Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731

1 files changed, 960 insertions, 0 deletions

diff --git a/src/kernel/qrect.cpp b/src/kernel/qrect.cpp
new file mode 100644
index 000000000..2410c94c0
--- /dev/null
+++ b/src/kernel/qrect.cpp
@@ -0,0 +1,960 @@
+/****************************************************************************
+**
+** Implementation of TQRect class
+**
+** Created : 931028
+**
+** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
+**
+** This file is part of the kernel module of the TQt GUI Toolkit.
+**
+** This file may be used under the terms of the GNU General
+** Public License versions 2.0 or 3.0 as published by the Free
+** Software Foundation and appearing in the files LICENSE.GPL2
+** and LICENSE.GPL3 included in the packaging of this file.
+** Alternatively you may (at your option) use any later version
+** of the GNU General Public License if such license has been
+** publicly approved by Trolltech ASA (or its successors, if any)
+** and the KDE Free TQt Foundation.
+**
+** Please review the following information to ensure GNU General
+** Public Licensing retquirements will be met:
+** http://trolltech.com/products/qt/licenses/licensing/opensource/.
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
+** or contact the sales department at [email protected].
+**
+** This file may be used under the terms of the Q Public License as
+** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
+** included in the packaging of this file.  Licensees holding valid TQt
+** Commercial licenses may use this file in accordance with the TQt
+** Commercial License Agreement provided with the Software.
+**
+** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
+** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
+** herein.
+**
+**********************************************************************/
+
+#define	 TQRECT_C
+#include "qrect.h"
+#include "qdatastream.h"
+
+/*!
+    \class TQRect
+    \brief The TQRect class defines a rectangle in the plane.
+
+    \ingroup images
+    \ingroup graphics
+    \mainclass
+
+    A rectangle is internally represented as an upper-left corner and
+    a bottom-right corner, but it is normally expressed as an
+    upper-left corner and a size.
+
+    The coordinate type is TQCOORD (defined in \c qwindowdefs.h as \c
+    int). The minimum value of TQCOORD is TQCOORD_MIN (-2147483648) and
+    the maximum value is  TQCOORD_MAX (2147483647).
+
+    Note that the size (width and height) of a rectangle might be
+    different from what you are used to. If the top-left corner and
+    the bottom-right corner are the same, the height and the width of
+    the rectangle will both be 1.
+
+    Generally, \e{width = right - left + 1} and \e{height = bottom -
+    top + 1}. We designed it this way to make it correspond to
+    rectangular spaces used by drawing functions in which the width
+    and height denote a number of pixels. For example, drawing a
+    rectangle with width and height 1 draws a single pixel.
+
+    The default coordinate system has origin (0, 0) in the top-left
+    corner. The positive direction of the y axis is down, and the
+    positive x axis is from left to right.
+
+    A TQRect can be constructed with a set of left, top, width and
+    height integers, from two TQPoints or from a TQPoint and a TQSize.
+    After creation the dimensions can be changed, e.g. with setLeft(),
+    setRight(), setTop() and setBottom(), or by setting sizes, e.g.
+    setWidth(), setHeight() and setSize(). The dimensions can also be
+    changed with the move functions, e.g. moveBy(), moveCenter(),
+    moveBottomRight(), etc. You can also add coordinates to a
+    rectangle with addCoords().
+
+    You can test to see if a TQRect contains a specific point with
+    contains(). You can also test to see if two TQRects intersect with
+    intersects() (see also intersect()). To get the bounding rectangle
+    of two TQRects use unite().
+
+    \sa TQPoint, TQSize
+*/
+
+
+/*****************************************************************************
+  TQRect member functions
+ *****************************************************************************/
+
+/*!
+    \fn TQRect::TQRect()
+
+    Constructs an invalid rectangle.
+*/
+
+/*!
+    Constructs a rectangle with \a topLeft as the top-left corner and
+    \a bottomRight as the bottom-right corner.
+*/
+
+TQRect::TQRect( const TQPoint &topLeft, const TQPoint &bottomRight )
+{
+    x1 = (TQCOORD)topLeft.x();
+    y1 = (TQCOORD)topLeft.y();
+    x2 = (TQCOORD)bottomRight.x();
+    y2 = (TQCOORD)bottomRight.y();
+}
+
+/*!
+    Constructs a rectangle with \a topLeft as the top-left corner and
+    \a size as the rectangle size.
+*/
+
+TQRect::TQRect( const TQPoint &topLeft, const TQSize &size )
+{
+    x1 = (TQCOORD)topLeft.x();
+    y1 = (TQCOORD)topLeft.y();
+    x2 = (TQCOORD)(x1+size.width()-1);
+    y2 = (TQCOORD)(y1+size.height()-1);
+}
+
+/*!
+    \fn TQRect::TQRect( int left, int top, int width, int height )
+
+    Constructs a rectangle with the \a top, \a left corner and \a
+    width and \a height.
+
+    Example (creates three identical rectangles):
+    \code
+	TQRect r1( TQPoint(100,200), TQPoint(110,215) );
+	TQRect r2( TQPoint(100,200), TQSize(11,16) );
+	TQRect r3( 100, 200, 11, 16 );
+    \endcode
+*/
+
+
+/*!
+    \fn bool TQRect::isNull() const
+
+    Returns TRUE if the rectangle is a null rectangle; otherwise
+    returns FALSE.
+
+    A null rectangle has both the width and the height set to 0, that
+    is right() == left() - 1 and bottom() == top() - 1.
+
+    Note that if right() == left() and bottom() == top(), then the
+    rectangle has width 1 and height 1.
+
+    A null rectangle is also empty.
+
+    A null rectangle is not valid.
+
+    \sa isEmpty(), isValid()
+*/
+
+/*!
+    \fn bool TQRect::isEmpty() const
+
+    Returns TRUE if the rectangle is empty; otherwise returns FALSE.
+
+    An empty rectangle has a left() \> right() or top() \> bottom().
+
+    An empty rectangle is not valid. \c{isEmpty() == !isValid()}
+
+    \sa isNull(), isValid(), normalize()
+*/
+
+/*!
+    \fn bool TQRect::isValid() const
+
+    Returns TRUE if the rectangle is valid; otherwise returns FALSE.
+
+    A valid rectangle has a left() \<= right() and top() \<= bottom().
+
+    Note that non-trivial operations like intersections are not defined
+    for invalid rectangles.
+
+    \c{isValid() == !isEmpty()}
+
+    \sa isNull(), isEmpty(), normalize()
+*/
+
+
+/*!
+    Returns a normalized rectangle, i.e. a rectangle that has a
+    non-negative width and height.
+
+    It swaps left and right if left() \> right(), and swaps top and
+    bottom if top() \> bottom().
+
+    \sa isValid()
+*/
+
+TQRect TQRect::normalize() const
+{
+    TQRect r;
+    if ( x2 < x1 ) {				// swap bad x values
+	r.x1 = x2;
+	r.x2 = x1;
+    } else {
+	r.x1 = x1;
+	r.x2 = x2;
+    }
+    if ( y2 < y1 ) {				// swap bad y values
+	r.y1 = y2;
+	r.y2 = y1;
+    } else {
+	r.y1 = y1;
+	r.y2 = y2;
+    }
+    return r;
+}
+
+
+/*!
+    \fn int TQRect::left() const
+
+    Returns the left coordinate of the rectangle. Identical to x().
+
+    \sa setLeft(), right(), topLeft(), bottomLeft()
+*/
+
+/*!
+    \fn int TQRect::top() const
+
+    Returns the top coordinate of the rectangle. Identical to y().
+
+    \sa setTop(), bottom(), topLeft(), topRight()
+*/
+
+/*!
+    \fn int TQRect::right() const
+
+    Returns the right coordinate of the rectangle.
+
+    \sa setRight(), left(), topRight(), bottomRight()
+*/
+
+/*!
+    \fn int TQRect::bottom() const
+
+    Returns the bottom coordinate of the rectangle.
+
+    \sa setBottom(), top(), bottomLeft(), bottomRight()
+*/
+
+/*!
+    \fn TQCOORD &TQRect::rLeft()
+
+    Returns a reference to the left coordinate of the rectangle.
+
+    \sa rTop(), rRight(), rBottom()
+*/
+
+/*!
+    \fn TQCOORD &TQRect::rTop()
+
+    Returns a reference to the top coordinate of the rectangle.
+
+    \sa rLeft(),  rRight(), rBottom()
+*/
+
+/*!
+    \fn TQCOORD &TQRect::rRight()
+
+    Returns a reference to the right coordinate of the rectangle.
+
+    \sa rLeft(), rTop(), rBottom()
+*/
+
+/*!
+    \fn TQCOORD &TQRect::rBottom()
+
+    Returns a reference to the bottom coordinate of the rectangle.
+
+    \sa rLeft(), rTop(), rRight()
+*/
+
+/*!
+    \fn int TQRect::x() const
+
+    Returns the left coordinate of the rectangle. Identical to left().
+
+    \sa left(), y(), setX()
+*/
+
+/*!
+    \fn int TQRect::y() const
+
+    Returns the top coordinate of the rectangle. Identical to top().
+
+    \sa top(), x(), setY()
+*/
+
+/*!
+    \fn void TQRect::setLeft( int pos )
+
+    Sets the left edge of the rectangle to \a pos. May change the
+    width, but will never change the right edge of the rectangle.
+
+    Identical to setX().
+
+    \sa left(), setTop(), setWidth()
+*/
+
+/*!
+    \fn void TQRect::setTop( int pos )
+
+    Sets the top edge of the rectangle to \a pos. May change the
+    height, but will never change the bottom edge of the rectangle.
+
+    Identical to setY().
+
+    \sa top(), setBottom(), setHeight()
+*/
+
+/*!
+    \fn void TQRect::setRight( int pos )
+
+    Sets the right edge of the rectangle to \a pos. May change the
+    width, but will never change the left edge of the rectangle.
+
+    \sa right(), setLeft(), setWidth()
+*/
+
+/*!
+    \fn void TQRect::setBottom( int pos )
+
+    Sets the bottom edge of the rectangle to \a pos. May change the
+    height, but will never change the top edge of the rectangle.
+
+    \sa bottom(), setTop(), setHeight()
+*/
+
+/*!
+    \fn void TQRect::setX( int x )
+
+    Sets the x position of the rectangle (its left end) to \a x. May
+    change the width, but will never change the right edge of the
+    rectangle.
+
+    Identical to setLeft().
+
+    \sa x(), setY()
+*/
+
+/*!
+    \fn void TQRect::setY( int y )
+
+    Sets the y position of the rectangle (its top) to \a y. May change
+    the height, but will never change the bottom edge of the
+    rectangle.
+
+    Identical to setTop().
+
+    \sa y(), setX()
+*/
+
+/*!
+    Set the top-left corner of the rectangle to \a p. May change
+    the size, but will the never change the bottom-right corner of
+    the rectangle.
+
+    \sa topLeft(), moveTopLeft(), setBottomRight(), setTopRight(), setBottomLeft()
+*/
+void TQRect::setTopLeft( const TQPoint &p )
+{
+    setLeft( p.x() );
+    setTop( p.y() );
+}
+
+/*!
+    Set the bottom-right corner of the rectangle to \a p. May change
+    the size, but will the never change the top-left corner of
+    the rectangle.
+
+    \sa bottomRight(), moveBottomRight(), setTopLeft(), setTopRight(), setBottomLeft()
+*/
+void TQRect::setBottomRight( const TQPoint &p )
+{
+    setRight( p.x() );
+    setBottom( p.y() );
+}
+
+/*!
+    Set the top-right corner of the rectangle to \a p. May change
+    the size, but will the never change the bottom-left corner of
+    the rectangle.
+
+    \sa topRight(), moveTopRight(), setTopLeft(), setBottomRight(), setBottomLeft()
+*/
+void TQRect::setTopRight( const TQPoint &p )
+{
+    setRight( p.x() );
+    setTop( p.y() );
+}
+
+/*!
+    Set the bottom-left corner of the rectangle to \a p. May change
+    the size, but will the never change the top-right corner of
+    the rectangle.
+
+    \sa bottomLeft(), moveBottomLeft(), setTopLeft(), setBottomRight(), setTopRight()
+*/
+void TQRect::setBottomLeft( const TQPoint &p )
+{
+    setLeft( p.x() );
+    setBottom( p.y() );
+}
+
+/*!
+    \fn TQPoint TQRect::topLeft() const
+
+    Returns the top-left position of the rectangle.
+
+    \sa setTopLeft(), moveTopLeft(), bottomRight(), left(), top()
+*/
+
+/*!
+    \fn TQPoint TQRect::bottomRight() const
+
+    Returns the bottom-right position of the rectangle.
+
+    \sa setBottomRight(), moveBottomRight(), topLeft(), right(), bottom()
+*/
+
+/*!
+    \fn TQPoint TQRect::topRight() const
+
+    Returns the top-right position of the rectangle.
+
+    \sa setTopRight(), moveTopRight(), bottomLeft(), top(), right()
+*/
+
+/*!
+    \fn TQPoint TQRect::bottomLeft() const
+
+    Returns the bottom-left position of the rectangle.
+
+    \sa setBottomLeft(), moveBottomLeft(), topRight(), bottom(), left()
+*/
+
+/*!
+    \fn TQPoint TQRect::center() const
+
+    Returns the center point of the rectangle.
+
+    \sa moveCenter(), topLeft(), bottomRight(), topRight(), bottomLeft()
+*/
+
+
+/*!
+    Extracts the rectangle parameters as the position \a *x, \a *y and
+    width \a *w and height \a *h.
+
+    \sa setRect(), coords()
+*/
+
+void TQRect::rect( int *x, int *y, int *w, int *h ) const
+{
+    *x = x1;
+    *y = y1;
+    *w = x2-x1+1;
+    *h = y2-y1+1;
+}
+
+/*!
+    Extracts the rectangle parameters as the top-left point \a *xp1,
+    \a *yp1 and the bottom-right point \a *xp2, \a *yp2.
+
+    \sa setCoords(), rect()
+*/
+
+void TQRect::coords( int *xp1, int *yp1, int *xp2, int *yp2 ) const
+{
+    *xp1 = x1;
+    *yp1 = y1;
+    *xp2 = x2;
+    *yp2 = y2;
+}
+
+
+/*!
+    Sets the left position of the rectangle to \a pos, leaving the
+    size unchanged.
+
+    \sa left(), setLeft(), moveTop(), moveRight(), moveBottom()
+*/
+void TQRect::moveLeft( int pos )
+{
+    x2 += (TQCOORD)(pos - x1);
+    x1 = (TQCOORD)pos;
+}
+
+/*!
+    Sets the top position of the rectangle to \a pos, leaving the
+    size unchanged.
+
+    \sa top(), setTop(), moveLeft(), moveRight(), moveBottom()
+*/
+
+void TQRect::moveTop( int pos )
+{
+    y2 += (TQCOORD)(pos - y1);
+    y1 = (TQCOORD)pos;
+}
+
+/*!
+    Sets the right position of the rectangle to \a pos, leaving the
+    size unchanged.
+
+    \sa right(), setRight(), moveLeft(), moveTop(), moveBottom()
+*/
+
+void TQRect::moveRight( int pos )
+{
+    x1 += (TQCOORD)(pos - x2);
+    x2 = (TQCOORD)pos;
+}
+
+/*!
+    Sets the bottom position of the rectangle to \a pos, leaving the
+    size unchanged.
+
+    \sa bottom(), setBottom(), moveLeft(), moveTop(), moveRight()
+*/
+
+void TQRect::moveBottom( int pos )
+{
+    y1 += (TQCOORD)(pos - y2);
+    y2 = (TQCOORD)pos;
+}
+
+/*!
+    Sets the top-left position of the rectangle to \a p, leaving the
+    size unchanged.
+
+    \sa topLeft(), setTopLeft(), moveBottomRight(), moveTopRight(), moveBottomLeft()
+*/
+
+void TQRect::moveTopLeft( const TQPoint &p )
+{
+    moveLeft( p.x() );
+    moveTop( p.y() );
+}
+
+/*!
+    Sets the bottom-right position of the rectangle to \a p, leaving
+    the size unchanged.
+
+    \sa bottomRight(), setBottomRight(), moveTopLeft(), moveTopRight(), moveBottomLeft()
+*/
+
+void TQRect::moveBottomRight( const TQPoint &p )
+{
+    moveRight( p.x() );
+    moveBottom( p.y() );
+}
+
+/*!
+    Sets the top-right position of the rectangle to \a p, leaving the
+    size unchanged.
+
+    \sa topRight(), setTopRight(), moveTopLeft(), moveBottomRight(), moveBottomLeft()
+*/
+
+void TQRect::moveTopRight( const TQPoint &p )
+{
+    moveRight( p.x() );
+    moveTop( p.y() );
+}
+
+/*!
+    Sets the bottom-left position of the rectangle to \a p, leaving
+    the size unchanged.
+
+    \sa bottomLeft(), setBottomLeft(), moveTopLeft(), moveBottomRight(), moveTopRight()
+*/
+
+void TQRect::moveBottomLeft( const TQPoint &p )
+{
+    moveLeft( p.x() );
+    moveBottom( p.y() );
+}
+
+
+/*!
+    Sets the center point of the rectangle to \a p, leaving the size
+    unchanged.
+
+    \sa center(), moveTopLeft(), moveBottomRight(), moveTopRight(), moveBottomLeft()
+*/
+
+void TQRect::moveCenter( const TQPoint &p )
+{
+    TQCOORD w = x2 - x1;
+    TQCOORD h = y2 - y1;
+    x1 = (TQCOORD)(p.x() - w/2);
+    y1 = (TQCOORD)(p.y() - h/2);
+    x2 = x1 + w;
+    y2 = y1 + h;
+}
+
+
+/*!
+    Moves the rectangle \a dx along the x axis and \a dy along the y
+    axis, relative to the current position. Positive values move the
+    rectangle to the right and down.
+
+    \sa moveTopLeft()
+*/
+
+void TQRect::moveBy( int dx, int dy )
+{
+    x1 += (TQCOORD)dx;
+    y1 += (TQCOORD)dy;
+    x2 += (TQCOORD)dx;
+    y2 += (TQCOORD)dy;
+}
+
+/*!
+    Sets the coordinates of the rectangle's top-left corner to \a (x,
+    y), and its size to \a (w, h).
+
+    \sa rect(), setCoords()
+*/
+
+void TQRect::setRect( int x, int y, int w, int h )
+{
+    x1 = (TQCOORD)x;
+    y1 = (TQCOORD)y;
+    x2 = (TQCOORD)(x+w-1);
+    y2 = (TQCOORD)(y+h-1);
+}
+
+/*!
+    Sets the coordinates of the rectangle's top-left corner to \a
+    (xp1, yp1), and the coordinates of its bottom-right corner to \a
+    (xp2, yp2).
+
+    \sa coords(), setRect()
+*/
+
+void TQRect::setCoords( int xp1, int yp1, int xp2, int yp2 )
+{
+    x1 = (TQCOORD)xp1;
+    y1 = (TQCOORD)yp1;
+    x2 = (TQCOORD)xp2;
+    y2 = (TQCOORD)yp2;
+}
+
+/*!
+    Adds \a xp1, \a yp1, \a xp2 and \a yp2 respectively to the
+    existing coordinates of the rectangle.
+*/
+
+void TQRect::addCoords( int xp1, int yp1, int xp2, int yp2 )
+{
+    x1 += (TQCOORD)xp1;
+    y1 += (TQCOORD)yp1;
+    x2 += (TQCOORD)xp2;
+    y2 += (TQCOORD)yp2;
+}
+
+/*!
+    \fn TQSize TQRect::size() const
+
+    Returns the size of the rectangle.
+
+    \sa width(), height()
+*/
+
+/*!
+    \fn int TQRect::width() const
+
+    Returns the width of the rectangle. The width includes both the
+    left and right edges, i.e. width = right - left + 1.
+
+    \sa height(), size(), setHeight()
+*/
+
+/*!
+    \fn int TQRect::height() const
+
+    Returns the height of the rectangle. The height includes both the
+    top and bottom edges, i.e. height = bottom - top + 1.
+
+    \sa width(), size(), setHeight()
+*/
+
+/*!
+    Sets the width of the rectangle to \a w. The right edge is
+    changed, but not the left edge.
+
+    \sa width(), setLeft(), setRight(), setSize()
+*/
+
+void TQRect::setWidth( int w )
+{
+    x2 = (TQCOORD)(x1 + w - 1);
+}
+
+/*!
+    Sets the height of the rectangle to \a h. The top edge is not
+    moved, but the bottom edge may be moved.
+
+    \sa height(), setTop(), setBottom(), setSize()
+*/
+
+void TQRect::setHeight( int h )
+{
+    y2 = (TQCOORD)(y1 + h - 1);
+}
+
+/*!
+    Sets the size of the rectangle to \a s. The top-left corner is not
+    moved.
+
+    \sa size(), setWidth(), setHeight()
+*/
+
+void TQRect::setSize( const TQSize &s )
+{
+    x2 = (TQCOORD)(s.width() +x1-1);
+    y2 = (TQCOORD)(s.height()+y1-1);
+}
+
+/*!
+    Returns TRUE if the point \a p is inside or on the edge of the
+    rectangle; otherwise returns FALSE.
+
+    If \a proper is TRUE, this function returns TRUE only if \a p is
+    inside (not on the edge).
+*/
+
+bool TQRect::contains( const TQPoint &p, bool proper ) const
+{
+    if ( proper )
+	return p.x() > x1 && p.x() < x2 &&
+	       p.y() > y1 && p.y() < y2;
+    else
+	return p.x() >= x1 && p.x() <= x2 &&
+	       p.y() >= y1 && p.y() <= y2;
+}
+
+/*!
+    \overload bool TQRect::contains( int x, int y, bool proper ) const
+
+    Returns TRUE if the point \a x, \a y is inside this rectangle;
+    otherwise returns FALSE.
+
+    If \a proper is TRUE, this function returns TRUE only if the point
+    is entirely inside (not on the edge).
+*/
+
+/*!
+    \overload bool TQRect::contains( int x, int y ) const
+
+    Returns TRUE if the point \a x, \a y is inside this rectangle;
+    otherwise returns FALSE.
+*/
+
+/*!
+    \overload
+
+    Returns TRUE if the rectangle \a r is inside this rectangle;
+    otherwise returns FALSE.
+
+    If \a proper is TRUE, this function returns TRUE only if \a r is
+    entirely inside (not on the edge).
+
+    \sa unite(), intersect(), intersects()
+*/
+
+bool TQRect::contains( const TQRect &r, bool proper ) const
+{
+    if ( proper )
+	return r.x1 > x1 && r.x2 < x2 && r.y1 > y1 && r.y2 < y2;
+    else
+	return r.x1 >= x1 && r.x2 <= x2 && r.y1 >= y1 && r.y2 <= y2;
+}
+
+/*!
+    Unites this rectangle with rectangle \a r.
+*/
+TQRect& TQRect::operator|=(const TQRect &r)
+{
+    *this = *this | r;
+    return *this;
+}
+
+/*!
+    Intersects this rectangle with rectangle \a r.
+*/
+TQRect& TQRect::operator&=(const TQRect &r)
+{
+    *this = *this & r;
+    return *this;
+}
+
+
+/*!
+    Returns the bounding rectangle of this rectangle and rectangle \a
+    r.
+
+    The bounding rectangle of a nonempty rectangle and an empty or
+    invalid rectangle is defined to be the nonempty rectangle.
+
+    \sa operator|=(), operator&(), intersects(), contains()
+*/
+
+TQRect TQRect::operator|(const TQRect &r) const
+{
+    if ( isValid() ) {
+	if ( r.isValid() ) {
+	    TQRect tmp;
+	    tmp.setLeft(   TQMIN( x1, r.x1 ) );
+	    tmp.setRight(  TQMAX( x2, r.x2 ) );
+	    tmp.setTop(	   TQMIN( y1, r.y1 ) );
+	    tmp.setBottom( TQMAX( y2, r.y2 ) );
+	    return tmp;
+	} else {
+	    return *this;
+	}
+    } else {
+	return r;
+    }
+}
+
+/*!
+    Returns the bounding rectangle of this rectangle and rectangle \a
+    r. \c{r.unite(s)} is equivalent to \c{r|s}.
+*/
+TQRect TQRect::unite( const TQRect &r ) const
+{
+    return *this | r;
+}
+
+
+/*!
+    Returns the intersection of this rectangle and rectangle \a r.
+
+    Returns an empty rectangle if there is no intersection.
+
+    \sa operator&=(), operator|(), isEmpty(), intersects(), contains()
+*/
+
+TQRect TQRect::operator&( const TQRect &r ) const
+{
+    TQRect tmp;
+    tmp.x1 = TQMAX( x1, r.x1 );
+    tmp.x2 = TQMIN( x2, r.x2 );
+    tmp.y1 = TQMAX( y1, r.y1 );
+    tmp.y2 = TQMIN( y2, r.y2 );
+    return tmp;
+}
+
+/*!
+    Returns the intersection of this rectangle and rectangle \a r.
+    \c{r.intersect(s)} is equivalent to \c{r&s}.
+*/
+TQRect TQRect::intersect( const TQRect &r ) const
+{
+    return *this & r;
+}
+
+/*!
+    Returns TRUE if this rectangle intersects with rectangle \a r
+    (there is at least one pixel that is within both rectangles);
+    otherwise returns FALSE.
+
+    \sa intersect(), contains()
+*/
+
+bool TQRect::intersects( const TQRect &r ) const
+{
+    return ( TQMAX( x1, r.x1 ) <= TQMIN( x2, r.x2 ) &&
+	     TQMAX( y1, r.y1 ) <= TQMIN( y2, r.y2 ) );
+}
+
+
+/*!
+    \relates TQRect
+
+    Returns TRUE if \a r1 and \a r2 are equal; otherwise returns FALSE.
+*/
+
+bool operator==( const TQRect &r1, const TQRect &r2 )
+{
+    return r1.x1==r2.x1 && r1.x2==r2.x2 && r1.y1==r2.y1 && r1.y2==r2.y2;
+}
+
+/*!
+    \relates TQRect
+
+    Returns TRUE if \a r1 and \a r2 are different; otherwise returns FALSE.
+*/
+
+bool operator!=( const TQRect &r1, const TQRect &r2 )
+{
+    return r1.x1!=r2.x1 || r1.x2!=r2.x2 || r1.y1!=r2.y1 || r1.y2!=r2.y2;
+}
+
+
+/*****************************************************************************
+  TQRect stream functions
+ *****************************************************************************/
+#ifndef QT_NO_DATASTREAM
+/*!
+    \relates TQRect
+
+    Writes the TQRect, \a r, to the stream \a s, and returns a
+    reference to the stream.
+
+    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
+*/
+
+TQDataStream &operator<<( TQDataStream &s, const TQRect &r )
+{
+    if ( s.version() == 1 )
+	s << (Q_INT16)r.left() << (Q_INT16)r.top()
+	  << (Q_INT16)r.right() << (Q_INT16)r.bottom();
+    else
+	s << (Q_INT32)r.left() << (Q_INT32)r.top()
+	  << (Q_INT32)r.right() << (Q_INT32)r.bottom();
+    return s;
+}
+
+/*!
+    \relates TQRect
+
+    Reads a TQRect from the stream \a s into rect \a r and returns a
+    reference to the stream.
+
+    \sa \link datastreamformat.html Format of the TQDataStream operators \endlink
+*/
+
+TQDataStream &operator>>( TQDataStream &s, TQRect &r )
+{
+    if ( s.version() == 1 ) {
+	Q_INT16 x1, y1, x2, y2;
+	s >> x1; s >> y1; s >> x2; s >> y2;
+	r.setCoords( x1, y1, x2, y2 );
+    }
+    else {
+	Q_INT32 x1, y1, x2, y2;
+	s >> x1; s >> y1; s >> x2; s >> y2;
+	r.setCoords( x1, y1, x2, y2 );
+    }
+    return s;
+}
+#endif // QT_NO_DATASTREAM