diff options
Diffstat (limited to 'kpovmodeler/pmblobcylinder.cpp')
| -rw-r--r-- | kpovmodeler/pmblobcylinder.cpp | 468 |
1 files changed, 468 insertions, 0 deletions
diff --git a/kpovmodeler/pmblobcylinder.cpp b/kpovmodeler/pmblobcylinder.cpp new file mode 100644 index 00000000..687ce132 --- /dev/null +++ b/kpovmodeler/pmblobcylinder.cpp @@ -0,0 +1,468 @@ +/* +************************************************************************** + description + -------------------- + copyright : (C) 2002 by Andreas Zehender + email : [email protected] +************************************************************************** + +************************************************************************** +* * +* This program is free software; you can redistribute it and/or modify * +* it under the terms of the GNU General Public License as published by * +* the Free Software Foundation; either version 2 of the License, or * +* (at your option) any later version. * +* * +**************************************************************************/ + + +#include "pmblobcylinder.h" + +#include "pmxmlhelper.h" +#include "pmboxedit.h" +#include "pmmemento.h" +#include "pm3dcontrolpoint.h" +#include "pmdefaults.h" +#include "pmdistancecontrolpoint.h" +#include "pmblobcylinderedit.h" + +#include <klocale.h> + +PMDefinePropertyClass( PMBlobCylinder, PMBlobCylinderProperty ); + +PMMetaObject* PMBlobCylinder::s_pMetaObject = 0; +PMObject* createNewBlobCylinder( PMPart* part ) +{ + return new PMBlobCylinder( part ); +} + +const double c_defaultRadius = 0.5; +const PMVector c_defaultEnd1 = PMVector ( 0, 0.5, 0 ); +const PMVector c_defaultEnd2 = PMVector ( 0, -0.5, 0 ); +const double c_defaultStrength = 1.0; + +/** default cylinder structure */ +PMViewStructure* PMBlobCylinder::s_pDefaultViewStructure = 0; +int PMBlobCylinder::s_vStep = c_defaultBlobCylinderVSteps; +int PMBlobCylinder::s_uStep = c_defaultBlobCylinderUSteps; +int PMBlobCylinder::s_parameterKey = 0; + + +PMBlobCylinder::PMBlobCylinder( PMPart* part ) + : Base( part ) +{ + m_end1 = c_defaultEnd1; + m_end2 = c_defaultEnd2; + m_radius = c_defaultRadius; + m_strength = c_defaultStrength; +} + +PMBlobCylinder::PMBlobCylinder( const PMBlobCylinder& c ) + : Base( c ) +{ + m_end1 = c.m_end1; + m_end2 = c.m_end2; + m_radius = c.m_radius; + m_strength = c.m_strength; +} + +PMBlobCylinder::~PMBlobCylinder( ) +{ +} + +QString PMBlobCylinder::description( ) const +{ + return i18n( "blob cylinder" ); +} + +void PMBlobCylinder::serialize( QDomElement& e, QDomDocument& doc ) const +{ + e.setAttribute( "end_a", m_end1.serializeXML( ) ); + e.setAttribute( "end_b", m_end2.serializeXML( ) ); + e.setAttribute( "radius", m_radius ); + e.setAttribute( "strength", m_strength ); + Base::serialize( e, doc ); +} + +void PMBlobCylinder::readAttributes( const PMXMLHelper& h ) +{ + m_end1 = h.vectorAttribute( "end_a", c_defaultEnd1 ); + m_end2 = h.vectorAttribute( "end_b", c_defaultEnd2 ); + m_radius = h.doubleAttribute( "radius", c_defaultRadius ); + m_strength = h.doubleAttribute( "strength", c_defaultStrength ); + Base::readAttributes( h ); +} + +PMMetaObject* PMBlobCylinder::metaObject( ) const +{ + if( !s_pMetaObject ) + { + s_pMetaObject = new PMMetaObject( "BlobCylinder", Base::metaObject( ), + createNewBlobCylinder ); + s_pMetaObject->addProperty( + new PMBlobCylinderProperty( "end1", &PMBlobCylinder::setEnd1, + &PMBlobCylinder::end1 ) ); + s_pMetaObject->addProperty( + new PMBlobCylinderProperty( "end2", &PMBlobCylinder::setEnd2, + &PMBlobCylinder::end2 ) ); + s_pMetaObject->addProperty( + new PMBlobCylinderProperty( "radius", &PMBlobCylinder::setRadius, + &PMBlobCylinder::radius ) ); + s_pMetaObject->addProperty( + new PMBlobCylinderProperty( "strength", &PMBlobCylinder::setStrength, + &PMBlobCylinder::strength ) ); + } + return s_pMetaObject; +} + +void PMBlobCylinder::setEnd1( const PMVector& p ) +{ + if( p != m_end1 ) + { + if( m_pMemento ) + m_pMemento->addData( s_pMetaObject, PMEnd1ID, m_end1 ); + m_end1 = p; + m_end1.resize( 3 ); + setViewStructureChanged( ); + } +} + +void PMBlobCylinder::setEnd2( const PMVector& p ) +{ + if( p != m_end2 ) + { + if( m_pMemento ) + m_pMemento->addData( s_pMetaObject, PMEnd2ID, m_end2 ); + m_end2 = p; + m_end2.resize( 3 ); + setViewStructureChanged( ); + } +} + +void PMBlobCylinder::setRadius( double radius ) +{ + if( m_radius != radius ) + { + if( m_pMemento ) + m_pMemento->addData( s_pMetaObject, PMRadiusID, m_radius ); + m_radius = radius; + setViewStructureChanged( ); + } +} + +void PMBlobCylinder::setStrength( double s ) +{ + if( s != m_strength ) + { + if( m_pMemento ) + m_pMemento->addData( s_pMetaObject, PMStrengthID, m_strength ); + m_strength = s; + } +} + +PMDialogEditBase* PMBlobCylinder::editWidget( QWidget* parent ) const +{ + return new PMBlobCylinderEdit( parent ); +} + +void PMBlobCylinder::restoreMemento( PMMemento* s ) +{ + PMMementoDataIterator it( s ); + PMMementoData* data; + + for( ; it.current( ); ++it ) + { + data = it.current( ); + if( data->objectType( ) == s_pMetaObject ) + { + switch( data->valueID( ) ) + { + case PMEnd1ID: + setEnd1( data->vectorData( ) ); + break; + case PMEnd2ID: + setEnd2( data->vectorData( ) ); + break; + case PMRadiusID: + setRadius( data->doubleData( ) ); + break; + case PMStrengthID: + setStrength( data->doubleData( ) ); + break; + default: + kdError( PMArea ) << "Wrong ID in PMBlobCylinder::restoreMemento\n"; + break; + } + } + } + Base::restoreMemento( s ); +} + +bool PMBlobCylinder::isDefault( ) +{ + if( ( m_end1 == c_defaultEnd1 ) && ( m_end2 == c_defaultEnd2 ) + && ( m_radius == c_defaultRadius ) + && globalDetail( ) ) + return true; + return false; +} + +void PMBlobCylinder::createViewStructure( ) +{ + if( !m_pViewStructure ) + { + m_pViewStructure = new PMViewStructure( defaultViewStructure ( ) ); + m_pViewStructure->points( ).detach( ); + } + + int uStep = (int)( ( (float)s_uStep / 2 ) * ( displayDetail( ) + 1 ) ); + int vStep = (int)( ( (float)s_vStep / 2 ) * ( displayDetail( ) + 1 ) ); + unsigned ptsSize = vStep * uStep * 2 + 2; + unsigned lineSize = vStep * uStep * 4 + vStep; + + if( ptsSize != m_pViewStructure->points( ).size( ) ) + m_pViewStructure->points( ).resize( ptsSize ); + + createPoints( m_pViewStructure->points( ), m_end1, m_end2, m_radius, uStep, vStep ); + + if( lineSize != m_pViewStructure->lines( ).size( ) ) + { + m_pViewStructure->lines( ).detach( ); + m_pViewStructure->lines( ).resize( lineSize ); + createLines( m_pViewStructure->lines( ), uStep, vStep ); + } +} + +PMViewStructure* PMBlobCylinder::defaultViewStructure( ) const +{ + if( !s_pDefaultViewStructure || s_pDefaultViewStructure->parameterKey( ) != viewStructureParameterKey( ) ) + { + delete s_pDefaultViewStructure; + s_pDefaultViewStructure = 0; + int uStep = (int)( ( (float)s_uStep / 2 ) * ( displayDetail( ) + 1 ) ); + int vStep = (int)( ( (float)s_vStep / 2 ) * ( displayDetail( ) + 1 ) ); + + s_pDefaultViewStructure = + new PMViewStructure( vStep * uStep * 2 + 2, + vStep * uStep * 4 + vStep ); + + createPoints( s_pDefaultViewStructure->points( ), c_defaultEnd1, + c_defaultEnd2, c_defaultRadius, uStep, vStep ); + + createLines( s_pDefaultViewStructure->lines( ), uStep, vStep ); + } + return s_pDefaultViewStructure; +} + +void PMBlobCylinder::createLines( PMLineArray& lines, int uStep, int vStep ) +{ + int u, v; + int offset = 0; + + // horizontal lines + for( u = 0; u < ( uStep * 2 ); u++ ) + { + for( v = 0; v < ( vStep - 1 ); v++ ) + lines[offset + v] = + PMLine( u * vStep + v + 1, u * vStep + v + 2 ); + lines[offset + vStep - 1] = + PMLine( u * vStep + 1, u * vStep + vStep ); + + offset += vStep; + } + + // vertical lines + // lines at the "north pole" + for( v = 0; v < vStep; v++ ) + lines[offset + v] = PMLine( 0, v + 1 ); + offset += vStep; + + for( v = 0; v < vStep; v++ ) + { + for( u = 0; u < ( 2 * uStep - 1 ); u++ ) + { + lines[offset + u] = + PMLine( u * vStep + v + 1, ( u + 1 ) * vStep + v + 1 ); + } + offset += ( 2 * uStep - 1 ); + } + // lines at the "south pole" + for( v = 0; v < vStep; v++ ) + lines[offset + v] = PMLine( ( 2 * uStep - 1 ) * vStep + v + 1, + 2 * uStep * vStep + 1 ); + // offset += vStep; +} + +void PMBlobCylinder::createPoints( PMPointArray& points, const PMVector& end1, + const PMVector& end2, double radius, int uStep, int vStep ) +{ + double uRadStep = M_PI / uStep / 2.0; + double vRadStep = 2 * M_PI / vStep; + double du = uRadStep; + + if( radius < 0 ) + radius = -radius; + + PMVector pointAt = end2 - end1; + double pl = pointAt.abs( ); + if( approxZero( pl ) ) + pointAt = PMVector( 0.0, 0.0, 1.0 ); + else + pointAt /= pl; + + PMMatrix rotation = PMMatrix::rotation( pointAt, vRadStep ); + PMVector ortho = pointAt.orthogonal( ); + ortho /= ortho.abs( ); + + points[0] = PMPoint( end1 - pointAt * radius ); + points[vStep * uStep * 2 + 1] = PMPoint( end2 + pointAt * radius ); + + int u, v; + for( u = 0; u < uStep; u++ ) + { + PMVector end = ortho * radius * sin( du ); + PMVector pv = pointAt * radius * cos( du ); + PMVector e1 = end1 - pv; + PMVector e2 = end2 + pv; + + for( v = 0; v < vStep; v++ ) + { + points[u * vStep + v + 1] = PMPoint( e1 + end ); + points[vStep * uStep * 2 - ( u + 1 ) * vStep + v + 1] + = PMPoint( e2 + end ); + end = rotation * end; + } + du += uRadStep; + } +} + +void PMBlobCylinder::controlPoints( PMControlPointList & list ) +{ + PMVector center, angle1, angle2; + center = m_end1 - m_end2; + double pl = center.abs( ); + if( approxZero( pl ) ) + center = PMVector( 0.0, 1.0, 0.0 ); + else + center /= pl; + + angle1 = center.orthogonal( ); + angle2 = PMVector::cross( center, angle1 ); + + PM3DControlPoint* pb = new PM3DControlPoint( m_end1, PMEnd1ID, i18n( "End 1" ) ); + list.append( pb ); + list.append( new PM3DControlPoint( m_end2, PMEnd2ID, i18n( "End 2" ) ) ); + list.append( new PMDistanceControlPoint( pb, angle1, m_radius, PMRadiusID, i18n( "Radius (1)" ) ) ); + list.append( new PMDistanceControlPoint( pb, angle2, m_radius, PMRadiusID, i18n( "Radius (2)" ) ) ); +} + + +void PMBlobCylinder::controlPointsChanged( PMControlPointList & list ) +{ + PMControlPoint* p; + bool pointChanged = false; + bool radiusChanged = false; + + for( p = list.first( ); p; p = list.next( ) ) + { + if( p->changed( ) ) + { + switch( p->id( ) ) + { + case PMEnd1ID: + setEnd1( ( ( PM3DControlPoint *) p)->point( ) ); + pointChanged = true; + break; + case PMEnd2ID: + setEnd2( ( ( PM3DControlPoint *) p)->point( ) ); + pointChanged = true; + break; + case PMRadiusID: + setRadius( ( ( PMDistanceControlPoint *) p)->distance( ) ); + radiusChanged = true; + break; + default: + kdError( PMArea ) << "Wrong ID in PMBlobCylinder::controlPointsChanged\n"; + break; + } + } + } + + if( pointChanged ) + { + PMVector center, angle1, angle2; + bool firstPoint = true; + + center = m_end1 - m_end2; + double pl = center.abs( ); + if( approxZero( pl ) ) + center = PMVector( 0.0, 1.0, 0.0 ); + else + center /= pl; + + angle1 = center.orthogonal( ); + angle2 = PMVector::cross( center, angle1 ); + + for( p = list.first( ); p; p = list.next( ) ) + if( p->id( ) == PMRadiusID ) + { + if( firstPoint ) + { + ( ( PMDistanceControlPoint *) p)->setDirection( angle1 ); + firstPoint = false; + } + else + ( ( PMDistanceControlPoint *) p)->setDirection( angle2 ); + } + } + + if( radiusChanged ) + for( p = list.first( ); p; p = list.next( ) ) + if( p->id( ) == PMRadiusID ) + ( ( PMDistanceControlPoint *) p)->setDistance( m_radius ); +} + +void PMBlobCylinder::setUSteps( int u ) +{ + if( u >= 2 ) + { + s_uStep = u; + if( s_pDefaultViewStructure ) + { + delete s_pDefaultViewStructure; + s_pDefaultViewStructure = 0; + } + } + else + kdDebug( PMArea ) << "PMBlobCylinder::setUSteps: U must be greater than 1\n"; + s_parameterKey++; +} + +void PMBlobCylinder::setVSteps( int v ) +{ + if( v >= 4 ) + { + s_vStep = v; + if( s_pDefaultViewStructure ) + { + delete s_pDefaultViewStructure; + s_pDefaultViewStructure = 0; + } + } + else + kdDebug( PMArea ) << "PMBlobCylinder::setVSteps: V must be greater than 3\n"; + s_parameterKey++; +} + +void PMBlobCylinder::cleanUp( ) const +{ + if( s_pDefaultViewStructure ) + delete s_pDefaultViewStructure; + s_pDefaultViewStructure = 0; + if( s_pMetaObject ) + { + delete s_pMetaObject; + s_pMetaObject = 0; + } + Base::cleanUp( ); +} |