13 files changed, 50 insertions, 50 deletions
diff --git a/doc/kcachegrind/index.docbook b/doc/kcachegrind/index.docbook
index 434c89d7..85a19160 100644
--- a/doc/kcachegrind/index.docbook
+++ b/doc/kcachegrind/index.docbook
@@ -802,7 +802,7 @@ So, for example, for main(), you will always have a inclusive cost of almost 100
 <answer>
 <para>
 Obviously KCachegrind is wrongly installed on your system. It is recommended to compile it with the installation prefix to be your system wide KDE base directory like <command>configure --prefix=/opt/trinity; make install</command>.
-If you choose another directory like $HOME/kde, you should set the environment variable KDEDIR to this directory before running KCachegrind.
+If you choose another directory like $HOME/kde, you should set the environment variable TDEDIR to this directory before running KCachegrind.
 </para>
 </answer>
 </qandaentry>
diff --git a/doc/scripts/tdesvn-build/index.docbook b/doc/scripts/tdesvn-build/index.docbook
index da208d6f..e3026fcc 100644
--- a/doc/scripts/tdesvn-build/index.docbook
+++ b/doc/scripts/tdesvn-build/index.docbook
@@ -254,32 +254,32 @@ Open or create the <filename>.bash_profile</filename> file in the home directory
 and add to the end of the file:
 
 <programlisting>
-KDEDIR=(path to kdedir)
-KDEDIRS=$KDEDIR
-PATH=$KDEDIR/bin:$QTDIR/bin:$PATH
-LD_LIBRARY_PATH=$KDEDIR/lib:$LD_LIBRARY_PATH
-export KDEDIRS PATH LD_LIBRARY_PATH
+TDEDIR=(path to kdedir)
+TDEDIRS=$TDEDIR
+PATH=$TDEDIR/bin:$QTDIR/bin:$PATH
+LD_LIBRARY_PATH=$TDEDIR/lib:$LD_LIBRARY_PATH
+export TDEDIRS PATH LD_LIBRARY_PATH
 </programlisting>
 
 If you are building the qt-copy module, add instead:
 
 <programlisting>
 QTDIR=(path to qtdir)
-KDEDIR=(path to kdedir)
-KDEDIRS=$KDEDIR
-PATH=$KDEDIR/bin:$QTDIR/bin:$PATH
+TDEDIR=(path to kdedir)
+TDEDIRS=$TDEDIR
+PATH=$TDEDIR/bin:$QTDIR/bin:$PATH
 MANPATH=$QTDIR/doc/man:$MANPATH
-LD_LIBRARY_PATH=$KDEDIR/lib:$QTDIR/lib:$LD_LIBRARY_PATH
-export QTDIR KDEDIRS PATH MANPATH LD_LIBRARY_PATH
+LD_LIBRARY_PATH=$TDEDIR/lib:$QTDIR/lib:$LD_LIBRARY_PATH
+export QTDIR TDEDIRS PATH MANPATH LD_LIBRARY_PATH
 </programlisting>
 </para>
 
 <para>
-If you are not using a dedicated user, set a different <envar>$KDEHOME</envar> for your
+If you are not using a dedicated user, set a different <envar>$TDEHOME</envar> for your
 new environment in your <filename>.bash_profile</filename>:
 
 <programlisting>
-export KDEHOME="${HOME}/.kde-svn"
+export TDEHOME="${HOME}/.kde-svn"
 
 # Create it if needed
 [ ! -e ~/.kde-svn ] &amp;&amp; mkdir ~/.kde-svn
@@ -293,7 +293,7 @@ you may have to set the xdg environment variables in your <filename>.bash_profil
 
 <programlisting>
 XDG_CONFIG_DIRS="/etc/xdg"
-XDG_DATA_DIRS="${KDEDIR}/share:/usr/share"
+XDG_DATA_DIRS="${TDEDIR}/share:/usr/share"
 export XDG_CONFIG_DIRS XDG_DATA_DIRS
 </programlisting>
 
@@ -311,7 +311,7 @@ depending on the distribution) from the home directory, or create it if necessar
 line:
 
 <programlisting>
-exec ${KDEDIR}/bin/starttde
+exec ${TDEDIR}/bin/starttde
 </programlisting>
 </para>
 
@@ -420,7 +420,7 @@ source tree, you can force a rebuild of a module by creating a file called
 
 <listitem><para>
 You can specify various environment values to be used during the build,
-including <envar>KDEDIR</envar>, <envar>QTDIR</envar>, <envar>DO_NOT_COMPILE</envar>,
+including <envar>TDEDIR</envar>, <envar>QTDIR</envar>, <envar>DO_NOT_COMPILE</envar>,
 and <envar>CXXFLAGS</envar>.
 </para></listitem>
 
@@ -623,7 +623,7 @@ do any harm to enable it.  The default is to enable the patches.</entry>
 You can't override this setting in a module option.  The default value is
 <filename class="directory">/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin</filename>.  This environment
 variable should include the colon-separated paths of your development
-toolchain.  The paths <filename class="directory">$KDEDIR/bin</filename> and
+toolchain.  The paths <filename class="directory">$TDEDIR/bin</filename> and
 <filename class="directory">$QTDIR/bin</filename> are automatically added.  You
 may use the tilde (~) for any paths you add using this option.</para>
 </entry>
@@ -828,7 +828,7 @@ linkend="conf-make-install-prefix">make-install-prefix</link> option as well.</e
 <entry>Can't be overridden</entry>
 <entry>Set this option to set the environment variable LD_LIBRARY_PATH while
 building.  You can't override this setting in a module option.  The default
-value is blank, but the paths <filename class="directory">$KDEDIR/lib</filename> and
+value is blank, but the paths <filename class="directory">$TDEDIR/lib</filename> and
 <filename class="directory">$QTDIR/lib</filename> are automatically
 added.  You may use the tilde (~) for any paths you add using this option.
 </entry>
diff --git a/kbabel/kbabeldict/modules/dbsearchengine/KDBSearchEngine.cpp b/kbabel/kbabeldict/modules/dbsearchengine/KDBSearchEngine.cpp
index 69d1acce..4c79bacd 100644
--- a/kbabel/kbabeldict/modules/dbsearchengine/KDBSearchEngine.cpp
+++ b/kbabel/kbabeldict/modules/dbsearchengine/KDBSearchEngine.cpp
@@ -181,7 +181,7 @@ KDBSearchEngine::loadDatabase (TQString database, bool noask = false)
 				    "If you choose the old version, the new one will be removed. "
 				    "If you choose the new version, the old database files will be left alone "
 				    "and you need to remove them manually. Otherwise this message will be displayed "
-				    "again (the old files are at $KDEHOME/share/apps/kbabeldict/dbsearchengine/*,old).</p>"),
+				    "again (the old files are at $TDEHOME/share/apps/kbabeldict/dbsearchengine/*,old).</p>"),
 				   i18n ("Old Database Found"),
 				   i18n ("Use &Old Database"),
 				   i18n ("Use &New Database")) ==
diff --git a/kompare/tests/subversion/contextm.diff b/kompare/tests/subversion/contextm.diff
index fbb61263..507ed189 100644
--- a/kompare/tests/subversion/contextm.diff
+++ b/kompare/tests/subversion/contextm.diff
@@ -52,8 +52,8 @@ Index: README
 ! 
 ! 1. configure, build. Then go into the Vimpart subdirectory.
 ! 
-! 2. Include the current Vimpart directory in your KDEDIRS:
-! export KDEDIRS=`pwd`:$KDEDIR
+! 2. Include the current Vimpart directory in your TDEDIRS:
+! export TDEDIRS=`pwd`:$TDEDIR
 ! 
 ! 3. Symlink .libs to lib
 ! ln -s .libs lib
diff --git a/kompare/tests/subversion/normalm.diff b/kompare/tests/subversion/normalm.diff
index f526a3b0..47404ae8 100644
--- a/kompare/tests/subversion/normalm.diff
+++ b/kompare/tests/subversion/normalm.diff
@@ -46,8 +46,8 @@ Index: README
 < 
 < 1. configure, build. Then go into the Vimpart subdirectory.
 < 
-< 2. Include the current Vimpart directory in your KDEDIRS:
-< export KDEDIRS=`pwd`:$KDEDIR
+< 2. Include the current Vimpart directory in your TDEDIRS:
+< export TDEDIRS=`pwd`:$TDEDIR
 < 
 < 3. Symlink .libs to lib
 < ln -s .libs lib
diff --git a/kompare/tests/subversion/unifiedm.diff b/kompare/tests/subversion/unifiedm.diff
index 29a07705..267b1cb4 100644
--- a/kompare/tests/subversion/unifiedm.diff
+++ b/kompare/tests/subversion/unifiedm.diff
@@ -49,8 +49,8 @@ Index: README
 -
 -1. configure, build. Then go into the Vimpart subdirectory.
 -
--2. Include the current Vimpart directory in your KDEDIRS:
--export KDEDIRS=`pwd`:$KDEDIR
+-2. Include the current Vimpart directory in your TDEDIRS:
+-export TDEDIRS=`pwd`:$TDEDIR
 -
 -3. Symlink .libs to lib
 -ln -s .libs lib
diff --git a/scripts/kde-build b/scripts/kde-build
index 55cae0e5..de6f6c3b 100755
--- a/scripts/kde-build
+++ b/scripts/kde-build
@@ -43,7 +43,7 @@ err_configure_fail="3"
 err_compile_fail="4"
 
 # The installation of a module failed - this mostly happens if there's not
-# enough free disk space on the partition which $KDEDIRS is mounted to.
+# enough free disk space on the partition which $TDEDIRS is mounted to.
 #
 err_install_fail="5"
 
@@ -255,7 +255,7 @@ install_module() {
       [ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
     fi
     echo "$str_okay"
-    echo "Module $module successfully installed in $KDEDIRS!"
+    echo "Module $module successfully installed in $TDEDIRS!"
     move_logfile "finished"
   else
     echo "$str_error"
@@ -373,14 +373,14 @@ fi
 QTDIR=`echo "$QTDIR" | sed -e "s,^\~/,$HOME/,"`
 KDESRCDIR=`echo "$KDESRCDIR" | sed -e "s,^\~/,$HOME/,"`
 KDEBUILDDIR=`echo "$KDEBUILDDIR" |sed -e "s,^\~/,$HOME/,"`
-KDEDIRS=`echo "$KDEDIRS" |sed -e "s,^\~/,$HOME/,"`
+TDEDIRS=`echo "$TDEDIRS" |sed -e "s,^\~/,$HOME/,"`
 KDELOGDIR=`echo "$KDELOGDIR" |sed -e "s,^\~/,$HOME/,"`
 
 # Make sure some paths are according to the rc file. Note that there are AFAIK
 # UNIX flavors which don't support LD_LIBRARY_PATH
-PATH=$QTDIR/bin:$KDEDIRS/bin:$PATH
+PATH=$QTDIR/bin:$TDEDIRS/bin:$PATH
 MANPATH=$QTDIR/doc/man:$MANPATH
-LD_LIBRARY_PATH=$KDEDIRS/lib:$QTDIR/lib:$LD_LIBRARY_PATH
+LD_LIBRARY_PATH=$TDEDIRS/lib:$QTDIR/lib:$LD_LIBRARY_PATH
 
 if [ -n "$USE_UNSERMAKE" ]; then
   if [ -n "$MAKE" ]; then
@@ -471,14 +471,14 @@ fi
 # Clean the installation directory if selected.
 #
 if test "$INSTALLFROMSCRATCH" = yes && test -z "$specifiedModules" ; then
-  mkdir -p $KDEDIRS 2> /dev/null
-  if [ ! -w $KDEDIRS ]; then
+  mkdir -p $TDEDIRS 2> /dev/null
+  if [ ! -w $TDEDIRS ]; then
     echo "Enter the root password to clean the installation directory."
-    echo "WARNING: All files and directories in $KDEDIRS will be deleted!"
+    echo "WARNING: All files and directories in $TDEDIRS will be deleted!"
     echo -n "Please enter root "
-    eval "$cmd_sudo rm -rf $KDEDIRS/*"
+    eval "$cmd_sudo rm -rf $TDEDIRS/*"
   else
-    rm -rf $KDEDIRS/*
+    rm -rf $TDEDIRS/*
   fi
 fi
 
@@ -683,7 +683,7 @@ for module in $modules; do
     cmd_configure="./configure $CONFIGUREFLAGS --with-qt-dir=$QTDIR"
   fi
   if echo $CONFIGUREFLAGS | grep -v -- "--prefix=" 2>/dev/null >/dev/null; then
-    cmd_configure="$cmd_configure --prefix=$KDEDIRS"
+    cmd_configure="$cmd_configure --prefix=$TDEDIRS"
   fi
   [ "$NICECOMPILE" = yes ] && cmd_configure="nice $cmd_configure"
   configure_skipped=0
@@ -802,7 +802,7 @@ for module in $modules; do
     [ $critical -eq 0 ] && cmd_make_install="$cmd_make_install -k"
     [ "$NICECOMPILE" = yes ] && cmd_make_install="nice $cmd_make_install"
     cmd_make_install="$cmd_make_install install"
-    if [ ! -w $KDEDIRS ]; then
+    if [ ! -w $TDEDIRS ]; then
       eval "$cmd_sudo \"$cmd_make_install\""
     else
       install_module
diff --git a/scripts/kde-buildrc b/scripts/kde-buildrc
index c6f13d44..24553e01 100644
--- a/scripts/kde-buildrc
+++ b/scripts/kde-buildrc
@@ -14,7 +14,7 @@ KDEBUILDDIR=""
 
 # Where shall I put the binaries?
 #
-KDEDIRS="/opt/kde"
+TDEDIRS="/opt/kde"
 
 # Where is your Qt 3.3.x?
 #
diff --git a/scripts/kde-devel-vim.vim b/scripts/kde-devel-vim.vim
index 563ee41c..7b8961fe 100644
--- a/scripts/kde-devel-vim.vim
+++ b/scripts/kde-devel-vim.vim
@@ -16,13 +16,13 @@ set path=.,/usr/include,/usr/local/include,
 if $QTDIR != ''
     let &path = &path . $QTDIR . '/include/,'
 endif
-if $KDEDIR != ''
-    let &path = &path . $KDEDIR . '/include/,'
-    let &path = &path . $KDEDIR . '/include/arts/,'
+if $TDEDIR != ''
+    let &path = &path . $TDEDIR . '/include/,'
+    let &path = &path . $TDEDIR . '/include/arts/,'
 endif
-if $KDEDIRS != ''
-    let &path = &path . substitute( $KDEDIRS, '\(:\|$\)', '/include,', 'g' )
-    let &path = &path . substitute( $KDEDIRS, '\(:\|$\)', '/include/arts,', 'g' )
+if $TDEDIRS != ''
+    let &path = &path . substitute( $TDEDIRS, '\(:\|$\)', '/include,', 'g' )
+    let &path = &path . substitute( $TDEDIRS, '\(:\|$\)', '/include/arts,', 'g' )
 endif
 set path+=,
 
diff --git a/scripts/kdedoc b/scripts/kdedoc
index 0a8191d2..f61a8452 100755
--- a/scripts/kdedoc
+++ b/scripts/kdedoc
@@ -6,7 +6,7 @@
 # You can edit this line to set the directory holding your KDE docs, or you
 # can use the environment variable KDEDOCS to avoid future conflicts with this
 # file if the default changes.
-KDEDOCS=${KDEDOCS:-"$KDEDIR/share/doc/HTML/en/tdelibs-apidocs"}
+KDEDOCS=${KDEDOCS:-"$TDEDIR/share/doc/HTML/en/tdelibs-apidocs"}
 
 if [ $# = 1 ]; then
   if [ -e "$KDEDOCS/doxygen.css" ]; then
diff --git a/scripts/tdesvn-build b/scripts/tdesvn-build
index fb81ac67..99911ece 100755
--- a/scripts/tdesvn-build
+++ b/scripts/tdesvn-build
@@ -3461,7 +3461,7 @@ sub update_module_environment
 
     setenv ('LD_LIBRARY_PATH', $libdir);
     setenv ('PATH', $path);
-    setenv ('KDEDIR', $kdedir);
+    setenv ('TDEDIR', $kdedir);
     setenv ('QTDIR', $qtdir);
 
     # Qt has several defines of its own.  Special case qt-copy for this
diff --git a/scripts/tdesvn-buildrc-sample b/scripts/tdesvn-buildrc-sample
index 2d8b9bac..f39ae662 100644
--- a/scripts/tdesvn-buildrc-sample
+++ b/scripts/tdesvn-buildrc-sample
@@ -69,8 +69,8 @@ global
 #
 # You can overwrite the installation directory for a given module using
 # the per-module "prefix" option. Note that when doing this you need to
-# set KDEDIRS, PATH and LD_LIBRARY_PATH to point to both directories,
-# and that you should use separate test users or KDEHOME values to separate
+# set TDEDIRS, PATH and LD_LIBRARY_PATH to point to both directories,
+# and that you should use separate test users or TDEHOME values to separate
 # the ksycoca databases. Only set prefix if you know what you're doing.
 
 # If you would like install KDE to the system (DO NOT INSTALL *over* a prior
diff --git a/scripts/tdesvn-buildrc.xml b/scripts/tdesvn-buildrc.xml
index d6b915b1..547950d3 100644
--- a/scripts/tdesvn-buildrc.xml
+++ b/scripts/tdesvn-buildrc.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE language SYSTEM "language.dtd">
-<!-- This goes into $KDEDIR/share/apps/katepart/syntax, or
-     it can go to $KDEHOME/share/apps/katepart/syntax
+<!-- This goes into $TDEDIR/share/apps/katepart/syntax, or
+     it can go to $TDEHOME/share/apps/katepart/syntax
  -->
 <language name="tdesvn-buildrc" version="0.2" kateversion="2.4" section="Configuration" extensions=".tdesvn-buildrc;tdesvn-buildrc" author="Michael Pyne &lt;[email protected]&gt;" license="LGPL">