Use new TQ_METHOD, TQ_SIGNAL, TQ_SLOT defines

Signed-off-by: Michele Calgaro <[email protected]>

22 files changed, 253 insertions, 253 deletions

diff --git a/libk3b/projects/audiocd/k3baudiojob.cpp b/libk3b/projects/audiocd/k3baudiojob.cpp
index 8f59744..3f4026e 100644
--- a/libk3b/projects/audiocd/k3baudiojob.cpp
+++ b/libk3b/projects/audiocd/k3baudiojob.cpp
@@ -101,16 +101,16 @@ K3bAudioJob::K3bAudioJob( K3bAudioDoc* doc, K3bJobHandler* hdl, TQObject* parent
   d = new Private;
 
   m_audioImager = new K3bAudioImager( m_doc, this, this );
-  connect( m_audioImager, TQT_SIGNAL(infoMessage(const TQString&, int)), 
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_audioImager, TQT_SIGNAL(percent(int)), 
-	   this, TQT_SLOT(slotAudioDecoderPercent(int)) );
-  connect( m_audioImager, TQT_SIGNAL(subPercent(int)), 
-	   this, TQT_SLOT(slotAudioDecoderSubPercent(int)) );
-  connect( m_audioImager, TQT_SIGNAL(finished(bool)), 
-	   this, TQT_SLOT(slotAudioDecoderFinished(bool)) );
-  connect( m_audioImager, TQT_SIGNAL(nextTrack(int, int)), 
-	   this, TQT_SLOT(slotAudioDecoderNextTrack(int, int)) );
+  connect( m_audioImager, TQ_SIGNAL(infoMessage(const TQString&, int)), 
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_audioImager, TQ_SIGNAL(percent(int)), 
+	   this, TQ_SLOT(slotAudioDecoderPercent(int)) );
+  connect( m_audioImager, TQ_SIGNAL(subPercent(int)), 
+	   this, TQ_SLOT(slotAudioDecoderSubPercent(int)) );
+  connect( m_audioImager, TQ_SIGNAL(finished(bool)), 
+	   this, TQ_SLOT(slotAudioDecoderFinished(bool)) );
+  connect( m_audioImager, TQ_SIGNAL(nextTrack(int, int)), 
+	   this, TQ_SLOT(slotAudioDecoderNextTrack(int, int)) );
 
   m_writer = 0;
   m_tempData = new K3bAudioJobTempData( m_doc, this );
@@ -314,10 +314,10 @@ void K3bAudioJob::start()
       emit newSubTask( i18n("Determining maximum writing speed") );
       if( !m_maxSpeedJob ) {
 	m_maxSpeedJob = new K3bAudioMaxSpeedJob( m_doc, this, this );
-	connect( m_maxSpeedJob, TQT_SIGNAL(percent(int)), 
-		 this, TQT_SIGNAL(subPercent(int)) );
-	connect( m_maxSpeedJob, TQT_SIGNAL(finished(bool)), 
-		 this, TQT_SLOT(slotMaxSpeedJobFinished(bool)) );
+	connect( m_maxSpeedJob, TQ_SIGNAL(percent(int)), 
+		 this, TQ_SIGNAL(subPercent(int)) );
+	connect( m_maxSpeedJob, TQ_SIGNAL(finished(bool)), 
+		 this, TQ_SLOT(slotMaxSpeedJobFinished(bool)) );
       }
       m_maxSpeedJob->start();
       return;
@@ -562,20 +562,20 @@ bool K3bAudioJob::prepareWriter()
     m_writer = writer;
   }
 
-  connect( m_writer, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_writer, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotWriterJobPercent(int)) );
-  connect( m_writer, TQT_SIGNAL(processedSize(int, int)), this, TQT_SIGNAL(processedSize(int, int)) );
-  connect( m_writer, TQT_SIGNAL(subPercent(int)), this, TQT_SIGNAL(subPercent(int)) );
-  connect( m_writer, TQT_SIGNAL(processedSubSize(int, int)), this, TQT_SIGNAL(processedSubSize(int, int)) );
-  connect( m_writer, TQT_SIGNAL(nextTrack(int, int)), this, TQT_SLOT(slotWriterNextTrack(int, int)) );
-  connect( m_writer, TQT_SIGNAL(buffer(int)), this, TQT_SIGNAL(bufferStatus(int)) );
-  connect( m_writer, TQT_SIGNAL(deviceBuffer(int)), this, TQT_SIGNAL(deviceBuffer(int)) );
-  connect( m_writer, TQT_SIGNAL(writeSpeed(int, int)), this, TQT_SIGNAL(writeSpeed(int, int)) );
-  connect( m_writer, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotWriterFinished(bool)) );
-  //  connect( m_writer, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newTask(const TQString&)) );
-  connect( m_writer, TQT_SIGNAL(newSubTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( m_writer, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_writer, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotWriterJobPercent(int)) );
+  connect( m_writer, TQ_SIGNAL(processedSize(int, int)), this, TQ_SIGNAL(processedSize(int, int)) );
+  connect( m_writer, TQ_SIGNAL(subPercent(int)), this, TQ_SIGNAL(subPercent(int)) );
+  connect( m_writer, TQ_SIGNAL(processedSubSize(int, int)), this, TQ_SIGNAL(processedSubSize(int, int)) );
+  connect( m_writer, TQ_SIGNAL(nextTrack(int, int)), this, TQ_SLOT(slotWriterNextTrack(int, int)) );
+  connect( m_writer, TQ_SIGNAL(buffer(int)), this, TQ_SIGNAL(bufferStatus(int)) );
+  connect( m_writer, TQ_SIGNAL(deviceBuffer(int)), this, TQ_SIGNAL(deviceBuffer(int)) );
+  connect( m_writer, TQ_SIGNAL(writeSpeed(int, int)), this, TQ_SIGNAL(writeSpeed(int, int)) );
+  connect( m_writer, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotWriterFinished(bool)) );
+  //  connect( m_writer, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newTask(const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(newSubTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 
   return true;
 }
@@ -706,14 +706,14 @@ void K3bAudioJob::normalizeFiles()
   if( !m_normalizeJob ) {
     m_normalizeJob = new K3bAudioNormalizeJob( this, this );
 
-    connect( m_normalizeJob, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	     this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotNormalizeProgress(int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(subPercent(int)), this, TQT_SLOT(slotNormalizeSubProgress(int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotNormalizeJobFinished(bool)) );
-    connect( m_normalizeJob, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-    connect( m_normalizeJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	     this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+    connect( m_normalizeJob, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	     this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotNormalizeProgress(int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(subPercent(int)), this, TQ_SLOT(slotNormalizeSubProgress(int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotNormalizeJobFinished(bool)) );
+    connect( m_normalizeJob, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+    connect( m_normalizeJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	     this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
   }
 
   // add all the files
diff --git a/libk3b/projects/audiocd/k3baudionormalizejob.cpp b/libk3b/projects/audiocd/k3baudionormalizejob.cpp
index 0416f38..85fd698 100644
--- a/libk3b/projects/audiocd/k3baudionormalizejob.cpp
+++ b/libk3b/projects/audiocd/k3baudionormalizejob.cpp
@@ -49,8 +49,8 @@ void K3bAudioNormalizeJob::start()
     delete m_process;
 
   m_process = new K3bProcess();
-  connect( m_process, TQT_SIGNAL(stderrLine(const TQString&)), this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)), this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( m_process, TQ_SIGNAL(stderrLine(const TQString&)), this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)), this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
 
   const K3bExternalBin* bin = k3bcore->externalBinManager()->binObject( "normalize-audio" );
 
diff --git a/libk3b/projects/datacd/k3bdatajob.cpp b/libk3b/projects/datacd/k3bdatajob.cpp
index 356ab17..dcb5224 100644
--- a/libk3b/projects/datacd/k3bdatajob.cpp
+++ b/libk3b/projects/datacd/k3bdatajob.cpp
@@ -95,10 +95,10 @@ K3bDataJob::K3bDataJob( K3bDataDoc* doc, K3bJobHandler* hdl, TQObject* parent )
   m_isoImager = 0;
 
   m_msInfoFetcher = new K3bMsInfoFetcher( this, this );
-  connect( m_msInfoFetcher, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotMsInfoFetched(bool)) );
-  connect( m_msInfoFetcher, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_msInfoFetcher, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_msInfoFetcher, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotMsInfoFetched(bool)) );
+  connect( m_msInfoFetcher, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_msInfoFetcher, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 
   d->imageFinished = true;
 }
@@ -432,20 +432,20 @@ void K3bDataJob::slotWriterJobFinished( bool success )
     if( d->doc->verifyData() ) {
       if( !d->verificationJob ) {
 	d->verificationJob = new K3bVerificationJob( this, this );
-	connect( d->verificationJob, TQT_SIGNAL(infoMessage(const TQString&, int)),
-		 this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
- 	connect( d->verificationJob, TQT_SIGNAL(newTask(const TQString&)),
- 		 this, TQT_SIGNAL(newSubTask(const TQString&)) );
-	connect( d->verificationJob, TQT_SIGNAL(newSubTask(const TQString&)),
-		 this, TQT_SIGNAL(newSubTask(const TQString&)) );
-	connect( d->verificationJob, TQT_SIGNAL(percent(int)),
-		 this, TQT_SLOT(slotVerificationProgress(int)) );
-	connect( d->verificationJob, TQT_SIGNAL(percent(int)),
-		 this, TQT_SIGNAL(subPercent(int)) );
-	connect( d->verificationJob, TQT_SIGNAL(finished(bool)),
-		 this, TQT_SLOT(slotVerificationFinished(bool)) );
-	connect( d->verificationJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-		 this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+	connect( d->verificationJob, TQ_SIGNAL(infoMessage(const TQString&, int)),
+		 this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+ 	connect( d->verificationJob, TQ_SIGNAL(newTask(const TQString&)),
+ 		 this, TQ_SIGNAL(newSubTask(const TQString&)) );
+	connect( d->verificationJob, TQ_SIGNAL(newSubTask(const TQString&)),
+		 this, TQ_SIGNAL(newSubTask(const TQString&)) );
+	connect( d->verificationJob, TQ_SIGNAL(percent(int)),
+		 this, TQ_SLOT(slotVerificationProgress(int)) );
+	connect( d->verificationJob, TQ_SIGNAL(percent(int)),
+		 this, TQ_SIGNAL(subPercent(int)) );
+	connect( d->verificationJob, TQ_SIGNAL(finished(bool)),
+		 this, TQ_SLOT(slotVerificationFinished(bool)) );
+	connect( d->verificationJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+		 this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 
       }
       d->verificationJob->clear();
@@ -541,19 +541,19 @@ void K3bDataJob::setWriterJob( K3bAbstractWriter* writer )
 {
   // FIXME: progressedsize for multiple copies
   m_writerJob = writer;
-  connect( m_writerJob, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_writerJob, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotWriterJobPercent(int)) );
-  connect( m_writerJob, TQT_SIGNAL(processedSize(int, int)), this, TQT_SIGNAL(processedSize(int, int)) );
-  connect( m_writerJob, TQT_SIGNAL(subPercent(int)), this, TQT_SIGNAL(subPercent(int)) );
-  connect( m_writerJob, TQT_SIGNAL(processedSubSize(int, int)), this, TQT_SIGNAL(processedSubSize(int, int)) );
-  connect( m_writerJob, TQT_SIGNAL(nextTrack(int, int)), this, TQT_SLOT(slotWriterNextTrack(int, int)) );
-  connect( m_writerJob, TQT_SIGNAL(buffer(int)), this, TQT_SIGNAL(bufferStatus(int)) );
-  connect( m_writerJob, TQT_SIGNAL(deviceBuffer(int)), this, TQT_SIGNAL(deviceBuffer(int)) );
-  connect( m_writerJob, TQT_SIGNAL(writeSpeed(int, int)), this, TQT_SIGNAL(writeSpeed(int, int)) );
-  connect( m_writerJob, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotWriterJobFinished(bool)) );
-  connect( m_writerJob, TQT_SIGNAL(newSubTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( m_writerJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_writerJob, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_writerJob, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotWriterJobPercent(int)) );
+  connect( m_writerJob, TQ_SIGNAL(processedSize(int, int)), this, TQ_SIGNAL(processedSize(int, int)) );
+  connect( m_writerJob, TQ_SIGNAL(subPercent(int)), this, TQ_SIGNAL(subPercent(int)) );
+  connect( m_writerJob, TQ_SIGNAL(processedSubSize(int, int)), this, TQ_SIGNAL(processedSubSize(int, int)) );
+  connect( m_writerJob, TQ_SIGNAL(nextTrack(int, int)), this, TQ_SLOT(slotWriterNextTrack(int, int)) );
+  connect( m_writerJob, TQ_SIGNAL(buffer(int)), this, TQ_SIGNAL(bufferStatus(int)) );
+  connect( m_writerJob, TQ_SIGNAL(deviceBuffer(int)), this, TQ_SIGNAL(deviceBuffer(int)) );
+  connect( m_writerJob, TQ_SIGNAL(writeSpeed(int, int)), this, TQ_SIGNAL(writeSpeed(int, int)) );
+  connect( m_writerJob, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotWriterJobFinished(bool)) );
+  connect( m_writerJob, TQ_SIGNAL(newSubTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( m_writerJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 }
 
 
@@ -572,11 +572,11 @@ void K3bDataJob::setImager( K3bIsoImager* imager )
 void K3bDataJob::connectImager()
 {
   m_isoImager->disconnect( this );
-  connect( m_isoImager, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_isoImager, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotIsoImagerPercent(int)) );
-  connect( m_isoImager, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotIsoImagerFinished(bool)) );
-  connect( m_isoImager, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_isoImager, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_isoImager, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotIsoImagerPercent(int)) );
+  connect( m_isoImager, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotIsoImagerFinished(bool)) );
+  connect( m_isoImager, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 }
 
 
@@ -790,9 +790,9 @@ void K3bDataJob::determineMultiSessionMode()
     else {
       // now we need to determine the media's size
       connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::NG_DISKINFO, d->doc->burner() ),
-	       TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	       TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	       this,
-	       TQT_SLOT(slotDetermineMultiSessionMode(K3bDevice::DeviceHandler*)) );
+	       TQ_SLOT(slotDetermineMultiSessionMode(K3bDevice::DeviceHandler*)) );
     }
   }
   else {
diff --git a/libk3b/projects/datacd/k3bdatapreparationjob.cpp b/libk3b/projects/datacd/k3bdatapreparationjob.cpp
index a6b9e88..1598c3e 100644
--- a/libk3b/projects/datacd/k3bdatapreparationjob.cpp
+++ b/libk3b/projects/datacd/k3bdatapreparationjob.cpp
@@ -154,7 +154,7 @@ K3bDataPreparationJob::K3bDataPreparationJob( K3bDataDoc* doc, K3bJobHandler* hd
 {
   d = new Private( doc );
   d->threadJob = new K3bThreadJob( d, this, this );
-  connectSubJob( d->threadJob, TQT_SLOT(slotWorkDone(bool)), K3bJob::DEFAULT_SIGNAL_CONNECTION );
+  connectSubJob( d->threadJob, TQ_SLOT(slotWorkDone(bool)), K3bJob::DEFAULT_SIGNAL_CONNECTION );
 }
 
 
diff --git a/libk3b/projects/datacd/k3bisoimager.cpp b/libk3b/projects/datacd/k3bisoimager.cpp
index 2f750c5..f424e07 100644
--- a/libk3b/projects/datacd/k3bisoimager.cpp
+++ b/libk3b/projects/datacd/k3bisoimager.cpp
@@ -103,7 +103,7 @@ K3bIsoImager::K3bIsoImager( K3bDataDoc* doc, K3bJobHandler* hdl, TQObject* paren
   d = new Private();
   d->dataPreparationJob = new K3bDataPreparationJob( doc, this, this );
   connectSubJob( d->dataPreparationJob,
-		 TQT_SLOT(slotDataPreparationDone(bool)),
+		 TQ_SLOT(slotDataPreparationDone(bool)),
 		 DEFAULT_SIGNAL_CONNECTION );
 }
 
@@ -340,16 +340,16 @@ void K3bIsoImager::startSizeCalculation()
 
   // TODO: use K3bProcess::OutputCollector instead iof our own two slots.
 
-  connect( m_process, TQT_SIGNAL(receivedStderr(TDEProcess*, char*, int)),
-	   this, TQT_SLOT(slotCollectMkisofsPrintSizeStderr(TDEProcess*, char*, int)) );
-  connect( m_process, TQT_SIGNAL(stdoutLine(const TQString&)),
-	   this, TQT_SLOT(slotCollectMkisofsPrintSizeStdout(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)),
-	   this, TQT_SLOT(slotMkisofsPrintSizeFinished()) );
+  connect( m_process, TQ_SIGNAL(receivedStderr(TDEProcess*, char*, int)),
+	   this, TQ_SLOT(slotCollectMkisofsPrintSizeStderr(TDEProcess*, char*, int)) );
+  connect( m_process, TQ_SIGNAL(stdoutLine(const TQString&)),
+	   this, TQ_SLOT(slotCollectMkisofsPrintSizeStdout(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)),
+	   this, TQ_SLOT(slotMkisofsPrintSizeFinished()) );
 
   // we also want error messages
-  connect( m_process, TQT_SIGNAL(stderrLine( const TQString& )),
-	   this, TQT_SLOT(slotReceivedStderr( const TQString& )) );
+  connect( m_process, TQ_SIGNAL(stderrLine( const TQString& )),
+	   this, TQ_SLOT(slotReceivedStderr( const TQString& )) );
 
   m_collectedMkisofsPrintSizeStdout = TQString();
   m_collectedMkisofsPrintSizeStderr = TQString();
@@ -485,11 +485,11 @@ void K3bIsoImager::start()
     return;
   }
 
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)),
-	   this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)),
+	   this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
 
-  connect( m_process, TQT_SIGNAL(stderrLine( const TQString& )),
-	   this, TQT_SLOT(slotReceivedStderr( const TQString& )) );
+  connect( m_process, TQ_SIGNAL(stderrLine( const TQString& )),
+	   this, TQ_SLOT(slotReceivedStderr( const TQString& )) );
 
   //
   // Check the image file
diff --git a/libk3b/projects/datacd/k3bmsinfofetcher.cpp b/libk3b/projects/datacd/k3bmsinfofetcher.cpp
index cfbe58b..ce4b756 100644
--- a/libk3b/projects/datacd/k3bmsinfofetcher.cpp
+++ b/libk3b/projects/datacd/k3bmsinfofetcher.cpp
@@ -70,9 +70,9 @@ void K3bMsInfoFetcher::start()
   //
 
   connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::NG_DISKINFO, m_device ),
-	   TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	   TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	   this,
-	   TQT_SLOT(slotMediaDetectionFinished(K3bDevice::DeviceHandler*)) );
+	   TQ_SLOT(slotMediaDetectionFinished(K3bDevice::DeviceHandler*)) );
 }
 
 
@@ -116,12 +116,12 @@ void K3bMsInfoFetcher::getMsInfo()
     emit debuggingOutput( "msinfo command:", s );
 
 
-    //   connect( m_process, TQT_SIGNAL(receivedStderr(TDEProcess*, char*, int)),
-    // 	   this, TQT_SLOT(slotCollectOutput(TDEProcess*, char*, int)) );
-    connect( m_process, TQT_SIGNAL(receivedStdout(TDEProcess*, char*, int)),
-	     this, TQT_SLOT(slotCollectOutput(TDEProcess*, char*, int)) );
-    connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)),
-	     this, TQT_SLOT(slotProcessExited()) );
+    //   connect( m_process, TQ_SIGNAL(receivedStderr(TDEProcess*, char*, int)),
+    // 	   this, TQ_SLOT(slotCollectOutput(TDEProcess*, char*, int)) );
+    connect( m_process, TQ_SIGNAL(receivedStdout(TDEProcess*, char*, int)),
+	     this, TQ_SLOT(slotCollectOutput(TDEProcess*, char*, int)) );
+    connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)),
+	     this, TQ_SLOT(slotProcessExited()) );
 
     m_msInfo = TQString();
     m_collectedOutput = TQString();
diff --git a/libk3b/projects/datadvd/k3bdvdbooktypejob.cpp b/libk3b/projects/datadvd/k3bdvdbooktypejob.cpp
index 058e195..eb0631a 100644
--- a/libk3b/projects/datadvd/k3bdvdbooktypejob.cpp
+++ b/libk3b/projects/datadvd/k3bdvdbooktypejob.cpp
@@ -129,9 +129,9 @@ void K3bDvdBooktypeJob::start()
     emit newTask( i18n("Checking media") );
 
     connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::NG_DISKINFO, d->device ), 
-	     TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	     TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	     this, 
-	     TQT_SLOT(slotDeviceHandlerFinished(K3bDevice::DeviceHandler*)) );
+	     TQ_SLOT(slotDeviceHandlerFinished(K3bDevice::DeviceHandler*)) );
   }
   else {
     // change writer defaults
@@ -216,9 +216,9 @@ void K3bDvdBooktypeJob::slotProcessFinished( TDEProcess* p )
     else {
       emit infoMessage( i18n("Ejecting DVD..."), INFO );
       connect( K3bDevice::eject( d->device ), 
-	       TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	       TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	       this, 
-	       TQT_SLOT(slotEjectingFinished(K3bDevice::DeviceHandler*)) );
+	       TQ_SLOT(slotEjectingFinished(K3bDevice::DeviceHandler*)) );
     }
   }
   else {
@@ -280,8 +280,8 @@ void K3bDvdBooktypeJob::startBooktypeChange()
   d->process = new K3bProcess();
   d->process->setRunPrivileged(true);
   d->process->setSuppressEmptyLines(true);
-  connect( d->process, TQT_SIGNAL(stderrLine(const TQString&)), this, TQT_SLOT(slotStderrLine(const TQString&)) );
-  connect( d->process, TQT_SIGNAL(processExited(TDEProcess*)), this, TQT_SLOT(slotProcessFinished(TDEProcess*)) );
+  connect( d->process, TQ_SIGNAL(stderrLine(const TQString&)), this, TQ_SLOT(slotStderrLine(const TQString&)) );
+  connect( d->process, TQ_SIGNAL(processExited(TDEProcess*)), this, TQ_SLOT(slotProcessFinished(TDEProcess*)) );
 
   d->dvdBooktypeBin = k3bcore->externalBinManager()->binObject( "dvd+rw-booktype" );
   if( !d->dvdBooktypeBin ) {
diff --git a/libk3b/projects/datadvd/k3bdvdjob.cpp b/libk3b/projects/datadvd/k3bdvdjob.cpp
index c8cec08..38cdbe3 100644
--- a/libk3b/projects/datadvd/k3bdvdjob.cpp
+++ b/libk3b/projects/datadvd/k3bdvdjob.cpp
@@ -105,9 +105,9 @@ void K3bDvdJob::determineMultiSessionMode()
   }
   else {
      connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::NG_DISKINFO, m_doc->burner() ),
-	     TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	     TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	     this,
-	     TQT_SLOT(slotDetermineMultiSessionMode(K3bDevice::DeviceHandler*)) );
+	     TQ_SLOT(slotDetermineMultiSessionMode(K3bDevice::DeviceHandler*)) );
   }
 }
 
diff --git a/libk3b/projects/k3babstractwriter.cpp b/libk3b/projects/k3babstractwriter.cpp
index 26bf989..f2c65f2 100644
--- a/libk3b/projects/k3babstractwriter.cpp
+++ b/libk3b/projects/k3babstractwriter.cpp
@@ -55,8 +55,8 @@ void K3bAbstractWriter::cancel()
   if( burnDevice() ) {
     // we need to unlock the writer because cdrecord locked it while writing
     emit infoMessage( i18n("Unlocking drive..."), INFO );
-    connect( K3bDevice::unblock( burnDevice() ), TQT_SIGNAL(finished(bool)),
-	     this, TQT_SLOT(slotUnblockWhileCancellationFinished(bool)) );
+    connect( K3bDevice::unblock( burnDevice() ), TQ_SIGNAL(finished(bool)),
+	     this, TQ_SLOT(slotUnblockWhileCancellationFinished(bool)) );
   }
   else {
     emit canceled();
@@ -72,8 +72,8 @@ void K3bAbstractWriter::slotUnblockWhileCancellationFinished( bool success )
 
   if( k3bcore->globalSettings()->ejectMedia() ) {
     emit newSubTask( i18n("Ejecting CD") );  // FIXME: "media" instead of "CD"
-    connect( K3bDevice::eject( burnDevice() ), TQT_SIGNAL(finished(bool)),
-	     this, TQT_SLOT(slotEjectWhileCancellationFinished(bool)) );
+    connect( K3bDevice::eject( burnDevice() ), TQ_SIGNAL(finished(bool)),
+	     this, TQ_SLOT(slotEjectWhileCancellationFinished(bool)) );
   }
   else {
     emit canceled();
diff --git a/libk3b/projects/k3bcdrdaowriter.cpp b/libk3b/projects/k3bcdrdaowriter.cpp
index 42174c7..c9ae55b 100644
--- a/libk3b/projects/k3bcdrdaowriter.cpp
+++ b/libk3b/projects/k3bcdrdaowriter.cpp
@@ -146,8 +146,8 @@ K3bCdrdaoWriter::K3bCdrdaoWriter( K3bDevice::Device* dev, K3bJobHandler* hdl,
 {
   d = new Private();
   d->speedEst = new K3bThroughputEstimator( this );
-  connect( d->speedEst, TQT_SIGNAL(throughput(int)),
-	   this, TQT_SLOT(slotThroughput(int)) );
+  connect( d->speedEst, TQ_SIGNAL(throughput(int)),
+	   this, TQ_SLOT(slotThroughput(int)) );
 
   m_eject = k3bcore->globalSettings()->ejectMedia();
 
@@ -166,8 +166,8 @@ K3bCdrdaoWriter::K3bCdrdaoWriter( K3bDevice::Device* dev, K3bJobHandler* hdl,
     m_comSock->socketDevice()->setReceiveBufferSize(49152);
     // magic number from TQt documentation
     m_comSock->socketDevice()->setBlocking(false);
-    connect( m_comSock, TQT_SIGNAL(readyRead()),
-             this, TQT_SLOT(parseCdrdaoMessage()));
+    connect( m_comSock, TQ_SIGNAL(readyRead()),
+             this, TQ_SLOT(parseCdrdaoMessage()));
   }
 }
 
@@ -464,10 +464,10 @@ void K3bCdrdaoWriter::start()
   m_process->setRunPrivileged(true);
   m_process->setSplitStdout(false);
   m_process->setRawStdin(true);
-  connect( m_process, TQT_SIGNAL(stderrLine(const TQString&)),
-           this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)),
-           this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( m_process, TQ_SIGNAL(stderrLine(const TQString&)),
+           this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)),
+           this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
 
   m_canceled = false;
   m_knownError = false;
diff --git a/libk3b/projects/k3bcdrecordwriter.cpp b/libk3b/projects/k3bcdrecordwriter.cpp
index ce29051..230f8e6 100644
--- a/libk3b/projects/k3bcdrecordwriter.cpp
+++ b/libk3b/projects/k3bcdrecordwriter.cpp
@@ -74,8 +74,8 @@ K3bCdrecordWriter::K3bCdrecordWriter( K3bDevice::Device* dev, K3bJobHandler* hdl
 {
   d = new Private();
   d->speedEst = new K3bThroughputEstimator( this );
-  connect( d->speedEst, TQT_SIGNAL(throughput(int)),
-	   this, TQT_SLOT(slotThroughput(int)) );
+  connect( d->speedEst, TQ_SIGNAL(throughput(int)),
+	   this, TQ_SLOT(slotThroughput(int)) );
 
   m_process = 0;
   m_writingMode = K3b::TAO;
@@ -145,9 +145,9 @@ void K3bCdrecordWriter::prepareProcess()
   m_process->setSplitStdout(true);
   m_process->setSuppressEmptyLines(true);
   m_process->setRawStdin(true);  // we only use stdin when writing on-the-fly
-  connect( m_process, TQT_SIGNAL(stdoutLine(const TQString&)), this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(stderrLine(const TQString&)), this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)), this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( m_process, TQ_SIGNAL(stdoutLine(const TQString&)), this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(stderrLine(const TQString&)), this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)), this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
 
   m_cdrecordBinObject = k3bcore->externalBinManager()->binObject("cdrecord");
 
diff --git a/libk3b/projects/k3bdoc.cpp b/libk3b/projects/k3bdoc.cpp
index 2ae4880..c3d5cb8 100644
--- a/libk3b/projects/k3bdoc.cpp
+++ b/libk3b/projects/k3bdoc.cpp
@@ -45,7 +45,7 @@ K3bDoc::K3bDoc( TQObject* parent )
     m_modified(false),
     m_view(0)
 {
-  connect( this, TQT_SIGNAL(changed()), this, TQT_SLOT(slotChanged()) );
+  connect( this, TQ_SIGNAL(changed()), this, TQ_SLOT(slotChanged()) );
 }
 
 
diff --git a/libk3b/projects/k3bdvdrecordwriter.cpp b/libk3b/projects/k3bdvdrecordwriter.cpp
index 1079533..da05335 100644
--- a/libk3b/projects/k3bdvdrecordwriter.cpp
+++ b/libk3b/projects/k3bdvdrecordwriter.cpp
@@ -42,10 +42,10 @@ void K3bDvdrecordWriter::prepareProcess()
   m_process = new K3bProcess();
   m_process->setRunPrivileged(true);
   m_process->setSplitStdout(true);
-  connect( m_process, TQT_SIGNAL(stdoutLine(const TQString&)), this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(stderrLine(const TQString&)), this, TQT_SLOT(slotStdLine(const TQString&)) );
-  connect( m_process, TQT_SIGNAL(processExited(TDEProcess*)), this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
-  connect( m_process, TQT_SIGNAL(wroteStdin(TDEProcess*)), this, TQT_SIGNAL(dataWritten()) );
+  connect( m_process, TQ_SIGNAL(stdoutLine(const TQString&)), this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(stderrLine(const TQString&)), this, TQ_SLOT(slotStdLine(const TQString&)) );
+  connect( m_process, TQ_SIGNAL(processExited(TDEProcess*)), this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( m_process, TQ_SIGNAL(wroteStdin(TDEProcess*)), this, TQ_SIGNAL(dataWritten()) );
 
 //   if( k3bcore->externalBinManager()->binObject("cdrecord")->hasFeature( "dvd-patch" ) )
 //     m_cdrecordBinObject = k3bcore->externalBinManager()->binObject("cdrecord");
diff --git a/libk3b/projects/k3bgrowisofshandler.cpp b/libk3b/projects/k3bgrowisofshandler.cpp
index e25e758..24828b2 100644
--- a/libk3b/projects/k3bgrowisofshandler.cpp
+++ b/libk3b/projects/k3bgrowisofshandler.cpp
@@ -65,7 +65,7 @@ void K3bGrowisofsHandler::reset( K3bDevice::Device* dev, bool dao )
 
 void K3bGrowisofsHandler::handleStart()
 {
-//  TQTimer::singleShot( 2000, this, TQT_SLOT(slotCheckBufferStatus()) );
+//  TQTimer::singleShot( 2000, this, TQ_SLOT(slotCheckBufferStatus()) );
 }
 
 
@@ -298,9 +298,9 @@ void K3bGrowisofsHandler::handleExit( int exitCode )
 void K3bGrowisofsHandler::slotCheckBufferStatus()
 {
   connect( K3bDevice::sendCommand( K3bDevice::DeviceHandler::BUFFER_CAPACITY, m_device ),
-	   TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	   TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	   this,
-	   TQT_SLOT(slotCheckBufferStatusDone(K3bDevice::DeviceHandler*)) );
+	   TQ_SLOT(slotCheckBufferStatusDone(K3bDevice::DeviceHandler*)) );
 }
 
 
@@ -308,7 +308,7 @@ void K3bGrowisofsHandler::slotCheckBufferStatusDone( K3bDevice::DeviceHandler* d
 {
   if( dh->success() && dh->bufferCapacity() > 0 ) {
     emit deviceBuffer( 100 * (dh->bufferCapacity() - dh->availableBufferCapacity() ) / dh->bufferCapacity() );
-    TQTimer::singleShot( 500, this, TQT_SLOT(slotCheckBufferStatus()) );
+    TQTimer::singleShot( 500, this, TQ_SLOT(slotCheckBufferStatus()) );
   }
   else {
     kdDebug() << "(K3bGrowisofsHandler) stopping buffer check." << endl;
diff --git a/libk3b/projects/k3bgrowisofswriter.cpp b/libk3b/projects/k3bgrowisofswriter.cpp
index ebb26a4..dbbc97a 100644
--- a/libk3b/projects/k3bgrowisofswriter.cpp
+++ b/libk3b/projects/k3bgrowisofswriter.cpp
@@ -102,20 +102,20 @@ K3bGrowisofsWriter::K3bGrowisofsWriter( K3bDevice::Device* dev, K3bJobHandler* h
 {
   d = new Private;
   d->speedEst = new K3bThroughputEstimator( this );
-  connect( d->speedEst, TQT_SIGNAL(throughput(int)),
-	   this, TQT_SLOT(slotThroughput(int)) );
+  connect( d->speedEst, TQ_SIGNAL(throughput(int)),
+	   this, TQ_SLOT(slotThroughput(int)) );
 
   d->gh = new K3bGrowisofsHandler( this );
-  connect( d->gh, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this,TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( d->gh, TQT_SIGNAL(newSubTask(const TQString&)),
-	   this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( d->gh, TQT_SIGNAL(buffer(int)),
-	   this, TQT_SIGNAL(buffer(int)) );
-  connect( d->gh, TQT_SIGNAL(deviceBuffer(int)),
-	   this, TQT_SIGNAL(deviceBuffer(int)) );
-  connect( d->gh, TQT_SIGNAL(flushingCache()),
-	   this, TQT_SLOT(slotFlushingCache()) );
+  connect( d->gh, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this,TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( d->gh, TQ_SIGNAL(newSubTask(const TQString&)),
+	   this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( d->gh, TQ_SIGNAL(buffer(int)),
+	   this, TQ_SIGNAL(buffer(int)) );
+  connect( d->gh, TQ_SIGNAL(deviceBuffer(int)),
+	   this, TQ_SIGNAL(deviceBuffer(int)) );
+  connect( d->gh, TQ_SIGNAL(flushingCache()),
+	   this, TQ_SLOT(slotFlushingCache()) );
 }
 
 
@@ -182,9 +182,9 @@ bool K3bGrowisofsWriter::prepareProcess()
   //  d->process->setPriority( TDEProcess::PrioHighest );
   d->process->setSplitStdout(true);
   d->process->setRawStdin(true);
-  connect( d->process, TQT_SIGNAL(stderrLine(const TQString&)), this, TQT_SLOT(slotReceivedStderr(const TQString&)) );
-  connect( d->process, TQT_SIGNAL(stdoutLine(const TQString&)), this, TQT_SLOT(slotReceivedStderr(const TQString&)) );
-  connect( d->process, TQT_SIGNAL(processExited(TDEProcess*)), this, TQT_SLOT(slotProcessExited(TDEProcess*)) );
+  connect( d->process, TQ_SIGNAL(stderrLine(const TQString&)), this, TQ_SLOT(slotReceivedStderr(const TQString&)) );
+  connect( d->process, TQ_SIGNAL(stdoutLine(const TQString&)), this, TQ_SLOT(slotReceivedStderr(const TQString&)) );
+  connect( d->process, TQ_SIGNAL(processExited(TDEProcess*)), this, TQ_SLOT(slotProcessExited(TDEProcess*)) );
 
 
   //
@@ -394,8 +394,8 @@ void K3bGrowisofsWriter::start()
       if( d->usingRingBuffer ) {
 	if( !d->ringBuffer ) {
 	  d->ringBuffer = new K3bPipeBuffer( this, this );
-	  connect( d->ringBuffer, TQT_SIGNAL(percent(int)), this, TQT_SIGNAL(buffer(int)) );
-	  connect( d->ringBuffer, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotRingBufferFinished(bool)) );
+	  connect( d->ringBuffer, TQ_SIGNAL(percent(int)), this, TQ_SIGNAL(buffer(int)) );
+	  connect( d->ringBuffer, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotRingBufferFinished(bool)) );
 	}
 
 	d->ringBuffer->writeToFd( d->process->stdinFd() );
@@ -571,9 +571,9 @@ void K3bGrowisofsWriter::slotProcessExited( TDEProcess* p )
   else {
     emit newSubTask( i18n("Ejecting DVD") );
     connect( K3bDevice::eject( burnDevice() ),
-	     TQT_SIGNAL(finished(K3bDevice::DeviceHandler*)),
+	     TQ_SIGNAL(finished(K3bDevice::DeviceHandler*)),
 	     this,
-	     TQT_SLOT(slotEjectingFinished(K3bDevice::DeviceHandler*)) );
+	     TQ_SLOT(slotEjectingFinished(K3bDevice::DeviceHandler*)) );
   }
 }
 
diff --git a/libk3b/projects/mixedcd/k3bmixeddoc.cpp b/libk3b/projects/mixedcd/k3bmixeddoc.cpp
index 1c7533e..57ed105 100644
--- a/libk3b/projects/mixedcd/k3bmixeddoc.cpp
+++ b/libk3b/projects/mixedcd/k3bmixeddoc.cpp
@@ -37,10 +37,10 @@ K3bMixedDoc::K3bMixedDoc( TQObject* parent )
   m_dataDoc = new K3bDataDoc( this );
   m_audioDoc = new K3bAudioDoc( this );
 
-  connect( m_dataDoc, TQT_SIGNAL(changed()),
-	   this, TQT_SIGNAL(changed()) );
-  connect( m_audioDoc, TQT_SIGNAL(changed()),
-	   this, TQT_SIGNAL(changed()) );
+  connect( m_dataDoc, TQ_SIGNAL(changed()),
+	   this, TQ_SIGNAL(changed()) );
+  connect( m_audioDoc, TQ_SIGNAL(changed()),
+	   this, TQ_SIGNAL(changed()) );
 }
 
 
diff --git a/libk3b/projects/mixedcd/k3bmixedjob.cpp b/libk3b/projects/mixedcd/k3bmixedjob.cpp
index 7d5858e..9bc9f02 100644
--- a/libk3b/projects/mixedcd/k3bmixedjob.cpp
+++ b/libk3b/projects/mixedcd/k3bmixedjob.cpp
@@ -103,23 +103,23 @@ K3bMixedJob::K3bMixedJob( K3bMixedDoc* doc, K3bJobHandler* hdl, TQObject* parent
   d = new Private;
 
   m_isoImager = new K3bIsoImager( doc->dataDoc(), this, this );
-  connect( m_isoImager, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_isoImager, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotIsoImagerPercent(int)) );
-  connect( m_isoImager, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotIsoImagerFinished(bool)) );
-  connect( m_isoImager, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_isoImager, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_isoImager, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotIsoImagerPercent(int)) );
+  connect( m_isoImager, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotIsoImagerFinished(bool)) );
+  connect( m_isoImager, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 
   m_audioImager = new K3bAudioImager( doc->audioDoc(), this, this );
-  connect( m_audioImager, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_audioImager, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotAudioDecoderPercent(int)) );
-  connect( m_audioImager, TQT_SIGNAL(subPercent(int)), this, TQT_SLOT(slotAudioDecoderSubPercent(int)) );
-  connect( m_audioImager, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotAudioDecoderFinished(bool)) );
-  connect( m_audioImager, TQT_SIGNAL(nextTrack(int, int)), this, TQT_SLOT(slotAudioDecoderNextTrack(int, int)) );
+  connect( m_audioImager, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_audioImager, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotAudioDecoderPercent(int)) );
+  connect( m_audioImager, TQ_SIGNAL(subPercent(int)), this, TQ_SLOT(slotAudioDecoderSubPercent(int)) );
+  connect( m_audioImager, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotAudioDecoderFinished(bool)) );
+  connect( m_audioImager, TQ_SIGNAL(nextTrack(int, int)), this, TQ_SLOT(slotAudioDecoderNextTrack(int, int)) );
 
   m_msInfoFetcher = new K3bMsInfoFetcher( this, this );
-  connect( m_msInfoFetcher, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotMsInfoFetched(bool)) );
-  connect( m_msInfoFetcher, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_msInfoFetcher, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotMsInfoFetched(bool)) );
+  connect( m_msInfoFetcher, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
 
   m_writer = 0;
   m_tocFile = 0;
@@ -251,10 +251,10 @@ void K3bMixedJob::startFirstCopy()
 	// the maxspeed job gets the device from the doc:
 	m_doc->audioDoc()->setBurner( m_doc->burner() );
 	d->maxSpeedJob = new K3bAudioMaxSpeedJob( m_doc->audioDoc(), this, this );
-	connect( d->maxSpeedJob, TQT_SIGNAL(percent(int)),
-		 this, TQT_SIGNAL(subPercent(int)) );
-	connect( d->maxSpeedJob, TQT_SIGNAL(finished(bool)),
-		 this, TQT_SLOT(slotMaxSpeedJobFinished(bool)) );
+	connect( d->maxSpeedJob, TQ_SIGNAL(percent(int)),
+		 this, TQ_SIGNAL(subPercent(int)) );
+	connect( d->maxSpeedJob, TQ_SIGNAL(finished(bool)),
+		 this, TQ_SLOT(slotMaxSpeedJobFinished(bool)) );
       }
       d->maxSpeedJob->start();
     }
@@ -510,8 +510,8 @@ void K3bMixedJob::slotWriterFinished( bool success )
     // reload the media (as a subtask so the user does not see the "Flushing cache" or "Fixating" messages while
     // doing so
     emit newSubTask( i18n("Reloading the medium") );
-    connect( K3bDevice::reload( m_doc->burner() ), TQT_SIGNAL(finished(bool)),
-	     this, TQT_SLOT(slotMediaReloadedForSecondSession(bool)) );
+    connect( K3bDevice::reload( m_doc->burner() ), TQ_SIGNAL(finished(bool)),
+	     this, TQ_SLOT(slotMediaReloadedForSecondSession(bool)) );
   }
   else {
     d->copiesDone++;
@@ -690,20 +690,20 @@ bool K3bMixedJob::prepareWriter()
     m_writer = writer;
   }
 
-  connect( m_writer, TQT_SIGNAL(infoMessage(const TQString&, int)), this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_writer, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotWriterJobPercent(int)) );
-  connect( m_writer, TQT_SIGNAL(processedSize(int, int)), this, TQT_SIGNAL(processedSize(int, int)) );
-  connect( m_writer, TQT_SIGNAL(subPercent(int)), this, TQT_SIGNAL(subPercent(int)) );
-  connect( m_writer, TQT_SIGNAL(processedSubSize(int, int)), this, TQT_SIGNAL(processedSubSize(int, int)) );
-  connect( m_writer, TQT_SIGNAL(nextTrack(int, int)), this, TQT_SLOT(slotWriterNextTrack(int, int)) );
-  connect( m_writer, TQT_SIGNAL(buffer(int)), this, TQT_SIGNAL(bufferStatus(int)) );
-  connect( m_writer, TQT_SIGNAL(deviceBuffer(int)), this, TQT_SIGNAL(deviceBuffer(int)) );
-  connect( m_writer, TQT_SIGNAL(writeSpeed(int, int)), this, TQT_SIGNAL(writeSpeed(int, int)) );
-  connect( m_writer, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotWriterFinished(bool)) );
-  //  connect( m_writer, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newTask(const TQString&)) );
-  connect( m_writer, TQT_SIGNAL(newSubTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( m_writer, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(infoMessage(const TQString&, int)), this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_writer, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotWriterJobPercent(int)) );
+  connect( m_writer, TQ_SIGNAL(processedSize(int, int)), this, TQ_SIGNAL(processedSize(int, int)) );
+  connect( m_writer, TQ_SIGNAL(subPercent(int)), this, TQ_SIGNAL(subPercent(int)) );
+  connect( m_writer, TQ_SIGNAL(processedSubSize(int, int)), this, TQ_SIGNAL(processedSubSize(int, int)) );
+  connect( m_writer, TQ_SIGNAL(nextTrack(int, int)), this, TQ_SLOT(slotWriterNextTrack(int, int)) );
+  connect( m_writer, TQ_SIGNAL(buffer(int)), this, TQ_SIGNAL(bufferStatus(int)) );
+  connect( m_writer, TQ_SIGNAL(deviceBuffer(int)), this, TQ_SIGNAL(deviceBuffer(int)) );
+  connect( m_writer, TQ_SIGNAL(writeSpeed(int, int)), this, TQ_SIGNAL(writeSpeed(int, int)) );
+  connect( m_writer, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotWriterFinished(bool)) );
+  //  connect( m_writer, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newTask(const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(newSubTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( m_writer, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
 
   return true;
 }
@@ -1228,14 +1228,14 @@ void K3bMixedJob::normalizeFiles()
   if( !m_normalizeJob ) {
     m_normalizeJob = new K3bAudioNormalizeJob( this, this );
 
-    connect( m_normalizeJob, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	     this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(percent(int)), this, TQT_SLOT(slotNormalizeProgress(int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(subPercent(int)), this, TQT_SLOT(slotNormalizeSubProgress(int)) );
-    connect( m_normalizeJob, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotNormalizeJobFinished(bool)) );
-    connect( m_normalizeJob, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-    connect( m_normalizeJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	     this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+    connect( m_normalizeJob, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	     this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(percent(int)), this, TQ_SLOT(slotNormalizeProgress(int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(subPercent(int)), this, TQ_SLOT(slotNormalizeSubProgress(int)) );
+    connect( m_normalizeJob, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotNormalizeJobFinished(bool)) );
+    connect( m_normalizeJob, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+    connect( m_normalizeJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	     this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
   }
 
   // add all the files
diff --git a/libk3b/projects/movixcd/k3bmovixdoc.cpp b/libk3b/projects/movixcd/k3bmovixdoc.cpp
index 5379ba1..74a53d2 100644
--- a/libk3b/projects/movixcd/k3bmovixdoc.cpp
+++ b/libk3b/projects/movixcd/k3bmovixdoc.cpp
@@ -37,8 +37,8 @@
 K3bMovixDoc::K3bMovixDoc( TQObject* parent )
   : K3bDataDoc( parent )
 {
-  connect( this, TQT_SIGNAL(itemRemoved(K3bDataItem*)),
-	   this, TQT_SLOT(slotDataItemRemoved(K3bDataItem*)) );
+  connect( this, TQ_SIGNAL(itemRemoved(K3bDataItem*)),
+	   this, TQ_SLOT(slotDataItemRemoved(K3bDataItem*)) );
 }
 
 
diff --git a/libk3b/projects/movixcd/k3bmovixjob.cpp b/libk3b/projects/movixcd/k3bmovixjob.cpp
index 837fe0c..e23f24d 100644
--- a/libk3b/projects/movixcd/k3bmovixjob.cpp
+++ b/libk3b/projects/movixcd/k3bmovixjob.cpp
@@ -35,26 +35,26 @@ K3bMovixJob::K3bMovixJob( K3bMovixDoc* doc, K3bJobHandler* jh, TQObject* parent
   m_movixDocPreparer = new K3bMovixDocPreparer( doc, this, this );
 
   // pipe signals
-  connect( m_dataJob, TQT_SIGNAL(percent(int)), this, TQT_SIGNAL(percent(int)) );
-  connect( m_dataJob, TQT_SIGNAL(subPercent(int)), this, TQT_SIGNAL(subPercent(int)) );
-  connect( m_dataJob, TQT_SIGNAL(processedSubSize(int, int)), this, TQT_SIGNAL(processedSubSize(int, int)) );
-  connect( m_dataJob, TQT_SIGNAL(processedSize(int, int)), this, TQT_SIGNAL(processedSize(int, int)) );
-  connect( m_dataJob, TQT_SIGNAL(bufferStatus(int)), this, TQT_SIGNAL(bufferStatus(int)) );
-  connect( m_dataJob, TQT_SIGNAL(deviceBuffer(int)), this, TQT_SIGNAL(deviceBuffer(int)) );
-  connect( m_dataJob, TQT_SIGNAL(writeSpeed(int, int)), this, TQT_SIGNAL(writeSpeed(int, int)) );
-  connect( m_dataJob, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newTask(const TQString&)) );
-  connect( m_dataJob, TQT_SIGNAL(newSubTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( m_dataJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
-  connect( m_dataJob, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_dataJob, TQT_SIGNAL(burning(bool)), this, TQT_SIGNAL(burning(bool)) );
+  connect( m_dataJob, TQ_SIGNAL(percent(int)), this, TQ_SIGNAL(percent(int)) );
+  connect( m_dataJob, TQ_SIGNAL(subPercent(int)), this, TQ_SIGNAL(subPercent(int)) );
+  connect( m_dataJob, TQ_SIGNAL(processedSubSize(int, int)), this, TQ_SIGNAL(processedSubSize(int, int)) );
+  connect( m_dataJob, TQ_SIGNAL(processedSize(int, int)), this, TQ_SIGNAL(processedSize(int, int)) );
+  connect( m_dataJob, TQ_SIGNAL(bufferStatus(int)), this, TQ_SIGNAL(bufferStatus(int)) );
+  connect( m_dataJob, TQ_SIGNAL(deviceBuffer(int)), this, TQ_SIGNAL(deviceBuffer(int)) );
+  connect( m_dataJob, TQ_SIGNAL(writeSpeed(int, int)), this, TQ_SIGNAL(writeSpeed(int, int)) );
+  connect( m_dataJob, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newTask(const TQString&)) );
+  connect( m_dataJob, TQ_SIGNAL(newSubTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( m_dataJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_dataJob, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_dataJob, TQ_SIGNAL(burning(bool)), this, TQ_SIGNAL(burning(bool)) );
 
   // we need to clean up here
-  connect( m_dataJob, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotDataJobFinished(bool)) );
+  connect( m_dataJob, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotDataJobFinished(bool)) );
 
-  connect( m_movixDocPreparer, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_movixDocPreparer, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
 }
 
 
diff --git a/libk3b/projects/movixdvd/k3bmovixdvdjob.cpp b/libk3b/projects/movixdvd/k3bmovixdvdjob.cpp
index dfe8061..1b0c6c5 100644
--- a/libk3b/projects/movixdvd/k3bmovixdvdjob.cpp
+++ b/libk3b/projects/movixdvd/k3bmovixdvdjob.cpp
@@ -35,25 +35,25 @@ K3bMovixDvdJob::K3bMovixDvdJob( K3bMovixDvdDoc* doc, K3bJobHandler* jh, TQObject
   m_movixDocPreparer = new K3bMovixDocPreparer( doc, this, this );
 
   // pipe signals
-  connect( m_dvdJob, TQT_SIGNAL(percent(int)), this, TQT_SIGNAL(percent(int)) );
-  connect( m_dvdJob, TQT_SIGNAL(subPercent(int)), this, TQT_SIGNAL(subPercent(int)) );
-  connect( m_dvdJob, TQT_SIGNAL(processedSubSize(int, int)), this, TQT_SIGNAL(processedSubSize(int, int)) );
-  connect( m_dvdJob, TQT_SIGNAL(processedSize(int, int)), this, TQT_SIGNAL(processedSize(int, int)) );
-  connect( m_dvdJob, TQT_SIGNAL(bufferStatus(int)), this, TQT_SIGNAL(bufferStatus(int)) );
-  connect( m_dvdJob, TQT_SIGNAL(writeSpeed(int, int)), this, TQT_SIGNAL(writeSpeed(int, int)) );
-  connect( m_dvdJob, TQT_SIGNAL(newTask(const TQString&)), this, TQT_SIGNAL(newTask(const TQString&)) );
-  connect( m_dvdJob, TQT_SIGNAL(newSubTask(const TQString&)), this, TQT_SIGNAL(newSubTask(const TQString&)) );
-  connect( m_dvdJob, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
-	   this, TQT_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
-  connect( m_dvdJob, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
-  connect( m_dvdJob, TQT_SIGNAL(burning(bool)), this, TQT_SIGNAL(burning(bool)) );
+  connect( m_dvdJob, TQ_SIGNAL(percent(int)), this, TQ_SIGNAL(percent(int)) );
+  connect( m_dvdJob, TQ_SIGNAL(subPercent(int)), this, TQ_SIGNAL(subPercent(int)) );
+  connect( m_dvdJob, TQ_SIGNAL(processedSubSize(int, int)), this, TQ_SIGNAL(processedSubSize(int, int)) );
+  connect( m_dvdJob, TQ_SIGNAL(processedSize(int, int)), this, TQ_SIGNAL(processedSize(int, int)) );
+  connect( m_dvdJob, TQ_SIGNAL(bufferStatus(int)), this, TQ_SIGNAL(bufferStatus(int)) );
+  connect( m_dvdJob, TQ_SIGNAL(writeSpeed(int, int)), this, TQ_SIGNAL(writeSpeed(int, int)) );
+  connect( m_dvdJob, TQ_SIGNAL(newTask(const TQString&)), this, TQ_SIGNAL(newTask(const TQString&)) );
+  connect( m_dvdJob, TQ_SIGNAL(newSubTask(const TQString&)), this, TQ_SIGNAL(newSubTask(const TQString&)) );
+  connect( m_dvdJob, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)),
+	   this, TQ_SIGNAL(debuggingOutput(const TQString&, const TQString&)) );
+  connect( m_dvdJob, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_dvdJob, TQ_SIGNAL(burning(bool)), this, TQ_SIGNAL(burning(bool)) );
 
   // we need to clean up here
-  connect( m_dvdJob, TQT_SIGNAL(finished(bool)), this, TQT_SLOT(slotDvdJobFinished(bool)) );
+  connect( m_dvdJob, TQ_SIGNAL(finished(bool)), this, TQ_SLOT(slotDvdJobFinished(bool)) );
 
-  connect( m_movixDocPreparer, TQT_SIGNAL(infoMessage(const TQString&, int)),
-	   this, TQT_SIGNAL(infoMessage(const TQString&, int)) );
+  connect( m_movixDocPreparer, TQ_SIGNAL(infoMessage(const TQString&, int)),
+	   this, TQ_SIGNAL(infoMessage(const TQString&, int)) );
 }
 
 
diff --git a/libk3b/projects/videocd/k3bvcddoc.cpp b/libk3b/projects/videocd/k3bvcddoc.cpp
index eb40f16..590ef6b 100644
--- a/libk3b/projects/videocd/k3bvcddoc.cpp
+++ b/libk3b/projects/videocd/k3bvcddoc.cpp
@@ -59,11 +59,11 @@ K3bVcdDoc::K3bVcdDoc( TQObject* parent )
     m_vcdType = NONE;
 
     m_urlAddingTimer = new TQTimer( this );
-    connect( m_urlAddingTimer, TQT_SIGNAL( timeout() ), this, TQT_SLOT( slotWorkUrlQueue() ) );
+    connect( m_urlAddingTimer, TQ_SIGNAL( timeout() ), this, TQ_SLOT( slotWorkUrlQueue() ) );
 
     // FIXME: remove the newTracks() signal and replace it with the changed signal
-    connect( this, TQT_SIGNAL( newTracks() ), this, TQT_SIGNAL( changed() ) );
-    connect( this, TQT_SIGNAL( trackRemoved( K3bVcdTrack* ) ), this, TQT_SIGNAL( changed() ) );
+    connect( this, TQ_SIGNAL( newTracks() ), this, TQ_SIGNAL( changed() ) );
+    connect( this, TQ_SIGNAL( trackRemoved( K3bVcdTrack* ) ), this, TQ_SIGNAL( changed() ) );
 }
 
 K3bVcdDoc::~K3bVcdDoc()
diff --git a/libk3b/projects/videocd/k3bvcdjob.cpp b/libk3b/projects/videocd/k3bvcdjob.cpp
index d16e7e0..e801b01 100644
--- a/libk3b/projects/videocd/k3bvcdjob.cpp
+++ b/libk3b/projects/videocd/k3bvcdjob.cpp
@@ -225,12 +225,12 @@ void K3bVcdJob::vcdxBuild()
 
     *m_process << TQString( "%1" ).arg( TQFile::encodeName( m_xmlFile ).data() );
 
-    connect( m_process, TQT_SIGNAL( receivedStderr( TDEProcess*, char*, int ) ),
-             this, TQT_SLOT( slotParseVcdxBuildOutput( TDEProcess*, char*, int ) ) );
-    connect( m_process, TQT_SIGNAL( receivedStdout( TDEProcess*, char*, int ) ),
-             this, TQT_SLOT( slotParseVcdxBuildOutput( TDEProcess*, char*, int ) ) );
-    connect( m_process, TQT_SIGNAL( processExited( TDEProcess* ) ),
-             this, TQT_SLOT( slotVcdxBuildFinished() ) );
+    connect( m_process, TQ_SIGNAL( receivedStderr( TDEProcess*, char*, int ) ),
+             this, TQ_SLOT( slotParseVcdxBuildOutput( TDEProcess*, char*, int ) ) );
+    connect( m_process, TQ_SIGNAL( receivedStdout( TDEProcess*, char*, int ) ),
+             this, TQ_SLOT( slotParseVcdxBuildOutput( TDEProcess*, char*, int ) ) );
+    connect( m_process, TQ_SIGNAL( processExited( TDEProcess* ) ),
+             this, TQ_SLOT( slotVcdxBuildFinished() ) );
 
     // vcdxbuild commandline parameters
     kdDebug() << "***** vcdxbuild parameters:" << endl;
@@ -432,19 +432,19 @@ bool K3bVcdJob::prepareWriterJob()
 
     }
 
-    connect( m_writerJob, TQT_SIGNAL( infoMessage( const TQString&, int ) ), this, TQT_SIGNAL( infoMessage( const TQString&, int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( percent( int ) ), this, TQT_SLOT( slotWriterJobPercent( int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( processedSize( int, int ) ), this, TQT_SLOT( slotProcessedSize( int, int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( subPercent( int ) ), this, TQT_SIGNAL( subPercent( int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( processedSubSize( int, int ) ), this, TQT_SIGNAL( processedSubSize( int, int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( nextTrack( int, int ) ), this, TQT_SLOT( slotWriterNextTrack( int, int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( buffer( int ) ), this, TQT_SIGNAL( bufferStatus( int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( deviceBuffer( int ) ), this, TQT_SIGNAL( deviceBuffer( int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( writeSpeed( int, int ) ), this, TQT_SIGNAL( writeSpeed( int, int ) ) );
-    connect( m_writerJob, TQT_SIGNAL( finished( bool ) ), this, TQT_SLOT( slotWriterJobFinished( bool ) ) );
-    connect( m_writerJob, TQT_SIGNAL( newTask( const TQString& ) ), this, TQT_SIGNAL( newTask( const TQString& ) ) );
-    connect( m_writerJob, TQT_SIGNAL( newSubTask( const TQString& ) ), this, TQT_SIGNAL( newSubTask( const TQString& ) ) );
-    connect( m_writerJob, TQT_SIGNAL( debuggingOutput( const TQString&, const TQString& ) ), this, TQT_SIGNAL( debuggingOutput( const TQString&, const TQString& ) ) );
+    connect( m_writerJob, TQ_SIGNAL( infoMessage( const TQString&, int ) ), this, TQ_SIGNAL( infoMessage( const TQString&, int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( percent( int ) ), this, TQ_SLOT( slotWriterJobPercent( int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( processedSize( int, int ) ), this, TQ_SLOT( slotProcessedSize( int, int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( subPercent( int ) ), this, TQ_SIGNAL( subPercent( int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( processedSubSize( int, int ) ), this, TQ_SIGNAL( processedSubSize( int, int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( nextTrack( int, int ) ), this, TQ_SLOT( slotWriterNextTrack( int, int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( buffer( int ) ), this, TQ_SIGNAL( bufferStatus( int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( deviceBuffer( int ) ), this, TQ_SIGNAL( deviceBuffer( int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( writeSpeed( int, int ) ), this, TQ_SIGNAL( writeSpeed( int, int ) ) );
+    connect( m_writerJob, TQ_SIGNAL( finished( bool ) ), this, TQ_SLOT( slotWriterJobFinished( bool ) ) );
+    connect( m_writerJob, TQ_SIGNAL( newTask( const TQString& ) ), this, TQ_SIGNAL( newTask( const TQString& ) ) );
+    connect( m_writerJob, TQ_SIGNAL( newSubTask( const TQString& ) ), this, TQ_SIGNAL( newSubTask( const TQString& ) ) );
+    connect( m_writerJob, TQ_SIGNAL( debuggingOutput( const TQString&, const TQString& ) ), this, TQ_SIGNAL( debuggingOutput( const TQString&, const TQString& ) ) );
 
     return true;
 }