Further removal of automake files.r14.1.0

Signed-off-by: Michele Calgaro <[email protected]>

3 files changed, 0 insertions, 889 deletions

diff --git a/koffice-i18n-sr@Latn/install-sh b/koffice-i18n-sr@Latn/install-sh
deleted file mode 100755
index ca9c7c4c..00000000
--- a/koffice-i18n-sr@Latn/install-sh
+++ /dev/null
@@ -1,394 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2005-11-07.23
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Symbolic mode for testing mkdir with directories.
-# It is the same as 755, but also tests that "u+" works.
-test_mode=u=rwx,g=rx,o=rx,u+wx
-
-# Desired mode of installed file.
-mode=0755
-
-# Desired mode of newly created intermediate directories.
-# It is empty if not known yet.
-intermediate_mode=
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| \
-	     .       : '\(.\)' 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-		  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-		  /^X\(\/\/\)$/{ s//\1/; q; }
-		  /^X\(\/\).*/{ s//\1/; q; }
-		  s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	posix_mkdir=false
-	if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
-	  posix_mkdir=true
-	else
-	  # Remove any dirs left behind by ancient mkdir implementations.
-	  rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
-	fi ;;
-    esac
-
-    if
-      $posix_mkdir && {
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, create it using the same intermediate mode that
-	# mkdir -p would use when creating intermediate directories.
-	# POSIX says that this mode is "$(umask -S),u+wx", so use that
-	# if umask -S works.
-
-	if test -n "$dir_arg"; then
-	  mkdir_mode=$mode
-	else
-	  case $intermediate_mode in
-	    '')
-	      if umask_S=`(umask -S) 2>/dev/null`; then
-		intermediate_mode=$umask_S,u+wx
-	      else
-		intermediate_mode=$test_mode
-	      fi ;;
-	  esac
-	  mkdir_mode=$intermediate_mode
-	fi
-
-	$mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
-      }
-    then :
-    else
-
-      # mkdir does not conform to POSIX, or it failed possibly due to
-      # a race condition.  Create the directory the slow way, step by
-      # step, checking for races as we go.
-
-      case $dstdir in
-	/*) pathcomp=/ ;;
-	-*) pathcomp=./ ;;
-	*)  pathcomp= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      for d
-      do
-	test "x$d" = x && continue
-
-	pathcomp=$pathcomp$d
-	if test ! -d "$pathcomp"; then
-	  $mkdirprog "$pathcomp"
-	  # Don't fail if two instances are running concurrently.
-	  test -d "$pathcomp" || exit 1
-	fi
-	pathcomp=$pathcomp/
-      done
-      obsolete_mkdir_used=true
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
diff --git a/koffice-i18n-sr@Latn/missing b/koffice-i18n-sr@Latn/missing
deleted file mode 100755
index d55d3ad4..00000000
--- a/koffice-i18n-sr@Latn/missing
+++ /dev/null
@@ -1,346 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2004-09-07.08
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <[email protected]>."
-    exit 0
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit 0
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
diff --git a/koffice-i18n-sr@Latn/mkinstalldirs b/koffice-i18n-sr@Latn/mkinstalldirs
deleted file mode 100755
index 6ac3d96b..00000000
--- a/koffice-i18n-sr@Latn/mkinstalldirs
+++ /dev/null
@@ -1,149 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2005-06-29.22
-
-# Original author: Noah Friedman <[email protected]>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <[email protected]> or send patches to
-# <[email protected]>.
-
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <[email protected]>."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage"
-      exit $?
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --version)
-      echo "$0 $scriptversion"
-      exit $?
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error.  This is a problem when calling mkinstalldirs
-# from a parallel make.  We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
-  '')
-    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    else
-      # On NextStep and OpenStep, the `mkdir' command does not
-      # recognize any option.  It will interpret all options as
-      # directories to create, and then abort because `.' already
-      # exists.
-      test -d ./-p && rmdir ./-p
-      test -d ./--version && rmdir ./--version
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
-       test ! -d ./--version; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    else
-      # Clean up after NextStep and OpenStep mkdir.
-      for d in ./-m ./-p ./--version "./$dirmode";
-      do
-        test -d $d && rmdir $d
-      done
-    fi
-    ;;
-esac
-
-for file
-do
-  case $file in
-    /*) pathcomp=/ ;;
-    *)  pathcomp= ;;
-  esac
-  oIFS=$IFS
-  IFS=/
-  set fnord $file
-  shift
-  IFS=$oIFS
-
-  for d
-  do
-    test "x$d" = x && continue
-
-    pathcomp=$pathcomp$d
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-	errstatus=$lasterr
-      else
-	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-	  lasterr=
-	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-	  if test ! -z "$lasterr"; then
-	    errstatus=$lasterr
-	  fi
-	fi
-      fi
-    fi
-
-    pathcomp=$pathcomp/
-  done
-done
-
-exit $errstatus