# translation of zh_CN.po to # translation of wlassistant to Simplified Chinese # This file is distributed under the same license as the wlassistant package. # Copyright (C) 2005 Free Software Foundation, Inc. # Zhang fu ping , 2005. # Zhang fu ping , 2005. # justin , 2005. # justin , 2005. # msgid "" msgstr "" "Project-Id-Version: zh_CN\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2007-04-02 02:31+0200\n" "PO-Revision-Date: 2005-12-15 16:09+0800\n" "Last-Translator: justin \n" "Language-Team: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10\n" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:103 msgid "Initializing..." msgstr "正在初始化..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:110 msgid "" "Kernel 2.6 or later not present.\n" "Wireless Assistant will now quit." msgstr "" "Kernel2.6或更高版本不存在！\n" "无线网络助手将立即退出。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:156 msgid "" "No usable wireless devices found.\n" "Wireless Assistant will now quit." msgstr "" "未发现任何无线设备\n" "无线网络助手将立即退出。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:179 msgid "" "

You might have insufficient permissions for Wireless Assistant to " "function properly.

Did you run it using 'sudo'?

" msgstr "" "

您的权限不够，可能无法正常运行无线网络助手的所有功能。

您是否运" "行了\"sudo\"命令

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:200 msgid "" "Executable(s) '%1' could not be found.\n" "Wireless Assistant will now quit." msgstr "" "未发现任何可执行的 '%1'.\n" "无线网络助手将立即退出。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:238 msgid "" "Connection to '%1' has been lost!\n" "Would you like to reconnect?" msgstr "" " '%1' 的连接已断开!\n" "您想要重新连接吗?" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:238 msgid "Connection Lost" msgstr "连接已断开" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:252 msgid "" "

Settings for network '%1' are about to be deleted.

Would " "you like to continue?

" msgstr "

'%1' 网络设置将被删除，

您想要继续吗？

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:257 msgid "Settings deleted." msgstr "设置已删除！" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:285 msgid "" "

File '%1' could not be opened for writing.

Nameserver(s) " "and/or domain are not set.

" msgstr "" "

文件 '%1' 无法写入

名字／域名服务器设置失败。

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:317 msgid "Bringing interface %1 up..." msgstr "唤醒接口 %1..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:321 msgid "Waiting before scanning..." msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:328 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:334 msgid "Scanning..." msgstr "扫描..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:343 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:807 msgid "Done." msgstr "完成。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:348 msgid "No networks found." msgstr "未找到任何网络。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:351 #, fuzzy msgid "" "Radio of your wireless card seems to be turned off using an external switch " "on your computer.\n" "You need turn it on to be able to use wireless networks." msgstr "" "无线网卡已被计算机上的外部程序关闭。\n" "要使用无线网络您必须先唤醒该网卡。" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:459 msgid "Freq (Hz)" msgstr "频率 (赫兹)" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:473 msgid "" "Radio of your wireless card is off.\n" "Would you like to turn it on?" msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:559 #, fuzzy msgid "Auto connection failed." msgstr "首次连接向导" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:570 msgid "" "

Can not connect to network '%1'.

The network you are " "trying to connect to requires WPA authentication. The necessary executables " "wpa_supplicant and wpa_cli could not be found. Install " "wpa_supplicant and restart Wireless Assistant to connect.

" msgstr "" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:579 msgid "%1 - First Connection Wizard" msgstr "%1 - 首次连接向导" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:616 msgid "Network settings updated." msgstr "网络设置已更新!" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:644 #, fuzzy msgid "Running pre-connection command..." msgstr "连接失败." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:650 msgid "Connecting to '%1'..." msgstr "连接到 '%1'..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:669 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:685 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:718 #, fuzzy msgid "Connection failed." msgstr "连接已断开" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:701 #, fuzzy msgid "Running post-connection command..." msgstr "首次连接向导" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:708 msgid "Testing connection..." msgstr "正在测试连接..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:714 msgid "Successfully connected to '%1'." msgstr "成功连接到 '%1'." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:722 msgid "" "Connection failed.\n" "Would you like to review settings for this network?" msgstr "" "连接失败\n" "你希望检查该网络设置吗？" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:722 msgid "Review Settings?" msgstr "检查设置?" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:761 msgid "" "

You are about to disconnect from '%1'.

Would you like to " "continue?

" msgstr "

您即将从网络 '%1'.断开，

要继续吗？

" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:766 #, fuzzy msgid "Running pre-disconnection command..." msgstr "连接失败." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:772 msgid "Disconnecting..." msgstr "正在断开网络..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:778 msgid "Waiting for DHCP client to shut down..." msgstr "等待DHCP客户端关闭..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:801 #, fuzzy msgid "Running post-disconnection command..." msgstr "首次连接向导" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:810 msgid "Cancelled." msgstr "已取消" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:906 msgid "&Disconnect" msgstr "&断开连接" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:908 msgid "Disconnect from the selected network" msgstr "断开该网络" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:911 msgid "&Connect" msgstr "&连接" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:913 rc.cpp:39 #, no-c-format msgid "Connect to the selected network" msgstr "连接到选定网络" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:960 msgid "&Stop" msgstr "&停止" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:964 msgid "" "Terminate current process\n" "(%1)" msgstr "终止当前进程
(%1)" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:979 rc.cpp:26 #, no-c-format msgid "Quit the application" msgstr "退出应用程序o" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1038 #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1047 msgid "Disconnect..." msgstr "正在断开连接..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1041 #, fuzzy msgid "Connect" msgstr "连接" #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1043 msgid "Forget Settings..." msgstr "忽略设置..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1044 msgid "Edit Settings..." msgstr "编辑设置..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1050 msgid "Configure and Connect..." msgstr "设置并连接..." #: /home/pn/Development/wlassistant/src/wlassistant.cpp:1063 #, fuzzy msgid "%1 Settings" msgstr "%1 设置" #: /home/pn/Development/wlassistant/src/_translatorinfo.cpp:1 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "" "_: 翻译人员名单\n" "张福平" #: /home/pn/Development/wlassistant/src/_translatorinfo.cpp:3 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "" "_: 翻译人员EMAIL列表\n" "justin-brain@hotmail.com" #: /home/pn/Development/wlassistant/src/main.cpp:30 #: /home/pn/Development/wlassistant/src/main.cpp:42 rc.cpp:3 #, no-c-format msgid "Wireless Assistant" msgstr "无线网络助手" #: /home/pn/Development/wlassistant/src/netparams.h:76 msgid "" "

The network changed its security settings.

Please go to " "Security tab of the following dialog and configure WEP settings.

" msgstr "" "

该网络安全设置已更改。

请到以下对话框中的安全选项卡中配置" "WEP设置。

" #: /home/pn/Development/wlassistant/src/netparams.h:78 msgid "" "

Your WEP Key is not set properly.

Please go to Security " "tab of the following dialog and enter the required key.

" msgstr "" "

您的WEP密钥设置有问题。

请在以下对话框中的安全选项卡中输" "入合适的密钥。

" #: /home/pn/Development/wlassistant/src/netparams.h:82 msgid "" "

The network has stopped broadcasting its ESSID since the last time " "you were connected.

Would you like to use '%1' as an ESSID for " "this network?

NOTE: If you answer No, a dialog will appear where " "you will be able to specify a different ESSID.

" msgstr "" "

自从上次您成功连接后该网络已停止广播其扩展服务区标示符（ESSID）。

您希望使用%1作为该网络的ESSID吗？

注意：如果您回答\"否" "\"，程序将会弹出对话框让您设置一个不同的ESSID。

" #: rc.cpp:9 #, no-c-format msgid "Alt+O" msgstr "" #: rc.cpp:12 #, no-c-format msgid "Toggle network list/options" msgstr "网络触发器列表／选项" #: rc.cpp:15 #, no-c-format msgid "" "

Options Button

\n" "

Pressing this toggle button will show the available application options.\n" "

HINT: Press this button again to return to the network list.

" msgstr "" "

选项

\n" "

点击该按钮将显示所有可用选项.

\n" "

提示：再次点击该按钮将返回到网络列表。

" #: rc.cpp:23 #, no-c-format msgid "Alt+Q" msgstr "" #: rc.cpp:29 #, no-c-format msgid "" "

Quit Button

\n" "

Pressing this button will quit the application.

" msgstr "" "

退出

\n" "

点击此按钮将退出该程序

" #: rc.cpp:33 #, fuzzy, no-c-format msgid "Co&nnect" msgstr "连接" #: rc.cpp:36 rc.cpp:181 #, no-c-format msgid "Alt+N" msgstr "" #: rc.cpp:42 #, no-c-format msgid "" "

Connect/Disconnect Button

\n" "

Pressing this button will connect to/disconnect from the network " "currently selected in the network list.

" msgstr "" "

连接／断开

\n" "

点击该按钮将连接／断开网络列表中被选定的网络。

" #: rc.cpp:46 #, no-c-format msgid "Refresh" msgstr "刷新" #: rc.cpp:50 #, no-c-format msgid "Refresh network list" msgstr "刷新网络列表" #: rc.cpp:53 #, no-c-format msgid "" "

Scan Button

\n" "

Pressing this button will scan for wireless networks and refresh the " "network list.

" msgstr "" "

扫描

\n" "

点击该按钮将扫描所有可用无线网络并刷新该网络列表。

" #: rc.cpp:57 #, no-c-format msgid "Device:" msgstr "设备:" #: rc.cpp:60 #, no-c-format msgid "Pick a network device to use" msgstr "请选择一个需要使用的网络设备" #: rc.cpp:63 #, no-c-format msgid "" "

Device Selection

\n" "

This combo box allows you to select which wireless card to use.

\n" "

NOTE: Selecting a different card will refresh the network list.

" msgstr "" "

选择设备

\n" "

您可以使用该选项卡来选择您希望使用的无线网卡。

\n" "

注意：选择另一张无线网卡将会刷新网络列表。

" #: rc.cpp:68 rc.cpp:199 rc.cpp:325 #, no-c-format msgid "ESSID" msgstr "扩展服务区标示符（ESSID）" #: rc.cpp:71 #, no-c-format msgid "Channel" msgstr "频道" #: rc.cpp:74 #, no-c-format msgid "Link Quality" msgstr "连接质量" #: rc.cpp:77 #, no-c-format msgid "WEP/WPA" msgstr "" #: rc.cpp:80 #, no-c-format msgid "AP" msgstr "无线访问节点" #: rc.cpp:83 #, no-c-format msgid "" "

Network List

\n" "

This list shows all the wireless networks that have been found.

\n" "

HINT: Click the Refresh button to update this list.

" msgstr "" "

网络列表

\n" "

该列表显示了所有可用无线网络。

\n" "

提示：点击\"刷新\"按钮可更新该列表。

" #: rc.cpp:88 #, no-c-format msgid "Ready" msgstr "" #: rc.cpp:91 #, no-c-format msgid "" "

Status Bar

\n" "

Messages describing current process are shown in this area.

" msgstr "" "

状态栏

\n" "

该区域用来显示程序当前进程。

" #: rc.cpp:95 #, no-c-format msgid "Automatically connect on startup" msgstr "" #: rc.cpp:99 #, no-c-format msgid "" "

AutomaticallyConnect on Startup

\n" "

Checking this box will make the application try to connect to the best " "available network. Only networks that have been previously configured will " "be taken into account.

" msgstr "" #: rc.cpp:103 #, no-c-format msgid "Automaticall&y reconnect if connection is lost" msgstr "" #: rc.cpp:106 #, no-c-format msgid "Alt+Y" msgstr "" #: rc.cpp:109 #, fuzzy, no-c-format msgid "" "

Automatically Reconnect if Connection is Lost

\n" "

Checking this box will make the application try to reconnect after the " "connection is lost.

" msgstr "" "

连接成功后退出

\n" "

选择该选项后，应用程序将在成功建立一个无线网络连接后退出。

" #: rc.cpp:113 #, no-c-format msgid "Quit upon successful connection" msgstr "连接成功后退出" #: rc.cpp:117 #, no-c-format msgid "" "

Quit Upon Successful Connection

\n" "

Checking this box will make the application close after successfully " "establishing a connection to a wireless network.

" msgstr "" "

连接成功后退出

\n" "

选择该选项后，应用程序将在成功建立一个无线网络连接后退出。

" #: rc.cpp:121 #, no-c-format msgid "&Group access points with the same ESSID" msgstr "" #: rc.cpp:124 #, no-c-format msgid "Alt+G" msgstr "" #: rc.cpp:127 #, no-c-format msgid "" "

Group Access Points with the Same ESSID

\n" "

Checking this box will make all access points with the same ESSID appear " "as one item in the network list.

" msgstr "" #: rc.cpp:131 #, no-c-format msgid "Delay before scanning:" msgstr "" #: rc.cpp:134 rc.cpp:145 rc.cpp:167 #, no-c-format msgid "Specify how long to wait for an IP" msgstr "指定获取IP地址的时间上限" #: rc.cpp:137 rc.cpp:148 rc.cpp:170 #, no-c-format msgid "" "

DHCP Client Timeout

\n" "

This option specifies the amount of time after which the application " "should stop waiting for an IP address and assume that the connection has " "failed.

\n" "

HINT: Increasing this number can help if you have problems connecting " "to some networks.

" msgstr "" "

DHCP 客户端超时

\n" "

该选项用于指定获取IP地址的时间上限，超过该时间限制应用程序将会认为连接已失" "败。

\n" "

提示：如果您在连接某个网络时遇到问题，可以尝试提高该时间限制。

" #: rc.cpp:142 #, no-c-format msgid "DHCP client timeout:" msgstr "DHCP 客户端超时:" #: rc.cpp:153 rc.cpp:164 rc.cpp:412 rc.cpp:441 rc.cpp:470 rc.cpp:499 #, no-c-format msgid "s" msgstr "s" #: rc.cpp:156 #, fuzzy, no-c-format msgid "Specify how long to wait before scanning" msgstr "指定获取IP地址的时间上限" #: rc.cpp:159 #, fuzzy, no-c-format msgid "" "

Delay Before Scanning

\n" "

This option specifies the amount of time to wait between bringing the " "interface up and performing a scan.

\n" "

HINT: Increasing this number can help if you have to refresh the list " "manually to see all the available networks.

" msgstr "" "

DHCP 客户端超时

\n" "

该选项用于指定获取IP地址的时间上限，超过该时间限制应用程序将会认为连接已失" "败。

\n" "

提示：如果您在连接某个网络时遇到问题，可以尝试提高该时间限制。

" #: rc.cpp:175 #, no-c-format msgid "" "Press the button below to enable all messages which have been turned off " "with the 'Don't Show Again' feature." msgstr "" "您可以按下该按钮以便显示所有曾经用 \"下次不再显示\" 选项关闭的信息。" #: rc.cpp:178 #, fuzzy, no-c-format msgid "E&nable All Messages" msgstr "显示所有信息" #: rc.cpp:184 #, no-c-format msgid "" "

Enable All Messages

\n" "

Pressing this button will enable all messages which have been turned off " "with the 'Don't Show Again' feature.

" msgstr "" "

显示所有信息

\n" "

点击该按钮将会显示所有曾经用 \"下次不再显示\" 选项关闭的信息。

" #: rc.cpp:188 #, no-c-format msgid "First Connection Wizard" msgstr "首次连接向导" #: rc.cpp:191 #, no-c-format msgid "Welcome to First Connection Wizard" msgstr "欢迎使用首次连接向导!" #: rc.cpp:194 #, no-c-format msgid "" "

This is the first time you are trying to connect to the selected " "network.

\n" "

You will be asked a few questions necessary to configure this connection." "

\n" "

Press Next to continue.

" msgstr "" "

这是您第一次试图连接该网络。

\n" "

请您回答相关问题以便配置该网络。

\n" "

按 \"下一步\" 继续。

" #: rc.cpp:202 #, no-c-format msgid "" "

You are trying to connect to a network that does not broadcast its " "ESSID.

\n" "

Please specify ESSID that you would like to use when connecting to this " "access point.

" msgstr "" "

您正在试图连接一个不广播其ESSID的网络

\n" "

请指定您希望使用的扩展服务区标示符（ESSID）以便连接到该无线访问节点（AP）" "

" #: rc.cpp:206 rc.cpp:328 #, no-c-format msgid "ESSID:" msgstr "扩展服务区标示符（ESSID):" #: rc.cpp:209 #, no-c-format msgid "Interface Configuration" msgstr "接口设置" #: rc.cpp:213 rc.cpp:334 #, no-c-format msgid "Automatic (DHCP)" msgstr "自动获取 (DHCP)" #: rc.cpp:217 #, no-c-format msgid "Manual" msgstr "手动设置" #: rc.cpp:221 #, no-c-format msgid "" "

Your IP and other parameters need to be configured to connect to any " "network.

\n" "

Which configuration option would you like to use when connecting to this " "network?

" msgstr "" "

在连接网络前，请先配置您的IP地址和其他相关参数。

\n" "

您希望使用哪个配置选项连接到该网络？

" #: rc.cpp:225 #, no-c-format msgid "Interface Parameters" msgstr "接口参数" #: rc.cpp:228 rc.cpp:355 #, no-c-format msgid "Secondary DNS:" msgstr "次选DNS服务器:" #: rc.cpp:231 rc.cpp:343 #, no-c-format msgid "IP:" msgstr "IP地址:" #: rc.cpp:234 rc.cpp:340 #, no-c-format msgid "Netmask:" msgstr "子网掩码:" #: rc.cpp:237 rc.cpp:358 #, no-c-format msgid "Primary DNS:" msgstr "首选DNS服务器" #: rc.cpp:240 rc.cpp:349 #, no-c-format msgid "Gateway:" msgstr "网关:" #: rc.cpp:243 rc.cpp:352 #, no-c-format msgid "Domain:" msgstr "域名:" #: rc.cpp:246 rc.cpp:346 #, no-c-format msgid "Broadcast:" msgstr "广播地址:" #: rc.cpp:249 #, no-c-format msgid "" "

Please specify interface parameters to be used to connect to this " "network.

\n" "

You may leave some fields blank.

" msgstr "" "

请指定连接到该网络的接口参数

\n" "

您可以将某些选项置空。

" #: rc.cpp:253 #, no-c-format msgid "WEP Configuration" msgstr "WEP配置" #: rc.cpp:256 #, no-c-format msgid "" "

The network you are trying to connect to requires WEP authentication.

\n" "

Which WEP mode would you like to use?

" msgstr "" "

您希望连接的网络需要连线对等加密（WEP）授权

\n" "

您希望使用哪种连线对等加密（WEP）模式

" #: rc.cpp:261 #, fuzzy, no-c-format msgid "Open S&ystem" msgstr "开发系统" #: rc.cpp:264 #, no-c-format msgid "Shared Key" msgstr "共享密钥" #: rc.cpp:267 rc.cpp:288 #, fuzzy, no-c-format msgid "

Please provide a key to be used with this network.

" msgstr "" "

请提供一个连接到该网络的密钥。

\n" "可以使用任何iwconfig支持的格式。" #: rc.cpp:270 #, no-c-format msgid "WEP key:" msgstr "WEP密钥" #: rc.cpp:273 rc.cpp:285 rc.cpp:370 rc.cpp:391 #, no-c-format msgid "ASCII" msgstr "" #: rc.cpp:276 #, fuzzy, no-c-format msgid "WPA Configuration" msgstr "WEP配置" #: rc.cpp:279 #, fuzzy, no-c-format msgid "" "

The network you are trying to connect to requires WPA authentication.

" msgstr "" "

您希望连接的网络需要连线对等加密（WEP）授权

\n" "

您希望使用哪种连线对等加密（WEP）模式

" #: rc.cpp:282 #, fuzzy, no-c-format msgid "WPA Key:" msgstr "WEP密钥" #: rc.cpp:291 rc.cpp:376 #, no-c-format msgid "?
?
?
?" msgstr "" #: rc.cpp:294 rc.cpp:373 #, no-c-format msgid "" "WPA Version:
Group Cipher:
Pairwise Cipher:
Authentication Suite:" msgstr "" #: rc.cpp:297 #, no-c-format msgid "Done!" msgstr "完成!" #: rc.cpp:300 #, no-c-format msgid "" "

Congratulations!

\n" "

You have successfully finished configuring this connection.

\n" "

Press Finish to connect!

" msgstr "" "

恭喜!

\n" "

您已成功完成该连接的配置！

\n" "

请点击\"完成\"按钮连接该网络！

" #: rc.cpp:311 #, no-c-format msgid "F1" msgstr "F1" #: rc.cpp:322 #, no-c-format msgid "I&nterface" msgstr "接口" #: rc.cpp:337 #, fuzzy, no-c-format msgid "&Manual" msgstr "手动设置" #: rc.cpp:361 #, no-c-format msgid "Securit&y" msgstr "安全" #: rc.cpp:364 #, fuzzy, no-c-format msgid "WPA Settings" msgstr "%1 设置" #: rc.cpp:367 rc.cpp:388 #, no-c-format msgid "Key:" msgstr "密钥:" #: rc.cpp:379 #, fuzzy, no-c-format msgid "WEP Settings" msgstr "%1 设置" #: rc.cpp:382 #, fuzzy, no-c-format msgid "Open Syste&m" msgstr "开发系统" #: rc.cpp:385 #, no-c-format msgid "Alt+M" msgstr "" #: rc.cpp:394 #, fuzzy, no-c-format msgid "Shared &Key" msgstr "共享密钥" #: rc.cpp:397 #, no-c-format msgid "Alt+K" msgstr "" #: rc.cpp:400 #, no-c-format msgid "Advanced" msgstr "" #: rc.cpp:403 #, no-c-format msgid "" "Security Warning: the commands specified below will be ran with the " "same privileges as Wireless Assistant has." msgstr "" #: rc.cpp:406 #, fuzzy, no-c-format msgid "Pre-Connection Command" msgstr "连接失败." #: rc.cpp:409 rc.cpp:438 rc.cpp:467 rc.cpp:496 #, no-c-format msgid "Timeout:" msgstr "" #: rc.cpp:415 rc.cpp:444 rc.cpp:473 rc.cpp:502 #, no-c-format msgid "Amount of time after which the process will be killed." msgstr "" #: rc.cpp:418 rc.cpp:447 rc.cpp:476 rc.cpp:505 #, no-c-format msgid "" "

Timeout

\n" "

This option specifies how long should Wireless Assistant wait for the " "process to finish, before it will be killed.

" msgstr "" #: rc.cpp:422 rc.cpp:451 rc.cpp:480 rc.cpp:509 #, no-c-format msgid "Run detached" msgstr "" #: rc.cpp:425 rc.cpp:454 rc.cpp:483 rc.cpp:512 #, no-c-format msgid "Don't wait for the process to finish." msgstr "" #: rc.cpp:428 rc.cpp:457 rc.cpp:486 rc.cpp:515 #, no-c-format msgid "" "

Run Detached

\n" "

If this checkbox is selected Wireless Assistant will not wait for the " "process to finish.

" msgstr "" #: rc.cpp:432 rc.cpp:461 rc.cpp:490 rc.cpp:519 #, fuzzy, no-c-format msgid "Command:" msgstr "域名:" #: rc.cpp:435 #, fuzzy, no-c-format msgid "Post-Connection Command" msgstr "首次连接向导" #: rc.cpp:464 #, no-c-format msgid "Pre-Disconnection Command" msgstr "" #: rc.cpp:493 #, no-c-format msgid "Post-Disconnection Command" msgstr "" #~ msgid "WEP Mode" #~ msgstr "连线对等加密（WEP）模式" #~ msgid "WEP?" #~ msgstr "连线对等加密" #, fuzzy #~ msgid "Application Options" #~ msgstr "应用程序选项"