-</informalexample>
-</sect1>
-
-<sect1 id="specifying-directories">
-<title>Specifying Directories</title>
-
-<para>
-
-<segmentedlist>
-<segtitle>Environment Variable</segtitle>
-<segtitle>Example Setting(s)</segtitle>
-<segtitle>Comment</segtitle>
-
-<seglistitem>
-<seg><envar>TDEHOME</envar></seg>
-<seg><filename class="directory">~/.trinity</filename></seg>
-<seg></seg>
-</seglistitem>
-
-<seglistitem>
-<seg><envar>TDEROOTHOME</envar></seg>
-<seg><filename class="directory">/root/.trinity</filename></seg>
-<seg>Different variable to prevent
-root writing to $TDEHOME of the user after running
-<command>su</command>.</seg>
-</seglistitem>
-
-<seglistitem>
-<seg><envar>TDEDIR</envar></seg>
-<seg><filename class="directory">/opt/trinity</filename>, <filename
-class="directory">/usr</filename>, <filename
-class="directory">/usr/trinity</filename></seg>
-<seg>Vendor dependent. If not set, falls back to
-compiled-in default.</seg>
-</seglistitem>
-
-<seglistitem>
-<seg><envar>TDEDIRS</envar></seg>
-<seg><filename class="directory">/opt/trinity</filename>, <filename
-class="directory">/usr</filename>, <filename
-class="directory">/usr/trinity</filename></seg>
-<seg>Can list multiple locations separated by a
-colon. If not set, falls back to $<envar>TDEDIR</envar></seg>
-</seglistitem>
-
-</segmentedlist>
-</para>
-<para>Don't <emphasis>need</emphasis> to be set, defaults work just fine.</para>
-
-<informalexample>
-<para>A staff member at a university could have the following
-settings:</para>
-<programlisting>
-TDEHOME='~/.trinity'
-TDEROOTHOME='/root/.trinity'
-TDEDIRS='/opt/tde_staff:/opt/trinity'
-</programlisting>
-
-</informalexample>
-
-</sect1>
-
-<sect1 id="user-profiles">
-<title>User Profiles</title>
-
-<para>In the previous example <filename
-class="directory">/opt/tde_staff</filename> contained additional settings
-and applications for staff members. <quote>User Profiles</quote> allow you
-to add this directory only for certain users and not for others. Add the
-following to <filename>/etc/tderc</filename>:</para>
-
-<programlisting>
-[Directories-staff]
-prefixes=/opt/tde_staff
-</programlisting>
-
-<para>This creates a profile named <quote>staff</quote> that adds the
-<filename class="directory">/opt/tde_staff</filename> directory
-tree. Now that we have a named profile it
-can be assigned to users.</para>
-
-<para>To map profiles to users a mapping file needs to be specified in
-<filename>/etc/tderc</filename>:</para>
-
-<programlisting>
-[Directories]
-userProfileMapFile=/etc/tde-user-profile
-</programlisting>
-
-<para>It is now possible to assign a profile based on either the user name
-or based on the &UNIX; group the user is part of.</para>
-
-<para>To assign the staff profile to all users that are a member of the
-&UNIX; group staff_members add the following to
-<filename>/etc/tde-user-profile</filename>:</para>
-
-<programlisting>
-[General]
-groups=staff_members
-[Groups]
-staff_members=staff
-</programlisting>
-
-<para>It is also possible to assign a profile to a single user:</para>
-
-<programlisting>
-[Users]
-bastian=staff
-</programlisting>
-
-</sect1>
-
-<sect1 id="directory-layout-revisited">
-<title>Directory Layout Revisited</title>
-
-<para>Each directory tree used by &tde; has a fixed directory structure.
-Directories that are not relevant for a certain tree, or simply not used can
-be left out though. For example, directories used for temporary files are
-usually only found under <filename
-class="directory">$<envar>TDEHOME</envar></filename> but not in any other
-directory tree.</para>
-
-</sect1>
-
-<sect1 id="architecture-specific-directories">
-<title>Architecture-specific Directories</title>
-
-<para>Architecture (OS and CPU type) specific directories:</para>
-
-<variablelist>
-<varlistentry>
-<term><filename class="directory">bin</filename></term>
-<listitem><para>Used for &tde; executables.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">lib</filename></term>
-<listitem><para>Used for &tde; libraries.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">lib/trinity</filename></term>
-<listitem><para>This directory contains components, plugins, and other
-runtime loadable objects for use by &tde; applications.</para></listitem>
-</varlistentry>
-</variablelist>
-
-</sect1>
-
-<sect1 id="shared-directories">
-<title>Shared Directories</title>
-
-<para>Shared: Not architecture specific, can be shared between different
-archs.</para>
-
-<variablelist>
-<varlistentry>
-<term><filename class="directory">share/applnk</filename></term>
-<listitem><para><literal role="extension">.desktop</literal> files for
-&tde;-menu (legacy)</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/applications</filename></term>
-<listitem><para><literal role="extension">.desktop</literal> files for
-&tde;-menu</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/apps</filename></term>
-<listitem><para>Contains application-specific data files. Each
-application has a sub-directory here for storing additional data
-files.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/config</filename></term>
-<listitem><para>Configuration files. Configuration files are normally
-named after the application they belong to plus the letters
-<quote>rc</quote>. A special case is <filename>kdeglobals</filename>.
-This file is read by all &tde; applications.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename
-class="directory">share/config/session</filename></term>
-<listitem><para>This directory is used by session management and is
-normally only available under <filename
-class="directory">$<envar>TDEHOME</envar></filename>. At the end of a
-session &tde; applications store their state here. The file names
-consist of the name of the application followed by a number. The
-session manager <command>ksmserver</command> stores references to
-these numbers when saving a session in
-<filename>ksmserverrc</filename>.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/doc/tde/HTML</filename></term>
-<listitem><para>This directory contains documentation for &tde;
-applications. Documentation is categorized by language and the
-application it belongs to. Normally at least two files can be found in
-a directory: <filename>index.docbook</filename>, which contains the
-documentation in the unformatted DocBook format, and
-<filename>index.cache.bz2</filename>, which contains the same
-documentation formatted as <command>bzip2</command>-compressed
-&HTML;. The &HTML; version is used by &khelpcenter;. If the &HTML;
-version is missing, &khelpcenter; will regenerate it from the DocBook
-version but this is a time-consuming process.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/icons</filename></term>
-<listitem><para>Under this directory icons are stored. Icons are
-categorized by theme, dimension and usage category.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/mimelnk</filename></term>
-<listitem><para>In this directory,<literal
-role="extension">.desktop</literal> files that describe &MIME; types
-are stored. &tde; uses &MIME; types to identify the type of a
-file.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/services</filename></term>
-<listitem><para>This directory contains <literal
-role="extension">.desktop</literal> files that describe services. Services
-are like applications but are usually launched by other applications instead
-of the user. Services do not appear in the &tde; menu.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/servicetypes</filename></term>
-<listitem><para>This directory contains <literal
-role="extension">.desktop</literal> files that describe
-servicetypes. A servicetype usually represents a certain programming
-interface. Applications and Services include in their <literal
-role="extension">>.desktop</literal> files the servicetypes that they
-provide.</para> </listitem></varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/sounds</filename></term>
-<listitem><para>This directory contains sound files.</para></listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/templates</filename></term>
-<listitem><para>This directory contains templates for creating files
-of various types. A template consists of a <literal
-role="extension">.desktop</literal> file that describes the file and
-that includes a reference to a file in the <filename
-class="directory">.source</filename> sub-directory. The templates in
-this directory appear in the <guimenu>Create New</guimenu> menu
-available on the desktop and in the file browser. When a user selects
-a template from the menu its source file is copied.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename class="directory">share/wallpapers</filename></term>
-<listitem><para>This directory contains images that can be used as
-background picture</para></listitem>
-</varlistentry>
-
-</variablelist>
-
-</sect1>
-
-<sect1 id="host-specific-directories">
-<title>Host-specific Directories</title>
-
-<para>There are three host-specific directories that are usually
-symlinked to other locations. If the directories do not already exist,
-the following symlinks and directories will be created using the
-<command>lnusertemp</command> utility:</para>
-
-<variablelist>
-
-<varlistentry>
-<term><filename>$<envar>TDEHOME</envar>/socket-$<envar>HOSTNAME</envar></filename></term>
-<listitem><para>Usually <filename
-class="directory">/tmp/tdesocket-$<envar>USER</envar>/</filename>, this
-is used for various &UNIX; sockets.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename>$<envar>TDEHOME</envar>/tmp-$<envar>HOSTNAME</envar></filename></term>
-<listitem><para>Usually	<filename
-class="directory">/tmp/tde-$<envar>USER</envar>/</filename>, this is used for temporary files.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename>$<envar>TDEHOME</envar>/cache-$<envar>HOSTNAME</envar></filename></term>
-<listitem><para>Usually <filename
-class="directory">/var/tmp/tdecache-$<envar>USER</envar>/</filename>,
-this is used for cached files.</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<para>Since both <filename class="directory">/tmp</filename> and
-<filename class="directory">/var/tmp</filename> are world writable,
-there is a possibility that one of the above directories already
-exists but is owned by another user. In that case the
-<command>lnusertemp</command> utility will create a new directory with
-an alternative name and link to that instead.</para>
-
-</sect1>
-
-<sect1 id="configuration-files">
-<title>Configuration Files</title> <para>&tde; uses a simple
-text-based file format for all its configuration files. It consists of
-key-value pairs that are placed in groups. All &tde; configuration
-files use <acronym>UTF</acronym>-8 encoding for text outside the
-<acronym>ASCII</acronym> range.</para>
-
-<para>The start of a group is indicated by a group name that is placed
-in square brackets. All the key-value entries that follow belong to
-the group. The group ends when either another group starts or when the
-end of the file is reached. Entries at the top of the
-file that are not preceded by a group name belong to the default
-group.</para>
-
-<informalexample><para>The following example shows a configuration
-file that consists of two groups. The first group contains the keys
-<varname>LargeCursor</varname> and <varname>SingleClick</varname>, the
-second group contains the keys <varname>Show hidden files</varname>
-and <varname>Sort by</varname>:</para>
-
-<programlisting>
-[TDE]
-LargeCursor=false
-SingleClick=true
-</programlisting>
-
-<programlisting>
-[KFileDialog Settings]
-Show hidden files=false
-Sort by=Name
-</programlisting>
-</informalexample>
-
-<para>Entries in a group consist of a key and value separated by an equals
-sign. The key can contain spaces and may be followed by options placed in
-square brackets. The part after the equals sign is the value of the
-entry. Any white space surrounding the equals sign is ignored, as is any
-trailing white space. Put more concisely, the format is:</para>
-
-<programlisting>
-<replaceable>entry</replaceable>=<replaceable>value</replaceable>
-</programlisting>
-
-<para>If a value is supposed to include a space at the begin or end
-then this can be achieved by using a backslash followed by an
-<quote>s</quote>.</para>
-
-<para>There are several other backslash codes; here is a complete
-list:
-<itemizedlist>
-<listitem><para><token>\s</token> can be used as space</para>
-</listitem>
-<listitem><para><token>\t</token> can be used to include a tab</para>
-</listitem>
-<listitem><para><token>\r</token> for a carriage return character</para>
-</listitem>
-<listitem><para><token>\n</token> for a linefeed character (new line)</para>
-</listitem>
-<listitem><para><token>\\</token> to include the backslash itself</para>
-</listitem>
-</itemizedlist></para>
-
-<informalexample><para>In the following example the value of the
-<varname>Caption</varname> entry starts with two spaces while the
-<varname>Description</varname> entry contains three lines of
-text. Linefeeds in backslash notation are used to separate the
-different lines.</para>
-
-<programlisting>
-[Preview Image]
-Caption=\s My Caption
-Description=This is\na very long\ndescription.
-</programlisting>
-</informalexample>
-
-<para>Empty lines in configuration files are ignored, as are lines that
-start with a hash mark (<quote>#</quote>). The hash mark can be used to add
-comments to configuration files. It should be noted that when a &tde;
-application updates a configuration file the comments are
-<emphasis>not</emphasis> preserved.</para>
-
-<para>There can be multiple configuration files with the same name in the
-<filename class="directory">share/config</filename> sub-directory of the
-various &tde; directory trees. In this case the information of all these
-configuration files is combined on a key-by-key basis. If the same key
-within a certain group is defined in more than one place, the key value read
-from the directory tree with the highest precedence will be used.
-Configuration files under <filename
-class="directory">$<envar>TDEHOME</envar></filename> always have the highest
-precedence. If a key in a certain group is defined multiple times in a
-single file, the value of the last entry is used.</para>
-
-<informalexample>
-<para>If <filename>$<envar>HOME</envar>/.trinity/share/config/foobar</filename>
-contains:
-<programlisting>
-[MyGroup]
-Color=red
-Shape=circle
-</programlisting>
-and <filename>/etc/trinity/share/config/foobar</filename> contains
-<programlisting>
-[MyGroup]
-Color=blue
-Position=10,10
-</programlisting>
-the result will be:
-<programlisting>
-[MyGroup]
-Color=red
-Shape=circle
-Position=10,10
-</programlisting>
-</para>
-</informalexample>
-
-<informalexample>
-<para>If
-	<filename>$<envar>HOME</envar>/.trinity/share/config/foobar</filename>
-	contains
-<programlisting>
-[MyGroup]
-Color=red
-Shape=circle
-[MyGroup]
-Color=green
-</programlisting>
-and <filename>/opt/tde_staff/share/config/foobar</filename> contains
-<programlisting>
-[MyGroup]
-Color=purple
-Position=20,20
-</programlisting>
-and <filename>/etc/trinity/share/config/foobar</filename> contains
-<programlisting>
-[MyGroup]
-Color=blue
-Position=10,10
-</programlisting>
-the result will be:
-<programlisting>
-[MyGroup]
-Color=green
-Shape=circle
-Position=20,20
-</programlisting>
-</para>
-</informalexample>
-
-<para>To prevent users being able to override default settings,
-settings can be marked <emphasis>immutable</emphasis>. Settings can be made immutable
-individually, per group or per file. An individual entry can be locked
-down by adding <userinput>[$i]</userinput> behind the key, &eg;:
-<programlisting>
-Color[$i]=blue
-</programlisting>
-</para>
-<para>A group of entries can be locked down by placing
-<userinput>[$i]</userinput> behind the group name, &eg;:
-<programlisting>
-[MyGroup][$i]
-</programlisting>
-</para>
-<para>To lock down the entire file, start the file with
-<userinput>[$i]</userinput> on a single line, &ie;:
-<programlisting>
-[$i]
-</programlisting>
-</para>
-
-<informalexample>
-<para>If
-	<filename>$<envar>HOME</envar>/.trinity/share/config/foobar</filename>
-	contains:
-<programlisting>
-[MyGroup]
-Color=red
-Shape=circle
-</programlisting>
-and <filename>/etc/trinity/share/config/foobar</filename> contains:
-<programlisting>
-[MyGroup][$i]
-Color=blue
-Position=10,10
-</programlisting>
-the result will be:
-<programlisting>
-[MyGroup]
-Color=blue
-Position=10,10
-</programlisting>
-</para>
-</informalexample>
-
-<informalexample><para>If
-	<filename>$<envar>HOME</envar>/.trinity/share/config/foobar</filename>
-	contains:
-<programlisting>
-[MyGroup]
-Color=red
-Shape=circle
-</programlisting>
-and <filename>/opt/tde_staff/share/config/foobar</filename> contains
-<programlisting>
-[MyGroup]
-Color=purple
-Shape=rectangle
-</programlisting>
-and <filename>/etc/trinity/share/config/foobar</filename> contains
-<programlisting>
-[MyGroup][$i]
-Color=blue
-Position=10,10
-</programlisting>
-the result will be
-<programlisting>
-[MyGroup]
-Color=purple
-Shape=rectangle
-Position=10,10
-</programlisting>
-</para>
-</informalexample>
-
-
-<para>So-called <quote>Shell Expansion</quote> can be used to provide more
-dynamic default values. With shell expansion the value of a configuration
-key can be constructed from the value of an environment variable or from the
-output of a shell command. To enable shell expansion for a configuration
-entry, the key must be followed by <token>[$e]</token>. Normally the
-expanded form is written into the user's configuration file after first use.
-To prevent that, it is recommend to lock the configuration entry down by
-using <token>[$ie]</token>. The user can't change it then of course.</para>
-
-<informalexample>
-<para>In the following example the value for the <varname>Host</varname>
-entry is determined by the output of the <command>hostname</command>
-program. This setting is also locked down to ensure that the value is always
-determined dynamically.</para>
-
-<para>The value for the <varname>Email</varname> entry is determined by
-filling in the values of the $<envar>USER</envar> and $<envar>HOST</envar>
-environment variables. When <systemitem class="username">joe</systemitem> is
-logged in on <systemitem class="systemname">joes_host</systemitem> this will
-result in a value equal to <literal>joe@joes_host</literal>. The setting is
-not locked down.</para>
-
-<programlisting>
-[Mail Settings]
-Host[$ie]=$(hostname)
-Email[$e]=${USER}@${HOST}
-</programlisting>
-</informalexample>
-
-<para>Most configuration entries can be indexed with a language code. In
-this case, the language that the user has selected for use on the desktop is
-used to look up the key value. If the default language (American English)
-has been selected or if there is no index that corresponds to the selected
-language, the key entry without index is used.</para>
-
-<informalexample>
-<para>In the following example the value of the <varname>Caption</varname>
-entry depends on the language. If the user has selected French as language
-(language code <literal>fr</literal>) the value of the entry will be
-<quote>Ma L&eacute;gende</quote>. In all other cases the value <quote>My
-Caption</quote> will be used.</para>
-
-<programlisting>
-[Preview Image]
-Caption=My Caption
-Caption[fr]=Ma L&eacute;gende
-</programlisting>
-</informalexample>
-
-<informalexample>
-<para>In this example the value of the <varname>Caption</varname> entry
-depends on the language. If the user has selected French as language
-(language code <literal>fr</literal>) the value of the entry will be
-<quote>Ma L&eacute;gende.</quote> In all other cases the value <quote>My
-Caption</quote> will be used.</para>
-
-<programlisting>
-[Preview Image]
-Caption=My Caption
-Caption[fr]=Ma L&eacute;gende
-</programlisting>
-</informalexample>
-
-<para>In general the entries that can appear in a configuration file are not
-documented. In <filename class="directory">$<envar>TDEDIR</envar>/share/config.kcfg</filename>, files
-can be found that provide a formal description of the possible entries in a
-configuration file. These are used by the new &tde; Configuration Editor
-when available.</para>
-
-<informalexample>
-<para>Here is an example &XML; configuration file:
-<programlisting>
-<markup>
-&lt;?xml version="1.0" encoding="UTF-8"?&gt;
-&lt;!DOCTYPE kcfg SYSTEM "http://www.kde.org/standards/kcfg/1.0/kcfg.dtd"&gt;
-&lt;kcfg&gt;
-    &lt;kcfgfile name="korganizerrc"/&gt;
-    &lt;group name="General"&gt;
-         &lt;entry type="Bool" key="Auto Save"&gt;
-             &lt;label&gt;Enable automatic saving of calendar&lt;/label&gt;
-             &lt;default&gt;true&lt;/default&gt;
-         &lt;/entry&gt;
-         &lt;entry type="Int" key="Auto Save Interval"&gt;
-             &lt;default&gt;10&lt;/default&gt;
-         &lt;/entry&gt;
-    &lt;/group&gt;
-&lt;/kcfg&gt;
-</markup>
-</programlisting>
-</para>
-<para>It has the same effect as:
-<programlisting>
-[General]
-Auto Save=false
-Auto Save Interval=25
-</programlisting>
-</para>
-</informalexample>
-
-</sect1>
-
-<sect1 id="tde-startup-sequence">
-<title>&tde; Startup Sequence</title>
-
-<sect2 id="tdm">
-<title>&tdm;</title>
-
-<para>&tdm; always runs as <systemitem class="username">root</systemitem>. &tdm; uses
-<filename>$<envar>TDEDIR</envar>/share/config/tdmrc</filename> and
-<filename>/etc/X11/xdm/Xservers</filename>. The latter contains entries
-like:</para>
-
-<programlisting>
-:0 local /usr/X11R6/bin/X :0 vt07
-</programlisting>
-
-<para>Relevant startup files are also: </para>
-<simplelist>
-<member>
-[X-*-Core] section in <filename>tdmrc</filename>
-</member>
-<member>
-Setup - <filename>/etc/X11/xdm/Xsetup</filename>
-</member>
-<member>
-User enters username &amp; password
-</member>
-<member>
-Startup - <filename>/etc/X11/xdm/Xstartup</filename> - prepare as root
-</member>
-<member>
-Session - <filename>/etc/X11/xdm/Xsession</filename> - starts session as user
-</member>
-<member>
-= For a TDE session: <command>tde</command> or <command>starttde</command>
-</member>
-<member>
-= If present <filename>~/.xsession</filename> or <filename>~/.xinitrc</filename>
-</member>
-<member>
-Reset - <filename>/etc/X11/xdm/Xreset</filename> - after session finished
-</member>
-</simplelist>
-
-</sect2>
-
-<sect2 id="starttde">
-<title>The &tde; Startup Script: <command>starttde</command></title>
-
-<para>The &tde; startup sequence starts with the
-<filename>starttde</filename> script. In most cases this script gets called
-from the display manager (&tdm;) once the user has been authenticated. Their
-are two important lines in the <filename>starttde</filename>
-script:</para>
-
-<programlisting>
-LD_BIND_NOW=true $TDEDIR/bin/start_tdeinit_wrapper --new-startup +kcminit_startup
-$TDEDIR/bin/tdeinit_phase1
-</programlisting>
-
-<para>The first line starts the <command>tdeinit</command> master process.
-The <command>tdeinit</command> master process is used to start all other
-&tde; processes. It shows up in the output of <command>ps
-<option>aux</option></command> as <computeroutput>tdeinit:
-Running...</computeroutput>. The arguments after <command>tdeinit</command>
-are the names of additional processes to be started. The <token>+</token>
-indicates that <command>tdeinit</command> needs to wait till the process has
-finished. <command>tdeinit</command> also starts
-<command>dcopserver</command>, <command>tdelauncher</command> and
-<command>kded</command>.</para>
-
-<para>The second of the two lines asks <command>tdeinit</command> to start
-the <command>ksmserver</command> session manager process. The session
-manager determines the lifetime of the session. When this process exits, the
-user is logged out.</para>
-
-</sect2>
-</sect1>
-
-<sect1 id="background-processes">
-<title>Background Processes</title>
-
-<para>All &tde; background services are user-specific: unlike system daemons
-they are not shared between users. As well as being unique per user they are
-also unique per X-server display. The processes are:</para>
-
-<variablelist>
-<varlistentry>
-<term><command>dcopserver</command></term>
-<listitem><para>Desktop communication</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>kded</command></term>
-<listitem><para>Generic service daemon.</para>
-<para>Triggers <link linkend="tdesycoca">Sycoca</link> database updates when
-needed</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>kcminit</command></term>
-<listitem><para>Initialization service</para>
-<para>See <xref linkend="kcminit"/> for more information.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>tdelauncher</command></term>
-<listitem><para>Program launch (this is <emphasis>not</emphasis> the
-<keycombo action="simul">&Alt;<keycap>F2</keycap>
-</keycombo>dialog!)</para>
-<para>See <xref linkend="tdelauncher"/> for more information.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>knotify</command></term>
-<listitem><para>User notifications.</para>
-<para>See <xref linkend="knotify"/> for more information.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>ksmserver</command></term>
-<listitem><para>Session management</para>
-<para>See <xref linkend="ksmserver"/> for more information.</para>
-</listitem>
-</varlistentry>
-
-</variablelist>
-
-<sect2 id="tdeinit">
-<title><command>tdeinit</command></title>
-<para><command>tdeinit</command> is used to start all other &tde;
-programs. <command>tdeinit</command> can start normal binary program files
-as well as <command>tdeinit</command> loadable modules. Loadable modules
-work just like binary program files but can be started more efficiently.
-Loadable modules live in <filename
-class="directory">$<envar>TDEDIR</envar>/lib/trinity</filename></para>
-
-<para>The drawback is that programs started this way appear as
-<computeroutput><command>tdeinit</command></computeroutput> in the output of
-<command>top</command> and <command>ps</command>. Use <command>top
-<option>-c</option></command> or <command>ps <option>aux</option></command>
-to see the actual program name:</para>
-
-<screen>
-<prompt>%</prompt><userinput><command>ps <option>aux</option></command></userinput>
-<computeroutput>
-waba     23184  0.2  2.1 23428 11124 ?	S    21:41   0:00 tdeinit: Running...
-waba     23187  0.1  2.1 23200 11124 ?	S    21:41   0:00 tdeinit: dcopserver --nosid
-waba     23189  0.2  2.4 25136 12496 ?	S    21:41   0:00 tdeinit: tdelauncher
-waba     23192  0.7  2.8 25596 14772 ?	S    21:41   0:00 tdeinit: kded
-waba     23203  0.8  3.4 31516 17892 ?	S    21:41   0:00 tdeinit:
-knotify
-</computeroutput>
-</screen>
-
-<para><computeroutput>tdeinit: Running...</computeroutput> indicates the
-master <command>tdeinit</command> process. The other processes listed are
-programs started as loadable modules.</para>
-
-<para>When <command>tdeinit</command> starts for the first time it will
-launch <command>dcopserver</command>, <command>tdelauncher</command>, and
-<command>kded</command>, as well as any additional programs specified on its
-command line in the <command>starttde</command> script, normally
-<command>kcminit</command> and <command>knotify</command>.</para>
-
-</sect2>
-
-<sect2 id="dcopserver">
-<title><command>dcopserver</command></title>
-
-<para><command>dcopserver</command> is a daemon which provides inter-process
-communication (&DCOP;) facilities to all &tde; applications. The &DCOP;
-facilities are accessible from the command shell via the
-<command>dcop</command> command line tool. &DCOP; is essential for all &tde;
-applications.</para>
-
-<para>Some related files:</para>
-
-<variablelist>
-<varlistentry>
-<term><filename>$<envar>HOME</envar>/.DCOPserver_$<envar>HOSTNAME</envar>_$<envar>DISPLAY</envar></filename></term>
-<listitem><para>&eg; <filename>.DCOPserver_linux__0</filename>.	Controlled by $<envar>DCOPAUTHORITY</envar></para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename>/tmp/.ICE-unix/dcop<replaceable>pid</replaceable>-<replaceable>number</replaceable></filename></term>
-<listitem><para>&eg; <filename>dcop7634-1069677856</filename>. This is
-the file that the <filename>DCOPserver</filename> file above points to.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><filename>$<envar>HOME</envar>/.ICEauthority</filename></term>
-<listitem><para>Authorization information controlled by
-$<envar>ICEAUTHORITY</envar></para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-</sect2>
-
-<sect2 id="kcminit">
-<title>kcminit</title>
-
-<para><command>kcminit</command> executes initialization services during
-startup. Initialization services are specified in the .desktop files of
-applications or services via the <varname>X-TDE-Init</varname> line:</para>
-
-<programlisting>
-[Desktop Entry]
-Encoding=UTF-8
-Exec=tdecmshell energy
-Icon=energy_star
-Type=Application
-X-TDE-Library=energy
-X-TDE-Init=energy
-</programlisting>
-
-<para>Initialization services are typically used for initializing
-hardware based on user-specified settings.</para>
-
-<para><userinput><command>kcminit
-<option>--list</option></command></userinput> can be used to show all
-initialization services and <userinput><command>kcminit
-<replaceable>service</replaceable></command></userinput> can be used to
-execute a single service explicitly. This can be useful when investigating
-startup problems.</para>
-
-</sect2>
-
-<sect2 id="tdelauncher">
-<title><command>tdelauncher</command></title>
-
-<para><command>tdelauncher</command> is a daemon which is responsible for
-service activation within &tde;. It operates in close connection with the
-<command>tdeinit</command> master process to start new processes. &tde;
-applications communicate with <command>tdelauncher</command> over &DCOP; in
-order to start new applications or services.</para>
-
-<para>Best known from the error message: <computeroutput><errortext>
-TDELauncher could not be reached via DCOP </errortext></computeroutput> which
-either indicates a serious problem with the <command>dcopserver</command> or
-that <command>tdelauncher</command> crashed.</para>
-
-<para><command>tdelauncher</command> can be restarted by restarting
-<command>tdeinit</command> from a console window. Make sure that
-$<envar>HOME</envar>, $<envar>DISPLAY</envar> and the various
-$<envar>TDEDIR(S)</envar> are set correctly when doing so!</para>
-
-</sect2>
-
-<sect2 id="knotify">
-<title><command>knotify</command></title>
-
-<para>The primary task of <command>knotify</command> is to relay sound
-notifications to the sound server, it also provides alternative notification
-methods.</para>
-
-</sect2>
-
-
-</sect1>
-
-<sect1 id="ksmserver">
-<title>KSMServer</title>
-
-<para><command>ksmserver</command> is &tde;'s session manager. On startup
-the session manager launches auto-start applications and restores
-applications from the previous session. The applications to auto-start are
-indicated by <literal role="extension">.desktop</literal> files in the
-<filename
-class="directory">$<envar>TDEDIR</envar>/share/autostart</filename>
-directory. Whether or not to auto-start an application can be made
-conditional upon some configuration entry determined by the
-<varname>X-TDE-autostart-condition</varname> entry in the <literal
-role="extension">.desktop</literal> file.</para>
-
-<informalexample>
-<para>The <filename>ktip.desktop</filename> file for example
-contains:</para>
-
-<programlisting>
-X-TDE-autostart-condition=ktiprc:TipOfDay:RunOnStart:true
-</programlisting>
-
-<para>This means that the <filename>ktiprc</filename> configuration
-file is checked for a <varname>RunOnStart</varname> entry in the
-<varname>[TipOfDay]</varname> section. If no such entry is found,
-<literal>true</literal> is assumed, which means that
-<application>ktip</application> is one of the applications that is
-auto-started by default.</para>
-</informalexample>
-
-<para>Some of the applications auto-started by <command>ksmserver</command>
-are:</para>
-
-<variablelist>
-
-<varlistentry>
-<term><command>kdesktop</command></term>
-<listitem><para>The &tde; desktop</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>&kicker;</command></term>
-<listitem><para>The &tde; panel</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>ktip</command></term>
-<listitem><para>A tip of the day program</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>kwrited</command></term>
-<listitem><para>A utility to receive system messages sent to the user</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>&klipper;</command></term>
-<listitem><para>A clipboard utility that docks in the panel</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><command>kalarm</command></term>
-<listitem><para>A utility that warns about upcoming events and appointments</para>
-</listitem>
-
-</varlistentry>
-</variablelist>
-
-<para><command>kdesktop</command> in its turn automatically starts
-applications stored in <filename
-class="directory">$<envar>TDEHOME</envar>/Autostart</filename>. <command>kdesktop</command>
-will automatically open any files stored in this directory including
-documents, binary files or applications in the form of <literal
-role="extension">.desktop</literal> files.</para>
-
-<para>The &tde; session manager also restores one of the previous
-sessions. A session contains a collection of applications as well as
-application-specific information that reflects the state of the applications
-at the time the session was saved. Sessions are stored in the
-<filename>ksmserverrc</filename> configuration file which contains
-references to application-specific state information. The
-application-specific state information is saved in <filename
-class="directory">$<envar>TDEHOME</envar>/share/config/session</filename>.
-The state information of &twin; contains the location of the application
-windows of all the other applications in the session.
-</para>
-
-</sect1>
-
-<sect1 id="environment-variables">
-<title>Environment variables</title>
-
-<para>Some important environment variables used by &tde;:</para>
-
-<variablelist>
-
-<varlistentry>
-<term>$<envar>TDEDIR</envar></term>
-<listitem><para>Has to be set if
-<envar>TDEDIRS</envar> is not set and has to point to the root of the
-&tde; installation tree. Allows &tde; to find its data like icons,
-menus and libraries.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDEDIRS</envar></term>
-<listitem><para>Overrides <envar>TDEDIR</envar> and allows you to specify
-multiple directories where &tde; searches for its data. Useful if you want
-or have to install some programs to a different prefix than the rest of
-&tde;.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term><envar>$TDEHOME</envar></term><listitem><para>If
-not set, &tde; uses <filename class="directory">~/.trinity</filename> as
-the directory where personal data is stored.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDEROOTHOME</envar></term><listitem><para>If
-not set, &tde; uses <filename class="directory">~root/.trinity</filename>
-as the directory for <systemitem class="username">root</systemitem>'s
-personal data. Was introduced to prevent &tde; from accidently
-overwriting user data with root permissions when the user runs a &tde;
-program after switching with <command>su</command> to <systemitem
-class="username">root</systemitem>.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDEWM</envar></term><listitem><para>If the
-<envar>TDEWM</envar> environment variable has been set, then it will
-be used as &tde;'s window manager within the
-<command>starttde</command> script instead of &twin;.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_LANG</envar></term><listitem><para>Overrides
-the &tde; language configuration, &eg; <userinput>TDE_LANG=fr kprogram
-&amp;</userinput> starts a program with French translation if the
-necessary files are installed.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_MULTIHEAD</envar></term><listitem><para>Set
-this variable to <literal>true</literal> to indicate that &tde; is running
-on a multi-head system.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_FORK_SLAVES</envar></term>
-<listitem><para>Set this variable to spawn
-<acronym>TDEIO</acronym>-slaves directly from the application process
-itself. By default <acronym>TDEIO</acronym>-slaves are spawned using
-<command>tdelauncher</command>/<command>tdeinit</command>. This option is
-useful if the <acronym>TDEIO</acronym>-slave should run in the same
-environment as the application. This can be the case with
-<application>Clearcase</application>.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_HOME_READONLY</envar></term>
-<listitem><para>Set this variable to indicate that your home directory is
-mounted as read-only.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_NO_IPV6</envar></term><listitem><para>
-Set this variable to disable <acronym>IPv6</acronym>
-support and <acronym>IPv6</acronym> <acronym>DNS</acronym>
-lookups.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_IS_PRELINKED</envar></term><listitem><para>
-Set this variable to indicate that you have prelinked
-your &tde; binaries and libraries. This will turn off
-<command>tdeinit</command>.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_UTF8_FILENAMES</envar></term><listitem><para>If
-this environment variable is set, &tde; assumes all filenames are in
-<acronym>UTF-8</acronym> encoding regardless of the current C
-locale.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDE_FULL_SESSION</envar></term><listitem><para>
-Automatically set to true by &tde; startup, it is used
-by &eg; &konqueror; to know if it should consider remaining in memory
-for future re-use when being closed. If not set, &konqueror; will exit
-after being closed (&eg; &tdesu; does that, it's also useful for
-debugging).</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDESYCOCA</envar></term><listitem><para>Allows
-you to specify the path and the name of the generated &tde; system
-configuration cache file.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDETMP</envar></term><listitem><para>Allows
-to specify another path than <filename
-class="directory">/tmp</filename> where &tde; stores its temporary
-files.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>TDEVARTMP</envar></term><listitem><para>Allows
-to specify another path than <filename
-class="directory">/var/tmp</filename> where &tde; stores its variable
-files.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>XDG_DATA_HOME</envar></term><listitem><para>
-Defines the base directory relative to which user-specific
-data files should be stored. Default is <filename
-class="directory">$<envar>HOME</envar>/.local/share</filename></para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>XDG_DATA_DIRS</envar></term><listitem><para>
-Defines the preference-ordered set of base directories to
-search for data files in addition to the <filename
-class="directory">$<envar>XDG_DATA_HOME</envar></filename> base
-directory. Default is
-<literal>/usr/local/share/:/usr/share/</literal></para>
-
-<para>&tde; adds locations from $<envar>TDEDIRS</envar> and profiles
-as well. Used for <literal role="extension">.desktop</literal> and
-<literal role="extension">.directory</literal> menu files. <literal
-role="extension">.desktop</literal> files under <filename
-class="directory">$<envar>XDG_DATA_DIRS</envar>/applications</filename>.
-<literal
-role="extension">.directory</literal> files under
-$XDG_DATA_DIRS/desktop-directories
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>XDG_CONFIG_HOME</envar></term><listitem><para>
- - Defines the base directory relative to which user
-specific configuration files should be stored. Default is
-<filename class="directory">$<envar>HOME</envar>/.config</filename>.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry><term>$<envar>XDG_CONFIG_DIRS</envar></term><listitem><para>
-- Defines the preference-ordered set of base directories
-to search for configuration files in addition to the $<envar>XDG_CONFIG_HOME</envar>
-base directory. The default is <filename class="directory">/etc/xdg</filename> &tde; adds locations from
-$<envar>TDEDIRS</envar> and profiles as well. Used by <literal role="extension">.menu</literal> descriptions in
-<filename class="directory">$<envar>XDG_CONFIG_DIRS</envar>/menus</filename>.
-</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-</sect1>
-
-<sect1 id="the-tdeinit-mystery">
-<title>The tdeinit Mystery</title>
-
-<!-- FIXME: Add more words. Fix markup -->
-
-<para><command>tdeinit</command> is used to start all other &tde;
-programs. <command>tdeinit</command> can start normal binary program f iles
-as well as <command>tdeinit</command> loadable modules. Loadable modules work just like binary
-program files but can be started more efficiently. Loadable modules
-live in <filename
-class="directory">$<envar>TDEDIR</envar>/lib/trinity</filename></para>
-
-<para>The drawback is that programs started this way appear as
-<computeroutput><command>tdeinit</command></computeroutput> in the
-output of <command>top</command> and <command>ps</command>. Use
-<command>top <option>-c</option></command> or <command>ps
-<option>aux</option></command> to see the actual program name:</para>
-
-<screen>
-<prompt>%</prompt> <userinput><command>ps aux | grep bastian</command></userinput>
-<computeroutput>
-bastian  26061  0.0  2.2 24284 11492 ?       S    21:27   0:00 tdeinit: Running...
-bastian  26064  0.0  2.2 24036 11524 ?       S    21:27   0:00 tdeinit: dcopserver
-bastian  26066  0.1  2.5 26056 12988 ?       S    21:27   0:00 tdeinit: tdelauncher
-bastian  26069  0.4  3.2 27356 16744 ?       S    21:27   0:00 tdeinit: kded
-bastian  26161  0.2  2.7 25344 14096 ?       S    21:27   0:00 tdeinit: ksmserver
-bastian  26179  1.1  3.4 29716 17812 ?       S    21:27   0:00 tdeinit: kicker
-bastian  26192  0.4  3.0 26776 15452 ?       S    21:27   0:00 tdeinit: klipper
-bastian  26195  1.0  3.5 29200 18368 ?       S    21:27   0:00 tdeinit: kdesktop
-</computeroutput>
-</screen>
-<para>As you might have noticed, this has another side effect, making it
-difficult to kill a process that is causing trouble:</para>
-
-<screen><prompt>%</prompt> <userinput><command>killall kdesktop</command></userinput>
-<computeroutput>kdesktop: no process killed</computeroutput></screen>
-
-<para>You might be tempted to try <userinput><command>killall
-tdeinit</command></userinput>, but killing all tdeinit processes will have
-the effect of shutting down all of &tde;. In effect, total
-destruction!</para>
-
-<para>There are two simple solutions to this:</para>
-
-<screen><prompt>%</prompt> <userinput><command>tdekillall kdesktop</command></userinput>
-or good old
-<prompt>%</prompt> <userinput><command>kill 26195</command></userinput></screen>
-<para><command>tdekillall</command> is part of the &tde; <acronym>SDK</acronym>
-package.</para>
-
-</sect1>
-
-</chapter>
-
-<chapter id="customizing-tde">
-<title>Customizing &tde;</title>
-
-
-<sect1 id="desktop-icons">
-<title>Desktop Icons</title>
-
-<para>&tde; uses several types of icons:</para>
-<itemizedlist>
-<listitem><para>Documents</para>
-</listitem>
-<listitem><para>Links to Websites (using <literal role="extension">.desktop</literal> file)</para>
-</listitem>
-<listitem><para>Links to Applications (using <literal role="extension">.desktop</literal> file)</para>
-</listitem>
-<listitem><para>Devices - Disks, Partitions &amp; Peripherals:
-<itemizedlist>
-<listitem><para>Explicit using <literal role="extension">.desktop</literal> file</para>
-</listitem>
-<listitem><para>Automatic via devices:// io-slave</para>
-</listitem>
-</itemizedlist>
-</para>
-</listitem>
-<listitem><para>Vendor-specific</para>
-</listitem>
-</itemizedlist>
-
-<sect2 id="desktop-icons-websites">
-<title>Websites</title>
-<para>
-Links to Websites using <literal role="extension">.desktop</literal>
-file: <menuchoice><guimenu>Create
-New</guimenu><guisubmenu>File</guisubmenu><guimenuitem>Link to
-Location (URL)</guimenuitem></menuchoice>. Change Icon using
-<guilabel>Properties</guilabel> dialogs. The resulting <literal
-role="extension">.desktop</literal> file:
-<programlisting>
-[Desktop Entry]
-Encoding=UTF-8
-Icon=/opt/trinity/share/apps/kdesktop/pics/ksslogo.png
-Type=Link
-URL=http://www.trinitydesktop.org/
-</programlisting>
-</para>
-</sect2>
-
-<sect2 id="desktop-icons-applications">
-<title>Applications</title>
-
-<para>Links to Applications using <literal
-role="extension">.desktop</literal> file: <menuchoice><guimenu>Create
-New</guimenu><guisubmenu>File</guisubmenu><guimenuitem>Link to
-Application</guimenuitem></menuchoice>. You must provide details
-yourself. Drag from &tde; Menu: Either copy or link (creates symlink),
-much easier</para>
-
-<!-- Perhaps legacy and translated should be the other way around, but -->
-<!-- this is how it appears in Waldo's presentation. Need to check -->
-<!-- this -->
-
-<programlisting>
-[Desktop Entry]<co id="boilerplate"/>
-Encoding=UTF-8
-GenericName=IRC Client<co id="generic-desc"/>
-GenericName[af]=Irc Kli&euml;t
-GenericName[de]=IRC Programm
-...
-GenericName[zu]=Umthengi we IRC<co id="legacy"/>
-SwallowExec=<co id="translated"/>
-Name=KSirc
-Name[af]=Ksirc
-Name[de]=KSirc
-...
-</programlisting>
-
-<calloutlist>
-<callout arearefs="boilerplate"><para>Boiler plate</para>
-</callout>
-<callout arearefs="generic-desc"><para>Translated generic description, not used on desktop</para>
-</callout>
-<callout arearefs="legacy"><para>Legacy, can be removed</para>
-</callout>
-<callout arearefs="translated"><para>Translated name as it appears on desktop</para>
-</callout>
-</calloutlist>
-
-<para>Desktop Icons</para>
-<programlisting>
-...
-Name[zu]=Ksirc
-MimeType=<co id="co-mimetype"/>
-Exec=ksirc %i %m<co id="co-exec"/>
-Icon=ksirc<co id="co-icon"/>
-TerminalOptions=<co id="co-terminaloptions"/>
-Path=<co id="co-path"/>
-Type=Application<co id="co-type"/>
-Terminal=0<co id="co-terminal"/>
-X-TDE-StartupNotify=true<co id="co-x-tde-startupnotify"/>
-X-DCOP-ServiceType=Multi<co id="co-x-dcop-servicetype"/>
-Categories=Qt;TDE;Network<co id="co-categories"/>
-</programlisting>
-
-<calloutlist>
-<callout arearefs="co-mimetype"><para>Supported &MIME; types, not used on
-desktop</para>
-</callout>
-<callout arearefs="co-exec"><para>The command line to execute</para>
-</callout>
-<callout arearefs="co-icon"><para>The icon, from icon theme or full path</para>
-</callout>
-<callout arearefs="co-terminaloptions"><para>Only used if terminal is
-needed</para>
-</callout>
-<callout arearefs="co-path"><para>Working directory for command</para>
-</callout>
-<callout arearefs="co-type"><para>More boiler plate</para>
-</callout>
-<callout arearefs="co-terminal"><para>Use true if terminal is needed,
-text application</para>
-</callout>
-<callout arearefs="co-x-tde-startupnotify"><para>Show bouncy cursor,
-disable if it doesn't work.</para>
-</callout>
-<callout arearefs="co-x-dcop-servicetype"><para>Has app started ok?
-Remove if it doesn't work</para>
-</callout>
-<callout arearefs="co-categories"><para>Categories for &tde; Menu, not
-used on desktop</para>
-</callout>
-</calloutlist>
-
-
-
-</sect2>
-
-<sect2 id="desktop-icons-exec">
-<title>The <varname>Exec</varname> option in <literal
-role="extension">.desktop</literal> files</title>
-
-<para>Following the command, you can have several place holders which will
-be replaced with the actual values when the actual program is run:
-<variablelist>
-<varlistentry>
-<term>%f</term> <listitem><para>A single file name; used when dropping
-file on icon, or with file associations.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%F</term>
-<listitem><para>A list of files; use for applications that can
-open several local files at once.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%u</term>
-<listitem><para>A single &URL;: if the app can
-handle &eg; &FTP; or &HTTP; &URL;s itself, otherwise &tde;.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%U</term>
-<listitem><para>A list of
-&URL;s; will download the file first and pass a local file to the app
-(!!)</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%d</term>
-<listitem><para>The folder of the file to open; useful if app needs to
-have file in current working directory.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%D</term>
-<listitem><para>A list of folders, not very practical.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%i</term>
-<listitem><para>The icon; <option>--icon</option> option; &tde; app
-will use icon from <varname>Icon</varname>= line in taskbar.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%m</term>
-<listitem><para>The mini-icon; legacy.</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>%c</term>
-<listitem><para>The caption; <option>--caption</option> option; &tde;
-app will use name from <varname>Name</varname>= line in
-taskbar.</para>
-</listitem>
-</varlistentry>
-
-</variablelist>
-</para>
-
-<informalexample>
-<para>Examples:
-<segmentedlist>
-<segtitle><varname>Exec</varname> line</segtitle>
-<segtitle>Command executed</segtitle>
-<seglistitem><seg>ksirc %i</seg><seg><command>ksirc --icon ksirc</command></seg>
-</seglistitem>
-<seglistitem><seg>cd %d; kedit $(basename %f)</seg><seg><command>cd /tmp; kedit file.txt</command></seg>
-</seglistitem>
-</segmentedlist>
-</para>
-</informalexample>
-
-<!--Dont' know what this refers to: -->
-<!--See What's This (Shift-F1) in Properties Dialog-->
-
-</sect2>
-
-<sect2 id="desktop-icons-devices">
-<title>Devices</title>
-<para>
-Links to Devices using <literal role="extension">.desktop</literal> file:
-o Create New -> Device
-
-</para>
-</sect2>
-
-<sect2 id="where-to-define">
-<title>Where to Define</title>
-
-<para>Many places to define Desktop Icons:
-<itemizedlist>
-
-<listitem><para><filename class="directory">~/Desktop</filename>:
-copied from <filename
-class="directory">/etc/skel/Desktop</filename></para></listitem>
-
-<listitem><para><filename
-class="directory">$<envar>TDEDIR</envar>/share/apps/kdesktop/Desktop</filename>
-(merged)</para></listitem>
-
-<listitem><para><filename
-class="directory">$<envar>TDEDIR</envar>/share/apps/kdesktop/DesktopLinks</filename>
-(copied)</para></listitem>
-
-<listitem><para>Device Icons (dynamically
-merged)</para></listitem>
-
-<listitem><para>Distribution Specific</para></listitem>
-
-</itemizedlist>
-</para>
-</sect2>
-</sect1>
-
-<sect1 id="tde-menu">
-<title>&tde; Menu</title>
-
-<sect2 id="how-it-works">
-<title>How it Works</title>
-
-<para>A common menu format is used as defined at
-<ulink
-url="http://freedesktop.org/Standards/menu-spec/">http://freedesktop.org/Standards/menu-spec/</ulink></para>
-
-<para>The menu format:
-<itemizedlist>
-<listitem><para>Defines structure in a single .menu file</para></listitem>
-<listitem><para>Is based on categories</para></listitem>
-<listitem><para>is shared between &tde;, &kde;, <acronym>GNOME</acronym>, and Xfce</para></listitem>
-<listitem><para>Supports applnk style menus as well</para></listitem>
-</itemizedlist>
-</para>
-
-<informalexample>
-<para>Example from <filename>tde-applications.menu</filename>:
-<programlisting>
-<markup>
-	&lt;Menu&gt;
-	    &lt;Name&gt;Office&lt;/Name&gt;
-	    &lt;Directory&gt;suse-office.directory&lt;/Directory&gt;
-	    &lt;Include&gt;
-	        &lt;Filename&gt;Acrobat Reader.desktop&lt;/Filename&gt;
-	        &lt;Filename&gt;tde-kpresenter.desktop&lt;/Filename&gt;
-	        &lt;Filename&gt;tde-kword.desktop&lt;/Filename&gt;
-	    &lt;/Include&gt;
-	&lt;Menu&gt;
-</markup>
-</programlisting>
-</para>
-<para>Menu entry with 3 applications:
-<itemizedlist>
-
-<listitem><para><filename>/usr/share/applications/Acrobat
-Reader.desktop</filename></para></listitem>
-
-<listitem><para><filename>/opt/trinity/share/applications/tde/kpresenter.desktop</filename></para></listitem>
-
-<listitem><para><filename>/opt/trinity/share/applications/tde/kword.desktop</filename></para></listitem>
-
-</itemizedlist>
-</para>
-</informalexample>
-</sect2>
-
-<sect2 id="stored-where">
-<title>Stored Where?</title>
-
-<para><literal role="extension">.menu</literal> files describing the
-menu structure. The files are stored in <filename
-class="directory">$<envar>TDEDIR</envar>/xdg/menus</filename> and
-<filename class="directory">/etc/xdg/menus</filename>. These store the
-system-wide menu structure and are controlled by
-$<envar>XDG_CONFIG_DIRS</envar>. <filename
-class="directory">$<envar>HOME</envar>/.config/menus</filename> stores
-user-specific changes to the menu structure and is controlled by
-$<envar>XDG_CONFIG_HOME</envar>. For more information, see <ulink
-url="http://www.freedesktop.org/Standards/basedir-spec">http://www.freedesktop.org/Standards/basedir-spec</ulink>.</para>
-
-<para><literal role="extension">.desktop</literal> files describe the
-applications and are stored in: <filename
-class="directory">$<envar>TDEDIR</envar>/share/applications</filename>,
-<filename class="directory">/usr/share/applications</filename>,
-<filename
-class="directory">/usr/local/share/applications</filename>. These are
-the system-wide application <literal
-role="extension">.desktop</literal> files which are controlled by
-$<envar>XDG_DATA_DIRS</envar>.</para>
-
-<para><filename
-class="directory">$<envar>HOME</envar>/.local/applications</filename>
-contains user-specific <literal role="extension">.desktop</literal>
-files and user-specific changes. It is controlled by
-$<envar>XDG_DATA_HOME</envar>. For more information, see <ulink
-url="http://www.freedesktop.org/Standards/basedir-spec">http://www.freedesktop.org/Standards/basedir-spec</ulink></para>
-
-
-<para><literal role="extension">.directory</literal> files describing
-the sub-menus are stored in: <filename
-class="directory">$<envar>TDEDIR</envar>/share/desktop-directories</filename>,
-<filename class="directory">/usr/share/desktop-directories</filename>, <filename
-class="directory">/usr/local/share/desktop-directories</filename>.
-These are the system-wide menu <literal
-role="extension">.directory</literal> files, controlled by
-$<envar>XDG_DATA_DIRS</envar>. The user-specific changes are stored in <filename class="directory">$<envar>HOME</envar>/.local/desktop-directories</filename>.
-These are controlled by $<envar>XDG_DATA_HOME</envar>. For more
-information, see <ulink url="http://www.freedesktop.org/Standards/basedir-spec">http://www.freedesktop.org/Standards/basedir-spec</ulink></para>
-
-<informalexample>
-<para>Example from <filename>tde-applications.menu</filename>:
-<programlisting>
-<markup>
-             &lt;Menu&gt;
-                        &lt;Name&gt;Art&lt;/Name&gt;
-                        &lt;Directory&gt;suse-edutainment-art.directory&lt;/Directory&gt;
-                        &lt;Include&gt;
-                                &lt;Category&gt;X-SuSE-Art&lt;/Category&gt;
-                        &lt;/Include&gt;
-                &lt;/Menu&gt;
-</markup>
-</programlisting>
-</para>
-
-<para><literal>Art</literal> is the internal name for this
-menu. <filename>suse-edutainment-art.directory</filename> defines the
-name and icon for this menu, and the menu includes all applications
-that have <literal>X-SuSE-Art</literal> listed as a category, &eg;:
-<programlisting>
-Categories=Qt;TDE;Education;X-SuSE-Art
-</programlisting></para>
-
-<para><filename>suse-edutainment-art.directory</filename> defines the
-name and icon for this menu:
-<programlisting>
-[Desktop Entry]
-Name=Art and Culture
-Icon=kcmsystem
-</programlisting>
-</para>
-</informalexample>
-</sect2>
-
-<sect2 id="common-pitfalls">
-<title>Common Pitfalls</title>
-
-<para>Applications <emphasis>not</emphasis> in the menu do
-<emphasis>not</emphasis> exist with regard to other applications or
-file associations: If you remove an application from the menu, &tde; assumes you don't want to use it.</para>
-
-<para>When applications are unwanted in the menu, either place them in
-<filename>.hidden</filename> menu or a dedicated menu with
-<programlisting>
-NoDisplay=true
-</programlisting> in the <literal
-role="extension">.directory</literal> file</para>
-</sect2>
-
-<sect2 id="essential-menus">
-<title>Essential Menus</title>
-
-<para><filename
-class="directory">/etc/trinity/xdg/menus/applications-merged/</filename>
-contains <filename>tde-essential.menu</filename> which includes some
-essential menus that are normally not shown in the &tde; menu itself:
-<itemizedlist>
-<listitem><para>Control Center has a hidden Settings menu whose
-contents are defined by <filename>tde-settings.menu</filename> and
-whose icon and name are defined by <filename>tde-settings.directory</filename></para>
-</listitem>
-<listitem><para>Screensavers contains a hidden System/Screensavers menu,
-whose contents are defined by
-<filename>tde-screensavers.menu</filename> and whose icon and  name
-are defined by
-<filename>tde-system-screensavers.directory</filename>.
-<filename>$<envar>TDEDIR</envar>/share/desktop-directories/tde-system-screensavers.directory</filename>
-contains:
-<programlisting>
-NoDisplay=true
-</programlisting>
-</para>
-</listitem>
-</itemizedlist></para>
-</sect2>
-
-<sect2 id="old-style-menus">
-<title>Old-Style Menus</title>
-
-<para>&tde; continues to support old-style menus that are defined by
-the directory structures in <filename
-class="directory">$<envar>TDEDIR</envar>/share/applnk</filename>
-(system wide) and <filename
-class="directory">$<envar>HOME</envar>/.trinity/share/applnk</filename>
-(user specific). This is observed unless the <literal role="extension">.desktop</literal> file has a  <varname>Categories</varname>= line. In that case the categories determine the location in the menu.</para>
-</sect2>
-
-<sect2 id="tdesycoca">
-<title><application>TDESycoca</application></title>
-<para><application>TDESycoca</application> caches menu structure and
-information about all available applications. You can rebuild the
-database with
-<userinput><command>tdebuildsycoca</command></userinput>. The database
-which is built lives in <filename
-class="directory">/var/tmp/tdecache-${<envar>USER</envar>}/tdesycoca</filename>.
-It is automatically updated by <application>KDED</application>,
-checked during &tde; login, and <application>KDED</application>
-watches for changes while logged in.</para>
-
-<para>To disable watching for changes (since it may hurt over NFS) add
-the following to <filename>tdedrc</filename>:
-<programlisting>
-[General]
-CheckSycoca=false
-</programlisting>
-</para>
-
-<para>To force regeneration, run <userinput><command>touch $<envar>TDEDIR</envar>/share/services/update_tdesycoca</command></userinput>.</para>
-
-</sect2>
-
-<sect2 id="kmenuedit">
-<title>&kmenuedit;</title>
-
-<para>&kmenuedit; is aimed at a single user setup. Changes to menu
-structure are saved to
-<filename>~/.config/menus/applications-tdemenuedit.menu</filename>,
-changes to applications are saved in <filename
-class="directory">~/.local/share/applications/</filename> and changes
-to sub-menus (icon, name) are saved in <filename
-class="directory">~/.local/share/desktop-directories/</filename>. The
-KIOSK Admin Tool uses &kmenuedit; and copies the above changes to
-profile- or system-wide locations.
-</para>
-
-</sect2>
-
-</sect1>
-
-<!-- This section might be redundant. If it isn't, it needs some screenies -->
-<sect1 id="tde-panel">
-<title>&tde; Panel</title>
-
-<para>The &tde; panel is also known as &kicker;. It is modular and
-consists of the following components:
-<itemizedlist>
-<listitem><para>Applets</para></listitem>
-<listitem><para>Application buttons</para></listitem>
-<listitem><para>Special Buttons</para></listitem>
-</itemizedlist>
-</para>
-
-<para>By default, the panel contains the following applets:
-<itemizedlist>
-<listitem><para>Pager - shows the virtual desktops</para></listitem>
-<listitem><para>Taskbar</para></listitem>
-<listitem><para>System Tray</para></listitem>
-<listitem><para>Clock</para></listitem>
-</itemizedlist>
-and the following special buttons:
-<itemizedlist>
-<listitem><para>&tde; menu</para></listitem>
-<listitem><para>Desktop Button</para></listitem>
-</itemizedlist>
-</para>
-
-<para>Various application buttons are also added, space permitting:
-<itemizedlist>
-<listitem><para>Home Button</para></listitem>
-<listitem><para>Browser Button</para></listitem>
-<listitem><para>KMail Button</para></listitem>
-</itemizedlist>
-</para>
-</sect1>
-
-<sect1 id="file-associations">
-<title>File Associations</title>
-
-<para>File associations associate a file type with an application or
-applications. The type of a file is established by determining its
-&MIME; type. &MIME; types known by &tde; are stored in <filename
-class="directory">$<envar>TDEDIR</envar>/share/mimelnk</filename> and
-each application's <literal role="extension">.desktop</literal> file
-contains a list of &MIME; types supported by that application.</para>
-
-<informalexample>
-<para><filename>kview.desktop</filename>:
-<programlisting>
-MimeType=image/gif;image/x-xpm;image/x-xbm;image/jpeg;
-image/x-bmp;image/png;image/x-ico;image/x-portable-bitmap;
-image/x-portable-pixmap;image/x-portable-greymap;
-image/tiff;image/jp2
-</programlisting>
-</para>
-
-<para><filename>kuickshow.desktop</filename>:
-<programlisting>
-MimeType=image/gif;image/x-xpm;image/x-xbm;image/jpeg;
-image/png;image/tiff;image/x-bmp;image/x-psd;image/x-eim;
-image/x-portable-bitmap;image/x-portable-pixmap;
-image/x-portable-greymap
-</programlisting>
-</para>
-
-<para>Both can open image/gif Which one is used to open a <literal role="extension">.gif</literal> file?</para>
-
-<para>The application with highest
-preference!. <filename>kview.desktop</filename> contains
-<programlisting>
-InitialPreference=3
-</programlisting>
-whereas <filename>kuickshow.desktop</filename> contains
-<programlisting>
-InitialPreference=6
-</programlisting>
-Therefore, &kuickshow; will be used to open <literal
-role="extension">.gif</literal> files.
-</para>
-
-<para>How can we make &kview;  default?</para>
-
-<para>A user can change file association in the
-&kcontrolcenter;. These changes are stored in
-<filename>$<envar>HOME</envar>/.trinity/share/config/profilerc</filename>.
-To use the same settings for multiple users, store these settings in
-user profile directory or the global &tde; config directory to use as
-default for multiple users.</para>
-
-</informalexample>
-
-</sect1>
-
-</chapter>
-
-<chapter id="locking-down-tde">
-<title>Locking Down &tde;</title>
-
-<sect1 id="how-it-works-the-basics">
-<title>How It Works - The Basics</title>
-
-<para>&tde;'s lock down features are centered around the following
-options:</para>
-
-<itemizedlist>
-<listitem><para><link linkend="immutable-configuration-options">Make
-configuration options immutable</link></para></listitem>
-<listitem><para><link linkend="action-restrictions">Restriction of specific
-actions</link></para></listitem>
-<listitem><para><link linkend="url-restrictions">Restrict access to certain
-&URL;s</link></para></listitem>
-<listitem><para><link linkend="configuration-modules">Restrict access to
-certain configuration modules</link></para></listitem>
-</itemizedlist>
-
-</sect1>
-
-<sect1 id="immutable-configuration-options">
-<title>Immutable Configuration Options</title>
-<subtitle>Locking Down &tde;</subtitle>
-
-<para>Immutable options allow system administrator to provide default
-settings that can not be changed by the user.</para>
-
-<para>Pre-existing configuration options of the user will be ignored once a
-configuration option is made immutable.</para>
-
-<para>Options can be controlled either on a per entry basis, per group of
-entries or on a file by file basis.</para>
-
-<para>If a file or group is immutable, all configuration options for that
-file or group are immutable, even those options for which the system
-administrator has no default provided.</para>
-
-<note><para>The support in applications for immutable options may vary from
-application to application. Although the user will not be able to make
-permanent changes to immutable configuration options, the user may still be
-presented with an user interface option to make such change.</para></note>
-
-</sect1>
-
-<sect1 id="action-restrictions">
-<title>Action Restrictions</title>
-
-<para>&tde; applications are built around the action-concept. Actions can be
-activated in various ways, typically via the menu-bar, one of the toolbars
-or a keyboard shortcut. <action>Save Document</action> is an example of an
-action. If you know the internal action name it is possible to restrict an
-action. When an action is restricted it will no longer appear in the
-menu-bar or toolbar. The internal name for the <action>Save
-Document</action> action is <option>action/file_save</option>. The lock
-down framework also provides a set of more abstract restrictions which can
-be used to disable functionality not covered by a single action. An example
-is the <option>shell_access</option> restriction which disables all
-functionality that would offer the user access to a &UNIX; shell.</para>
-
-<example>
-<title>Restrict User Access to Shells</title>
-
-<para>In order to prevent the user access to a command shell we can restrict
-the <option>shell_access</option> action by adding the following to
-<filename>kdeglobals</filename>:
-</para>
-
-<screen>[TDE Action Restrictions]
-shell_access=false</screen>
-
-<para>Since this affects the &tde; menu and the available applications, we
-must force an update of the sycoca database:</para>
-
-<screen><userinput><command>touch</command> <filename>$<envar>TDEDIR</envar>/share/services/update_tdesycoca</filename></userinput></screen>
-
-<para>Now re-login to &tde; and check the following points:</para>
-
-<itemizedlist>
-<listitem><para>The &kmenu;</para></listitem>
-<listitem><para>In &konqueror;,
-<menuchoice><guimenu>Tools</guimenu><guimenuitem>Open
-Terminal</guimenuitem></menuchoice></para></listitem>
-<listitem><para>The <keycombo
-action="simul">&Alt;<keycap>F2</keycap></keycombo> run
-command</para></listitem>
-</itemizedlist>
-</example>
-<!--<para>Full documentation about available actions can be found on <ulink
-url="http://techbase.kde.org/KDE_System_Administration/Kiosk/Keys">
-http://techbase.kde.org/KDE_System_Administration/Kiosk/Keys</ulink>.</para>-->
-
-<para>A few of the more interesting actions are listed below:</para>
-
-<variablelist>
-<varlistentry>
-<term><option>action/options_configure</option></term>
-<listitem><para>The <guimenuitem>Configure</guimenuitem> option form the
-<guimenu>Settings</guimenu> menu</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>action/help_report_bug</option></term>
-<listitem><para>The <guimenuitem>Report Bug/Request Enhancement...</guimenuitem> option from the
-<guimenu>Help</guimenu> menu.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>action/kdesktop_rmb</option></term>
-<listitem><para>&RMB; mouse button menu on the desktop.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>action/kicker_rmb</option></term>
-<listitem><para>&RMB; mouse button menu on the panel.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>user/root</option></term>
-<listitem><para>Hide all actions or applications that require <systemitem
-class="username">root</systemitem> access.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>shell_access</option></term>
-<listitem><para>Hides all actions or applications that provide shell
-access.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>print/system</option></term>
-<listitem><para>Disables the option to select the printing system
-(backend).</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>lock_screen</option></term>
-<listitem><para>Whether the user will be able to lock the
-screen</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>start_new_session</option></term>
-<listitem><para>Whether the user may start a second X session (see also
-&tdm;)</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>opengl_screensavers</option></term>
-<listitem><para>Whether OpenGL screensavers are allowed to be
-used.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><option>manipulatescreen_screensavers</option></term>
-<listitem><para>Permit screensavers that do not hide the entire
-screen</para></listitem>
-</varlistentry>
-</variablelist>
-
-</sect1>
-
-<sect1 id="url-restrictions">
-<title>&URL; Restrictions</title>
-
-<para>There are three types of restrictions that can be applied to
-&URL;s:</para>
-
-<variablelist>
-<varlistentry>
-<term>list</term>
-<listitem><para>To control whether a directory listing is
-allowed.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term>open</term>
-<listitem><para>To control whether certain &URL;s can be
-opened</para></listitem>
-</varlistentry>
-<varlistentry>
-<term>Redirect</term>
-<listitem><para>To control whether one &URL; can open another &URL;, either
-automatically or via a hyperlink.</para></listitem>
-</varlistentry>
-</variablelist>
-
-<para>Rules are checked in the order in which they are defined. The last
-rule that is applicable to a &URL; defines whether the &URL; may be
-accessed.</para>
-
-<para>The following rules disable opening http and https &URL;s outside
-<systemitem class="domainname">.ourcompany.com</systemitem>:</para>
-
-<screenco><areaspec>
-<area id="url_commas" coords="3"/>
-<area id="url_rule1" coords="3"/>
-<area id="url_rule2" coords="4"/>
-</areaspec>
-<screen>[TDE URL Restrictions]
-rule_count=2
-rule_1=open,,,,http,,,false
-rule_2=open,,,,http,*.ourcompany.com,,true</screen></screenco>
-
-<calloutlist>
-<callout arearefs="url_commas">
-<para>The first four commas skip over the selection criteria with respect to
-the originating &URL;. This part is only needed with redirect type
-rules.</para>
-</callout>
-<callout arearefs="url_rule1"><para><option>rule_1</option> forbids the
-opening of any http or https &URL;</para></callout>
-<callout arearefs="url_rule2"><para><option>rule_2</option> allows the
-opening of any http and https &URL; in the <systemitem
-class="domainname">.ourcompany.com</systemitem> domain. Note the wildcard
-<token>*</token> is only allowed at the start of a domain.</para></callout>
-</calloutlist>
-
-<para>The following rules makes that the user can no longer browse
-directories on the local file system that are outside his
-$<envar>HOME</envar> directory:</para>
-
-<screenco><areaspec>
-<area id="home_rule1" coords="3"/>
-<area id="home_rule2" coords="4"/>
-</areaspec>
-<screen>[TDE URL Restrictions]
-rule_count=2
-rule_1=list,,,,file,,,false
-rule_2=list,,,,file,,$HOME,true</screen></screenco>
-
-<calloutlist>
-<callout arearefs="home_rule1"><para><option>rule_1</option> forbids the
-listing of any local directory</para></callout>
-<callout arearefs="home_rule2"><para><option>rule_2</option> allows listing
-directories under the users own $<envar>HOME</envar>
-directory.</para></callout>
-</calloutlist>
-
-<para>$<envar>HOME</envar> and $<envar>TMP</envar> are special values to
-indicate the users home directory and the &tde; temporary directory of the
-user, &eg; <filename class="directory">/tmp/tde-bastian</filename></para>
-
-<para>The following rules makes that the user can no longer open local files
-that are outside his $<envar>HOME</envar> directory:</para>
-
-<screenco><areaspec>
-<area id="local_rule1" coords="3"/>
-<area id="local_rule2" coords="4"/>
-<area id="local_rule3" coords="5"/>
-</areaspec>
-<screen>[TDE URL Restrictions]
-rule_count=3
-rule_1=open,,,,file,,,false
-rule_2=open,,,,file,,$HOME,true
-rule_3=open,,,,file,,$TMP,true</screen></screenco>
-
-<calloutlist>
-<callout arearefs="local_rule1"><para><option>rule_1</option> forbids the
-opening of any local file</para></callout>
-<callout arearefs="local_rule2"><para><option>rule_2</option> allows opening
-files under the users own $<envar>HOME</envar> directory.</para></callout>
-<callout arearefs="local_rule3"><para><option>rule_3</option> allows opening
-files in the &tde; temporary directory of the user. This is needed by
-certain &tde; applications that first download a file or document to the
-temporary directory and then open it in an application.</para></callout>
-</calloutlist>
-
-
-<para>The redirection option controls whether documents from a certain
-location can refer, either automatically or manually via a hyperlink, to a
-certain other location. A set of default rules is present as a general
-security measure. For example documents located on the Internet may not
-refer to locally stored documents.</para>
-
-<para>For example, if we want to give the intranet-server <systemitem
-class="systemname">www.mycompany.com</systemitem> the possibility to refer
-to local files we could add the following rule:</para>
-
-<screen>[TDE URL Restrictions]
-rule_count=1
-rule_1=redirect,http,www.mycompany.com,,file,,,true</screen>
-
-<para>Instead of listing a protocol by name, it is also possible to specify
-a whole group of protocols. For that the following groups have been
-defined:</para>
-
-<variablelist>
-<varlistentry>
-<term>:local</term>
-<listitem><para>Protocols that access locally stored information, examples
-are file:/, man:/, fonts:/, floppy:/</para></listitem>
-</varlistentry>
-<varlistentry>
-<term>:internet</term>
-<listitem><para>Common internet protocols such as http and
-ftp</para></listitem>
-</varlistentry>
-</variablelist>
-
-<para>Information about protocols is stored in <literal
-role="extension">*.protocol</literal> files stored in
-<filename
-class="directory">$<envar>TDEDIR</envar>/share/services</filename>.</para>
-
-<para>The <option>Class</option>= entry defines the group a protocol is part
-of:
-<userinput><command>grep</command> <option>Class=</option>
-<filename>$<envar>TDEDIR</envar>/share/services/*.protocol</filename></userinput></para>
-
-<para>General rules:</para>
-
-<itemizedlist>
-<listitem><para>The :local protocols may refer to any other
-protocol</para></listitem>
-<listitem><para>It's always allowed to refer to an :internet
-protocol</para></listitem>
-<listitem><para>Not all protocols are part of a group, fish:/ for
-example.</para></listitem>
-</itemizedlist>
-
-</sect1>
-
-<sect1 id="configuration-modules">
-<title>Configuration Modules</title>
-
-<para>&tde; has configuration modules to configure various aspects of the
-&tde; environment. Configuration modules appear in the Control Center, in the
-Configuration dialog of an application or in both.</para>
-
-<informalexample>
-<para>The proxy configuration module appears in the Control Center but also
-as part of the <guilabel>Configure Konqueror</guilabel> dialog in
-&konqueror;</para>
-
-<para>Individual configuration modules can be started with
-<command>tdecmshell</command> <replaceable>module</replaceable></para>
-
-<para>To start the Proxy module use:</para>
-<itemizedlist>
-<listitem><para><command>tdecmshell</command>
-<filename>tde-proxy.desktop</filename></para></listitem>
-<listitem><para><command>tdecmshell</command>
-<filename>tde-proxy</filename></para></listitem>
-<listitem><para><command>tdecmshell</command> proxy</para></listitem>
-</itemizedlist>
-
-<para><note><para>Not all applications use configuration modules, often the
-configuration dialog is an integral part of the application
-itself.</para></note></para>
-</informalexample>
-
-<para>All configuration modules are strictly speaking part of the &tde;
-menu.</para>
-
-<itemizedlist>
-<listitem>
-<para>The modules that are visible in the Control Center normally
-have a <literal role="extension">.desktop</literal> file in <filename
-class="directory">$<envar>TDEDIR</envar>/share/applications/tde</filename>
-and are sorted under the hidden <guimenu>Settings-Modules</guimenu> menu by
-the <filename>tde-settings.menu</filename>, included from
-<filename>tde-essential.menu</filename></para>
-<screen><userinput><command>tdebuildsycoca</command> <option>--menutest</option> 2&gt; /dev/null | <command>grep</command> Settings-Modules</userinput></screen>
-</listitem>
-<listitem>
-<para>Application specific modules normally have a <literal role="extension">.desktop</literal> file under
-<filename>$<envar>TDEDIR</envar>/share/applnk/.hidden</filename> which
-corresponds to the hidden .hidden menu, included as a result of
-<markup>&lt;KDELegacyDirs/&gt;</markup></para>
-<screen><userinput><command>tdebuildsycoca</command> <option>--menutest</option> 2&gt; /dev/null | <command>grep</command> .hidden</userinput></screen>
-</listitem>
-<listitem><para>It is possible to edit the Control Center with
-<application>kcontroledit</application>.
-<application>kcontroledit</application> works like
-<application>kmenuedit</application>, changes for current user only. Use
-<application>kiosktool</application> to make changes for
-everyone.</para></listitem>
-</itemizedlist>
-
-<para>Individual configuration modules can be disabled by adding the
-following to <filename>kdeglobals</filename>:</para>
-
-<screen>[TDE Control Module Restrictions]
-<replaceable>module-id</replaceable>=false</screen>
-<para>For example, to disable the proxy module use</para>
-<screen>[TDE Control Module Restrictions]
-tde-proxy.desktop=false</screen>
-<para>Check the Control Center and the <guilabel>Configure
-Konqueror</guilabel> dialog if the proxy configuration is still
-there.</para>
-
-</sect1>
-
-</chapter>
-
-<chapter id="the-lazy-admin">
-<title>The Lazy Admin</title>
-
-<!-- This section appears to need quite a lot of additional words to -->
-<!-- make sense. Perhaps it would be better to comment it out if it -->
-<!-- can't be updated before the next release (Phil) -->
-<!-- FIXME: Commented it out until it's got some more content fleshing it -->
-<!-- out (Lauri)
-
-<sect1 id="lazy-admin-overview">
-<title>Overview</title>
-
-<para>
-The Lazy Admin
-Overview
-Deployment
-	How to get &tde; available on many clients
-Remote Desktop Sharing
-Take a look at someone else desktop
-DCOP
-	The DCOP command line tool makes it possible to control &tde; applications from the command line
-KDialog
-	A versatile tool to use standard &tde; dialogs in your own scripts
-
-
-
-Deployment
-Thin Clients
-Installing Software
-= AutoYaST
-= KickStart
-Maintaining Settings
-= /etc/tderc, other settings
-= Use rsync to copy files around
-= Shared filesystem such as NFS
-o store profiles themselves on NFS
-
-
-
-http://www.suse.de/~nashif/autoinstall/index.html
-
-</para>
-</sect1>
--->
-<sect1 id="remote-desktop-sharing">
-<title>Remote Desktop Sharing</title>
-
-<para>Remote desktop sharing allows remote users to view and optionally
-control the desktop of the current user. The remote user needs to be sent
-an invitation, and it is possible to create a password protected standing
-invitation. This is ideal for tech support teams or administrators to gain
-access to users desktops in order to troubleshoot or remedy a problem or
-guide a user through a procedure.</para>
-
-<para>Remote desktop sharing involves two applications: &krfb; (&tde; remote
-frame buffer, a VNC server) and &krdc; (&tde; remote desktop connection; a
-VNC client.)</para>
-
-<para>&krfb; can be used by any user to create and manage invitations.
-Invitations create a one time password that allows the recipient to connect
-to your desktop. By default it is valid for only one successful connection,
-and expires after one hour if not used.</para>
-
-<para>Incoming connections are handled by the kinetd kded module. You can
-use the command <userinput><command>dcop</command> kded kinetd
-services</userinput> to see if it is running. &krfb; waits for connections
-on port 5900 by default. When an incoming connection is made, a dialog will
-appear to ask for confirmation by the current user.</para>
-
-<!-- TODO: Write a bit more here, with a walk through maybe? -->
-
-</sect1>
-
-<sect1 id="tde-diy">
-<title>&tde; DIY - Building Your Own Tools</title>
-
-<sect2 id="dcop">
-<title>DCOP</title>
-
-<para>
-Desktop COmmunication Protocol, <acronym>DCOP</acronym>, is a lightweight mechanism for inter-process communication.
-<acronym>DCOP</acronym> allows the user to interact with programs that are currently running.
-&tde; supplies two programs to utilitize <acronym>DCOP</acronym>:
-<application>dcop</application>, a command-line program, and
-<application>kdcop</application>, a <acronym>GUI</acronym> program.
-</para>
-<para>
-A few notes about using <command>dcop</command>:
-</para>
-
-<para>
-<itemizedlist>
-<listitem>
-<para>
-<command>dcop</command> [options] [application [object [function [arg1] [arg2] ... ] ] ]
-</para>
-</listitem>
-<listitem>
-<para>
-Applications that can open more than one window at a time will be listed as
-&lt;application&gt;-<acronym>PID</acronym>
-</para>
-</listitem>
-<listitem>
-<para>
-All the arguments are case-sensitve. setFullScreen and setfullscreen are two different functions.
-</para>
-</listitem>
-<listitem>
-<para>
-The regular expression token * can be used in the application and object arguments.
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> kon*</option></userinput>
-konqueror-16006
-konsole-8954
-</screen>
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-<para>Some example commands and their output are below:
-</para>
-
-<informalexample>
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> konsole*</option></userinput>
-konsole-8954
-</screen>
-<para>One &konsole; is running with a <acronym>PID</acronym> of 8954.</para>
-
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> konsole-8954</option></userinput>
-KBookmarkManager-.../share/apps/tdefile/bookmarks.xml
-KBookmarkManager-.../share/apps/konqueror/bookmarks.xml
-KBookmarkNotifier
-KDebug
-MainApplication-Interface
-konsole (default)
-konsole-mainwindow#1
-tdesycoca
-session-1
-session-2
-session-3
-session-4
-</screen>
-<para>Here you see that there are four sessions running.</para>
-
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> konsole-8954</option><option> konsole</option></userinput>
-QCStringList interfaces()
-QCStringList functions()
-int sessionCount()
-QString currentSession()
-QString newSession()
-QString newSession(QString type)
-QString sessionId(int position)
-void activateSession(QString sessionId)
-void nextSession()
-void prevSession()
-void moveSessionLeft()
-void moveSessionRight()
-bool fullScreen()
-void setFullScreen(bool on)
-ASYNC reparseConfiguration()
-</screen>
-<para>Here are the options for the main &konsole; program.
-</para>
-
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> konsole-8954</option><option> session-1</option></userinput>
-QCStringList interfaces()
-QCStringList functions()
-bool closeSession()
-bool sendSignal(int signal)
-void clearHistory()
-void renameSession(QString name)
-QString sessionName()
-int sessionPID()
-QString schema()
-void setSchema(QString schema)
-QString encoding()
-void setEncoding(QString encoding)
-QString keytab()
-void setKeytab(QString keyboard)
-QSize size()
-void setSize(QSize size)
-</screen>
-<para>Here are the options for the first session, session-1.</para>
-
-<screen><prompt>&percnt; </prompt><userinput><command>dcop</command><option> konsole-8954</option><option> konsole</option><option> setFullScreen</option><parameter> true</parameter></userinput>
-</screen>
-<para>This sets &konsole; to full screen.</para>
-
-</informalexample>
-
-<para>
-When there is more than one application/object, which one should you use?
- Got a reference?
-</para>
-<screen><prompt>&percnt; </prompt><userinput><command>echo</command><option> $KONSOLE_DCOP</option></userinput>
-DCOPRef(konsole-7547,konsole)
-
-<prompt>&percnt; </prompt><userinput><command>dcop</command><option> $KONSOLE_DCOP</option><option> newSession</option></userinput>
-session-6
-
-<prompt>&percnt; </prompt><userinput><command>dcopstart</command><option> konsole</option></userinput>
-konsole-9058
-
-
-#!/bin/sh
-konsole=$(dcopstart konsole-script)
-session=$(dcop $konsole konsole currentSession)
-dcop $konsole $session renameSession Local
-
-session=$(dcop $konsole konsole newSession)
-dcop $konsole $session renameSession Remote
-
-session=$(dcop $konsole konsole newSession)
-dcop $konsole $session renameSession Code
-dcop $konsole $session sendSession 'cd /my/work/directory'
-
-</screen>
-
-</sect2>
-
-<sect2 id="kdialog">
-<title>KDialog</title>
-<subtitle>&tde; DIY - Building Your Own Tools</subtitle>
-
-<para>You can use &tde; dialogs from your own scripts, to combine the power
-of &UNIX; shell scripting with the ease of use of &tde;.</para>
-
-<screen><userinput><command>kdialog</command> <option>--msgbox 'You have new mail!'</option></userinput></screen>
-
-<screen><userinput><command>kdialog</command> <option>--title 'New Mail'</option> <option>--msgbox 'You have new mail!'</option></userinput></screen>
-
-<para>The <application>KDialog</application> part can be replaced via
-<option>--caption</option> option</para>
-
-<screen><userinput><command>kdialog</command> <option>--title 'New Mail'</option> <option>--msgbox 'You have new mail!'</option> <option>--dontagain myfile:mykey</option></userinput></screen>
-
-<para>Saves whether to show again in
-<filename>$<envar>TDEHOME</envar>/share/config/myfile</filename> (by writing
-into this file the following lines:</para>
-
-<screen>[Notification Messages]
-mykey=false</screen>
-
-<para>Instead of <option>--msgbox</option> you can also use
-<option>--sorry</option> and <option>--error</option>, as appropriate. For
-instance, you might use <command>kdialog</command> <option>--sorry 'The
-network can not be reached'</option> or <command>kdialog</command>
-<option>--error 'Mail box can not be opened'</option>.</para>
-
-<para>It is also possible to create message boxes that accept a yes or no
-answer.</para>
-
-<screen><command>kdialog</command> <option>--yesno 'Do you want to connect
-to the Internet?'</option> <command>echo</command> <returnvalue>$?</returnvalue></screen>
-
-<informaltable>
-<tgroup cols="2">
-<thead>
-<row>
-<entry>Return Value</entry>
-<entry>Meaning</entry>
-</row>
-</thead>
-<tbody>
-<row><entry>0</entry><entry>Yes, OK, Continue</entry></row>
-<row><entry>1</entry><entry>No</entry></row>
-<row><entry>2</entry><entry>Cancel</entry></row>
-</tbody>
-</tgroup>
-</informaltable>
-
-<para>Make sure to store the result in a variable if you do not use it
-directly, the next command will fill $? with a new value You can use
-<option>--dontagain</option> here as well, it will remember the users choice
-and returns it the next times without showing the dialog any more.</para>
-
-<para>Further variations are:</para>
-
-<variablelist>
-<varlistentry>
-<term><option>--warningyesno</option></term>
-<listitem>
-<para>like <option>--yesno</option> but with a different
-icon</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><option>--warningcontinuecancel</option></term>
-<listitem><para>With <guibutton>Continue</guibutton> and
-<guibutton>Cancel</guibutton> buttons.</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><option>--warningyesnocancel</option></term>
-<listitem><para>With <guibutton>Yes</guibutton>, <guibutton>No</guibutton>
-and <guibutton>Cancel</guibutton> button. For example:</para>
-<screen><command>kdialog</command> <option>--warningyesnocancel 'Do you want
-to save the changes?'</option></screen>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<screen><command>kdialog</command> <option>--inputbox "Enter your name:" "YourName"</option></screen>
-
-<para>The result is printed to stdout, to put it in a variable you can use
-<userinput>name=$(kdialog --inputbox "Enter your name:"
-"YourName")</userinput>. The last argument is optional, it is used to
-pre-fill the dialog.</para>
-
-<screen><userinput><varname>password</varname>=$(<command>kdialog</command> <option>--password "Enter your password:"</option>)</userinput></screen>
-
-<para>The <option>--dontagain</option> option does not work with
-<option>--inputbox</option> or <option>--password</option></para>
-
-<para>There are two dialogs that let the user make a choice from a
-list:</para>
-
-<variablelist>
-<varlistentry>
-<term><option>--menu</option></term>
-<listitem>
-<para>Lets the user select a single item from a list.</para>
-</listitem>
-</varlistentry>
-<varlistentry>
-<term><option>--checklist</option></term>
-<listitem>
-<para>Lets the user select one or more items from a list.</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<screen><userinput><varname>city</varname>=$(<command>kdialog</command> <option>--menu "Select a city" a London b Madrid c Paris d Berlin</option>)</userinput></screen>
-
-<para><varname>$city</varname> will <returnvalue>a</returnvalue>, <returnvalue>b</returnvalue>, <returnvalue>c</returnvalue> or <returnvalue>d</returnvalue>.</para>
-
-<screen><userinput><varname>city</varname>=$(<command>kdialog</command> <option>--checklist "Select cities" a London off b Madrid on c Paris on d Berlin off</option>)</userinput></screen>
-
-<para>Madrid and Paris will be pre-selected. The result with Madrid and
-Paris selected will be <returnvalue>"b"</returnvalue>
-<returnvalue>"c"</returnvalue>.</para>
-
-<para>If you add the <option>--separate-output</option> option, it will put
-<returnvalue>b</returnvalue> and <returnvalue>c</returnvalue> each on a line
-of its own, making the result easier to process.</para>
-
-<screen>file=$(kdialog --getopenfilename $HOME)
-file=$(kdialog --getopenfilename $HOME "*.png *.jpg|Image Files")
-file=$(kdialog --getsavefilename $HOME/SaveMe.png)
-file=$(kdialog --getexistingdirectory $HOME)</screen>
-
-</sect2>
-
-</sect1>
-
-</chapter>
-
-&groupware-with-kontact;
-
-</book>