Additional k => tde renaming and fixes

21 files changed, 47 insertions, 47 deletions

diff --git a/AUTHORS b/AUTHORS
index 6d1d418..5d5dc88 100644
--- a/AUTHORS
+++ b/AUTHORS
@@ -12,7 +12,7 @@ o Philipp Hullmann fixed many bugs in the todo conduit.
 o David Bishop converted most of the UI to Qt Designer .ui.
 o Reinhold Kainhofer fixed and extended the VCal conduits when it was 
   really needed.
-o The addressbook conduit was rewritten by R. Kainhofer to use libkabc 
+o The addressbook conduit was rewritten by R. Kainhofer to use libtdeabc 
 o The time conduit, the MAL conduit (AvantGo) and the PalmDOC conduit 
   were also written by R. Kainhofer
 o Aaron J. Seigo, Jorg Habenicht, and others contributed too.
diff --git a/Documentation/ConduitProgrammingTutorial/index.tex b/Documentation/ConduitProgrammingTutorial/index.tex
index 89dd599..35bdc00 100644
--- a/Documentation/ConduitProgrammingTutorial/index.tex
+++ b/Documentation/ConduitProgrammingTutorial/index.tex
@@ -1572,7 +1572,7 @@ point of view
 
 > 1) Do I understand it right from the ksync proposal on pim.kde.org that
 > kitchensync is the application that does all the communication with the
-> "devices" (korganizer, palm, opie, kabc, local files etc.), while ksync is
+> "devices" (korganizer, palm, opie, tdeabc, local files etc.), while ksync is
 > just the abstract library with the sync algorithm framework?
 
 It's a bit more.
diff --git a/admin b/admin
-Subproject b4d585c643d92787bfa17b935ce00b09960ee36
+Subproject 6b7f7225eff4c49b2dd71804d5fdacb03efcf46
diff --git a/conduits/abbrowserconduit/CMakeLists.txt b/conduits/abbrowserconduit/CMakeLists.txt
index 07b65e1..e89c097 100644
--- a/conduits/abbrowserconduit/CMakeLists.txt
+++ b/conduits/abbrowserconduit/CMakeLists.txt
@@ -6,7 +6,7 @@ set(conduit_abbrowser_SRCS
 	resolutionDialog.cc
 	abbrowser-factory.cc
 	abbrowser-setup.cc
-	kabcRecord.cc
+	tdeabcRecord.cc
 	abbrowser-conduit.cc
 )
 
@@ -23,7 +23,7 @@ kde3_add_kcfg_files(conduit_abbrowser_SRCS ${conduit_abbrowser_KCFGS})
 trinity_add_ui_files(conduit_abbrowser_SRCS ${conduit_abbrowser_UIS})
 trinity_automoc(${conduit_abbrowser_SRCS})
 add_library(conduit_address SHARED ${conduit_abbrowser_SRCS})
-target_link_libraries(conduit_address kabc_file kabc)
+target_link_libraries(conduit_address tdeabc_file tdeabc)
 set_target_properties(conduit_address PROPERTIES LOCATION ${KDE3_PLUGIN_INSTALL_DIR}
 	INSTALL_RPATH ${CMAKE_INSTALL_PREFIX}/lib
 	PREFIX ""
diff --git a/conduits/abbrowserconduit/Makefile.am b/conduits/abbrowserconduit/Makefile.am
index 708a0ee..8aaf6a1 100644
--- a/conduits/abbrowserconduit/Makefile.am
+++ b/conduits/abbrowserconduit/Makefile.am
@@ -9,7 +9,7 @@ conduit_address_la_SOURCES = \
 	resolutionDialog.cc \
 	abbrowser-factory.cc \
 	abbrowser-setup.cc \
-	kabcRecord.cc \
+	tdeabcRecord.cc \
 	abbrowser-conduit.cc
 conduit_address_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
 conduit_address_la_LIBADD = ../../lib/libkpilot.la -ltdeabc -ltdeabc_file
@@ -18,7 +18,7 @@ servicedir = $(kde_servicesdir)
 service_DATA = abbrowser_conduit.desktop
 kde_kcfg_DATA = abbrowserconduit.kcfg
 
-kabcustompagedir = $(kde_datadir)/kaddressbook/contacteditorpages
-kabcustompage_DATA = KPilotCustomFieldEditor.ui
+tdeabcustompagedir = $(kde_datadir)/kaddressbook/contacteditorpages
+tdeabcustompage_DATA = KPilotCustomFieldEditor.ui
 
 METASOURCES = AUTO
diff --git a/conduits/abbrowserconduit/abbrowser-conduit.cc b/conduits/abbrowserconduit/abbrowser-conduit.cc
index f89e78f..c4441b1 100644
--- a/conduits/abbrowserconduit/abbrowser-conduit.cc
+++ b/conduits/abbrowserconduit/abbrowser-conduit.cc
@@ -5,7 +5,7 @@
 ** Copyright (C) 2007 by Adriaan de Groot <[email protected]>
 **
 ** The abbrowser conduit copies addresses from the Pilot's address book to
-** the KDE addressbook maintained via the kabc library.
+** the KDE addressbook maintained via the tdeabc library.
 */
 
 /*
@@ -49,7 +49,7 @@
 #include "resolutionDialog.h"
 #include "resolutionTable.h"
 #include "abbrowserSettings.h"
-#include "kabcRecord.h"
+#include "tdeabcRecord.h"
 
 #include "abbrowser-conduit.moc"
 
@@ -765,7 +765,7 @@ void AbbrowserConduit::slotDeletedRecord()
 	Addressee e = aBook->findByUid(uid);
 
 		DEBUGKPILOT << fname << ": now looking at palm id: ["
-					<< id << "], kabc uid: [" << uid << "]." << endl;
+					<< id << "], tdeabc uid: [" << uid << "]." << endl;
 
 	PilotAddress*backupAddr=0L;
 	if (backupRec)
@@ -1234,13 +1234,13 @@ bool AbbrowserConduit::_savePCAddr(Addressee &pcAddr, PilotAddress*,
 	long pilotIdL = pilotId.toLong();
 	if(!pilotId.isEmpty())
 	{
-		// because we maintain a mapping between pilotId -> kabc uid, whenever we add
+		// because we maintain a mapping between pilotId -> tdeabc uid, whenever we add
 		// a new relationship, we have to remove any old mapping that would tie a different
-		// pilot id -> this kabc uid
+		// pilot id -> this tdeabc uid
 		TQMap < recordid_t, TQString>::iterator it;
 		for ( it = addresseeMap.begin(); it != addresseeMap.end(); ++it ) {
-			TQString kabcUid = it.data();
-			if (kabcUid == pcAddr.uid()) {
+			TQString tdeabcUid = it.data();
+			if (tdeabcUid == pcAddr.uid()) {
 				addresseeMap.remove(it);
 				break;
 			}
@@ -1348,7 +1348,7 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
 		for (TQStringList::Iterator it = piEmails.begin(); it != piEmails.end(); it++) {
 			if (!abEmails.contains(*it))
 			{
-		DEBUGKPILOT << fname  << ": kabc e-mail missing" << endl;
+		DEBUGKPILOT << fname  << ": tdeabc e-mail missing" << endl;
 			return false;
 			}
 		}
@@ -1359,7 +1359,7 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
 
 		PhoneNumber::List abPhones(abEntry.phoneNumbers());
 		PhoneNumber::List piPhones = TDEABCSync::getPhoneNumbers(*piAddress);
-		// first make sure that all of the pilot phone numbers are in kabc
+		// first make sure that all of the pilot phone numbers are in tdeabc
 		for (PhoneNumber::List::Iterator it = piPhones.begin(); it != piPhones.end(); it++) {
 			PhoneNumber piPhone = *it;
 			bool found=false;
@@ -1375,11 +1375,11 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
 				}
 			}
 			if (!found) {
-		DEBUGKPILOT << fname  << ": not equal because kabc phone not found." << endl;
+		DEBUGKPILOT << fname  << ": not equal because tdeabc phone not found." << endl;
 				return false;
 			}
 		}
-		// now the other way.  *cringe*  kabc has the capacity to store way more addresses
+		// now the other way.  *cringe*  tdeabc has the capacity to store way more addresses
 		// than the Pilot, so this might give false positives more than we'd want....
 		for (PhoneNumber::List::Iterator it = abPhones.begin(); it != abPhones.end(); it++) {
 			PhoneNumber abPhone = *it;
diff --git a/conduits/abbrowserconduit/abbrowser-conduit.h b/conduits/abbrowserconduit/abbrowser-conduit.h
index 652915c..3f017eb 100644
--- a/conduits/abbrowserconduit/abbrowser-conduit.h
+++ b/conduits/abbrowserconduit/abbrowser-conduit.h
@@ -35,7 +35,7 @@
 #include <pilotAddress.h>
 #include <plugin.h>
 
-#include "kabcRecord.h"
+#include "tdeabcRecord.h"
 
 
 class ResolutionTable;
diff --git a/conduits/abbrowserconduit/kabcRecord.cc b/conduits/abbrowserconduit/tdeabcRecord.cc
index dae2539..275450d 100644
--- a/conduits/abbrowserconduit/kabcRecord.cc
+++ b/conduits/abbrowserconduit/tdeabcRecord.cc
@@ -5,7 +5,7 @@
 ** Copyright (C) 2007 by Adriaan de Groot <[email protected]>
 **
 ** The abbrowser conduit copies addresses from the Pilot's address book to
-** the KDE addressbook maintained via the kabc library. This file
+** the KDE addressbook maintained via the tdeabc library. This file
 ** deals with the actual copying of HH addresses to KABC addresses
 ** and back again.
 */
@@ -38,7 +38,7 @@
 #include <tdeglobal.h>
 #include <tdeabc/addressee.h>
 
-#include "kabcRecord.h"
+#include "tdeabcRecord.h"
 
 /**
  * Okay, this is so that we can map the Pilot phone types to Phone Number
@@ -590,9 +590,9 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
 	// the other phone number fields
 	toAbEntry.setEmails(fromPiAddr.getEmails());
 
-	// going from Pilot to kabc, we need to clear out all phone records in kabc
+	// going from Pilot to tdeabc, we need to clear out all phone records in tdeabc
 	// so that they can be set from the Pilot.  If we do not do this, then records
-	// will be left in kabc when they are removed from the Pilot and we'll look
+	// will be left in tdeabc when they are removed from the Pilot and we'll look
 	// broken.
 	TDEABC::PhoneNumber::List old = toAbEntry.phoneNumbers();
 	for (TDEABC::PhoneNumber::List::Iterator it = old.begin(); it != old.end(); ++it) {
@@ -600,7 +600,7 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
 		toAbEntry.removePhoneNumber(phone);
 	}
 
-	// now, get the phone numbers from the Pilot and set them one at a time in kabc
+	// now, get the phone numbers from the Pilot and set them one at a time in tdeabc
 	TDEABC::PhoneNumber::List phones = TDEABCSync::getPhoneNumbers(fromPiAddr);
 	for (TDEABC::PhoneNumber::List::Iterator it = phones.begin(); it != phones.end(); ++it) {
 		TDEABC::PhoneNumber phone = *it;
@@ -618,9 +618,9 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
 	TDEABCSync::setFieldFromHHOtherPhone(toAbEntry,
 		fromPiAddr.getPhoneField(PilotAddressInfo::eOther),syncSettings);
 
-	// going from Pilot to kabc, we need to clear out all addresses in kabc
+	// going from Pilot to tdeabc, we need to clear out all addresses in tdeabc
 	// so that they can be set from the Pilot.  If we do not do this, then records
-	// will be left in kabc when they are removed from the Pilot and we'll look
+	// will be left in tdeabc when they are removed from the Pilot and we'll look
 	// broken.
 	TDEABC::Address::List oAddr = toAbEntry.addresses();
 	for (TDEABC::Address::List::Iterator it = oAddr.begin(); it != oAddr.end(); ++it) {
diff --git a/conduits/abbrowserconduit/kabcRecord.h b/conduits/abbrowserconduit/tdeabcRecord.h
index 4efb10d..390a212 100644
--- a/conduits/abbrowserconduit/kabcRecord.h
+++ b/conduits/abbrowserconduit/tdeabcRecord.h
@@ -1,5 +1,5 @@
-#ifndef _KPILOT_KABCRECORD_H
-#define _KPILOT_KABCRECORD_H
+#ifndef _KPILOT_TDEABCRECORD_H
+#define _KPILOT_TDEABCRECORD_H
 /* KPilot
 **
 ** Copyright (C) 2000,2001 by Dan Pilone
@@ -7,7 +7,7 @@
 ** Copyright (C) 2007 by Adriaan de Groot <[email protected]>
 **
 ** The abbrowser conduit copies addresses from the Pilot's address book to
-** the KDE addressbook maintained via the kabc library. This file
+** the KDE addressbook maintained via the tdeabc library. This file
 ** deals with the actual copying of HH addresses to KABC addresses
 ** and back again.
 */
diff --git a/conduits/configure.in.in b/conduits/configure.in.in
index db7d8d7..ae2359d 100644
--- a/conduits/configure.in.in
+++ b/conduits/configure.in.in
@@ -23,7 +23,7 @@ dnl
 dnl
 dnl Questions and comments can be sent to [email protected]
 dnl
-dnl This was copied and adapted from kabc's ldap configure.in.in
+dnl This was copied and adapted from tdeabc's ldap configure.in.in
 
 
 AC_DEFUN([KPILOT_CHECK_MAL],
diff --git a/conduits/docconduit/CMakeLists.txt b/conduits/docconduit/CMakeLists.txt
index 8793b28..72e6445 100644
--- a/conduits/docconduit/CMakeLists.txt
+++ b/conduits/docconduit/CMakeLists.txt
@@ -58,7 +58,7 @@ kde3_add_kcfg_files(kpalmdoc_SRCS kpalmdocSettings.kcfgc)
 trinity_add_ui_files(kpalmdoc_SRCS kpalmdoc_dlgbase.ui)
 trinity_automoc(${kpalmdoc_SRCS})
 add_executable(kpalmdoc ${kpalmdoc_SRCS})
-target_link_libraries(kpalmdoc ${QT_LIBRARIES} kpilot tdeui kio)
+target_link_libraries(kpalmdoc ${QT_LIBRARIES} kpilot tdeui tdeio)
 kpilot_rpath(kpalmdoc)
 
 install(
diff --git a/conduits/docconduit/Makefile.am b/conduits/docconduit/Makefile.am
index 617df41..2e1f79c 100644
--- a/conduits/docconduit/Makefile.am
+++ b/conduits/docconduit/Makefile.am
@@ -28,7 +28,7 @@ conduit_doc_la_LIBADD = ../../lib/libkpilot.la libpalmdoc_shared.la \
 ##libpalmdoc_shared.la
 
 kpalmdoc_SOURCES = kpalmdocSettings.kcfgc kpalmdoc_dlgbase.ui kpalmdoc_dlg.cc kpalmdoc.cpp
-kpalmdoc_LDFLAGS = $(PISOCK_LDFLAGS) $(PISOCK_LIB) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
+kpalmdoc_LDFLAGS = $(PISOCK_LDFLAGS) $(PISOCK_LIB) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
 kpalmdoc_LDADD = $(LIB_TDEFILE) $(PISOCK_LDFLAGS) $(PISOCK_LIB) ../../lib/libkpilot.la libpalmdoc_shared.la
 
 xdg_apps_DATA = kpalmdoc.desktop
diff --git a/conduits/notepadconduit/Makefile.am b/conduits/notepadconduit/Makefile.am
index 1e2c35c..33ab473 100644
--- a/conduits/notepadconduit/Makefile.am
+++ b/conduits/notepadconduit/Makefile.am
@@ -10,5 +10,5 @@ kde_module_LTLIBRARIES = conduit_notepad.la
 conduit_notepad_la_SOURCES = notepadconduit.kcfgc notepad-setup.ui \
 	notepad-conduit.cc notepad-factory.cc
 conduit_notepad_la_LDFLAGS= -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
-conduit_notepad_la_LIBADD= ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_KIO)
+conduit_notepad_la_LIBADD= ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_TDEIO)
 
diff --git a/conduits/popmail/Makefile.am b/conduits/popmail/Makefile.am
index 3a87f22..cc1e444 100644
--- a/conduits/popmail/Makefile.am
+++ b/conduits/popmail/Makefile.am
@@ -17,7 +17,7 @@ conduit_popmail_la_SOURCES = popmailSettings.kcfgc setup-dialog.ui \
 	popmail-factory.cc setupDialog.cc \
 	popmail-conduit.cc
 conduit_popmail_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui -lDCOP
-conduit_popmail_la_LIBADD  =  ../../lib/libkpilot.la $(LIB_KIO)
+conduit_popmail_la_LIBADD  =  ../../lib/libkpilot.la $(LIB_TDEIO)
 
 # this option you can leave out. Just, if you use "make dist", you need it
 noinst_HEADERS = popmail-conduit.h setupDialog.h
diff --git a/conduits/sysinfoconduit/Makefile.am b/conduits/sysinfoconduit/Makefile.am
index b1f87be..d8f48ae 100644
--- a/conduits/sysinfoconduit/Makefile.am
+++ b/conduits/sysinfoconduit/Makefile.am
@@ -16,7 +16,7 @@ conduit_sysinfo_la_SOURCES = sysinfoSettings.kcfgc \
 	sysinfo-conduit.cc \
 	sysinfo-setup_dialog.ui
 conduit_sysinfo_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
-conduit_sysinfo_la_LIBADD = ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_KIO)
+conduit_sysinfo_la_LIBADD = ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_TDEIO)
 
 kpilot_sysinfo_data_DATA = Template.html Template.txt
 kpilot_sysinfo_datadir = $(kde_datadir)/kpilot/sysinfoconduit
diff --git a/kpilot/CMakeLists.txt b/kpilot/CMakeLists.txt
index 8f10499..5144077 100644
--- a/kpilot/CMakeLists.txt
+++ b/kpilot/CMakeLists.txt
@@ -79,7 +79,7 @@ kde3_add_dcop_skels(kpilotTest_SRCS loggerDCOP.h)
 
 trinity_automoc(${kpilotTest_SRCS})
 add_executable(kpilotTest ${kpilotTest_SRCS})
-target_link_libraries(kpilotTest ${QT_LIBRARIES} kpilot tdeui kio)
+target_link_libraries(kpilotTest ${QT_LIBRARIES} kpilot tdeui tdeio)
 kpilot_rpath(kpilotTest)
 
 ###
@@ -99,7 +99,7 @@ kde3_add_dcop_skels(kpilotDaemon_SRCS loggerDCOP.h pilotDaemonDCOP.h)
 kde3_add_dcop_stubs(kpilotDaemon_SRCS loggerDCOP.h kpilotDCOP.h)
 trinity_automoc(${kpilotDaemon_SRCS})
 add_executable(kpilotDaemon ${kpilotDaemon_SRCS})
-target_link_libraries(kpilotDaemon ${QT_LIBRARIES} kpilot tdeui kio)
+target_link_libraries(kpilotDaemon ${QT_LIBRARIES} kpilot tdeui tdeio)
 kpilot_rpath(kpilotDaemon)
 
 ###
@@ -137,7 +137,7 @@ kde3_add_dcop_skels(kpilot_SRCS loggerDCOP.h kpilotDCOP.h)
 kde3_add_dcop_stubs(kpilot_SRCS pilotDaemonDCOP.h)
 trinity_automoc(${kpilot_SRCS})
 add_executable(kpilot_bin ${kpilot_SRCS})
-target_link_libraries(kpilot_bin ${QT_LIBRARIES} kpilot tdeutils tdeui kio)
+target_link_libraries(kpilot_bin ${QT_LIBRARIES} kpilot tdeutils tdeui tdeio)
 kpilot_rpath(kpilot_bin)
 set_target_properties(kpilot_bin PROPERTIES
 	OUTPUT_NAME kpilot
diff --git a/kpilot/Makefile.am b/kpilot/Makefile.am
index 6e71abc..e715651 100644
--- a/kpilot/Makefile.am
+++ b/kpilot/Makefile.am
@@ -18,7 +18,7 @@ METASOURCES = AUTO
 INCLUDES= $(PISOCK_INCLUDE) -I$(top_srcdir)/lib $(all_includes)
 
 libconfiguration_la_SOURCES = kpilotConfig.cc kpilotSettings.kcfgc
-libconfiguration_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
+libconfiguration_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
 
 kcm_kpilot_la_SOURCES = pilotDaemonDCOP.stub  kpilotConfigDialog.cc \
 	kpilotConfigDialog_device.ui \
@@ -35,7 +35,7 @@ kcm_kpilot_la_SOURCES = pilotDaemonDCOP.stub  kpilotConfigDialog.cc \
 	kpilotConfigWizard_app.ui \
 	kpilotConfigWizard.cc \
 	dbSelectionDialog.cc dbSelection_base.ui
-kcm_kpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor -module -avoid-version -no-undefined
+kcm_kpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor -module -avoid-version -no-undefined
 kcm_kpilot_la_LIBADD = $(LIB_TDEFILE) $(PISOCK_LIB) \
 	../lib/libkpilot.la \
 	libconfiguration.la
@@ -68,9 +68,9 @@ kpilotTest_SOURCES = \
 	main-test.cc
 
 
-kpilot_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
-kpilotDaemon_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
-kpilotTest_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
+kpilot_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
+kpilotDaemon_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
+kpilotTest_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
 
 
 # the libraries to link against. Be aware of the order. First the libraries,
diff --git a/lib/CMakeLists.txt b/lib/CMakeLists.txt
index 27378f4..ff15f2f 100644
--- a/lib/CMakeLists.txt
+++ b/lib/CMakeLists.txt
@@ -55,7 +55,7 @@ set(lib_SRCS
 trinity_automoc(${lib_SRCS})
 kde3_add_kcfg_files(lib_SRCS kpilotlibSettings.kcfgc)
 add_library(kpilot SHARED ${lib_SRCS})
-target_link_libraries(kpilot ${PILOTLINK_LIBRARY} ${QT_LIBRARIES} tdeui kio)
+target_link_libraries(kpilot ${PILOTLINK_LIBRARY} ${QT_LIBRARIES} tdeui tdeio)
 kpilot_rpath(kpilot)
 
 #---------- INSTALL -----------------------*
diff --git a/lib/Makefile.am b/lib/Makefile.am
index dba5780..2da70b3 100644
--- a/lib/Makefile.am
+++ b/lib/Makefile.am
@@ -29,7 +29,7 @@ libkpilot_la_SOURCES = kpilotlibSettings.kcfgc \
 	pilotTodoEntry.cc
 
 libkpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) -no-undefined $(all_libraries) $(KDE_EXTRA_RPATH) $(KDE_RPATH)
-libkpilot_la_LIBADD = $(PISOCK_LIB) $(LIB_TDEUI) $(LIB_TDEABC) -lkcal $(LIB_QT) $(LIB_TDECORE) -lDCOP $(LIB_KIO)
+libkpilot_la_LIBADD = $(PISOCK_LIB) $(LIB_TDEUI) $(LIB_TDEABC) -lkcal $(LIB_QT) $(LIB_TDECORE) -lDCOP $(LIB_TDEIO)
 
 kpilotincludedir = $(includedir)/kpilot
 kpilotinclude_HEADERS = \
diff --git a/lib/kpilotlink.h b/lib/kpilotlink.h
index bfb8e92..c2fde40 100644
--- a/lib/kpilotlink.h
+++ b/lib/kpilotlink.h
@@ -118,7 +118,7 @@ class PilotDatabase;
 * Sometimes, however, periods of inactivity cannot be avoided --
 * for instance, if you _have_ to ask the user something during a
 * sync, or if you are fetching a large amount of data from a slow
-* source (libkabc can do that, if your addressbook is on an LDAP
+* source (libtdeabc can do that, if your addressbook is on an LDAP
 * server). During these periods of inactivity (as far as the Pilot
 * can tell), you can "tickle" the Pilot to keep it awake. This
 * prevents the communications from being shut down. It's not
diff --git a/tests/CMakeLists.txt b/tests/CMakeLists.txt
index 8ad47a8..eaad4db 100644
--- a/tests/CMakeLists.txt
+++ b/tests/CMakeLists.txt
@@ -50,6 +50,6 @@ endif (HAVE_CALENDARLOCAL_H)
 
 set(importaddresses_SRCS importaddresses.cc)
 trinity_add_executable(importaddresses ${importaddresses_SRCS})
-target_link_libraries(importaddresses kpilot ${QT_LIBRARIES} kabc kabc_file)
+target_link_libraries(importaddresses kpilot ${QT_LIBRARIES} tdeabc tdeabc_file)
 add_test(importaddresses ${EXECUTABLE_OUTPUT_PATH}/importaddresses)