Move the khelpcenter guides to the directory level in which they are installed.

Signed-off-by: Slávek Banko <[email protected]>

3 files changed, 0 insertions, 1350 deletions

diff --git a/doc/quickstart/CMakeLists.txt b/doc/quickstart/CMakeLists.txt
deleted file mode 100644
index ba7a81cfd..000000000
--- a/doc/quickstart/CMakeLists.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-#################################################
-#
-#  (C) 2010-2011 Serghei Amelian
-#  serghei (DOT) amelian (AT) gmail.com
-#
-#  Improvements and feedback are welcome
-#
-#  This file is released under GPL >= 2
-#
-#################################################
-
-tde_create_handbook( DESTINATION khelpcenter/quickstart )
diff --git a/doc/quickstart/Makefile.am b/doc/quickstart/Makefile.am
deleted file mode 100644
index 7e42282c4..000000000
--- a/doc/quickstart/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-
-KDE_LANG = en
-KDE_DOCS = khelpcenter/quickstart
diff --git a/doc/quickstart/index.docbook b/doc/quickstart/index.docbook
deleted file mode 100644
index a70ab467c..000000000
--- a/doc/quickstart/index.docbook
+++ /dev/null
@@ -1,1335 +0,0 @@
-<?xml version="1.0" ?>
-<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [
-  <!ENTITY kappname "Quickstart Guide to &tde;">
-  <!ENTITY package "tdebase">
-  <!ENTITY % addindex "IGNORE">
-  <!ENTITY % English "INCLUDE" > <!-- change language only here -->
-]>
-
-<book lang="&language;">
-
-<bookinfo>
-
-<title>Quickstart Guide to &tde;</title>
-
-<authorgroup>
-<author>&tde-authors;</author>
-<!-- TRANS:ROLES_OF_TRANSLATORS -->
-</authorgroup>
-
-<date>&tde-release-date;</date>
-<releaseinfo>&tde-release-version;</releaseinfo>
-
-<copyright>
-<year>1999-2002</year>
-<holder>The &kde; Team</holder>
-</copyright>
-<copyright>
-<year>&tde-copyright-date;</year>
-<holder>&tde-team;</holder>
-</copyright>
-
-<legalnotice>&FDLNotice;</legalnotice>
-
-<abstract>
-<para>Quickstart Guide to &tde;</para>
-<para>An introduction to the Trinity Desktop Environment</para>
-</abstract>
-
-<keywordset>
-<keyword>KDE</keyword>
-<keyword>TDE</keyword>
-<keyword>quick start</keyword>
-<keyword>introduction</keyword>
-</keywordset>
-</bookinfo>
-
-<chapter id="introduction">
-<title>Introduction</title>
-
-<para>
-This guide provides a brief introduction to the Trinity Desktop Environment. It
-will familiarize you with some of the basic features of &tde;.
-</para>
-
-<para>
-This guide does not cover all aspects of the Trinity Desktop or even most
-of them. This guide only describes some of the most basic ways to accomplish a few
-of the most common tasks. The <ulink url="help:/khelpcenter/userguide">&tde; User's Guide</ulink>
-provides detailed coverage of using Trinity.
-</para>
-
-<para>
-Use this guide with the presumption of being familiar with at least one graphical
-user interface, such as <trademark>CDE</trademark>,
-<trademark>Geos</trademark>, <trademark>GEM</trademark>, &NeXTSTEP;,
-&Mac;, <trademark>OS/2</trademark> or &Microsoft; &Windows;. Basic concepts, such as
-using the mouse or keyboard are not explained in this guide.
-</para>
-
-</chapter>
-
-<chapter id="an-overview-of-kde">
-<title>An Overview of &tde;</title>
-
-<para>
-This section is for users who prefer to learn by exploring and want
-only a brief orientation to get started. Later sections provide a more
-thorough introduction to the environment, with helpful hints and
-shortcuts. If you are impatient to get started, skim this section, go
-play for a bit, then come back and peruse the other sections of this
-guide as needed.
-</para>
-
-<note>
-<para>
-&tde; provides a highly configurable desktop environment. This
-overview presumes that you are using the default environment.
-</para>
-</note>
-
-<sect1 id="the-kde-desktop">
-<title>The &tde; Desktop</title>
-
-<para>A typical Trinity desktop consists of several parts:</para>
-
-<itemizedlist>
-<listitem>
-<para>A <interface>panel</interface> at the bottom of the screen, used
-to start applications and switch between desktops. Among other things, it
-contains the &kmenu;, with an &ticon;
-that displays a menu of applications to start.
-</para>
-</listitem>
-
-<listitem>
-<para>
-A <interface>taskbar</interface>, by default embedded in the panel, used
-to switch between and manage currently running applications. Click on an
-application on the taskbar to switch to the application.
-</para>
-</listitem>
-
-<listitem>
-<para>
-The <interface>desktop</interface> itself, on which frequently used
-files and folders might be placed. &tde; provides multiple desktops,
-each of which has its own windows. Click on the numbered buttons on
-the panel to switch between desktops.
-</para>
-</listitem>
-</itemizedlist>
-
-</sect1>
-
-<sect1 id="ready-set-go">
-<title>Ready, Set, Go!</title>
-
-<para>Here are a few quick tips to get you up and running.</para>
-
-<itemizedlist>
-<listitem>
-<para>
-To start an application, click on the &ticon; button on
-the panel (called the <link linkend="starter">&kmenu;</link>)
-and choose an item from the menu.
-</para>
-</listitem>
-<listitem>
-<para>
-Click the icon that looks like a picture of a house on
-the panel to access the files in your home folder using
-&konqueror;, &tde;'s File Manager utility.
-</para>
-</listitem>
-<listitem>
-<para>Choose <menuchoice><guimenu>TDE menu</guimenu>
-<guisubmenu>System</guisubmenu>
-<guimenuitem>Konsole</guimenuitem></menuchoice> to get a &UNIX;
-command prompt, or press <keycombo action="simul">&Alt;
-<keycap>F2</keycap></keycombo> to get a mini command prompt window to
-execute a single command.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Choose the <menuchoice><guimenuitem>Control Center</guimenuitem>
-</menuchoice> item on the &kmenu; to configure &tde;.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Press <keycombo action="simul">&Alt;<keycap>Tab</keycap></keycombo> to
-switch between applications and <keycombo
-action="simul">&Ctrl;<keycap>Tab</keycap></keycombo> to switch between
-desktops using the keyboard.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Use the &RMB; mouse button to access context menus for the panel,
-desktop, and most &tde; applications.
-</para>
-</listitem>
-</itemizedlist>
-
-</sect1>
-</chapter>
-
-<chapter id="launching-applications">
-<title>Launching Applications</title>
-
-<sect1 id="starter">
-<title>Using the &kmenu; and the Panel</title>
-
-<para>
-At the bottom of the screen you will find the desktop panel, which is called
-&kicker;. Use the panel to launch applications. Have a look at the
-button on the left with a large &ticon;.
-</para>
-
-<para>
-This button is called the &kmenu;. When the mouse pointer hovers over the icon,
-a small arrow on the top indicates that it will pop up a menu if you
-click on it. The popup offers you easy access to all &tde;
-applications installed on your computer system.
-</para>
-
-<sect2>
-<title>Customizing &kicker;</title>
-
-<!-- FIXME: To add a button, use the little arrows on kicker, not the TDE menu
-I am not sure I agree - some distributions fade or hide the applet handles by default, but
-I haven't found one yet that hides the kmenu. (JLH) -->
-
-<para>If you use one application or tool very often, then you might want to have fast
-access to it. In this case you can add a single application or an entire sub-menu of the
-&kmenu; as a special quick-launch button on the panel. If you want to reach an application
-directly via a launch button, click with the &RMB; either on a clear space on the panel or on the
-&kmenu; icon. Select <menuchoice><guimenu>Panel Menu</guimenu> <guisubmenu>Add Application to Panel...
-</guisubmenu></menuchoice> and then navigate to the application or menu you would like to add to
-the panel.</para>
-
-
-<para>
-You can add an entire menu this way, or one of the &ticon;
-button sub-menus. For example, if you have &koffice; installed and
-want quick access to all the &koffice; applications, without having to
-navigate through the &kmenu;, then instead of choosing an
-application, click on the <guimenuitem>Add Menu to Main Panel</guimenuitem> menu
-entry. Thereafter you will have instant access to all the &koffice;
-applications, without having to put an icon for each on the panel.
-</para>
-
-<note>
-<para>
-You can move all items of the panel around with the
-<guimenuitem>Move</guimenuitem> command of the context menu. Just click
-with the <mousebutton>third</mousebutton> mouse button (the
-<mousebutton>third</mousebutton> mouse button is normally the
-<mousebutton>right</mousebutton> button, but if you have configured your
-mouse differently, for example for left-handers, it might also be the
-<mousebutton>left</mousebutton> one). A menu will pop up where you can
-choose <guimenuitem>Move</guimenuitem>. Now move the mouse and see how
-the icon follows while still staying on the panel. When you are done,
-simply press the <mousebutton>first</mousebutton> mouse button (by default
-the <mousebutton>left</mousebutton> one). As you might have noticed,
-there is also a menu entry <guimenuitem>Remove</guimenuitem> in case you
-are tired of a certain launch button on your desktop.
-</para>
-</note>
-
-</sect2>
-
-<sect2>
-<title>Using Context menus</title>
-
-<para>
-This leads us to another interesting topic: in many places, you can
-click the <mousebutton>right</mousebutton> mouse button to display a
-<interface>context menu</interface> with choices that are applicable to
-the item you clicked. It is therefore always a good idea to try out the
-<mousebutton>third</mousebutton> mouse button on something, if you do
-not know what to do with it. Even the background of the desktops has
-such a menu!
-</para>
-
-</sect2>
-
-<sect2>
-<title>Other Panel features</title>
-
-<para>
-There are other interesting things possible with the panel. One
-might be important if you have a low resolution on your monitor: it is
-the <quote>hide-and-show</quote> function, activated by clicking on the
-small arrowed button, which is at one or both ends of the panel.
-</para>
-
-<para>
-Perhaps you just do not like the panel extending the full width of the
-screen. That's easily changed!  &RMB; on an empty space in the panel,
-and choose <menuchoice><guimenuitem>Configure Panel...</guimenuitem></menuchoice>. In the &kcontrolcenter;
-dialog that pops up, you can choose <guilabel>Length</guilabel> on
-the <guilabel>Appearance</guilabel> tab, and use the slider there to set
-the panel to less than 100% width.
-</para>
-
-<para>
-If you're following along, and have that dialog open anyway, then feel
-free to play with all the options, and use the
-<guibutton>Apply</guibutton> to see the effect they have. You can
-easily reset everything to the default configuration, by simply pressing
-the <guibutton>Use Defaults</guibutton> button.
-</para>
-
-<para>
-By the way, if you are not sure what a certain button does in &tde;,
-just move the mouse pointer over it and wait for a short while: &tde;
-has a built-in mini context help, called <quote>tool tips</quote>, which
-explains the functionality of such controls in a few words.
-</para>
-
-
-</sect2>
-</sect1>
-
-<sect1 id="want-command-line-back">
-<title>I want access to the command line!</title>
-
-<para>
-There is nothing to fear. &tde; does not remove the
-effective command line. You can move
-your files with the desktop, but you can also use the &UNIX; commands you are
-accustomed to. In fact,&tde; puts command line power at your fingertips,
-in perhaps some surprising places.
-</para>
-
-<para>
-&tde; provides a very sophisticated command line window called
-&konsole;. Choose <menuchoice><guimenu>TDE menu</guimenu>
-<guisubmenu>System</guisubmenu>
-<guimenuitem>Konsole</guimenuitem></menuchoice> to start it. This might
-be something you want on your panel.
-</para>
-
-<para>
-Sometimes, you only want to enter one command on the command line. In
-these cases, you do not need a full-blown terminal. Just press
-<keycombo>&Alt;<keycap>F2</keycap></keycombo> and you get a
-small command line where you can enter one command. The command line
-window will disappear afterwards, but it remembers your command.
-</para>
-
-<para>
-When you pop up this window (that is called
-<application>minicli</application>) and press the <keycap>Up
-arrow</keycap>, you can browse through all the commands you have
-previously entered. Also, you can enter &URL;s in
-<application>minicli</application> to open a &konqueror; window with
-the specified &URL;.
-</para>
-
-<para>
-&konqueror; and the text editor &kate; can both display terminal windows,
-which behave just like &konsole;. In &konqueror;, you can turn this
-on with the menu choice
-<menuchoice><guimenu>Window</guimenu><guimenuitem>Show Terminal
-Emulator</guimenuitem></menuchoice>. The embedded terminal will display
-at the bottom of your &konqueror; window, and the really clever part
-is that it will follow your clicks in the file manager view, changing
-folder as you do. In &kate; you can display a terminal with the
-menu choice <menuchoice><guimenu>Settings</guimenu><guimenuitem>Show
-Console</guimenuitem></menuchoice>.
-</para>
-
-<tip>
-<para>
-To display a &UNIX; man page, enter
-<userinput><command>man:</command><replaceable>command</replaceable></userinput>
-in <application>minicli</application>, where <replaceable>command</replaceable>
-is the name of a &UNIX; command.
-</para>
-</tip>
-
-<tip>
-<para>
-To search for a word or words on the Google search engine, you can try entering
-<userinput><command>gg:</command><replaceable>word or
-words</replaceable></userinput>. There are a whole lot more of these
-shortcut commands, and you can even add your own!  Take a look in
-&kcontrolcenter;, in the tab <menuchoice><guilabel>Web Browsing</guilabel>
-	<guilabel>Enhanced Browsing</guilabel></menuchoice>.
-</para>
-</tip>
-
-<para>
-Finally, there's a way to have your command line always available, no
-matter what you're doing - add one to your &kicker; panel!
-</para>
-
-<para>Simply &RMB; click on an empty space in the panel and choose
-<menuchoice><guilabel>Add Applet to Panel...</guilabel></menuchoice>. In the dialog that appears,
-scroll down until you see the <guilabel>Run Command</guilabel> list item. Select
-it with the &LMB; and click <guilabel>Add to Panel</guilabel>. This will embed a mini-cli
-directly into your panel, complete with command history.</para>
-
-<para>
-In conclusion, the command line is never far from view when using &tde;.
-</para>
-
-</sect1>
-</chapter>
-
-<chapter id="working-with-windows">
-<title>Working with Windows</title>
-
-<para>
-If you have not already done so, start an application using the <link
-linkend="starter">&kmenu;</link>; for example, <guimenuitem>Find Files</guimenuitem>.
-</para>
-
-<sect1 id="window-what-now">
-<title>A window! What now?</title>
-
-<para>
-Usually people work <emphasis>inside</emphasis> windows, but
-sometimes you might want to manipulate windows. Here's a quick overview
-of some of the most common window related functions:
-</para>
-
-<variablelist>
-<varlistentry>
-<term>Move a window</term>
-<listitem>
-<para>
-Drag the window's title bar, or hold the &Alt; key down
-and drag anywhere in the window.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Resize a window:</term>
-<listitem>
-<para>
-Drag the window's border, or hold the &Alt; key down and drag with the
-&RMB; anywhere in the window.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Maximize a window</term>
-<listitem>
-<para>
-Click the maximize button in the titlebar (in the default decoration it
-is the button with a square, next to the X, located on the far right side
-of the titlebar) to make the window fill the screen. If the window is
-already maximized, shrink the window using the same button, although the
-image will be a double square.
-Clicking with the &MMB; maximizes the window vertically, and with
-the &RMB;, horizontally.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Iconify a window</term>
-<listitem>
-<para>
-Click the <guilabel>Minimize</guilabel> button in the titlebar (next to <guilabel>Maximize</guilabel>)
-to hide the window. Restore it by clicking on the window's icon in the
-taskbar.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term>Switch between windows</term>
-<listitem>
-<para>
-Aside from the usual mouse click to switch to another window,
-you can use <keycombo action="simul">&Alt;
-<keycap>Tab</keycap></keycombo> to switch windows. See below for more
-techniques.
-</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<sect2>
-<title>Titlebar buttons</title>
-
-<para>
-&tde; windows have some standard buttons on their titlebars that
-provide fast access to some common operations. The default button
-layout looks like this:
-</para>
-
-<itemizedlist>
-<title>On the left side:</title>
-<listitem>
-<para>
-A <guilabel>Menu</guilabel> button. This usually shows a mini icon for the application. Click
-on it to get a window operations menu. Shortcut: <keycombo
-action="simul">&Alt;<keycap>F3</keycap></keycombo> opens the window
-menu.
-</para>
-</listitem>
-<listitem>
-<para>A <guilabel>sticky</guilabel> button. This button will look like a tumb tack or pin.
-</para>
-</listitem>
-
-</itemizedlist>
-
-<itemizedlist>
-<title>On the right side:</title>
-<listitem>
-<para>
-A <guilabel>Minimize</guilabel> button.
-</para>
-</listitem>
-
-<listitem>
-<para>
-A <guilabel>Maximize</guilabel> button.
-</para>
-</listitem>
-
-<listitem>
-<para>
-A <guilabel>Close</guilabel> button. This closes the window. Shortcut: <keycombo
-action="simul">&Alt;<keycap>F4</keycap></keycombo>.
-</para>
-</listitem>
-</itemizedlist>
-
-</sect2>
-
-<sect2>
-<title>Switching between windows</title>
-
-<para>
-Now that we know how to deal with windows, we encourage you to open
-some other windows using the panel, since we will now discuss how to
-switch between different windows. Since this is such a common
-activity, &tde; offers several ways to do it; pick your favorite!
-</para>
-
-<para>
-Many graphical user interface systems require users to click the mouse in a window
-to begin using it. This is &tde;'s default behavior, termed
-<quote>Click To Focus</quote> focus policy. You can configure
-your desktop in a way that moving the mouse pointer on to a window will
-activate it. This is called <quote>Focus Follows Mouse</quote>. If you
-select this policy using the <link linkend="configure">&tde; Control
-Center</link>, the window under the mouse pointer is always the active
-one. It does not necessarily come to the front automatically, but you
-can still click on to the titlebar or the border of a window or, a
-&tde; special, you can use the &Alt; key and click the &MMB;
-anywhere on the window to raise it.
-</para>
-
-<para>
-Here are some other methods to switch windows:
-</para>
-
-<itemizedlist>
-<listitem>
-<para>
-Pick a window from the <emphasis>window list</emphasis> menu. To open
-the menu, click the &MMB; on
-an empty area of the desktop, or click the icon with several windows
-on the panel, or finally click the up arrow at the left hand end of
-the taskbar in the panel.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Hold down the &Alt; key and press <keycap>Tab</keycap> to cycle through
-the windows.
-</para>
-</listitem>
-
-<listitem>
-<para>
-Use the taskbar (next section).
-</para>
-</listitem>
-</itemizedlist>
-
-</sect2>
-</sect1>
-
-<sect1 id="using-taskbar">
-<title>Using the Taskbar</title>
-
-<para>
-The <interface>taskbar</interface> displays a list of small icons, one
-for each window on the desktop. In the default &tde; setup the taskbar
-is located inside the panel, but can also be located at the top or
-the bottom of the screen.</para>
-
-<para>
-The taskbar is powerful. In the default configuration, if you
-have more than one window from the same application open, they will be
-<quote>grouped</quote>, so that you see one icon per application in
-the taskbar.</para>
-
-<para>A simple &LMB;
-click on the taskbar button will pop up a list of the open windows for
-that application and you can choose the window you want to
-use. Choosing one of these entries with the
-<mousebutton>left</mousebutton> will bring you to the selected
-window immediately. Click on a taskbar entry with the
-<mousebutton>right</mousebutton> and you will see a menu allowing you
-to operate on all the windows grouped under that icon, or each window
-individually.</para>
-
-<para>
-You can choose to see all the windows on all the desktops in your
-taskbar, regardless of which desktop you are currently viewing, or to only
-see the icons for the desktop you are viewing. You can choose
-to ungroup the icons, so each open window will have its own icon
-in the taskbar. There are many more options available simply by
-right clicking on the taskbar handle (the small textured bar at the
-left hand side) and choosing <guimenuitem>Configure Taskbar...</guimenuitem>.
-</para>
-
-<para>
-The icons on the taskbar resize themselves to make room for
-applications, so you can fit many more applications than you might
-think. Making the panel wider will let the taskbar icons take on a row
-and column layout, but they will still resize to fit more icons.
-</para>
-
-</sect1>
-
-<sect1 id="using-v-desktops">
-<title>Using Virtual Desktops</title>
-
-<para>
-Now, what was that <guilabel>Sticky</guilabel> button?
-</para>
-
-<para>
-Perhaps you have more windows open than space on your
-desktop. In this case you have three possibilities:
-</para>
-
-<orderedlist>
-<listitem>
-<para>
-Leave all windows open (cluttered desktop)
-</para>
-</listitem>
-
-<listitem>
-<para>
-Iconify those windows that you do not need at present and use
-the taskbar or <keycombo action="simul">&Alt;
-<keycap>Tab</keycap></keycombo> to switch between them
-(still a bit confusing and much work!)
-</para>
-</listitem>
-
-<listitem>
-<para>
-Recommended: Use virtual desktops.
-</para>
-</listitem>
-</orderedlist>
-
-<para>
-The third option is the way to go! &tde; can handle several different desktops,
-each with its own set of application windows. The default configuration provides four
-desktops. You can switch between the virtual desktops easily with a
-click on one of the desktop buttons on the panel. Also <keycombo
-action="simul">&Ctrl;<keycap>F1...F4</keycap></keycombo> will send you
-to the corresponding desktop immediately, or <keycombo
-action="simul">&Ctrl; <keycap>Tab</keycap></keycombo> will cycle through
-the desktops.
-</para>
-
-<para>
-Virtual desktops are nice. Yet sometimes you want a window to be
-present on <emphasis>every</emphasis> desktop. This could be, for example,
-a small chat window, an alarm clock or whatever. In this case you can
-use the above mentioned <quote>sticky</quote> button that will pin the
-window on the background so that it will appear on every virtual
-desktop.
-</para>
-
-<para>
-The sticky button can also be used to move a window from one virtual
-desktop to another one: push the sticky pin on the window, switch to a
-different desktop, and release the pin by pushing it again. You can
-achieve the same result by using the context popup menu of the
-window's entry in the taskbar (menu item <guimenuitem>To Current
-Desktop</guimenuitem>) or the <guimenuitem>To Desktop</guimenuitem>
-option on the window operations menu.
-</para>
-
-</sect1>
-</chapter>
-
-<chapter id="managing-your-files">
-<title>Managing your files</title>
-
-<!-- NB Deliberate use of 'directory' rather than 'folder', since we're talking -->
-<!-- about folders on disk -->
-<para>
-A common metaphor of graphical desktops is the use of folders to
-represent folders on your hard disk. Folders contain files and
-other folders. A &tde; application called &konqueror;, the Trinity File
-Manager, uses this metaphor to help you manage your files.
-</para>
-
-<sect1 id="using-konqueror">
-<title>Using &konqueror;</title>
-
-<para>
-The first time you start &konqueror;, a window with lots of icons in it
-appears. This is a &konqueror; window displaying the files in your
-home folder (the area where your personal files are stored). The
-pathname of the folder is displayed under the window's tool bar. If
-you do not see such a window now, click the icon on the panel that
-looks like a folder with a picture of a house.
-</para>
-
-<para>
-To open a file or folder, <quote>double-click</quote> it with the &LMB;.
-You can also choose
-<menuchoice><guimenu>Window</guimenu><guimenuitem>Show
-Navigation Panel</guimenuitem></menuchoice> from the menu to display the folder
-hierarchy for more direct navigation. Or you can edit the path
-displayed under the toolbar to get to a specific folder quickly.
-</para>
-
-<sect2>
-<title>Opening Files</title>
-
-<para>
-&tde; comes with a set of applications to view and edit files of many
-common types, and when you select a file containing, say, a document
-or image, &konqueror; will start an appropriate application to
-display the file. If it does not know what application to start to open
-a file you selected, &konqueror; will prompt you for the name of the
-application to run, and when you have chosen, &konqueror; will offer
-to remember your choice for the next time you open a file of that type.
-</para>
-
-<note>
-<para>
-&konqueror; uses MIME types to associate
-files with applications.
-</para>
-</note>
-
-</sect2>
-
-<sect2>
-<title>Dragging and Dropping Icons</title>
-
-<para>
-To copy or move a file, simply drag its icon to the desktop, to
-another &konqueror; window, or to a folder icon. When you release the
-button, &konqueror; displays a menu to allow you to choose to copy,
-move, or create a link to the file.
-</para>
-
-<note>
-<para>
-Note that if you choose to create a link, &tde; creates a &UNIX;
-symbolic link (not a hard link), so if you move or delete the original
-file, the link will be broken.
-</para>
-</note>
-
-<para>
-Most &tde; applications also support drag and drop operations: you can
-drag an icon on to a window of a running application, or on to an icon of
-an application that is not started, to have the application open the
-file. Try it!
-</para>
-
-</sect2>
-
-<sect2>
-<title>Setting File Properties</title>
-
-<para>
-To change file properties, such as its name and permissions, &RMB;
-click the icon and choose <guimenuitem>Properties</guimenuitem> from
-the menu.
-</para>
-
-</sect2>
-</sect1>
-
-<sect1 id="archives-and-networks">
-<title>Working with Archives and Networks</title>
-
-<para>
-Once upon a time users needed special software to access files on the
-Internet. Not any more!
-</para>
-
-<para>
-&tde; supports a technology called <quote>Network Transparent
-Access</quote> (<acronym>NTA</acronym>), which allows you to work with
-files on the other side of the world as easily as those on your local
-hard disk.</para>
-
-<para>
-For example, to access files on an &FTP; server, just choose
-<menuchoice><guimenu>Location</guimenu><guimenuitem>Open
-Location</guimenuitem></menuchoice> from a &konqueror; menu, and enter
-the <acronym>URL</acronym> of an &FTP; server. You can drag and drop
-files to and from the folders on the server just as if they were on
-your local disk. You'll even be able to open files on the &FTP; server
-without having to manually copy them to your local disk (&tde; does it for you
-when necessary).
-</para>
-
-<note>
-<para>
-Note that &konqueror; uses anonymous &FTP; access, which might restrict
-your access to files on the &FTP; server. If you have an account on
-the server, you can supply your user <abbrev>ID</abbrev> as part of
-the <acronym>URL</acronym>, like this:
-<userinput><command>ftp://</command><parameter>userid</parameter>@<parameter>server</parameter>/<parameter>folder</parameter></userinput>
-</para>
-
-<para>
-&konqueror; will prompt you for your password, and if the login
-succeeds, you will have full access to your files on the server.
-</para>
-</note>
-
-<para>
-If you are used to the
-<trademark><application>WinZip</application></trademark> utility on
-&Microsoft; &Windows;, then you will be happy to know that &tde; can
-look into archive files too. It treats such archives just like a
-normal folder, and you can browse into the archive, open files, &etc; In
-general, accessing files on the Internet and in archives should look
-and feel just like accessing files on your local disk, except for
-delays imposed by the network and extracting the archive.
-</para>
-</sect1>
-
-<sect1 id="using-templates">
-<title>Using Templates to Access Applications and Devices</title>
-
-<para>
-In &tde; it's easy to put icons on the panel or the desktop to access
-your applications. It's just as easy to add icons to access other
-items of interest. &tde; has templates for shortcuts to:
-</para>
-
-<itemizedlist>
-<listitem>
-<para>
-Applications
-</para>
-</listitem>
-<listitem>
-<para>
-Printers
-</para>
-</listitem>
-<listitem>
-<para>
-Mountable Devices (&eg; floppy drives)
-</para>
-</listitem>
-<listitem>
-<para>
-Internet resources (&eg; <acronym>WWW</acronym> documents, &FTP;
-folders)
-</para>
-</listitem>
-<listitem>
-<para>
-Documents for some of &tde;'s &koffice; applications.
-</para>
-</listitem>
-</itemizedlist>
-
-<para>
-You can add any of these items to the desktop by &RMB; clicking where
-you want the icon, and choosing <guisubmenu>Create New</guisubmenu>
-and selecting the item you want to link to.
-</para>
-
-<para>
-Nearly every item in the &kmenu;, on the desktop, and on
-the panel refers to a <literal role="extension">.desktop</literal>
-file on disk. The <literal role="extension">.desktop</literal> file
-specifies what icon to display, as well as specific information about
-what the icon represents (an application, device, or
-<acronym>URL</acronym>). You can drag any <literal
-role="extension">.desktop</literal> file to the panel to create a
-quick-launch button.
-</para>
-
-<!--
-<sect2>
-<title>Setting up printers</title>
-
-<para>
-You can create icons for your printers so you can print a file by
-dragging it to a printer icon. Here's how:
-</para>
-
-<procedure>
-<step><para>Open the Templates folder located on the desktop.</para></step>
-<step><para>Drag the Program icon in the folder to the desktop. Choose
-<guimenuitem>Copy</guimenuitem> from the menu that appears when you drop the
-icon.</para></step>
-<step><para><mousebutton>Right</mousebutton> click the new icon, and choose
-<guimenuitem>Properties</guimenuitem> from the context menu.</para></step>
-<step><para>On the <guilabel>General</guilabel> tab, change the name to
-<filename>Printer.kdelnk</filename>.</para></step>
-<step><para>On the <guilabel>Execute</guilabel> tab, enter the following in the
-first <guilabel>Execute</guilabel> field:</para>
-<screen><command>lpr <option>%f</option></command></screen>
-<note><para>This example presumes that you print using the <command>lpr</command>
-command. If you use a different command, enter the one you
-use.</para></note></step>
-<step><para>Still in the <guilabel>Execute</guilabel> tab, click the icon that
-looks like a <guiicon>cog</guiicon>, and select the <guiicon>Printer</guiicon> icon from the list that appears.</para></step>
-</procedure>
-
-<para>Now you should be able to drag a file to the Printer icon and have it
-printed on your default printer.</para>
-</sect2>
-
--->
-
-<sect2>
-<title>Mounting devices</title>
-
-<para>
-&UNIX; systems provide access to storage devices other than the primary
-<hardware>hard disk</hardware> through a process called
-<emphasis>mounting</emphasis>. &tde; uses <literal
-role="extension">.desktop</literal> files to allow you to easily
-mount, unmount, and access files on secondary storage devices such as
-<hardware>floppy</hardware> drives and &cdrom; drives.
-</para>
-
-<para>
-As an example, here are the steps needed to create an icon to access
-files on a floppy disk:
-</para>
-
-<note>
-<para>
-Many &UNIX; systems require you to be logged in as <systemitem
-class="username">root</systemitem> to mount and unmount devices.
-</para>
-</note>
-
-<procedure>
-<step>
-<para><mousebutton>Right</mousebutton> click on the desktop and choose
-<menuchoice><guisubmenu>Create
-New</guisubmenu><guisubmenu>Device</guisubmenu>
-<guimenuitem>Floppy Device...</guimenuitem></menuchoice>.
-</para>
-</step>
-<step>
-<para>
-On the <guilabel>General</guilabel> tab of the resulting dialog, change
-the name to whatever you like, in the text box at the top.
-</para>
-</step>
-
-<step>
-<para>
-On the <guilabel>Device</guilabel> tab, enter <filename
-class="devicefile">/dev/fd0</filename> (or the path to the floppy device
-as it is named on your system) as the <guilabel>Device</guilabel>.
-</para>
-</step>
-<step>
-<para>
-You can add a <guilabel>Mount Point</guilabel> here too. This should be
-an existing folder, but empty. Common mount points are <filename
-class="directory">/mnt/floppy</filename> or <filename
-class="directory">/floppy</filename>, but you can just as easily have floppy
-disks mounted on <filename class="directory">~/mydisk</filename> if you
-want.
-</para>
-</step>
-<step>
-<para>
-Click the <guilabel>Unmounted Icon</guilabel> and select the picture
-of a floppy disk without the green light.
-</para>
-</step>
-<step>
-<para>
-Once you're happy with your choices, choose <guibutton>OK</guibutton>
-and you are finished!
-</para>
-</step>
-</procedure>
-
-<para>
-Now, place a properly formatted floppy in the drive and click the
-<guiicon>Floppy</guiicon> icon to have &tde; mount the floppy drive and display
-the files on the disk. Before removing the disk from the drive, &RMB;
-click the <guiicon>Floppy</guiicon> icon and choose
-<guimenuitem>Unmount</guimenuitem> from the menu.
-</para>
-
-</sect2>
-</sect1>
-</chapter>
-
-<chapter id="configure">
-<title>Configuring your desktop</title>
-
-<para>
-If you do not like something about the way the desktop looks or
-operates, you can probably change it. &tde; is very configurable and you
-can change almost every aspect of the appearance and the behavior of
-your desktop. Unlike many other &UNIX; desktop environments, you do not
-have to edit cryptic configuration files either (but you can if you
-really want to!)  You use the &kcontrolcenter;, a special program for
-configuring your desktop.
-</para>
-
-<sect1 id="using-kde-control">
-<title>Using the <application>&tde; Control Center</application></title>
-
-<para>
-Launch the &kcontrolcenter; from the <link linkend="starter">&kmenu;</link>.
-A window with two panes appears, displaying a list of
-modules in the left pane.
-</para>
-
-<para>
-Open a module by clicking its name; a list of submodules will
-appear. Then, click one of the submodule category names to edit its
-configuration in the right pane.
-</para>
-
-<para>
-Changing the configuration is fairly straightforward. A help button is
-available on each configuration panel to explain settings that are not
-obvious. Each panel has buttons labeled <guibutton>Help</guibutton>,
-<guibutton>Use Defaults</guibutton>, <guibutton>Apply</guibutton>, and
-<guibutton>Reset</guibutton>, which work as follows:
-</para>
-
-<variablelist>
-<varlistentry>
-<term><guibutton>Help</guibutton></term>
-<listitem>
-<para>
-Displays a short help text in the left hand pane, including a link to a
-longer manual for the module in question.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><guibutton>Use Defaults</guibutton></term>
-<listitem>
-<para>
-Sets all the options in the current module back to the default at the
-time &tde; was installed.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><guibutton>Apply</guibutton></term>
-<listitem>
-<para>
-Applies the current settings in the currently open module.
-</para>
-</listitem>
-</varlistentry>
-
-<varlistentry>
-<term><guibutton>Reset</guibutton></term>
-<listitem>
-<para>
-Resets the options to the state they were in when you opened the module.
-If you have already used the <guibutton>Apply</guibutton> button, then
-this button will reset the options to the state they were in when you
-pressed <guibutton>Apply</guibutton>.
-</para>
-</listitem>
-</varlistentry>
-</variablelist>
-
-<note>
-<para>
-If you make changes on one configuration panel and move to a different module
-without clicking <guibutton>OK</guibutton> or <guibutton>Apply</guibutton>
-first, &kcontrolcenter; will prompt you to ask whether your changes should be applied
-first.
-</para>
-</note>
-
-</sect1>
-
-</chapter>
-
-<chapter id="logging-out">
-<title>Logging out</title>
-
-<para>
-We sincerely hope that using &tde; gives you so much fun and
-pleasure that you never want to log out. But if you do, simply choose
-<menuchoice><guimenu>TDE menu</guimenu>
-<guimenuitem>Logout</guimenuitem></menuchoice>.
-</para>
-
-<para>
-There also is an applet logout button that can be added directly to the panel, which looks like a
-small power button. Or you can press <keycombo action="simul">&Ctrl;
-&Alt; <keycap>Delete</keycap></keycombo> to log out.
-</para>
-
-<sect1 id="session-management">
-<title>Session Management</title>
-
-<para>
-When you log out, &tde; can remember which applications you had open, as
-well as where all the windows were located, so that it can open them
-for you the next time you log in. This feature is termed
-<emphasis>Session Management</emphasis>. &tde;-aware applications will
-restore themselves to the state they were in when you logged out. For
-example, &kate; remembers which files you were editing.</para>
-
-<para>
-Non-&tde; applications might not memorize their state on logout, and
-&tde; will warn you to make sure that you have saved any important
-data in them when you start to log out.
-</para>
-
-<para>
-To illustrate session management, choose <menuchoice>
-<guimenu>TDE menu</guimenu><guisubmenu>Editors</guisubmenu>
-<guimenuitem>Kate</guimenuitem> </menuchoice> to start &kate;. Open
-a text document to edit. Now log out and back in. You will observe
-that &kate; will be restored to the exact same position on the screen,
-including the correct virtual desktop, and the document we left open in
-&kate; before we logged out is opened again automatically. &kate;
-will even remember whether you had unsaved changes to your document
-before you logged out and will save them to the file you were working
-on if you choose <guimenuitem>Save</guimenuitem> from the
-<guimenu>File</guimenu> menu.
-</para>
-
-</sect1>
-</chapter>
-
-<chapter id="kde-an-exciting-journey">
-<title>&tde;, an exciting Journey</title>
-
-<para>
-We hope you enjoyed this brief tour of the Trinity Desktop Environment and
-that this unique desktop environment will help you get your work done
-faster and more comfortably than ever.
-</para>
-
-<para>
-Please remember that the &tde; project is not a commercial venture,
-but rather a project run by volunteers from around the world. We
-would like to invite you to join the &tde; project and become part of
-this unique network of people. If you are a programmer you might
-consider helping us write or improve &tde; applications. If you are an artist or
-have experience with graphic design, consider creating icons sets,
-color schemes, sound schemes and logos for &tde;. If you enjoy
-writing we would love for you to join our documentation team.
-</para>
-
-<para>
-As you can see there are many ways that you can help. You are
-invited to join this world-wide network of people dedicated
-to making &tde; the best desktop environment for any computer. Please
-visit <ulink url="http://www.trinitydesktop.org">www.trinitydesktop.org</ulink> for more
-information.
-</para>
-
-<para>
-<emphasis>Welcome aboard on this exciting journey, </emphasis>
-</para>
-<para>
-<literal>Your &tde; Team</literal>
-</para>
-</chapter>
-
-<!--
-2004-08-27
-Removed because it probably should not be here, and it will only end up
-getting out-of-date if it is (Phil)
-<chapter id="advanced-topics">
-<title>Advanced Topics</title>
-
-<sect1 id="mime">
-<title>&MIME; Types</title>
-
-<para>
-&tde; comes with a number of &MIME; types predefined, but you can add
-your own &MIME; types by choosing
-<menuchoice><guimenu>Settings</guimenu>
-<guisubmenu>Configure Konqueror...</guisubmenu>
-</menuchoice> and then <guilabel>File
-Associations</guilabel> in a &konqueror; window.
-</para>
-
-<para>
-&tde;'s handling of &MIME; types is very powerful, and very
-configurable. On the one hand, you can set a default action to be
-performed when you click on a file in &konqueror;. Just as usefully,
-you can add many more actions, which are then available with a &RMB;
-click menu on the file in question.
-</para>
-
-
-<procedure>
-<title>To link a certain file type with a particular application:</title>
-<step>
-<para>
-Make sure the application you want to start this file type has an
-entry in the &kmenu;.
-</para>
-</step>
-
-<step>
-<para>In &konqueror; find or make a file with the extension you wish to
-link.
-</para>
-</step>
-
-<step>
-<para>
-<mousebutton>Right</mousebutton> click on the file, and choose
-<guimenuitem>Edit File Type</guimenuitem> from the context menu, or
-choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Edit File
-Type</guimenuitem></menuchoice> in &konqueror;'s menu bar.
-</para>
-</step>
-
-<step> <para> Add file masks for the application by clicking the
-<guibutton>Add</guibutton> button, and entering the file pattern you
-want. Remember that &UNIX; is case sensitive, so you might need to add
-variations - <userinput>*.mp3</userinput> might need
-<userinput>*.MP3</userinput> added as well, for example. Add as many
-extensions as you like in this way.</para> </step>
-
-<step>
-<para>
-Add a description if you like. This is optional.
-</para>
-</step>
-
-<step>
-<para>In the section labeled <guilabel>Application Preference
-Order</guilabel>, press the <guibutton>Add</guibutton> button. A
-miniature copy of the &kmenu; will
-open, where you can choose the application you want files of this type
-to be opened with.
-</para>
-</step>
-
-<step>
-<para>
-Sometimes, you might want to use a different application to open this
-file type. For example, you might like to use &kate; to open text
-files you wish to edit, and &kedit; for text files that you just want
-to take a quick peek into. You can add more applications in the same
-way as you did in the last step, and you can change the preferred
-order using the <guibutton>Move Up</guibutton> and <guibutton>Move
-Down</guibutton> buttons.
-</para>
-</step>
-
-<step>
-<para>
-If you're satisfied with your choices, you can click the
-<guibutton>Apply</guibutton> button to save your changes without
-closing the dialog box. This gives you the opportunity to test in the
-<application>Konqueror</application> window that your file association
-is correct. You can choose <guibutton>OK</guibutton> to save your
-changes and close the dialog box, or <guibutton>Cancel</guibutton> if
-you have changed your mind and just want to close the dialog box.
-</para>
-</step>
-</procedure>
-
-<para>
-Be sure to try your new association by opening a folder containing
-a file of the type you just selected. Click on the file, and the
-program needed to edit it should start.
-</para>
-
-<note>
-<para>
-&MIME; types are a way of describing the contents of files. You might
-be used to using file extensions for that purpose, and you might know
-that on &UNIX; systems the file extension often bears little or no
-relation to the contents of the file. On the other hand, it might be
-vital - for example, some implementations of <command>gunzip</command>
-will not operate on files that are not named <literal
-role="extension">.gz</literal>.
-</para>
-
-<para>
-&MIME; types naturally make use of filename patterns, but not
-necessarily the extensions - you can set up any filename pattern you
-like. For example, if you always want to open any files relating to a
-particular client with &kate;,  and you make a habit of naming the files
-with the client's name at the beginning so that they naturally group in
-the &konqueror; window, then you can set up a filename pattern that
-matches <literal>^<replaceable>clientname</replaceable>*</literal>.
-Then any files that have <replaceable>clientname</replaceable> at the
-beginning (the <token>^</token> character means <quote>starts with...</quote>) and
-without any regard to the rest of the filename.
-</para>
-</note>
-
-</sect1>
-
-</chapter>
--->
-<chapter id="credits">
-<title>Credits</title>
-<sect1 id="authors">
-<title>Authors</title>
-
-<itemizedlist>
-<listitem><para>Matthias Ettrich
-<email>[email protected]</email></para></listitem>
-<listitem><para>Kalle Dahlheimer <email>[email protected]</email></para></listitem>
-<listitem><para>Torben Weiss <email>[email protected]</email></para></listitem>
-<listitem><para>Bernd Wuebben <email>[email protected]</email></para></listitem>
-<listitem><para>Stephen Schaub <email>[email protected]</email> -
-Editor</para></listitem>
-<listitem><para>Robert Williams <email>[email protected]</email> -
-Editor</para></listitem>
-<listitem><para>Lauri Watts <email>[email protected]</email></para></listitem>
-</itemizedlist>
-
-<!-- TRANS:CREDIT_FOR_TRANSLATORS -->
-
-&underFDL;
-
-</sect1>
-</chapter>
-</book>