/**************************************************************************** ** ** Help with porting from TQt 2.x to TQt 3.x ** ** Copyright (C) 1992-2008 Trolltech ASA. All rights reserved. ** ** This file is part of the TQt GUI Toolkit. ** ** This file may be used under the terms of the GNU General ** Public License versions 2.0 or 3.0 as published by the Free ** Software Foundation and appearing in the files LICENSE.GPL2 ** and LICENSE.GPL3 included in the packaging of this file. ** Alternatively you may (at your option) use any later version ** of the GNU General Public License if such license has been ** publicly approved by Trolltech ASA (or its successors, if any) ** and the KDE Free TQt Foundation. ** ** Please review the following information to ensure GNU General ** Public Licensing requirements will be met: ** http://trolltech.com/products/qt/licenses/licensing/opensource/. ** If you are unsure which license is appropriate for your use, please ** review the following information: ** http://trolltech.com/products/qt/licenses/licensing/licensingoverview ** or contact the sales department at sales@trolltech.com. ** ** This file may be used under the terms of the Q Public License as ** defined by Trolltech ASA and appearing in the file LICENSE.QPL ** included in the packaging of this file. Licensees holding valid Qt ** Commercial licenses may use this file in accordance with the Qt ** Commercial License Agreement provided with the Software. ** ** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, ** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted ** herein. ** **********************************************************************/ /*! \page porting.html \title Porting to TQt 3.x This document describes porting applications from TQt 2.x to TQt 3.x. The TQt 3.x series is not binary compatible with the 2.x series. This means programs compiled for TQt 2.x must be recompiled to work with Qt 3.x. TQt 3.x is also not completely \e source compatible with 2.x, however all points of incompatibility cause compiler errors or run-time messages (rather than mysterious results). TQt 3.x includes many additional features and discards obsolete functionality. Porting from TQt 2.x to TQt 3.x is straightforward, and once completed makes the considerable additional power and flexibility of TQt 3.x available for use in your applications. To port code from TQt 2.x to TQt 3.x: \list 1 \i Briefly read the porting notes below to get an idea of what to expect. \i Be sure your code compiles and runs well on all your target platforms with TQt 2.x. \i Recompile with TQt 3.x. For each error, search below for related identifiers (e.g. function names, class names). This document mentions all relevant identifiers to help you get the information you need at the cost of being a little verbose. \i If you get stuck, ask on the \link http://qt-interest.trolltech.com/ qt-interest \endlink mailing list, or Trolltech Technical Support if you're a registered licensee. \endlist Table of contents: \tableofcontents \target Linkerrors \section1 Link Errors on Windows On Windows, originally in TQt 2.x, the default configuration of the Qt library is static. If you just use the default configuration you don't need to set certain preprocessor defines. In TQt 3.0, the default configuration of the TQt library is to build it as a shared library, therefore the preprocessor define \c QT_DLL is needed. If you use tmake with TQt 2.x, and now use qmake with TQt 3.x, then the cause of the problem is with the project file. In the project file, there is usually line that looks like: \c CONFIG = ... this should be changed to \c CONFIG += ... so that qmake can look at the configuration that TQt was built with and set any relevant preprocessor defines in the makefile. \target Headers \section1 Header file inclusion changes Qt 3.x remove some unnecessary nested #include directives from header files. This speeds up compilation when you don't need those nested header files. But in some cases you will find you need to add an extra #include to your files. For example, if you get a message about QStringList or its functions not being defined, then add \c {#include } at the top of the file giving the error. Header files that you might need to add #include directives for include: \list \i \c \i \c \i \c \i \c \i \c \i \c \i \c \i \c \endlist \section1 Namespace Qt 3.x is namespace clean. A few global identifiers that had been left in TQt 2.x have been discarded. Enumeration \l Qt::CursorShape and its values are now part of the special \c TQt class defined in ntqnamespace.h. If you get compilation errors about these being missing (unlikely, since most of your code will be in classes that inherit from the TQt namespace class), then apply the following changes: \list \i \c QCursorShape becomes \c Qt::CursorShape \i \c ArrowCursor becomes \c Qt::ArrowCursor \i \c UpArrowCursor becomes \c Qt::UpArrowCursor \i \c CrossCursor becomes \c Qt::CrossCursor \i \c WaitCursor becomes \c Qt::WaitCursor \i \c IbeamCursor becomes \c Qt::IbeamCursor \i \c SizeVerCursor becomes \c Qt::SizeVerCursor \i \c SizeHorCursor becomes \c Qt::SizeHorCursor \i \c SizeBDiagCursor becomes \c Qt::SizeBDiagCursor \i \c SizeFDiagCursor becomes \c Qt::SizeFDiagCursor \i \c SizeAllCursor becomes \c Qt::SizeAllCursor \i \c BlankCursor becomes \c Qt::BlankCursor \i \c SplitVCursor becomes \c Qt::SplitVCursor \i \c SplitHCursor becomes \c Qt::SplitHCursor \i \c PointingHandCursor becomes \c Qt::PointingHandCursor \i \c BitmapCursor becomes \c Qt::BitmapCursor \endlist The names of some debugging macro variables have been changed. We have tried not to break source compatibility as much as possible. If you observe error messages on the UNIX console or the Windows debugging stream that were previously disabled, please check these macro variables: \list \i \c DEBUG becomes \c QT_DEBUG \i \c NO_DEBUG becomes \c TQT_NO_DEBUG \i \c NO_CHECK becomes \c TQT_NO_CHECK \i \c CHECK_STATE becomes \c QT_CHECK_STATE \i \c CHECK_RANGE becomes \c QT_CHECK_RANGE \i \c CHECK_NULL becomes \c QT_CHECK_NULL \i \c CHECK_MATH becomes \c QT_CHECK_MATH \endlist The name of some debugging macro functions has been changed: \list \i \c ASSERT becomes \c Q_ASSERT \i \c CHECK_PTR becomes \c TQ_CHECK_PTR \endlist For the record, undocumented macro variables that are not part of the API have been changed: \list \i \c _OS_*_ becomes \c Q_OS_* \i \c _WS_*_ becomes \c Q_WS_* \i \c _CC_*_ becomes \c Q_CC_* \endlist \section1 Removed Functions All these functions have been removed in TQt 3.x: \list \i QFont::charSet() \i QFont::setCharSet() \i QMenuBar::setActItem() \i QMenuBar::setWindowsAltMode() \i QObject::initMetaObject() \i QPainter::drawQuadBezier() \i QPointArray::quadBezier() \i QRegExp::find() \i QSpinBox::downButton() \i QSpinBox::upButton() \i QString::basicDirection() \i QString::visual() \i QStyle::set...() functions \i QStyle::drawArrow() \i QWidget::setFontPropagation() \i QWidget::setPalettePropagation() \endlist Also, to avoid conflicts with \c , the following three global functions have been renamed: \list \i setw() (renamed qSetW()) \i setfill() (renamed qSetFill()) \i setprecision() (renamed qSetPrecision()) \endlist \section1 Obsoleted Functions The following functions have been obsoleted in TQt 3.0. The documentation of each of these functions should explain how to replace them in TQt 3.0. \warning It is best to consult \l http://doc.trolltech.com/3.0/ rather than the documentation supplied with TQt to obtain the latest information regarding obsolete functions and how to replace them in new code. \list \i QAccel::keyToString( QKeySequence k ) \i QAccel::stringToKey( const QString \& s ) \i QActionGroup::insert( QAction *a ) \i QButton::autoResize() const \i QButton::setAutoResize( bool ) \i QCanvasItem::active() const \i QCanvasItem::enabled() const \i QCanvasItem::selected() const \i QCanvasItem::visible() const \i QCanvasPixmapArray::QCanvasPixmapArray( QPtrList\ list, QPtrList\ hotspots ) \i QCanvasPixmapArray::operator!() \i QColorGroup::QColorGroup( const QColor \& foreground, const QColor \& background, const QColor \& light, const QColor \& dark, const QColor \& mid, const QColor \& text, const QColor \& base ) \i QComboBox::autoResize() const \i QComboBox::setAutoResize( bool ) \i QDate::dayName( int weekday ) \i QDate::monthName( int month ) \i QDir::encodedEntryList( const QString \& nameFilter, int filterSpec = DefaultFilter, int sortSpec = DefaultSort ) const \i QDir::encodedEntryList( int filterSpec = DefaultFilter, int sortSpec = DefaultSort ) const \i QDockWindow::isHorizontalStretchable() const \i QDockWindow::isVerticalStretchable() const \i QDockWindow::setHorizontalStretchable( bool b ) \i QDockWindow::setVerticalStretchable( bool b ) \i QFont::defaultFont() \i QFont::setDefaultFont( const QFont \& f ) \i QFont::setPixelSizeFloat( float pixelSize ) \i QFontDatabase::bold( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::families( bool ) const \i QFontDatabase::font( const QString \& familyName, const QString \& style, int pointSize, const QString \& ) \i QFontDatabase::isBitmapScalable( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::isFixedPitch( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::isScalable( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::isSmoothlyScalable( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::italic( const QString \& family, const QString \& style, const QString \& ) const \i QFontDatabase::pointSizes( const QString \& family, const QString \& style, const QString \& ) \i QFontDatabase::smoothSizes( const QString \& family, const QString \& style, const QString \& ) \i QFontDatabase::styles( const QString \& family, const QString \& ) const \i QFontDatabase::weight( const QString \& family, const QString \& style, const QString \& ) const \i QLabel::autoResize() const \i QLabel::setAutoResize( bool enable ) \i QLineEdit::cursorLeft( bool mark, int steps = 1 ) \i QLineEdit::cursorRight( bool mark, int steps = 1 ) \i QLineEdit::hasMarkedText() const \i QLineEdit::markedText() const \i QLineEdit::repaintArea( int, int ) \i QListBox::cellHeight( int i ) const \i QListBox::cellHeight() const \i QListBox::cellWidth() const \i QListBox::findItem( int yPos ) const \i QListBox::inSort( const QListBoxItem *lbi ) \i QListBox::inSort( const QString \& text ) \i QListBox::itemYPos( int index, int *yPos ) const \i QListBox::numCols() const \i QListBox::totalHeight() const \i QListBox::totalWidth() const \i QListBoxItem::current() const \i QListBoxItem::selected() const \i QListView::removeItem( QListViewItem *item ) \i QListViewItem::removeItem( QListViewItem *item ) \i QMainWindow::addToolBar( QDockWindow *, Dock = DockTop, bool newLine = FALSE ) \i QMainWindow::addToolBar( QDockWindow *, const QString \& label, Dock = DockTop, bool newLine = FALSE ) \i QMainWindow::lineUpToolBars( bool keepNewLines = FALSE ) \i QMainWindow::moveToolBar( QDockWindow *, Dock = DockTop ) \i QMainWindow::moveToolBar( QDockWindow *, Dock, bool nl, int index, int extraOffset = -1 ) \i QMainWindow::removeToolBar( QDockWindow *) \i QMainWindow::setToolBarsMovable( bool ) \i QMainWindow::toolBarPositionChanged( QToolBar *) \i QMainWindow::toolBarsMovable() const \i QMessageBox::message( const QString \& caption, const QString \& text, const QString \& buttonText = QString::null, QWidget *parent = 0, const char *= 0 ) \i QMessageBox::query( const QString \& caption, const QString \& text, const QString \& yesButtonText = QString::null, const QString \& noButtonText = QString::null, QWidget *parent = 0, const char *= 0 ) \i QMessageBox::standardIcon( Icon icon, GUIStyle style ) \i QPalette::normal() \i QRegExp::match( const QString \& str, int index = 0, int *len = 0, bool indexIsStart = TRUE ) const \i QScrollView::childIsVisible( QWidget *child ) \i QScrollView::showChild( QWidget *child, bool show = TRUE ) \i QSignal::block( bool b ) \i QSignal::isBlocked() const \i QSignal::parameter() const \i QSignal::setParameter( int value ) \i QSimpleRichText::draw( QPainter *p, int x, int y, const QRegion \& clipRegion, const QColorGroup \& cg, const QBrush *paper = 0 ) const \i QString::ascii() const \i QString::data() const \i QString::setExpand( uint index, QChar c ) \i QStyle::defaultFrameWidth() const \i QStyle::scrollBarExtent() const \i QStyle::tabbarMetrics( const QWidget *t, int \& hf, int \& vf, int \& ov ) const \i QTabDialog::isTabEnabled( const char *name ) const \i QTabDialog::selected( const QString \& ) \i QTabDialog::selected( const QString \& tabLabel ) \i QTabDialog::setTabEnabled( const char *name, bool enable ) \i QTextStream::QTextStream( QString \& str, int filemode ) \i QToolBar::QToolBar( const QString \& label, QMainWindow *, ToolBarDock = DockTop, bool newLine = FALSE, const char *name = 0 ) \i QToolButton::iconSet( bool on ) const \i QToolButton::offIconSet() const \i QToolButton::onIconSet() const \i QToolButton::setIconSet( const QIconSet \& set, bool on ) \i QToolButton::setOffIconSet( const QIconSet \& ) \i QToolButton::setOnIconSet( const QIconSet \& ) \i QToolTip::enabled() \i QToolTip::setEnabled( bool enable ) \i QTranslator::find( const char *context, const char *sourceText, const char *comment = 0 ) const \i QTranslator::insert( const char *context, const char *sourceText, const QString \& translation ) \i QTranslator::remove( const char *context, const char *sourceText ) \i QUriDrag::setFilenames( const QStringList \& fnames ) \i QWidget::backgroundColor() const \i QWidget::backgroundPixmap() const \i QWidget::iconify() \i QWidget::setBackgroundColor( const QColor \& c ) \i QWidget::setBackgroundPixmap( const QPixmap \& pm ) \i QWidget::setFont( const QFont \& f, bool ) \i QWidget::setPalette( const QPalette \& p, bool ) \i QWizard::setFinish( QWidget *, bool ) \i QXmlInputSource::QXmlInputSource( QFile \& file ) \i QXmlInputSource::QXmlInputSource( QTextStream \& stream ) \i QXmlReader::parse( const QXmlInputSource \& input ) \endlist Additionally, these preprocessor directives have been removed: \list \i \c {#define strlen tqstrlen} \i \c {#define strcpy qstrcpy} \i \c {#define strcmp qstrcmp} \i \c {#define strncmp tqstrncmp} \i \c {#define stricmp tqstricmp} \i \c {#define strnicmp tqstrnicmp} \endlist See the changes-3.0.0 document for an explanation of why this had to be done. You might have been relying on the non-portable and unpredictable behavior resulting from these directives. We strongly recommend that you either make use of the safe qstr* variants directly or ensure that no 0 pointer is passed to the standard C functions in your code base. \section1 Collection Class Renaming The classes QArray, QCollection, QList, QListIterator, QQueue, QStack and QVector have been renamed. To ease porting, the old names and the old header-file names are still supported. \table \header \i Old Name \i New Name \i New Header File \row \i QArray \i \l QMemArray \i \c \row \i QCollection \i \l QPtrCollection \i \c \row \i QList \i \l QPtrList \i \c \row \i QListIterator \i \l QPtrListIterator \i \c \row \i QQueue \i \l QPtrQueue \i \c \row \i QStack \i \l QPtrStack \i \c \row \i QVector \i \l QPtrVector \i \c \endtable \section1 QButtonGroup In TQt 2.x, the function QButtonGroup::selected() returns the selected \e radio button (QRadioButton). In TQt 3.0, it returns the selected \e toggle button (\l QButton::toggleButton), a more general concept. This might affect programs that use QButtonGroups that contain a mixture of radio buttons and non-radio (e.g. QCheckBox) toggle buttons. \section1 QDate Two QDate member functions that were virtual in TQt 2.0 are not virtual in TQt 3.0. This is only relevant if you subclassed QDate and reimplemented these functions: \list \i QString QDate::monthName( int month ) const \i QString QDate::dayName( int weekday ) const \endlist In addition to no longer being virtual, QDate::monthName() and QDate::dayName() have been renamed QDate::shortMonthName() and QDate::shortDayName() and have been made static (as they should had been in the first place). The old names are still provided for source compatibility. \section1 QFileDialog If the mode was not set explicitly, and the user entered a non-existent file, the dialog would accept this. In TQt 3.x, you must set the mode, e.g. setMode(QFileDialog::AnyFile), to get the same behavior. \section1 QFont The internals of QFont have changed significantly between TQt 2.2 and Qt 3.0, to give better Unicode support and to make developing internationalized applications easier. The original API has been preserved with minimal changes. The CharSet enum and its related functions have disappeared. This is because TQt now handles all charset related issues internally, and removes this burden from the developer. If you used the CharSet enum or its related functions, e.g QFont::charSet() or QFont::setCharSet(), just remove them from your code. There are a few functions that took a QFont::CharSet as a parameter; in these cases simply remove the charset from the parameter list. \section1 QInputDialog The two static getText(...) methods in QInputDialog have been merged. The \c echo parameter is the third parameter and defaults to QLineEdit::Normal. If you used calls to QInputDialog::getText(...) that provided more than the first two required parameters you will must add a value for the \c echo parameter. \section1 QLayout and Other Abstract Layout Classes The definitions of \l QGLayoutIterator, \l QLayout, \l QLayoutItem, \l QLayoutIterator, \l QSpacerItem and \l QWidgetItem have been moved from \c to \c . The header \c now includes \c for compatibility. It might be removed in a future version. \section1 QListViewItem The paintBranches() function in TQt 2.x had a GUIStyle parameter; this has been dropped for TQt 3.x since GUI style is handled by the new style engine (See \l QStyle.) \section1 QMoveEvent In TQt 2.x, the function QMoveEvent::pos() returned the position of the widget in its parent widget, including the window frame. In TQt 3.0, it returns the new position of the widget, excluding window frame for top level widgets. \section1 QMultiLineEdit The QMultiLineEdit was a simple editor widget in previous TQt versions. Since TQt 3.0 includes a new richtext engine, which also supports editing, QMultiLineEdit is obsolete. For the sake of compatibility QMultiLineEdit is still provided. It is now a subclass of QTextEdit which wraps the old QMultiLineEdit so that it is mostly source compatible to keep old applications working. For new applications and when maintaining existing applications we recommend that you use QTextEdit instead of QMultiLineEdit wherever possible. Although most of the old QMultiLineEdit API is still available, there is one important difference. The old QMultiLineEdit operated in terms of lines, whereas QTextEdit operates in terms of paragraphs. This is because lines change all the time during wordwrap, whereas paragraphs remain paragraphs. The consequence of this change is that functions which previously operated on lines, e.g. numLines(), textLine(), etc., now work on paragraphs. Also the function getString() has been removed since it published the internal data structure. In most cases, applications that used QMultiLineEdit will continue to work without problems. Applications that worked in terms of lines may require some porting. The source code for the old 2.x version of QMultiLineEdit can be found in \c $TQTDIR/src/attic/qtmultilineedit.h/cpp. Note that the class has been renamed to QtMultiLineEdit to avoid name clashes. If you really need to keep compatibility with the old QMultiLineEdit, simply include this class in your project and rename QMultiLineEdit to QtMultiLineEdit throughout. \section1 QPrinter QPrinter has undergone some changes, to make it more flexible and to ensure it has the same runtime behaviour on both Unix and Windows. In 2.x, QPrinter behaved differently on Windows and Unix, when using view transformations on the QPainter. This has changed now, and QPrinter behaves consistently across all platforms. A compatibilty mode has been added that forces the old behaviour, to ease porting from TQt 2.x to TQt 3.x. This compatibilty mode can be enabled by passing the QPrinter::Compatible flag to the QPrinter constructor. On X11, QPrinter used to generate encapsulated postscript when fullPage() was TRUE and only one page was printed. This does not happen by default anymore, providing a more consistent printing output. \section1 QRegExp The \l QRegExp class has been rewritten to support many of the features of Perl regular expressions. Both the regular expression syntax and the QRegExp interface have been modified. Be also aware that \c is no longer included automatically when you include \c . See \link #Headers above \endlink for details. \omit In TQt 3.0, ntqregexp.h has to include ntqstringlist.h, so it's no good to have ntqstringlist.h include ntqregexp.h, unless one wants to achieve an Escher effect. \endomit \section2 New special characters There are five new special characters: (, ), {, | and } (parentheses, braces and pipe). When porting old regular expressions, you must add \ (backslash) in front of any of these (actually, \\ in C++ strings), unless it is already there. Example: Old code like \code QRegExp rx( "([0-9|]*\\)" ); // works in TQt 2.x \endcode should be converted into \code QRegExp rx( "\\([0-9\\|]*\\)" ); // works in TQt 2.x and 3.x \endcode (Within character classes, the backslash is not necessary in front of certain characters, e.g. |, but it doesn't hurt.) Wildcard patterns need no conversion. Here are two examples: \code QRegExp wild( "(*.*)" ); wild.setWildcard( TRUE ); \endcode \code // TRUE as third argument means wildcard QRegExp wild( "(*.*)", FALSE, TRUE ); \endcode However, when they are used, make sure to use QRegExp::exactMatch() rather than the obsolete QRegExp::match(). QRegExp::match(), like QRegExp::find(), tries to find a match somewhere in the target string, while QRegExp::exactMatch() tries to match the whole target string. \section2 QRegExp::operator=() This function has been replaced by \l QRegExp::setPattern() in TQt 2.2. Old code such as \code QRegExp rx( "alpha" ); rx.setCaseSensitive( FALSE ); rx.setWildcard( TRUE ); rx = "beta"; \endcode still compiles with TQt 3, but produces a different result (the case sensitivity and wildcard options are forgotten). This way, \code rx = "beta"; \endcode is the same as \code rx = QRegExp( "beta" ); \endcode which is what one expects. \section2 QRegExp::match() The following function is now obsolete, as it has an unwieldy parameter list and was poorly named: \list \i bool QRegExp::match( const QString \& str, int index = 0, int * len = 0, bool indexIsStart = TRUE ) const \endlist It will be removed in a future version of Qt. Its \link QRegExp::match() documentation \endlink explains how to replace it. \section2 QRegExp::find() This function was removed, after a brief appearance in TQt 2.2. Its name clashed with QString::find(). Use \l QRegExp::search() or \l QString::find() instead. \section2 QString::findRev() and QString::contains() \l QString::findRev()'s and \l QString::contains()'s semantics have changed between 2.0 and 3.0 to be more consistent with the other overloads. For example, \code QString( "" ).contains( QRegExp("") ) \endcode returns 1 in TQt 2.0; it returns 0 in TQt 3.0. Also, "^" now really means start of input, so \code QString( "Heisan Hoppsan" ).contains( QRegExp("^.*$") ) \endcode returns 1, not 13 or 14. This change affect very few existing programs. \section2 QString::replace() With TQt 1.0 and 2.0, a QString is converted implicitly into a QRegExp as the first argument to QString::replace(): \code QString text = fetch_it_from_somewhere(); text.replace( QString("[A-Z]+"), "" ); \endcode With TQt 3.0, the compiler gives an error. The solution is to use a QRegExp cast: \code text.replace( QRegExp("[A-Z]+"), "" ); \endcode This change makes it possible to introduce a QString::replace(QString, QString) overload in a future version of Qt without breaking source compatibility. \section1 QSemiModal The QSemiModal class is now obsolete. You should call show() on a modal dialog instead. \section1 QSortedList The QSortedList class is now obsolete. Consider using a QDict, a QMap or a plain QPtrList instead. \section1 QTableView The QTableView class has been obsoleted and is no longer a part of the Qt API. Either use the powerful QTable class or the simplistic QGridView in any new code you create. If you really need the old table view for compatibility you can find it in \c $TQTDIR/src/attic/qttableview.{cpp,h}. Note that the class has been renamed from QTableView to QtTableView to avoid name clashes. To use it, simply include it in your project and rename QTableView to QtTableView throughout. \section1 QToolButton The \l QToolButton class used to distinguish between "on" and "off" icons. In 3.0, this mechanism was moved into the \l QIconSet class (see \l QIconSet::State). The old \l QToolButton::onIconSet and \l QToolButton::offIconSet properties are still provided so that old source will compile, but their semantics have changed: they are now synonyms for \l QToolButton::iconSet. If you used that distinction in TQt 2.x, you will need to adjust your code to use the QIconSet On/Off mechanism. Likewise, the \e on parameter of these two functions is now ignored: \list \i void QToolButton::setIconSet ( const QIconSet \& set, bool on ) \i QIconSet QToolButton::iconSet ( bool on ) const \endlist These functions are only provided for ease of porting. New code should use the following instead: \list \i void QToolButton::setIconSet( const QIconSet \& set ) \i QIconSet QToolButton::iconSet() const \endlist Finally, this function is no longer virtual: \list \i void QToolButton::setIconSet( const QIconSet \& set, bool on ) \endlist If you have a class that inherits QToolButton and that reimplements QToolButton::setIconSet(), you should make the signature of the reimplementation agree with the new \l QToolButton::setIconSet(), a virtual function. \section1 QTextStream The global QTextStream manipulators setw(), setfill() and setprecison() were renamed to qSetW(), qSetFill() and qSetPrecision() to avoid conflicts with \c . If you used them, you must rename the occurrences to the new names. \section1 QTranslator The \l QTranslator class was extended in TQt 2.2, and these extensions lead to a new interface. This interface is used mainly by translation tools (for example, \link linguist-manual.book Qt Linguist \endlink). For source compatibility, no member function was effectively removed. The \l QTranslator documentation points out which functions are obsolete. This function is no longer virtual: \list \i QString QTranslator::find( const char * context, const char * sourceText ) const \endlist If you have a class that inherits QTranslator and which reimplements QTranslator::find(), you should reimplement QTranslator::findMessage() instead. In fact, find() is now defined in terms of findMessage(). By doing the conversion, you will also gain support for translator comments and for any future extensions. \section1 QWidget QWidget::backgroundColor(), QWidget::setBackgroundColor(), QWidget::backgroundPixmap() and QWidget::setBackgroundPixmap() have often been the source of much confusion in previous releases. TQt 3.0 addresses this by obsoleting these functions and by replacing them with eight new functions: QWidget::eraseColor(), QWidget::setEraseColor(), QWidget::erasePixmap(), QWidget::setErasePixmap(), QWidget::paletteBackgroundColor(), QWidget::setPaletteBackgroundColor(), QWidget::paletteBackgroundPixmap() and QWidget::setPaletteBackgroundPixmap(). See their documentation for details. \section1 QXml Classes \section2 QXmlInputSource The semantics of QXmlInputSource has changed slightly. This change only affects code that parses the same data from the same input source multiple times. In such cases you must call QXmlInputSource::reset() before the second call to QXmlSimpleReader::parse(). So code like \code QXmlInputSource source( &xmlFile ); QXmlSimpleReader reader; ... reader.parse( source ); ... reader.parse( source ); \endcode must be changed to \code QXmlInputSource source( &xmlFile ); QXmlSimpleReader reader; ... reader.parse( source ); ... source.reset(); reader.parse( source ); \endcode \section2 QXmlLocator Due to some internal changes, it was necessary to clean-up the semantics of QXmlLocator: this class is now an abstract class. This shouldn't cause any problems, since programmers usually used the QXmlLocator that was reported by QXmlContentHandler::setDocumentLocator(). If you used this class in some other way, you must adjust your code to use the QXmlLocator that is reported by the QXmlContentHandler::setDocumentLocator() function. \section1 Asynchronous I/O Classes QASyncIO, QDataSink, QDataSource, QIODeviceSource and QDataPump were used internally in previous versions of Qt, but are not used anymore. They are now obsolete. \section1 Transparent widgets In TQt 2.x, the AutoMask property was used to obtain a transparent-looking widget. In general, this approach is slow and processor hungry. TQt 3.0 uses the BackgroundOrigin which provides vastly improved performance and more flexibility in most cases. The few classes for which the AutoMask property is still the best approach are QCheckBox, QComboBox, QPushButton, QRadioButton and QTabWidget. \section1 Bezier Curves The function names for Bezier curves in QPainter and QPointArray have been corrected. They now properly reflect their cubic form instead of a quadratic one. If you have been using either QPainter::drawQuadBezier() or QPointArray::quadBezier() you must replace these calls with \list \i void QPainter::drawCubicBezier( const QPointArray \&, int index=0 ) and \i QPointArray QPointArray::cubicBezier() const \endlist respectively. Neither the arguments nor the resulting curve have changed. \section1 Locale-aware String Comparisons in QIconView, QListBox, QListView and QTable In TQt 2.x, QString only provided string comparisons using the Unicode values of the characters of a string. This is efficient and reliable, but it is not the appropriate order for most languages. For example, French users expect 'é' (e acute) to be treated essentially as 'e' and not put after 'z'. In TQt 3.0, QString::localeAwareCompare() implements locale aware string comparisions on certain platforms. The classes \l QIconView, \l QListBox, \l QListView and \l QTable now use QString::localeAwareCompare() instead of QString::compare(). If you want to control the behaviour yourself you can always reimplement QIconViewItem::compare(), QListBox::text(), QListViewItem::compare() or QTableItem::key() as appropriate. */