diff options
Diffstat (limited to 'doc/kcontrol')
54 files changed, 1438 insertions, 0 deletions
diff --git a/doc/kcontrol/cdinfo/CMakeLists.txt b/doc/kcontrol/cdinfo/CMakeLists.txt new file mode 100644 index 000000000..e4cfd45b9 --- /dev/null +++ b/doc/kcontrol/cdinfo/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/cdinfo ) diff --git a/doc/kcontrol/cdinfo/Makefile.am b/doc/kcontrol/cdinfo/Makefile.am new file mode 100644 index 000000000..318cb35a6 --- /dev/null +++ b/doc/kcontrol/cdinfo/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/cdinfo diff --git a/doc/kcontrol/cdinfo/index.docbook b/doc/kcontrol/cdinfo/index.docbook new file mode 100644 index 000000000..6048e5873 --- /dev/null +++ b/doc/kcontrol/cdinfo/index.docbook @@ -0,0 +1,51 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>CD-ROM Information/Capabilities</title> +<articleinfo> + +<authorgroup> +<author> +<firstname>Jahshan</firstname> +<surname>Bhatti</surname> +<affiliation><address><email>[email protected]</email></address></affiliation> +</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2006-06-13</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>cd-rom</keyword> +<keyword>capabilities information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>CD-ROM Information/Capabilities</title> + +<para> +This page displays information about the attached CD-ROM drives and their capabilites, +</para> + +<para> +On &Linux;, this information is read from <filename +class="devicefile">/proc/sys/dev/cdrom/info</filename>, which are only available if +the <filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel. +</para> + +<para> +The user cannot modify any settings on this page. +</para> + +</sect1> +</article> diff --git a/doc/kcontrol/devices/CMakeLists.txt b/doc/kcontrol/devices/CMakeLists.txt new file mode 100644 index 000000000..5a747385e --- /dev/null +++ b/doc/kcontrol/devices/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/devices ) diff --git a/doc/kcontrol/devices/Makefile.am b/doc/kcontrol/devices/Makefile.am new file mode 100644 index 000000000..f2449c0e0 --- /dev/null +++ b/doc/kcontrol/devices/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/devices diff --git a/doc/kcontrol/devices/index.docbook b/doc/kcontrol/devices/index.docbook new file mode 100644 index 000000000..43eac4de9 --- /dev/null +++ b/doc/kcontrol/devices/index.docbook @@ -0,0 +1,60 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Device Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>device</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>Device Information</title> + +<para> +This page displays information about the available devices, +</para> + +<note> +<para> +The exact information displayed is system-dependent. On some systems, +device information cannot be displayed yet. +</para> +</note> + +<para> +On &Linux;, this information is read from <filename +class="devicefile">/proc/devices</filename> and <filename +class="devicefile">/proc/misc</filename>, which are only available if +the <filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel. Devices are listed by group (Character, Block, +or Miscellaneous). The device major number is listed, followed by an +identifying label. +</para> + +<para> +The user cannot modify any settings on this page. +</para> + +</sect1> +</article> diff --git a/doc/kcontrol/dma/CMakeLists.txt b/doc/kcontrol/dma/CMakeLists.txt new file mode 100644 index 000000000..2c3752d1c --- /dev/null +++ b/doc/kcontrol/dma/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/dma ) diff --git a/doc/kcontrol/dma/Makefile.am b/doc/kcontrol/dma/Makefile.am new file mode 100644 index 000000000..f8fd8f8e9 --- /dev/null +++ b/doc/kcontrol/dma/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/dma diff --git a/doc/kcontrol/dma/index.docbook b/doc/kcontrol/dma/index.docbook new file mode 100644 index 000000000..415666095 --- /dev/null +++ b/doc/kcontrol/dma/index.docbook @@ -0,0 +1,64 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>DMA</acronym> Channel Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>DMA</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title><acronym>DMA</acronym> Channel Information</title> + +<para> This page displays information about the <acronym>DMA</acronym> +(Direct Memory Access) Channels. A <acronym>DMA</acronym> channel is a +direct connection that allows devices to transfer data to and from +memory without going through the processor. Typically, i386-architecture +systems (<acronym>PC</acronym>'s) have eight <acronym>DMA</acronym> +channels (0-7).</para> + +<note> <para> The exact information displayed is system-dependent. On +some systems, <acronym>DMA</acronym> Channel information cannot be +displayed yet.</para> </note> + +<para> On &Linux;, this information is read from <filename +class="devicefile">/proc/dma</filename>, which is only available if the +<filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel.</para> + +<para> A list of all currently-registered (<acronym>ISA</acronym> bus) +<acronym>DMA</acronym> channels that are in use is shown. The first +column shows the <acronym>DMA</acronym> channel, and the second column +shows the device which uses that channel.</para> + +<para> +Unused <acronym>DMA</acronym> channels are not listed. +</para> + +<para> +The user cannot modify any settings on this page. +</para> + +</sect1> +</article> diff --git a/doc/kcontrol/interrupts/CMakeLists.txt b/doc/kcontrol/interrupts/CMakeLists.txt new file mode 100644 index 000000000..67690437f --- /dev/null +++ b/doc/kcontrol/interrupts/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/interrupts ) diff --git a/doc/kcontrol/interrupts/Makefile.am b/doc/kcontrol/interrupts/Makefile.am new file mode 100644 index 000000000..5d81a10cd --- /dev/null +++ b/doc/kcontrol/interrupts/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/interrupts diff --git a/doc/kcontrol/interrupts/index.docbook b/doc/kcontrol/interrupts/index.docbook new file mode 100644 index 000000000..b29611202 --- /dev/null +++ b/doc/kcontrol/interrupts/index.docbook @@ -0,0 +1,70 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Interrupt Request (<abbrev>IRQ</abbrev>) Lines</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>IRQ</keyword> +<keyword>interrupts</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>Interrupt Request (<abbrev>IRQ</abbrev>) Lines in Use</title> + +<para>This page displays information about the Interrupt Request +Lines in use, and the devices that use them.</para> + +<para>An <acronym>IRQ</acronym> is a hardware line used in a +<acronym>PC</acronym> by (<acronym>ISA</acronym> bus) devices like +keyboards, modems, sound cards, &etc;, to send interrupt signals to the +processor to tell it that the device is ready to send or accept data. +Unfortunately, there are only sixteen <acronym>IRQ</acronym>'s (0-15) +available in the i386 (<acronym>PC</acronym>) architecture for sharing among +the various <acronym>ISA</acronym> devices.</para> + +<para>Many hardware problems are the result of <acronym>IRQ</acronym> +conflicts, when two devices try to use the same <acronym>IRQ</acronym>, or +software is misconfigured to use a different <acronym>IRQ</acronym> from the +one a device is actually configured for.</para> + +<note><para>The exact information displayed is system-dependent. On some +systems, <acronym>IRQ</acronym> information cannot be displayed + yet.</para></note> + +<para>On &Linux;, this information is read from +<filename class="directory">/proc/interrupts</filename>, which is only +available if the <filename class="directory">/proc</filename> +pseudo-filesystem is compiled into the kernel.</para> + +<para>The first column, is the <acronym>IRQ</acronym> number. The second +column, is the number of interrupts that have been received since the last +reboot. The third column shows the type of interrupt. The fourth, +identifies the device assigned to that interrupt.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> + diff --git a/doc/kcontrol/ioports/CMakeLists.txt b/doc/kcontrol/ioports/CMakeLists.txt new file mode 100644 index 000000000..c8ca4ced6 --- /dev/null +++ b/doc/kcontrol/ioports/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/ioports ) diff --git a/doc/kcontrol/ioports/Makefile.am b/doc/kcontrol/ioports/Makefile.am new file mode 100644 index 000000000..e5f86f7b3 --- /dev/null +++ b/doc/kcontrol/ioports/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/ioports diff --git a/doc/kcontrol/ioports/index.docbook b/doc/kcontrol/ioports/index.docbook new file mode 100644 index 000000000..65bcb1f1e --- /dev/null +++ b/doc/kcontrol/ioports/index.docbook @@ -0,0 +1,64 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>I/O Port</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> + +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>ioports</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>Input/Output Port Information</title> + +<para>This page displays information about the I/O ports.</para> + +<para>I/O Ports are memory addresses used by the processor for direct +communication with a device that has sent an +interrupt signal to the processor.</para> + +<para>The exchange of commands or data between the processor and the device +takes place through the I/O port address of the device, which is a + hexadecimal +number. No two devices can share the same I/O port. Many devices use + multiple +I/O port addresses, which are expressed as a range of hexadecimal +numbers.</para> + +<note><para>The exact information displayed is system-dependent. On some +systems, I/O port information can not yet be displayed.</para></note> + +<para>On &Linux;, this information is read from <filename +class="devicefile">/proc/ioports</filename> which is only available if +the <filename class="devicefile">/proc</filename> pseudo-filesystem is +compiled into the kernel. A list of all currently-registered I/O port +regions that are in use is shown.</para> + +<para>The first column is the I/O port (or the range of I/O ports), the +second column identifies the device that uses these I/O ports.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> +</article> diff --git a/doc/kcontrol/memory/CMakeLists.txt b/doc/kcontrol/memory/CMakeLists.txt new file mode 100644 index 000000000..7b37cffb2 --- /dev/null +++ b/doc/kcontrol/memory/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/memory ) diff --git a/doc/kcontrol/memory/Makefile.am b/doc/kcontrol/memory/Makefile.am new file mode 100644 index 000000000..c63989f33 --- /dev/null +++ b/doc/kcontrol/memory/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/memory diff --git a/doc/kcontrol/memory/index.docbook b/doc/kcontrol/memory/index.docbook new file mode 100644 index 000000000..19d10fc57 --- /dev/null +++ b/doc/kcontrol/memory/index.docbook @@ -0,0 +1,108 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Memory Information</title> +<articleinfo> + +<authorgroup> +<author>&Mike.McBride;</author> + +<!-- TRANS:ROLES_OF_TRANSLATORS --> + +</authorgroup> + +<date>2002-02-13</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>memory</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>Memory Information</title> + +<para>This module displays the current memory usage. It is updated +constantly, and can be very useful for pinpointing bottlenecks when certain +applications are executed.</para> + +<sect2 id="memory-intro"> +<title>Memory Types</title> + +<para>The first thing you must understand, is there are two types of +<quote>memory</quote>, available to the operating system and the programs +that run within it.</para> + +<para>The first type, is called physical memory. This is the memory located +within the memory chips, within your computer. This is the +<acronym>RAM</acronym> (for Random Access Memory) you bought when you +purchased your computer.</para> + +<para>The second type of memory, is called virtual or swap memory. This +block of memory, is actually space on the hard drive. The operating +system reserves a space on the hard drive for <quote>swap space</quote>. +The operating system can use this virtual memory (or swap space), if it +runs out of physical memory. The reason this is called +<quote>swap</quote> memory, is the operating system takes some data that +it doesn't think you will want for a while, and saves that to disk in +this reserved space. The operating system then loads the new data you +need right now. It has <quote>swapped</quote> the not needed data, for +the data you need right now. Virtual or swap memory is not as fast as +physical memory, so operating systems try to keep data (especially often +used data), in the physical memory.</para> + +<para>The total memory, is the combined total of physical memory and +virtual memory.</para> + +</sect2> + +<sect2 id="memory-use"> +<title>Memory Information Module</title> + +<para>This window is divided into a top and bottom section</para> + +<para>The top section shows you the total physical memory, total free + physical memory, shared memory, and buffered memory.</para> + +<para>All four values are represented as the total number of bytes, and + as the number of megabytes (1 megabyte = slightly more than 1,000,000 + bytes)</para> + +<para>The bottom section shows you three graphs: </para> + +<itemizedlist> +<listitem><para><guilabel>Total Memory</guilabel> (this is the combination of physical and virtual memory).</para></listitem> +<listitem><para><guilabel>Physical Memory</guilabel></para></listitem> +<listitem><para>Virtual memory, or <guilabel>Swap Space</guilabel>.</para></listitem> +</itemizedlist> + +<para>The green areas are free, and the red areas are used.</para> + +<tip><para>The exact values of each type of memory are not critical, and + they change regularly. When you evaluate this page, look at + trends.</para> + +<para>Does your computer have plenty of free space (green areas)? If + not, you can increase the swap size or increase the physical + memory.</para> + +<para>Also, if your computer seems sluggish: is your physical memory + full, and does the hard drive always seem to be running? This suggests + that you do not have enough physical memory, and your computer is + relying on the slower virtual memory for commonly used data. Increasing + your physical memory will improve the responsiveness of your + computer.</para></tip> + +</sect2> + +</sect1> + +</article> diff --git a/doc/kcontrol/nics/CMakeLists.txt b/doc/kcontrol/nics/CMakeLists.txt new file mode 100644 index 000000000..e30c40bf9 --- /dev/null +++ b/doc/kcontrol/nics/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/nics ) diff --git a/doc/kcontrol/nics/Makefile.am b/doc/kcontrol/nics/Makefile.am new file mode 100644 index 000000000..eb1c37098 --- /dev/null +++ b/doc/kcontrol/nics/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/nics diff --git a/doc/kcontrol/nics/index.docbook b/doc/kcontrol/nics/index.docbook new file mode 100644 index 000000000..f82552c28 --- /dev/null +++ b/doc/kcontrol/nics/index.docbook @@ -0,0 +1,45 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Network Interfaces</title> +<articleinfo> + +<authorgroup> +<author>&Lauri.Watts;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-11</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>Network</keyword> +<keyword>Interfaces</keyword> +</keywordset> +</articleinfo> + +<sect1> + +<title>Network Interfaces</title> + +<para> +This page displays information about the network interfaces +installed in your computer. +</para> + +<note><para>The exact information displayed is system-dependent. On +some systems, this information can not yet be displayed.</para></note> + +<para>The user cannot modify any settings on this page.</para> + + +</sect1> + +</article> diff --git a/doc/kcontrol/opengl/CMakeLists.txt b/doc/kcontrol/opengl/CMakeLists.txt new file mode 100644 index 000000000..aac8e4360 --- /dev/null +++ b/doc/kcontrol/opengl/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/opengl ) diff --git a/doc/kcontrol/opengl/Makefile.am b/doc/kcontrol/opengl/Makefile.am new file mode 100644 index 000000000..70f023492 --- /dev/null +++ b/doc/kcontrol/opengl/Makefile.am @@ -0,0 +1,2 @@ +KDE_LANG= en +KDE_DOCS = kcontrol/opengl diff --git a/doc/kcontrol/opengl/index.docbook b/doc/kcontrol/opengl/index.docbook new file mode 100644 index 000000000..2c972034a --- /dev/null +++ b/doc/kcontrol/opengl/index.docbook @@ -0,0 +1,47 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>OpenGL</acronym></title> +<articleinfo> + +<authorgroup> +<author><personname><firstname>Ilya</firstname><surname>Korniyko</surname></personname><email>[email protected]</email></author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> + +</authorgroup> + +<date></date> +<releaseinfo></releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>OpenGL</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="opengl"> + +<title>OpenGL</title> + +<para>This page displays information about installed <acronym>OpenGL</acronym> implementation. +OpenGL (for "Open Graphics Library") is a cross-platform, +hardware independent interface for 3D graphics.</para> + +<para><acronym>GLX</acronym> is the binding for OpenGL to X Window system.</para> + +<para> <acronym>DRI</acronym> (Direct Rendering Infrastucture) provides hardware acceleration for OpenGL. +You must have a videocard with 3D accelerator and properly installed driver for this.</para> +<para> </para> + +<para>Read more at the official OpenGL site <ulink url="http://www.opengl.org">http://www.opengl.org</ulink> </para> + +</sect1> + +</article> diff --git a/doc/kcontrol/partitions/CMakeLists.txt b/doc/kcontrol/partitions/CMakeLists.txt new file mode 100644 index 000000000..a436214de --- /dev/null +++ b/doc/kcontrol/partitions/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/partitions ) diff --git a/doc/kcontrol/partitions/Makefile.am b/doc/kcontrol/partitions/Makefile.am new file mode 100644 index 000000000..fb019e7ee --- /dev/null +++ b/doc/kcontrol/partitions/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/partitions diff --git a/doc/kcontrol/partitions/index.docbook b/doc/kcontrol/partitions/index.docbook new file mode 100644 index 000000000..f3655a8cf --- /dev/null +++ b/doc/kcontrol/partitions/index.docbook @@ -0,0 +1,56 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Partition Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>drive partition</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>Partition Information</title> + +<para>This page displays information about partitions on your hard +drives.</para> + +<note><para>The exact information displayed is system-dependent. On +some systems, partition information cannot be displayed +yet.</para></note> + +<para>On &Linux;, this information is read from <filename +class="devicefile">/proc/partitions</filename>, which is only available +if the <filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the (2.1.x or later) kernel.</para> + +<para>The first two columns are the major and minor numbers +respectively. The third column is the number of blocks (usually 1 +block = 1024 bytes). The fourth column is a label for the +device.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> + diff --git a/doc/kcontrol/pci/CMakeLists.txt b/doc/kcontrol/pci/CMakeLists.txt new file mode 100644 index 000000000..abe1d7856 --- /dev/null +++ b/doc/kcontrol/pci/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/pci ) diff --git a/doc/kcontrol/pci/Makefile.am b/doc/kcontrol/pci/Makefile.am new file mode 100644 index 000000000..45f7b2968 --- /dev/null +++ b/doc/kcontrol/pci/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/pci diff --git a/doc/kcontrol/pci/index.docbook b/doc/kcontrol/pci/index.docbook new file mode 100644 index 000000000..1d4d8b3f9 --- /dev/null +++ b/doc/kcontrol/pci/index.docbook @@ -0,0 +1,57 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>PCI</acronym>-bus and Installed <acronym>PCI</acronym> Cards</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>PCI</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="pci"> + +<title><acronym>PCI</acronym>-bus and Installed <acronym>PCI</acronym> +Cards</title> + +<para>This page displays information about the +<acronym>PCI</acronym>-bus and installed <acronym>PCI</acronym> cards, +and other devices that use the Peripheral Component Interconnect +(<acronym>PCI</acronym>) bus.</para> + +<note><para>The exact information displayed is system-dependent. On some +systems, <acronym>PCI</acronym>-information can not yet be +displayed.</para> </note> + +<para>On &Linux;, this information is read from <filename +class="devicefile">/proc/pci</filename> which is only available if the +<filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel. A listing of all <acronym>PCI</acronym> +devices found during kernel initialization, and their configuration, is +shown.</para> + +<para>Each entry begins with a bus, device and function number.</para> +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> diff --git a/doc/kcontrol/pcmcia/CMakeLists.txt b/doc/kcontrol/pcmcia/CMakeLists.txt new file mode 100644 index 000000000..c956d5b11 --- /dev/null +++ b/doc/kcontrol/pcmcia/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/pcmcia ) diff --git a/doc/kcontrol/pcmcia/Makefile.am b/doc/kcontrol/pcmcia/Makefile.am new file mode 100644 index 000000000..b13b11f46 --- /dev/null +++ b/doc/kcontrol/pcmcia/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/pcmcia diff --git a/doc/kcontrol/pcmcia/index.docbook b/doc/kcontrol/pcmcia/index.docbook new file mode 100644 index 000000000..901fdf2e5 --- /dev/null +++ b/doc/kcontrol/pcmcia/index.docbook @@ -0,0 +1,38 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>PCMCIA</acronym></title> +<articleinfo> + +<authorgroup> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>Laptop</keyword> +<keyword>PCMCIA</keyword> +</keywordset> +</articleinfo> + +<sect1 id="pcmcia"> +<title><acronym>PCMCIA</acronym></title> + +<para>This module displays information about <acronym>PCMCIA</acronym> +Cards</para> + +<para>The exact information is system dependent. On most systems no +information is displayed at all.</para> + +</sect1> +</article> diff --git a/doc/kcontrol/processor/CMakeLists.txt b/doc/kcontrol/processor/CMakeLists.txt new file mode 100644 index 000000000..25f3ff798 --- /dev/null +++ b/doc/kcontrol/processor/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/processor ) diff --git a/doc/kcontrol/processor/Makefile.am b/doc/kcontrol/processor/Makefile.am new file mode 100644 index 000000000..d42fb2991 --- /dev/null +++ b/doc/kcontrol/processor/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/processor diff --git a/doc/kcontrol/processor/index.docbook b/doc/kcontrol/processor/index.docbook new file mode 100644 index 000000000..3794aca67 --- /dev/null +++ b/doc/kcontrol/processor/index.docbook @@ -0,0 +1,56 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Processor Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>CPU</keyword> +<keyword>processor</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="processor"> +<title>Processor Information</title> + +<para>This page displays information about the system +Central Processing Unit (<acronym>CPU</acronym>).</para> + +<note><para>The exact information displayed is system-dependent. On +some systems, processor information cannot be displayed +yet.</para></note> + +<para>On &Linux;, this information is read from <filename +class="devicefile">/proc/cpuinfo</filename>, which is only available if +the <filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel.</para> + +<para>The exact contents of the window will depend on the +<acronym>CPU</acronym>(s) in your machine, but the window is organized +into two columns. The first column is the parameter, and the second +column is the value of that parameter.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> diff --git a/doc/kcontrol/protocols/CMakeLists.txt b/doc/kcontrol/protocols/CMakeLists.txt new file mode 100644 index 000000000..51032628c --- /dev/null +++ b/doc/kcontrol/protocols/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/protocols ) diff --git a/doc/kcontrol/protocols/Makefile.am b/doc/kcontrol/protocols/Makefile.am new file mode 100644 index 000000000..f46684563 --- /dev/null +++ b/doc/kcontrol/protocols/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/protocols diff --git a/doc/kcontrol/protocols/index.docbook b/doc/kcontrol/protocols/index.docbook new file mode 100644 index 000000000..c84aef578 --- /dev/null +++ b/doc/kcontrol/protocols/index.docbook @@ -0,0 +1,39 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Protocols</title> + +<articleinfo> +<authorgroup> +<author>&Lauri.Watts;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<keywordset> +<keyword>KDE</keyword> +<keyword>Protocols</keyword> +<keyword>IOSlaves</keyword> +</keywordset> +</articleinfo> + +<sect1 id="protocols"> +<title>Protocols</title> + +<para>On the left of the panel you will see a list of the IOSlaves that +are installed on your system. IOSlaves are how &tde; applications +<quote>talk</quote> to other computers, other applications, or act on +files.</para> + +<para>Clicking on an IOSlave name will display some help information +about that IOSlave, such as how to use it, and what it does.</para> + +<para>The protocols module is purely informational, you cannot change +any settings here.</para> + +</sect1> +</article>
\ No newline at end of file diff --git a/doc/kcontrol/samba/CMakeLists.txt b/doc/kcontrol/samba/CMakeLists.txt new file mode 100644 index 000000000..568062e6c --- /dev/null +++ b/doc/kcontrol/samba/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/samba ) diff --git a/doc/kcontrol/samba/Makefile.am b/doc/kcontrol/samba/Makefile.am new file mode 100644 index 000000000..126a8b41b --- /dev/null +++ b/doc/kcontrol/samba/Makefile.am @@ -0,0 +1,4 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/samba + diff --git a/doc/kcontrol/samba/index.docbook b/doc/kcontrol/samba/index.docbook new file mode 100644 index 000000000..69d7b91b9 --- /dev/null +++ b/doc/kcontrol/samba/index.docbook @@ -0,0 +1,207 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Samba Status Information</title> +<articleinfo> +<authorgroup> +<author>&Alexander.Neundorf;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>Samba</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="sambastatus"> + + +<title>Samba Status Information</title> + +<para>The Samba and <acronym>NFS</acronym> Status Monitor is a front end +to the programs <command>smbstatus</command> and +<command>showmount</command>. Smbstatus reports on current Samba +connections, and is part of the suite of Samba tools, which implements +the <acronym>SMB</acronym> (Session Message Block) protocol, also called +the NetBIOS or LanManager protocol.</para> + +<para>This protocol can be used to provide printer sharing or drive +sharing services on a network including machines running the various +flavors of &Microsoft; &Windows;.</para> + +<para><command>showmount</command> is part of the <acronym>NFS</acronym> +software package. <acronym>NFS</acronym> stands for Network File System +and is the traditional &UNIX; way to share folders over the +network. In this case the output of <command>showmount</command> +<option>-a localhost</option> is parsed. On some systems showmount is in +<filename class="directory">/usr/sbin</filename>, check if you have +showmount in your <envar>PATH</envar>.</para> + +<sect2 id="smb-exports"> +<title>Exports</title> + +<para>On this page you can see a big list which shows the currently +active connections to Samba shares and <acronym>NFS</acronym> exports of +your machine. The first column shows you whether the resource is a Samba +(<acronym>SMB</acronym>) share or a <acronym>NFS</acronym> export. The +second column contains the name of the share, the third the name of the +remote host, which accesses this share. The remaining columns have only +a meaning for Samba-shares.</para> + +<para>The fourth column contains the User <abbrev>ID</abbrev> of the +user, who accesses this share. Note that this does not have to be equal +to the &UNIX; user <abbrev>ID</abbrev> of this user. The same applies +for the next column, which displays the group <abbrev>ID</abbrev> of the +user.</para> + +<para>Each connection to one of your shares is handled by a single +process (<command>smbd</command>), the next column shows the process +<abbrev>ID</abbrev> (<acronym>pid</acronym>) of this +<command>smbd</command>. If you kill this process the connected user +will be disconnected. If the remote user works from &Windows;, as soon +as this process is killed a new one will be created, so he will almost +not notice it.</para> + +<para>The last column shows how many files this user has currently open. +Here you see only, how many files he has <emphasis>open</emphasis> just +now, you don't see how many he copied or formerly opened &etc;</para> + +</sect2> + +<sect2 id="smb-imports"> +<title>Imports</title> + +<para> Here you see which Samba- and <acronym>NFS</acronym>-shares from +other hosts are mounted on your local system. The first column shows +wether it is a Samba- or <acronym>NFS</acronym>-share, the second column +displays the name of the share, and the third shows where it is +mounted.</para> + +<para>The mounted <acronym>NFS</acronym>-shares you should see on +&Linux; (this has been tested), and it should also work on &Solaris; +(this has not been tested).</para> + +</sect2> + +<sect2 id="smb-log"> +<title>Log</title> + +<para>This page presents the contents of your local samba log file in a +nice way. If you open this page, the list will be empty. You have to +press the <guibutton>Update</guibutton> button, then the samba log file +will be read and the results displayed. Check whether the samba log file +on your system is really at the location as specified in the input +line. If it is somewhere else or if it has another name, correct +it. After changing the file name you have to press +<guibutton>Update</guibutton> again.</para> + +<para>Samba logs its actions according to the log level (see +<filename>smb.conf</filename>). If loglevel = 1, samba logs only when +somebody connects to your machine and when this connection is closed +again. If log level = 2, it logs also if somebody opens a file and if he +closes the file again. If the log level is higher than 2, yet more +stuff is logged.</para> + +<para>If you are interested in who accesses your machine, and which +files are accessed, you should set the log level to 2 and regularly +create a new samba log file (⪚ set up a <command>cron</command> task +which once a week moves your current samba log file into another +folder or something like that). Otherwise your samba log file may +become very big.</para> + +<para>With the four checkboxes below the big list you can decide, which +events are displayed in the list. You have to press +<guibutton>Update</guibutton> to see the results. If the log level of +your samba is too low, you won't see everything.</para> + +<para>By clicking on the header of one column you can sort the list by +this column.</para> + +</sect2> + + +<sect2 id="smb-statistics"> +<title>Statistics</title> + +<para>On this page you can filter the contents of the third page for +certain contents.</para> + +<para>Let's say the <guilabel>Event</guilabel> field (not the one in the +list) is set to <userinput>Connection</userinput>, +<guilabel>Service/File</guilabel> is set to <userinput>*</userinput>, +<guilabel>Host/User</guilabel> is set to <userinput>*</userinput>, +<guilabel>Show expanded service info</guilabel> is disabled and +<guilabel>Show expanded host info</guilabel> is disabled.</para> + +<para>If you press <guibutton>Update</guibutton> now, you will see how +often a connection was opened to share <literal>*</literal> (&ie; to any +share) from host <literal>*</literal> (&ie; from any host). Now enable +<guilabel>Show expanded host info</guilabel> and press +<guibutton>Update</guibutton> again. Now you will see for every host +which matches the wildcard <literal>*</literal>, how many connections +were opened by him.</para> + +<para>Now press <guibutton>clear</guibutton>.</para> + +<para>Now set the <guilabel>Event</guilabel> field to File Access and +enable <guilabel>Show expanded service info</guilabel> and press +<guibutton>Update</guibutton> again.</para> + +<para>Now you will see how often every single file was accessed. If you +enable <guilabel>Show expanded host info</guilabel> too, you will see +how often every single user opened each file.</para> + +<para>In the input lines <guilabel>Service/File</guilabel> and +<guilabel>Host/User</guilabel> you can use the wildcards +<literal>*</literal> and <literal>?</literal> in the same way you use +them at the command line. Regular expressions are not +recognized.</para> + +<para>By clicking on the header of a column you can sort the list by +this column. This way you can check out which file was opened most +often, or which user opened the most files or whatever.</para> + +</sect2> + + +<sect2 id="smb-stat-author"> +<title>Section Author</title> + +<para>Module copyright 2000: Michael Glauche and &Alexander.Neundorf; &Alexander.Neundorf.mail;</para> + +<para>Originally written by: Michael Glauche</para> + +<para>Currently maintained by: &Alexander.Neundorf; &Alexander.Neundorf.mail;</para> + +<itemizedlist> +<title>Contributors</title> +<listitem><para>Conversion to kcontrol applet:</para> +<para>&Matthias.Hoelzer-Kluepfel; &Matthias.Hoelzer-Kluepfel.mail;</para></listitem> +<listitem><para>Use of <classname>TDEProcess</classname> instead of popen, and more error checking:</para> +<para>&David.Faure; &David.Faure.mail;</para></listitem> +<listitem><para>Conversion to tdecmodule, added tab pages 2,3,4, bug +fixed:</para> +<para>&Alexander.Neundorf; &Alexander.Neundorf.mail;</para></listitem> +</itemizedlist> + +<para>Documentation copyright 2000 &Alexander.Neundorf; &Alexander.Neundorf.mail;</para> + +<para>Documentation translated to docbook by &Mike.McBride; &Mike.McBride.mail;</para> + +<!-- TRANS:CREDIT_FOR_TRANSLATORS --> + +</sect2> +</sect1> + +</article>
\ No newline at end of file diff --git a/doc/kcontrol/scsi/CMakeLists.txt b/doc/kcontrol/scsi/CMakeLists.txt new file mode 100644 index 000000000..1ecefb528 --- /dev/null +++ b/doc/kcontrol/scsi/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/scsi) diff --git a/doc/kcontrol/scsi/Makefile.am b/doc/kcontrol/scsi/Makefile.am new file mode 100644 index 000000000..4a0b433e5 --- /dev/null +++ b/doc/kcontrol/scsi/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG = en +KDE_DOCS = kcontrol/scsi diff --git a/doc/kcontrol/scsi/index.docbook b/doc/kcontrol/scsi/index.docbook new file mode 100644 index 000000000..87ec0934f --- /dev/null +++ b/doc/kcontrol/scsi/index.docbook @@ -0,0 +1,56 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>SCSI</acronym> Interface Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>SCSI</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="scsi"> + +<title><acronym>SCSI</acronym> Interface Information</title> + +<para>This page displays information about Small Computer Systems +Interface (<acronym>SCSI</acronym>) Interfaces and the attached +<acronym>SCSI</acronym> devices.</para> + +<note><para>The exact information displayed is system-dependent. On +some systems <acronym>SCSI</acronym> information cannot be displayed +yet.</para></note> + +<para>On &Linux;, this information is read from <filename +class="devicefile">/proc/scsi/scsi</filename>, which is only available +if the <filename class="directory">/proc</filename> pseudo-filesystem is +compiled into the kernel. A listing of all <acronym>SCSI</acronym> +devices known to the kernel is shown.</para> + +<para>The devices are sorted numerically by their host, channel, and +<acronym>ID</acronym> numbers.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> diff --git a/doc/kcontrol/sound/CMakeLists.txt b/doc/kcontrol/sound/CMakeLists.txt new file mode 100644 index 000000000..18f11a032 --- /dev/null +++ b/doc/kcontrol/sound/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/sound ) diff --git a/doc/kcontrol/sound/Makefile.am b/doc/kcontrol/sound/Makefile.am new file mode 100644 index 000000000..a1a9b851c --- /dev/null +++ b/doc/kcontrol/sound/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/sound diff --git a/doc/kcontrol/sound/index.docbook b/doc/kcontrol/sound/index.docbook new file mode 100644 index 000000000..de1fd601d --- /dev/null +++ b/doc/kcontrol/sound/index.docbook @@ -0,0 +1,51 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title>Soundcard Information</title> +<articleinfo> + +<authorgroup> +<author>&Matthias.Hoelzer-Kluepfel;</author> +<author>&Helge.Deller;</author> +<author>&Duncan.Haldane;</author> +<author>&Mike.McBride;</author> +<!-- TRANS:ROLES_OF_TRANSLATORS --> +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>soundcard</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="soundinfo"> + +<title>Soundcard Information</title> + +<para>This page displays information about any soundcards installed in the +system.</para> + +<note><para>The exact information displayed is system-dependent. On some +systems, soundcard information cannot be displayed yet.</para></note> + +<para>On &Linux;, this information is read either from <filename +class="devicefile">/dev/sndstat</filename>, if present, or from +<filename class="devicefile">/proc/sound</filename>, which is only +available if the <filename class="directory">/proc</filename> +pseudo-filesystem is compiled into the (2.1.x or later) kernel.</para> + +<para>The user cannot modify any settings on this page.</para> + +</sect1> + +</article> diff --git a/doc/kcontrol/usb/CMakeLists.txt b/doc/kcontrol/usb/CMakeLists.txt new file mode 100644 index 000000000..7be562cd5 --- /dev/null +++ b/doc/kcontrol/usb/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/usb ) diff --git a/doc/kcontrol/usb/Makefile.am b/doc/kcontrol/usb/Makefile.am new file mode 100644 index 000000000..2d7f2a44c --- /dev/null +++ b/doc/kcontrol/usb/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/usb diff --git a/doc/kcontrol/usb/index.docbook b/doc/kcontrol/usb/index.docbook new file mode 100644 index 000000000..8936fa796 --- /dev/null +++ b/doc/kcontrol/usb/index.docbook @@ -0,0 +1,43 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;"> +<title><acronym>USB</acronym></title> +<articleinfo> + +<authorgroup> +<author> +<firstname></firstname> +<surname></surname> +</author> + +<!-- TRANS:ROLES_OF_TRANSLATORS --> + +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KControl</keyword> +<keyword>USB</keyword> +<keyword>System Information</keyword> +</keywordset> +</articleinfo> + +<sect1 id="usb"> + +<title><acronym>USB</acronym></title> + +<para>This module allows you to see the devices attached to your +<acronym>USB</acronym> bus(es).</para> + +<para>This module is for information only, you cannot edit any +information you see here.</para> +</sect1> + +</article>
\ No newline at end of file diff --git a/doc/kcontrol/xserver/CMakeLists.txt b/doc/kcontrol/xserver/CMakeLists.txt new file mode 100644 index 000000000..e33cbe3ea --- /dev/null +++ b/doc/kcontrol/xserver/CMakeLists.txt @@ -0,0 +1,12 @@ +################################################# +# +# (C) 2010-2011 Serghei Amelian +# serghei (DOT) amelian (AT) gmail.com +# +# Improvements and feedback are welcome +# +# This file is released under GPL >= 2 +# +################################################# + +tde_create_handbook( DESTINATION kcontrol/xserver ) diff --git a/doc/kcontrol/xserver/Makefile.am b/doc/kcontrol/xserver/Makefile.am new file mode 100644 index 000000000..9d915d89f --- /dev/null +++ b/doc/kcontrol/xserver/Makefile.am @@ -0,0 +1,3 @@ + +KDE_LANG= en +KDE_DOCS = kcontrol/xserver diff --git a/doc/kcontrol/xserver/index.docbook b/doc/kcontrol/xserver/index.docbook new file mode 100644 index 000000000..a56e47fb3 --- /dev/null +++ b/doc/kcontrol/xserver/index.docbook @@ -0,0 +1,56 @@ +<?xml version="1.0" ?> +<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" +"dtd/kdex.dtd" [ +<!ENTITY % addindex "IGNORE"> +<!ENTITY % English "INCLUDE" > <!-- change language only here --> +]> + +<article lang="&language;" id="xserver"> +<title>X Server Information</title> +<articleinfo> + +<authorgroup> +<author>&Mike.McBride;</author> + +<!-- TRANS:ROLES_OF_TRANSLATORS --> + +</authorgroup> + +<date>2002-02-12</date> +<releaseinfo>3.00.00</releaseinfo> + +<keywordset> +<keyword>KDE</keyword> +<keyword>KControl</keyword> +<keyword>X server</keyword> +<keyword>system information</keyword> +</keywordset> +</articleinfo> + +<sect1> +<title>X Server Information</title> + +<para>This screen is useful for getting specific information about your +X server and the current session of X.</para> + +<para>When you open this module, you are presented with some +information. The left hand side of the window is organized into a +tree. Some of the elements have a plus sign in front of the label. +Clicking this sign opens a <quote>submenu</quote> related to the +label. Clicking on a minus sign in front of a label hides the +submenu.</para> + +<para>The right hand side of the window contains the individual +values for each of the parameters on the left.</para> + +<para>The information presented will vary depending on your +setup.</para> + +<note><para>Some setups may not be able to determine some or all of the +parameters.</para></note> + +<para>You can not change any values from this menu. It is for +information only.</para> + +</sect1> +</article> |