Copy translations to a new directory layout.

Use common rules for build and install translations.
Use common rules for build and install documentation.
Added translation of .desktop files.

Signed-off-by: Slávek Banko <[email protected]>

1 files changed, 6015 insertions, 0 deletions

diff --git a/translations/messages/zh_CN.po b/translations/messages/zh_CN.po
new file mode 100644
index 0000000..4e4d90f
--- /dev/null
+++ b/translations/messages/zh_CN.po
@@ -0,0 +1,6015 @@
+# translation of kpilot.po to zh_CN
+# translation of kpilot.po to Simplified Chinese
+# Copyright (C) 2002,2003 Free Software Foundation, Inc.
+# Li ZongLiang <[email protected]>, 2002.
+# Sarah Smith <[email protected]>, 2002.
+# Xiong Jiang <[email protected]>, 2002,2003
+# Funda Wang <[email protected]>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kpilot\n"
+"POT-Creation-Date: 2021-07-07 18:32+0000\n"
+"PO-Revision-Date: 2005-02-15 13:32+0800\n"
+"Last-Translator: Funda Wang <[email protected]>\n"
+"Language-Team: zh_CN <[email protected]>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0\n"
+
+#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "开源软件国际化之 TDE 简体中文组"
+
+#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "[email protected]"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
+#: conduits/malconduit/mal-factory.cpp:70
+msgid "MAL Synchronization Conduit for KPilot"
+msgstr "KPilot 的 MAL 同步管道"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
+#: conduits/malconduit/mal-factory.cpp:72
+msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
+msgstr "把 MAL 服务器中的内容(如 AvantGo)同步到手持设备"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
+#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
+#: conduits/memofileconduit/memofile-factory.cpp:69
+#: conduits/notepadconduit/notepad-factory.cpp:73
+#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
+#: conduits/timeconduit/time-setup.cpp:54
+msgid "Primary Author"
+msgstr "主要作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
+#: conduits/malconduit/mal-factory.cpp:78
+msgid "Author of libmal and the JPilot AvantGo conduit"
+msgstr "libmal 和 JPilot AvantGo 管道的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
+#: conduits/malconduit/mal-factory.cpp:80
+msgid "Author of syncmal"
+msgstr "syncmal 的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
+#: conduits/malconduit/mal-factory.cpp:82
+msgid "Authors of the malsync library (c) 1997-1999"
+msgstr "malsync 库的作者 (c) 1997-1999"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
+msgid "Addressbook"
+msgstr "地址簿"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:298
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened. Please make "
+"sure to supply a valid file name in the conduit's configuration dialog. "
+"Aborting the conduit."
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
+msgid "Unable to initialize and load the addressbook for the sync."
+msgstr "无法初始化及装入同步所需的地址簿。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
+#, fuzzy
+msgid "Unable to lock addressbook for writing.  Can't sync!"
+msgstr "无法初始化及装入同步所需的地址簿。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the "
+"temporary local file \"%2\" manually"
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
+msgid "Unable to open the addressbook databases on the handheld."
+msgstr "无法打开手持设备上的地址簿数据库。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
+msgid "Unable to open the addressbook."
+msgstr "无法打开地址簿。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
+msgid "Item on PC"
+msgstr "PC 上的内容"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
+msgid "Handheld"
+msgstr "手持设备"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
+msgid "Last sync"
+msgstr "上次同步"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
+msgid "Last name"
+msgstr "姓："
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
+msgid "First name"
+msgstr "名"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
+msgid "Organization"
+msgstr "组织"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
+msgid "Title"
+msgstr "头衔"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
+msgid "Note"
+msgstr "备忘"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
+msgid "Custom 1"
+msgstr "定制 1"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
+msgid "Custom 2"
+msgstr "定制 2"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
+msgid "Custom 3"
+msgstr "定制 3"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
+msgid "Custom 4"
+msgstr "定制 4"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
+msgid "Work Phone"
+msgstr "工作电话"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
+msgid "Home Phone"
+msgstr "家庭电话"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
+msgid "Mobile Phone"
+msgstr "移动电话"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
+msgid "Fax"
+msgstr "传真"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
+msgid "Pager"
+msgstr "传呼"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
+msgid "Other"
+msgstr "其它"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
+msgid "Email"
+msgstr "电子邮件"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
+msgid "Address"
+msgstr "地址"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
+msgid "City"
+msgstr "城市"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
+msgid "Region"
+msgstr "地区"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
+msgid "Postal code"
+msgstr "邮政编码"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
+msgid "Country"
+msgstr "国家"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
+msgid "Category"
+msgstr "类别"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
+msgid ""
+"The following address entry was changed, but does no longer exist on the "
+"handheld. Please resolve this conflict:"
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
+msgid ""
+"The following address entry was changed, but does no longer exist on the PC. "
+"Please resolve this conflict:"
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
+msgid ""
+"The following address entry was changed on the handheld as well as on the PC "
+"side. The changes could not be merged automatically, so please resolve the "
+"conflict yourself:"
+msgstr ""
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
+msgid "Address conflict"
+msgstr "地址冲突"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
+msgid "Abbrowser Conduit for KPilot"
+msgstr "KPilot 的 Abbrowser 管道"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
+msgid "Configures the Abbrowser Conduit for KPilot"
+msgstr "配置 KPilot 的 Abbrowser 管道"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
+#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
+#: conduits/vcalconduit/todo-setup.cpp:59
+#: conduits/vcalconduit/todo-setup.cpp:63
+#: conduits/vcalconduit/vcal-setup.cpp:50
+#: conduits/vcalconduit/vcal-setup.cpp:54 kpilot/kpilot.cpp:1027
+#: kpilot/pilotDaemon.cpp:1323
+msgid "Maintainer"
+msgstr "维护者"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
+#: conduits/knotes/knotes-factory.cpp:77
+msgid "UI"
+msgstr "UI"
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:162
+msgid ""
+"_: Entries in the resolution dialog. First the name of the field, then the "
+"entry from the Handheld or PC after the colon\n"
+"%1: %2"
+msgstr "%1：%2"
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:164
+msgid ""
+"_: Denoting newlines in Address entries. No need to translate\n"
+" | "
+msgstr " | "
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:214
+#: conduits/abbrowserconduit/resolutionDialog.cpp:220
+msgid "Delete entry"
+msgstr "删除记录"
+
+#: conduits/docconduit/DOC-converter.cpp:198
+msgid "Unable to open text file %1 for reading."
+msgstr "无法打开文本文件 %1 进行读取。"
+
+#: conduits/docconduit/DOC-converter.cpp:383
+msgid "Unable to open Database for writing"
+msgstr "无法打开数据库进行写入"
+
+#: conduits/docconduit/DOC-converter.cpp:440
+#, c-format
+msgid "Unable to open palm doc database %1"
+msgstr "无法打开 palm doc 数据库 %1"
+
+#: conduits/docconduit/DOC-converter.cpp:510
+#, fuzzy
+msgid "No filename set for the conversion"
+msgstr "未指定转换用的文件名"
+
+#: conduits/docconduit/DOC-converter.cpp:515
+#, fuzzy
+msgid "Unable to open Database for reading"
+msgstr "无法打开数据库进行读取"
+
+#: conduits/docconduit/DOC-converter.cpp:523
+#, c-format
+msgid "Unable to read database header for database %1."
+msgstr "无法读取数据库 %1 的数据库头部信息。"
+
+#: conduits/docconduit/DOC-converter.cpp:543
+#, c-format
+msgid "Unable to open output file %1."
+msgstr "无法打开输出文件 %1。"
+
+#: conduits/docconduit/DOC-converter.cpp:558
+msgid "Could not read text record #%1 from Database %2"
+msgstr "无法从数据库 %2 读取文本记录 #%1"
+
+#: conduits/docconduit/DOC-converter.cpp:577
+msgid "Could not read bookmark record #%1 from Database %2"
+msgstr "无法从数据库 %2 读取书签记录 #%1"
+
+#: conduits/docconduit/DOC-converter.cpp:594
+msgid "Unable to open file %1 for the bookmarks of %2."
+msgstr "无法为书签 %2 打开文件 %1。"
+
+#: conduits/docconduit/doc-conduit.cpp:84
+msgid "DOC"
+msgstr "DOC"
+
+#: conduits/docconduit/doc-conduit.cpp:272
+msgid "Searching for texts and databases to synchronize"
+msgstr "搜索要同步的文本和数据库"
+
+#: conduits/docconduit/doc-conduit.cpp:332
+msgid "Database created."
+msgstr "数据库已创建。"
+
+#: conduits/docconduit/doc-conduit.cpp:380
+msgid "Unable to install the locally created PalmDOC %1 to the handheld."
+msgstr "无法安装本地创建的 PalmDOC %1 到手持设备。"
+
+#: conduits/docconduit/doc-conduit.cpp:383
+msgid "Conversion of PalmDOC \"%1\" failed."
+msgstr "转换 PalmDOC“%1”失败。"
+
+#: conduits/docconduit/doc-conduit.cpp:391
+#, c-format
+msgid "Unable to open or create the database %1."
+msgstr "无法打开或创建数据库 %1。"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:147
+#: conduits/docconduit/doc-conduit.cpp:625
+#: conduits/docconduit/doc-setupdialog.ui:401
+#, no-c-format
+msgid "Conflict Resolution"
+msgstr "冲突解决方案"
+
+#: conduits/docconduit/doc-conduit.cpp:630
+msgid "Sync aborted by user."
+msgstr "同步已被用户中止。"
+
+#: conduits/docconduit/doc-conduit.cpp:668
+msgid "Synchronizing text \"%1\""
+msgstr "正在同步文本“%1”"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:53
+#, fuzzy
+msgid ""
+"Here is a list of all text files and DOC databases the conduit found. The "
+"conduit tried to determine the correct sync direction, but for databases in "
+"bold red letters a conflict occurred (i.e. the text was changed both on the "
+"desktop and on the handheld). For these databases please specify which "
+"version is the current one."
+msgstr ""
+"此处列出管道发现的所有文本文件和 DOC 数据库。管道已尝试确定正确的同步方向，但"
+"是在红色粗体字显示的数据库中发现冲突(即，文本同时在台式机和手持机上发生改"
+"变)。对这些数据库请指定哪边的版本是最新的。"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:57
+msgid ""
+"You can also change the sync direction for databases without a conflict."
+msgstr "不用管道您也可以改变数据库同步的方向。"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:61
+msgid "DOC Databases"
+msgstr "DOC 数据库"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:106
+msgid "No Sync"
+msgstr "无同步"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:107
+msgid "Sync Handheld to PC"
+msgstr "手持设备同步到 PC"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:108
+msgid "Sync PC to Handheld"
+msgstr "PC 同步到手持设备"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:109
+msgid "Delete Both Databases"
+msgstr "删除两个数据库"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:113
+msgid "More Info..."
+msgstr "更多信息..."
+
+#: conduits/docconduit/doc-conflictdialog.cpp:155
+msgid "unchanged"
+msgstr "无改变"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:156
+msgid "new"
+msgstr "新的"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:157
+msgid "changed"
+msgstr "已改变"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:158
+msgid "only bookmarks changed"
+msgstr "只有书签已改变"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:159
+msgid "deleted"
+msgstr "已删除"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:160
+msgid "does not exist"
+msgstr "不存在"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
+msgid "unknown"
+msgstr "未知"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:171
+msgid ""
+"Status of the database %1:\n"
+"\n"
+msgstr ""
+"数据库 %1 的状态：\n"
+"\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:172
+msgid "Handheld: %1\n"
+msgstr "手持设备：%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:173
+msgid "Desktop: %1\n"
+msgstr "台式机：%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:175
+msgid "Database information"
+msgstr "数据库信息"
+
+#: conduits/docconduit/doc-conflictdialog.h:60
+msgid "Resolution Dialog"
+msgstr ""
+
+#: conduits/docconduit/doc-factory.cpp:63
+msgid "Palm DOC Conduit for KPilot"
+msgstr "KPilot 的 Palm DOC 管道"
+
+#: conduits/docconduit/doc-factory.cpp:64
+msgid "Configures the DOC Conduit for KPilot"
+msgstr "配置 KPilot 的 DOC 管道"
+
+#: conduits/docconduit/doc-setup.cpp:64
+msgid "Palm DOC"
+msgstr "Palm DOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:42
+msgid "KPalmDOC"
+msgstr "KPalmDOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:45
+msgid "Main Developer"
+msgstr "主要开发者"
+
+#: conduits/docconduit/kpalmdoc.cpp:47
+msgid "Maintainer of KPilot"
+msgstr "KPilot 的维护者"
+
+#: conduits/docconduit/kpalmdoc.cpp:54
+msgid "PalmDOC Converter"
+msgstr "PalmDOC 转换器"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:178
+#: conduits/docconduit/kpalmdoc_dlg.cpp:214
+#: conduits/docconduit/kpalmdoc_dlg.cpp:327
+#: conduits/docconduit/kpalmdoc_dlg.cpp:352
+msgid ""
+"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
+"<br>Use folder <em>%2</em> instead?</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:181
+#: conduits/docconduit/kpalmdoc_dlg.cpp:217
+#: conduits/docconduit/kpalmdoc_dlg.cpp:330
+#: conduits/docconduit/kpalmdoc_dlg.cpp:356
+#, fuzzy
+msgid "Use Folder"
+msgstr "文本文件夹(&T)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:194
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"folder.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:203
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"directory.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:231
+msgid ""
+"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:254
+#: conduits/docconduit/kpalmdoc_dlg.cpp:392
+msgid "The following texts were successfully converted:"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:255
+#: conduits/docconduit/kpalmdoc_dlg.cpp:393
+msgid "Conversion Successful"
+msgstr "转换成功"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:259
+#: conduits/docconduit/kpalmdoc_dlg.cpp:397
+msgid "No text files were converted correctly"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:269
+#: conduits/docconduit/kpalmdoc_dlg.cpp:407
+msgid "<qt>The file <em>%1</em> does not exist.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:285
+#: conduits/docconduit/kpalmdoc_dlg.cpp:415
+msgid "Conversion of file %1 successful."
+msgstr "转换文件 %1 成功。"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:342
+msgid ""
+"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:369
+msgid ""
+"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:437
+msgid "&Text folder:"
+msgstr "文本文件夹(&T)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:438
+msgid "&PalmDOC folder:"
+msgstr "PalmDOC 文件夹(&P)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:442
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:66
+#, no-c-format
+msgid "&Text file:"
+msgstr "文本文件(&T)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:443
+msgid "&DOC file:"
+msgstr "DOC 文件(&D)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:458
+msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:459
+#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
+#: kpilot/logWidget.cpp:343
+#, fuzzy
+msgid "Overwrite"
+msgstr "覆盖(&O)"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:484
+#: conduits/docconduit/kpalmdoc_dlg.cpp:520
+msgid "<qt>Error while converting the text %1.</qt>"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:503
+msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr ""
+
+#: conduits/knotes/knotes-action.cpp:232
+#, fuzzy
+msgid "Could not open MemoDB on the handheld."
+msgstr "无法打开手持设备上的备忘数据库。"
+
+#: conduits/knotes/knotes-action.cpp:272
+#, fuzzy, c-format
+msgid "Could not load the resource at: %1"
+msgstr "无法载入管道 %1。"
+
+#: conduits/knotes/knotes-action.cpp:808
+#, c-format
+msgid ""
+"_n: Added one new memo.\n"
+"Added %n new memos."
+msgstr "添加了 %n 份新备忘录。"
+
+#: conduits/knotes/knotes-action.cpp:814
+#, c-format
+msgid ""
+"_n: Modified one memo.\n"
+"Modified %n memos."
+msgstr "修改了 %n 份备忘录。"
+
+#: conduits/knotes/knotes-action.cpp:821
+#, fuzzy, c-format
+msgid ""
+"_n: Deleted one memo.\n"
+"Deleted %n memos."
+msgstr "从 KNotes 中删除 %n 个便笺。"
+
+#: conduits/knotes/knotes-action.cpp:827
+#, fuzzy, c-format
+msgid ""
+"_n: Added one note to KNotes.\n"
+"Added %n notes to KNotes."
+msgstr "给 KNotes 添加了 %n 份新备忘录。"
+
+#: conduits/knotes/knotes-action.cpp:833
+#, c-format
+msgid ""
+"_n: Modified one note in KNotes.\n"
+"Modified %n notes in KNotes."
+msgstr "在 KNotes 中修改了 %n 个便笺。"
+
+#: conduits/knotes/knotes-action.cpp:839
+#, fuzzy, c-format
+msgid ""
+"_n: Deleted one note from KNotes.\n"
+"Deleted %n notes from KNotes."
+msgstr "从 KNotes 中删除 %n 个便笺。"
+
+#: conduits/knotes/knotes-action.cpp:844
+msgid "No change to KNotes."
+msgstr "KNotes 未更改。"
+
+#: conduits/knotes/knotes-factory.cpp:67
+msgid "KNotes Conduit for KPilot"
+msgstr "KPilot 的 KNotes 管道"
+
+#: conduits/knotes/knotes-factory.cpp:69
+msgid "Configures the KNotes Conduit for KPilot"
+msgstr "配置 KPilot 的 KNotes 管道"
+
+#: conduits/knotes/knotes-setup.cpp:59
+msgid "KNotes"
+msgstr "KNotes"
+
+#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
+msgid "MAL"
+msgstr "MAL"
+
+#: conduits/malconduit/mal-conduit.cpp:193
+msgid ""
+"Skipping MAL sync, because last synchronization was not long enough ago."
+msgstr "跳过 MAL 同步，因为与上次同步所间隔的时间还不够长。"
+
+#: conduits/malconduit/mal-conduit.cpp:202
+msgid "MAL synchronization failed (no SyncInfo)."
+msgstr "MAL 同步失败(没有同步信息)。"
+
+#: conduits/malconduit/mal-conduit.cpp:217
+msgid "No proxy server is set."
+msgstr "未设定代理服务器。"
+
+#: conduits/malconduit/mal-conduit.cpp:220
+#, c-format
+msgid "Using proxy server: %1"
+msgstr "使用代理服务器：%1"
+
+#: conduits/malconduit/mal-conduit.cpp:259
+msgid "No SOCKS proxy is set."
+msgstr "未设定 SOCKS 代理服务器。"
+
+#: conduits/malconduit/mal-conduit.cpp:262
+#, c-format
+msgid "Using SOCKS proxy: %1"
+msgstr "使用 SOCKS 代理：%1"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:70
+#: conduits/memofileconduit/memofile-factory.cpp:61
+#, fuzzy
+msgid "Memofile"
+msgstr "备忘录查看器"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:101
+msgid "Unable to open the memo databases on the handheld."
+msgstr "无法打开手持设备上的备忘数据库。"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:109
+msgid "Cannot initialize from pilot."
+msgstr ""
+
+#: conduits/memofileconduit/memofile-conduit.cpp:116
+msgid "Cannot initialize the memo files from disk."
+msgstr ""
+
+#: conduits/memofileconduit/memofile-conduit.cpp:123
+#, c-format
+msgid " Syncing with %1."
+msgstr " 与 %1 同步。"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:126
+msgid " Copying Pilot to PC..."
+msgstr " 将 Pilot 复制到 PC..."
+
+#: conduits/memofileconduit/memofile-conduit.cpp:131
+msgid " Copying PC to Pilot..."
+msgstr " 将 PC 复制到 Pilot..."
+
+#: conduits/memofileconduit/memofile-conduit.cpp:135
+msgid " Doing regular sync..."
+msgstr " 执行常规同步..."
+
+#: conduits/memofileconduit/memofile-factory.cpp:63
+#, fuzzy
+msgid "Memofile Conduit for KPilot"
+msgstr "KPilot 的 Mail 管道"
+
+#: conduits/memofileconduit/memofile-factory.cpp:65
+#, fuzzy
+msgid "Configures the Memofile Conduit for KPilot"
+msgstr "配置 KPilot 的 Mail 管道"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:59
+#: conduits/notepadconduit/notepad-factory.cpp:89
+msgid "Notepad"
+msgstr "记事本"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
+#, c-format
+msgid "Unable to open %1"
+msgstr "无法打开 %1"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:105
+#, c-format
+msgid ""
+"_n: 1 notepad could not be saved\n"
+"%n notepads could not be saved"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-conduit.cpp:106
+#, c-format
+msgid ""
+"_n: 1 notepad saved\n"
+"%n notepads saved"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-factory.cpp:67
+msgid "Saves notepads to png files"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-factory.cpp:69
+msgid "Configures the Notepad Conduit for KPilot"
+msgstr "配置 KPilot 的记事本管道"
+
+#: conduits/notepadconduit/notepad-factory.cpp:78
+msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
+msgstr ""
+
+#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
+msgid "Null"
+msgstr ""
+
+#: conduits/null/null-conduit.cpp:81
+msgid "NULL conduit is programmed to fail."
+msgstr ""
+
+#: conduits/null/null-factory.cpp:65
+msgid "Null Conduit for KPilot"
+msgstr "KPilot 的空管道"
+
+#: conduits/null/null-factory.cpp:67
+msgid "Configures the Null Conduit for KPilot"
+msgstr "配置 KPilot 的空管道"
+
+#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
+msgid "KMail"
+msgstr "KMail"
+
+#: conduits/popmail/popmail-conduit.cpp:118
+#, c-format
+msgid ""
+"_n: Sent one message\n"
+"Sent %n messages"
+msgstr "已发出 %n 封信"
+
+#: conduits/popmail/popmail-conduit.cpp:138
+msgid "No mail was sent."
+msgstr "未发出邮件。"
+
+#: conduits/popmail/popmail-conduit.cpp:145
+msgid "No mail could be sent."
+msgstr "无法发出邮件。"
+
+#: conduits/popmail/popmail-conduit.cpp:195
+msgid "Could not connect to DCOP server for the KMail connection."
+msgstr "无法为 KMail 连接 DCOP 服务器。"
+
+#: conduits/popmail/popmail-conduit.cpp:197
+#: conduits/popmail/popmail-conduit.cpp:232
+#: conduits/popmail/popmail-conduit.cpp:245
+#: conduits/popmail/popmail-conduit.cpp:273
+msgid "Error Sending Mail"
+msgstr "发送邮件时出错"
+
+#: conduits/popmail/popmail-conduit.cpp:230
+#: conduits/popmail/popmail-conduit.cpp:243
+msgid "Cannot open temporary file to store mail from Pilot in."
+msgstr "不能打开临时文件来保存从 Pilot 获取的邮件。"
+
+#: conduits/popmail/popmail-conduit.cpp:272
+msgid "DCOP connection with KMail failed."
+msgstr "和 KMail 的 DCOP 连接失败。"
+
+#: conduits/popmail/popmail-conduit.cpp:397
+msgid "Cannot perform backup of mail database"
+msgstr "无法执行邮件数据库备份"
+
+#: conduits/popmail/popmail-conduit.cpp:405
+msgid "Unable to open mail database on handheld"
+msgstr "无法打开手持设备上的邮件数据库"
+
+#: conduits/popmail/setupDialog.cpp:68
+msgid "Mail Conduit for KPilot"
+msgstr "KPilot 的 Mail 管道"
+
+#: conduits/popmail/setupDialog.cpp:70
+msgid "Configures the Mail Conduit for KPilot"
+msgstr "配置 KPilot 的 Mail 管道"
+
+#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
+#: conduits/vcalconduit/todo-setup.cpp:55
+#: conduits/vcalconduit/todo-setup.cpp:57
+#: conduits/vcalconduit/vcal-setup.cpp:58
+#: conduits/vcalconduit/vcal-setup.cpp:60
+#: conduits/vcalconduit/vcal-setup.cpp:62
+msgid "Original Author"
+msgstr "最初作者"
+
+#: conduits/popmail/setupDialog.cpp:80
+msgid "POP3 code"
+msgstr "POP3 代码"
+
+#: conduits/popmail/setupDialog.cpp:82
+msgid "SMTP support and redesign"
+msgstr "SMTP 支持和重新设计"
+
+#: conduits/recordconduit/factory.cpp:64
+#, fuzzy
+msgid "Record Conduit"
+msgstr "KPilot 的 Perl 管道"
+
+#: conduits/recordconduit/factory.cpp:66
+#, fuzzy
+msgid "Record Conduit for KPilot"
+msgstr "KPilot 的 Perl 管道"
+
+#: conduits/recordconduit/factory.cpp:68
+#, fuzzy
+msgid "Configures the Record Conduit for KPilot"
+msgstr "配置 KPilot 的 Perl 管道"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
+msgid "System Information"
+msgstr "系统信息"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
+msgid "Password set"
+msgstr "设置了密码"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
+msgid "No password set"
+msgstr "未设置密码"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
+msgid "No Cards available via pilot-link"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
+msgid "No debug data"
+msgstr "无调试数据"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
+msgid "Unable to open output file, using %1 instead."
+msgstr "无法打开输出文件，换用 %1。"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
+#, c-format
+msgid "Handheld system information written to the file %1"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
+msgid "HardwareInfo"
+msgstr "硬件信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
+msgid "UserInfo"
+msgstr "用户信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
+msgid "MemoryInfo"
+msgstr "内存信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
+msgid "StorageInfo"
+msgstr "存储信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
+msgid "DatabaseList"
+msgstr "数据库列表"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
+msgid "RecordNumbers"
+msgstr "记录数"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
+msgid "SyncInfo"
+msgstr "同步信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
+#, fuzzy
+msgid "KDEVersion"
+msgstr "TDE 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
+msgid "PalmOSVersion"
+msgstr "PalmOS 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
+msgid "DebugInformation"
+msgstr "调试信息"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
+msgid "KPilot System Information conduit"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
+msgid ""
+"Retrieves System, Hardware, and User Info from the Handheld and stores them "
+"to a file."
+msgstr ""
+
+#: conduits/timeconduit/time-conduit.cpp:57
+#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
+msgid "Time"
+msgstr "时间"
+
+#: conduits/timeconduit/time-conduit.cpp:91
+msgid "Setting the clock on the handheld"
+msgstr "设置手持设备上的时钟"
+
+#: conduits/timeconduit/time-conduit.cpp:108
+msgid ""
+"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
+"time conduit..."
+msgstr "PalmOS 3.25 和 3.3 不支持设置系统时间。正在跳过时间管道..."
+
+#: conduits/timeconduit/time-setup.cpp:48
+msgid "Time Synchronization Conduit for KPilot"
+msgstr "KPilot 的时间同步管道"
+
+#: conduits/timeconduit/time-setup.cpp:50
+msgid "Synchronizes the Time on the Handheld and the PC"
+msgstr "同步手持设备和 PC 的时间"
+
+#: conduits/vcalconduit/cleanupstate.cpp:62
+msgid "Cleaning up ..."
+msgstr "正在清理..."
+
+#: conduits/vcalconduit/cleanupstate.cpp:91
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the "
+"temporary local file \"%2\" manually."
+msgstr ""
+
+#: conduits/vcalconduit/initstate.cpp:59
+msgid "Initializing conduit ..."
+msgstr ""
+
+#: conduits/vcalconduit/pctohhstate.cpp:71
+msgid "Copying records to Pilot ..."
+msgstr "将记录复制到 Pilot..."
+
+#: conduits/vcalconduit/todo-conduit.cpp:183
+#: conduits/vcalconduit/todo-setup.cpp:45
+msgid "To-do"
+msgstr "待办"
+
+#: conduits/vcalconduit/todo-setup.cpp:47
+msgid "To-do Conduit for KPilot"
+msgstr "KPilot 的待办管道"
+
+#: conduits/vcalconduit/todo-setup.cpp:49
+msgid "Configures the To-do Conduit for KPilot"
+msgstr "配置 KPilot 的待办管道"
+
+#: conduits/vcalconduit/todo-setup.cpp:69
+msgid "To-do Destination"
+msgstr "待办目的"
+
+#: conduits/vcalconduit/vcal-conduit.cpp:178
+#: conduits/vcalconduit/vcal-setup.cpp:70
+msgid "Calendar"
+msgstr "日历"
+
+#: conduits/vcalconduit/vcal-conduit.cpp:222
+msgid ""
+"Event \"%1\" has a yearly recurrence other than by month, will change this "
+"to recurrence by month on handheld."
+msgstr "事件“%1”是每年重现，而不是每月重现。将在手持设备上改变它为每月重现。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:183
+msgid "Could not open the calendar databases."
+msgstr "无法打开日历数据库。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:269
+msgid ""
+"You selected to sync with an iCalendar file, but did not give a filename. "
+"Please select a valid file name in the conduit's configuration dialog"
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:356
+#, c-format
+msgid "Using local time zone: %1"
+msgstr "使用本地时区：%1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:292
+#: conduits/vcalconduit/vcal-conduitbase.cpp:357
+#, c-format
+msgid "Using non-local time zone: %1"
+msgstr "使用非本地时区：%1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:321
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened or created. "
+"Please make sure to supply a valid file name in the conduit's configuration "
+"dialog. Aborting the conduit."
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:330
+msgid "Syncing with file \"%1\""
+msgstr "正在和文件“%1”同步"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:354
+msgid "Syncing with standard calendar resource."
+msgstr "与标准日历资源同步。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:367
+msgid ""
+"Unable to initialize the calendar object. Please check the conduit's setup"
+msgstr "无法初始化日历对象。请检查管道设置"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:425
+msgid ""
+"The following item was modified both on the Handheld and on your PC:\n"
+"PC entry:\n"
+"\t"
+msgstr ""
+"下列项目在您的 PC 和手持设备上都被修改了：\n"
+"PC 上的项目为：\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:428
+msgid ""
+"\n"
+"Handheld entry:\n"
+"\t"
+msgstr ""
+"\n"
+"手持设备项：\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:430
+msgid ""
+"\n"
+"\n"
+"Which entry do you want to keep? It will overwrite the other entry."
+msgstr ""
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:435
+msgid "Conflicting Entries"
+msgstr "冲突项"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
+msgid "PC"
+msgstr "PC"
+
+#: conduits/vcalconduit/vcal-setup.cpp:44
+msgid "VCal Conduit for KPilot"
+msgstr "KPilot 的 VCal 管道"
+
+#: conduits/vcalconduit/vcal-setup.cpp:46
+msgid "Configures the VCal Conduit for KPilot"
+msgstr "配置 KPilot 的 VCal 管道"
+
+#: conduits/vcalconduit/vcal-setup.cpp:64
+msgid "iCalendar port"
+msgstr "iCalendar 端口"
+
+#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
+#: kpilot/kpilot.cpp:1039
+msgid "Bugfixer"
+msgstr "错误修正器"
+
+#: conduits/vcalconduit/vcal-setup.cpp:69
+msgid "Calendar Destination"
+msgstr "日历目的"
+
+#: kpilot/addressEditor.cpp:59
+msgid "Address Editor"
+msgstr "地址编辑器"
+
+#: kpilot/addressEditor.cpp:107
+msgid "Phone"
+msgstr "电话"
+
+#: kpilot/addressEditor.cpp:180
+msgid "Last name:"
+msgstr "姓："
+
+#: kpilot/addressEditor.cpp:181
+msgid "First name:"
+msgstr "名："
+
+#: kpilot/addressEditor.cpp:182
+msgid "Title:"
+msgstr "头衔："
+
+#: kpilot/addressEditor.cpp:183
+msgid "Company:"
+msgstr "公司："
+
+#: kpilot/addressEditor.cpp:192
+msgid "Address:"
+msgstr "地址："
+
+#: kpilot/addressEditor.cpp:193
+msgid "City:"
+msgstr "城市："
+
+#: kpilot/addressEditor.cpp:194
+msgid "State:"
+msgstr "省："
+
+#: kpilot/addressEditor.cpp:195
+msgid "Zip code:"
+msgstr "邮政编码："
+
+#: kpilot/addressEditor.cpp:196
+msgid "Country:"
+msgstr "国家："
+
+#: kpilot/addressEditor.cpp:197
+msgid "Custom 1:"
+msgstr "定制 1："
+
+#: kpilot/addressEditor.cpp:198
+msgid "Custom 2:"
+msgstr "定制 2："
+
+#: kpilot/addressEditor.cpp:199
+msgid "Custom 3:"
+msgstr "定制 3："
+
+#: kpilot/addressEditor.cpp:200
+msgid "Custom 4:"
+msgstr "定制 4："
+
+#: kpilot/addressWidget.cpp:187
+msgid "There are still %1 address editing windows open."
+msgstr "仍有 %1 个地址编辑窗口打开着。"
+
+#: kpilot/addressWidget.cpp:191
+#, c-format
+msgid ""
+"_n: There is still an address editing window open.\n"
+"There are still %n address editing windows open."
+msgstr "仍有 %n 个地址编辑窗口打开着。"
+
+#: kpilot/addressWidget.cpp:224
+msgid "<qt>Select the category of addresses to display here.</qt>"
+msgstr "<qt>选择要在这里显示的地址类别。</qt>"
+
+#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
+#: kpilot/todoWidget.cpp:220
+msgid "Category:"
+msgstr "类别："
+
+#: kpilot/addressWidget.cpp:237
+msgid ""
+"<qt>This list displays all the addresses in the selected category. Click on "
+"one to display it to the right.</qt>"
+msgstr "<qt>该列表显示了所选类别中的所有地址。点击其中一个在右边显示它。</qt>"
+
+#: kpilot/addressWidget.cpp:241
+msgid "Address info:"
+msgstr "地址信息："
+
+#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
+msgid "Edit Record..."
+msgstr "编辑记录..."
+
+#: kpilot/addressWidget.cpp:255
+msgid "<qt>You can edit an address when it is selected.</qt>"
+msgstr "<qt>当某地址被选中时，您可以编辑它。</qt>"
+
+#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
+msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
+msgid "New Record..."
+msgstr "新记录..."
+
+#: kpilot/addressWidget.cpp:263
+msgid "<qt>Add a new address to the address book.</qt>"
+msgstr "<qt>在地址簿中添加一个新地址。</qt>"
+
+#: kpilot/addressWidget.cpp:264
+msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
+msgid "Delete Record"
+msgstr "删除记录"
+
+#: kpilot/addressWidget.cpp:274
+msgid "<qt>Delete the selected address from the address book.</qt>"
+msgstr "<qt>从地址簿中删除选中的地址。</qt>"
+
+#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
+#: kpilot/todoWidget.cpp:281
+msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/addressWidget.cpp:277
+msgid ""
+"_: Export addresses to file\n"
+"Export..."
+msgstr ""
+
+#: kpilot/addressWidget.cpp:281
+#, fuzzy
+msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
+msgstr "<qt>该列表显示了所选类别中的所有地址。点击其中一个在右边显示它。</qt>"
+
+#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
+msgid "[unknown]"
+msgstr "[未知]"
+
+#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
+msgid "Cannot edit new records until HotSynced with Pilot."
+msgstr "在与 Pilot 热同步之前不能编辑新记录。"
+
+#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
+#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
+msgid "HotSync Required"
+msgstr "需要热同步"
+
+#: kpilot/addressWidget.cpp:480
+#, fuzzy
+msgid ""
+"You cannot add addresses to the address book until you have done a HotSync "
+"at least once to retrieve the database layout from your Pilot."
+msgstr ""
+"在您至少执行了一次热同步，并从您的 Pilot 中检索到数据库布局之前，您不能在地址"
+"簿中添加地址。"
+
+#: kpilot/addressWidget.cpp:483
+#, fuzzy
+msgid "Cannot Add New Address"
+msgstr "不能添加新地址"
+
+#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
+msgid "New records cannot be deleted until HotSynced with pilot."
+msgstr "在与 Pilot 热同步之前不能删除新记录。"
+
+#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
+msgid "Delete currently selected record?"
+msgstr "删除当前选定的记录？"
+
+#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
+msgid "Delete Record?"
+msgstr "删除记录？"
+
+#: kpilot/addressWidget.cpp:677
+msgid "Export All Addresses"
+msgstr ""
+
+#: kpilot/addressWidget.cpp:678
+#, c-format
+msgid "Export Address Category %1"
+msgstr ""
+
+#: kpilot/addressWidget.cpp:696
+#, fuzzy
+msgid "The file <i>%1</i> exists. Overwrite?"
+msgstr "文件已存在。你想覆盖它吗？"
+
+#: kpilot/addressWidget.cpp:697
+#, fuzzy
+msgid "Overwrite File?"
+msgstr "覆盖(&O)"
+
+#: kpilot/addressWidget.cpp:710
+#, fuzzy
+msgid "The file <i>%1</i> could not be opened for writing."
+msgstr "无法打开数据库进行写入"
+
+#: kpilot/conduitConfigDialog.cpp:252
+msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:260
+msgid "<qt>This is an old-style conduit.</qt>"
+msgstr "<qt>这是旧风格的管道。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:264
+msgid "Configure..."
+msgstr "配置..."
+
+#: kpilot/conduitConfigDialog.cpp:274
+msgid ""
+"<qt><i>Conduits</i> are external (possibly third-party) programs that "
+"perform synchronization actions. They may have individual configurations. "
+"Select a conduit to configure it, and enable it by clicking on its checkbox. "
+"</qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:282
+msgid ""
+"<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
+"your hardware and the way KPilot should display your data. For the basic "
+"setup, which should fulfill the need of most users, just use the setup "
+"wizard below.</p>If you need some special settings, this dialog provides all "
+"the options for fine-tuning KPilot. But be warned: The HotSync settings are "
+"various esoteric things.</p><p>You can enable an action or conduit by "
+"clicking on its checkbox. Checked conduits will be run during a HotSync. "
+"Select a conduit to configure it.</p></qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:295
+msgid "Configuration Wizard"
+msgstr "配置向导"
+
+#: kpilot/conduitConfigDialog.cpp:369
+msgid "About KPilot. Credits."
+msgstr "关于 KPilot。致谢。"
+
+#: kpilot/conduitConfigDialog.cpp:372
+msgid "Conduits"
+msgstr "管道"
+
+#: kpilot/conduitConfigDialog.cpp:374
+msgid "General Setup"
+msgstr "常规设置"
+
+#: kpilot/conduitConfigDialog.cpp:382
+msgid "General setup of KPilot (User name, port, general sync settings)"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:384
+msgid "Actions for HotSync with individual configuration."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
+msgid "Startup and Exit"
+msgstr "启动和退出"
+
+#: kpilot/conduitConfigDialog.cpp:395
+msgid "Behavior at startup and exit."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
+#: kpilot/kpilotConfigDialog_viewers.ui:33
+#, no-c-format
+msgid "Viewers"
+msgstr "查看器"
+
+#: kpilot/conduitConfigDialog.cpp:396
+msgid "Viewer settings."
+msgstr "查看器设置。"
+
+#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
+#: lib/syncAction.cpp:208
+msgid "Backup"
+msgstr "备份"
+
+#: kpilot/conduitConfigDialog.cpp:397
+msgid "Special settings for backup."
+msgstr "备份的特殊设置。"
+
+#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261
+#: kpilot/kpilot.cpp:263 kpilot/kpilot.cpp:515
+#: kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
+msgid "HotSync"
+msgstr "热同步"
+
+#: kpilot/conduitConfigDialog.cpp:398
+msgid "Special behavior during HotSync."
+msgstr "热同步时的特殊行为。"
+
+#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
+msgid "Device"
+msgstr "设备"
+
+#: kpilot/conduitConfigDialog.cpp:399
+msgid "Hardware settings and startup and exit options."
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:542
+msgid ""
+"<qt>This is an internal action which has no configuration options. The "
+"action's description is: <i>%1</i> </qt>"
+msgstr ""
+
+#: kpilot/conduitConfigDialog.cpp:722
+msgid "KPilot Setup"
+msgstr "KPilot 设置"
+
+#: kpilot/conduitConfigDialog.cpp:735
+msgid ""
+"<qt>No library could be found for the conduit %1. This means that the "
+"conduit was not installed properly.</qt>"
+msgstr "<qt>找不到管道 %1 所用的库。这意味着该管道没有被正确安装。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
+msgid "Conduit Error"
+msgstr "管道错误"
+
+#: kpilot/conduitConfigDialog.cpp:752
+msgid ""
+"<qt>There was a problem loading the library for the conduit %1. This means "
+"that the conduit was not installed properly.</qt>"
+msgstr ""
+"<qt>载入管道 %1 所用的库时出现问题。这意味着该管道没有被正确安装。</qt>"
+
+#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
+msgid "&Add..."
+msgstr "添加(&A)..."
+
+#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
+msgid "&Edit..."
+msgstr "编辑(&E)..."
+
+#: kpilot/datebookWidget.cpp:64
+msgid "&Delete..."
+msgstr "删除(&D)..."
+
+#: kpilot/datebookWidget.cpp:69
+msgid "Al"
+msgstr "Al"
+
+#: kpilot/datebookWidget.cpp:70
+msgid "Rec"
+msgstr ""
+
+#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
+msgid "Description"
+msgstr "描述"
+
+#: kpilot/dbAppInfoEditor.cpp:46
+msgid "Edit AppInfo Block"
+msgstr ""
+
+#: kpilot/dbAppInfoEditor.cpp:68
+msgid ""
+"To view the Application info block data, please install a hex editor (e.g. "
+"khexedit from tdeutils)."
+msgstr ""
+
+#: kpilot/dbAppInfoEditor.cpp:86
+msgid "Changing the AppInfo block isn't yet supported by KPilot!"
+msgstr ""
+
+#: kpilot/dbFlagsEditor.cpp:45
+msgid "Edit Database Flags"
+msgstr "编辑数据库标志"
+
+#: kpilot/dbFlagsEditor.cpp:60
+msgid ""
+"Changing the database flags might corrupt the whole database, or make the "
+"data unusable. Do not change the values unless you are absolutely sure you "
+"know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+
+#: kpilot/dbFlagsEditor.cpp:60
+msgid "Changing Database Flags"
+msgstr "更改数据库标志"
+
+#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
+#, fuzzy
+msgid "Assign"
+msgstr "助手"
+
+#: kpilot/dbRecordEditor.cpp:53
+msgid "Edit Record"
+msgstr "编辑记录"
+
+#: kpilot/dbRecordEditor.cpp:75
+msgid ""
+"Changing the record data and flags might corrupt the whole record, or even "
+"make the database unusable. Do not change the values unless you are "
+"absolutely sure you know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+
+#: kpilot/dbRecordEditor.cpp:75
+msgid "Changing Record"
+msgstr "更改记录"
+
+#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
+#, no-c-format
+msgid "Record index:"
+msgstr "记录索引："
+
+#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
+#, no-c-format
+msgid "Record ID:"
+msgstr "记录 ID："
+
+#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
+#: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
+#: kpilot/todoEditor_base.ui:99
+#, no-c-format
+msgid "1"
+msgstr "1"
+
+#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
+#, no-c-format
+msgid "Flags"
+msgstr ""
+
+#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
+#, no-c-format
+msgid "&Dirty"
+msgstr "脏(&D)"
+
+#: kpilot/dbRecordEditor.cpp:112
+msgid "De&leted"
+msgstr "已删除(&L)"
+
+#: kpilot/dbRecordEditor.cpp:113
+msgid "&Busy"
+msgstr "忙(&B)"
+
+#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
+#, no-c-format
+msgid "&Secret"
+msgstr "机密(&S)"
+
+#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
+#, no-c-format
+msgid "&Archived"
+msgstr "存档(&A)"
+
+#: kpilot/dbRecordEditor.cpp:193
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. "
+"kbytesedit from tdeutils)."
+msgstr ""
+"要查看并编辑记录数据，请安装十六进制编辑器(如 tdeutils 中的 kbytesedit)。"
+
+#: kpilot/dbSelectionDialog.cpp:108
+msgid ""
+"This is a database that exists on the device. It was not added manually, so "
+"it can not removed from the list."
+msgstr ""
+
+#: kpilot/dbSelectionDialog.cpp:108
+msgid "Database on Device"
+msgstr "设备上的数据库"
+
+#: kpilot/dbSelectionDialog.cpp:119
+msgid "You need to select a database to delete in the list."
+msgstr ""
+
+#: kpilot/dbSelectionDialog.cpp:119
+msgid "No Database Selected"
+msgstr "未选中数据库"
+
+#: kpilot/dbviewerWidget.cpp:84
+msgid "All Databases"
+msgstr "全部数据库"
+
+#: kpilot/dbviewerWidget.cpp:85
+msgid "Only Applications (*.prc)"
+msgstr "只有应用程序(*.prc)"
+
+#: kpilot/dbviewerWidget.cpp:86
+msgid "Only Databases (*.pdb)"
+msgstr "只有数据库(*.pdb)"
+
+#: kpilot/dbviewerWidget.cpp:93
+msgid "General Database &Information"
+msgstr "常规数据库信息(&I)"
+
+#: kpilot/dbviewerWidget.cpp:95
+msgid "&Application Info Block (Categories etc.)"
+msgstr "应用程序信息块(类别等)(&A)"
+
+#: kpilot/dbviewerWidget.cpp:101
+msgid "Rec. Nr."
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:102
+msgid "Length"
+msgstr "长度"
+
+#: kpilot/dbviewerWidget.cpp:103
+msgid "Record ID"
+msgstr "记录 ID"
+
+#: kpilot/dbviewerWidget.cpp:189
+#, c-format
+msgid "<B>Warning:</B> Cannot read database file %1."
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:194
+msgid "<B>Database:</B> %1, %2 records<BR>"
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:203
+msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
+#, c-format
+msgid "<B>Warning:</B> Cannot read application file %1."
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:260
+msgid "<B>Application:</B> %1<BR><BR>"
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:267
+msgid "Created: %1<BR>"
+msgstr "创建于：%1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:270
+msgid "Modified: %1<BR>"
+msgstr "修改于：%1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:273
+msgid "Backed up: %1<BR>"
+msgstr "备份于： %1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:353
+msgid "You must select a record for editing."
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:353
+msgid "No Record Selected"
+msgstr "未选中记录"
+
+#: kpilot/dbviewerWidget.cpp:366
+msgid ""
+"<qt>Do you really want to delete the selected record? This cannot be undone."
+"<br><br>Delete record?<qt>"
+msgstr ""
+
+#: kpilot/dbviewerWidget.cpp:366
+msgid "Deleting Record"
+msgstr "删除记录"
+
+#: kpilot/fileInstallWidget.cpp:71
+msgid "Files to install:"
+msgstr "要安装的文件："
+
+#: kpilot/fileInstallWidget.cpp:77
+msgid "Add File..."
+msgstr "添加文件..."
+
+#: kpilot/fileInstallWidget.cpp:81
+msgid "<qt>Choose a file to add to the list of files to install.</qt>"
+msgstr "<qt>选择一个文件来添加到要安装的文件列表中。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:83
+msgid "Clear List"
+msgstr "清除列表"
+
+#: kpilot/fileInstallWidget.cpp:87
+msgid ""
+"<qt>Clear the list of files to install. No files will be installed.</qt>"
+msgstr "<qt>清除要安装的文件列表。将不会安装任何文件。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:95
+msgid ""
+"<qt>This lists files that will be installed on the Pilot during the next "
+"HotSync. Drag files here or use the Add button.</qt>"
+msgstr ""
+"<qt>这里列出下次热同步时所要安装到 Pilot 的文件。把文件拖到这里，或者使用添加"
+"按钮。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:217
+msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
+msgstr "*.pdb *.prc|PalmOS 数据库(*.pdb *.prc)"
+
+#: kpilot/fileInstallWidget.cpp:291
+msgid ""
+"_: Delete a single file item\n"
+"Delete"
+msgstr ""
+
+#: kpilot/fileInstallWidget.cpp:294
+#, fuzzy
+msgid "Delete selected files"
+msgstr "删除选中的备忘录。"
+
+#: kpilot/fileInstaller.cpp:109
+#, fuzzy, c-format
+msgid "Cannot install %1"
+msgstr "无法安装文件 &quot;%1&quot;！"
+
+#: kpilot/fileInstaller.cpp:110
+msgid ""
+"Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
+"file installer."
+msgstr ""
+
+#: kpilot/hotSync.cpp:339
+#, c-format
+msgid "Backup directory: %1."
+msgstr "备份目录：%1。"
+
+#: kpilot/hotSync.cpp:353
+msgid "Full backup started."
+msgstr "完全备份已开始。"
+
+#: kpilot/hotSync.cpp:358
+msgid "Fast backup started"
+msgstr "快速备份已开始"
+
+#: kpilot/hotSync.cpp:387
+msgid "Exiting on cancel."
+msgstr "在取消时退出。"
+
+#: kpilot/hotSync.cpp:399
+msgid "Full backup complete."
+msgstr "完全备份完成。"
+
+#: kpilot/hotSync.cpp:403
+msgid "Fast backup complete."
+msgstr "完全备份完成。"
+
+#: kpilot/hotSync.cpp:419
+#, c-format
+msgid "Backing up: %1"
+msgstr "正在备份： %1"
+
+#: kpilot/hotSync.cpp:447
+#, c-format
+msgid "Skipping %1"
+msgstr "跳过 %1"
+
+#: kpilot/hotSync.cpp:482
+msgid "Backup of %1 failed.\n"
+msgstr "备份 %1 失败。\n"
+
+#: kpilot/hotSync.cpp:540
+#, fuzzy
+msgid "... OK.\n"
+msgstr ".. 完毕\n"
+
+#: kpilot/hotSync.cpp:548
+#, fuzzy
+msgid "Backup failed."
+msgstr "备份 %1 失败。\n"
+
+#: kpilot/hotSync.cpp:607
+msgid "[File Installer]"
+msgstr "[文件安装器]"
+
+#: kpilot/hotSync.cpp:612
+msgid "No Files to install"
+msgstr "没有要安装的文件"
+
+#: kpilot/hotSync.cpp:624
+#, c-format
+msgid ""
+"_n: Installing one file\n"
+"Installing %n Files"
+msgstr "安装 %n 个文件"
+
+#: kpilot/hotSync.cpp:649
+msgid "Done Installing Files"
+msgstr "文件安装完毕"
+
+#: kpilot/hotSync.cpp:663
+#, c-format
+msgid "Installing %1"
+msgstr "正在安装 %1"
+
+#: kpilot/hotSync.cpp:686
+msgid "Cannot install file &quot;%1&quot;."
+msgstr "无法安装文件“%1”。"
+
+#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
+msgid "Unable to open file &quot;%1&quot;."
+msgstr "无法打开文件“%1”。"
+
+#: kpilot/hotSync.cpp:732
+msgid "Unable to read file &quot;%1&quot;."
+msgstr "无法读取文件“%1”。"
+
+#: kpilot/hotSync.cpp:748
+msgid ""
+"The database in &quot;%1&quot; has a resource name that is longer than 31 "
+"characters. This suggests a bug in the tool used to create the database. "
+"KPilot cannot install this database."
+msgstr ""
+
+#: kpilot/hotSync.cpp:806
+msgid ""
+"_: A common name\n"
+"John Doe"
+msgstr "张三"
+
+#: kpilot/hotSync.cpp:808
+#, fuzzy
+msgid ""
+"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
+"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
+msgstr ""
+"<qt>KPilot 以及 Pilot 都没有设置用户名。用户名<i>应该</i>被设置。KPilot 应该"
+"将它们设置成默认值(<i>%1</i>)吗？</qt>"
+
+#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
+msgid "User Unknown"
+msgstr "未知用户"
+
+#: kpilot/hotSync.cpp:826
+#, fuzzy
+msgid ""
+"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
+"KPilot use this username in future?</qt>"
+msgstr ""
+"<qt>Pilot 已经有一个用户名设置(<i>%1<i>)，但是 KPilot 并没有。KPilot 今后要使"
+"用该用户名吗？"
+
+#: kpilot/hotSync.cpp:844
+#, fuzzy
+msgid ""
+"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
+"KPilot's username be set in the handheld as well?"
+msgstr ""
+"<qt>KPilot 已经有一个用户名被设置(<i>%1<i>)，但是 Pilot 并没有。应该将 "
+"KPilot 的用户名也设置到 Pilot 的吗？"
+
+#: kpilot/hotSync.cpp:848
+msgid ""
+"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
+"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
+"stop this sync.)"
+msgstr ""
+
+#: kpilot/hotSync.cpp:877
+#, fuzzy
+msgid ""
+"<qt>The handheld thinks that the username is %1; however, KPilot says you "
+"are %2.Which of these is the correct name?\n"
+"If you click on Cancel, the sync will proceed, but the usernames will not be "
+"changed.</qt>"
+msgstr ""
+"<qt>Pilot 认为您的用户名是 %1，而 KPilot 却认为您是 %2。应该认为 Pilot 是正确"
+"的，并将 KPilot 的用户名设置为 %1 吗？"
+
+#: kpilot/hotSync.cpp:887
+msgid "User Mismatch"
+msgstr "用户不匹配"
+
+#: kpilot/hotSync.cpp:890
+msgid "Use KPilot Name"
+msgstr "使用 KPilot 名称"
+
+#: kpilot/hotSync.cpp:891
+msgid "Use Handheld Name"
+msgstr "使用手持设备名称"
+
+#: kpilot/hotSync.cpp:997
+msgid "Restore directory does not exist."
+msgstr "恢复目录不存在。"
+
+#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
+msgid "Restore not performed."
+msgstr "恢复没有被执行。"
+
+#: kpilot/hotSync.cpp:1003
+msgid ""
+"<qt>Are you sure you want to completely restore your Pilot from the backup "
+"directory (<i>%1</i>)? This will erase any information you currently have on "
+"your Pilot.</qt>"
+msgstr ""
+"<qt>您确定要从备份目录(<i>%1</i>)中完全恢复 Pilot 吗？这将会抹去您目前在 "
+"Pilot 上的所有的信息。</qt>"
+
+#: kpilot/hotSync.cpp:1008
+msgid "Restore Pilot"
+msgstr "恢复 Pilot"
+
+#: kpilot/hotSync.cpp:1010
+msgid "Restore <i>not</i> performed."
+msgstr "恢复<i>没有</i>被执行。"
+
+#: kpilot/hotSync.cpp:1012
+msgid "Canceled by user."
+msgstr "已被用户取消。"
+
+#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
+msgid "Restoring %1..."
+msgstr "正在恢复 %1..."
+
+#: kpilot/hotSync.cpp:1044
+msgid "File '%1' cannot be read."
+msgstr "无法读取文件“%1”。"
+
+#: kpilot/hotSync.cpp:1071
+msgid "OK."
+msgstr "完毕。"
+
+#: kpilot/hotSync.cpp:1085
+msgid "Restore incomplete."
+msgstr "恢复未完成。"
+
+#: kpilot/hotSync.cpp:1100
+msgid "Cannot restore file `%1'."
+msgstr "无法恢复文件“%1”。"
+
+#: kpilot/internalEditorAction.cpp:62
+msgid "[Internal Editors]"
+msgstr "[内部编辑器]"
+
+#: kpilot/internalEditorAction.cpp:76
+#, c-format
+msgid "Databases with changed records: %1"
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:101
+#, fuzzy
+msgid "Unable to open the serial or local database for %1. Skipping it."
+msgstr "无法打开 palm doc 数据库 %1"
+
+#: kpilot/internalEditorAction.cpp:156
+msgid "record"
+msgstr "记录"
+
+#: kpilot/internalEditorAction.cpp:166
+msgid "address"
+msgstr "地址"
+
+#: kpilot/internalEditorAction.cpp:177
+msgid "to-do entry"
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:186
+msgid "memo"
+msgstr "备忘录"
+
+#: kpilot/internalEditorAction.cpp:197
+msgid "calendar entry"
+msgstr "日历项"
+
+#: kpilot/internalEditorAction.cpp:204
+msgid ""
+"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
+"the internal editor. Shall the changes in KPilot be copied to the handheld, "
+"and so override the changes there?"
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:209
+#, fuzzy, c-format
+msgid "Conflict in database  %1"
+msgstr "正在同步数据库 %1..."
+
+#: kpilot/internalEditorAction.cpp:211
+msgid "Use KPilot"
+msgstr "使用 KPilot"
+
+#: kpilot/internalEditorAction.cpp:211
+msgid "Use Handheld"
+msgstr "使用手持设备"
+
+#: kpilot/internalEditorAction.cpp:212
+msgid "Use &KPilot"
+msgstr "使用 KPilot(&K)"
+
+#: kpilot/internalEditorAction.cpp:213
+msgid "Use &Handheld"
+msgstr "使用手持设备(&H)"
+
+#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
+msgid "Entry in KPilot"
+msgstr "KPilot 中的项"
+
+#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
+msgid "Entry on Handheld"
+msgstr "手持设备中的项"
+
+#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. khexedit "
+"from tdeutils)."
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:315
+#, c-format
+msgid "Databases with changed flags: %1"
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:333
+msgid "Setting the database flags on the handheld is not yet supported."
+msgstr ""
+
+#: kpilot/internalEditorAction.cpp:356
+#, c-format
+msgid "Databases with changed AppBlock: %1"
+msgstr ""
+
+#: kpilot/kpilot.cpp:162
+msgid "Starting the KPilot daemon ..."
+msgstr "正在启动 KPilot 守护程序..."
+
+#: kpilot/kpilot.cpp:179
+msgid ""
+"Could not start the KPilot daemon. The system error message was: &quot;"
+"%1&quot;"
+msgstr ""
+
+#: kpilot/kpilot.cpp:196
+msgid "Daemon status is `%1'"
+msgstr "守护程序状态为“%1”"
+
+#: kpilot/kpilot.cpp:197
+msgid "not running"
+msgstr "未运行"
+
+#: kpilot/kpilot.cpp:214
+msgid "Using character set %1 on the handheld."
+msgstr "手持设备上使用字符集 %1。"
+
+#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
+msgid "To-do Viewer"
+msgstr "待办查看器"
+
+#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
+#: kpilot/kpilotConfigDialog_viewers.ui:74
+#, no-c-format
+msgid "Address Viewer"
+msgstr "地址查看器"
+
+#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
+msgid "Memo Viewer"
+msgstr "备忘录查看器"
+
+#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
+msgid "File Installer"
+msgstr "文件安装器"
+
+#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
+msgid "Generic DB Viewer"
+msgstr ""
+
+#: kpilot/kpilot.cpp:360
+#, fuzzy
+msgid "Next sync will be a backup. "
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
+#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
+#: kpilot/pilotDaemon.cpp:671
+msgid "Please press the HotSync button."
+msgstr "请按“热同步”按钮。"
+
+#: kpilot/kpilot.cpp:368
+#, fuzzy
+msgid "Next sync will restore the Pilot from backup. "
+msgstr "从备份中恢复 Pilot"
+
+#: kpilot/kpilot.cpp:376
+msgid "Next sync will be a regular HotSync. "
+msgstr ""
+
+#: kpilot/kpilot.cpp:384
+#, fuzzy
+msgid "Next sync will be a Full Sync. "
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:392
+#, fuzzy
+msgid "Next sync will copy Handheld data to PC. "
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:400
+#, fuzzy
+msgid "Next sync will copy PC data to Handheld. "
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:428
+#, fuzzy
+msgid "The daemon has exited."
+msgstr "退出时停止守护进程(&T)"
+
+#: kpilot/kpilot.cpp:429
+#, fuzzy
+msgid "No further HotSyncs are possible."
+msgstr "尽可能做快速同步(&F)"
+
+#: kpilot/kpilot.cpp:430
+msgid "Restart the daemon to HotSync again."
+msgstr ""
+
+#: kpilot/kpilot.cpp:450
+#, fuzzy, c-format
+msgid "Cannot start a Sync now. %1"
+msgstr "现在不能开始同步。%1"
+
+#: kpilot/kpilot.cpp:463
+#, fuzzy
+msgid "Cannot start Sync"
+msgstr "不能开始同步"
+
+#: kpilot/kpilot.cpp:517
+msgid "Select the kind of HotSync to perform next."
+msgstr ""
+
+#: kpilot/kpilot.cpp:518
+msgid ""
+"Select the kind of HotSync to perform next. This applies only to the next "
+"HotSync; to change the default, use the configuration dialog."
+msgstr ""
+
+#: kpilot/kpilot.cpp:525
+msgid "&HotSync"
+msgstr "热同步(&H)"
+
+#: kpilot/kpilot.cpp:528
+#, fuzzy
+msgid "Next HotSync will be normal HotSync."
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:529
+msgid "Tell the daemon that the next HotSync should be a normal HotSync."
+msgstr ""
+
+#: kpilot/kpilot.cpp:533
+#, fuzzy
+msgid "Full&Sync"
+msgstr "同步"
+
+#: kpilot/kpilot.cpp:536
+#, fuzzy
+msgid "Next HotSync will be a FullSync."
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:537
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should be a FullSync (check data on "
+"both sides)."
+msgstr "PC 同步到手持设备并且手持设备同步到 PC"
+
+#: kpilot/kpilot.cpp:541
+msgid "&Backup"
+msgstr "备份(&B)"
+
+#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
+#, fuzzy
+msgid "Next HotSync will be backup."
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:545
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should back up the Handheld to the PC."
+msgstr "PC 同步到手持设备并且手持设备同步到 PC"
+
+#: kpilot/kpilot.cpp:549
+msgid "&Restore"
+msgstr "恢复(&R)"
+
+#: kpilot/kpilot.cpp:552
+#, fuzzy
+msgid "Next HotSync will be restore."
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:553
+msgid ""
+"Tell the daemon that the next HotSync should restore the Handheld from data "
+"on the PC."
+msgstr ""
+
+#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
+#: lib/syncAction.cpp:207
+#, no-c-format
+msgid "Copy Handheld to PC"
+msgstr "将手持设备复制到 PC"
+
+#: kpilot/kpilot.cpp:561
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the Handheld "
+"to the PC, overwriting entries on the PC."
+msgstr "PC 同步到手持设备并且手持设备同步到 PC"
+
+#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
+#: lib/syncAction.cpp:206
+#, no-c-format
+msgid "Copy PC to Handheld"
+msgstr "将 PC 复制到手持设备"
+
+#: kpilot/kpilot.cpp:569
+#, fuzzy
+msgid "Next HotSync will copy PC to Handheld."
+msgstr "PC 同步到手持设备"
+
+#: kpilot/kpilot.cpp:570
+#, fuzzy
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the PC to "
+"the Handheld, overwriting entries on the Handheld."
+msgstr "PC 同步到手持设备并且手持设备同步到 PC"
+
+#: kpilot/kpilot.cpp:577
+msgid "&List Only"
+msgstr ""
+
+#: kpilot/kpilot.cpp:580
+#, fuzzy
+msgid "Next HotSync will list databases."
+msgstr "只进行备份"
+
+#: kpilot/kpilot.cpp:581
+msgid ""
+"Tell the daemon that the next HotSync should just list the files on the "
+"Handheld and do nothing else."
+msgstr ""
+
+#: kpilot/kpilot.cpp:588
+#, fuzzy
+msgid "Rese&t Link"
+msgstr "重置"
+
+#: kpilot/kpilot.cpp:591
+msgid "Reset the device connection."
+msgstr ""
+
+#: kpilot/kpilot.cpp:592
+msgid "Try to reset the daemon and its connection to the Handheld."
+msgstr ""
+
+#: kpilot/kpilot.cpp:597
+msgid "Quit KPilot, (and stop the daemon if configured that way)."
+msgstr ""
+
+#: kpilot/kpilot.cpp:613
+#, fuzzy
+msgid "Configuration &Wizard..."
+msgstr "管道配置对话框"
+
+#: kpilot/kpilot.cpp:616
+#, fuzzy
+msgid "Configure KPilot using the configuration wizard."
+msgstr "该 JPilot 插件没有配置对话框"
+
+#: kpilot/kpilot.cpp:851
+msgid ""
+"The library containing the configuration wizard for KPilot could not be "
+"loaded, and the wizard is not available. Please try to use the regular "
+"configuration dialog."
+msgstr ""
+
+#: kpilot/kpilot.cpp:854
+#, fuzzy
+msgid "Wizard Not Available"
+msgstr "可用"
+
+#: kpilot/kpilot.cpp:898
+msgid "Changed username to `%1'."
+msgstr ""
+
+#: kpilot/kpilot.cpp:927
+msgid ""
+"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
+"busy)."
+msgstr ""
+
+#: kpilot/kpilot.cpp:951
+#, fuzzy
+msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
+msgstr "不能打开 Pilot 端口“%1”。"
+
+#: kpilot/kpilot.cpp:991
+#, fuzzy
+msgid "Setup the Pilot device, conduits and other parameters"
+msgstr "设置 Pilot 设备和其它参数"
+
+#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
+msgid "Set debugging level"
+msgstr "设置调试级别"
+
+#: kpilot/kpilot.cpp:1015
+msgid "KPilot"
+msgstr "KPilot"
+
+#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
+msgid "Project Leader"
+msgstr "项目负责人"
+
+#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
+#, fuzzy
+msgid "Core and conduits developer"
+msgstr "管道错误"
+
+#: kpilot/kpilot.cpp:1034
+msgid "VCal conduit"
+msgstr "VCal 管道"
+
+#: kpilot/kpilot.cpp:1035
+msgid "Abbrowser conduit"
+msgstr "Abbrowser 管道"
+
+#: kpilot/kpilot.cpp:1036
+msgid "Expenses conduit"
+msgstr "Expenses 管道"
+
+#: kpilot/kpilot.cpp:1037
+#, fuzzy
+msgid "Notepad conduit, Bugfixer"
+msgstr "[KNotes 管道："
+
+#: kpilot/kpilot.cpp:1041
+msgid "XML GUI"
+msgstr "XML GUI"
+
+#: kpilot/kpilot.cpp:1044
+msgid ".ui files"
+msgstr ".ui 文件"
+
+#: kpilot/kpilot.cpp:1046
+msgid "Bugfixer, coolness"
+msgstr "错误修正器，酷"
+
+#: kpilot/kpilot.cpp:1048
+msgid "VCalconduit state machine, CMake"
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:163
+msgid "The configuration file is outdated."
+msgstr "配置文件已过期。"
+
+#: kpilot/kpilotConfig.cpp:165
+msgid "The configuration file has version %1, while KPilot needs version %2."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:170
+msgid ""
+"Please run KPilot and check the configuration carefully to update the file."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:174
+msgid "Important changes to watch for are:"
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:178
+msgid ""
+"Renamed conduits, Kroupware and file installer have been made conduits as "
+"well."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:181
+#, fuzzy
+msgid "Conflict resolution is now a global setting."
+msgstr "冲突解决"
+
+#: kpilot/kpilotConfig.cpp:186
+msgid "Changed format of no-backup databases."
+msgstr "已更改非备份数据库的格式。"
+
+#: kpilot/kpilotConfig.cpp:199
+msgid ""
+"The configuration file for KPilot is out-of date. Please run KPilot to "
+"update it."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
+msgid "Configuration File Out-of Date"
+msgstr "配置文件过期"
+
+#: kpilot/kpilotConfig.cpp:220
+msgid ""
+"The settings for the file installer have been moved to the conduits "
+"configuration. Check the installed conduits list."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:223
+msgid "Settings Updated"
+msgstr "设置已更新"
+
+#: kpilot/kpilotConfig.cpp:248
+msgid ""
+"<qt>The following old conduits were found on your system. It is a good idea "
+"to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:253
+msgid "Old Conduits Found"
+msgstr "找到了旧管道"
+
+#: kpilot/kpilotConfig.cpp:285
+msgid ""
+"<qt>The no backup databases listed in your configuration file have been "
+"adjusted to the new format. Database creator IDs have been changed to use "
+"square brackets []."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:289
+msgid "No Backup Databases Updated"
+msgstr "未更新备份数据库"
+
+#: kpilot/kpilotConfig.cpp:310
+msgid ""
+"KPilot is not configured for use. You may use the configuration wizard or "
+"the normal configure dialog to configure KPilot."
+msgstr ""
+
+#: kpilot/kpilotConfig.cpp:313
+msgid "Not Configured"
+msgstr "未配置"
+
+#: kpilot/kpilotConfig.cpp:314
+msgid "Use &Wizard"
+msgstr "使用向导(&W)"
+
+#: kpilot/kpilotConfig.cpp:315
+msgid "Use &Dialog"
+msgstr "使用对话框(&D)"
+
+#: kpilot/kpilotConfig.cpp:323
+msgid ""
+"The configuration file for KPilot is out-of date. KPilot can update some "
+"parts of the configuration automatically. Do you wish to continue?"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog.cpp:68
+msgid ""
+"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
+"want to save the changes before continuing?</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog.cpp:145
+msgid ""
+"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
+"This is probably unsupported and can cause problems. Are you sure you want "
+"to use this device name?</qt>"
+msgstr ""
+"<qt>您输入的设备名(<i>%1</i>)超过 13 个字符。这大概不被支持，而且会导致问题。"
+"您确定要使用这个名称吗？</qt>"
+
+#: kpilot/kpilotConfigDialog.cpp:150
+msgid "Device Name too Long"
+msgstr "设备名太长"
+
+#: kpilot/kpilotConfigDialog.cpp:150
+msgid "Use"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog.cpp:150
+#, fuzzy
+msgid "Do Not Use"
+msgstr "不要发送邮件(&D)"
+
+#: kpilot/kpilotConfigWizard.cpp:62
+msgid "Pilot Info"
+msgstr "Pilot 信息"
+
+#: kpilot/kpilotConfigWizard.cpp:64
+msgid "Application to Sync With"
+msgstr "同步的应用程序"
+
+#: kpilot/kpilotConfigWizard.cpp:127
+msgid "general TDE-PIM"
+msgstr "常规 TDE-PIM"
+
+#: kpilot/kpilotConfigWizard.cpp:133
+msgid ""
+"_: Gnome's PIM suite\n"
+"Evolution"
+msgstr "Evolution"
+
+#: kpilot/kpilotConfigWizard.cpp:157
+msgid ""
+"KPilot cannot yet synchronize the addressbook with Evolution, so the "
+"addressbook conduit was disabled.\n"
+"When syncing the calendar or to-do list using KPilot please quit Evolution "
+"before the sync, otherwise you will lose data."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cpp:157
+msgid "Restrictions with Evolution"
+msgstr "Evolution 的限制"
+
+#: kpilot/kpilotConfigWizard.cpp:162
+msgid ""
+"_: Kpilot will sync with nothing\n"
+"nothing (it will backup only)"
+msgstr "无(只备份)"
+
+#: kpilot/kpilotConfigWizard.cpp:166
+msgid ""
+"_: TDE's PIM suite\n"
+"Kontact"
+msgstr "Kontact"
+
+#: kpilot/kpilotConfigWizard.cpp:200
+#, c-format
+msgid "KPilot is now configured to sync with %1."
+msgstr "KPilot 现已配置与 %1 同步。"
+
+#: kpilot/kpilotConfigWizard.cpp:205
+msgid ""
+"The remaining options in the config dialog are advanced options and can be "
+"used to fine-tune KPilot."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cpp:210
+msgid "Automatic Configuration Finished"
+msgstr "自动配置完成"
+
+#: kpilot/kpilotConfigWizard.cpp:217
+msgid ""
+"Please put the handheld in the cradle, press the hotsync button and click on "
+"\"Continue\".\n"
+"\n"
+"Some kernel versions (Linux 2.6.x) have problems with the visor kernel "
+"module (for Sony Clie devices). Running an autodetection in that case might "
+"block the computer from doing hotsyncs until it is rebooted. In that case it "
+"might be advisable not to continue."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard.cpp:223
+msgid "Handheld Detection"
+msgstr "手持设备检测"
+
+#: kpilot/kpilotProbeDialog.cpp:90
+msgid "Autodetecting Your Handheld"
+msgstr "自动监测您的手持设备"
+
+#: kpilot/kpilotProbeDialog.cpp:90
+msgid "Restart Detection"
+msgstr "重新启动检测"
+
+#: kpilot/kpilotProbeDialog.cpp:97
+msgid ""
+"KPilot is now trying to automatically detect the device of your handheld. "
+"Please press the hotsync button if you have not done so already."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cpp:100
+msgid "Status"
+msgstr "状态"
+
+#: kpilot/kpilotProbeDialog.cpp:104
+msgid "Autodetection not yet started..."
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cpp:113
+msgid "Detected Values"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cpp:119
+msgid "Handheld user:"
+msgstr "手持设备用户："
+
+#: kpilot/kpilotProbeDialog.cpp:123
+msgid "Device:"
+msgstr "设备："
+
+#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
+msgid "[Not yet known]"
+msgstr "[尚未知]"
+
+#: kpilot/kpilotProbeDialog.cpp:195
+msgid "Starting detection..."
+msgstr "正在开始检测..."
+
+#: kpilot/kpilotProbeDialog.cpp:233
+msgid "Waiting for handheld to connect..."
+msgstr "正在等待手持设备连接..."
+
+#: kpilot/kpilotProbeDialog.cpp:266
+msgid "Timeout reached, could not detect a handheld."
+msgstr "达到超时，无法检测到手持设备。"
+
+#: kpilot/kpilotProbeDialog.cpp:267
+msgid ""
+"<qt>A handheld could not be detected. Possible check the following things:</"
+"p><ul><li> Have you pressed the hotsync button on the handheld?\n"
+"<li> Make sure the device sits in the cradle correctly.\n"
+"<li> Make sure the cradle is correctly plugged in to the computer.\n"
+"<li> Have you checked that your device is actually supported by kpilot (see "
+"http://www.kpilot.org).\n"
+"</ul>"
+msgstr ""
+
+#: kpilot/kpilotProbeDialog.cpp:273
+msgid "Automatic Detection Failed"
+msgstr "自动检测失败"
+
+#: kpilot/kpilotProbeDialog.cpp:288
+#, c-format
+msgid "Found a connected device on %1"
+msgstr "在 %1 上找到了连接的设备"
+
+#: kpilot/kpilotProbeDialog.cpp:338
+msgid "Disconnected from all devices"
+msgstr "从全部设备断开连接"
+
+#: kpilot/kroupware.cpp:126
+msgid "Syncing to-dos with KMail"
+msgstr "和 KMail 同步待办"
+
+#: kpilot/kroupware.cpp:135
+msgid "Syncing calendar with KMail"
+msgstr "和 KMail 同步日历"
+
+#: kpilot/kroupware.cpp:177
+msgid "Syncing Notes with Mail"
+msgstr "和 KMail 同步便笺"
+
+#: kpilot/kroupware.cpp:188
+msgid "Rewriting to-dos to KMail..."
+msgstr "向 KMail 重新写入待办..."
+
+#: kpilot/kroupware.cpp:195
+msgid "Rewriting Calendar to KMail"
+msgstr "向 KMail 重写写入日历"
+
+#: kpilot/kroupware.cpp:230
+msgid "Syncing KMail with Addresses "
+msgstr "同步 KMail 的地址"
+
+#: kpilot/kroupware.cpp:259
+msgid "Syncing KMail with Notes"
+msgstr "同步 KMail 的便笺"
+
+#: kpilot/logFile.cpp:97 lib/actions.cpp:134
+msgid "HotSync finished."
+msgstr "热同步结束。"
+
+#: kpilot/logWidget.cpp:90
+msgid ""
+"<qt>This lists all the messages received during the current HotSync</qt>"
+msgstr "<qt>这里列出所有在当前热同步中接收到的消息</qt>"
+
+#: kpilot/logWidget.cpp:119
+msgid "<qt><b>HotSync Log</b></qt>"
+msgstr "<qt><B>热同步日志</B></qt>"
+
+#: kpilot/logWidget.cpp:134
+msgid ""
+"_: Clear the text of HotSync messages\n"
+"Clear Log"
+msgstr "清除日志"
+
+#: kpilot/logWidget.cpp:136
+msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
+msgstr "<qt>从当前的热同步中清除消息列表。</qt>"
+
+#: kpilot/logWidget.cpp:140
+msgid "Save Log..."
+msgstr "保存日志..."
+
+#: kpilot/logWidget.cpp:141
+msgid ""
+"<qt>You can save the list of messages received during this HotSync to a file "
+"(for example for use in a bug report) by clicking here.</qt>"
+msgstr ""
+"<qt>点击此处，您可以把在本次热同步中接收的消息保存到文件中。(可以用在错误报告"
+"中)</qt>"
+
+#: kpilot/logWidget.cpp:150
+msgid "Sync progress:"
+msgstr "同步进度："
+
+#: kpilot/logWidget.cpp:153
+msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
+msgstr "<qt>当前热同步的完成比例(估计)</qt>"
+
+#: kpilot/logWidget.cpp:270
+msgid "<b>HotSync Finished.</b>"
+msgstr "<b>热同步完成。</b>"
+
+#: kpilot/logWidget.cpp:334
+msgid "Save Log"
+msgstr "保存日志文件"
+
+#: kpilot/logWidget.cpp:341
+msgid "The file exists. Do you want to overwrite it?"
+msgstr "文件已存在。你想覆盖它吗？"
+
+#: kpilot/logWidget.cpp:343
+msgid "File Exists"
+msgstr "文件已存在"
+
+#: kpilot/logWidget.cpp:343
+#, fuzzy
+msgid "Do Not Overwrite"
+msgstr "覆盖(&O)"
+
+#: kpilot/logWidget.cpp:367
+msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
+msgstr "<qt>无法打开文件“%1”写入；要重试吗？</qt>"
+
+#: kpilot/logWidget.cpp:369
+msgid "Cannot Save"
+msgstr "不能保存"
+
+#: kpilot/logWidget.cpp:369
+msgid "Try Again"
+msgstr ""
+
+#: kpilot/logWidget.cpp:369
+#, fuzzy
+msgid "Do Not Try"
+msgstr "什么也不做"
+
+#: kpilot/main-test.cpp:66
+msgid "Path to Pilot device node"
+msgstr "到 Pilot 设备节点的路径"
+
+#: kpilot/main-test.cpp:69
+#, fuzzy
+msgid "List DBs"
+msgstr "列出 DB (默认)"
+
+#: kpilot/main-test.cpp:71
+msgid "Backup Pilot to <dest dir>"
+msgstr ""
+
+#: kpilot/main-test.cpp:73
+msgid "Restore Pilot from backup"
+msgstr "从备份中恢复 Pilot"
+
+#: kpilot/main-test.cpp:76
+msgid "Run conduit from desktop file <filename>"
+msgstr "从桌面文件 <文件名> 运行管道"
+
+#: kpilot/main-test.cpp:80
+msgid "Run a specific check (with the device)"
+msgstr ""
+
+#: kpilot/main-test.cpp:83
+msgid "Show KPilot configuration information"
+msgstr ""
+
+#: kpilot/main-test.cpp:86
+#, fuzzy
+msgid "Set the debug level"
+msgstr "设置调试级别"
+
+#: kpilot/main-test.cpp:94
+msgid "*Really* run the conduit, not in test mode."
+msgstr "*真正*运行管道，而不是测试模式。"
+
+#: kpilot/main-test.cpp:98
+#, fuzzy
+msgid "Run the conduit in file-test mode."
+msgstr "*真正*运行管道，而不是测试模式。"
+
+#: kpilot/main-test.cpp:101
+#, fuzzy
+msgid "Copy Pilot to Desktop."
+msgstr "&Pilot 优先于桌面计算机"
+
+#: kpilot/main-test.cpp:104
+msgid "Copy Desktop to Pilot."
+msgstr ""
+
+#: kpilot/main-test.cpp:107
+msgid "Repeated perform action - only useful for --list"
+msgstr ""
+
+#: kpilot/main-test.cpp:347
+msgid "KPilotTest"
+msgstr "KPilotTest"
+
+#: kpilot/main-test.cpp:352
+msgid "KPilot Maintainer"
+msgstr "KPilot 维护者"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:38
+#: conduits/docconduit/doc-setupdialog.ui:43
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:28 conduits/knotes/setup_base.ui:34
+#: conduits/malconduit/mal-setup_dialog.ui:38
+#: conduits/memofileconduit/setup_base.ui:68
+#: conduits/notepadconduit/notepad-setup.ui:32 conduits/null/setup_base.ui:68
+#: conduits/recordconduit/setup_base.ui:68
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
+#: conduits/timeconduit/time-setup_dialog.ui:35
+#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
+#, no-c-format
+msgid "General"
+msgstr "常规"
+
+#: kpilot/main-test.cpp:359
+#, fuzzy
+msgid "Conduit Actions"
+msgstr "空管道选项"
+
+#: kpilot/memoWidget.cpp:234
+msgid ""
+"Select the category of addresses\n"
+"to display here."
+msgstr "选择在这里显示的地址类别。"
+
+#: kpilot/memoWidget.cpp:237
+msgid "Memos:"
+msgstr "备忘录："
+
+#: kpilot/memoWidget.cpp:249
+msgid ""
+"This list displays all the memos\n"
+"in the selected category. Click on\n"
+"one to display it to the right."
+msgstr ""
+"该列表显示选中类别中所有的备忘录。\n"
+"点击其中一个在右侧显示它。"
+
+#: kpilot/memoWidget.cpp:253
+msgid "Memo text:"
+msgstr "备忘录文本："
+
+#: kpilot/memoWidget.cpp:261
+msgid "The text of the selected memo appears here."
+msgstr "所选的备忘录的文本在这里出现。"
+
+#: kpilot/memoWidget.cpp:264
+msgid "Import Memo..."
+msgstr "导入备忘录..."
+
+#: kpilot/memoWidget.cpp:268
+msgid "Read a text file and add it to the Pilot's memo database."
+msgstr "读取一个文本文件，并把它添加到 Pilot 的备忘录数据库中。"
+
+#: kpilot/memoWidget.cpp:269
+msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
+msgstr ""
+
+#: kpilot/memoWidget.cpp:272
+msgid "Export Memo..."
+msgstr "导出备忘录..."
+
+#: kpilot/memoWidget.cpp:277
+msgid "Write the selected memo to a file."
+msgstr "把选中的备忘录写入文件。"
+
+#: kpilot/memoWidget.cpp:279
+msgid "Delete Memo"
+msgstr "删除备忘录"
+
+#: kpilot/memoWidget.cpp:284
+msgid "Delete the selected memo."
+msgstr "删除选中的备忘录。"
+
+#: kpilot/memoWidget.cpp:288
+msgid "Add Memo"
+msgstr "添加备忘"
+
+#: kpilot/memoWidget.cpp:291
+msgid "Add a new memo to the database."
+msgstr "在数据库中添加新备忘。"
+
+#: kpilot/memoWidget.cpp:343
+msgid "Delete currently selected memo?"
+msgstr "删除当前选中的备忘录？"
+
+#: kpilot/memoWidget.cpp:344
+msgid "Delete Memo?"
+msgstr "删除备忘录？"
+
+#: kpilot/memoWidget.cpp:367
+msgid "Cannot open MemoDB to delete record."
+msgstr ""
+
+#: kpilot/memoWidget.cpp:368
+msgid "Cannot Delete Memo"
+msgstr "无法删除备忘录"
+
+#: kpilot/pilotComponent.cpp:153
+msgid "All"
+msgstr "全部"
+
+#: kpilot/pilotDaemon.cpp:157
+msgid "Start &KPilot"
+msgstr "启动 &KPilot"
+
+#: kpilot/pilotDaemon.cpp:159
+msgid "&Configure KPilot..."
+msgstr "配置 KPilot(&C)..."
+
+#: kpilot/pilotDaemon.cpp:164
+msgid ""
+"_: Appended to names of sync types to indicate the sync will happen just one "
+"time\n"
+" (once)"
+msgstr "(一次)"
+
+#: kpilot/pilotDaemon.cpp:168
+msgid "Default (%1)"
+msgstr "默认(%1)"
+
+#: kpilot/pilotDaemon.cpp:185
+msgid "Next &Sync"
+msgstr "下次同步(&S)"
+
+#: kpilot/pilotDaemon.cpp:670
+msgid "Next HotSync will be: %1. "
+msgstr "下次热同步为：%1。"
+
+#: kpilot/pilotDaemon.cpp:902
+msgid "HotSync is disabled while the screen is locked."
+msgstr ""
+
+#: kpilot/pilotDaemon.cpp:907
+msgid ""
+"HotSync is disabled because KPilot could not determine the state of the "
+"screen saver. You can disable this security feature by unchecking the 'do "
+"not sync when screensaver is active' box in the HotSync page of the "
+"configuration dialog."
+msgstr ""
+
+#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
+msgid "HotSync Completed.<br>"
+msgstr "热同步完成。<br>"
+
+#: kpilot/pilotDaemon.cpp:1274
+#, fuzzy, c-format
+msgid "Next sync is %1."
+msgstr "无同步"
+
+#: kpilot/pilotDaemon.cpp:1298
+msgid "Device to try first"
+msgstr "先尝试的设备"
+
+#: kpilot/pilotDaemon.cpp:1299
+msgid "Exit instead of complaining about bad configuration files"
+msgstr ""
+
+#: kpilot/pilotDaemon.cpp:1311
+msgid "KPilot Daemon"
+msgstr "KPilot 守护进程"
+
+#: kpilot/pilotDaemon.cpp:1326
+msgid "Developer"
+msgstr "开发者"
+
+#: kpilot/todoEditor.cpp:48
+msgid "To-do Editor"
+msgstr "待办编辑器"
+
+#: kpilot/todoWidget.cpp:174
+msgid "There are still %1 to-do editing windows open."
+msgstr "仍有 %1 个待办编辑窗口打开着。"
+
+#: kpilot/todoWidget.cpp:178
+#, c-format
+msgid ""
+"_n: There is still a to-do editing window open.\n"
+"There are still %n to-do editing windows open."
+msgstr "仍有 %n 个待办编辑窗口打开着。"
+
+#: kpilot/todoWidget.cpp:218
+msgid "<qt>Select the category of to-dos to display here.</qt>"
+msgstr "<qt>选择要在这里显示的待办类别。</qt>"
+
+#: kpilot/todoWidget.cpp:225
+msgid "To-do Item"
+msgstr "待办项"
+
+#: kpilot/todoWidget.cpp:243
+#, fuzzy
+msgid ""
+"<qt>This list displays all the to-dos in the selected category. Click on one "
+"to display it to the right.</qt>"
+msgstr "<qt>该列表显示了所选类别中的所有地址。点击其中一个在右边显示它。</qt>"
+
+#: kpilot/todoWidget.cpp:247
+msgid "To-do info:"
+msgstr "待办信息："
+
+#: kpilot/todoWidget.cpp:262
+#, fuzzy
+msgid "<qt>You can edit a to-do when it is selected.</qt>"
+msgstr "<qt>当某地址被选中时，您可以编辑它。</qt>"
+
+#: kpilot/todoWidget.cpp:270
+msgid "<qt>Add a new to-do to the to-do list.</qt>"
+msgstr "<qt>在地址簿中添加一个新待办。</qt>"
+
+#: kpilot/todoWidget.cpp:271
+msgid ""
+"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
+"qt>"
+msgstr ""
+
+#: kpilot/todoWidget.cpp:280
+msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
+msgstr "<qt>从待办列表中删除选中的待办。</qt>"
+
+#: kpilot/todoWidget.cpp:408
+#, fuzzy
+msgid ""
+"You cannot add to-dos to the to-do list until you have done a HotSync at "
+"least once to retrieve the database layout from your Pilot."
+msgstr ""
+"在您至少执行了一次热同步，并从您的 Pilot 中检索到数据库布局之前，您不能在地址"
+"簿中添加地址。"
+
+#: kpilot/todoWidget.cpp:411
+msgid "Cannot Add New To-do"
+msgstr "不能添加新待办"
+
+#: lib/actionQueue.cpp:136
+msgid ""
+"The connection to the handheld was lost. Synchronization cannot continue."
+msgstr ""
+
+#: lib/actions.cpp:54
+msgid "KPilot %1 HotSync starting...\n"
+msgstr "KPilot %1 热同步开始...\n"
+
+#: lib/actions.cpp:56
+msgid "Using encoding %1 on the handheld."
+msgstr "在手持设备上使用编码 %1。"
+
+#: lib/actions.cpp:67
+msgid "KPilot is busy and cannot process the HotSync right now."
+msgstr ""
+
+#: lib/actions.cpp:114
+msgid "Testing.\n"
+msgstr "测试。\n"
+
+#: lib/actions.cpp:130
+msgid "Syncing database %1..."
+msgstr "正在同步数据库 %1..."
+
+#: lib/kpilotdevicelink.cpp:148
+msgid "Could not open device: %1 (will retry)"
+msgstr "无法打开设备：%1 (将会重试)"
+
+#: lib/kpilotdevicelink.cpp:187
+msgid "Trying to open device %1..."
+msgstr "正在试图打开设备 %1..."
+
+#: lib/kpilotdevicelink.cpp:241
+msgid "Already listening on that device"
+msgstr ""
+
+#: lib/kpilotdevicelink.cpp:261
+#, fuzzy
+msgid "Cannot create socket for communicating with the Pilot (%1)"
+msgstr "无法创建用来与 Pilot 通信的套接字"
+
+#: lib/kpilotdevicelink.cpp:289
+msgid "Cannot open Pilot port \"%1\". "
+msgstr "不能打开 Pilot 端口“%1”。"
+
+#: lib/kpilotdevicelink.cpp:391
+msgid "Cannot listen on Pilot socket (%1)"
+msgstr "不能监听 Pilot 套接字(%1)"
+
+#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
+msgid "Cannot accept Pilot (%1)"
+msgstr "不能接受 Pilot (%1)"
+
+#: lib/kpilotdevicelink.cpp:427
+msgid "already connected"
+msgstr "已连接"
+
+#: lib/kpilotdevicelink.cpp:441
+msgid "Unable to read system information from Pilot"
+msgstr "无法从 Pilot 读取系统信息"
+
+#: lib/kpilotdevicelink.cpp:478
+msgid "Checking last PC..."
+msgstr "正在检查最后的 PC..."
+
+#: lib/kpilotdevicelink.cpp:487
+msgid ""
+"Could not read user information from the Pilot. Perhaps you have a password "
+"set on the device?"
+msgstr "无法从 Pilot 读取用户信息。也许您在该设备上设置了口令？"
+
+#: lib/kpilotdevicelink.cpp:670
+msgid "The Pilot device is not configured yet."
+msgstr "Pilot 设备尚未配置。"
+
+#: lib/kpilotdevicelink.cpp:709
+msgid "Pilot device %1 is not read-write."
+msgstr "Pilot 设备 %1 不是可读写模式。"
+
+#: lib/kpilotdevicelink.cpp:719
+msgid ""
+"Pilot device %1 does not exist. Probably it is a USB device and will appear "
+"during a HotSync."
+msgstr ""
+
+#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
+msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
+msgstr "<qt>不能安装文件“%1”。</qt>"
+
+#: lib/kpilotdevicelink.cpp:846
+msgid "End of HotSync\n"
+msgstr "热同步结束\n"
+
+#: lib/kpilotdevicelinkPrivate.h:307
+msgid " The port does not exist."
+msgstr " 端口不存在。"
+
+#: lib/kpilotdevicelinkPrivate.h:310
+#, fuzzy
+msgid " There is no such device."
+msgstr " 没有此类设备。"
+
+#: lib/kpilotdevicelinkPrivate.h:313
+msgid " You do not have permission to open the Pilot device."
+msgstr " 您没有打开 Pilot 设备的权限。"
+
+#: lib/kpilotdevicelinkPrivate.h:317
+msgid " Check Pilot path and permissions."
+msgstr " 检查 Pilot 路径和权限。"
+
+#: lib/pilotDateEntry.cpp:179
+#, c-format
+msgid "Start date: %1"
+msgstr "开始日期：%1"
+
+#: lib/pilotDateEntry.cpp:185
+msgid "Whole-day event"
+msgstr "全天事件"
+
+#: lib/pilotDateEntry.cpp:193
+#, c-format
+msgid "End date: %1"
+msgstr "结束日期：%1"
+
+#: lib/pilotDateEntry.cpp:200
+msgid ""
+"_: %1 is the duration, %2 is the time unit\n"
+"Alarm: %1 %2 before event starts"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:204
+msgid "minutes"
+msgstr "分"
+
+#: lib/pilotDateEntry.cpp:205
+msgid "hours"
+msgstr "小时"
+
+#: lib/pilotDateEntry.cpp:206
+msgid "days"
+msgstr "天"
+
+#: lib/pilotDateEntry.cpp:216
+msgid "Recurrence: every %1 %2"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:222
+msgid "day(s)"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:223
+msgid "week(s)"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:225
+msgid "month(s)"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:226
+msgid "year(s)"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:235
+msgid "Repeats indefinitely"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:240
+#, c-format
+msgid "Until %1"
+msgstr "直至 %1"
+
+#: lib/pilotDateEntry.cpp:244
+msgid "Repeating on the i-th day of week j"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:245
+msgid "Repeating on the n-th day of the month"
+msgstr ""
+
+#: lib/pilotDateEntry.cpp:263
+msgid "Exceptions:"
+msgstr "例外："
+
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
+msgid "<b><em>Note:</em></b><br>"
+msgstr "<b><em>注意：</em></b><br>"
+
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
+msgid "Note:\n"
+msgstr "注意：\n"
+
+#: lib/pilotMemo.cpp:81
+msgid ""
+"<i>Title:</i> %1<br>\n"
+"<i>MemoText:</i><br>%2"
+msgstr ""
+
+#: lib/pilotMemo.cpp:86
+msgid ""
+"Title: %1\n"
+"MemoText:\n"
+"%2"
+msgstr ""
+
+#: lib/pilotTodoEntry.cpp:133
+msgid "Completed"
+msgstr "已完成"
+
+#: lib/pilotTodoEntry.cpp:135
+msgid "Not completed"
+msgstr "未完成"
+
+#: lib/pilotTodoEntry.cpp:143
+#, c-format
+msgid "Due date: %1"
+msgstr "到期日期：%1"
+
+#: lib/pilotTodoEntry.cpp:151
+#, c-format
+msgid "Priority: %1"
+msgstr "优先级：%1"
+
+#: lib/plugin.cpp:73
+msgid "Unnamed"
+msgstr "无名氏"
+
+#: lib/plugin.cpp:93
+msgid ""
+"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
+"the changes before continuing?</qt>"
+msgstr ""
+
+#: lib/plugin.cpp:105
+msgid "%1 Conduit"
+msgstr "%1 管道"
+
+#: lib/plugin.cpp:144
+msgid "Send questions and comments to [email protected]"
+msgstr "把疑问与评论发送给 [email protected]。"
+
+#: lib/plugin.cpp:194
+msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
+msgstr "把疑问与评论发送给 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cpp:198
+msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
+msgstr "把错误报告发送给 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cpp:202
+msgid ""
+"For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
+"\">KPilot User's Guide</a>."
+msgstr ""
+
+#: lib/plugin.cpp:213
+msgid "<b>Authors:</b> "
+msgstr "<b>作者：</b> "
+
+#: lib/plugin.cpp:234
+msgid "<b>Credits:</b> "
+msgstr "<b>致谢：</b> "
+
+#: lib/plugin.cpp:480
+msgid "Large Changes Detected"
+msgstr ""
+
+#: lib/plugin.cpp:482
+msgid ""
+"The %1 conduit has made a large number of changes to your %2.  Do you want "
+"to allow this change?\n"
+"Details:\n"
+"\t%3"
+msgstr ""
+
+#: lib/plugin.cpp:536
+#, c-format
+msgid "Could not find conduit %1."
+msgstr "找不到管道 %1。"
+
+#: lib/plugin.cpp:559
+#, c-format
+msgid "Could not load conduit %1."
+msgstr "无法载入管道 %1。"
+
+#: lib/plugin.cpp:571
+msgid "Conduit %1 has wrong version (%2)."
+msgstr ""
+
+#: lib/plugin.cpp:581
+#, fuzzy, c-format
+msgid "Could not initialize conduit %1."
+msgstr "找不到管道 %1。"
+
+#: lib/plugin.cpp:594 lib/plugin.cpp:603
+#, c-format
+msgid "Could not create conduit %1."
+msgstr "无法创建管道 %1。"
+
+#: lib/plugin.cpp:607
+msgid "[Conduit %1]"
+msgstr "[管道 %1]"
+
+#: lib/plugin.cpp:749
+msgid "Start: %1. End: %2. "
+msgstr ""
+
+#: lib/plugin.cpp:751
+msgid "%1 new. "
+msgstr ""
+
+#: lib/plugin.cpp:752
+#, fuzzy
+msgid "%1 changed. "
+msgstr "已改变"
+
+#: lib/plugin.cpp:753
+#, fuzzy
+msgid "%1 deleted. "
+msgstr "已删除"
+
+#: lib/plugin.cpp:755
+#, fuzzy
+msgid "No changes made. "
+msgstr "无改变。"
+
+#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
+msgid "Unable to open the %1 database on the handheld."
+msgstr "无法打开手持设备上的 %1 数据库。"
+
+#: lib/recordConduit.cpp:295
+#, c-format
+msgid "Unable to open %1."
+msgstr "无法打开 %1。"
+
+#: lib/syncAction.cpp:103
+msgid "The conduit %1 could not be executed."
+msgstr "管道 %1 无法被执行。"
+
+#: lib/syncAction.cpp:205
+msgid "Full Synchronization"
+msgstr "完全同步"
+
+#: lib/syncAction.cpp:209
+msgid "Restore From Backup"
+msgstr "从备份中恢复"
+
+#: lib/syncAction.cpp:220
+msgid "Test Sync"
+msgstr "测试同步"
+
+#: lib/syncAction.cpp:224
+#, fuzzy
+msgid "Local Sync"
+msgstr "无同步"
+
+#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
+msgid "Question"
+msgstr "问题"
+
+#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
+msgid "&Do not ask again"
+msgstr "不要再次提问(&D)"
+
+#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
+#, fuzzy
+msgid "Do not ask again"
+msgstr "不要再次提问(&D)"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:18
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:32
+#, fuzzy, no-c-format
+msgid "KPilot Custom Fields"
+msgstr "定制 4："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:35
+#, no-c-format
+msgid ""
+"On your handheld, each address also provides four custom fields for your "
+"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
+"just store them as a custom field on your PC with no special meaning. In the "
+"last case, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:46
+#, fuzzy, no-c-format
+msgid "Custom &3:"
+msgstr "定制 3："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:52
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:74
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the third custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:60
+#, fuzzy, no-c-format
+msgid "Custom &4:"
+msgstr "定制 4："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:66
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:90
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:82
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:104
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the second custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:98
+#, fuzzy, no-c-format
+msgid "Custom &2:"
+msgstr "定制 2："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:112
+#, fuzzy, no-c-format
+msgid "Custom &1:"
+msgstr "定制 1："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:118
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:134
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the first custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:142
+#, no-c-format
+msgid ""
+"If you let KPilot sync the handheld's custom fields as custom fields on the "
+"PC, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:158
+#, no-c-format
+msgid "KPilot's Private (meta-sync) Settings"
+msgstr ""
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:169
+#, fuzzy, no-c-format
+msgid "Record&ID:"
+msgstr "新记录"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:180
+#, fuzzy, no-c-format
+msgid "Sync &flag:"
+msgstr "全部同步(&A)"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:225
+#, no-c-format
+msgid ""
+"These values indicate the state of the record for KPilot, and connect an "
+"entry on the handheld with an entry on the PC.\n"
+"Do NOT change these values: doing so will almost certainly result in data "
+"loss when you next do a sync."
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:66
+#: conduits/vcalconduit/korganizerConduit.ui:94
+#, fuzzy, no-c-format
+msgid "Sync Destination"
+msgstr "同步动作"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:77
+#, no-c-format
+msgid "&Standard addressbook"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:80
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. "
+"the addressbook that you edit in KAddressBook, and which you use in KMail)</"
+"qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:91
+#, fuzzy, no-c-format
+msgid "vCard &file:"
+msgstr "日历文件："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:94
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific address book file, instead of the "
+"standard TDE address book. This file must be in the vCard format (.vcf). "
+"Type the location of this file in the edit box or select it clicking the "
+"file picker button.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:113
+#, no-c-format
+msgid ""
+"<qt>Enter the vCard file name here or select it by clicking the file picker "
+"button. vCard is a standard format for exchanging contact information. </qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:123
+#, no-c-format
+msgid "Store &archived records in the TDE addressbook"
+msgstr "在 TDE 地址簿中贮存归档记录(&A)"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:126
+#, no-c-format
+msgid ""
+"<qt>If you delete an address on your handheld, you can determine if it "
+"should be archived on the PC. If you check that and this checkbox, the "
+"address will be added to your addressbook, but no longer synchronized with "
+"the handheld.</qt>"
+msgstr ""
+"<qt>如果您删除手持设备上的一个地址，您可以决定是否要将它在 PC 上归档。如果您"
+"选择了那一项以及这个复选框，该地址将会被添加到您的地址簿中，但不再与手持设备"
+"同步。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:136
+#: conduits/docconduit/doc-setupdialog.ui:390
+#: conduits/vcalconduit/korganizerConduit.ui:165
+#, fuzzy, no-c-format
+msgid "Conflicts"
+msgstr "冲突"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:166
+#: conduits/vcalconduit/korganizerConduit.ui:184
+#: kpilot/kpilotConfigDialog_sync.ui:148
+#, fuzzy, no-c-format
+msgid "Conflict &resolution:"
+msgstr "冲突解决方案"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:172
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:218
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
+"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
+"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
+"entry on both the PC and handheld.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:178
+#: conduits/vcalconduit/korganizerConduit.ui:193
+#, fuzzy, no-c-format
+msgid "Use KPilot's Global Setting"
+msgstr "KPilot 守护进程"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:183
+#: conduits/vcalconduit/korganizerConduit.ui:198
+#: kpilot/kpilotConfigDialog_sync.ui:100
+#, fuzzy, no-c-format
+msgid "Ask User"
+msgstr "询问用户(&A)"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:188
+#: conduits/vcalconduit/korganizerConduit.ui:203
+#: kpilot/kpilotConfigDialog_sync.ui:105
+#, no-c-format
+msgid "Do Nothing"
+msgstr "什么也不做"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:193
+#: conduits/vcalconduit/korganizerConduit.ui:208
+#: kpilot/kpilotConfigDialog_sync.ui:110
+#, fuzzy, no-c-format
+msgid "Handheld Overrides"
+msgstr "手持设备优先"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:198
+#: conduits/vcalconduit/korganizerConduit.ui:213
+#: kpilot/kpilotConfigDialog_sync.ui:115
+#, fuzzy, no-c-format
+msgid "PC Overrides"
+msgstr "PC 优先"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:203
+#: conduits/vcalconduit/korganizerConduit.ui:218
+#: kpilot/kpilotConfigDialog_sync.ui:120
+#, fuzzy, no-c-format
+msgid "Values From Last Sync (if possible)"
+msgstr "尽可能做快速同步(&F)"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:208
+#: conduits/vcalconduit/korganizerConduit.ui:223
+#: kpilot/kpilotConfigDialog_sync.ui:125
+#, fuzzy, no-c-format
+msgid "Use Both Entries"
+msgstr "两项都使用"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:226
+#, no-c-format
+msgid ""
+"<p>Select the default action if an event was modified on both sides here. </"
+"p>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:258
+#, no-c-format
+msgid "Fields"
+msgstr "字段"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:275
+#, fuzzy, no-c-format
+msgid "Handheld other phone:"
+msgstr "Pilot 上的另外电话："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:278
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:334
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"&quot;Other&quot; phone here.</qt>"
+msgstr ""
+"<qt>选择 KAddressbook 中哪个字段应该被用来贮存 Pilot 上的“另外”的电话。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:284
+#, no-c-format
+msgid "Other Phone"
+msgstr "另外的电话"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:289
+#, no-c-format
+msgid "Assistant"
+msgstr "助手"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:294
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:385
+#, no-c-format
+msgid "Business Fax"
+msgstr "商务传真"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:299
+#, no-c-format
+msgid "Car Phone"
+msgstr "汽车电话"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:304
+#, no-c-format
+msgid "Email 2"
+msgstr "电子邮件 2"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:309
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:380
+#, no-c-format
+msgid "Home Fax"
+msgstr "家庭传真"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:314
+#, no-c-format
+msgid "Telex"
+msgstr "电传"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:319
+#, no-c-format
+msgid "TTY/TTD Phone"
+msgstr "TTY/TTD 电话"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:342
+#, fuzzy, no-c-format
+msgid "Handheld street address:"
+msgstr "Pilot 上的街道地址："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:345
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:363
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"Street Address here.</qt>"
+msgstr ""
+"<qt>选择 KAddressbook 中的哪个字段应该被用来贮存 Pilot 上的街道地址。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:351
+#, fuzzy, no-c-format
+msgid "Preferred, then Home Address"
+msgstr "家庭住址"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:356
+#, fuzzy, no-c-format
+msgid "Preferred, then Business Address"
+msgstr "公司地址"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:371
+#, fuzzy, no-c-format
+msgid "Handheld fax:"
+msgstr "手持设备 ->PC"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:374
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:392
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Fax number "
+"from the Pilot here.</qt>"
+msgstr ""
+"<qt>选择 KAddressbook 中的哪个字段应该被用来贮存 Pilot 上的传真号码。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:419
+#, fuzzy, no-c-format
+msgid "Custom Fields"
+msgstr "定制 4："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:438
+#, no-c-format
+msgid "Handheld custom field 1:"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:441
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:510
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the first custom field on your handheld.</qt>"
+msgstr "<qt>选择要在这里显示的地址类别。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:449
+#, no-c-format
+msgid "Handheld custom field 2:"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:452
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:546
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the second custom field on your handheld.</qt>"
+msgstr "<qt>选择要在这里显示的地址类别。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:460
+#, no-c-format
+msgid "Handheld custom field 3:"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:463
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:582
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the third custom field on your handheld.</qt>"
+msgstr "<qt>选择要在这里显示的地址类别。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:471
+#, no-c-format
+msgid "Handheld custom field 4:"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:474
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:618
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the fourth custom field on your handheld.</qt>"
+msgstr "<qt>选择要在这里显示的地址类别。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:480
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:516
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:552
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:588
+#, fuzzy, no-c-format
+msgid "Store as Custom Field"
+msgstr "定制 4："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:485
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:521
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:557
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:593
+#, no-c-format
+msgid "Birthdate"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:490
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:526
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:562
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:598
+#, no-c-format
+msgid "URL"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:495
+#, no-c-format
+msgid "IM Address (ICQ, MS, ...)"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:531
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:567
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:603
+#, no-c-format
+msgid "IM Address (ICQ, MSN, ...)"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:640
+#, fuzzy, no-c-format
+msgid "Date &format:"
+msgstr "数据库信息"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:646
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:700
+#, no-c-format
+msgid ""
+"<qt>Select the birthdate format here, if you selected \"birthdate\" for any "
+"of the custom fields above. Possible placeholders are:<br> %d for the day, "
+"%m for the month, %y for the two-digit year, %Y for the four-digit year. "
+"For  example, %d.%m.%Y would generate a date like 27.3.1952, while %m/%d/%y "
+"would write the same date as 03/27/52. </qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:652
+#, fuzzy, no-c-format
+msgid "Locale Settings"
+msgstr "插件设置"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:657
+#, no-c-format
+msgid "%d.%m.%Y"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:662
+#, no-c-format
+msgid "%d.%m.%y"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:667
+#, no-c-format
+msgid "%d/%m/%Y"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:672
+#, no-c-format
+msgid "%d/%m/%y"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:677
+#, no-c-format
+msgid "%m/%d/%Y"
+msgstr ""
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:682
+#, no-c-format
+msgid "%m/%d/%y"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:16
+#, no-c-format
+msgid "widget2"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:27
+#, no-c-format
+msgid ""
+"The following record was edited both on the handheld and on the PC. Please "
+"choose which values shall be synced:"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:36
+#, fuzzy, no-c-format
+msgid "Field"
+msgstr "字段"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:55
+#, no-c-format
+msgid ""
+"<qt>Use this list to resolve, field by field, the conflicts created when a "
+"record was edited both on the handheld and on the PC. For each record, the "
+"different values from the last sync, the handheld and PC are displayed for "
+"each field, allowing you to choose the desired value.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:63
+#, no-c-format
+msgid ""
+"Line breaks in any of the entries are denoted by a \" | \" (without the "
+"quotes)."
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:85
+#, fuzzy, no-c-format
+msgid "&Keep Both"
+msgstr "保持两者"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:88
+#, no-c-format
+msgid ""
+"<qt>Click this button to use both values, resulting in the duplication of "
+"the record.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:96
+#, no-c-format
+msgid "&PC Values"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:99
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the PC values for synchronizing all conflicting "
+"fields in this record.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:107
+#, fuzzy, no-c-format
+msgid "&Last Sync Values"
+msgstr "同步文件(&S)"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:110
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the last sync values (old values) for "
+"synchronizing all conflicting fields in this record.</qt>"
+msgstr ""
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:118
+#, fuzzy, no-c-format
+msgid "&Handheld Values"
+msgstr "手持设备优先"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:121
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the handheld values for synchronizing all "
+"conflicting fields in this record.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:54
+#, fuzzy, no-c-format
+msgid "&Text files:"
+msgstr "CVS 文件名："
+
+#: conduits/docconduit/doc-setupdialog.ui:60
+#: conduits/docconduit/doc-setupdialog.ui:82
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder used to find and synchronize text files. All files "
+"with extension .txt located in this folder will be synced to Palm DOC "
+"databases in your handheld.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:68
+#, no-c-format
+msgid "Local co&py:"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:74
+#, no-c-format
+msgid ""
+"<qt>Check this box if you want to save a copy of the Palm DOC databases (."
+"pdb files) on your PC.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:90
+#, fuzzy, no-c-format
+msgid "Synchronization Mode"
+msgstr "同步模式："
+
+#: conduits/docconduit/doc-setupdialog.ui:107
+#, fuzzy, no-c-format
+msgid "Sync only P&C to PDA"
+msgstr "只将 P&C 上的改动同步到 PDA"
+
+#: conduits/docconduit/doc-setupdialog.ui:113
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"not be converted to text files, but texts changed in the PC will be "
+"converted to the Palm DOC databases.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:121
+#, fuzzy, no-c-format
+msgid "Sync only P&DA to PC"
+msgstr "只将 P&DA 上的改动同步到 PC"
+
+#: conduits/docconduit/doc-setupdialog.ui:124
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the changes made to Palm DOC databases "
+"in your handheld to the PC text files. Palm DOC databases modified in the "
+"handheld will be converted to text files, but texts changed in the PC will "
+"not be converted to the Palm DOC databases.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:132
+#, fuzzy, no-c-format
+msgid "Sync &all"
+msgstr "全部同步(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:141
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"be converted to text files, and texts changed in the PC will be converted to "
+"the Palm DOC databases, keeping both versions in sync.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:168
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder where copies of the handheld databases are kept (.pdb "
+"files). Local copies are only made if the box is checked as well.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:178
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:168
+#, no-c-format
+msgid "PC -> Handheld"
+msgstr "PC -> 手持设备"
+
+#: conduits/docconduit/doc-setupdialog.ui:189
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:255
+#, fuzzy, no-c-format
+msgid "&Compress"
+msgstr "压缩(&C)"
+
+#: conduits/docconduit/doc-setupdialog.ui:195
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:261
+#, no-c-format
+msgid ""
+"Check this box, if the text should be compressed on the handheld to save "
+"memory. Most doc reader on the handheld support compressed texts."
+msgstr ""
+"如果要在手持设备上使用压缩的文本节省内存，请选中此项。手持设备上的多数 DOC 阅"
+"读器都支持压缩的文本。"
+
+#: conduits/docconduit/doc-setupdialog.ui:198
+#, fuzzy, no-c-format
+msgid ""
+"<qt>The Palm DOC format supports compressing the text to save memory. Check "
+"this box to enable text compression, so the resulting Palm DOC database will "
+"consume about 50% less memory than in uncompressed state. Almost all DOC "
+"readers on the Palm support compressed texts.</qt>"
+msgstr ""
+"Palm doc 格式支持压缩文本，从而节省内存。如果您选中此选项，同样的文本会比未压"
+"缩的少用大约 50% 的内存。几乎所有 Palm 上的 DOC 阅读器都支持压缩的文本。"
+
+#: conduits/docconduit/doc-setupdialog.ui:206
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:272
+#, fuzzy, no-c-format
+msgid "Convert &bookmarks"
+msgstr "转换书签(&B)"
+
+#: conduits/docconduit/doc-setupdialog.ui:212
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to enable bookmark creation when converting text files to "
+"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
+"bookmark, it is necessary to to provide the location in the text where the "
+"bookmark should be set and the bookmark title, in at least one of the "
+"formats listed below.</qt>"
+msgstr ""
+"您要转换书签吗？多数 doc 阅读器支持书签。您需要提供关于在何处设置书签的信息以"
+"及它们的标题。请至少选中一种下面的书签类型。"
+
+#: conduits/docconduit/doc-setupdialog.ui:237
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:230
+#, fuzzy, no-c-format
+msgid "&Inline tags in text"
+msgstr "标记内嵌在文本中(&I)"
+
+#: conduits/docconduit/doc-setupdialog.ui:243
+#, no-c-format
+msgid ""
+"Check this box to create bookmarks from inline tags in the text. The inline "
+"tag consist of tags in the form <* bookmarktext *>. The bookmark location is "
+"set using the location of the inline tag in the text, and  the name is the "
+"text between the <* and the *>. The inline tag (<*...*>) will be removed "
+"from the text."
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:251
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:155
+#, no-c-format
+msgid "&Encoding:"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:262
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:244
+#, fuzzy, no-c-format
+msgid "&Tags at end of text"
+msgstr "文本结尾的标签(&T)"
+
+#: conduits/docconduit/doc-setupdialog.ui:265
+#, fuzzy, no-c-format
+msgid ""
+"Check this box to convert tags of the form <bookmarkname> at the end of the "
+"text to bookmarks. The text inside the tag (\"bookmarkname\") will be "
+"searched in the text, and whenever found, a bookmark will be set there. The "
+"endtags <...> will then be removed from the end of the text."
+msgstr ""
+"在文本结尾的形如 <书签名称> 的标签将被用于查找 < 和 > 之间的字符串。每当“书签"
+"名称”出现在文本中时，就会在该处设置一个书签。然后结尾标签 <...> 将从文本结尾"
+"去掉。"
+
+#: conduits/docconduit/doc-setupdialog.ui:273
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:286
+#, fuzzy, no-c-format
+msgid "Regular &expressions in .bmk file"
+msgstr ".bmk 文件中使用正则表达式(&E)"
+
+#: conduits/docconduit/doc-setupdialog.ui:276
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to use regular expressions in a file to search the text "
+"for bookmarks. The file should have the same name as the text file, but "
+"should end in .bmk instead of .txt (for instance, the regular expression "
+"file for textname.txt should be textname.bmk). See the documentation for a "
+"description of the format of the bmk file.</qt>"
+msgstr ""
+"在文件 textname.bmk 中(textname.txt 是文本文件名)使用正则表达式搜索文本中的书"
+"签。关于 bmk 文件格式的说明请参见文档。"
+
+#: conduits/docconduit/doc-setupdialog.ui:291
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:316
+#, fuzzy, no-c-format
+msgid "Handheld -> PC"
+msgstr "手持设备 ->PC"
+
+#: conduits/docconduit/doc-setupdialog.ui:319
+#, fuzzy, no-c-format
+msgid "Do not convert, if text unchanged (only bookmarks)"
+msgstr "如果只有书签发生改变(文本未改变)则不作转换(&B)"
+
+#: conduits/docconduit/doc-setupdialog.ui:322
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to avoid syncing the text on the handheld to the PC if "
+"you only changed the bookmarks on the handheld (but not the text).</qt>"
+msgstr ""
+"如果您只改变了手持设备上的书签，而未改变文本，因而不想将手持设备上的文本同步"
+"到 PC，请选中此项。"
+
+#: conduits/docconduit/doc-setupdialog.ui:330
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:344
+#, no-c-format
+msgid "Convert Bookmarks"
+msgstr "转换书签"
+
+#: conduits/docconduit/doc-setupdialog.ui:341
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:372
+#, fuzzy, no-c-format
+msgid "Do &not convert bookmarks"
+msgstr "不转换书签(&N)"
+
+#: conduits/docconduit/doc-setupdialog.ui:347
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or "
+"to a bookmark file.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:355
+#, fuzzy, no-c-format
+msgid "Convert into .bm &file"
+msgstr "转换为 .bmk 文件(&F)"
+
+#: conduits/docconduit/doc-setupdialog.ui:364
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
+"file, in the bmk format (see more about this format in the documentation). "
+"The resulting bookmark file shares the same filename as the resulting .txt "
+"file, but ends in .bmk instead. This approach creates a clean text file and "
+"a bookmark file.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:372
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:358
+#, no-c-format
+msgid "Convert as &inline tags"
+msgstr "转换为内嵌标签(&I)"
+
+#: conduits/docconduit/doc-setupdialog.ui:378
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to inline "
+"tags, in the form &lt;* BookmarkName *&gt;. These tags are inserted in the "
+"text in the position marked by the bookmark, and the text inside the tag "
+"corresponds to the bookmark name. Inline tags are easy to create, delete, "
+"move and edit.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:404
+#, no-c-format
+msgid ""
+"If the same text was changed on the PC and the handheld, which of the two "
+"versions should be used as the new version?"
+msgstr ""
+"如果同样的文字在 PC 和手持设备上都被改变，哪一个版本应该用作新的版本呢？"
+
+#: conduits/docconduit/doc-setupdialog.ui:407
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, the "
+"choice is between working with the files out of sync, or discarding the "
+"changes in one of them.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:418
+#, no-c-format
+msgid "&No resolution"
+msgstr "不解决(&N)"
+
+#: conduits/docconduit/doc-setupdialog.ui:424
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to prevent "
+"KPilot from overwriting your modifications.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:432
+#, no-c-format
+msgid "P&DA overrides"
+msgstr "P&DA 优先"
+
+#: conduits/docconduit/doc-setupdialog.ui:438
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to make the PDA "
+"version overwrite the PC version in case of conflict.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:446
+#, no-c-format
+msgid "P&C overrides"
+msgstr "P&C 优先"
+
+#: conduits/docconduit/doc-setupdialog.ui:452
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to make the PC "
+"version overwrite the PDA version in case of conflict.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:460
+#, fuzzy, no-c-format
+msgid "&Ask the user"
+msgstr "询问用户(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:469
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to show the "
+"resolution dialog to let the user decide on a case by case basis.</qt>"
+msgstr ""
+
+#: conduits/docconduit/doc-setupdialog.ui:479
+#, fuzzy, no-c-format
+msgid "&Always show the resolution dialog"
+msgstr "即时并不存在冲突也总是显示解决对话框(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:482
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to force the resolution dialog to appear even when there "
+"are no conflicts.</qt>"
+msgstr "即时并不存在冲突也总是显示解决对话框(&A)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:47
+#, fuzzy, no-c-format
+msgid "&PalmDOC file:"
+msgstr "KPalmDOC"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:77
+#, fuzzy, no-c-format
+msgid "Convert whole &folders"
+msgstr "JPilot 插件目录："
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:85
+#, fuzzy, no-c-format
+msgid ""
+"Folder where copies of the handheld databases are kept. You can install them "
+"to any PalmOS handheld, and distribute these copies to other people (but "
+"beware of copyright infringement)."
+msgstr ""
+"存放手持设备数据库副本的目录。您可以将它们安装到任何 PalmOS 手持设备，并且分"
+"发这些副本给其它人(但是要注意版权！)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:93
+#, fuzzy, no-c-format
+msgid "&Ask before overwriting files"
+msgstr "每个冲突项目都询问(&A)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:101
+#, fuzzy, no-c-format
+msgid "&Verbose messages"
+msgstr "日志消息(&L)："
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:109
+#, no-c-format
+msgid "Convert Text to PalmDOC"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:117
+#, no-c-format
+msgid "Convert PalmDOC to Text"
+msgstr ""
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:142
+#, fuzzy, no-c-format
+msgid ""
+"Enter the name of the folder where the text files reside on the PC. All "
+"files with extension .txt will be synced to the handheld."
+msgstr ""
+"请输入 PC 上存放文本文件的目录名。所有扩展名为 .txt 的文件都将被同步到手持设"
+"备。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:236
+#, no-c-format
+msgid ""
+"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be "
+"set at this position, and the text between the <* and the *> will be used as "
+"bookmark name. The <*...*> will be removed from the text."
+msgstr ""
+"当 <* 书签文本 *> 在文本中某处出现时，将在该位置设置一个书签，<* 和 *> 之间的"
+"文本将被用作书签名称。<*...*> 将从文本中去掉。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:247
+#, no-c-format
+msgid ""
+"Tags of the form <bookmarkname> at the end of the text will be used to "
+"search the text for the pattern between the < and >. Whenever \"bookmarkname"
+"\" appears in the text, a bookmark will be set there. The endtags <...> will "
+"then be removed from the end of the text."
+msgstr ""
+"在文本结尾的形如 <书签名称> 的标签将被用于查找 < 和 > 之间的字符串。每当“书签"
+"名称”出现在文本中时，就会在该处设置一个书签。然后结尾标签 <...> 将从文本结尾"
+"去掉。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:264
+#, no-c-format
+msgid ""
+"The Palm doc format supports compressing the text to save memory. If you "
+"check this box, the text will consume about 50% less memory than in "
+"uncompressed state. Almost all DOC readers on the Palm support compressed "
+"texts."
+msgstr ""
+"Palm doc 格式支持压缩文本，从而节省内存。如果您选中此选项，同样的文本会比未压"
+"缩的少用大约 50% 的内存。几乎所有 Palm 上的 DOC 阅读器都支持压缩的文本。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:278
+#, no-c-format
+msgid ""
+"Do you want to convert bookmarks? Most doc readers support bookmarks. You "
+"have to provide some information about where the bookmarks should be set and "
+"their titles. Check at least one of the bookmark types below."
+msgstr ""
+"您要转换书签吗？多数 doc 阅读器支持书签。您需要提供关于在何处设置书签的信息以"
+"及它们的标题。请至少选中一种下面的书签类型。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:289
+#, fuzzy, no-c-format
+msgid ""
+"Use regular expressions in a file textname.bmk (textname.txt is the filename "
+"of the text) to search the text for bookmarks.See the documentation for a "
+"description of the format of the bmk file."
+msgstr ""
+"在文件 textname.bmk 中(textname.txt 是文本文件名)使用正则表达式搜索文本中的书"
+"签。关于 bmk 文件格式的说明请参见文档。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:386
+#, no-c-format
+msgid "Convert as &end tags"
+msgstr "转换为结尾标签(&E)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:394
+#, no-c-format
+msgid "Convert into .bmk &file"
+msgstr "转换为 .bmk 文件(&F)"
+
+#: conduits/knotes/knotesconduit.kcfg:12
+#, no-c-format
+msgid "Suppress the confirmation KNotes normally shows when deleting a note."
+msgstr ""
+
+#: conduits/knotes/knotesconduit.kcfg:17
+#, no-c-format
+msgid "list of the synced MemoDB records"
+msgstr ""
+
+#: conduits/knotes/knotesconduit.kcfg:21
+#, no-c-format
+msgid "list of the corresponding KNotes note IDs"
+msgstr ""
+
+#: conduits/knotes/setup_base.ui:45
+#, no-c-format
+msgid "Delete KNote when Pilot memo is deleted"
+msgstr "当 Pilot 备忘录被删除时删除 KNote"
+
+#: conduits/knotes/setup_base.ui:51
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes automatically "
+"when the corresponding Pilot memo is deleted. Use this option with care, as "
+"the notes you want to keep in the handheld and in the desktop are not "
+"necessarily the same.</qt>"
+msgstr ""
+
+#: conduits/knotes/setup_base.ui:59
+#, no-c-format
+msgid "Suppress delete-confirmation in KNotes"
+msgstr ""
+
+#: conduits/knotes/setup_base.ui:62
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes, without "
+"confirmation, when the corresponding Pilot memo is deleted. Use this option "
+"only if you want to keep the same notes in the handheld and in the PC.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:49
+#, no-c-format
+msgid "Sync"
+msgstr "同步"
+
+#: conduits/malconduit/mal-setup_dialog.ui:52
+#, no-c-format
+msgid "Select how often AvantGo should be synchronised"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:72
+#, no-c-format
+msgid "&Every sync"
+msgstr "每次同步(&E)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:78
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync. "
+"To perform a successful synchronization, you need to have access to the MAL "
+"server during the HotSync.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:86
+#, no-c-format
+msgid "Once per &hour"
+msgstr "每小时一次(&H)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:92
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one hour after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:100
+#, no-c-format
+msgid "Once a &day"
+msgstr "每天一次(&D)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:103
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one day after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:111
+#, no-c-format
+msgid "Once a &week"
+msgstr "每周一次(&W)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:114
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one week after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:122
+#, no-c-format
+msgid "Once a &month"
+msgstr "每月一次(&M)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:125
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one month after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:154
+#, no-c-format
+msgid "Proxy"
+msgstr "代理"
+
+#: conduits/malconduit/mal-setup_dialog.ui:168
+#, fuzzy, no-c-format
+msgid "Proxy Type"
+msgstr "代理"
+
+#: conduits/malconduit/mal-setup_dialog.ui:185
+#, no-c-format
+msgid "&No proxy"
+msgstr "不用代理(&N)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:191
+#, no-c-format
+msgid ""
+"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
+"this option if you connect to the internet directly.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:199
+#, no-c-format
+msgid "&HTTP proxy"
+msgstr "&HTTP 代理"
+
+#: conduits/malconduit/mal-setup_dialog.ui:202
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:210
+#, no-c-format
+msgid "&SOCKS proxy"
+msgstr "&SOCKS 代理"
+
+#: conduits/malconduit/mal-setup_dialog.ui:213
+#, fuzzy, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
+msgstr "<qt>如果你在使用 CSV 文件，请选择“无”</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:226
+#, fuzzy, no-c-format
+msgid "Server Information"
+msgstr "服务器信息"
+
+#: conduits/malconduit/mal-setup_dialog.ui:260
+#: conduits/malconduit/mal-setup_dialog.ui:462
+#, no-c-format
+msgid "Custom &port:"
+msgstr "自定义端口(&P)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:263
+#, no-c-format
+msgid "Check this box to use a non-standard proxy port."
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:271
+#, no-c-format
+msgid "Ser&ver name:"
+msgstr "服务器名称(&V)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:277
+#: conduits/malconduit/mal-setup_dialog.ui:285
+#, no-c-format
+msgid ""
+"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy "
+"server to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar."
+"com</i> or <i>http://foo.bar.com:8080</i>).</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:305
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter the port you want KPilot to use when connecting to your proxy "
+"server here.</qt>"
+msgstr "<qt>在此处输入要添加到您的 Pilot 同步日志文件中的信息。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:316
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your password here.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:324
+#: conduits/malconduit/mal-setup_dialog.ui:349
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your username here.</qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:332
+#: conduits/malconduit/mal-setup_dialog.ui:514
+#, no-c-format
+msgid "&Password:"
+msgstr "口令(&P)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:343
+#: conduits/malconduit/mal-setup_dialog.ui:525
+#, fuzzy, no-c-format
+msgid "&User name:"
+msgstr "用户名(&U)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:371
+#: conduits/malconduit/mal-setup_dialog.ui:385
+#, no-c-format
+msgid ""
+"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
+"separated with commas, e.g: <br><i>localhost,127.0.0.1,.lan</i><qt>"
+msgstr ""
+
+#: conduits/malconduit/mal-setup_dialog.ui:379
+#, fuzzy, no-c-format
+msgid "N&o proxy for:"
+msgstr "不用代理(&N)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:414
+#, no-c-format
+msgid "MAL Server"
+msgstr "MAL 服务器"
+
+#: conduits/malconduit/mal-setup_dialog.ui:434
+#, fuzzy, no-c-format
+msgid "MAL Server Information"
+msgstr "MAL 服务器信息"
+
+#: conduits/malconduit/mal-setup_dialog.ui:451
+#, no-c-format
+msgid "&MAL server name:"
+msgstr "&MAL 服务器名称："
+
+#: conduits/malconduit/mal-setup_dialog.ui:574
+#, fuzzy, no-c-format
+msgid ""
+"<qt>There is currently <b>no way to set server parameters on the desktop</"
+"b>; you need to use the <i>MobileLink</i> or <i>AGConnect</i> application on "
+"the handheld device. </qt>"
+msgstr ""
+"<qt>目前<b>在桌面计算机上没法设置服务器参数</b>：您需要使用手持设备上"
+"的“<i>MobileLink</i>”应用程序。</qt>"
+
+#: conduits/memofileconduit/memofileconduit.kcfg:6
+#, no-c-format
+msgid "What directory do you want to sync your PDA's memos with?"
+msgstr ""
+
+#: conduits/memofileconduit/memofileconduit.kcfg:10
+#, no-c-format
+msgid "Do you want to sync your private records to the filesystem?"
+msgstr ""
+
+#: conduits/memofileconduit/setup_base.ui:33
+#, fuzzy, no-c-format
+msgid "Memofile Conduit Options"
+msgstr "空管道选项"
+
+#: conduits/memofileconduit/setup_base.ui:96
+#, fuzzy, no-c-format
+msgid "Sync private records:"
+msgstr "同步进度："
+
+#: conduits/memofileconduit/setup_base.ui:104
+#, fuzzy, no-c-format
+msgid "Memos directory:"
+msgstr "KPalmDOC"
+
+#: conduits/memofileconduit/setup_base.ui:115
+#, no-c-format
+msgid "Select the directory you want to store your PDA's memos in"
+msgstr ""
+
+#: conduits/notepadconduit/notepad-setup.ui:17
+#, no-c-format
+msgid "Path to the directory to which the pictures should be exported."
+msgstr ""
+
+#: conduits/notepadconduit/notepad-setup.ui:65
+#, fuzzy, no-c-format
+msgid "Output:"
+msgstr "CVS 文件名："
+
+#: conduits/notepadconduit/notepadconduit.kcfg:9
+#, no-c-format
+msgid "The export directory for the notepad drawings"
+msgstr ""
+
+#: conduits/null/nullconduit.kcfg:9 conduits/recordconduit/settings.kcfg:13
+#, no-c-format
+msgid "The error message if the null conduit is supposed to fail"
+msgstr ""
+
+#: conduits/null/setup_base.ui:33 conduits/recordconduit/setup_base.ui:33
+#, no-c-format
+msgid "Null-Conduit Options"
+msgstr "空管道选项"
+
+#: conduits/null/setup_base.ui:85 conduits/recordconduit/setup_base.ui:85
+#, fuzzy, no-c-format
+msgid "KPilot was here."
+msgstr "KPilot 曾在这里！"
+
+#: conduits/null/setup_base.ui:88 conduits/recordconduit/setup_base.ui:88
+#, no-c-format
+msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
+msgstr "<qt>在此处输入要添加到您的 Pilot 同步日志文件中的信息。</qt>"
+
+#: conduits/null/setup_base.ui:96 conduits/recordconduit/setup_base.ui:96
+#, no-c-format
+msgid "&Log message:"
+msgstr "日志消息(&L)："
+
+#: conduits/popmail/popmail.kcfg:9
+#, no-c-format
+msgid "Selects the way in which mail is sent: none (0), kmail (1)."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:13
+#, no-c-format
+msgid "The email address entered in the To: field of outgoing messages."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:17
+#, no-c-format
+msgid "The pathname of your .signature file."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:21
+#, no-c-format
+msgid "The name of KMail's outbox - use with caution."
+msgstr ""
+
+#: conduits/popmail/setup-dialog.ui:34
+#, no-c-format
+msgid "Send Mail"
+msgstr "发送邮件"
+
+#: conduits/popmail/setup-dialog.ui:62
+#, fuzzy, no-c-format
+msgid "Send method:"
+msgstr "发送方式"
+
+#: conduits/popmail/setup-dialog.ui:65 conduits/popmail/setup-dialog.ui:127
+#, no-c-format
+msgid ""
+"<qt>Select the method KPilot will use to send the mail from your Handheld to "
+"the recipients here. Depending on the method you choose, the other fields in "
+"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
+"method is through KMail.</qt>"
+msgstr ""
+
+#: conduits/popmail/setup-dialog.ui:73
+#, fuzzy, no-c-format
+msgid "Email address:"
+msgstr "电子邮件地址："
+
+#: conduits/popmail/setup-dialog.ui:76 conduits/popmail/setup-dialog.ui:87
+#, fuzzy, no-c-format
+msgid "<qt>Enter the email address you want to send messages as here.</qt>"
+msgstr "<qt>从地址簿中删除选中的地址。</qt>"
+
+#: conduits/popmail/setup-dialog.ui:84
+#, no-c-format
+msgid "$USER"
+msgstr ""
+
+#: conduits/popmail/setup-dialog.ui:95
+#, fuzzy, no-c-format
+msgid "Signature file:"
+msgstr "签名档："
+
+#: conduits/popmail/setup-dialog.ui:98 conduits/popmail/setup-dialog.ui:106
+#, no-c-format
+msgid ""
+"<qt>If you want to add a signature file, enter the location of your "
+"signature file (usually, <i>.signature</i>, located in your home folder) "
+"here, or select it clicking the file picker button. The signature file "
+"contains the text that is added to the end of your outgoing mail messages.</"
+"qt>"
+msgstr ""
+
+#: conduits/popmail/setup-dialog.ui:112
+#, fuzzy, no-c-format
+msgid "Do Not Send Mail"
+msgstr "不要发送邮件(&D)"
+
+#: conduits/popmail/setup-dialog.ui:117
+#, fuzzy, no-c-format
+msgid "Use KMail"
+msgstr "使用 &KMail"
+
+#: conduits/recordconduit/settings.kcfg:9
+#, no-c-format
+msgid "Whether the conduit should immediately bail out with an error"
+msgstr ""
+
+#: conduits/recordconduit/settings.kcfg:17
+#, no-c-format
+msgid "Databases that are skipped on sync"
+msgstr ""
+
+#: conduits/recordconduit/setup_base.ui:107
+#, no-c-format
+msgid "&Databases:"
+msgstr "数据库(&D)："
+
+#: conduits/recordconduit/setup_base.ui:118
+#, no-c-format
+msgid ""
+"<qt>The Null-conduit can be attached to several databases, effectively "
+"preventing them from Syncing. Enter the database names here.</qt>"
+msgstr ""
+"<qt>空管道可以被附加给好几个数据库，从而有效地阻止它们同步。请在此处输入数据"
+"库名称。</qt>"
+
+#: conduits/recordconduit/setup_base.ui:143
+#, fuzzy, no-c-format
+msgid "Simulate failure"
+msgstr "模拟失败"
+
+#: conduits/recordconduit/setup_base.ui:146
+#, no-c-format
+msgid "Force the conduit to simulate a failure to perform the HotSync."
+msgstr "强制管道模拟一次失败以执行热同步"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:63
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:77
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking the file picker button, the location "
+"and file name of the output file used to store the handheld's system "
+"information.</qt>"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:71
+#, fuzzy, no-c-format
+msgid "Output &file:"
+msgstr "CVS 文件名："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:85
+#, no-c-format
+msgid "Type of Output"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:96
+#, no-c-format
+msgid "&HTML"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:102
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a HTML "
+"document.</qt>"
+msgstr "<qt>如果你在使用 CSV 文件，请选择“无”</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:110
+#, fuzzy, no-c-format
+msgid "Te&xt file"
+msgstr "CVS 文件名："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:113
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a text "
+"document.</qt>"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:124
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking on the file picker button, the "
+"location of the template to be used if you select the Custom template option."
+"</qt>"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:132
+#, fuzzy, no-c-format
+msgid "&Custom template:"
+msgstr "自定义端口(&P)："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:135
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as defined by a "
+"custom template. Enter the location of the template in the edit box, or "
+"select it clicking on the file picker button.</qt>"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:147
+#, no-c-format
+msgid "Parts Included"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:173
+#, fuzzy, no-c-format
+msgid "Output Type"
+msgstr "CVS 文件名："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:189
+#, no-c-format
+msgid ""
+"<qt>Check on this list the types of information about your system and "
+"handheld you want to display in the output file.</qt>"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:23
+#, no-c-format
+msgid "Debug information (for KPilot developers)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:27
+#, fuzzy, no-c-format
+msgid "Hardware information"
+msgstr "数据库信息"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:31
+#, no-c-format
+msgid "List of databases on handheld (takes long!)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:35
+#, fuzzy, no-c-format
+msgid "Memory information"
+msgstr "系统信息"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:39
+#, no-c-format
+msgid "Number of addresses, todos, events and memos"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:43
+#, fuzzy, no-c-format
+msgid "PalmOS version"
+msgstr "PalmOS 版本"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:47
+#, no-c-format
+msgid "Storage info (SD card, memory stick, ...)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:51
+#, fuzzy, no-c-format
+msgid "Synchronization information"
+msgstr "同步模式："
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:55
+#, fuzzy, no-c-format
+msgid "User information"
+msgstr "数据库信息"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:59
+#, no-c-format
+msgid "Version of KPilot, pilot-link and TDE"
+msgstr ""
+
+#: conduits/timeconduit/time-setup_dialog.ui:63
+#, no-c-format
+msgid "Direction"
+msgstr "方向"
+
+#: conduits/timeconduit/time-setup_dialog.ui:80
+#, no-c-format
+msgid "Set the &handheld time from the time on the PC"
+msgstr "根据 PC 上的时间设置手持设备的时间(&H)"
+
+#: conduits/timeconduit/time-setup_dialog.ui:86
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the PC time on both.</qt>"
+msgstr ""
+
+#: conduits/timeconduit/time-setup_dialog.ui:97
+#, no-c-format
+msgid "Set the &PC time from the time on the handheld"
+msgstr "根据手持设备的时间设置 &PC 的时间"
+
+#: conduits/timeconduit/time-setup_dialog.ui:100
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the handheld time on both.</qt>"
+msgstr ""
+
+#: conduits/timeconduit/time-setup_dialog.ui:110
+#, no-c-format
+msgid ""
+"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so "
+"this conduit will be skipped for handhelds that run either of these "
+"operating systems.</qt>"
+msgstr ""
+"<qt>PalmOS 版本 3.25 和 3.3 不支持设置系统时间，因此，运行这两种操作系统的手"
+"持机将会跳过该管道。</qt>"
+
+#: conduits/vcalconduit/korganizerConduit.ui:31
+#, fuzzy, no-c-format
+msgid "Calendar-Conduit Options"
+msgstr "空管道选项"
+
+#: conduits/vcalconduit/korganizerConduit.ui:105
+#, no-c-format
+msgid "&Standard calendar"
+msgstr ""
+
+#: conduits/vcalconduit/korganizerConduit.ui:108
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the calendar specified by the TDE "
+"calendar settings.</qt>"
+msgstr ""
+
+#: conduits/vcalconduit/korganizerConduit.ui:119
+#, fuzzy, no-c-format
+msgid "Calendar &file:"
+msgstr "日历文件："
+
+#: conduits/vcalconduit/korganizerConduit.ui:122
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific calendar file, instead of the "
+"standard TDE calendar. This file must be in the in the vCalendar or "
+"iCalendar format. Enter the location of this file in the edit box or select "
+"it clicking the file picker button.</qt>"
+msgstr ""
+
+#: conduits/vcalconduit/korganizerConduit.ui:141
+#, no-c-format
+msgid ""
+"<qt>Enter here the location and filename of the calendar file or select it "
+"clicking the file picker button. This file must be in the iCalendar or "
+"vCalendar format.</qt>"
+msgstr ""
+
+#: conduits/vcalconduit/korganizerConduit.ui:151
+#, fuzzy, no-c-format
+msgid "Store &archived records in the TDE calendar"
+msgstr "在 TDE 地址簿中贮存归档记录(&A)"
+
+#: conduits/vcalconduit/korganizerConduit.ui:154
+#, no-c-format
+msgid ""
+"When this box is checked, archived records will still\n"
+"be saved in the calendar on the PC."
+msgstr ""
+
+#: conduits/vcalconduit/korganizerConduit.ui:233
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
+"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
+"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
+"entry on both the PC and handheld. Note that this does <i>not</i> handle "
+"double-scheduling conflicts.</qt>"
+msgstr ""
+
+#: kpilot/dbFlagsEditor_base.ui:32
+#, no-c-format
+msgid "Database &name:"
+msgstr "数据库名称(&N)："
+
+#: kpilot/dbFlagsEditor_base.ui:51
+#, no-c-format
+msgid "&Creator:"
+msgstr "创建者(&C)："
+
+#: kpilot/dbFlagsEditor_base.ui:70
+#, no-c-format
+msgid "&Type:"
+msgstr "类型(&T)："
+
+#: kpilot/dbFlagsEditor_base.ui:97
+#, no-c-format
+msgid "Database Flags"
+msgstr "数据库标志"
+
+#: kpilot/dbFlagsEditor_base.ui:108
+#, no-c-format
+msgid "&Ressource database"
+msgstr "资源数据库(&R)"
+
+#: kpilot/dbFlagsEditor_base.ui:116
+#, no-c-format
+msgid "Rea&d-only"
+msgstr "只读(&D)"
+
+#: kpilot/dbFlagsEditor_base.ui:124
+#, no-c-format
+msgid "Database is &backed up"
+msgstr "数据库已备份(&B)"
+
+#: kpilot/dbFlagsEditor_base.ui:132
+#, no-c-format
+msgid "Copy &protected"
+msgstr ""
+
+#: kpilot/dbFlagsEditor_base.ui:159
+#, no-c-format
+msgid "Misc Flags"
+msgstr ""
+
+#: kpilot/dbFlagsEditor_base.ui:187
+#, no-c-format
+msgid "Reset after &installation"
+msgstr ""
+
+#: kpilot/dbFlagsEditor_base.ui:195
+#, no-c-format
+msgid "E&xclude from sync"
+msgstr "从同步中排除(&X)"
+
+#: kpilot/dbFlagsEditor_base.ui:205
+#, no-c-format
+msgid "Time Stamps"
+msgstr "时间辍"
+
+#: kpilot/dbFlagsEditor_base.ui:224
+#, no-c-format
+msgid "Cr&eation time:"
+msgstr "创建时间(&E)："
+
+#: kpilot/dbFlagsEditor_base.ui:235
+#, no-c-format
+msgid "&Modification time:"
+msgstr "修改时间(&M)："
+
+#: kpilot/dbFlagsEditor_base.ui:246
+#, no-c-format
+msgid "Back&up time:"
+msgstr "备份时间(&U)："
+
+#: kpilot/dbRecordEditor_base.ui:89
+#, no-c-format
+msgid "&Deleted"
+msgstr "已删除(&D)"
+
+#: kpilot/dbRecordEditor_base.ui:97
+#, no-c-format
+msgid "Busy"
+msgstr "忙"
+
+#: kpilot/dbSelection_base.ui:23
+#, no-c-format
+msgid "Database"
+msgstr "数据库"
+
+#: kpilot/dbSelection_base.ui:60
+#, no-c-format
+msgid "&Add"
+msgstr "添加(&A)"
+
+#: kpilot/kpilot.kcfg:10 kpilot/kpilot.kcfg:15 kpilot/kpilot.kcfg:20
+#: kpilot/kpilot.kcfg:26 kpilot/kpilot.kcfg:31 kpilot/kpilot.kcfg:36
+#: kpilot/kpilot.kcfg:41 kpilot/kpilot.kcfg:55 kpilot/kpilot.kcfg:60
+#: kpilot/kpilot.kcfg:65 kpilot/kpilot.kcfg:70 kpilot/kpilot.kcfg:75
+#: kpilot/kpilot.kcfg:82 kpilot/kpilot.kcfg:87 kpilot/kpilot.kcfg:92
+#: kpilot/kpilot.kcfg:100 kpilot/kpilot.kcfg:105 kpilot/kpilot.kcfg:114
+#: kpilot/kpilot.kcfg:127 kpilot/kpilot.kcfg:132 kpilot/kpilot.kcfg:150
+#: kpilot/kpilot.kcfg:158 kpilot/kpilot.kcfg:162 kpilot/kpilot.kcfg:166
+#: kpilot/kpilot.kcfg:174 kpilot/kpilot.kcfg:179
+#, no-c-format
+msgid ""
+"\n"
+"        "
+msgstr ""
+
+#: kpilot/kpilot.kcfg:110
+#, no-c-format
+msgid "Which databases not to backup."
+msgstr ""
+
+#: kpilot/kpilot.kcfg:137
+#, no-c-format
+msgid "Prevent HotSync when screen locked"
+msgstr ""
+
+#: kpilot/kpilot.kcfg:138
+#, no-c-format
+msgid ""
+"Turning this option on prevents syncing\n"
+"\twhen the screen is locked. This is a security measure\n"
+"\tto prevent people from stealing your data through physical\n"
+"\taccess to a Pilot device link to your machine.\n"
+"\tIt doesn't work with screensavers other than TDE, though,\n"
+"\tso you will need to turn it off for other environments."
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:18
+#: kpilot/kpilotConfigDialog_device.ui:18
+#: kpilot/kpilotConfigDialog_startup.ui:19 kpilot/kpilotConfigDialog_sync.ui:18
+#: kpilot/kpilotConfigDialog_viewers.ui:19
+#, no-c-format
+msgid "KPilot Options"
+msgstr "KPilot 选项"
+
+#: kpilot/kpilotConfigDialog_backup.ui:29
+#, no-c-format
+msgid "Backup Frequency"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:54
+#, fuzzy, no-c-format
+msgid "Do &backup:"
+msgstr "备份"
+
+#: kpilot/kpilotConfigDialog_backup.ui:63
+#, fuzzy, no-c-format
+msgid "On every HotSync"
+msgstr "热同步结束\n"
+
+#: kpilot/kpilotConfigDialog_backup.ui:68
+#, no-c-format
+msgid "On request only"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:90
+#, no-c-format
+msgid "Databases"
+msgstr "数据库"
+
+#: kpilot/kpilotConfigDialog_backup.ui:107
+#, fuzzy, no-c-format
+msgid "&No backup:"
+msgstr "备份"
+
+#: kpilot/kpilotConfigDialog_backup.ui:113
+#: kpilot/kpilotConfigDialog_backup.ui:141
+#, no-c-format
+msgid ""
+"<qt><p>Enter the databases types you wish to exclude from the backup "
+"operation here. Use this setting if backing up some databases crashes the "
+"handheld, or if you do not want a backup of some databases (like AvantGo "
+"pages).</p><p>Entries with square brackets [] are <i>creator codes</i> like "
+"<tt>[lnch]</tt> and can exclude a whole range of databases. Entries without "
+"the brackets list database names, and may include shell-style wildcards, "
+"like <tt>*_a68k</tt>.</p></qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:127
+#, fuzzy, no-c-format
+msgid "Not &restored:"
+msgstr "恢复(&R)"
+
+#: kpilot/kpilotConfigDialog_backup.ui:133
+#: kpilot/kpilotConfigDialog_backup.ui:149
+#, no-c-format
+msgid ""
+"<qt><p>Enter the databases types you wish to exclude from the restore "
+"operation here (like AvantGo databases). They will be skipped even if they "
+"exist in the set of backup databases on the handheld. If you still want to "
+"install an ignored database to the handheld, you can always manually install "
+"it to the handheld.</p><p>Entries with square brackets [] are <i>creator "
+"codes</i> like <tt>[lnch]</tt> and can exclude a whole range of databases. "
+"Entries without the brackets list database names, and may include shell-"
+"style wildcards, like <tt>*_a68k</tt>.</p></qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:157
+#: kpilot/kpilotConfigDialog_backup.ui:168
+#, fuzzy, no-c-format
+msgid "..."
+msgstr "&..."
+
+#: kpilot/kpilotConfigDialog_backup.ui:160
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you "
+"to check the databases you want to exclude from the backup from a list.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:171
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you "
+"to select the databases you want to exclude from the restore operation from "
+"a list.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:181
+#, fuzzy, no-c-format
+msgid "Run conduits durin&g a backup sync"
+msgstr "执行管道设置"
+
+#: kpilot/kpilotConfigDialog_backup.ui:184
+#, no-c-format
+msgid ""
+"<qt>Check this box to run the selected conduits before every backup. This "
+"makes sure the backup is up to date with the last changes from your PC.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:29
+#, no-c-format
+msgid "Pilot &device:"
+msgstr "Pilot 设备(&D)："
+
+#: kpilot/kpilotConfigDialog_device.ui:35
+#: kpilot/kpilotConfigDialog_device.ui:43
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
+"the correct device. You need write permission to successfully synchronize "
+"with the handheld.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:51
+#, no-c-format
+msgid "&Speed:"
+msgstr "速度(&S)："
+
+#: kpilot/kpilotConfigDialog_device.ui:57
+#: kpilot/kpilotConfigDialog_device.ui:115
+#, no-c-format
+msgid ""
+"<qt>Select the speed of the serial connection to your handheld here. This "
+"has no meaning for USB devices. For an older model, choose 9600. Newer "
+"models may be able to handle speeds up to the maximum listed, 115200. You "
+"can experiment with the connection speed: the manual suggests starting at a "
+"speed of 19200 and trying faster speeds to see if they work.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:65
+#: kpilot/kpilotConfigDialog_device.ui:143
+#, no-c-format
+msgid ""
+"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting.</qt>"
+msgstr "<qt>在这里输入您的姓名，如 Pilot “拥有者”设置中所显示的那样。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:88
+#, no-c-format
+msgid "9600"
+msgstr "9600"
+
+#: kpilot/kpilotConfigDialog_device.ui:93
+#, no-c-format
+msgid "19200"
+msgstr "19200"
+
+#: kpilot/kpilotConfigDialog_device.ui:98
+#, no-c-format
+msgid "38400"
+msgstr "38400"
+
+#: kpilot/kpilotConfigDialog_device.ui:103
+#, no-c-format
+msgid "57600"
+msgstr "57600"
+
+#: kpilot/kpilotConfigDialog_device.ui:108
+#, no-c-format
+msgid "115200"
+msgstr "115200"
+
+#: kpilot/kpilotConfigDialog_device.ui:123
+#, no-c-format
+msgid "En&coding:"
+msgstr "编码(&C)："
+
+#: kpilot/kpilotConfigDialog_device.ui:129
+#: kpilot/kpilotConfigDialog_device.ui:154
+#, no-c-format
+msgid ""
+"<qt>PalmOS devices are available in many different languages. If your device "
+"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
+"encoding here, in order to display special characters correctly.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:137
+#, no-c-format
+msgid "Pilot &user:"
+msgstr "Pilot 用户(&U)："
+
+#: kpilot/kpilotConfigDialog_device.ui:162
+#, no-c-format
+msgid "&Workarounds:"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:171
+#, no-c-format
+msgid "None"
+msgstr "无"
+
+#: kpilot/kpilotConfigDialog_device.ui:176
+#, no-c-format
+msgid "Zire 31, 72, Tungsten T5"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_device.ui:183
+#, no-c-format
+msgid ""
+"<qt>Workarounds enable special handling for specific devices. Most devices "
+"do not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten "
+"T5 <i>do</i> have special needs, so if you are connecting such a device, "
+"please select the workaround for them.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_startup.ui:33
+#, fuzzy, no-c-format
+msgid "Exit Options"
+msgstr "KPilot 选项"
+
+#: kpilot/kpilotConfigDialog_startup.ui:44
+#, no-c-format
+msgid "S&top KPilot's system tray application on exit"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_startup.ui:47
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
+"KPilot started the daemon itself).</qt>"
+msgstr ""
+"<qt>在退出 KPilot 时停止 KPilot 守护进程(仅在 KPilot 自行启动了该守护进程的情"
+"况下)。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:55
+#, no-c-format
+msgid "Quit &after HotSync"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_startup.ui:58
+#, no-c-format
+msgid ""
+"<qt>Check this box to stop both KPilot and the KPilot daemon after the "
+"HotSync finishes. This may be useful for systems where KPilot is started by "
+"the USB daemon.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_startup.ui:68
+#, no-c-format
+msgid "Startup Options"
+msgstr "启动选项"
+
+#: kpilot/kpilotConfigDialog_startup.ui:79
+#: kpilot/kpilotConfigWizard_user.ui:133
+#, fuzzy, no-c-format
+msgid "&Start KPilot at login"
+msgstr "在登录时启动热同步守护进程(&S)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:82
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to start up the KPilot daemon every time you log in to "
+"TDE.</qt>"
+msgstr "<qt>每次登录 TDE 时都启动 KPilot 守护进程。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:90
+#, fuzzy, no-c-format
+msgid "S&how KPilot in system tray"
+msgstr "在面板中显示守护进程(&H)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:93
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to place a Kpilot icon in the system tray, which shows "
+"the daemon's status, and allows you to select the next sync type and to "
+"configure KPilot.</qt>"
+msgstr ""
+"<qt>把热同步图标放置在系统托盘中，这会显示该守护进程的状态，并允许您配置 "
+"KPilot。</qt>"
+
+#: kpilot/kpilotConfigDialog_sync.ui:32
+#, fuzzy, no-c-format
+msgid "Do full sync when chan&ging PCs"
+msgstr "当改变 PC 时做完整备份(&D)"
+
+#: kpilot/kpilotConfigDialog_sync.ui:38
+#, no-c-format
+msgid ""
+"<qt>Check this box to perform a full sync when your last sync was performed "
+"with another PC or system, to guarantee the completeness of your data.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_sync.ui:44
+#, fuzzy, no-c-format
+msgid "HotSync (sync all changes)"
+msgstr "尽可能做快速同步(&F)"
+
+#: kpilot/kpilotConfigDialog_sync.ui:49
+#, no-c-format
+msgid "FullSync (sync also unchanged records)"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_sync.ui:66
+#, no-c-format
+msgid ""
+"<qt>Select in this list the synchronization type that KPilot will use as "
+"default. Possible values are:<br>\"HotSync\", to run all selected conduits, "
+"and sync the databases with a modified flag set, updating the modified "
+"records only;<br>\"FullSync\" to run all selected conduits, and sync all "
+"databases, reading all records, and performing a full backup;<br>\"Copy PC "
+"to handheld\" to run all conduits and sync all databases, but instead of "
+"merging the information from both sources, copy the PC data to the handheld;"
+"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the handheld data "
+"to the PC.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_sync.ui:74
+#, fuzzy, no-c-format
+msgid "&Default sync:"
+msgstr "DB 专用"
+
+#: kpilot/kpilotConfigDialog_sync.ui:132
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are  "
+"\"Ask User\" to let you decide case by case, \"Do Nothing\" to allow the "
+"entries to be different, \"PC overrides\", \"Handheld overrides\", \"Use "
+"values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld. Note that the conflict resolution option selected "
+"here can be overridden by conduits that have their own conflict resolution "
+"configuration.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_sync.ui:159
+#, no-c-format
+msgid "Do not sync when screensaver is active"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_sync.ui:165
+#, no-c-format
+msgid ""
+"<qt>Check this box to prevent KPilot from syncing your handheld while the "
+"screensaver is active: this is a security measure to prevent others from "
+"syncing <i>their</i> handhelds with your data.  This option must be disabled "
+"when you use a different desktop, since KPilot is not aware of screensavers "
+"other than TDE's.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_viewers.ui:47
+#, no-c-format
+msgid "Make internal viewers &editable"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_viewers.ui:53
+#, no-c-format
+msgid ""
+"<qt>The internal viewers can be read only or editable. The editable mode "
+"allows you to add new records, delete or edit the existing records and sync "
+"your modifications back to the handheld. Check this box to set the internal "
+"viewers to editable mode, uncheck to set them to read only mode.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_viewers.ui:61
+#, no-c-format
+msgid "&Show private records"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_viewers.ui:64
+#, no-c-format
+msgid ""
+"<qt>Check this box to display in the internal viewers records that are "
+"marked &quot;Private&quot; in the Pilot.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_viewers.ui:85
+#, fuzzy, no-c-format
+msgid "Show as \"&Last, first\""
+msgstr "按“姓，名”来显示名字？"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:88
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by last name, first name.</qt>"
+msgstr "<qt>在地址查看器中显示的地址按照“姓，名”排序。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:96
+#, fuzzy, no-c-format
+msgid "Show as \"&Company, last\""
+msgstr "公司，姓氏(&C)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:99
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by company name, last name.</qt>"
+msgstr "<qt>在地址查看器中显示的地址按照“公司，姓氏”排序。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:121
+#, no-c-format
+msgid "&Use key field"
+msgstr "使用关键字段(&U)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:124
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Check this box to combine all entries with the same last name in the "
+"internal address viewer.</qt>"
+msgstr "<qt>合并所有相同姓氏的项目。</qt>"
+
+#: kpilot/kpilotConfigWizard_app.ui:24
+#, no-c-format
+msgid ""
+"Finally, you can configure KPilot specifically for some PIM applications, "
+"like Kontact (TDE's integrated PIM application) or Evolution (GNOME's "
+"integrated PIM application).\n"
+"\n"
+"Press \"Finish\" to setup KPilot according to the settings in this "
+"configuration Wizard."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_app.ui:37
+#, no-c-format
+msgid "Set Default Values for Syncing With"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_app.ui:48
+#, no-c-format
+msgid "&TDE-PIM suite (Kontact)"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_app.ui:59
+#, fuzzy, no-c-format
+msgid "&GNOME-PIM (Evolution)"
+msgstr "不解决(&N)"
+
+#: kpilot/kpilotConfigWizard_app.ui:67
+#, fuzzy, no-c-format
+msgid "No sync, just backup"
+msgstr "只进行备份"
+
+#: kpilot/kpilotConfigWizard_user.ui:24
+#, no-c-format
+msgid "This wizard will help you configure KPilot."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:35
+#, no-c-format
+msgid ""
+"As a first step, we need to determine the user name and how the handheld is "
+"connected to the computer."
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:46
+#, fuzzy, no-c-format
+msgid "Handheld && User Name"
+msgstr "手持设备 ->PC"
+
+#: kpilot/kpilotConfigWizard_user.ui:49
+#, no-c-format
+msgid ""
+"<p>You can either let KPilot detect these values automatically (for this you "
+"need your handheld ready and connected to the PC)  or enter them manually.</"
+"p>\n"
+"<p>Please enter the username exactly as set on the handheld. </p>\n"
+"<p>If setting the device type manually (i.e., if automatic detection did not "
+"work for you), please look below for tips on choosing the right device "
+"name.  {0...n} means a number from 0 up to a very large number, though "
+"usually just 255.\n"
+"<p>\n"
+"Serial Port: an old method of connection, used primarily by the original "
+"line of Palm Pilots, and various Palm-based cellphones.  Device name will "
+"look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"USB Port: A newer style of connection, used by most newer Palms, "
+"Handsprings, and Sony Clies.  Device name will look like /dev/ttyUSB{0...n} "
+"or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD).  On Linux, "
+"definitely check both 0 and 1: newer devices tend to use 1; older devices "
+"tend to use 0.</p>\n"
+"<p>\n"
+"Infrared: (pronounced infra-red) is a relatively slow connection type used "
+"solely as a last resort.  Device name will be /dev/ircomm0 or /dev/ttyS{0..."
+"n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"Bluetooth: A new connection method, this is used almost exclusively on new, "
+"high-end devices, like the Tungsten T3 or the Zire 72.  Device name will be /"
+"dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
+"(FreeBSD).</p>\n"
+"<p>\n"
+"Network: This has not been tested by any of the KPilot developers themselves "
+"(hardware donations always accepted!), but it has been reported that setting "
+"the device to \"net:any\" will work for network-enabled devices.  However, "
+"this has also been known to lock KPilot up when doing anything other than "
+"just syncing. Use it with caution.\n"
+"</p>"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:73
+#, fuzzy, no-c-format
+msgid "&Device:"
+msgstr "设备选项"
+
+#: kpilot/kpilotConfigWizard_user.ui:79 kpilot/kpilotConfigWizard_user.ui:101
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
+"the correct device. Use the button below to automatically detect the device. "
+"You need write permission to successfully synchronize with the handheld.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:87
+#, fuzzy, no-c-format
+msgid "&Automatically Detect Handheld && User Name"
+msgstr "手持设备 ->PC"
+
+#: kpilot/kpilotConfigWizard_user.ui:90
+#, no-c-format
+msgid ""
+"<qt>Click this button to open the detection dialog. The wizard will try to "
+"automatically find and display the correct device and username for your "
+"handheld. If the wizard cannot retrieve this information, check if you have "
+"write permission for the device.</qt>"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:98
+#, no-c-format
+msgid "/dev/pilot"
+msgstr ""
+
+#: kpilot/kpilotConfigWizard_user.ui:109 kpilot/kpilotConfigWizard_user.ui:123
+#, fuzzy, no-c-format
+msgid ""
+"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting, or use the button below to automatically detect it.</qt>"
+msgstr "<qt>在这里输入您的姓名，如 Pilot “拥有者”设置中所显示的那样。</qt>"
+
+#: kpilot/kpilotConfigWizard_user.ui:117
+#, fuzzy, no-c-format
+msgid "User na&me:"
+msgstr "用户名(&U)："
+
+#: kpilot/kpilotConfigWizard_user.ui:139
+#, no-c-format
+msgid ""
+"<qt>Check this box to make the kpilot daemon load when you first log in "
+"until you log out.  That means (in theory), that you should not have to do "
+"anything other than connect your handheld and push \"sync\", and kpilot will "
+"appear and magically do your bidding. </qt>"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:32
+#, fuzzy, no-c-format
+msgid "&Description:"
+msgstr "描述"
+
+#: kpilot/todoEditor_base.ui:54
+#, fuzzy, no-c-format
+msgid "&Note:"
+msgstr "无(&N)"
+
+#: kpilot/todoEditor_base.ui:71
+#, fuzzy, no-c-format
+msgid "Ca&tegory:"
+msgstr "类别："
+
+#: kpilot/todoEditor_base.ui:90
+#, no-c-format
+msgid "&Priority:"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:104
+#, no-c-format
+msgid "2"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:109
+#, no-c-format
+msgid "3"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:114
+#, no-c-format
+msgid "4"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:119
+#, no-c-format
+msgid "5"
+msgstr ""
+
+#: kpilot/todoEditor_base.ui:147
+#, fuzzy, no-c-format
+msgid "&Completed"
+msgstr "压缩(&C)"
+
+#: kpilot/todoEditor_base.ui:155
+#, no-c-format
+msgid "Has &end date:"
+msgstr ""
+
+#, fuzzy
+#~ msgid "&Delete"
+#~ msgstr "已删除(&D)"
+
+#, fuzzy
+#~ msgid "Configuration"
+#~ msgstr "配置向导"
+
+#, fuzzy
+#~ msgid "&Settings"
+#~ msgstr "插件设置"
+
+#~ msgid "Cannot open database"
+#~ msgstr "无法打开数据库"
+
+#~ msgid "Pilot database error"
+#~ msgstr "Pilot 数据库错误"
+
+#~ msgid "Cannot create database %1 on the handheld"
+#~ msgstr "无法在手持设备上创建数据库 %1"
+
+#~ msgid "Device link ready."
+#~ msgstr "设备连接就绪。"
+
+#~ msgid "(empty)"
+#~ msgstr "(空)"
+
+#~ msgid "%1 deleted from filesystem. "
+#~ msgstr "%1 已从文件系统中删除。"
+
+#~ msgid "%1 deleted from Palm. "
+#~ msgstr "%1 已从 Palm 上删除。"
+
+#~ msgid ""
+#~ "No DCOP connection could be made. The conduit cannot function without "
+#~ "DCOP."
+#~ msgstr "无法进行任何 DCOP 连接。没有 DCOP 该管道没有这项功能。"
+
+#~ msgid ""
+#~ "KNotes is not running. The conduit must be able to make a DCOP connection "
+#~ "to KNotes for synchronization to take place. Please start KNotes and try "
+#~ "again."
+#~ msgstr ""
+#~ "KNotes 没在运行。管道必须具备与 KNotes 进行 DCOP 连接的能力才能同步。请启"
+#~ "动 KNotes 后重试。"
+
+#~ msgid "Cannot create local backup."
+#~ msgstr "无法创建本地备份。"
+
+#~ msgid "Creating local backup of databases in %1."
+#~ msgstr "在 %1 中创建数据库的本地备份。"
+
+#~ msgid "Creating local backup .."
+#~ msgstr "正在创建本地备份..."
+
+#~ msgid "FastSync"
+#~ msgstr "快速同步"
+
+#~ msgid "Exiting on cancel. All data not restored."
+#~ msgstr "因取消正在退出。没有恢复任何数据。"
+
+#~ msgid "Perl"
+#~ msgstr "Perl"
+
+#~ msgid "Perl returned %1."
+#~ msgstr "Perl 返回了 %1。"
+
+#~ msgid "No value"
+#~ msgstr "无值"
+
+#~ msgid "Python"
+#~ msgstr "Python"
+
+#~ msgid "Python returned %1."
+#~ msgstr "Python 返回了 %1。"
+
+#~ msgid "Python Conduit for KPilot"
+#~ msgstr "KPilot 的 Python 管道"
+
+#~ msgid "Configures the Python Conduit for KPilot"
+#~ msgstr "配置 KPilot 的 Python 管道"
+
+#~ msgid "Copying records to PC ..."
+#~ msgstr "正在将记录复制到 PC..."
+
+#~ msgid "Cannot open file `%1' for restore."
+#~ msgstr "无法打开文件“%1”进行恢复。"
+
+#~ msgid "&FastSync"
+#~ msgstr "快速同步(&F)"
+
+#, fuzzy
+#~ msgid "Next HotSync will be a FastSync."
+#~ msgstr "只进行备份"
+
+#, fuzzy
+#~ msgid ""
+#~ "Tell the daemon that the next HotSync should be a FastSync (run conduits "
+#~ "only)."
+#~ msgstr "PC 同步到手持设备并且手持设备同步到 PC"
+
+#~ msgid "Backup instead of list DBs"
+#~ msgstr "备份而不是列出 DB"
+
+#~ msgid "List available conduits"
+#~ msgstr "列出可用的管道"
+
+#~ msgid "Reset"
+#~ msgstr "重置"
+
+#, fuzzy
+#~ msgid "Perl-Conduit Options"
+#~ msgstr "空管道选项"
+
+#, fuzzy
+#~ msgid "Python-Conduit Options"
+#~ msgstr "空管道选项"
+
+#, fuzzy
+#~ msgid "ConfigWizard_base3"
+#~ msgstr "配置向导"
+
+#, fuzzy
+#~ msgid "Export..."
+#~ msgstr "导出备忘录"
+
+#~ msgid "Using %1 time zone: %2"
+#~ msgstr "使用 %1 时区：%2"
+
+#~ msgid "non-local"
+#~ msgstr "非本地"
+
+#~ msgid "local"
+#~ msgstr "本地"
+
+#, fuzzy
+#~ msgid ""
+#~ "The following item was modified both on the Pilot and on your PC:\n"
+#~ "PC entry:\n"
+#~ "\t%1\n"
+#~ "Handheld entry:\n"
+#~ "\t%2\n"
+#~ "\n"
+#~ "Shall the entry from the handheld overwrite the PC entry? If you select "
+#~ "\"No\", the PC entry will overwrite the Pilot entry."
+#~ msgstr ""
+#~ "\n"
+#~ "\n"
+#~ "应该让 Pilot 上的项目覆盖 PC 上的项目吗？如果您选择“否”，PC 上的项目将会覆"
+#~ "盖 Pilot 上的项目。"
+
+#, fuzzy
+#~ msgid "&General"
+#~ msgstr "常规"
+
+#, fuzzy
+#~ msgid "C&onflicts"
+#~ msgstr "冲突"
+
+#~ msgid "Unknown sync mode"
+#~ msgstr "未知的同步模式"
+
+#~ msgid "Conduit flags: "
+#~ msgstr "管道标志："
+
+#~ msgid "No memos were added."
+#~ msgstr "未添加备忘录。"