From 14c49c4f56792a934bcdc4efceebbd429d858571 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 6 Nov 2011 15:56:37 -0600 Subject: Actually move the kde files that were renamed in the last commit --- libtdegames/kgame/kmessageio.h | 421 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 421 insertions(+) create mode 100644 libtdegames/kgame/kmessageio.h (limited to 'libtdegames/kgame/kmessageio.h') diff --git a/libtdegames/kgame/kmessageio.h b/libtdegames/kgame/kmessageio.h new file mode 100644 index 00000000..326476ff --- /dev/null +++ b/libtdegames/kgame/kmessageio.h @@ -0,0 +1,421 @@ +/* + This file is part of the KDE games library + Copyright (C) 2001 Burkhard Lehner (Burkhard.Lehner@gmx.de) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License version 2 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public License + along with this library; see the file COPYING.LIB. If not, write to + the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. +*/ + +/* + KMessageIO class and subclasses KMessageSocket and KMessageDirect +*/ + +#ifndef _KMESSAGEIO_H_ +#define _KMESSAGEIO_H_ + +#include +#include +#include +#include +#include +#include +#include + +class TQSocket; +class KProcess; +//class TQFile; + + +/** + This abstract base class represents one end of a message connections + between two clients. Each client has one object of a subclass of + KMessageIO. Calling /e send() on one object will emit the signal + /e received() on the other object, and vice versa. + + For each type of connection (TCP/IP socket, COM port, direct connection + within the same class) a subclass of KMessageIO must be defined that + implements the pure virtual methods /e send() and /e isConnected(), + and sends the signals. (See /e KMessageSocket for an example implementation.) + + Two subclasses are already included: /e KMessageSocket (connection using + TCP/IP sockets) and /e KMessageDirect (connection using method calls, both + sides must be within the same process). +*/ + +class KMessageIO : public TQObject +{ + Q_OBJECT + TQ_OBJECT + +public: + /** + * The usual TQObject constructor, does nothing else. + **/ + KMessageIO (TQObject *parent = 0, const char *name = 0); + + /** + * The usual destructor, does nothing special. + **/ + ~KMessageIO (); + + /** + * The runtime idendifcation + */ + virtual int rtti() const {return 0;} + + /** + * @return Whether this KMessageIO is a network IO or not. + **/ + //virtual bool isNetwork () const = 0; + virtual bool isNetwork () const + { + kdError(11001) << "Calling PURE virtual isNetwork...BAD" << endl; + return false; + } + + /** + This method returns the status of the object, whether it is already + (or still) connected to another KMessageIO object or not. + + This is a pure virtual method, so it has to be implemented in a subclass + of KMessageIO. + */ + //virtual bool isConnected () const = 0; + virtual bool isConnected () const + { + kdError(11001) << "Calling PURE virtual isConencted...BAD" << endl; + return false; + } + + /** + Sets the ID number of this object. This number can for example be used to + distinguish several objects in a server. + + NOTE: Sometimes it is useful to let two connected KMessageIO objects + have the same ID number. You have to do so yourself, KMessageIO doesn't + change this value on its own! + */ + void setId (TQ_UINT32 id); + + /** + Queries the ID of this object. + */ + TQ_UINT32 id (); + + /** + @since 3.2 + @return 0 in the default implementation. Reimplemented in @ref KMessageSocket. + */ + virtual TQ_UINT16 peerPort () const { return 0; } + + /** + @since 3.2 + @return "localhost" in the default implementation. Reimplemented in @ref KMessageSocket + */ + virtual TQString peerName () const { return TQString::tqfromLatin1("localhost"); } + + +signals: + /** + This signal is emitted when /e send() on the connected KMessageIO + object is called. The parameter contains the same data array in /e msg + as was used in /e send(). + */ + void received (const TQByteArray &msg); + + /** + This signal is emitted when the connection is closed. This can be caused + by a hardware error (e.g. broken internet connection) or because the other + object was killed. + + Note: Sometimes a broken connection can be undetected for a long time, + or may never be detected at all. So don't rely on this signal! + */ + void connectionBroken (); + +public slots: + + /** + This slot sends the data block in /e msg to the connected object, that will + emit /e received(). + + For a concrete class, you have to subclass /e KMessageIO and overwrite this + method. In the subclass, implement this method as an ordinary method, not + as a slot! (Otherwise another slot would be defined. It would work, but uses + more memory and time.) See /e KMessageSocket for an example implementation. + */ + virtual void send (const TQByteArray &msg) = 0; + +protected: + TQ_UINT32 m_id; +}; + + +/** + This class implements the message communication using a TCP/IP socket. The + object can connect to a server socket, or can use an already connected socket. +*/ + +class KMessageSocket : public KMessageIO +{ + Q_OBJECT + TQ_OBJECT + +public: + /** + Connects to a server socket on /e host with /e port. host can be an + numerical (e.g. "192.168.0.212") or symbolic (e.g. "wave.peter.org") + IP address. You can immediately use the /e sendSystem() and + /e sendBroadcast() methods. The messages are stored and sent to the + receiver after the connection is established. + + If the connection could not be established (e.g. unknown host or no server + socket at this port), the signal /e connectionBroken is emitted. + */ + KMessageSocket (TQString host, TQ_UINT16 port, TQObject *parent = 0, + const char *name = 0); + + /** + Connects to a server socket on /e host with /e port. You can immediately + use the /e sendSystem() and /e sendBroadcast() methods. The messages are + stored and sent to the receiver after the connection is established. + + If the connection could not be established (e.g. unknown host or no server + socket at this port), the signal /e connectionBroken is emitted. + */ + KMessageSocket (TQHostAddress host, TQ_UINT16 port, TQObject *parent = 0, + const char *name = 0); + + /** + Uses /e socket to do the communication. + + The socket should already be connected, or at least be in /e connecting + state. + + Note: The /e socket object is then owned by the /e KMessageSocket object. + So don't use it otherwise any more and don't delete it. It is deleted + together with this KMessageSocket object. (Use 0 as parent for the TQSocket + object t ensure it is not deleted.) + */ + KMessageSocket (TQSocket *socket, TQObject *parent = 0, const char *name = 0); + + /** + Uses the socket specified by the socket descriptor socketFD to do the + communication. The socket must already be connected. + + This constructor can be used with a TQServerSocket within the (pure + virtual) method /e newConnection. + + Note: The socket is then owned by the /e KMessageSocket object. So don't + manipulate the socket afterwards, especially don't close it. The socket is + automatically closed when KMessageSocket is deleted. + */ + KMessageSocket (int socketFD, TQObject *parent = 0, const char *name = 0); + + /** + Destructor, closes the socket. + */ + ~KMessageSocket (); + + /** + * The runtime idendifcation + */ + virtual int rtti() const {return 1;} + + /** + @since 3.2 + @return The port that this object is connected to. See TQSocket::peerPort + */ + virtual TQ_UINT16 peerPort () const; + + /** + @since 3.2 + @return The hostname this object is connected to. See TQSocket::peerName. + */ + virtual TQString peerName () const; + + /** + @return TRUE as this is a network IO. + */ + bool isNetwork() const { return true; } + + /** + Returns true if the socket is in state /e connected. + */ + bool isConnected () const; + + /** + Overwritten slot method from KMessageIO. + + Note: It is not declared as a slot method, since the slot is already + defined in KMessageIO as a virtual method. + */ + void send (const TQByteArray &msg); + +protected slots: + virtual void processNewData (); + +protected: + void initSocket (); + TQSocket *mSocket; + bool mAwaitingHeader; + TQ_UINT32 mNextBlockLength; + + bool isRecursive; // workaround for "bug" in TQSocket, TQt 2.2.3 or older +}; + + +/** + This class implements the message communication using function calls + directly. It can only be used when both sides of the message pipe are + within the same process. The communication is very fast. + + To establish a communication, you have to create two instances of + KMessageDirect, the first one with no parameters in the constructor, + the second one with the first as parameter: + + /code + KMessageDirect *peer1, *peer2; + peer1 = new KMessageDirect (); // unconnected + peer2 = new KMessageDirect (peer1); // connect with peer1 + /endcode + + The connection is only closed when one of the instances is deleted. +*/ + +class KMessageDirect : public KMessageIO +{ + Q_OBJECT + TQ_OBJECT + +public: + /** + Creates an object and connects it to the object given in the first + parameter. Use 0 as first parameter to create an unconnected object, + that is later connected. + + If that object is already connected, the object remains unconnected. + */ + KMessageDirect (KMessageDirect *partner = 0, TQObject *parent = 0, const char +*name = 0); + + /** + Destructor, closes the connection. + */ + ~KMessageDirect (); + + /** + * The runtime idendifcation + */ + virtual int rtti() const {return 2;} + + + /** + @return FALSE as this is no network IO. + */ + bool isNetwork() const { return false; } + + /** + Returns true, if the object is connected to another instance. + + If you use the first constructor, the object is unconnected unless another + object is created with this one as parameter. + + The connection can only be closed by deleting one of the objects. + */ + bool isConnected () const; + + /** + Overwritten slot method from KMessageIO. + + Note: It is not declared as a slot method, since the slot is already + defined in KMessageIO as a virtual method. + */ + void send (const TQByteArray &msg); + +protected: + KMessageDirect *mPartner; +}; + +class KMessageProcess : public KMessageIO +{ + Q_OBJECT + TQ_OBJECT + + public: + KMessageProcess(TQObject *parent, TQString file); + ~KMessageProcess(); + bool isConnected() const; + void send (const TQByteArray &msg); + void writeToProcess(); + + /** + @return FALSE as this is no network IO. + */ + bool isNetwork() const { return false; } + + /** + * The runtime idendifcation + */ + virtual int rtti() const {return 3;} + + + + public slots: + void slotReceivedStdout(KProcess *proc, char *buffer, int buflen); + void slotReceivedStderr(KProcess *proc, char *buffer, int buflen); + void slotProcessExited(KProcess *p); + void slotWroteStdin(KProcess *p); + + private: + TQString mProcessName; + KProcess *mProcess; + TQPtrQueue mQueue; + TQByteArray *mSendBuffer; + TQByteArray mReceiveBuffer; + unsigned int mReceiveCount; +}; + +class KMessageFilePipe : public KMessageIO +{ + Q_OBJECT + TQ_OBJECT + + public: + KMessageFilePipe(TQObject *parent,TQFile *readFile,TQFile *writeFile); + ~KMessageFilePipe(); + bool isConnected() const; + void send (const TQByteArray &msg); + void exec(); + + /** + @return FALSE as this is no network IO. + */ + bool isNetwork() const { return false; } + + /** + * The runtime idendifcation + */ + virtual int rtti() const {return 4;} + + + + private: + TQFile *mReadFile; + TQFile *mWriteFile; + TQByteArray mReceiveBuffer; + unsigned int mReceiveCount; +}; + +#endif -- cgit v1.2.1