Copy translations to a new directory layout.

Use common rules for build and install translations.
Use common rules for build and install documentation.
Added translation of .desktop files.

Signed-off-by: Slávek Banko <[email protected]>

1 files changed, 6083 insertions, 0 deletions

diff --git a/translations/messages/zh_TW.po b/translations/messages/zh_TW.po
new file mode 100644
index 0000000..cd7ba3f
--- /dev/null
+++ b/translations/messages/zh_TW.po
@@ -0,0 +1,6083 @@
+# translation of kpilot.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: kpilot\n"
+"POT-Creation-Date: 2021-07-07 18:32+0000\n"
+"PO-Revision-Date: 2007-04-18 12:36+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <[email protected]>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
+#: conduits/malconduit/mal-factory.cpp:70
+msgid "MAL Synchronization Conduit for KPilot"
+msgstr "KPilot MAL 同步導管"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
+#: conduits/malconduit/mal-factory.cpp:72
+msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
+msgstr "將 MAL 伺服器（如 AvantGo）上的內容同步到掌上型裝置"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
+#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
+#: conduits/memofileconduit/memofile-factory.cpp:69
+#: conduits/notepadconduit/notepad-factory.cpp:73
+#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
+#: conduits/timeconduit/time-setup.cpp:54
+msgid "Primary Author"
+msgstr "主要作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
+#: conduits/malconduit/mal-factory.cpp:78
+msgid "Author of libmal and the JPilot AvantGo conduit"
+msgstr "libmal 與 JPilot AvantGo 導管的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
+#: conduits/malconduit/mal-factory.cpp:80
+msgid "Author of syncmal"
+msgstr "syncmal 的作者"
+
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
+#: conduits/malconduit/mal-factory.cpp:82
+msgid "Authors of the malsync library (c) 1997-1999"
+msgstr "malsync 函式庫 (c) 1997-1999 的作者"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
+msgid "Addressbook"
+msgstr "通訊錄"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:298
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened. Please make "
+"sure to supply a valid file name in the conduit's configuration dialog. "
+"Aborting the conduit."
+msgstr ""
+"您選擇與檔案 %1 同步，但是檔案無法開啟。請確定您在導管設定中所給的是正確的檔"
+"名。將中止此導管。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
+msgid "Unable to initialize and load the addressbook for the sync."
+msgstr "同步時無法初始化並載入通訊錄。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
+msgid "Unable to lock addressbook for writing.  Can't sync!"
+msgstr "寫入時無法鎖定通訊錄。無法同步！"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the "
+"temporary local file \"%2\" manually"
+msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
+msgid "Unable to open the addressbook databases on the handheld."
+msgstr "無法開啟掌上型裝置上的通訊錄資料庫。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
+msgid "Unable to open the addressbook."
+msgstr "無法開啟通訊錄。"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
+msgid "Item on PC"
+msgstr "PC 上的項目"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
+msgid "Handheld"
+msgstr "掌上型裝置"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
+msgid "Last sync"
+msgstr "最後一次同步"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
+msgid "Last name"
+msgstr "姓"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
+msgid "First name"
+msgstr "名"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
+msgid "Organization"
+msgstr "組織"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
+msgid "Title"
+msgstr "標題"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
+msgid "Note"
+msgstr "附註"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
+msgid "Custom 1"
+msgstr "自訂 1"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
+msgid "Custom 2"
+msgstr "自訂 2"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
+msgid "Custom 3"
+msgstr "自訂 3"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
+msgid "Custom 4"
+msgstr "自訂 4"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
+msgid "Work Phone"
+msgstr "工作電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
+msgid "Home Phone"
+msgstr "住家電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
+msgid "Mobile Phone"
+msgstr "行動電話"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
+msgid "Fax"
+msgstr "傳真"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
+msgid "Pager"
+msgstr "呼叫器"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
+msgid "Other"
+msgstr "其他"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
+msgid "Email"
+msgstr "電子郵件地址"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
+msgid "Address"
+msgstr "地址"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
+msgid "City"
+msgstr "城市"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
+msgid "Region"
+msgstr "區域"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
+msgid "Postal code"
+msgstr "郵遞區號"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
+msgid "Country"
+msgstr "國家"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
+msgid "Category"
+msgstr "類別"
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
+msgid ""
+"The following address entry was changed, but does no longer exist on the "
+"handheld. Please resolve this conflict:"
+msgstr "底下的通訊錄項目已變更，但是掌上型裝置中已不存在。請先解決這個問題："
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
+msgid ""
+"The following address entry was changed, but does no longer exist on the PC. "
+"Please resolve this conflict:"
+msgstr "底下的通訊錄項目已變更，但是 PC 中已不存在。請先解決這個問題："
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
+msgid ""
+"The following address entry was changed on the handheld as well as on the PC "
+"side. The changes could not be merged automatically, so please resolve the "
+"conflict yourself:"
+msgstr ""
+"底下的通訊錄項目已同時在 PC 與掌上型裝置中變更，但是兩者的變更無法自動合併。"
+"請先解決這個問題："
+
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
+msgid "Address conflict"
+msgstr "通訊錄項目衝突"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
+msgid "Abbrowser Conduit for KPilot"
+msgstr "KPilot 的 Abbrowser 導管"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
+msgid "Configures the Abbrowser Conduit for KPilot"
+msgstr "設定 KPilot 的 Abbrowser 導管（Abbrowser Conduit）"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
+#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
+#: conduits/vcalconduit/todo-setup.cpp:59
+#: conduits/vcalconduit/todo-setup.cpp:63
+#: conduits/vcalconduit/vcal-setup.cpp:50
+#: conduits/vcalconduit/vcal-setup.cpp:54 kpilot/kpilot.cpp:1027
+#: kpilot/pilotDaemon.cpp:1323
+msgid "Maintainer"
+msgstr "維護者"
+
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
+#: conduits/knotes/knotes-factory.cpp:77
+msgid "UI"
+msgstr "使用者介面"
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:162
+msgid ""
+"_: Entries in the resolution dialog. First the name of the field, then the "
+"entry from the Handheld or PC after the colon\n"
+"%1: %2"
+msgstr "%1：%2"
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:164
+msgid ""
+"_: Denoting newlines in Address entries. No need to translate\n"
+" | "
+msgstr " | "
+
+#: conduits/abbrowserconduit/resolutionDialog.cpp:214
+#: conduits/abbrowserconduit/resolutionDialog.cpp:220
+msgid "Delete entry"
+msgstr "刪除項目"
+
+#: conduits/docconduit/DOC-converter.cpp:198
+msgid "Unable to open text file %1 for reading."
+msgstr "無法開啟文字檔 %1 以讀取。"
+
+#: conduits/docconduit/DOC-converter.cpp:383
+msgid "Unable to open Database for writing"
+msgstr "無法開啟資料庫以寫入"
+
+#: conduits/docconduit/DOC-converter.cpp:440
+#, c-format
+msgid "Unable to open palm doc database %1"
+msgstr "無法開啟 palm doc 資料庫 %1"
+
+#: conduits/docconduit/DOC-converter.cpp:510
+msgid "No filename set for the conversion"
+msgstr "轉換時未設定檔案名稱"
+
+#: conduits/docconduit/DOC-converter.cpp:515
+msgid "Unable to open Database for reading"
+msgstr "無法開啟資料庫以讀取"
+
+#: conduits/docconduit/DOC-converter.cpp:523
+#, c-format
+msgid "Unable to read database header for database %1."
+msgstr "無法讀取資料庫 %1 的資料庫標頭。"
+
+#: conduits/docconduit/DOC-converter.cpp:543
+#, c-format
+msgid "Unable to open output file %1."
+msgstr "無法開啟輸出檔 %1。"
+
+#: conduits/docconduit/DOC-converter.cpp:558
+msgid "Could not read text record #%1 from Database %2"
+msgstr "無法從資料庫 %2 讀取文字紀錄 #%1"
+
+#: conduits/docconduit/DOC-converter.cpp:577
+msgid "Could not read bookmark record #%1 from Database %2"
+msgstr "無法從資料庫 %2 讀取書籤紀錄 #%1"
+
+#: conduits/docconduit/DOC-converter.cpp:594
+msgid "Unable to open file %1 for the bookmarks of %2."
+msgstr "無法為 %2 的書籤開啟檔案 %1。"
+
+#: conduits/docconduit/doc-conduit.cpp:84
+msgid "DOC"
+msgstr "DOC"
+
+#: conduits/docconduit/doc-conduit.cpp:272
+msgid "Searching for texts and databases to synchronize"
+msgstr "搜尋要同步的文字與資料庫"
+
+#: conduits/docconduit/doc-conduit.cpp:332
+msgid "Database created."
+msgstr "資料庫已建立。"
+
+#: conduits/docconduit/doc-conduit.cpp:380
+msgid "Unable to install the locally created PalmDOC %1 to the handheld."
+msgstr "無法安裝本地端建立的 PalmDOC %1 到掌上型裝置。"
+
+#: conduits/docconduit/doc-conduit.cpp:383
+msgid "Conversion of PalmDOC \"%1\" failed."
+msgstr "轉換 PalmDOC %1 失敗。"
+
+#: conduits/docconduit/doc-conduit.cpp:391
+#, c-format
+msgid "Unable to open or create the database %1."
+msgstr "無法開啟或建立資料庫 %1。"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:147
+#: conduits/docconduit/doc-conduit.cpp:625
+#: conduits/docconduit/doc-setupdialog.ui:401
+#, no-c-format
+msgid "Conflict Resolution"
+msgstr "解決衝突"
+
+#: conduits/docconduit/doc-conduit.cpp:630
+msgid "Sync aborted by user."
+msgstr "使用者已取消同步。"
+
+#: conduits/docconduit/doc-conduit.cpp:668
+msgid "Synchronizing text \"%1\""
+msgstr "同步文字 %1 中"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:53
+msgid ""
+"Here is a list of all text files and DOC databases the conduit found. The "
+"conduit tried to determine the correct sync direction, but for databases in "
+"bold red letters a conflict occurred (i.e. the text was changed both on the "
+"desktop and on the handheld). For these databases please specify which "
+"version is the current one."
+msgstr ""
+"這裡是導管所找到的所有文字檔與 DOC 資料庫的清單。導管曾經試著決定正確的同步方"
+"向，但是以粗紅字母標出的資料庫中出現衝突（也就是文字內容在兩邊都做了變更）。"
+"請指定這些發生衝突的資料庫，要以哪個版本為主。"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:57
+msgid ""
+"You can also change the sync direction for databases without a conflict."
+msgstr "您也可以對未發生衝突的資料庫來改變同步的方向。"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:61
+msgid "DOC Databases"
+msgstr "DOC 資料庫"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:106
+msgid "No Sync"
+msgstr "未同步"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:107
+msgid "Sync Handheld to PC"
+msgstr "從掌上型裝置同步到 PC"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:108
+msgid "Sync PC to Handheld"
+msgstr "從 PC 同步到掌上型裝置"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:109
+msgid "Delete Both Databases"
+msgstr "刪除兩邊的資料庫"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:113
+msgid "More Info..."
+msgstr "更多資訊..."
+
+#: conduits/docconduit/doc-conflictdialog.cpp:155
+msgid "unchanged"
+msgstr "未變更"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:156
+msgid "new"
+msgstr "新的"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:157
+msgid "changed"
+msgstr "已變更"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:158
+msgid "only bookmarks changed"
+msgstr "只變更書籤"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:159
+msgid "deleted"
+msgstr "已刪除"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:160
+msgid "does not exist"
+msgstr "不存在"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
+msgid "unknown"
+msgstr "未知"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:171
+msgid ""
+"Status of the database %1:\n"
+"\n"
+msgstr ""
+"資料庫 %1 的狀態：\n"
+"\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:172
+msgid "Handheld: %1\n"
+msgstr "掌上型裝置：%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:173
+msgid "Desktop: %1\n"
+msgstr "桌面：%1\n"
+
+#: conduits/docconduit/doc-conflictdialog.cpp:175
+msgid "Database information"
+msgstr "資料庫資訊"
+
+#: conduits/docconduit/doc-conflictdialog.h:60
+msgid "Resolution Dialog"
+msgstr ""
+
+#: conduits/docconduit/doc-factory.cpp:63
+msgid "Palm DOC Conduit for KPilot"
+msgstr "KPilot 的 Palm DOC 導管"
+
+#: conduits/docconduit/doc-factory.cpp:64
+msgid "Configures the DOC Conduit for KPilot"
+msgstr "設定 KPilot 的 Palm DOC 導管"
+
+#: conduits/docconduit/doc-setup.cpp:64
+msgid "Palm DOC"
+msgstr "Palm DOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:42
+msgid "KPalmDOC"
+msgstr "KPalmDOC"
+
+#: conduits/docconduit/kpalmdoc.cpp:45
+msgid "Main Developer"
+msgstr "主要開發者"
+
+#: conduits/docconduit/kpalmdoc.cpp:47
+msgid "Maintainer of KPilot"
+msgstr "KPilot 維護者"
+
+#: conduits/docconduit/kpalmdoc.cpp:54
+msgid "PalmDOC Converter"
+msgstr "PalmDOC 轉換器"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:178
+#: conduits/docconduit/kpalmdoc_dlg.cpp:214
+#: conduits/docconduit/kpalmdoc_dlg.cpp:327
+#: conduits/docconduit/kpalmdoc_dlg.cpp:352
+msgid ""
+"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
+"<br>Use folder <em>%2</em> instead?</qt>"
+msgstr ""
+"<qt>您選擇要同步資料夾，但是給了一個檔案（<em>%1</em>）。<br> 要改用資料夾 "
+"<em>%2</em> 嗎？</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:181
+#: conduits/docconduit/kpalmdoc_dlg.cpp:217
+#: conduits/docconduit/kpalmdoc_dlg.cpp:330
+#: conduits/docconduit/kpalmdoc_dlg.cpp:356
+msgid "Use Folder"
+msgstr "使用資料夾"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:194
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"folder.</qt>"
+msgstr ""
+"<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:203
+msgid ""
+"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
+"directory.</qt>"
+msgstr "<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的目錄。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:231
+msgid ""
+"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
+msgstr "<qt>無法建立文字檔使用的資料夾 <em>%1</em>。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:254
+#: conduits/docconduit/kpalmdoc_dlg.cpp:392
+msgid "The following texts were successfully converted:"
+msgstr "底下的文字已成功轉換："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:255
+#: conduits/docconduit/kpalmdoc_dlg.cpp:393
+msgid "Conversion Successful"
+msgstr "轉換成功"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:259
+#: conduits/docconduit/kpalmdoc_dlg.cpp:397
+msgid "No text files were converted correctly"
+msgstr "沒有正確轉換任何文字檔"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:269
+#: conduits/docconduit/kpalmdoc_dlg.cpp:407
+msgid "<qt>The file <em>%1</em> does not exist.</qt>"
+msgstr "<qt>檔案 <em>%1</em> 不存在。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:285
+#: conduits/docconduit/kpalmdoc_dlg.cpp:415
+msgid "Conversion of file %1 successful."
+msgstr "檔案 %1 轉換成功。"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:342
+msgid ""
+"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
+msgstr "<qt>文字檔使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:369
+msgid ""
+"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
+msgstr "<qt>無法建立 PalmDOC 檔使用的資料夾 <em>%1</em>。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:437
+msgid "&Text folder:"
+msgstr "文字資料夾(&T)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:438
+msgid "&PalmDOC folder:"
+msgstr "PalmDOC 資料夾(&P)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:442
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:66
+#, no-c-format
+msgid "&Text file:"
+msgstr "文字檔(&T)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:443
+msgid "&DOC file:"
+msgstr "DOC 檔案(&D)："
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:458
+msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr "<qt>資料庫檔案 <em>%1</em> 已存在。要覆寫嗎？</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:459
+#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
+#: kpilot/logWidget.cpp:343
+msgid "Overwrite"
+msgstr "覆寫"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:484
+#: conduits/docconduit/kpalmdoc_dlg.cpp:520
+msgid "<qt>Error while converting the text %1.</qt>"
+msgstr "<qt>轉換文字 %1 時發生錯誤。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlg.cpp:503
+msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
+msgstr "<qt>文字檔案 <em>%1</em> 已存在。要覆寫嗎？</qt>"
+
+#: conduits/knotes/knotes-action.cpp:232
+msgid "Could not open MemoDB on the handheld."
+msgstr "無法開啟掌上型裝置的備忘錄資料庫。"
+
+#: conduits/knotes/knotes-action.cpp:272
+#, c-format
+msgid "Could not load the resource at: %1"
+msgstr "無法載入在 %1 的資源。"
+
+#: conduits/knotes/knotes-action.cpp:808
+#, c-format
+msgid ""
+"_n: Added one new memo.\n"
+"Added %n new memos."
+msgstr "已新增 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cpp:814
+#, c-format
+msgid ""
+"_n: Modified one memo.\n"
+"Modified %n memos."
+msgstr "已變更 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cpp:821
+#, c-format
+msgid ""
+"_n: Deleted one memo.\n"
+"Deleted %n memos."
+msgstr "已刪除 %n 個備忘。"
+
+#: conduits/knotes/knotes-action.cpp:827
+#, c-format
+msgid ""
+"_n: Added one note to KNotes.\n"
+"Added %n notes to KNotes."
+msgstr "已新增 %n 張便條到 KNotes。"
+
+#: conduits/knotes/knotes-action.cpp:833
+#, c-format
+msgid ""
+"_n: Modified one note in KNotes.\n"
+"Modified %n notes in KNotes."
+msgstr "已變更 KNotes 中的 %n 張便條。"
+
+#: conduits/knotes/knotes-action.cpp:839
+#, c-format
+msgid ""
+"_n: Deleted one note from KNotes.\n"
+"Deleted %n notes from KNotes."
+msgstr "已刪除 KNotes 中的 %n 張便條。"
+
+#: conduits/knotes/knotes-action.cpp:844
+msgid "No change to KNotes."
+msgstr "未改變 KNotes。"
+
+#: conduits/knotes/knotes-factory.cpp:67
+msgid "KNotes Conduit for KPilot"
+msgstr "KPilot 的 KNotes 導管"
+
+#: conduits/knotes/knotes-factory.cpp:69
+msgid "Configures the KNotes Conduit for KPilot"
+msgstr "設定 KPilot 的 KNotes 導管（KNotes Conduit）"
+
+#: conduits/knotes/knotes-setup.cpp:59
+msgid "KNotes"
+msgstr "KNotes"
+
+#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
+msgid "MAL"
+msgstr "MAL"
+
+#: conduits/malconduit/mal-conduit.cpp:193
+msgid ""
+"Skipping MAL sync, because last synchronization was not long enough ago."
+msgstr "略過 MAL 同步，因為離上次同步還不夠久。"
+
+#: conduits/malconduit/mal-conduit.cpp:202
+msgid "MAL synchronization failed (no SyncInfo)."
+msgstr "MAL 同步失敗（沒有同步資訊）。"
+
+#: conduits/malconduit/mal-conduit.cpp:217
+msgid "No proxy server is set."
+msgstr "沒有設定代理伺服器。"
+
+#: conduits/malconduit/mal-conduit.cpp:220
+#, c-format
+msgid "Using proxy server: %1"
+msgstr "使用代理伺服器：%1"
+
+#: conduits/malconduit/mal-conduit.cpp:259
+msgid "No SOCKS proxy is set."
+msgstr "沒有設定 SOCKS 代理伺服器。"
+
+#: conduits/malconduit/mal-conduit.cpp:262
+#, c-format
+msgid "Using SOCKS proxy: %1"
+msgstr "使用 SOCKS 代理伺服器：%1"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:70
+#: conduits/memofileconduit/memofile-factory.cpp:61
+msgid "Memofile"
+msgstr "備忘檔"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:101
+msgid "Unable to open the memo databases on the handheld."
+msgstr "無法在掌上型裝置開啟備忘資料庫。"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:109
+msgid "Cannot initialize from pilot."
+msgstr "無法從 pilot 初始化。"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:116
+msgid "Cannot initialize the memo files from disk."
+msgstr "無法從磁碟初始化備忘檔。"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:123
+#, c-format
+msgid " Syncing with %1."
+msgstr "與 %1 同步中"
+
+#: conduits/memofileconduit/memofile-conduit.cpp:126
+msgid " Copying Pilot to PC..."
+msgstr "從 Pilot 複製到 PC..."
+
+#: conduits/memofileconduit/memofile-conduit.cpp:131
+msgid " Copying PC to Pilot..."
+msgstr "從 PC 複製到 Pilot..."
+
+#: conduits/memofileconduit/memofile-conduit.cpp:135
+msgid " Doing regular sync..."
+msgstr "執行正規同步作業中..."
+
+#: conduits/memofileconduit/memofile-factory.cpp:63
+msgid "Memofile Conduit for KPilot"
+msgstr "KPilot 備忘導管"
+
+#: conduits/memofileconduit/memofile-factory.cpp:65
+msgid "Configures the Memofile Conduit for KPilot"
+msgstr "設定 KPilot 的備忘導管（Memofile Conduit）"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:59
+#: conduits/notepadconduit/notepad-factory.cpp:89
+msgid "Notepad"
+msgstr "記事本"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
+#, c-format
+msgid "Unable to open %1"
+msgstr "無法開啟 %1"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:105
+#, c-format
+msgid ""
+"_n: 1 notepad could not be saved\n"
+"%n notepads could not be saved"
+msgstr "無法儲存 %n 個記事本"
+
+#: conduits/notepadconduit/notepad-conduit.cpp:106
+#, c-format
+msgid ""
+"_n: 1 notepad saved\n"
+"%n notepads saved"
+msgstr "已儲存 %n 個記事本"
+
+#: conduits/notepadconduit/notepad-factory.cpp:67
+msgid "Saves notepads to png files"
+msgstr "將記事本存成 png 檔"
+
+#: conduits/notepadconduit/notepad-factory.cpp:69
+msgid "Configures the Notepad Conduit for KPilot"
+msgstr "設定 KPilot 的記事本導管（Notepad Conduit）"
+
+#: conduits/notepadconduit/notepad-factory.cpp:78
+msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
+msgstr ""
+"記事本導管是以 Angus 的 read-notepad 為基礎開發出來的。它是 pilot-link 的一部"
+"份"
+
+#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
+msgid "Null"
+msgstr "虛擬"
+
+#: conduits/null/null-conduit.cpp:81
+msgid "NULL conduit is programmed to fail."
+msgstr "寫入虛擬導管失敗。"
+
+#: conduits/null/null-factory.cpp:65
+msgid "Null Conduit for KPilot"
+msgstr "KPilot 的虛擬導管"
+
+#: conduits/null/null-factory.cpp:67
+msgid "Configures the Null Conduit for KPilot"
+msgstr "設定 KPilot 的虛擬導管（Null Conduit）"
+
+#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
+msgid "KMail"
+msgstr "KMail"
+
+#: conduits/popmail/popmail-conduit.cpp:118
+#, c-format
+msgid ""
+"_n: Sent one message\n"
+"Sent %n messages"
+msgstr "已傳送 %n 封信件"
+
+#: conduits/popmail/popmail-conduit.cpp:138
+msgid "No mail was sent."
+msgstr "沒有送出任何信件"
+
+#: conduits/popmail/popmail-conduit.cpp:145
+msgid "No mail could be sent."
+msgstr "沒有可傳送的信件。"
+
+#: conduits/popmail/popmail-conduit.cpp:195
+msgid "Could not connect to DCOP server for the KMail connection."
+msgstr "無法連接 DCOP 伺服器以建立與 KMail 的連線。"
+
+#: conduits/popmail/popmail-conduit.cpp:197
+#: conduits/popmail/popmail-conduit.cpp:232
+#: conduits/popmail/popmail-conduit.cpp:245
+#: conduits/popmail/popmail-conduit.cpp:273
+msgid "Error Sending Mail"
+msgstr "傳送郵件時發生錯誤"
+
+#: conduits/popmail/popmail-conduit.cpp:230
+#: conduits/popmail/popmail-conduit.cpp:243
+msgid "Cannot open temporary file to store mail from Pilot in."
+msgstr "無法開啟暫存檔以傳送從 Pilot 送來的信件。"
+
+#: conduits/popmail/popmail-conduit.cpp:272
+msgid "DCOP connection with KMail failed."
+msgstr "與 KMail 的 DCOP 連線失敗。"
+
+#: conduits/popmail/popmail-conduit.cpp:397
+msgid "Cannot perform backup of mail database"
+msgstr "無法備份信件資料庫"
+
+#: conduits/popmail/popmail-conduit.cpp:405
+msgid "Unable to open mail database on handheld"
+msgstr "無法在掌上型裝置上開啟信件資料庫"
+
+#: conduits/popmail/setupDialog.cpp:68
+msgid "Mail Conduit for KPilot"
+msgstr "KPilot 的 Mail 導管"
+
+#: conduits/popmail/setupDialog.cpp:70
+msgid "Configures the Mail Conduit for KPilot"
+msgstr "設定 KPilot 的 Mail 導管（Mail Conduit）"
+
+#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
+#: conduits/vcalconduit/todo-setup.cpp:55
+#: conduits/vcalconduit/todo-setup.cpp:57
+#: conduits/vcalconduit/vcal-setup.cpp:58
+#: conduits/vcalconduit/vcal-setup.cpp:60
+#: conduits/vcalconduit/vcal-setup.cpp:62
+msgid "Original Author"
+msgstr "原始作者"
+
+#: conduits/popmail/setupDialog.cpp:80
+msgid "POP3 code"
+msgstr "POP3 程式碼"
+
+#: conduits/popmail/setupDialog.cpp:82
+msgid "SMTP support and redesign"
+msgstr "SMTP 支援與重新設計"
+
+#: conduits/recordconduit/factory.cpp:64
+msgid "Record Conduit"
+msgstr "紀錄導管"
+
+#: conduits/recordconduit/factory.cpp:66
+msgid "Record Conduit for KPilot"
+msgstr "KPilot 的紀錄導管"
+
+#: conduits/recordconduit/factory.cpp:68
+msgid "Configures the Record Conduit for KPilot"
+msgstr "設定 KPilot 的紀錄導管（Record Conduit）"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
+msgid "System Information"
+msgstr "系統資訊"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
+msgid "Password set"
+msgstr "已設定密碼"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
+msgid "No password set"
+msgstr "未設定密碼"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
+msgid "No Cards available via pilot-link"
+msgstr "無法透過 pilot-link 找到卡片"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
+msgid "No debug data"
+msgstr "沒有除錯資料"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
+msgid "Unable to open output file, using %1 instead."
+msgstr "無法開啟輸出檔，將使用 %1 取代。"
+
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
+#, c-format
+msgid "Handheld system information written to the file %1"
+msgstr "寫入檔案 %1 的掌上型裝置系統資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
+msgid "HardwareInfo"
+msgstr "硬體資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
+msgid "UserInfo"
+msgstr "使用者資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
+msgid "MemoryInfo"
+msgstr "記憶體資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
+msgid "StorageInfo"
+msgstr "儲存裝置資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
+msgid "DatabaseList"
+msgstr "資料庫清單"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
+msgid "RecordNumbers"
+msgstr "紀錄數量"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
+msgid "SyncInfo"
+msgstr "同步資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
+#, fuzzy
+msgid "KDEVersion"
+msgstr "TDE 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
+msgid "PalmOSVersion"
+msgstr "PalmOS 版本"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
+msgid "DebugInformation"
+msgstr "除錯資訊"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
+msgid "KPilot System Information conduit"
+msgstr "KPilot 系統資訊導管"
+
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
+msgid ""
+"Retrieves System, Hardware, and User Info from the Handheld and stores them "
+"to a file."
+msgstr "從掌上型裝置收取系統、硬體與使用者資訊，並儲存到檔案。"
+
+#: conduits/timeconduit/time-conduit.cpp:57
+#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
+msgid "Time"
+msgstr "時間"
+
+#: conduits/timeconduit/time-conduit.cpp:91
+msgid "Setting the clock on the handheld"
+msgstr "設定掌上型裝置的時間"
+
+#: conduits/timeconduit/time-conduit.cpp:108
+msgid ""
+"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
+"time conduit..."
+msgstr "PalmOS 3.25 與 3.3 版不支援設定系統時間。將忽略時間導管..."
+
+#: conduits/timeconduit/time-setup.cpp:48
+msgid "Time Synchronization Conduit for KPilot"
+msgstr "KPilot 的時間同步導管"
+
+#: conduits/timeconduit/time-setup.cpp:50
+msgid "Synchronizes the Time on the Handheld and the PC"
+msgstr "將掌上型裝置與 PC 上的時間做同步"
+
+#: conduits/vcalconduit/cleanupstate.cpp:62
+msgid "Cleaning up ..."
+msgstr "清除中..."
+
+#: conduits/vcalconduit/cleanupstate.cpp:91
+msgid ""
+"An error occurred while uploading \"%1\". You can try to upload the "
+"temporary local file \"%2\" manually."
+msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
+
+#: conduits/vcalconduit/initstate.cpp:59
+msgid "Initializing conduit ..."
+msgstr "初始化導管中..."
+
+#: conduits/vcalconduit/pctohhstate.cpp:71
+msgid "Copying records to Pilot ..."
+msgstr "複製紀錄到 Pilot..."
+
+#: conduits/vcalconduit/todo-conduit.cpp:183
+#: conduits/vcalconduit/todo-setup.cpp:45
+msgid "To-do"
+msgstr "待辦事項"
+
+#: conduits/vcalconduit/todo-setup.cpp:47
+msgid "To-do Conduit for KPilot"
+msgstr "KPilot 的待辦事項導管"
+
+#: conduits/vcalconduit/todo-setup.cpp:49
+msgid "Configures the To-do Conduit for KPilot"
+msgstr "設定 KPilot 的待辦事項導管（To-do Conduit）"
+
+#: conduits/vcalconduit/todo-setup.cpp:69
+msgid "To-do Destination"
+msgstr "待辦事項目的地"
+
+#: conduits/vcalconduit/vcal-conduit.cpp:178
+#: conduits/vcalconduit/vcal-setup.cpp:70
+msgid "Calendar"
+msgstr "行事曆"
+
+#: conduits/vcalconduit/vcal-conduit.cpp:222
+msgid ""
+"Event \"%1\" has a yearly recurrence other than by month, will change this "
+"to recurrence by month on handheld."
+msgstr "事件 %1 設定為年度循環，而不是月份循環。在掌上型裝置將改為月份循環。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:183
+msgid "Could not open the calendar databases."
+msgstr "無法開啟行事曆資料庫。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:269
+msgid ""
+"You selected to sync with an iCalendar file, but did not give a filename. "
+"Please select a valid file name in the conduit's configuration dialog"
+msgstr ""
+"您選擇要與 iCalendar 檔案同步，但是未指定檔案名稱。請在導管設定對話框中選擇一"
+"個合法檔案。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:356
+#, c-format
+msgid "Using local time zone: %1"
+msgstr "使用本地端時區 %1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:292
+#: conduits/vcalconduit/vcal-conduitbase.cpp:357
+#, c-format
+msgid "Using non-local time zone: %1"
+msgstr "使用非本地端時區 %1"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:321
+msgid ""
+"You chose to sync with the file \"%1\", which cannot be opened or created. "
+"Please make sure to supply a valid file name in the conduit's configuration "
+"dialog. Aborting the conduit."
+msgstr ""
+"您選擇與檔案 %1 同步，但是檔案無法開啟或建立。請確定您在導管設定中所給的是正"
+"確的檔名。將中止此導管。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:330
+msgid "Syncing with file \"%1\""
+msgstr "與檔案 %1 同步中"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:354
+msgid "Syncing with standard calendar resource."
+msgstr "與標準行事曆資源同步。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:367
+msgid ""
+"Unable to initialize the calendar object. Please check the conduit's setup"
+msgstr "無法初始化行事曆物件。請檢查導管設定。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:425
+msgid ""
+"The following item was modified both on the Handheld and on your PC:\n"
+"PC entry:\n"
+"\t"
+msgstr ""
+"以下的項目在掌上型裝置與 PC 中都已修改：\n"
+"PC 項目：\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:428
+msgid ""
+"\n"
+"Handheld entry:\n"
+"\t"
+msgstr ""
+"\n"
+"掌上型裝置項目：\n"
+"\t"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:430
+msgid ""
+"\n"
+"\n"
+"Which entry do you want to keep? It will overwrite the other entry."
+msgstr ""
+"\n"
+"\n"
+"您要保存哪個項目？另一個會被覆寫掉。"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:435
+msgid "Conflicting Entries"
+msgstr "衝突的項目"
+
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
+msgid "PC"
+msgstr "PC"
+
+#: conduits/vcalconduit/vcal-setup.cpp:44
+msgid "VCal Conduit for KPilot"
+msgstr "KPilot 的 VCal 導管"
+
+#: conduits/vcalconduit/vcal-setup.cpp:46
+msgid "Configures the VCal Conduit for KPilot"
+msgstr "設定 KPilot 的 VCal 導管（VCal Conduit）"
+
+#: conduits/vcalconduit/vcal-setup.cpp:64
+msgid "iCalendar port"
+msgstr "iCalendar 移植"
+
+#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
+#: kpilot/kpilot.cpp:1039
+msgid "Bugfixer"
+msgstr "修正錯誤"
+
+#: conduits/vcalconduit/vcal-setup.cpp:69
+msgid "Calendar Destination"
+msgstr "行事曆目的地"
+
+#: kpilot/addressEditor.cpp:59
+msgid "Address Editor"
+msgstr "地址編輯器"
+
+#: kpilot/addressEditor.cpp:107
+msgid "Phone"
+msgstr "電話"
+
+#: kpilot/addressEditor.cpp:180
+msgid "Last name:"
+msgstr "姓："
+
+#: kpilot/addressEditor.cpp:181
+msgid "First name:"
+msgstr "名："
+
+#: kpilot/addressEditor.cpp:182
+msgid "Title:"
+msgstr "職稱："
+
+#: kpilot/addressEditor.cpp:183
+msgid "Company:"
+msgstr "公司："
+
+#: kpilot/addressEditor.cpp:192
+msgid "Address:"
+msgstr "地址："
+
+#: kpilot/addressEditor.cpp:193
+msgid "City:"
+msgstr "城市："
+
+#: kpilot/addressEditor.cpp:194
+msgid "State:"
+msgstr "省/州："
+
+#: kpilot/addressEditor.cpp:195
+msgid "Zip code:"
+msgstr "郵遞區號："
+
+#: kpilot/addressEditor.cpp:196
+msgid "Country:"
+msgstr "國家："
+
+#: kpilot/addressEditor.cpp:197
+msgid "Custom 1:"
+msgstr "自訂 1："
+
+#: kpilot/addressEditor.cpp:198
+msgid "Custom 2:"
+msgstr "自訂 2："
+
+#: kpilot/addressEditor.cpp:199
+msgid "Custom 3:"
+msgstr "自訂 3："
+
+#: kpilot/addressEditor.cpp:200
+msgid "Custom 4:"
+msgstr "自訂 4："
+
+#: kpilot/addressWidget.cpp:187
+msgid "There are still %1 address editing windows open."
+msgstr "目前仍開著 %1 地址編輯視窗。"
+
+#: kpilot/addressWidget.cpp:191
+#, c-format
+msgid ""
+"_n: There is still an address editing window open.\n"
+"There are still %n address editing windows open."
+msgstr "目前仍開著 %n 個地址編輯視窗。"
+
+#: kpilot/addressWidget.cpp:224
+msgid "<qt>Select the category of addresses to display here.</qt>"
+msgstr "<qt>選擇要在此顯示的地址類別。</qt>"
+
+#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
+#: kpilot/todoWidget.cpp:220
+msgid "Category:"
+msgstr "類別："
+
+#: kpilot/addressWidget.cpp:237
+msgid ""
+"<qt>This list displays all the addresses in the selected category. Click on "
+"one to display it to the right.</qt>"
+msgstr ""
+"<qt>這個清單顯示所選取的類別中的所有地址。點選其中一個，可以在右邊顯示。</qt>"
+
+#: kpilot/addressWidget.cpp:241
+msgid "Address info:"
+msgstr "地址資訊："
+
+#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
+msgid "Edit Record..."
+msgstr "編輯紀錄..."
+
+#: kpilot/addressWidget.cpp:255
+msgid "<qt>You can edit an address when it is selected.</qt>"
+msgstr "<qt>您可以選取地址並編輯。</qt>"
+
+#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
+msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉編輯功能。</i></qt>"
+
+#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
+msgid "New Record..."
+msgstr "新紀錄..."
+
+#: kpilot/addressWidget.cpp:263
+msgid "<qt>Add a new address to the address book.</qt>"
+msgstr "<qt>新增地址到通訊錄中。</qt>"
+
+#: kpilot/addressWidget.cpp:264
+msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉新增功能。</i></qt>"
+
+#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
+msgid "Delete Record"
+msgstr "刪除紀錄"
+
+#: kpilot/addressWidget.cpp:274
+msgid "<qt>Delete the selected address from the address book.</qt>"
+msgstr "<qt>從通訊錄中刪除所選取的地址。</qt>"
+
+#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
+#: kpilot/todoWidget.cpp:281
+msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉刪除功能。</i></qt>"
+
+#: kpilot/addressWidget.cpp:277
+msgid ""
+"_: Export addresses to file\n"
+"Export..."
+msgstr "匯出..."
+
+#: kpilot/addressWidget.cpp:281
+msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
+msgstr "<qt>將所選取類別中所有的位置以 CSV 格式匯出。</qt>"
+
+#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
+msgid "[unknown]"
+msgstr "【未知】"
+
+#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
+msgid "Cannot edit new records until HotSynced with Pilot."
+msgstr "在與 Pilot 做熱同步前無法編輯新的紀錄。"
+
+#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
+#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
+msgid "HotSync Required"
+msgstr "需要熱同步"
+
+#: kpilot/addressWidget.cpp:480
+msgid ""
+"You cannot add addresses to the address book until you have done a HotSync "
+"at least once to retrieve the database layout from your Pilot."
+msgstr ""
+"您必須至少執行一次熱同步，從您的 Pilot 上取得資料庫佈局之後，您才能夠開始新增"
+"地址。"
+
+#: kpilot/addressWidget.cpp:483
+msgid "Cannot Add New Address"
+msgstr "無法新增地址"
+
+#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
+msgid "New records cannot be deleted until HotSynced with pilot."
+msgstr "在與 Pilot 做熱同步前無法刪除新的紀錄。"
+
+#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
+msgid "Delete currently selected record?"
+msgstr "要刪除目前選取的紀錄嗎？"
+
+#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
+msgid "Delete Record?"
+msgstr "刪除紀錄？"
+
+#: kpilot/addressWidget.cpp:677
+msgid "Export All Addresses"
+msgstr "匯出所有的地址"
+
+#: kpilot/addressWidget.cpp:678
+#, c-format
+msgid "Export Address Category %1"
+msgstr "匯出地址類別 %1"
+
+#: kpilot/addressWidget.cpp:696
+msgid "The file <i>%1</i> exists. Overwrite?"
+msgstr "檔案 <i>%1</i> 已存在。要覆寫嗎？"
+
+#: kpilot/addressWidget.cpp:697
+msgid "Overwrite File?"
+msgstr "覆寫檔案？"
+
+#: kpilot/addressWidget.cpp:710
+msgid "The file <i>%1</i> could not be opened for writing."
+msgstr "檔案 <i>%1</i> 無法開啟以寫入。"
+
+#: kpilot/conduitConfigDialog.cpp:252
+msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
+msgstr "<qt>此導管似乎已損毀而無法設定。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:260
+msgid "<qt>This is an old-style conduit.</qt>"
+msgstr "<qt>這是舊式的導管。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:264
+msgid "Configure..."
+msgstr "設定..."
+
+#: kpilot/conduitConfigDialog.cpp:274
+msgid ""
+"<qt><i>Conduits</i> are external (possibly third-party) programs that "
+"perform synchronization actions. They may have individual configurations. "
+"Select a conduit to configure it, and enable it by clicking on its checkbox. "
+"</qt>"
+msgstr ""
+"<qt>所謂的導管（<i>Conduits</i>）是外部程式（有可能是第三者提供的），用以執行"
+"同步動作。每個導管都可能有自己的設定。請選擇一個導管，設定好後勾選就可以開始"
+"使用。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:282
+msgid ""
+"<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
+"your hardware and the way KPilot should display your data. For the basic "
+"setup, which should fulfill the need of most users, just use the setup "
+"wizard below.</p>If you need some special settings, this dialog provides all "
+"the options for fine-tuning KPilot. But be warned: The HotSync settings are "
+"various esoteric things.</p><p>You can enable an action or conduit by "
+"clicking on its checkbox. Checked conduits will be run during a HotSync. "
+"Select a conduit to configure it.</p></qt>"
+msgstr ""
+"<qt><p>KPilot 設定中的「一般」設定包括了您的硬體，以及 KPilot 顯示您的資料的"
+"方法設定。要做基本設定，您可以用底下的組態精靈。</p> <p>如果您需要做一些特殊"
+"設定，此對話框提供了微調 KPilot 所需的所有選項。不過請小心：熱同步（HotSync）"
+"設定裡多半是一些有經驗的人才懂的設定。</p> <p>您可以勾選以開啟一個動作或導"
+"管。所選取的導管會在熱同步時執行。選擇一個導管以設定。</p></qt>"
+
+#: kpilot/conduitConfigDialog.cpp:295
+msgid "Configuration Wizard"
+msgstr "組態精靈"
+
+#: kpilot/conduitConfigDialog.cpp:369
+msgid "About KPilot. Credits."
+msgstr "關於 KPilot。致謝。"
+
+#: kpilot/conduitConfigDialog.cpp:372
+msgid "Conduits"
+msgstr "導管"
+
+#: kpilot/conduitConfigDialog.cpp:374
+msgid "General Setup"
+msgstr "一般設定"
+
+#: kpilot/conduitConfigDialog.cpp:382
+msgid "General setup of KPilot (User name, port, general sync settings)"
+msgstr "KPilot 的一般設定（使用者名稱、連接埠、通用同步設定等）"
+
+#: kpilot/conduitConfigDialog.cpp:384
+msgid "Actions for HotSync with individual configuration."
+msgstr "熱同步動作的個別設定。"
+
+#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
+msgid "Startup and Exit"
+msgstr "啟動與離開"
+
+#: kpilot/conduitConfigDialog.cpp:395
+msgid "Behavior at startup and exit."
+msgstr "啟動與離開的行為。"
+
+#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
+#: kpilot/kpilotConfigDialog_viewers.ui:33
+#, no-c-format
+msgid "Viewers"
+msgstr "檢視器"
+
+#: kpilot/conduitConfigDialog.cpp:396
+msgid "Viewer settings."
+msgstr "檢視器設定。"
+
+#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
+#: lib/syncAction.cpp:208
+msgid "Backup"
+msgstr "備份"
+
+#: kpilot/conduitConfigDialog.cpp:397
+msgid "Special settings for backup."
+msgstr "備份的特別設定。"
+
+#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261
+#: kpilot/kpilot.cpp:263 kpilot/kpilot.cpp:515
+#: kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
+msgid "HotSync"
+msgstr "熱同步"
+
+#: kpilot/conduitConfigDialog.cpp:398
+msgid "Special behavior during HotSync."
+msgstr "熱同步期間的特別行為設定。"
+
+#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
+msgid "Device"
+msgstr "裝置"
+
+#: kpilot/conduitConfigDialog.cpp:399
+msgid "Hardware settings and startup and exit options."
+msgstr "硬體設定，以及啟動與離開的選項。"
+
+#: kpilot/conduitConfigDialog.cpp:542
+msgid ""
+"<qt>This is an internal action which has no configuration options. The "
+"action's description is: <i>%1</i> </qt>"
+msgstr "<qt>這是沒有設定選項的內部動作。動作的描述為：<i>%1</i>。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:722
+msgid "KPilot Setup"
+msgstr "KPilot 設定"
+
+#: kpilot/conduitConfigDialog.cpp:735
+msgid ""
+"<qt>No library could be found for the conduit %1. This means that the "
+"conduit was not installed properly.</qt>"
+msgstr "<qt>找不到導管 %1 所需的函式庫。這表示導管沒有正確安裝。</qt>"
+
+#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
+msgid "Conduit Error"
+msgstr "導管錯誤"
+
+#: kpilot/conduitConfigDialog.cpp:752
+msgid ""
+"<qt>There was a problem loading the library for the conduit %1. This means "
+"that the conduit was not installed properly.</qt>"
+msgstr "<qt>載入導管 %1 的函式庫時發生問題。這表示導管沒有正確安裝。</qt>"
+
+#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
+msgid "&Add..."
+msgstr "新增(&A)..."
+
+#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#: kpilot/datebookWidget.cpp:64
+msgid "&Delete..."
+msgstr "刪除(&D)..."
+
+#: kpilot/datebookWidget.cpp:69
+msgid "Al"
+msgstr "AI"
+
+#: kpilot/datebookWidget.cpp:70
+msgid "Rec"
+msgstr "紀錄"
+
+#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
+msgid "Description"
+msgstr "描述"
+
+#: kpilot/dbAppInfoEditor.cpp:46
+msgid "Edit AppInfo Block"
+msgstr "編輯應用程式資訊區塊"
+
+#: kpilot/dbAppInfoEditor.cpp:68
+msgid ""
+"To view the Application info block data, please install a hex editor (e.g. "
+"khexedit from tdeutils)."
+msgstr ""
+"要檢視應用程式資訊區塊的資料，請安裝十六進位碼編輯器（如 tdeutils 中的 "
+"khexedit）"
+
+#: kpilot/dbAppInfoEditor.cpp:86
+msgid "Changing the AppInfo block isn't yet supported by KPilot!"
+msgstr "KPilot 尚未支援變更應用程式區塊。"
+
+#: kpilot/dbFlagsEditor.cpp:45
+msgid "Edit Database Flags"
+msgstr "編輯資料庫旗標"
+
+#: kpilot/dbFlagsEditor.cpp:60
+msgid ""
+"Changing the database flags might corrupt the whole database, or make the "
+"data unusable. Do not change the values unless you are absolutely sure you "
+"know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"變更資料庫旗標可能會造成整個資料庫損毀，或是讓資料無法使用。除非您十分確定您"
+"在做什麼，否則不要任意變更這些值。\n"
+"\n"
+"您確定要指定這些新的旗標嗎？"
+
+#: kpilot/dbFlagsEditor.cpp:60
+msgid "Changing Database Flags"
+msgstr "變更資料庫旗標"
+
+#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
+msgid "Assign"
+msgstr "指定"
+
+#: kpilot/dbRecordEditor.cpp:53
+msgid "Edit Record"
+msgstr "編輯紀錄"
+
+#: kpilot/dbRecordEditor.cpp:75
+msgid ""
+"Changing the record data and flags might corrupt the whole record, or even "
+"make the database unusable. Do not change the values unless you are "
+"absolutely sure you know what you are doing.\n"
+"\n"
+"Really assign these new flags?"
+msgstr ""
+"變更紀錄資料與旗標可能會造成整個紀錄損毀，或甚至造成整個資料庫無法使用。除非"
+"您十分確定您在做什麼，否則不要任意變更這些值。\n"
+"\n"
+"您確定要指定這些新的旗標嗎？"
+
+#: kpilot/dbRecordEditor.cpp:75
+msgid "Changing Record"
+msgstr "變更紀錄"
+
+#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
+#, no-c-format
+msgid "Record index:"
+msgstr "紀錄索引："
+
+#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
+#, no-c-format
+msgid "Record ID:"
+msgstr "紀錄代碼："
+
+#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
+#: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
+#: kpilot/todoEditor_base.ui:99
+#, no-c-format
+msgid "1"
+msgstr "1"
+
+#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
+#, no-c-format
+msgid "Flags"
+msgstr "旗標"
+
+#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
+#, no-c-format
+msgid "&Dirty"
+msgstr "未同步（Dirty）(&D)"
+
+#: kpilot/dbRecordEditor.cpp:112
+msgid "De&leted"
+msgstr "已刪除(&L)"
+
+#: kpilot/dbRecordEditor.cpp:113
+msgid "&Busy"
+msgstr "忙碌(&B)"
+
+#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
+#, no-c-format
+msgid "&Secret"
+msgstr "秘密(&S)"
+
+#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
+#, no-c-format
+msgid "&Archived"
+msgstr "已歸檔(&A)"
+
+#: kpilot/dbRecordEditor.cpp:193
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. "
+"kbytesedit from tdeutils)."
+msgstr ""
+"要檢視與編輯紀錄資料，請安裝十六進位碼編輯器（如 tdeutils 中的 khexedit）。"
+
+#: kpilot/dbSelectionDialog.cpp:108
+msgid ""
+"This is a database that exists on the device. It was not added manually, so "
+"it can not removed from the list."
+msgstr "這是裝置上的資料庫。它不是手動新增的，所以也無法從清單中移除。"
+
+#: kpilot/dbSelectionDialog.cpp:108
+msgid "Database on Device"
+msgstr "裝置上的資料庫"
+
+#: kpilot/dbSelectionDialog.cpp:119
+msgid "You need to select a database to delete in the list."
+msgstr "您需要選取資料庫以從清單上刪除。"
+
+#: kpilot/dbSelectionDialog.cpp:119
+msgid "No Database Selected"
+msgstr "沒有選取資料庫"
+
+#: kpilot/dbviewerWidget.cpp:84
+msgid "All Databases"
+msgstr "所有資料庫"
+
+#: kpilot/dbviewerWidget.cpp:85
+msgid "Only Applications (*.prc)"
+msgstr "應用程式（*.prc）"
+
+#: kpilot/dbviewerWidget.cpp:86
+msgid "Only Databases (*.pdb)"
+msgstr "資料庫（*.pdb）"
+
+#: kpilot/dbviewerWidget.cpp:93
+msgid "General Database &Information"
+msgstr "一般資料庫資訊(&I)"
+
+#: kpilot/dbviewerWidget.cpp:95
+msgid "&Application Info Block (Categories etc.)"
+msgstr "應用程式資訊區塊（類別等等）(&A)"
+
+#: kpilot/dbviewerWidget.cpp:101
+msgid "Rec. Nr."
+msgstr "紀錄數量"
+
+#: kpilot/dbviewerWidget.cpp:102
+msgid "Length"
+msgstr "長度"
+
+#: kpilot/dbviewerWidget.cpp:103
+msgid "Record ID"
+msgstr "紀錄代碼"
+
+#: kpilot/dbviewerWidget.cpp:189
+#, c-format
+msgid "<B>Warning:</B> Cannot read database file %1."
+msgstr "<B>警告：</B>無法讀取資料庫檔案 %1。"
+
+#: kpilot/dbviewerWidget.cpp:194
+msgid "<B>Database:</B> %1, %2 records<BR>"
+msgstr "<B>資料庫：</B>%1，%2 筆紀錄<BR>"
+
+#: kpilot/dbviewerWidget.cpp:203
+msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
+msgstr "<B>類型：</B>%1，<B>建立者：</B>%2<br><br>"
+
+#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
+#, c-format
+msgid "<B>Warning:</B> Cannot read application file %1."
+msgstr "<B>警告：</B>無法讀取應用程式檔案 %1。"
+
+#: kpilot/dbviewerWidget.cpp:260
+msgid "<B>Application:</B> %1<BR><BR>"
+msgstr "<B>應用程式：</B>%1<BR><BR>"
+
+#: kpilot/dbviewerWidget.cpp:267
+msgid "Created: %1<BR>"
+msgstr "已建立：%1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:270
+msgid "Modified: %1<BR>"
+msgstr "已修改：%1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:273
+msgid "Backed up: %1<BR>"
+msgstr "已備份：%1<BR>"
+
+#: kpilot/dbviewerWidget.cpp:353
+msgid "You must select a record for editing."
+msgstr "您必須選擇要編輯的紀錄。"
+
+#: kpilot/dbviewerWidget.cpp:353
+msgid "No Record Selected"
+msgstr "沒有選取紀錄"
+
+#: kpilot/dbviewerWidget.cpp:366
+msgid ""
+"<qt>Do you really want to delete the selected record? This cannot be undone."
+"<br><br>Delete record?<qt>"
+msgstr ""
+"<qt>您確定要刪除所選取的紀錄嗎？此動作無法復原。<br><br>要刪除紀錄嗎？<qt>"
+
+#: kpilot/dbviewerWidget.cpp:366
+msgid "Deleting Record"
+msgstr "刪除紀錄中"
+
+#: kpilot/fileInstallWidget.cpp:71
+msgid "Files to install:"
+msgstr "要安裝的檔案："
+
+#: kpilot/fileInstallWidget.cpp:77
+msgid "Add File..."
+msgstr "新增檔案..."
+
+#: kpilot/fileInstallWidget.cpp:81
+msgid "<qt>Choose a file to add to the list of files to install.</qt>"
+msgstr "<qt>請選取要新增到安裝檔案清單中檔案。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:83
+msgid "Clear List"
+msgstr "清除清單"
+
+#: kpilot/fileInstallWidget.cpp:87
+msgid ""
+"<qt>Clear the list of files to install. No files will be installed.</qt>"
+msgstr "<qt>清除要安裝的檔案清單。將不安裝任何檔案。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:95
+msgid ""
+"<qt>This lists files that will be installed on the Pilot during the next "
+"HotSync. Drag files here or use the Add button.</qt>"
+msgstr ""
+"<qt>這裡列出在下次熱同步時要安裝在 Pilot 上的檔案。您可以將檔案拖放到這裡，或"
+"是用「新增」按鍵來新增。</qt>"
+
+#: kpilot/fileInstallWidget.cpp:217
+msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
+msgstr "*.pdb *.prc|PalmOS 資料庫（*.pdb *.prc）"
+
+#: kpilot/fileInstallWidget.cpp:291
+msgid ""
+"_: Delete a single file item\n"
+"Delete"
+msgstr "刪除"
+
+#: kpilot/fileInstallWidget.cpp:294
+msgid "Delete selected files"
+msgstr "刪除所選取的檔案。"
+
+#: kpilot/fileInstaller.cpp:109
+#, c-format
+msgid "Cannot install %1"
+msgstr "無法安裝 %1"
+
+#: kpilot/fileInstaller.cpp:110
+msgid ""
+"Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
+"file installer."
+msgstr "檔案安裝器只能安裝 PalmOS 資料庫檔案（如 *.pdb 與 *.prc）。"
+
+#: kpilot/hotSync.cpp:339
+#, c-format
+msgid "Backup directory: %1."
+msgstr "備份目錄：%1。"
+
+#: kpilot/hotSync.cpp:353
+msgid "Full backup started."
+msgstr "開始完整備份。"
+
+#: kpilot/hotSync.cpp:358
+msgid "Fast backup started"
+msgstr "開始快速備份。"
+
+#: kpilot/hotSync.cpp:387
+msgid "Exiting on cancel."
+msgstr "已取消而離開。"
+
+#: kpilot/hotSync.cpp:399
+msgid "Full backup complete."
+msgstr "完整備份已完成。"
+
+#: kpilot/hotSync.cpp:403
+msgid "Fast backup complete."
+msgstr "快速備份已完成。"
+
+#: kpilot/hotSync.cpp:419
+#, c-format
+msgid "Backing up: %1"
+msgstr "備份：%1"
+
+#: kpilot/hotSync.cpp:447
+#, c-format
+msgid "Skipping %1"
+msgstr "略過 %1"
+
+#: kpilot/hotSync.cpp:482
+msgid "Backup of %1 failed.\n"
+msgstr "%1 備份失敗。\n"
+
+#: kpilot/hotSync.cpp:540
+msgid "... OK.\n"
+msgstr " .. 完成\n"
+
+#: kpilot/hotSync.cpp:548
+msgid "Backup failed."
+msgstr "備份失敗。"
+
+#: kpilot/hotSync.cpp:607
+msgid "[File Installer]"
+msgstr "【檔案安裝器】"
+
+#: kpilot/hotSync.cpp:612
+msgid "No Files to install"
+msgstr "沒有要安裝的檔案"
+
+#: kpilot/hotSync.cpp:624
+#, c-format
+msgid ""
+"_n: Installing one file\n"
+"Installing %n Files"
+msgstr "安裝了 %n 個檔案"
+
+#: kpilot/hotSync.cpp:649
+msgid "Done Installing Files"
+msgstr "安裝檔案已完成"
+
+#: kpilot/hotSync.cpp:663
+#, c-format
+msgid "Installing %1"
+msgstr "安裝 %1 中"
+
+#: kpilot/hotSync.cpp:686
+msgid "Cannot install file &quot;%1&quot;."
+msgstr "無法安裝檔案 %1"
+
+#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
+msgid "Unable to open file &quot;%1&quot;."
+msgstr "無法開啟檔案 %1"
+
+#: kpilot/hotSync.cpp:732
+msgid "Unable to read file &quot;%1&quot;."
+msgstr "無法讀取檔案 %1"
+
+#: kpilot/hotSync.cpp:748
+msgid ""
+"The database in &quot;%1&quot; has a resource name that is longer than 31 "
+"characters. This suggests a bug in the tool used to create the database. "
+"KPilot cannot install this database."
+msgstr ""
+"%1 的資料庫中含有超過 31 個字元的資源名稱。這表示用於建立資料庫的工具可能有問"
+"題。KPilot 無法安裝此資料庫。"
+
+#: kpilot/hotSync.cpp:806
+msgid ""
+"_: A common name\n"
+"John Doe"
+msgstr "John Doe"
+
+#: kpilot/hotSync.cpp:808
+msgid ""
+"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
+"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
+msgstr ""
+"<qt>KPilot 與掌上型裝置都沒有設定使用者名稱。使用者名稱必須要設定。要讓 "
+"KPilot 設為預設值（<i>%1</i>）嗎？</qt>"
+
+#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
+msgid "User Unknown"
+msgstr "使用者未知"
+
+#: kpilot/hotSync.cpp:826
+msgid ""
+"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
+"KPilot use this username in future?</qt>"
+msgstr ""
+"<qt>掌上型裝置中有設定使用者名稱（<i>%1</i>），但是 KPilot 沒有。要讓 KPilot "
+"將來都用這個使用者名稱嗎？"
+
+#: kpilot/hotSync.cpp:844
+msgid ""
+"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
+"KPilot's username be set in the handheld as well?"
+msgstr ""
+"<qt>KPilot 中有設定使用者名稱（<i>%1</i>），但是掌上型裝置沒有。要讓掌上型裝"
+"置設定此使用者名稱嗎？"
+
+#: kpilot/hotSync.cpp:848
+msgid ""
+"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
+"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
+"stop this sync.)"
+msgstr ""
+"<br/>（注意：若是您的掌上型裝置已被重置回出廠預設值，您應該用「回復」而不是用"
+"熱同步。點選「取消」來取消這次同步。）"
+
+#: kpilot/hotSync.cpp:877
+msgid ""
+"<qt>The handheld thinks that the username is %1; however, KPilot says you "
+"are %2.Which of these is the correct name?\n"
+"If you click on Cancel, the sync will proceed, but the usernames will not be "
+"changed.</qt>"
+msgstr ""
+"<qt>掌上型裝置認為使用者名稱為 %1，但是 KPilot 認為您是 %2。哪個才是正確的？"
+"如果您選擇「取消」，會繼續同步，但是使用者名稱不會變更。</qt>"
+
+#: kpilot/hotSync.cpp:887
+msgid "User Mismatch"
+msgstr "使用者不符合"
+
+#: kpilot/hotSync.cpp:890
+msgid "Use KPilot Name"
+msgstr "使用 KPilot 名稱"
+
+#: kpilot/hotSync.cpp:891
+msgid "Use Handheld Name"
+msgstr "使用掌上型裝置名稱"
+
+#: kpilot/hotSync.cpp:997
+msgid "Restore directory does not exist."
+msgstr "要回復的目錄不存在。"
+
+#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
+msgid "Restore not performed."
+msgstr "回復未執行。"
+
+#: kpilot/hotSync.cpp:1003
+msgid ""
+"<qt>Are you sure you want to completely restore your Pilot from the backup "
+"directory (<i>%1</i>)? This will erase any information you currently have on "
+"your Pilot.</qt>"
+msgstr ""
+"<qt>您確定您要從備份目錄（<i>%1</i>）中完整回復您的 Pilot 嗎？這會將您的 "
+"Pilot 上現有的資訊消除掉。</qt>"
+
+#: kpilot/hotSync.cpp:1008
+msgid "Restore Pilot"
+msgstr "回復 Pilot"
+
+#: kpilot/hotSync.cpp:1010
+msgid "Restore <i>not</i> performed."
+msgstr "回復<i>未</i>執行。"
+
+#: kpilot/hotSync.cpp:1012
+msgid "Canceled by user."
+msgstr "使用者已取消。"
+
+#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
+msgid "Restoring %1..."
+msgstr "回復 %1 中..."
+
+#: kpilot/hotSync.cpp:1044
+msgid "File '%1' cannot be read."
+msgstr "無法讀取檔案 %1。"
+
+#: kpilot/hotSync.cpp:1071
+msgid "OK."
+msgstr "完成。"
+
+#: kpilot/hotSync.cpp:1085
+msgid "Restore incomplete."
+msgstr "回復未完成。"
+
+#: kpilot/hotSync.cpp:1100
+msgid "Cannot restore file `%1'."
+msgstr "無法回復檔案 %1。"
+
+#: kpilot/internalEditorAction.cpp:62
+msgid "[Internal Editors]"
+msgstr "【內部編輯器】"
+
+#: kpilot/internalEditorAction.cpp:76
+#, c-format
+msgid "Databases with changed records: %1"
+msgstr "含有已變更紀錄的資料庫：%1"
+
+#: kpilot/internalEditorAction.cpp:101
+msgid "Unable to open the serial or local database for %1. Skipping it."
+msgstr "無法開啟 %1 的序列或本地資料庫。將略過。"
+
+#: kpilot/internalEditorAction.cpp:156
+msgid "record"
+msgstr "紀錄"
+
+#: kpilot/internalEditorAction.cpp:166
+msgid "address"
+msgstr "地址"
+
+#: kpilot/internalEditorAction.cpp:177
+msgid "to-do entry"
+msgstr "待辦事項"
+
+#: kpilot/internalEditorAction.cpp:186
+msgid "memo"
+msgstr "備忘"
+
+#: kpilot/internalEditorAction.cpp:197
+msgid "calendar entry"
+msgstr "行事曆項目"
+
+#: kpilot/internalEditorAction.cpp:204
+msgid ""
+"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
+"the internal editor. Shall the changes in KPilot be copied to the handheld, "
+"and so override the changes there?"
+msgstr ""
+"資料庫 %3 的 %1（ID %2）已經在掌上型裝置與內部編輯器上都做了變更。要將 "
+"KPilot 上的變更複製到掌上型裝置，並覆寫那邊的變更嗎？"
+
+#: kpilot/internalEditorAction.cpp:209
+#, c-format
+msgid "Conflict in database  %1"
+msgstr "資料庫 %1 發生衝突"
+
+#: kpilot/internalEditorAction.cpp:211
+msgid "Use KPilot"
+msgstr "使用 KPilot"
+
+#: kpilot/internalEditorAction.cpp:211
+msgid "Use Handheld"
+msgstr "使用掌上型裝置"
+
+#: kpilot/internalEditorAction.cpp:212
+msgid "Use &KPilot"
+msgstr "使用 KPilot(&K)"
+
+#: kpilot/internalEditorAction.cpp:213
+msgid "Use &Handheld"
+msgstr "使用掌上型裝置(&H)"
+
+#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
+msgid "Entry in KPilot"
+msgstr "KPilot 裡的項目"
+
+#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
+msgid "Entry on Handheld"
+msgstr "掌上型裝置裡的項目"
+
+#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
+msgid ""
+"To view and edit the record data, please install a hex editor (e.g. khexedit "
+"from tdeutils)."
+msgstr ""
+"要檢視並編輯紀錄資料，請安裝十六進位碼編輯器（如 tdeutils 中的 khexedit）"
+
+#: kpilot/internalEditorAction.cpp:315
+#, c-format
+msgid "Databases with changed flags: %1"
+msgstr "已變更的資料庫：%1"
+
+#: kpilot/internalEditorAction.cpp:333
+msgid "Setting the database flags on the handheld is not yet supported."
+msgstr "尚未支援設定掌上型裝置的資料庫旗標。"
+
+#: kpilot/internalEditorAction.cpp:356
+#, c-format
+msgid "Databases with changed AppBlock: %1"
+msgstr "已變更應用程式區塊的資料庫：%1"
+
+#: kpilot/kpilot.cpp:162
+msgid "Starting the KPilot daemon ..."
+msgstr "啟動 KPilot 守護程式..."
+
+#: kpilot/kpilot.cpp:179
+msgid ""
+"Could not start the KPilot daemon. The system error message was: &quot;"
+"%1&quot;"
+msgstr "無法啟動 KPilot 守護程式。系統錯誤訊息為：%1"
+
+#: kpilot/kpilot.cpp:196
+msgid "Daemon status is `%1'"
+msgstr "守護程式狀態為：%1"
+
+#: kpilot/kpilot.cpp:197
+msgid "not running"
+msgstr "未執行"
+
+#: kpilot/kpilot.cpp:214
+msgid "Using character set %1 on the handheld."
+msgstr "掌上型裝置使用字元集 %1。"
+
+#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
+msgid "To-do Viewer"
+msgstr "待辦事項檢視器"
+
+#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
+#: kpilot/kpilotConfigDialog_viewers.ui:74
+#, no-c-format
+msgid "Address Viewer"
+msgstr "地址檢視器"
+
+#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
+msgid "Memo Viewer"
+msgstr "備忘錄檢視器"
+
+#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
+msgid "File Installer"
+msgstr "檔案安裝器"
+
+#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
+msgid "Generic DB Viewer"
+msgstr "一般資料庫檢視器"
+
+#: kpilot/kpilot.cpp:360
+msgid "Next sync will be a backup. "
+msgstr "下一次同步將做備份。"
+
+#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
+#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
+#: kpilot/pilotDaemon.cpp:671
+msgid "Please press the HotSync button."
+msgstr "請按下熱同步鍵。"
+
+#: kpilot/kpilot.cpp:368
+msgid "Next sync will restore the Pilot from backup. "
+msgstr "下一次同步將從備份回復 Pilot。"
+
+#: kpilot/kpilot.cpp:376
+msgid "Next sync will be a regular HotSync. "
+msgstr "下一次同步將做正規的熱同步。"
+
+#: kpilot/kpilot.cpp:384
+msgid "Next sync will be a Full Sync. "
+msgstr "下一次同步將做完整同步。"
+
+#: kpilot/kpilot.cpp:392
+msgid "Next sync will copy Handheld data to PC. "
+msgstr "下一次同步將複製掌上型裝置資料到 PC。"
+
+#: kpilot/kpilot.cpp:400
+msgid "Next sync will copy PC data to Handheld. "
+msgstr "下一次同步將複製 PC 資料到掌上型裝置。"
+
+#: kpilot/kpilot.cpp:428
+msgid "The daemon has exited."
+msgstr "守護程式已離開。"
+
+#: kpilot/kpilot.cpp:429
+msgid "No further HotSyncs are possible."
+msgstr "無法再做熱同步。"
+
+#: kpilot/kpilot.cpp:430
+msgid "Restart the daemon to HotSync again."
+msgstr "要再做熱同步，請重新啟動守護程式。"
+
+#: kpilot/kpilot.cpp:450
+#, c-format
+msgid "Cannot start a Sync now. %1"
+msgstr "目前無法啟動同步。%1"
+
+#: kpilot/kpilot.cpp:463
+msgid "Cannot start Sync"
+msgstr "無法開始同步。"
+
+#: kpilot/kpilot.cpp:517
+msgid "Select the kind of HotSync to perform next."
+msgstr "選擇下次要執行的熱同步種類。"
+
+#: kpilot/kpilot.cpp:518
+msgid ""
+"Select the kind of HotSync to perform next. This applies only to the next "
+"HotSync; to change the default, use the configuration dialog."
+msgstr ""
+"選擇下次要執行的熱同步種類。這只在下次熱同步時套用。如果要改變預設值，請到設"
+"定對話框中設定。"
+
+#: kpilot/kpilot.cpp:525
+msgid "&HotSync"
+msgstr "熱同步(&H)"
+
+#: kpilot/kpilot.cpp:528
+msgid "Next HotSync will be normal HotSync."
+msgstr "下一次熱同步將執行正常熱同步。"
+
+#: kpilot/kpilot.cpp:529
+msgid "Tell the daemon that the next HotSync should be a normal HotSync."
+msgstr "告訴守護程式，下次熱同步時應該執行正常的熱同步動作。"
+
+#: kpilot/kpilot.cpp:533
+msgid "Full&Sync"
+msgstr "完整同步(&S)"
+
+#: kpilot/kpilot.cpp:536
+msgid "Next HotSync will be a FullSync."
+msgstr "下一次熱同步將執行完整同步。"
+
+#: kpilot/kpilot.cpp:537
+msgid ""
+"Tell the daemon that the next HotSync should be a FullSync (check data on "
+"both sides)."
+msgstr "告訴守護程式，下次熱同步時應該執行完整同步（檢查兩邊的資料）。"
+
+#: kpilot/kpilot.cpp:541
+msgid "&Backup"
+msgstr "備份(&B)"
+
+#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
+msgid "Next HotSync will be backup."
+msgstr "下一次熱同步將執行備份。"
+
+#: kpilot/kpilot.cpp:545
+msgid ""
+"Tell the daemon that the next HotSync should back up the Handheld to the PC."
+msgstr "告訴守護程式，下次熱同步時應該將掌上型裝置的資料備份到 PC 上。"
+
+#: kpilot/kpilot.cpp:549
+msgid "&Restore"
+msgstr "回復(&R)"
+
+#: kpilot/kpilot.cpp:552
+msgid "Next HotSync will be restore."
+msgstr "下一次熱同步將執行回復。"
+
+#: kpilot/kpilot.cpp:553
+msgid ""
+"Tell the daemon that the next HotSync should restore the Handheld from data "
+"on the PC."
+msgstr "告訴守護程式，下次熱同步時應該將 PC 上的備份資料回復到掌上型裝置上。"
+
+#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
+#: lib/syncAction.cpp:207
+#, no-c-format
+msgid "Copy Handheld to PC"
+msgstr "從掌上型裝置複製到 PC"
+
+#: kpilot/kpilot.cpp:561
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the Handheld "
+"to the PC, overwriting entries on the PC."
+msgstr ""
+"告訴守護程式，下次熱同步時應該將掌上型裝置的所有資料複製到 PC 上，並覆寫在 "
+"PC 上現有的項目。"
+
+#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
+#: lib/syncAction.cpp:206
+#, no-c-format
+msgid "Copy PC to Handheld"
+msgstr "從 PC 複製到掌上型裝置"
+
+#: kpilot/kpilot.cpp:569
+msgid "Next HotSync will copy PC to Handheld."
+msgstr "下一次熱同步將從 PC 複製到掌上型裝置。"
+
+#: kpilot/kpilot.cpp:570
+msgid ""
+"Tell the daemon that the next HotSync should copy all data from the PC to "
+"the Handheld, overwriting entries on the Handheld."
+msgstr ""
+"告訴守護程式，下次熱同步時應該將 PC 上的所有資料複製到掌上型裝置上，並覆寫在"
+"掌上型裝置上現有的項目。"
+
+#: kpilot/kpilot.cpp:577
+msgid "&List Only"
+msgstr "只列出(&L)"
+
+#: kpilot/kpilot.cpp:580
+msgid "Next HotSync will list databases."
+msgstr "下一次熱同步將只列出資料庫。"
+
+#: kpilot/kpilot.cpp:581
+msgid ""
+"Tell the daemon that the next HotSync should just list the files on the "
+"Handheld and do nothing else."
+msgstr "告訴守護程式，下次熱同步時只要列出在掌上型清單中的檔案即可。"
+
+#: kpilot/kpilot.cpp:588
+msgid "Rese&t Link"
+msgstr "重置連結(&T)"
+
+#: kpilot/kpilot.cpp:591
+msgid "Reset the device connection."
+msgstr "重置與裝置的連結。"
+
+#: kpilot/kpilot.cpp:592
+msgid "Try to reset the daemon and its connection to the Handheld."
+msgstr "試著重置守護程式及與掌上型裝置的連結。"
+
+#: kpilot/kpilot.cpp:597
+msgid "Quit KPilot, (and stop the daemon if configured that way)."
+msgstr "離開 KPilot（並依據設定決定是否停止守護程式）。"
+
+#: kpilot/kpilot.cpp:613
+msgid "Configuration &Wizard..."
+msgstr "組態精靈(&W)..."
+
+#: kpilot/kpilot.cpp:616
+msgid "Configure KPilot using the configuration wizard."
+msgstr "使用組態精靈來設定 KPilot。"
+
+#: kpilot/kpilot.cpp:851
+msgid ""
+"The library containing the configuration wizard for KPilot could not be "
+"loaded, and the wizard is not available. Please try to use the regular "
+"configuration dialog."
+msgstr "無法載入 KPilot 組態精靈的函式庫，因此無法啟動精靈。請使用設定對話框。"
+
+#: kpilot/kpilot.cpp:854
+msgid "Wizard Not Available"
+msgstr "無法使用精靈"
+
+#: kpilot/kpilot.cpp:898
+msgid "Changed username to `%1'."
+msgstr "變更使用者名稱為 %1。"
+
+#: kpilot/kpilot.cpp:927
+msgid ""
+"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
+"busy)."
+msgstr "目前無法執行 KPilot 組態精靈（KPilot 的使用者介面正在忙碌中）。"
+
+#: kpilot/kpilot.cpp:951
+msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
+msgstr "目前無法設定 KPilot（KPilot 的使用者介面正在忙碌中）。"
+
+#: kpilot/kpilot.cpp:991
+msgid "Setup the Pilot device, conduits and other parameters"
+msgstr "設定 Pilot 裝置、導管與其他參數"
+
+#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
+msgid "Set debugging level"
+msgstr "設定除錯等級"
+
+#: kpilot/kpilot.cpp:1015
+msgid "KPilot"
+msgstr "KPilot"
+
+#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
+msgid "Project Leader"
+msgstr "專案領導者"
+
+#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
+msgid "Core and conduits developer"
+msgstr "核心與導管開發者"
+
+#: kpilot/kpilot.cpp:1034
+msgid "VCal conduit"
+msgstr "VCal 導管"
+
+#: kpilot/kpilot.cpp:1035
+msgid "Abbrowser conduit"
+msgstr "Abbrowser 導管"
+
+#: kpilot/kpilot.cpp:1036
+msgid "Expenses conduit"
+msgstr "Expense 導管"
+
+#: kpilot/kpilot.cpp:1037
+msgid "Notepad conduit, Bugfixer"
+msgstr "筆記本導管，錯誤修正"
+
+#: kpilot/kpilot.cpp:1041
+msgid "XML GUI"
+msgstr "XML 使用者介面"
+
+#: kpilot/kpilot.cpp:1044
+msgid ".ui files"
+msgstr ".ui 檔"
+
+#: kpilot/kpilot.cpp:1046
+msgid "Bugfixer, coolness"
+msgstr "錯誤修正"
+
+#: kpilot/kpilot.cpp:1048
+msgid "VCalconduit state machine, CMake"
+msgstr "VCalconduit 狀態機器，CMake"
+
+#: kpilot/kpilotConfig.cpp:163
+msgid "The configuration file is outdated."
+msgstr "此設定檔已過期。"
+
+#: kpilot/kpilotConfig.cpp:165
+msgid "The configuration file has version %1, while KPilot needs version %2."
+msgstr "設定檔的版本為 %1，但 KPilot 需要版本 %2。"
+
+#: kpilot/kpilotConfig.cpp:170
+msgid ""
+"Please run KPilot and check the configuration carefully to update the file."
+msgstr "請執行 KPilot 並小心檢查組態設定的更新。"
+
+#: kpilot/kpilotConfig.cpp:174
+msgid "Important changes to watch for are:"
+msgstr "您應該檢查一些重要的變更，如："
+
+#: kpilot/kpilotConfig.cpp:178
+msgid ""
+"Renamed conduits, Kroupware and file installer have been made conduits as "
+"well."
+msgstr "導管重命名、Kroupware、以及檔案安裝器也做成導管了。"
+
+#: kpilot/kpilotConfig.cpp:181
+msgid "Conflict resolution is now a global setting."
+msgstr "解決衝突現在移到了全域設定。"
+
+#: kpilot/kpilotConfig.cpp:186
+msgid "Changed format of no-backup databases."
+msgstr "改變無備份資料庫的格式。"
+
+#: kpilot/kpilotConfig.cpp:199
+msgid ""
+"The configuration file for KPilot is out-of date. Please run KPilot to "
+"update it."
+msgstr "KPilot 的設定檔已過期。請執行 KPilot 以更新。"
+
+#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
+msgid "Configuration File Out-of Date"
+msgstr "設定檔已過期"
+
+#: kpilot/kpilotConfig.cpp:220
+msgid ""
+"The settings for the file installer have been moved to the conduits "
+"configuration. Check the installed conduits list."
+msgstr "此檔案安裝器的設定已經移到了導管設定。請檢查已安裝的導管清單。"
+
+#: kpilot/kpilotConfig.cpp:223
+msgid "Settings Updated"
+msgstr "設定已更新"
+
+#: kpilot/kpilotConfig.cpp:248
+msgid ""
+"<qt>The following old conduits were found on your system. It is a good idea "
+"to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
+msgstr ""
+"<qt>在您的系統上發現了以下的舊導管。建議您將相關的 <tt>.la</tt> 與 <tt>."
+"so.0</tt> 檔案移除。</qt>"
+
+#: kpilot/kpilotConfig.cpp:253
+msgid "Old Conduits Found"
+msgstr "找到舊導管"
+
+#: kpilot/kpilotConfig.cpp:285
+msgid ""
+"<qt>The no backup databases listed in your configuration file have been "
+"adjusted to the new format. Database creator IDs have been changed to use "
+"square brackets []."
+msgstr ""
+"<qt>列在您的設定檔中的無備份資料庫已經調整為新的格式。資料庫建立者代碼已經改"
+"為用方括號 [] 括起來。"
+
+#: kpilot/kpilotConfig.cpp:289
+msgid "No Backup Databases Updated"
+msgstr "無備份資料庫已更新"
+
+#: kpilot/kpilotConfig.cpp:310
+msgid ""
+"KPilot is not configured for use. You may use the configuration wizard or "
+"the normal configure dialog to configure KPilot."
+msgstr ""
+"KPilot 設未設定完成。您可以用組態精靈，或是一般的設定對話框來設定 KPilot。"
+
+#: kpilot/kpilotConfig.cpp:313
+msgid "Not Configured"
+msgstr "尚未設定"
+
+#: kpilot/kpilotConfig.cpp:314
+msgid "Use &Wizard"
+msgstr "使用精靈(&W)"
+
+#: kpilot/kpilotConfig.cpp:315
+msgid "Use &Dialog"
+msgstr "使用對話框(&D)"
+
+#: kpilot/kpilotConfig.cpp:323
+msgid ""
+"The configuration file for KPilot is out-of date. KPilot can update some "
+"parts of the configuration automatically. Do you wish to continue?"
+msgstr ""
+"KPilot 的設定檔已過期。KPilot 可以自動更新設定檔中的某些部份。您要繼續嗎？"
+
+#: kpilot/kpilotConfigDialog.cpp:68
+msgid ""
+"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
+"want to save the changes before continuing?</qt>"
+msgstr "<qt>設定頁 <i>%1</i> 中的設定已變更。您要儲存變更嗎？</qt>"
+
+#: kpilot/kpilotConfigDialog.cpp:145
+msgid ""
+"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
+"This is probably unsupported and can cause problems. Are you sure you want "
+"to use this device name?</qt>"
+msgstr ""
+"<qt>您輸入的裝置名稱（<i>%1</i>）超過了 13 個字元，可能無法支援並會產生問題。"
+"您確定要使用此裝置名稱嗎？</qt>"
+
+#: kpilot/kpilotConfigDialog.cpp:150
+msgid "Device Name too Long"
+msgstr "裝置名稱過長"
+
+#: kpilot/kpilotConfigDialog.cpp:150
+msgid "Use"
+msgstr "使用"
+
+#: kpilot/kpilotConfigDialog.cpp:150
+msgid "Do Not Use"
+msgstr "不使用"
+
+#: kpilot/kpilotConfigWizard.cpp:62
+msgid "Pilot Info"
+msgstr "Pilot 資訊"
+
+#: kpilot/kpilotConfigWizard.cpp:64
+msgid "Application to Sync With"
+msgstr "要同步的應用程式"
+
+#: kpilot/kpilotConfigWizard.cpp:127
+msgid "general TDE-PIM"
+msgstr "一般 TDE 個人資訊管理"
+
+#: kpilot/kpilotConfigWizard.cpp:133
+msgid ""
+"_: Gnome's PIM suite\n"
+"Evolution"
+msgstr "Evolution"
+
+#: kpilot/kpilotConfigWizard.cpp:157
+msgid ""
+"KPilot cannot yet synchronize the addressbook with Evolution, so the "
+"addressbook conduit was disabled.\n"
+"When syncing the calendar or to-do list using KPilot please quit Evolution "
+"before the sync, otherwise you will lose data."
+msgstr ""
+"KPilot 目前還無法與 Evolution 的通訊錄同步，因此通訊錄導管已被關閉。若要使用 "
+"KPilot 來同步行事曆或待辦事項，請先離開 Evolution，以避免資料流失。"
+
+#: kpilot/kpilotConfigWizard.cpp:157
+msgid "Restrictions with Evolution"
+msgstr "Evolution 的限制"
+
+#: kpilot/kpilotConfigWizard.cpp:162
+msgid ""
+"_: Kpilot will sync with nothing\n"
+"nothing (it will backup only)"
+msgstr "無（只做備份）"
+
+#: kpilot/kpilotConfigWizard.cpp:166
+msgid ""
+"_: TDE's PIM suite\n"
+"Kontact"
+msgstr "Kontact"
+
+#: kpilot/kpilotConfigWizard.cpp:200
+#, c-format
+msgid "KPilot is now configured to sync with %1."
+msgstr "KPilot 目前設定與 %1 同步。"
+
+#: kpilot/kpilotConfigWizard.cpp:205
+msgid ""
+"The remaining options in the config dialog are advanced options and can be "
+"used to fine-tune KPilot."
+msgstr "設定對話框中的其它選項是進階選項，可用於微調 KPilot。"
+
+#: kpilot/kpilotConfigWizard.cpp:210
+msgid "Automatic Configuration Finished"
+msgstr "自動組態設定已完成"
+
+#: kpilot/kpilotConfigWizard.cpp:217
+msgid ""
+"Please put the handheld in the cradle, press the hotsync button and click on "
+"\"Continue\".\n"
+"\n"
+"Some kernel versions (Linux 2.6.x) have problems with the visor kernel "
+"module (for Sony Clie devices). Running an autodetection in that case might "
+"block the computer from doing hotsyncs until it is rebooted. In that case it "
+"might be advisable not to continue."
+msgstr ""
+"請將掌上型裝置放於架上，按下熱同步鍵，並點選「繼續」。\n"
+"\n"
+"有些核心版本（Linux 2.6.x）的 visor 模組（Sony Clie 裝置用的）有些問題。若使"
+"用該模組執行自動偵測可能會鎖住電腦無法執行熱同步，直到重開機為止。若是這種狀"
+"況，最好不要繼續。"
+
+#: kpilot/kpilotConfigWizard.cpp:223
+msgid "Handheld Detection"
+msgstr "偵測掌上型裝置"
+
+#: kpilot/kpilotProbeDialog.cpp:90
+msgid "Autodetecting Your Handheld"
+msgstr "自動偵測您的掌上型裝置"
+
+#: kpilot/kpilotProbeDialog.cpp:90
+msgid "Restart Detection"
+msgstr "重新開始偵測"
+
+#: kpilot/kpilotProbeDialog.cpp:97
+msgid ""
+"KPilot is now trying to automatically detect the device of your handheld. "
+"Please press the hotsync button if you have not done so already."
+msgstr ""
+"KPilot 現在正試著自動偵測您的掌上型裝置。如果您尚未執行，請按下熱同步鍵。"
+
+#: kpilot/kpilotProbeDialog.cpp:100
+msgid "Status"
+msgstr "狀態"
+
+#: kpilot/kpilotProbeDialog.cpp:104
+msgid "Autodetection not yet started..."
+msgstr "自動偵測尚未開始..."
+
+#: kpilot/kpilotProbeDialog.cpp:113
+msgid "Detected Values"
+msgstr "偵測值"
+
+#: kpilot/kpilotProbeDialog.cpp:119
+msgid "Handheld user:"
+msgstr "掌上型裝置使用者："
+
+#: kpilot/kpilotProbeDialog.cpp:123
+msgid "Device:"
+msgstr "裝置："
+
+#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
+msgid "[Not yet known]"
+msgstr "【尚未知】"
+
+#: kpilot/kpilotProbeDialog.cpp:195
+msgid "Starting detection..."
+msgstr "開始偵測..."
+
+#: kpilot/kpilotProbeDialog.cpp:233
+msgid "Waiting for handheld to connect..."
+msgstr "等待掌上型裝置連線..."
+
+#: kpilot/kpilotProbeDialog.cpp:266
+msgid "Timeout reached, could not detect a handheld."
+msgstr "已逾時，無法偵測到掌上型裝置。"
+
+#: kpilot/kpilotProbeDialog.cpp:267
+msgid ""
+"<qt>A handheld could not be detected. Possible check the following things:</"
+"p><ul><li> Have you pressed the hotsync button on the handheld?\n"
+"<li> Make sure the device sits in the cradle correctly.\n"
+"<li> Make sure the cradle is correctly plugged in to the computer.\n"
+"<li> Have you checked that your device is actually supported by kpilot (see "
+"http://www.kpilot.org).\n"
+"</ul>"
+msgstr ""
+"<qt><p>無法偵測到掌上型裝置。請檢查下列事項：</p> <ul> <li>您是否已按下了掌上"
+"型裝置上的熱同步鍵？\n"
+"<li>請確認此裝置已正確地放置在架上。\n"
+"<li>請確定裝置架已正確地連線到電腦上。\n"
+"<li>您是否確定 KPilot 支援您的裝置？（請參考 http://www.kpilot.org）\n"
+"</ul>"
+
+#: kpilot/kpilotProbeDialog.cpp:273
+msgid "Automatic Detection Failed"
+msgstr "自動偵測失敗"
+
+#: kpilot/kpilotProbeDialog.cpp:288
+#, c-format
+msgid "Found a connected device on %1"
+msgstr "在 %1 找到一個已連線的裝置"
+
+#: kpilot/kpilotProbeDialog.cpp:338
+msgid "Disconnected from all devices"
+msgstr "中斷與所有裝置的連線"
+
+#: kpilot/kroupware.cpp:126
+msgid "Syncing to-dos with KMail"
+msgstr "與 KMail 同步待辦事項"
+
+#: kpilot/kroupware.cpp:135
+msgid "Syncing calendar with KMail"
+msgstr "與 KMail 同步行事曆"
+
+#: kpilot/kroupware.cpp:177
+msgid "Syncing Notes with Mail"
+msgstr "與 KMail 同步備忘錄"
+
+#: kpilot/kroupware.cpp:188
+msgid "Rewriting to-dos to KMail..."
+msgstr "重新將待辦事項寫入 KMail..."
+
+#: kpilot/kroupware.cpp:195
+msgid "Rewriting Calendar to KMail"
+msgstr "重新將行事曆寫入 KMail..."
+
+#: kpilot/kroupware.cpp:230
+msgid "Syncing KMail with Addresses "
+msgstr "同步 KMail 與通訊錄中"
+
+#: kpilot/kroupware.cpp:259
+msgid "Syncing KMail with Notes"
+msgstr "同步 KMail 與備忘錄中"
+
+#: kpilot/logFile.cpp:97 lib/actions.cpp:134
+msgid "HotSync finished."
+msgstr "熱同步已完成."
+
+#: kpilot/logWidget.cpp:90
+msgid ""
+"<qt>This lists all the messages received during the current HotSync</qt>"
+msgstr "<qt>這裡列出所有熱同步期間接收到的訊息</qt>"
+
+#: kpilot/logWidget.cpp:119
+msgid "<qt><b>HotSync Log</b></qt>"
+msgstr "<qt><b>熱同步紀錄</b></qt>"
+
+#: kpilot/logWidget.cpp:134
+msgid ""
+"_: Clear the text of HotSync messages\n"
+"Clear Log"
+msgstr "清除紀錄"
+
+#: kpilot/logWidget.cpp:136
+msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
+msgstr "<qt>清除目前熱同步的訊息清單。</qt>"
+
+#: kpilot/logWidget.cpp:140
+msgid "Save Log..."
+msgstr "儲存紀錄..."
+
+#: kpilot/logWidget.cpp:141
+msgid ""
+"<qt>You can save the list of messages received during this HotSync to a file "
+"(for example for use in a bug report) by clicking here.</qt>"
+msgstr ""
+"<qt>您可以點選這裡，以將目前熱同步期間所接收到的訊息清單儲存到檔案中（可以用"
+"於回報錯誤）。</qt>"
+
+#: kpilot/logWidget.cpp:150
+msgid "Sync progress:"
+msgstr "同步進度："
+
+#: kpilot/logWidget.cpp:153
+msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
+msgstr "<qt>目前熱同步已完成的百分比（估計值）</qt>"
+
+#: kpilot/logWidget.cpp:270
+msgid "<b>HotSync Finished.</b>"
+msgstr "<b>熱同步已完成。</b>"
+
+#: kpilot/logWidget.cpp:334
+msgid "Save Log"
+msgstr "儲存紀錄"
+
+#: kpilot/logWidget.cpp:341
+msgid "The file exists. Do you want to overwrite it?"
+msgstr "檔案已存在。您要覆寫它嗎？"
+
+#: kpilot/logWidget.cpp:343
+msgid "File Exists"
+msgstr "檔案已存在"
+
+#: kpilot/logWidget.cpp:343
+msgid "Do Not Overwrite"
+msgstr "不要覆寫"
+
+#: kpilot/logWidget.cpp:367
+msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
+msgstr "<qt>無法開啟檔案 %1 以寫入。要再試一次嗎？</qt>"
+
+#: kpilot/logWidget.cpp:369
+msgid "Cannot Save"
+msgstr "無法儲存"
+
+#: kpilot/logWidget.cpp:369
+msgid "Try Again"
+msgstr "再試一次"
+
+#: kpilot/logWidget.cpp:369
+msgid "Do Not Try"
+msgstr "不要嘗試"
+
+#: kpilot/main-test.cpp:66
+msgid "Path to Pilot device node"
+msgstr "Pilot 裝置路徑"
+
+#: kpilot/main-test.cpp:69
+msgid "List DBs"
+msgstr "列出資料庫"
+
+#: kpilot/main-test.cpp:71
+msgid "Backup Pilot to <dest dir>"
+msgstr "備份 Pilot 到【目標目錄】"
+
+#: kpilot/main-test.cpp:73
+msgid "Restore Pilot from backup"
+msgstr "從備份還原 Pilot"
+
+#: kpilot/main-test.cpp:76
+msgid "Run conduit from desktop file <filename>"
+msgstr "從 desktop 檔案 <filename> 中執行導管"
+
+#: kpilot/main-test.cpp:80
+msgid "Run a specific check (with the device)"
+msgstr "（對裝置）執行特定的檢查"
+
+#: kpilot/main-test.cpp:83
+msgid "Show KPilot configuration information"
+msgstr "顯示 KPilot 設定資訊"
+
+#: kpilot/main-test.cpp:86
+msgid "Set the debug level"
+msgstr "設定除錯等級"
+
+#: kpilot/main-test.cpp:94
+msgid "*Really* run the conduit, not in test mode."
+msgstr "【實際】執行導管，而非測試模式。"
+
+#: kpilot/main-test.cpp:98
+msgid "Run the conduit in file-test mode."
+msgstr "以檔案測試模式執行導管。"
+
+#: kpilot/main-test.cpp:101
+msgid "Copy Pilot to Desktop."
+msgstr "複製 Pilot 到桌面。"
+
+#: kpilot/main-test.cpp:104
+msgid "Copy Desktop to Pilot."
+msgstr "複製桌面到.Pilot。"
+
+#: kpilot/main-test.cpp:107
+msgid "Repeated perform action - only useful for --list"
+msgstr "重複執行動作，只對 --list 有用"
+
+#: kpilot/main-test.cpp:347
+msgid "KPilotTest"
+msgstr "KPilotTest"
+
+#: kpilot/main-test.cpp:352
+msgid "KPilot Maintainer"
+msgstr "KPilot 維護者"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:38
+#: conduits/docconduit/doc-setupdialog.ui:43
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:28 conduits/knotes/setup_base.ui:34
+#: conduits/malconduit/mal-setup_dialog.ui:38
+#: conduits/memofileconduit/setup_base.ui:68
+#: conduits/notepadconduit/notepad-setup.ui:32 conduits/null/setup_base.ui:68
+#: conduits/recordconduit/setup_base.ui:68
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
+#: conduits/timeconduit/time-setup_dialog.ui:35
+#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
+#, no-c-format
+msgid "General"
+msgstr "一般"
+
+#: kpilot/main-test.cpp:359
+msgid "Conduit Actions"
+msgstr "導管動作"
+
+#: kpilot/memoWidget.cpp:234
+msgid ""
+"Select the category of addresses\n"
+"to display here."
+msgstr "選擇要在此顯示的通訊錄類別。"
+
+#: kpilot/memoWidget.cpp:237
+msgid "Memos:"
+msgstr "備忘錄："
+
+#: kpilot/memoWidget.cpp:249
+msgid ""
+"This list displays all the memos\n"
+"in the selected category. Click on\n"
+"one to display it to the right."
+msgstr ""
+"此清單顯示所選類別的所有備忘錄。\n"
+"點選其中一個，可以在右邊顯示。"
+
+#: kpilot/memoWidget.cpp:253
+msgid "Memo text:"
+msgstr "備忘錄文字："
+
+#: kpilot/memoWidget.cpp:261
+msgid "The text of the selected memo appears here."
+msgstr "所選取的備忘錄中的文字顯示在這裡。"
+
+#: kpilot/memoWidget.cpp:264
+msgid "Import Memo..."
+msgstr "匯入備忘錄..."
+
+#: kpilot/memoWidget.cpp:268
+msgid "Read a text file and add it to the Pilot's memo database."
+msgstr "讀取文字檔，並新增到 Pilot 的備忘資料庫。"
+
+#: kpilot/memoWidget.cpp:269
+msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉匯入功能。</i></qt>"
+
+#: kpilot/memoWidget.cpp:272
+msgid "Export Memo..."
+msgstr "匯出備忘錄..."
+
+#: kpilot/memoWidget.cpp:277
+msgid "Write the selected memo to a file."
+msgstr "將所選取的備忘錄寫入到檔案。"
+
+#: kpilot/memoWidget.cpp:279
+msgid "Delete Memo"
+msgstr "刪除備忘錄"
+
+#: kpilot/memoWidget.cpp:284
+msgid "Delete the selected memo."
+msgstr "刪除所選取的備忘錄。"
+
+#: kpilot/memoWidget.cpp:288
+msgid "Add Memo"
+msgstr "新增備忘錄"
+
+#: kpilot/memoWidget.cpp:291
+msgid "Add a new memo to the database."
+msgstr "新增新的備忘錄到資料庫中。"
+
+#: kpilot/memoWidget.cpp:343
+msgid "Delete currently selected memo?"
+msgstr "要刪除所選取的備忘錄嗎？"
+
+#: kpilot/memoWidget.cpp:344
+msgid "Delete Memo?"
+msgstr "刪除備忘錄？"
+
+#: kpilot/memoWidget.cpp:367
+msgid "Cannot open MemoDB to delete record."
+msgstr "無法開啟備忘錄資料庫以刪除紀錄。"
+
+#: kpilot/memoWidget.cpp:368
+msgid "Cannot Delete Memo"
+msgstr "無法刪除備忘錄"
+
+#: kpilot/pilotComponent.cpp:153
+msgid "All"
+msgstr "全部"
+
+#: kpilot/pilotDaemon.cpp:157
+msgid "Start &KPilot"
+msgstr "啟動 KPilot(&K)"
+
+#: kpilot/pilotDaemon.cpp:159
+msgid "&Configure KPilot..."
+msgstr "設定 KPilot(&C)..."
+
+#: kpilot/pilotDaemon.cpp:164
+msgid ""
+"_: Appended to names of sync types to indicate the sync will happen just one "
+"time\n"
+" (once)"
+msgstr "（只做一次）"
+
+#: kpilot/pilotDaemon.cpp:168
+msgid "Default (%1)"
+msgstr "預設（%1）"
+
+#: kpilot/pilotDaemon.cpp:185
+msgid "Next &Sync"
+msgstr "下一次同步(&S)"
+
+#: kpilot/pilotDaemon.cpp:670
+msgid "Next HotSync will be: %1. "
+msgstr "下一次熱同步將是：%1。"
+
+#: kpilot/pilotDaemon.cpp:902
+msgid "HotSync is disabled while the screen is locked."
+msgstr "螢幕鎖定時，熱同步會被關閉。"
+
+#: kpilot/pilotDaemon.cpp:907
+msgid ""
+"HotSync is disabled because KPilot could not determine the state of the "
+"screen saver. You can disable this security feature by unchecking the 'do "
+"not sync when screensaver is active' box in the HotSync page of the "
+"configuration dialog."
+msgstr ""
+"熱同步會被關閉，因為 KPilot 無法決定螢幕保護程式的狀態。若您堅持要這樣做，您"
+"可以在設定對話框中的「熱同步」頁中，取消勾選「螢幕保護程式啟動時不要同步」。"
+
+#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
+msgid "HotSync Completed.<br>"
+msgstr "熱同步已完成<br>"
+
+#: kpilot/pilotDaemon.cpp:1274
+#, c-format
+msgid "Next sync is %1."
+msgstr "下一次同步是 %1。"
+
+#: kpilot/pilotDaemon.cpp:1298
+msgid "Device to try first"
+msgstr "先試的裝置"
+
+#: kpilot/pilotDaemon.cpp:1299
+msgid "Exit instead of complaining about bad configuration files"
+msgstr "若是設定檔有問題，則離開而不抱怨。"
+
+#: kpilot/pilotDaemon.cpp:1311
+msgid "KPilot Daemon"
+msgstr "KPilot 守護程式"
+
+#: kpilot/pilotDaemon.cpp:1326
+msgid "Developer"
+msgstr "開發者"
+
+#: kpilot/todoEditor.cpp:48
+msgid "To-do Editor"
+msgstr "待辦事項編輯器"
+
+#: kpilot/todoWidget.cpp:174
+msgid "There are still %1 to-do editing windows open."
+msgstr "目前仍開著 %1 待辦事項視窗。"
+
+#: kpilot/todoWidget.cpp:178
+#, c-format
+msgid ""
+"_n: There is still a to-do editing window open.\n"
+"There are still %n to-do editing windows open."
+msgstr "目前仍開著 %n 個待辦事項視窗。"
+
+#: kpilot/todoWidget.cpp:218
+msgid "<qt>Select the category of to-dos to display here.</qt>"
+msgstr "<qt>選取要在此顯示的待辦事項類別。</qt>"
+
+#: kpilot/todoWidget.cpp:225
+msgid "To-do Item"
+msgstr "待辦事項項目"
+
+#: kpilot/todoWidget.cpp:243
+msgid ""
+"<qt>This list displays all the to-dos in the selected category. Click on one "
+"to display it to the right.</qt>"
+msgstr ""
+"<qt>這個清單顯示所選取類別的所有待辦事項。點選其中一個，可以在右邊顯示。</qt>"
+
+#: kpilot/todoWidget.cpp:247
+msgid "To-do info:"
+msgstr "待辦事項資訊："
+
+#: kpilot/todoWidget.cpp:262
+msgid "<qt>You can edit a to-do when it is selected.</qt>"
+msgstr "<qt>您可以選取並編輯待辦事項。</qt>"
+
+#: kpilot/todoWidget.cpp:270
+msgid "<qt>Add a new to-do to the to-do list.</qt>"
+msgstr "<qt>新增待辦事項到清單中。</qt>"
+
+#: kpilot/todoWidget.cpp:271
+msgid ""
+"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
+"qt>"
+msgstr "<qt><i>「內部編輯器」設定關閉新增待辦事項功能。</i></qt>"
+
+#: kpilot/todoWidget.cpp:280
+msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
+msgstr "<qt>從清單中刪除所選取的待辦事項。</qt>"
+
+#: kpilot/todoWidget.cpp:408
+msgid ""
+"You cannot add to-dos to the to-do list until you have done a HotSync at "
+"least once to retrieve the database layout from your Pilot."
+msgstr ""
+"您必須至少執行一次熱同步，從您的 Pilot 上取得資料庫佈局之後，您才能夠開始新增"
+"待辦事項。"
+
+#: kpilot/todoWidget.cpp:411
+msgid "Cannot Add New To-do"
+msgstr "無法新增待辦事項"
+
+#: lib/actionQueue.cpp:136
+msgid ""
+"The connection to the handheld was lost. Synchronization cannot continue."
+msgstr "已遺失與掌上型裝置的連線。無法繼續同步。"
+
+#: lib/actions.cpp:54
+msgid "KPilot %1 HotSync starting...\n"
+msgstr "KPilot %1 熱同步開始...\n"
+
+#: lib/actions.cpp:56
+msgid "Using encoding %1 on the handheld."
+msgstr "在掌上型裝置使用編碼 %1。"
+
+#: lib/actions.cpp:67
+msgid "KPilot is busy and cannot process the HotSync right now."
+msgstr "KPilot 忙碌中，無法即時處理熱同步。"
+
+#: lib/actions.cpp:114
+msgid "Testing.\n"
+msgstr "測試中。\n"
+
+#: lib/actions.cpp:130
+msgid "Syncing database %1..."
+msgstr "同步資料庫 %1..."
+
+#: lib/kpilotdevicelink.cpp:148
+msgid "Could not open device: %1 (will retry)"
+msgstr "無法開啟裝置：%1（會再重試）"
+
+#: lib/kpilotdevicelink.cpp:187
+msgid "Trying to open device %1..."
+msgstr "試著開啟裝置 %1..."
+
+#: lib/kpilotdevicelink.cpp:241
+msgid "Already listening on that device"
+msgstr "該裝置已經開始運作了"
+
+#: lib/kpilotdevicelink.cpp:261
+msgid "Cannot create socket for communicating with the Pilot (%1)"
+msgstr "無法建立與 Pilot %1 連繫的 socket"
+
+#: lib/kpilotdevicelink.cpp:289
+msgid "Cannot open Pilot port \"%1\". "
+msgstr "無法開啟 Pilot 連接埠 %1。"
+
+#: lib/kpilotdevicelink.cpp:391
+msgid "Cannot listen on Pilot socket (%1)"
+msgstr "無法監聽 Pilot Socket（%1）"
+
+#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
+msgid "Cannot accept Pilot (%1)"
+msgstr "無法接收 Pilot（%1）"
+
+#: lib/kpilotdevicelink.cpp:427
+msgid "already connected"
+msgstr "已連線"
+
+#: lib/kpilotdevicelink.cpp:441
+msgid "Unable to read system information from Pilot"
+msgstr "無法從 Pilot 讀取系統資訊"
+
+#: lib/kpilotdevicelink.cpp:478
+msgid "Checking last PC..."
+msgstr "檢查上一個 PC..."
+
+#: lib/kpilotdevicelink.cpp:487
+msgid ""
+"Could not read user information from the Pilot. Perhaps you have a password "
+"set on the device?"
+msgstr "無法從 Pilot 讀取使用者資訊。也許您在該裝置上設了密碼？"
+
+#: lib/kpilotdevicelink.cpp:670
+msgid "The Pilot device is not configured yet."
+msgstr "尚未設定 Pilot 裝置。"
+
+#: lib/kpilotdevicelink.cpp:709
+msgid "Pilot device %1 is not read-write."
+msgstr "無法讀寫 Pilot 裝置 %1。"
+
+#: lib/kpilotdevicelink.cpp:719
+msgid ""
+"Pilot device %1 does not exist. Probably it is a USB device and will appear "
+"during a HotSync."
+msgstr "Pilot 裝置 %1 不存在。也許它是 USB 裝置，在熱同步時會出現。"
+
+#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
+msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
+msgstr "<qt>無法安裝檔案 %1。</qt>"
+
+#: lib/kpilotdevicelink.cpp:846
+msgid "End of HotSync\n"
+msgstr "熱同步結束\n"
+
+#: lib/kpilotdevicelinkPrivate.h:307
+msgid " The port does not exist."
+msgstr "此連接埠不存在。"
+
+#: lib/kpilotdevicelinkPrivate.h:310
+msgid " There is no such device."
+msgstr "找不到裝置。"
+
+#: lib/kpilotdevicelinkPrivate.h:313
+msgid " You do not have permission to open the Pilot device."
+msgstr "您沒有開啟 Pilot 裝置的權限。"
+
+#: lib/kpilotdevicelinkPrivate.h:317
+msgid " Check Pilot path and permissions."
+msgstr "請檢查 Pilot 路徑與權限。"
+
+#: lib/pilotDateEntry.cpp:179
+#, c-format
+msgid "Start date: %1"
+msgstr "開始日期：%1"
+
+#: lib/pilotDateEntry.cpp:185
+msgid "Whole-day event"
+msgstr "全天事件"
+
+#: lib/pilotDateEntry.cpp:193
+#, c-format
+msgid "End date: %1"
+msgstr "結束日期：%1"
+
+#: lib/pilotDateEntry.cpp:200
+msgid ""
+"_: %1 is the duration, %2 is the time unit\n"
+"Alarm: %1 %2 before event starts"
+msgstr "警告：%1 %2 在事件開始之前"
+
+#: lib/pilotDateEntry.cpp:204
+msgid "minutes"
+msgstr "分鐘"
+
+#: lib/pilotDateEntry.cpp:205
+msgid "hours"
+msgstr "小時"
+
+#: lib/pilotDateEntry.cpp:206
+msgid "days"
+msgstr "天"
+
+#: lib/pilotDateEntry.cpp:216
+msgid "Recurrence: every %1 %2"
+msgstr "循環：每 %1 %2"
+
+#: lib/pilotDateEntry.cpp:222
+msgid "day(s)"
+msgstr "天"
+
+#: lib/pilotDateEntry.cpp:223
+msgid "week(s)"
+msgstr "週"
+
+#: lib/pilotDateEntry.cpp:225
+msgid "month(s)"
+msgstr "月"
+
+#: lib/pilotDateEntry.cpp:226
+msgid "year(s)"
+msgstr "年"
+
+#: lib/pilotDateEntry.cpp:235
+msgid "Repeats indefinitely"
+msgstr "永遠重覆"
+
+#: lib/pilotDateEntry.cpp:240
+#, c-format
+msgid "Until %1"
+msgstr "直到 %1"
+
+#: lib/pilotDateEntry.cpp:244
+msgid "Repeating on the i-th day of week j"
+msgstr "在第幾週的第幾天重覆"
+
+#: lib/pilotDateEntry.cpp:245
+msgid "Repeating on the n-th day of the month"
+msgstr "在一個月裡的第幾天重覆"
+
+#: lib/pilotDateEntry.cpp:263
+msgid "Exceptions:"
+msgstr "例外："
+
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
+msgid "<b><em>Note:</em></b><br>"
+msgstr "<b><em>注意：</em></b><br>"
+
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
+msgid "Note:\n"
+msgstr "注意：\n"
+
+#: lib/pilotMemo.cpp:81
+msgid ""
+"<i>Title:</i> %1<br>\n"
+"<i>MemoText:</i><br>%2"
+msgstr ""
+"<i>標題：</i>%1<br>\n"
+"<i>備忘文字：</i><br>%2"
+
+#: lib/pilotMemo.cpp:86
+msgid ""
+"Title: %1\n"
+"MemoText:\n"
+"%2"
+msgstr ""
+"標題：%1\n"
+"備忘文字：\n"
+"%2"
+
+#: lib/pilotTodoEntry.cpp:133
+msgid "Completed"
+msgstr "已完成"
+
+#: lib/pilotTodoEntry.cpp:135
+msgid "Not completed"
+msgstr "未完成"
+
+#: lib/pilotTodoEntry.cpp:143
+#, c-format
+msgid "Due date: %1"
+msgstr "到期日：%1"
+
+#: lib/pilotTodoEntry.cpp:151
+#, c-format
+msgid "Priority: %1"
+msgstr "優先等級：%1"
+
+#: lib/plugin.cpp:73
+msgid "Unnamed"
+msgstr "未命名"
+
+#: lib/plugin.cpp:93
+msgid ""
+"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
+"the changes before continuing?</qt>"
+msgstr "<qt>導管 %1 的設定已變更。您要儲存此變更嗎？</qt>"
+
+#: lib/plugin.cpp:105
+msgid "%1 Conduit"
+msgstr "導管 %1"
+
+#: lib/plugin.cpp:144
+msgid "Send questions and comments to [email protected]"
+msgstr "請將問題與意見送到 [email protected]"
+
+#: lib/plugin.cpp:194
+msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
+msgstr "請將問題與意見送到 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cpp:198
+msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
+msgstr "請將錯誤回報到 <a href=\"mailto:%1\">%2</a>。"
+
+#: lib/plugin.cpp:202
+msgid ""
+"For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
+"\">KPilot User's Guide</a>."
+msgstr ""
+"關於商標資訊，請參考 <a href=\"help:/kpilot/trademarks.html\">KPilot 使用者指"
+"南</a>。"
+
+#: lib/plugin.cpp:213
+msgid "<b>Authors:</b> "
+msgstr "<b>作者：</b> "
+
+#: lib/plugin.cpp:234
+msgid "<b>Credits:</b> "
+msgstr "<b>致謝：</b> "
+
+#: lib/plugin.cpp:480
+msgid "Large Changes Detected"
+msgstr "偵測到許多變更"
+
+#: lib/plugin.cpp:482
+msgid ""
+"The %1 conduit has made a large number of changes to your %2.  Do you want "
+"to allow this change?\n"
+"Details:\n"
+"\t%3"
+msgstr ""
+"導管 %1 做了許多變更到您的 %2。您同意此變更嗎？\n"
+"詳情：\n"
+"\t%3"
+
+#: lib/plugin.cpp:536
+#, c-format
+msgid "Could not find conduit %1."
+msgstr "找不到導管 %1。"
+
+#: lib/plugin.cpp:559
+#, c-format
+msgid "Could not load conduit %1."
+msgstr "無法載入導管 %1。"
+
+#: lib/plugin.cpp:571
+msgid "Conduit %1 has wrong version (%2)."
+msgstr "導管 %1 的版本（%2）錯誤"
+
+#: lib/plugin.cpp:581
+#, c-format
+msgid "Could not initialize conduit %1."
+msgstr "無法初始化導管 %1。"
+
+#: lib/plugin.cpp:594 lib/plugin.cpp:603
+#, c-format
+msgid "Could not create conduit %1."
+msgstr "無法建立導管 %1。"
+
+#: lib/plugin.cpp:607
+msgid "[Conduit %1]"
+msgstr "【導管 %1】"
+
+#: lib/plugin.cpp:749
+msgid "Start: %1. End: %2. "
+msgstr "開始：%1，結束：%2。"
+
+#: lib/plugin.cpp:751
+msgid "%1 new. "
+msgstr "%1 新增。"
+
+#: lib/plugin.cpp:752
+msgid "%1 changed. "
+msgstr "%1 已變更。"
+
+#: lib/plugin.cpp:753
+msgid "%1 deleted. "
+msgstr "%1 已刪除。"
+
+#: lib/plugin.cpp:755
+msgid "No changes made. "
+msgstr "沒有做任何變更。"
+
+#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
+msgid "Unable to open the %1 database on the handheld."
+msgstr "無法在掌上型裝置開啟資料庫 %1。"
+
+#: lib/recordConduit.cpp:295
+#, c-format
+msgid "Unable to open %1."
+msgstr "無法開啟 %1。"
+
+#: lib/syncAction.cpp:103
+msgid "The conduit %1 could not be executed."
+msgstr "導管 %1 無法被執行。"
+
+#: lib/syncAction.cpp:205
+msgid "Full Synchronization"
+msgstr "完整同步"
+
+#: lib/syncAction.cpp:209
+msgid "Restore From Backup"
+msgstr "從備份還原"
+
+#: lib/syncAction.cpp:220
+msgid "Test Sync"
+msgstr "測試同步"
+
+#: lib/syncAction.cpp:224
+msgid "Local Sync"
+msgstr "本地端同步"
+
+#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
+msgid "Question"
+msgstr "問題"
+
+#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
+msgid "&Do not ask again"
+msgstr "不要再詢問我(&D)"
+
+#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
+msgid "Do not ask again"
+msgstr "不要再詢問"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:18
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:32
+#, no-c-format
+msgid "KPilot Custom Fields"
+msgstr "KPilot 自訂欄位"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:35
+#, no-c-format
+msgid ""
+"On your handheld, each address also provides four custom fields for your "
+"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
+"just store them as a custom field on your PC with no special meaning. In the "
+"last case, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+"在您的掌上型裝置上，每個位址會提供四個自訂欄位給您個人使用。KPilot 可以將這些"
+"欄位與生日、網址、即時通訊地址同步，或是單純儲存成自訂的值。在單純儲存成自訂"
+"值的狀況下，您可以在此修改它的值。不過要注意的是，對其它設定來講，此地輸入的"
+"值將沒有任何作用。"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:46
+#, no-c-format
+msgid "Custom &3:"
+msgstr "自訂 3(&3)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:52
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:74
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the third custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+"<qt>在此編輯或輸入第三個自訂欄位的值。若您使用 KPilot，您可以將這些值與掌上型"
+"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:60
+#, no-c-format
+msgid "Custom &4:"
+msgstr "自訂 4(&4)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:66
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:90
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+"<qt>在此編輯或輸入第四個自訂欄位的值。若您使用 KPilot，您可以將這些值與掌上型"
+"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:82
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:104
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the second custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+"<qt>在此編輯或輸入第二個自訂欄位的值。若您使用 KPilot，您可以將這些值與掌上型"
+"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:98
+#, no-c-format
+msgid "Custom &2:"
+msgstr "自訂 2(&2)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:112
+#, no-c-format
+msgid "Custom &1:"
+msgstr "自訂 1(&1)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:118
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:134
+#, no-c-format
+msgid ""
+"<qt>Edit or enter the value of the first custom field here. Using KPilot, "
+"you can synchronize these values with the handheld's Address application "
+"custom fields.</qt>"
+msgstr ""
+"<qt>在此編輯或輸入第一個自訂欄位的值。若您使用 KPilot，您可以將這些值與掌上型"
+"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:142
+#, no-c-format
+msgid ""
+"If you let KPilot sync the handheld's custom fields as custom fields on the "
+"PC, you can change the values here. Note, however, that for all other "
+"settings the values entered here will have no effect."
+msgstr ""
+"如果您打算使用 KPilot 將掌上型裝置裡的自訂欄位同步為 PC 上的自訂欄位，您可以"
+"在此變更這些值。不過要注意的是，對其它設定來講，此地輸入的值將沒有任何作用。"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:158
+#, no-c-format
+msgid "KPilot's Private (meta-sync) Settings"
+msgstr "KPilot 的私人（meta-sync）設定"
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:169
+#, no-c-format
+msgid "Record&ID:"
+msgstr "紀錄代碼(&I)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:180
+#, no-c-format
+msgid "Sync &flag:"
+msgstr "同步旗標(&F)："
+
+#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:225
+#, no-c-format
+msgid ""
+"These values indicate the state of the record for KPilot, and connect an "
+"entry on the handheld with an entry on the PC.\n"
+"Do NOT change these values: doing so will almost certainly result in data "
+"loss when you next do a sync."
+msgstr ""
+"這些值表示 KPilot 的紀錄狀態，並將 PC 上的項目與掌上型裝置的項目連接起來。請"
+"不要變更這些值，如此會導致在下一次同步時資料遺失。"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:66
+#: conduits/vcalconduit/korganizerConduit.ui:94
+#, no-c-format
+msgid "Sync Destination"
+msgstr "同步目的地"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:77
+#, no-c-format
+msgid "&Standard addressbook"
+msgstr "標準通訊錄(&S)"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:80
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. "
+"the addressbook that you edit in KAddressBook, and which you use in KMail)</"
+"qt>"
+msgstr ""
+"<qt>選擇此選項的話，會與 TDE 的標準通訊錄（也就是 KAddressBook 與 KMail 中使"
+"用的通訊錄）同步。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:91
+#, no-c-format
+msgid "vCard &file:"
+msgstr "vCard 檔案(&F)："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:94
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific address book file, instead of the "
+"standard TDE address book. This file must be in the vCard format (.vcf). "
+"Type the location of this file in the edit box or select it clicking the "
+"file picker button.</qt>"
+msgstr ""
+"<qt>選擇此選項的話，會使用特別的通訊錄檔案，而不使用標準 TDE 通訊錄來同步。這"
+"個檔必須是 vCard 格式（.vcf）。您可以在此輸入此檔案的位置，或直接點選檔案挑選"
+"器按鈕來挑選。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:113
+#, no-c-format
+msgid ""
+"<qt>Enter the vCard file name here or select it by clicking the file picker "
+"button. vCard is a standard format for exchanging contact information. </qt>"
+msgstr ""
+"<qt>您可以在此輸入 vCard 檔案的名稱，或直接點選檔案挑選器按鈕來挑選。vCard 是"
+"交換聯絡人資訊時的標準格式。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:123
+#, no-c-format
+msgid "Store &archived records in the TDE addressbook"
+msgstr "在 TDE 通訊錄中儲存已歸檔的紀錄(&A)"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:126
+#, no-c-format
+msgid ""
+"<qt>If you delete an address on your handheld, you can determine if it "
+"should be archived on the PC. If you check that and this checkbox, the "
+"address will be added to your addressbook, but no longer synchronized with "
+"the handheld.</qt>"
+msgstr ""
+"<qt>如果您從您的掌上型裝置中刪除一個位址，您可以決定是否要將它歸檔到 PC 上。"
+"如果您勾選此選項，則此位址會被加到您的通訊錄中，但不會再同步到您的掌上型裝置"
+"中。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:136
+#: conduits/docconduit/doc-setupdialog.ui:390
+#: conduits/vcalconduit/korganizerConduit.ui:165
+#, no-c-format
+msgid "Conflicts"
+msgstr "衝突"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:166
+#: conduits/vcalconduit/korganizerConduit.ui:184
+#: kpilot/kpilotConfigDialog_sync.ui:148
+#, no-c-format
+msgid "Conflict &resolution:"
+msgstr "解決衝突(&R)："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:172
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:218
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
+"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
+"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
+"entry on both the PC and handheld.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目（您在掌上型裝置跟 PC 中都有修改的項"
+"目）。可用的選項包括：「使用 KPilot 全域設定」會直接使用在 KPilot 熱同步設定"
+"中的設定；「詢問使用者」則會每次都詢問使用者的意見；「不做任何事」就是維持原"
+"狀；還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等，最後「兩個"
+"項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:178
+#: conduits/vcalconduit/korganizerConduit.ui:193
+#, no-c-format
+msgid "Use KPilot's Global Setting"
+msgstr "使用 KPilot 全域設定"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:183
+#: conduits/vcalconduit/korganizerConduit.ui:198
+#: kpilot/kpilotConfigDialog_sync.ui:100
+#, no-c-format
+msgid "Ask User"
+msgstr "詢問使用者"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:188
+#: conduits/vcalconduit/korganizerConduit.ui:203
+#: kpilot/kpilotConfigDialog_sync.ui:105
+#, no-c-format
+msgid "Do Nothing"
+msgstr "不做任何事"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:193
+#: conduits/vcalconduit/korganizerConduit.ui:208
+#: kpilot/kpilotConfigDialog_sync.ui:110
+#, no-c-format
+msgid "Handheld Overrides"
+msgstr "掌上型裝置覆寫"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:198
+#: conduits/vcalconduit/korganizerConduit.ui:213
+#: kpilot/kpilotConfigDialog_sync.ui:115
+#, no-c-format
+msgid "PC Overrides"
+msgstr "PC 覆寫"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:203
+#: conduits/vcalconduit/korganizerConduit.ui:218
+#: kpilot/kpilotConfigDialog_sync.ui:120
+#, no-c-format
+msgid "Values From Last Sync (if possible)"
+msgstr "最後一次同步的值（可以的話）"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:208
+#: conduits/vcalconduit/korganizerConduit.ui:223
+#: kpilot/kpilotConfigDialog_sync.ui:125
+#, no-c-format
+msgid "Use Both Entries"
+msgstr "兩個項目都使用"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:226
+#, no-c-format
+msgid ""
+"<p>Select the default action if an event was modified on both sides here. </"
+"p>"
+msgstr "<p>在此選擇事件在兩邊變更後的預設動作。</p>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:258
+#, no-c-format
+msgid "Fields"
+msgstr "欄位"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:275
+#, no-c-format
+msgid "Handheld other phone:"
+msgstr "掌上型裝置中的其他電話欄位："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:278
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:334
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"&quot;Other&quot; phone here.</qt>"
+msgstr ""
+"<qt>選擇 Pilot 裡的「其他」電話要儲存在 KAddressBook 裡的哪個欄位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:284
+#, no-c-format
+msgid "Other Phone"
+msgstr "其他電話"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:289
+#, no-c-format
+msgid "Assistant"
+msgstr "助理"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:294
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:385
+#, no-c-format
+msgid "Business Fax"
+msgstr "工作傳真"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:299
+#, no-c-format
+msgid "Car Phone"
+msgstr "車上電話"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:304
+#, no-c-format
+msgid "Email 2"
+msgstr "電子郵件地址 2"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:309
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:380
+#, no-c-format
+msgid "Home Fax"
+msgstr "家用傳真"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:314
+#, no-c-format
+msgid "Telex"
+msgstr "電報"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:319
+#, no-c-format
+msgid "TTY/TTD Phone"
+msgstr "TTY/TTD 電話"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:342
+#, no-c-format
+msgid "Handheld street address:"
+msgstr "掌上型街道地址："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:345
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:363
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Pilot's "
+"Street Address here.</qt>"
+msgstr "<qt>選擇 Pilot 中的街道地址要儲存在 KAddressBook 中的哪個欄位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:351
+#, no-c-format
+msgid "Preferred, then Home Address"
+msgstr "先使用預設的，然後住家地址"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:356
+#, no-c-format
+msgid "Preferred, then Business Address"
+msgstr "先使用預設的，然後商業地址"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:371
+#, no-c-format
+msgid "Handheld fax:"
+msgstr "掌上型裝置中的傳真欄位："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:374
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:392
+#, no-c-format
+msgid ""
+"<qt>Select which KAddressBook field should be used to store the Fax number "
+"from the Pilot here.</qt>"
+msgstr "<qt>選擇 Pilot 中的傳真號碼要儲存在 KAddressBook 中的哪個欄位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:419
+#, no-c-format
+msgid "Custom Fields"
+msgstr "自訂欄位"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:438
+#, no-c-format
+msgid "Handheld custom field 1:"
+msgstr "掌上型裝置中的自訂欄位 1："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:441
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:510
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the first custom field on your handheld.</qt>"
+msgstr ""
+"<qt>從這份清單中，選擇您的掌上型裝置中的第一個自訂欄位應該搭配清單中的哪個欄"
+"位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:449
+#, no-c-format
+msgid "Handheld custom field 2:"
+msgstr "掌上型裝置中的自訂欄位 2："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:452
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:546
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the second custom field on your handheld.</qt>"
+msgstr ""
+"<qt>從這份清單中，選擇您的掌上型裝置中的第二個自訂欄位應該搭配清單中的哪個欄"
+"位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:460
+#, no-c-format
+msgid "Handheld custom field 3:"
+msgstr "掌上型裝置中的自訂欄位 3："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:463
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:582
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the third custom field on your handheld.</qt>"
+msgstr ""
+"<qt>從這份清單中，選擇您的掌上型裝置中的第三個自訂欄位應該搭配清單中的哪個欄"
+"位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:471
+#, no-c-format
+msgid "Handheld custom field 4:"
+msgstr "掌上型裝置中的自訂欄位 4："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:474
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:618
+#, no-c-format
+msgid ""
+"<qt>Select the field from this list that represents best the meaning given "
+"by your use of the fourth custom field on your handheld.</qt>"
+msgstr ""
+"<qt>從這份清單中，選擇您的掌上型裝置中的第四個自訂欄位應該搭配清單中的哪個欄"
+"位。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:480
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:516
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:552
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:588
+#, no-c-format
+msgid "Store as Custom Field"
+msgstr "儲存為自訂欄位"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:485
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:521
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:557
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:593
+#, no-c-format
+msgid "Birthdate"
+msgstr "生日"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:490
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:526
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:562
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:598
+#, no-c-format
+msgid "URL"
+msgstr "網址"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:495
+#, no-c-format
+msgid "IM Address (ICQ, MS, ...)"
+msgstr "即時通訊地址（ICQ，MS，...）"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:531
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:567
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:603
+#, no-c-format
+msgid "IM Address (ICQ, MSN, ...)"
+msgstr "即時通訊地址（ICQ，MSN，...）"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:640
+#, no-c-format
+msgid "Date &format:"
+msgstr "日期格式(&F)："
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:646
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:700
+#, no-c-format
+msgid ""
+"<qt>Select the birthdate format here, if you selected \"birthdate\" for any "
+"of the custom fields above. Possible placeholders are:<br> %d for the day, "
+"%m for the month, %y for the two-digit year, %Y for the four-digit year. "
+"For  example, %d.%m.%Y would generate a date like 27.3.1952, while %m/%d/%y "
+"would write the same date as 03/27/52. </qt>"
+msgstr ""
+"<qt>如果您在上方的任一個自訂欄位定義中選擇了「生日」，則您可以在此選擇生日的"
+"格式。符號所代表的意義為：<br> %d：日；%m：月；%y：西元年，二位數；%Y：西元"
+"年，四位數。例如，%d.%m.%Y 會將日期顯示為 27.3.1952，而 %m/%d/%y 會將日期顯示"
+"為 03/27/52。</qt>"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:652
+#, no-c-format
+msgid "Locale Settings"
+msgstr "區域化設定"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:657
+#, no-c-format
+msgid "%d.%m.%Y"
+msgstr "%d.%m.%Y"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:662
+#, no-c-format
+msgid "%d.%m.%y"
+msgstr "%d.%m.%y"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:667
+#, no-c-format
+msgid "%d/%m/%Y"
+msgstr "%d/%m/%Y"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:672
+#, no-c-format
+msgid "%d/%m/%y"
+msgstr "%d/%m/%y"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:677
+#, no-c-format
+msgid "%m/%d/%Y"
+msgstr "%m/%d/%Y"
+
+#: conduits/abbrowserconduit/kaddressbookConduit.ui:682
+#, no-c-format
+msgid "%m/%d/%y"
+msgstr "%m/%d/%y"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:16
+#, no-c-format
+msgid "widget2"
+msgstr "元件2"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:27
+#, no-c-format
+msgid ""
+"The following record was edited both on the handheld and on the PC. Please "
+"choose which values shall be synced:"
+msgstr ""
+"以下的紀錄同時在掌上型裝置與 PC 上都有編輯修改過。請選擇要以那個值為主來同"
+"步："
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:36
+#, no-c-format
+msgid "Field"
+msgstr "欄位"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:55
+#, no-c-format
+msgid ""
+"<qt>Use this list to resolve, field by field, the conflicts created when a "
+"record was edited both on the handheld and on the PC. For each record, the "
+"different values from the last sync, the handheld and PC are displayed for "
+"each field, allowing you to choose the desired value.</qt>"
+msgstr ""
+"<qt>當某一筆紀錄同時在 PC 與掌上型裝置中修改過的時候，依每個欄位，使用此清單"
+"來解決衝突的問題。在每一筆資料的每一個欄位中，都會顯示與上一次同步後不同的"
+"值，在掌上型裝置上的值與在 PC 上的值，好讓您選擇想要同步的值。</qt>"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:63
+#, no-c-format
+msgid ""
+"Line breaks in any of the entries are denoted by a \" | \" (without the "
+"quotes)."
+msgstr "任何項目資料中的斷行都會以 \" | \" 來顯示（但不包括那個 \"）。"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:85
+#, no-c-format
+msgid "&Keep Both"
+msgstr "都要保留(&K)"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:88
+#, no-c-format
+msgid ""
+"<qt>Click this button to use both values, resulting in the duplication of "
+"the record.</qt>"
+msgstr "<qt>點擊此按鍵就兩邊都保留，如此會複製一份紀錄。</qt>"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:96
+#, no-c-format
+msgid "&PC Values"
+msgstr "PC 上的值(&P)"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:99
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the PC values for synchronizing all conflicting "
+"fields in this record.</qt>"
+msgstr "<qt>點擊此按鍵就會使用 PC 上的值來同步。</qt>"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:107
+#, no-c-format
+msgid "&Last Sync Values"
+msgstr "最後一次同步的值(&L)"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:110
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the last sync values (old values) for "
+"synchronizing all conflicting fields in this record.</qt>"
+msgstr ""
+"<qt>點擊此按鍵就會使用最後一次同步後的值（也就是未變更前的舊值）來同步。</qt>"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:118
+#, no-c-format
+msgid "&Handheld Values"
+msgstr "掌上型裝置中的值(&H)"
+
+#: conduits/abbrowserconduit/resolutionDialog_base.ui:121
+#, no-c-format
+msgid ""
+"<qt>Click this button to use the handheld values for synchronizing all "
+"conflicting fields in this record.</qt>"
+msgstr "<qt>點擊此按鍵就會使用掌上型裝置中的值來同步。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:54
+#, no-c-format
+msgid "&Text files:"
+msgstr "文字檔(&T)："
+
+#: conduits/docconduit/doc-setupdialog.ui:60
+#: conduits/docconduit/doc-setupdialog.ui:82
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder used to find and synchronize text files. All files "
+"with extension .txt located in this folder will be synced to Palm DOC "
+"databases in your handheld.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要用於尋找與同步文字檔的資料夾位置，或直接點選檔案挑選器按"
+"鈕來挑選。所有在此資料夾中以 .txt 為副檔名的檔案，都會被您掌上型裝置中的 "
+"Palm DOC 資料庫裡的資料同步。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:68
+#, no-c-format
+msgid "Local co&py:"
+msgstr "本地端複製(&P)："
+
+#: conduits/docconduit/doc-setupdialog.ui:74
+#, no-c-format
+msgid ""
+"<qt>Check this box if you want to save a copy of the Palm DOC databases (."
+"pdb files) on your PC.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會儲存一份 Palm DOC 資料庫檔案（*.pdb）到您的 PC 上。</"
+"qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:90
+#, no-c-format
+msgid "Synchronization Mode"
+msgstr "同步模式"
+
+#: conduits/docconduit/doc-setupdialog.ui:107
+#, no-c-format
+msgid "Sync only P&C to PDA"
+msgstr "只從 PC 同步到 PDA(&C)"
+
+#: conduits/docconduit/doc-setupdialog.ui:113
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"not be converted to text files, but texts changed in the PC will be "
+"converted to the Palm DOC databases.</qt>"
+msgstr ""
+"<qt>選取此選項的話，會將您的 PC 中的文字檔變更同步到您的掌上型裝置的 Palm "
+"DOC 資料庫中。Palm DOC 資料庫的變更不會轉換為文字檔，但是在 PC 中的變更的文字"
+"會被轉換到 Palm DOC 資料庫中。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:121
+#, no-c-format
+msgid "Sync only P&DA to PC"
+msgstr "只從 PDA 同步到 PC(&D)"
+
+#: conduits/docconduit/doc-setupdialog.ui:124
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the changes made to Palm DOC databases "
+"in your handheld to the PC text files. Palm DOC databases modified in the "
+"handheld will be converted to text files, but texts changed in the PC will "
+"not be converted to the Palm DOC databases.</qt>"
+msgstr ""
+"<qt>選取此選項的話，會將您的掌上型裝置的 Palm DOC 資料庫的變更同步到您的 PC "
+"的文字檔中。Palm DOC 資料庫的變更會轉換為文字檔，但是在 PC 中的變更的文字不會"
+"被轉換到 Palm DOC 資料庫中。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:132
+#, no-c-format
+msgid "Sync &all"
+msgstr "全部同步(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:141
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
+"databases in your handheld. Palm DOC databases modified in the handheld will "
+"be converted to text files, and texts changed in the PC will be converted to "
+"the Palm DOC databases, keeping both versions in sync.</qt>"
+msgstr ""
+"<qt>選取此選項的話，會將您的掌上型裝置的 Palm DOC 資料庫與您的 PC 的文字檔做"
+"雙向同步。Palm DOC 資料庫的變更會轉換為文字檔，在 PC 中的變更的文字也會被轉換"
+"到 Palm DOC 資料庫中，讓兩邊的版本保持一致。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:168
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select clicking the file picker button, the name and "
+"location of the folder where copies of the handheld databases are kept (.pdb "
+"files). Local copies are only made if the box is checked as well.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要保存掌上型裝置資料庫檔案（*.pdb）複本的資料夾位置，或直接"
+"點選檔案挑選器按鈕來挑選。若同時勾選此選項的話，會順便做複製的動作。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:178
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:168
+#, no-c-format
+msgid "PC -> Handheld"
+msgstr "PC 到掌上型裝置"
+
+#: conduits/docconduit/doc-setupdialog.ui:189
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:255
+#, no-c-format
+msgid "&Compress"
+msgstr "壓縮(&C)"
+
+#: conduits/docconduit/doc-setupdialog.ui:195
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:261
+#, no-c-format
+msgid ""
+"Check this box, if the text should be compressed on the handheld to save "
+"memory. Most doc reader on the handheld support compressed texts."
+msgstr ""
+"勾選此選項的話，會將掌上型裝置中的文字做壓縮以節省記憶體。大部份在掌上型裝置"
+"的文件閱讀器都支援壓縮的功能。"
+
+#: conduits/docconduit/doc-setupdialog.ui:198
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC format supports compressing the text to save memory. Check "
+"this box to enable text compression, so the resulting Palm DOC database will "
+"consume about 50% less memory than in uncompressed state. Almost all DOC "
+"readers on the Palm support compressed texts.</qt>"
+msgstr ""
+"<qt>Palm DOC 格式支援壓縮文字以節省記憶體的功能。勾選此選項以開啟此功能，讓 "
+"Palm DOC 資料庫可以節省約 50% 左右的記憶體。大部份在掌上型裝置的文件閱讀器都"
+"支援壓縮的功能。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:206
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:272
+#, no-c-format
+msgid "Convert &bookmarks"
+msgstr "轉換書籤(&B)"
+
+#: conduits/docconduit/doc-setupdialog.ui:212
+#, no-c-format
+msgid ""
+"<qt>Check this box to enable bookmark creation when converting text files to "
+"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
+"bookmark, it is necessary to to provide the location in the text where the "
+"bookmark should be set and the bookmark title, in at least one of the "
+"formats listed below.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，在轉換文字檔到 Palm DOC 資料庫時會開啟建立書籤的功能。大"
+"部份的文件閱讀器都支援書籤。要建立書籤，至少需要以下面列出的一種格式提供書籤"
+"設定的位置，以及書籤的標題。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:237
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:230
+#, no-c-format
+msgid "&Inline tags in text"
+msgstr "文字中的內含標籤(&I)"
+
+#: conduits/docconduit/doc-setupdialog.ui:243
+#, no-c-format
+msgid ""
+"Check this box to create bookmarks from inline tags in the text. The inline "
+"tag consist of tags in the form <* bookmarktext *>. The bookmark location is "
+"set using the location of the inline tag in the text, and  the name is the "
+"text between the <* and the *>. The inline tag (<*...*>) will be removed "
+"from the text."
+msgstr ""
+"勾選此選項的話，會從文字中的內含標籤來建立書籤。內含標籤包含了此格式 <* "
+"bookmarktext *> 的標籤。書籤的位置會用文字中的內含標籤的位置，標題名稱則用 "
+"<* 與 *> 間的文字。最後此標籤（<* ... *>）會從文字中移除。"
+
+#: conduits/docconduit/doc-setupdialog.ui:251
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:155
+#, no-c-format
+msgid "&Encoding:"
+msgstr "編碼(&E)："
+
+#: conduits/docconduit/doc-setupdialog.ui:262
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:244
+#, no-c-format
+msgid "&Tags at end of text"
+msgstr "文字結束的標籤(&T)"
+
+#: conduits/docconduit/doc-setupdialog.ui:265
+#, no-c-format
+msgid ""
+"Check this box to convert tags of the form <bookmarkname> at the end of the "
+"text to bookmarks. The text inside the tag (\"bookmarkname\") will be "
+"searched in the text, and whenever found, a bookmark will be set there. The "
+"endtags <...> will then be removed from the end of the text."
+msgstr ""
+"勾選此選項的話，會將文字結尾的 <bookmarkname> 標籤轉換為書籤。它會搜尋在標籤"
+"中的文字（\"bookmarkname\"），找到之後會將書籤設定在那裡。最後會將結束標籤 "
+"<...> 從文字尾端移除。"
+
+#: conduits/docconduit/doc-setupdialog.ui:273
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:286
+#, no-c-format
+msgid "Regular &expressions in .bmk file"
+msgstr ".bmk 檔中的正規表示式(&E)"
+
+#: conduits/docconduit/doc-setupdialog.ui:276
+#, no-c-format
+msgid ""
+"<qt>Check this box to use regular expressions in a file to search the text "
+"for bookmarks. The file should have the same name as the text file, but "
+"should end in .bmk instead of .txt (for instance, the regular expression "
+"file for textname.txt should be textname.bmk). See the documentation for a "
+"description of the format of the bmk file.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會使用檔案中的正規表示式來搜尋文字以建立書籤。此檔的檔名"
+"要與文字檔一樣，但是將副檔名換為 .bmk（例如，textname.txt 檔的書籤正規表示式"
+"檔應該要叫做 textname.bmk）。bmk 檔的格式請參考文件說明。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:291
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:316
+#, no-c-format
+msgid "Handheld -> PC"
+msgstr "掌上型裝置到 PC"
+
+#: conduits/docconduit/doc-setupdialog.ui:319
+#, no-c-format
+msgid "Do not convert, if text unchanged (only bookmarks)"
+msgstr "如果文字未變更（只變更書籤時）就不轉換"
+
+#: conduits/docconduit/doc-setupdialog.ui:322
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid syncing the text on the handheld to the PC if "
+"you only changed the bookmarks on the handheld (but not the text).</qt>"
+msgstr ""
+"<qt>勾選此選項的話，若您只變更掌上型裝置文件的書籤（但沒有變更文字內容），則"
+"不會同步到 PC 上。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:330
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:344
+#, no-c-format
+msgid "Convert Bookmarks"
+msgstr "轉換書籤"
+
+#: conduits/docconduit/doc-setupdialog.ui:341
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:372
+#, no-c-format
+msgid "Do &not convert bookmarks"
+msgstr "不轉換書籤(&N)"
+
+#: conduits/docconduit/doc-setupdialog.ui:347
+#, no-c-format
+msgid ""
+"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or "
+"to a bookmark file.</qt>"
+msgstr "<qt>勾選此選項以避免將 Palm DOC 書籤轉換為內含標籤或書籤檔。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:355
+#, no-c-format
+msgid "Convert into .bm &file"
+msgstr "轉換為 .bm 檔(&F)"
+
+#: conduits/docconduit/doc-setupdialog.ui:364
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
+"file, in the bmk format (see more about this format in the documentation). "
+"The resulting bookmark file shares the same filename as the resulting .txt "
+"file, but ends in .bmk instead. This approach creates a clean text file and "
+"a bookmark file.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，則會將 Palm DOC 資料庫書籤以 bmk 格式轉換到不同的檔案中"
+"（關於 bmk 格式請參考文件說明）。結果的書籤檔會與文字檔的檔名相同，只有副檔名"
+"換成 .bmk。這會建立一個乾淨的文字檔與書籤檔。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:372
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:358
+#, no-c-format
+msgid "Convert as &inline tags"
+msgstr "轉換為內含標籤(&I)"
+
+#: conduits/docconduit/doc-setupdialog.ui:378
+#, no-c-format
+msgid ""
+"<qt>Check this box to convert the Palm DOC database bookmarks to inline "
+"tags, in the form &lt;* BookmarkName *&gt;. These tags are inserted in the "
+"text in the position marked by the bookmark, and the text inside the tag "
+"corresponds to the bookmark name. Inline tags are easy to create, delete, "
+"move and edit.</qt>"
+msgstr ""
+"<qt>勾選此選項會將 Palm DOC 資料庫的書籤轉換為 &lt;* BookmarkName *&gt; 的內"
+"含標籤。這些標籤會安插在書籤所標示的位置上，標籤內的文字會使用書籤的名稱。內"
+"含標籤比較容易建立、刪除、移動與編輯。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:404
+#, no-c-format
+msgid ""
+"If the same text was changed on the PC and the handheld, which of the two "
+"versions should be used as the new version?"
+msgstr ""
+"如果同樣的文字，在 PC 與掌上型裝置中都做了變更，則要以哪個版本為主來同步？"
+
+#: conduits/docconduit/doc-setupdialog.ui:407
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, the "
+"choice is between working with the files out of sync, or discarding the "
+"changes in one of them.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此，您"
+"必須選擇要使用哪一邊的版本，或是兩個都不要。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:418
+#, no-c-format
+msgid "&No resolution"
+msgstr "不解決(&N)"
+
+#: conduits/docconduit/doc-setupdialog.ui:424
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to prevent "
+"KPilot from overwriting your modifications.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此，您"
+"必須選擇要使用哪一邊的版本，或是兩個都不要。選取此選項，則 KPilot 不會去處理"
+"與覆寫您的變更。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:432
+#, no-c-format
+msgid "P&DA overrides"
+msgstr "PDA 覆寫(&D)"
+
+#: conduits/docconduit/doc-setupdialog.ui:438
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to make the PDA "
+"version overwrite the PC version in case of conflict.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此，您"
+"必須選擇要使用哪一邊的版本，或是兩個都不要。選取此選項，則以 PDA 的版本為主，"
+"PC 端的內容將被同步，原本的變更將被丟棄。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:446
+#, no-c-format
+msgid "P&C overrides"
+msgstr "PC 覆寫(&C)"
+
+#: conduits/docconduit/doc-setupdialog.ui:452
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to make the PC "
+"version overwrite the PDA version in case of conflict.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此，您"
+"必須選擇要使用哪一邊的版本，或是兩個都不要。選取此選項，則以 PC 的版本為主，"
+"PDA 端的內容將被同步，原本的變更將被丟棄。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:460
+#, no-c-format
+msgid "&Ask the user"
+msgstr "詢問使用者(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:469
+#, no-c-format
+msgid ""
+"<qt>The Palm DOC conduit does not feature merging the modifications when a "
+"text is changed both in the handheld and in the computer. Therefore, when "
+"conflicts appear, the choice is between working with the files out of sync, "
+"or discarding the changes in one of them. Select this option to show the "
+"resolution dialog to let the user decide on a case by case basis.</qt>"
+msgstr ""
+"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此，您"
+"必須選擇要使用哪一邊的版本，或是兩個都不要。選取此選項，則會顯示出解決對話"
+"框，讓使用者決定要怎麼做。</qt>"
+
+#: conduits/docconduit/doc-setupdialog.ui:479
+#, no-c-format
+msgid "&Always show the resolution dialog"
+msgstr "永遠顯示解決對話框(&A)"
+
+#: conduits/docconduit/doc-setupdialog.ui:482
+#, no-c-format
+msgid ""
+"<qt>Check this box to force the resolution dialog to appear even when there "
+"are no conflicts.</qt>"
+msgstr "<qt>勾選此選項以強制解決對話框出現，即使沒有衝突也一樣。</qt>"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:47
+#, no-c-format
+msgid "&PalmDOC file:"
+msgstr "PalmDOC 檔案(&P)："
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:77
+#, no-c-format
+msgid "Convert whole &folders"
+msgstr "轉換整個資料夾(&F)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:85
+#, no-c-format
+msgid ""
+"Folder where copies of the handheld databases are kept. You can install them "
+"to any PalmOS handheld, and distribute these copies to other people (but "
+"beware of copyright infringement)."
+msgstr ""
+"掌上型裝置中的資料庫要複製到哪個資料夾。您可以安裝這些複本到任何 PalmOS 掌上"
+"型裝置，並散布這些複本給其它人（不過請小心版權問題）。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:93
+#, no-c-format
+msgid "&Ask before overwriting files"
+msgstr "覆寫檔案前先詢問(&A)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:101
+#, no-c-format
+msgid "&Verbose messages"
+msgstr "詳細訊息(&V)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:109
+#, no-c-format
+msgid "Convert Text to PalmDOC"
+msgstr "轉換文字到 PalmDOC"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:117
+#, no-c-format
+msgid "Convert PalmDOC to Text"
+msgstr "轉換 PalmDOC 為文字"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:142
+#, no-c-format
+msgid ""
+"Enter the name of the folder where the text files reside on the PC. All "
+"files with extension .txt will be synced to the handheld."
+msgstr ""
+"輸入文字檔要放在 PC 上的資料夾名稱。所有副檔名為 .txt 的檔案都會與掌上型裝置"
+"同步。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:236
+#, no-c-format
+msgid ""
+"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be "
+"set at this position, and the text between the <* and the *> will be used as "
+"bookmark name. The <*...*> will be removed from the text."
+msgstr ""
+"當 <* bookmarktext *> 出現在文字的某處時，會在該處設定一個書籤，而 <* 與 *> "
+"間的文字會做為書籤的名稱。最後 <* ... *> 會從文字中移除。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:247
+#, no-c-format
+msgid ""
+"Tags of the form <bookmarkname> at the end of the text will be used to "
+"search the text for the pattern between the < and >. Whenever \"bookmarkname"
+"\" appears in the text, a bookmark will be set there. The endtags <...> will "
+"then be removed from the end of the text."
+msgstr ""
+"放在文字尾端的格式為 <bookmarkname> 的標籤會被用於搜尋在 < 與 > 間的文字。當 "
+"\"bookmarkname\" 出現在文字中時，會在該處設置一個書籤。最後 <...> 的標籤會被"
+"移除。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:264
+#, no-c-format
+msgid ""
+"The Palm doc format supports compressing the text to save memory. If you "
+"check this box, the text will consume about 50% less memory than in "
+"uncompressed state. Almost all DOC readers on the Palm support compressed "
+"texts."
+msgstr ""
+"Palm DOC 格式支援壓縮文字，以節省記憶體。如果您勾選此選項，會節省約 50% 的記"
+"憶體。大部份 Palm 上面的文件閱讀器都支援文字壓縮。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:278
+#, no-c-format
+msgid ""
+"Do you want to convert bookmarks? Most doc readers support bookmarks. You "
+"have to provide some information about where the bookmarks should be set and "
+"their titles. Check at least one of the bookmark types below."
+msgstr ""
+"您要轉換書籤嗎？大部份的文件閱讀器都支援書籤。您至少需要以下面列出的一種格式"
+"提供書籤設定的位置，以及書籤的標題。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:289
+#, no-c-format
+msgid ""
+"Use regular expressions in a file textname.bmk (textname.txt is the filename "
+"of the text) to search the text for bookmarks.See the documentation for a "
+"description of the format of the bmk file."
+msgstr ""
+"使用 textname.bmk 檔（文字檔名為 textname.txt）中的正規表示式來搜尋要做書籤的"
+"文字。bmk 檔的格式請參考文件說明。"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:386
+#, no-c-format
+msgid "Convert as &end tags"
+msgstr "轉換為結束標記(&E)"
+
+#: conduits/docconduit/kpalmdoc_dlgbase.ui:394
+#, no-c-format
+msgid "Convert into .bmk &file"
+msgstr "轉換為 .bmk 檔案(&F)"
+
+#: conduits/knotes/knotesconduit.kcfg:12
+#, no-c-format
+msgid "Suppress the confirmation KNotes normally shows when deleting a note."
+msgstr ""
+
+#: conduits/knotes/knotesconduit.kcfg:17
+#, no-c-format
+msgid "list of the synced MemoDB records"
+msgstr ""
+
+#: conduits/knotes/knotesconduit.kcfg:21
+#, no-c-format
+msgid "list of the corresponding KNotes note IDs"
+msgstr ""
+
+#: conduits/knotes/setup_base.ui:45
+#, no-c-format
+msgid "Delete KNote when Pilot memo is deleted"
+msgstr "當刪除 Pilot 備忘時刪除 KNote"
+
+#: conduits/knotes/setup_base.ui:51
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes automatically "
+"when the corresponding Pilot memo is deleted. Use this option with care, as "
+"the notes you want to keep in the handheld and in the desktop are not "
+"necessarily the same.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，您刪除 Pilot 備忘的時候，會自動刪除 KNotes 上相關聯的備"
+"忘。請小心使用此選項，因為您要保存在掌上型裝置的備忘跟您想保存在桌面上的備忘"
+"不見得一樣。</qt>"
+
+#: conduits/knotes/setup_base.ui:59
+#, no-c-format
+msgid "Suppress delete-confirmation in KNotes"
+msgstr "刪除 KNotes 備忘時不需確認"
+
+#: conduits/knotes/setup_base.ui:62
+#, no-c-format
+msgid ""
+"<qt>Check this box if you wish to delete notes from KNotes, without "
+"confirmation, when the corresponding Pilot memo is deleted. Use this option "
+"only if you want to keep the same notes in the handheld and in the PC.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，在刪除 Pilot 備忘的同時要刪除相關 KNotes 備忘的話，將不會"
+"與您確認。除非您確定您要在掌上型裝置與您的 PC 中保存同樣的備忘，否則請不要使"
+"用此選項。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:49
+#, no-c-format
+msgid "Sync"
+msgstr "同步"
+
+#: conduits/malconduit/mal-setup_dialog.ui:52
+#, no-c-format
+msgid "Select how often AvantGo should be synchronised"
+msgstr "選擇 AvantGo 多久應該同步一次"
+
+#: conduits/malconduit/mal-setup_dialog.ui:72
+#, no-c-format
+msgid "&Every sync"
+msgstr "每次熱同步時(&E)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:78
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync. "
+"To perform a successful synchronization, you need to have access to the MAL "
+"server during the HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項，則在每次進行熱同步時會與 MAL 伺服器同步。要成功同步，您必須在"
+"熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:86
+#, no-c-format
+msgid "Once per &hour"
+msgstr "每小時一次(&H)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:92
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one hour after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項，則在上一次與 MAL 伺服器同步之後至少隔一小時的熱同步動作時，會"
+"再與 MAL 伺服器同步。要成功同步，您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:100
+#, no-c-format
+msgid "Once a &day"
+msgstr "每天一次(&D)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:103
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one day after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項，則在上一次與 MAL 伺服器同步之後至少隔一天的熱同步動作時，會再"
+"與 MAL 伺服器同步。要成功同步，您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:111
+#, no-c-format
+msgid "Once a &week"
+msgstr "每週一次(&W)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:114
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one week after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項，則在上一次與 MAL 伺服器同步之後至少隔一週的熱同步動作時，會再"
+"與 MAL 伺服器同步。要成功同步，您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:122
+#, no-c-format
+msgid "Once a &month"
+msgstr "每個月一次(&M)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:125
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the MAL server on every HotSync "
+"that is at least one month after the previous MAL sync. To perform a "
+"successful synchronization, you need to have access to the MAL server during "
+"the HotSync.</qt>"
+msgstr ""
+"<qt>選擇此選項，則在上一次與 MAL 伺服器同步之後至少隔一個月的熱同步動作時，會"
+"再與 MAL 伺服器同步。要成功同步，您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:154
+#, no-c-format
+msgid "Proxy"
+msgstr "代理伺服器"
+
+#: conduits/malconduit/mal-setup_dialog.ui:168
+#, no-c-format
+msgid "Proxy Type"
+msgstr "代理伺服器類型"
+
+#: conduits/malconduit/mal-setup_dialog.ui:185
+#, no-c-format
+msgid "&No proxy"
+msgstr "不使用代理伺服器(&N)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:191
+#, no-c-format
+msgid ""
+"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
+"this option if you connect to the internet directly.</qt>"
+msgstr "<qt>選擇此選項的話，您的 KPilot 不會使用代理伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:199
+#, no-c-format
+msgid "&HTTP proxy"
+msgstr "HTTP 代理伺服器(&H)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:202
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
+msgstr "<qt>選擇此選項的話，您的 KPilot 會使用 HTTP 代理伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:210
+#, no-c-format
+msgid "&SOCKS proxy"
+msgstr "SOCKS 代理伺服器(&S)"
+
+#: conduits/malconduit/mal-setup_dialog.ui:213
+#, no-c-format
+msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
+msgstr "<qt>選擇此選項的話，您的 KPilot 會使用 SOCKS 代理伺服器。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:226
+#, no-c-format
+msgid "Server Information"
+msgstr "伺服器資訊"
+
+#: conduits/malconduit/mal-setup_dialog.ui:260
+#: conduits/malconduit/mal-setup_dialog.ui:462
+#, no-c-format
+msgid "Custom &port:"
+msgstr "自訂連接埠(&P)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:263
+#, no-c-format
+msgid "Check this box to use a non-standard proxy port."
+msgstr "勾選此選項以使用一個非標準的代理伺服器連接埠。"
+
+#: conduits/malconduit/mal-setup_dialog.ui:271
+#, no-c-format
+msgid "Ser&ver name:"
+msgstr "伺服器名稱(&V)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:277
+#: conduits/malconduit/mal-setup_dialog.ui:285
+#, no-c-format
+msgid ""
+"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy "
+"server to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar."
+"com</i> or <i>http://foo.bar.com:8080</i>).</qt>"
+msgstr ""
+"<qt>如果您選取 HTTP 或 SOCKS 伺服器，請在此輸入伺服器的位址，格式為 <i>foo."
+"bar.com</i>（而不是 <i>http://foo.bar.com</i> 或 <i>http://foo.bar.com:8080</"
+"i>）。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:305
+#, no-c-format
+msgid ""
+"<qt>Enter the port you want KPilot to use when connecting to your proxy "
+"server here.</qt>"
+msgstr "<qt>輸入 KPilot 連線到代理伺服器時使用的連接埠。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:316
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your password here.</qt>"
+msgstr "<qt>如果您的代理伺服器需要認證，請在使輸入您的密碼。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:324
+#: conduits/malconduit/mal-setup_dialog.ui:349
+#, no-c-format
+msgid ""
+"<qt>If your proxy requires authentication, enter your username here.</qt>"
+msgstr "<qt>如果您的代理伺服器需要認證，請在此輸入您的使用者名稱。</qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:332
+#: conduits/malconduit/mal-setup_dialog.ui:514
+#, no-c-format
+msgid "&Password:"
+msgstr "密碼(&P)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:343
+#: conduits/malconduit/mal-setup_dialog.ui:525
+#, no-c-format
+msgid "&User name:"
+msgstr "使用者名稱(&U)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:371
+#: conduits/malconduit/mal-setup_dialog.ui:385
+#, no-c-format
+msgid ""
+"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
+"separated with commas, e.g: <br><i>localhost,127.0.0.1,.lan</i><qt>"
+msgstr ""
+"<qt>在此輸入不需要使用代理伺服器的 MAL 伺服器，以逗號分隔。例如："
+"<br><i>localhost,127.0.0.1,.lan</i>。<qt>"
+
+#: conduits/malconduit/mal-setup_dialog.ui:379
+#, no-c-format
+msgid "N&o proxy for:"
+msgstr "不使用代理伺服器的清單(&O)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:414
+#, no-c-format
+msgid "MAL Server"
+msgstr "MAL 伺服器"
+
+#: conduits/malconduit/mal-setup_dialog.ui:434
+#, no-c-format
+msgid "MAL Server Information"
+msgstr "MAL 伺服器資訊"
+
+#: conduits/malconduit/mal-setup_dialog.ui:451
+#, no-c-format
+msgid "&MAL server name:"
+msgstr "MAL 伺服器名稱(&M)："
+
+#: conduits/malconduit/mal-setup_dialog.ui:574
+#, no-c-format
+msgid ""
+"<qt>There is currently <b>no way to set server parameters on the desktop</"
+"b>; you need to use the <i>MobileLink</i> or <i>AGConnect</i> application on "
+"the handheld device. </qt>"
+msgstr ""
+"<qt>目前沒有任何方法可在桌面上設定伺服器資訊。您必須使用掌上型裝置裡的 "
+"<i>MobileLink</i> 或 <i>AGConnect</i>。</qt>"
+
+#: conduits/memofileconduit/memofileconduit.kcfg:6
+#, fuzzy, no-c-format
+msgid "What directory do you want to sync your PDA's memos with?"
+msgstr "選擇您要儲存您的 PDA 備忘錄的目錄"
+
+#: conduits/memofileconduit/memofileconduit.kcfg:10
+#, no-c-format
+msgid "Do you want to sync your private records to the filesystem?"
+msgstr ""
+
+#: conduits/memofileconduit/setup_base.ui:33
+#, no-c-format
+msgid "Memofile Conduit Options"
+msgstr "備忘導管選項"
+
+#: conduits/memofileconduit/setup_base.ui:96
+#, no-c-format
+msgid "Sync private records:"
+msgstr "同步私人紀錄："
+
+#: conduits/memofileconduit/setup_base.ui:104
+#, no-c-format
+msgid "Memos directory:"
+msgstr "備忘目錄："
+
+#: conduits/memofileconduit/setup_base.ui:115
+#, no-c-format
+msgid "Select the directory you want to store your PDA's memos in"
+msgstr "選擇您要儲存您的 PDA 備忘錄的目錄"
+
+#: conduits/notepadconduit/notepad-setup.ui:17
+#, no-c-format
+msgid "Path to the directory to which the pictures should be exported."
+msgstr "圖片要匯出的目錄路徑。"
+
+#: conduits/notepadconduit/notepad-setup.ui:65
+#, no-c-format
+msgid "Output:"
+msgstr "輸出："
+
+#: conduits/notepadconduit/notepadconduit.kcfg:9
+#, no-c-format
+msgid "The export directory for the notepad drawings"
+msgstr ""
+
+#: conduits/null/nullconduit.kcfg:9 conduits/recordconduit/settings.kcfg:13
+#, no-c-format
+msgid "The error message if the null conduit is supposed to fail"
+msgstr ""
+
+#: conduits/null/setup_base.ui:33 conduits/recordconduit/setup_base.ui:33
+#, no-c-format
+msgid "Null-Conduit Options"
+msgstr "虛擬導管選項"
+
+#: conduits/null/setup_base.ui:85 conduits/recordconduit/setup_base.ui:85
+#, no-c-format
+msgid "KPilot was here."
+msgstr "KPilot 在此。"
+
+#: conduits/null/setup_base.ui:88 conduits/recordconduit/setup_base.ui:88
+#, no-c-format
+msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
+msgstr "<qt>在此輸入要新增到您的 Pilot 上的同步紀錄的訊息。</qt>"
+
+#: conduits/null/setup_base.ui:96 conduits/recordconduit/setup_base.ui:96
+#, no-c-format
+msgid "&Log message:"
+msgstr "紀錄訊息(&L)："
+
+#: conduits/popmail/popmail.kcfg:9
+#, no-c-format
+msgid "Selects the way in which mail is sent: none (0), kmail (1)."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:13
+#, no-c-format
+msgid "The email address entered in the To: field of outgoing messages."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:17
+#, no-c-format
+msgid "The pathname of your .signature file."
+msgstr ""
+
+#: conduits/popmail/popmail.kcfg:21
+#, no-c-format
+msgid "The name of KMail's outbox - use with caution."
+msgstr ""
+
+#: conduits/popmail/setup-dialog.ui:34
+#, no-c-format
+msgid "Send Mail"
+msgstr "傳送郵件"
+
+#: conduits/popmail/setup-dialog.ui:62
+#, no-c-format
+msgid "Send method:"
+msgstr "傳送方法："
+
+#: conduits/popmail/setup-dialog.ui:65 conduits/popmail/setup-dialog.ui:127
+#, no-c-format
+msgid ""
+"<qt>Select the method KPilot will use to send the mail from your Handheld to "
+"the recipients here. Depending on the method you choose, the other fields in "
+"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
+"method is through KMail.</qt>"
+msgstr ""
+"<qt>請選擇 KPilot 用於傳送您的掌上型裝置發出的郵件的方式。依據您選取的方式不"
+"同，其它欄位可能會開啟或關閉。目前僅支援透過 KMail。</qt>"
+
+#: conduits/popmail/setup-dialog.ui:73
+#, no-c-format
+msgid "Email address:"
+msgstr "電子郵件地址："
+
+#: conduits/popmail/setup-dialog.ui:76 conduits/popmail/setup-dialog.ui:87
+#, no-c-format
+msgid "<qt>Enter the email address you want to send messages as here.</qt>"
+msgstr "<qt>請輸入您要傳送郵件的收件人電子郵件地址。</qt>"
+
+#: conduits/popmail/setup-dialog.ui:84
+#, no-c-format
+msgid "$USER"
+msgstr "$USER"
+
+#: conduits/popmail/setup-dialog.ui:95
+#, no-c-format
+msgid "Signature file:"
+msgstr "簽名檔："
+
+#: conduits/popmail/setup-dialog.ui:98 conduits/popmail/setup-dialog.ui:106
+#, no-c-format
+msgid ""
+"<qt>If you want to add a signature file, enter the location of your "
+"signature file (usually, <i>.signature</i>, located in your home folder) "
+"here, or select it clicking the file picker button. The signature file "
+"contains the text that is added to the end of your outgoing mail messages.</"
+"qt>"
+msgstr ""
+"<qt>如果您要加入簽名檔，請輸入您簽名檔的位置（通常是您家目錄中的 <i>."
+"signature</i>），或是透過檔案挑選器挑選。簽名檔內的文字會被附在信件的最後面。"
+"</qt>"
+
+#: conduits/popmail/setup-dialog.ui:112
+#, no-c-format
+msgid "Do Not Send Mail"
+msgstr "不要傳送郵件"
+
+#: conduits/popmail/setup-dialog.ui:117
+#, no-c-format
+msgid "Use KMail"
+msgstr "使用 KMail"
+
+#: conduits/recordconduit/settings.kcfg:9
+#, no-c-format
+msgid "Whether the conduit should immediately bail out with an error"
+msgstr ""
+
+#: conduits/recordconduit/settings.kcfg:17
+#, no-c-format
+msgid "Databases that are skipped on sync"
+msgstr ""
+
+#: conduits/recordconduit/setup_base.ui:107
+#, no-c-format
+msgid "&Databases:"
+msgstr "資料庫(&D)："
+
+#: conduits/recordconduit/setup_base.ui:118
+#, no-c-format
+msgid ""
+"<qt>The Null-conduit can be attached to several databases, effectively "
+"preventing them from Syncing. Enter the database names here.</qt>"
+msgstr ""
+"<qt>虛擬導管（Null Conduit）可以附加到一些資料庫中，避免它們被同步。請在此輸"
+"入資料庫名稱。</qt>"
+
+#: conduits/recordconduit/setup_base.ui:143
+#, no-c-format
+msgid "Simulate failure"
+msgstr "模擬失敗"
+
+#: conduits/recordconduit/setup_base.ui:146
+#, no-c-format
+msgid "Force the conduit to simulate a failure to perform the HotSync."
+msgstr "強迫導管模擬執行熱同步失敗。"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:63
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:77
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking the file picker button, the location "
+"and file name of the output file used to store the handheld's system "
+"information.</qt>"
+msgstr ""
+"<qt>請在此輸入要儲存掌上型裝置系統資訊的輸出檔名與位置，或直接點選檔案挑選器"
+"按鈕來挑選。</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:71
+#, no-c-format
+msgid "Output &file:"
+msgstr "輸出檔案(&F)："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:85
+#, no-c-format
+msgid "Type of Output"
+msgstr "輸出類型"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:96
+#, no-c-format
+msgid "&HTML"
+msgstr "HTML(&H)"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:102
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a HTML "
+"document.</qt>"
+msgstr "<qt>選擇此選項，則會將系統資訊輸出到 HTML 文件中。</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:110
+#, no-c-format
+msgid "Te&xt file"
+msgstr "文字檔(&X)"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:113
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as a text "
+"document.</qt>"
+msgstr "<qt>選擇此選項，則會將系統資訊輸出到文字檔中。</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:124
+#, no-c-format
+msgid ""
+"<qt>Enter here, or select by clicking on the file picker button, the "
+"location of the template to be used if you select the Custom template option."
+"</qt>"
+msgstr ""
+"<qt>若您選擇使用自訂樣本，請在此輸入您要使用的樣本位置，或直接點選檔案挑選器"
+"按鈕來挑選。</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:132
+#, no-c-format
+msgid "&Custom template:"
+msgstr "自訂樣本(&C)："
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:135
+#, no-c-format
+msgid ""
+"<qt>Select this option to output the system information data as defined by a "
+"custom template. Enter the location of the template in the edit box, or "
+"select it clicking on the file picker button.</qt>"
+msgstr ""
+"<qt>選擇此選項，以使用自訂樣本來輸出系統資訊。您可以在此輸入您要使用的樣本位"
+"置，或直接點選檔案挑選器按鈕來挑選。</qt>"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:147
+#, no-c-format
+msgid "Parts Included"
+msgstr "要引入的部份"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:173
+#, no-c-format
+msgid "Output Type"
+msgstr "輸出類型"
+
+#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:189
+#, no-c-format
+msgid ""
+"<qt>Check on this list the types of information about your system and "
+"handheld you want to display in the output file.</qt>"
+msgstr "<qt>在此清單上選擇您打算輸出到檔案中的掌上型裝置的系統資訊類型。</qt>"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:23
+#, no-c-format
+msgid "Debug information (for KPilot developers)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:27
+#, fuzzy, no-c-format
+msgid "Hardware information"
+msgstr "資料庫資訊"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:31
+#, no-c-format
+msgid "List of databases on handheld (takes long!)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:35
+#, fuzzy, no-c-format
+msgid "Memory information"
+msgstr "系統資訊"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:39
+#, no-c-format
+msgid "Number of addresses, todos, events and memos"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:43
+#, fuzzy, no-c-format
+msgid "PalmOS version"
+msgstr "PalmOS 版本"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:47
+#, no-c-format
+msgid "Storage info (SD card, memory stick, ...)"
+msgstr ""
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:51
+#, fuzzy, no-c-format
+msgid "Synchronization information"
+msgstr "同步模式"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:55
+#, fuzzy, no-c-format
+msgid "User information"
+msgstr "資料庫資訊"
+
+#: conduits/sysinfoconduit/sysinfoconduit.kcfg:59
+#, no-c-format
+msgid "Version of KPilot, pilot-link and TDE"
+msgstr ""
+
+#: conduits/timeconduit/time-setup_dialog.ui:63
+#, no-c-format
+msgid "Direction"
+msgstr "方向"
+
+#: conduits/timeconduit/time-setup_dialog.ui:80
+#, no-c-format
+msgid "Set the &handheld time from the time on the PC"
+msgstr "依據 PC 時間設定掌上型裝置的時間(&H)"
+
+#: conduits/timeconduit/time-setup_dialog.ui:86
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the PC time on both.</qt>"
+msgstr "<qt>選取此選項的話，會根據 PC 上的時間來同步掌上型裝置的時間。</qt>"
+
+#: conduits/timeconduit/time-setup_dialog.ui:97
+#, no-c-format
+msgid "Set the &PC time from the time on the handheld"
+msgstr "依據掌上型裝置的時間設定 PC 的時間(&H)"
+
+#: conduits/timeconduit/time-setup_dialog.ui:100
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize the handheld time with the PC time, by "
+"using the handheld time on both.</qt>"
+msgstr "<qt>選取此選項的話，會根據掌上型裝置上的時間來同步 PC 上的時間。</qt>"
+
+#: conduits/timeconduit/time-setup_dialog.ui:110
+#, no-c-format
+msgid ""
+"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so "
+"this conduit will be skipped for handhelds that run either of these "
+"operating systems.</qt>"
+msgstr ""
+"<qt>PalmOS 3.25 與 3.3 版不支援設定系統時間，因此此導管在這兩個版本的作業系統"
+"上將被忽略。</qt>"
+
+#: conduits/vcalconduit/korganizerConduit.ui:31
+#, no-c-format
+msgid "Calendar-Conduit Options"
+msgstr "行事曆導管選項"
+
+#: conduits/vcalconduit/korganizerConduit.ui:105
+#, no-c-format
+msgid "&Standard calendar"
+msgstr "標準行事曆(&S)"
+
+#: conduits/vcalconduit/korganizerConduit.ui:108
+#, no-c-format
+msgid ""
+"<qt>Select this option to synchronize with the calendar specified by the TDE "
+"calendar settings.</qt>"
+msgstr "<qt>選取此選項的話，會與 TDE 行事曆設定中指定的行事曆同步。</qt>"
+
+#: conduits/vcalconduit/korganizerConduit.ui:119
+#, no-c-format
+msgid "Calendar &file:"
+msgstr "行事曆檔案(&F)："
+
+#: conduits/vcalconduit/korganizerConduit.ui:122
+#, no-c-format
+msgid ""
+"<qt>Select this option to use a specific calendar file, instead of the "
+"standard TDE calendar. This file must be in the in the vCalendar or "
+"iCalendar format. Enter the location of this file in the edit box or select "
+"it clicking the file picker button.</qt>"
+msgstr ""
+"<qt>選取此選項以使用指定的行事曆檔案，而不使用標準的 TDE 行事曆。此檔必須是 "
+"vCalendar 或 iCalendar 格式。請輸入檔案的位置，或使用檔案挑選器挑選。</qt>"
+
+#: conduits/vcalconduit/korganizerConduit.ui:141
+#, no-c-format
+msgid ""
+"<qt>Enter here the location and filename of the calendar file or select it "
+"clicking the file picker button. This file must be in the iCalendar or "
+"vCalendar format.</qt>"
+msgstr ""
+"<qt>您可以在此輸入要使用的行事曆檔案的位置，或直接點選檔案挑選器按鈕來挑選。"
+"檔案必須是 iCalendar 或 vCalendar 格式。</qt>"
+
+#: conduits/vcalconduit/korganizerConduit.ui:151
+#, no-c-format
+msgid "Store &archived records in the TDE calendar"
+msgstr "在 TDE 行事曆中儲存歸檔的紀錄(&A)"
+
+#: conduits/vcalconduit/korganizerConduit.ui:154
+#, no-c-format
+msgid ""
+"When this box is checked, archived records will still\n"
+"be saved in the calendar on the PC."
+msgstr "勾選此選項的話，歸檔的紀錄會被儲存在 PC 端的行事曆中。"
+
+#: conduits/vcalconduit/korganizerConduit.ui:233
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
+"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
+"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
+"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
+"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
+"entry on both the PC and handheld. Note that this does <i>not</i> handle "
+"double-scheduling conflicts.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目（您在掌上型裝置跟 PC 中都有修改的項"
+"目）。可用的選項包括：「使用 KPilot 全域設定」會直接使用在 KPilot 熱同步設定"
+"中的設定；「詢問使用者」則會每次都詢問使用者的意見；「不做任何事」就是維持原"
+"狀；還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等，最後「兩個"
+"項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。要注意的是，這個選"
+"項並<i>不會</i>處理雙重行程（double-scheduling）的衝突。</qt>"
+
+#: kpilot/dbFlagsEditor_base.ui:32
+#, no-c-format
+msgid "Database &name:"
+msgstr "資料庫名稱(&N)："
+
+#: kpilot/dbFlagsEditor_base.ui:51
+#, no-c-format
+msgid "&Creator:"
+msgstr "建立者(&C)："
+
+#: kpilot/dbFlagsEditor_base.ui:70
+#, no-c-format
+msgid "&Type:"
+msgstr "類型(&T)："
+
+#: kpilot/dbFlagsEditor_base.ui:97
+#, no-c-format
+msgid "Database Flags"
+msgstr "資料庫旗標"
+
+#: kpilot/dbFlagsEditor_base.ui:108
+#, no-c-format
+msgid "&Ressource database"
+msgstr "資源資料庫"
+
+#: kpilot/dbFlagsEditor_base.ui:116
+#, no-c-format
+msgid "Rea&d-only"
+msgstr "唯讀(&D)"
+
+#: kpilot/dbFlagsEditor_base.ui:124
+#, no-c-format
+msgid "Database is &backed up"
+msgstr "資料庫已備份(&B)"
+
+#: kpilot/dbFlagsEditor_base.ui:132
+#, no-c-format
+msgid "Copy &protected"
+msgstr "拷貝防護(&P)"
+
+#: kpilot/dbFlagsEditor_base.ui:159
+#, no-c-format
+msgid "Misc Flags"
+msgstr "雜項旗標"
+
+#: kpilot/dbFlagsEditor_base.ui:187
+#, no-c-format
+msgid "Reset after &installation"
+msgstr "安裝後重置(&I)"
+
+#: kpilot/dbFlagsEditor_base.ui:195
+#, no-c-format
+msgid "E&xclude from sync"
+msgstr "從同步排除(&X)"
+
+#: kpilot/dbFlagsEditor_base.ui:205
+#, no-c-format
+msgid "Time Stamps"
+msgstr "時間"
+
+#: kpilot/dbFlagsEditor_base.ui:224
+#, no-c-format
+msgid "Cr&eation time:"
+msgstr "建立時間(&E)："
+
+#: kpilot/dbFlagsEditor_base.ui:235
+#, no-c-format
+msgid "&Modification time:"
+msgstr "變更時間(&M)："
+
+#: kpilot/dbFlagsEditor_base.ui:246
+#, no-c-format
+msgid "Back&up time:"
+msgstr "備份時間(&U)："
+
+#: kpilot/dbRecordEditor_base.ui:89
+#, no-c-format
+msgid "&Deleted"
+msgstr "已刪除(&D)"
+
+#: kpilot/dbRecordEditor_base.ui:97
+#, no-c-format
+msgid "Busy"
+msgstr "忙碌"
+
+#: kpilot/dbSelection_base.ui:23
+#, no-c-format
+msgid "Database"
+msgstr "資料庫"
+
+#: kpilot/dbSelection_base.ui:60
+#, no-c-format
+msgid "&Add"
+msgstr "新增(&A)"
+
+#: kpilot/kpilot.kcfg:10 kpilot/kpilot.kcfg:15 kpilot/kpilot.kcfg:20
+#: kpilot/kpilot.kcfg:26 kpilot/kpilot.kcfg:31 kpilot/kpilot.kcfg:36
+#: kpilot/kpilot.kcfg:41 kpilot/kpilot.kcfg:55 kpilot/kpilot.kcfg:60
+#: kpilot/kpilot.kcfg:65 kpilot/kpilot.kcfg:70 kpilot/kpilot.kcfg:75
+#: kpilot/kpilot.kcfg:82 kpilot/kpilot.kcfg:87 kpilot/kpilot.kcfg:92
+#: kpilot/kpilot.kcfg:100 kpilot/kpilot.kcfg:105 kpilot/kpilot.kcfg:114
+#: kpilot/kpilot.kcfg:127 kpilot/kpilot.kcfg:132 kpilot/kpilot.kcfg:150
+#: kpilot/kpilot.kcfg:158 kpilot/kpilot.kcfg:162 kpilot/kpilot.kcfg:166
+#: kpilot/kpilot.kcfg:174 kpilot/kpilot.kcfg:179
+#, no-c-format
+msgid ""
+"\n"
+"        "
+msgstr ""
+
+#: kpilot/kpilot.kcfg:110
+#, no-c-format
+msgid "Which databases not to backup."
+msgstr ""
+
+#: kpilot/kpilot.kcfg:137
+#, fuzzy, no-c-format
+msgid "Prevent HotSync when screen locked"
+msgstr "螢幕鎖定時，熱同步會被關閉。"
+
+#: kpilot/kpilot.kcfg:138
+#, no-c-format
+msgid ""
+"Turning this option on prevents syncing\n"
+"\twhen the screen is locked. This is a security measure\n"
+"\tto prevent people from stealing your data through physical\n"
+"\taccess to a Pilot device link to your machine.\n"
+"\tIt doesn't work with screensavers other than TDE, though,\n"
+"\tso you will need to turn it off for other environments."
+msgstr ""
+
+#: kpilot/kpilotConfigDialog_backup.ui:18
+#: kpilot/kpilotConfigDialog_device.ui:18
+#: kpilot/kpilotConfigDialog_startup.ui:19 kpilot/kpilotConfigDialog_sync.ui:18
+#: kpilot/kpilotConfigDialog_viewers.ui:19
+#, no-c-format
+msgid "KPilot Options"
+msgstr "KPilot 選項"
+
+#: kpilot/kpilotConfigDialog_backup.ui:29
+#, no-c-format
+msgid "Backup Frequency"
+msgstr "備份頻率"
+
+#: kpilot/kpilotConfigDialog_backup.ui:54
+#, no-c-format
+msgid "Do &backup:"
+msgstr "執行備份(&B)："
+
+#: kpilot/kpilotConfigDialog_backup.ui:63
+#, no-c-format
+msgid "On every HotSync"
+msgstr "每次熱同步時"
+
+#: kpilot/kpilotConfigDialog_backup.ui:68
+#, no-c-format
+msgid "On request only"
+msgstr "只在使用者要求時"
+
+#: kpilot/kpilotConfigDialog_backup.ui:90
+#, no-c-format
+msgid "Databases"
+msgstr "資料庫"
+
+#: kpilot/kpilotConfigDialog_backup.ui:107
+#, no-c-format
+msgid "&No backup:"
+msgstr "無備份(&N)："
+
+#: kpilot/kpilotConfigDialog_backup.ui:113
+#: kpilot/kpilotConfigDialog_backup.ui:141
+#, no-c-format
+msgid ""
+"<qt><p>Enter the databases types you wish to exclude from the backup "
+"operation here. Use this setting if backing up some databases crashes the "
+"handheld, or if you do not want a backup of some databases (like AvantGo "
+"pages).</p><p>Entries with square brackets [] are <i>creator codes</i> like "
+"<tt>[lnch]</tt> and can exclude a whole range of databases. Entries without "
+"the brackets list database names, and may include shell-style wildcards, "
+"like <tt>*_a68k</tt>.</p></qt>"
+msgstr ""
+"<qt><p>請在此輸入您在備份時要排除的資料庫型態。如果在備份某些資料庫時會造成掌"
+"上型裝置當機的話，或是您不想備份某些資料庫（如 AvantGo 頁面），您可以使用此選"
+"項。</p><p>使用方括號 [] 括起來的項目為建立者代碼（<i>Creator codes</i>），像"
+"是 <tt>[Inch]</tt>，可以排除整個範圍的資料庫。沒有用方括號括起來的文字則是資"
+"料庫名稱，可以包含萬用字元，如 <tt>*_a68k</tt>。</p></qt>"
+
+#: kpilot/kpilotConfigDialog_backup.ui:127
+#, no-c-format
+msgid "Not &restored:"
+msgstr "不回復(&R)："
+
+#: kpilot/kpilotConfigDialog_backup.ui:133
+#: kpilot/kpilotConfigDialog_backup.ui:149
+#, no-c-format
+msgid ""
+"<qt><p>Enter the databases types you wish to exclude from the restore "
+"operation here (like AvantGo databases). They will be skipped even if they "
+"exist in the set of backup databases on the handheld. If you still want to "
+"install an ignored database to the handheld, you can always manually install "
+"it to the handheld.</p><p>Entries with square brackets [] are <i>creator "
+"codes</i> like <tt>[lnch]</tt> and can exclude a whole range of databases. "
+"Entries without the brackets list database names, and may include shell-"
+"style wildcards, like <tt>*_a68k</tt>.</p></qt>"
+msgstr ""
+"<qt><p>請在此輸入您在回復資料庫時要排除的資料庫型態（如 AvantGo 資料庫）。它"
+"們會在回復動作時被略過，即使在掌上型裝置有設定要備份。如果您要將一個被排除的"
+"資料庫安裝到掌上型裝置，您可以手動安裝。</p><p>使用方括號 [] 括起來的項目為建"
+"立者代碼（<i>Creator codes</i>），像是 <tt>[Inch]</tt>，可以排除整個範圍的資"
+"料庫。沒有用方括號括起來的文字則是資料庫名稱，可以包含萬用字元，如 "
+"<tt>*_a68k</tt>。</qt>"
+
+#: kpilot/kpilotConfigDialog_backup.ui:157
+#: kpilot/kpilotConfigDialog_backup.ui:168
+#, no-c-format
+msgid "..."
+msgstr "..."
+
+#: kpilot/kpilotConfigDialog_backup.ui:160
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you "
+"to check the databases you want to exclude from the backup from a list.</qt>"
+msgstr ""
+"<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在備份時排除的資"
+"料庫。</qt>"
+
+#: kpilot/kpilotConfigDialog_backup.ui:171
+#, no-c-format
+msgid ""
+"<qt>Click here to open the database selection dialog. This dialog allows you "
+"to select the databases you want to exclude from the restore operation from "
+"a list.</qt>"
+msgstr ""
+"<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在回復時排除的資"
+"料庫。</qt>"
+
+#: kpilot/kpilotConfigDialog_backup.ui:181
+#, no-c-format
+msgid "Run conduits durin&g a backup sync"
+msgstr "在備份同步時執行導管(&G)"
+
+#: kpilot/kpilotConfigDialog_backup.ui:184
+#, no-c-format
+msgid ""
+"<qt>Check this box to run the selected conduits before every backup. This "
+"makes sure the backup is up to date with the last changes from your PC.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，在每次備份前會先執行所選取的導管。這能確保您的備份是 PC "
+"上修改過的最新的資料。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:29
+#, no-c-format
+msgid "Pilot &device:"
+msgstr "Pilot 裝置(&D)："
+
+#: kpilot/kpilotConfigDialog_device.ui:35
+#: kpilot/kpilotConfigDialog_device.ui:43
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
+"the correct device. You need write permission to successfully synchronize "
+"with the handheld.</qt>"
+msgstr ""
+"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> 並將它連到正確的裝"
+"置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:51
+#, no-c-format
+msgid "&Speed:"
+msgstr "速度(&S)："
+
+#: kpilot/kpilotConfigDialog_device.ui:57
+#: kpilot/kpilotConfigDialog_device.ui:115
+#, no-c-format
+msgid ""
+"<qt>Select the speed of the serial connection to your handheld here. This "
+"has no meaning for USB devices. For an older model, choose 9600. Newer "
+"models may be able to handle speeds up to the maximum listed, 115200. You "
+"can experiment with the connection speed: the manual suggests starting at a "
+"speed of 19200 and trying faster speeds to see if they work.</qt>"
+msgstr ""
+"<qt>請在此選擇序列埠連接的速度。這個選項與 USB 連線無關。對一些舊式的裝置，請"
+"選擇 9600。新一點的裝置可以上到 115200。您可以實驗一下看看哪個速度才正確：手"
+"冊的建議是從 19200 開始試，如果看起來可以，就加快速度試試。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:65
+#: kpilot/kpilotConfigDialog_device.ui:143
+#, no-c-format
+msgid ""
+"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting.</qt>"
+msgstr ""
+"<qt>請在此輸入您的姓名，必須與 Pilot 上的 &quot;Owner&quot; 設定一樣。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:88
+#, no-c-format
+msgid "9600"
+msgstr "9600"
+
+#: kpilot/kpilotConfigDialog_device.ui:93
+#, no-c-format
+msgid "19200"
+msgstr "19200"
+
+#: kpilot/kpilotConfigDialog_device.ui:98
+#, no-c-format
+msgid "38400"
+msgstr "38400"
+
+#: kpilot/kpilotConfigDialog_device.ui:103
+#, no-c-format
+msgid "57600"
+msgstr "57600"
+
+#: kpilot/kpilotConfigDialog_device.ui:108
+#, no-c-format
+msgid "115200"
+msgstr "115200"
+
+#: kpilot/kpilotConfigDialog_device.ui:123
+#, no-c-format
+msgid "En&coding:"
+msgstr "編碼(&C)："
+
+#: kpilot/kpilotConfigDialog_device.ui:129
+#: kpilot/kpilotConfigDialog_device.ui:154
+#, no-c-format
+msgid ""
+"<qt>PalmOS devices are available in many different languages. If your device "
+"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
+"encoding here, in order to display special characters correctly.</qt>"
+msgstr ""
+"<qt>PalmOS 裝置提供了多國語言。如果您的裝置使用與 ISO-latin1（ISO8859-1）不同"
+"的語言，請在此選擇正確的編碼，以顯示正確的字元。</qt>"
+
+#: kpilot/kpilotConfigDialog_device.ui:137
+#, no-c-format
+msgid "Pilot &user:"
+msgstr "Pilot 使用者(&U)："
+
+#: kpilot/kpilotConfigDialog_device.ui:162
+#, no-c-format
+msgid "&Workarounds:"
+msgstr "開發中選項(&W)："
+
+#: kpilot/kpilotConfigDialog_device.ui:171
+#, no-c-format
+msgid "None"
+msgstr "無"
+
+#: kpilot/kpilotConfigDialog_device.ui:176
+#, no-c-format
+msgid "Zire 31, 72, Tungsten T5"
+msgstr "Zire 31, 72, Tungsten T5"
+
+#: kpilot/kpilotConfigDialog_device.ui:183
+#, no-c-format
+msgid ""
+"<qt>Workarounds enable special handling for specific devices. Most devices "
+"do not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten "
+"T5 <i>do</i> have special needs, so if you are connecting such a device, "
+"please select the workaround for them.</qt>"
+msgstr ""
+"<qt>開發中選項（Workarounds）會針對一些特殊的裝置開啟特殊的處理。大部份的裝置"
+"都不需要特殊處理。不過像 Zire&tm; 31，Zire 72 與 Tungsten T5 就有特殊需求，因"
+"此若您是使用這類的裝置，請選擇此選項。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:33
+#, no-c-format
+msgid "Exit Options"
+msgstr "離開選項"
+
+#: kpilot/kpilotConfigDialog_startup.ui:44
+#, no-c-format
+msgid "S&top KPilot's system tray application on exit"
+msgstr "離開時停止 KPilot 的系統匣應用程式(&T)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:47
+#, no-c-format
+msgid ""
+"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
+"KPilot started the daemon itself).</qt>"
+msgstr ""
+"<qt>勾選此選項的話，當您離開 KPilot 時，會同時中止 KPilot 守護程式（只在 "
+"KPilot 自己啟動守護程式時有效）。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:55
+#, no-c-format
+msgid "Quit &after HotSync"
+msgstr "熱同步後離開(&A)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:58
+#, no-c-format
+msgid ""
+"<qt>Check this box to stop both KPilot and the KPilot daemon after the "
+"HotSync finishes. This may be useful for systems where KPilot is started by "
+"the USB daemon.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會在熱同步完成後同時停止 KPilot 與 KPilot 守護程式。如果 "
+"KPilot 是由 USB 守護程式叫出來的，您就可以使用這個選項。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:68
+#, no-c-format
+msgid "Startup Options"
+msgstr "啟動選項"
+
+#: kpilot/kpilotConfigDialog_startup.ui:79
+#: kpilot/kpilotConfigWizard_user.ui:133
+#, no-c-format
+msgid "&Start KPilot at login"
+msgstr "登入時啟動 KPilot(&S)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:82
+#, no-c-format
+msgid ""
+"<qt>Check this box to start up the KPilot daemon every time you log in to "
+"TDE.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，每次您登入 TDE 時就會自動啟動 KPilot 守護程式。</qt>"
+
+#: kpilot/kpilotConfigDialog_startup.ui:90
+#, no-c-format
+msgid "S&how KPilot in system tray"
+msgstr "在系統匣中顯示 KPilot(&H)"
+
+#: kpilot/kpilotConfigDialog_startup.ui:93
+#, no-c-format
+msgid ""
+"<qt>Check this box to place a Kpilot icon in the system tray, which shows "
+"the daemon's status, and allows you to select the next sync type and to "
+"configure KPilot.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會在系統匣內顯示 KPilot 圖示，告訴您目前守護程式的狀態，"
+"並允許您選擇下一次同步的模式，以及設定 KPilot。</qt>"
+
+#: kpilot/kpilotConfigDialog_sync.ui:32
+#, no-c-format
+msgid "Do full sync when chan&ging PCs"
+msgstr "變更 PC 時執行完整同步(&G)"
+
+#: kpilot/kpilotConfigDialog_sync.ui:38
+#, no-c-format
+msgid ""
+"<qt>Check this box to perform a full sync when your last sync was performed "
+"with another PC or system, to guarantee the completeness of your data.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，若您最後一次同步是在另一台 PC 或系統上執行的，則會做一次"
+"完整的同步，以保證您資料的完整性。</qt>"
+
+#: kpilot/kpilotConfigDialog_sync.ui:44
+#, no-c-format
+msgid "HotSync (sync all changes)"
+msgstr "熱同步（同步所有變更）"
+
+#: kpilot/kpilotConfigDialog_sync.ui:49
+#, no-c-format
+msgid "FullSync (sync also unchanged records)"
+msgstr "完整同步（包括未變更的紀錄）"
+
+#: kpilot/kpilotConfigDialog_sync.ui:66
+#, no-c-format
+msgid ""
+"<qt>Select in this list the synchronization type that KPilot will use as "
+"default. Possible values are:<br>\"HotSync\", to run all selected conduits, "
+"and sync the databases with a modified flag set, updating the modified "
+"records only;<br>\"FullSync\" to run all selected conduits, and sync all "
+"databases, reading all records, and performing a full backup;<br>\"Copy PC "
+"to handheld\" to run all conduits and sync all databases, but instead of "
+"merging the information from both sources, copy the PC data to the handheld;"
+"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
+"instead of merging the information from both sources, copy the handheld data "
+"to the PC.</qt>"
+msgstr ""
+"<qt>在此清單中選取 KPilot 預設使用的同步方式。可用的選項包括：<br> 「熱同步」"
+"（HotSync）會執行所有選取的導管，並同步更新有變更過的資料庫紀錄。<br> 「完整"
+"同步」（FullSync）會執行所有選取的導管，以及同步所有的資料庫，讀取所有的紀"
+"錄，並做完整的備份。<br> 「從 PC 複製到掌上型裝置」會執行所有的導管，並同步所"
+"有的資料庫，但是方向只從 PC 同步到掌上型裝置，而不做兩邊的合併。<br> 「從掌上"
+"型裝置複製到 PC」會執行所有的導管，並同步所有的資料庫，但是方向只從掌上型裝置"
+"同步到 PC，而不做兩邊的合併。<br></qt>"
+
+#: kpilot/kpilotConfigDialog_sync.ui:74
+#, no-c-format
+msgid "&Default sync:"
+msgstr "預設同步(&D)："
+
+#: kpilot/kpilotConfigDialog_sync.ui:132
+#, no-c-format
+msgid ""
+"<qt>Select in this list how conflicting entries (entries which were edited "
+"both on your handheld and on the PC) are resolved. Possibly values are  "
+"\"Ask User\" to let you decide case by case, \"Do Nothing\" to allow the "
+"entries to be different, \"PC overrides\", \"Handheld overrides\", \"Use "
+"values from last sync\" and \"Use both entries\" to create a new entry on "
+"both the PC and handheld. Note that the conflict resolution option selected "
+"here can be overridden by conduits that have their own conflict resolution "
+"configuration.</qt>"
+msgstr ""
+"<qt>在此清單中選擇要如何處理衝突的項目（您在掌上型裝置跟 PC 中都有修改的項"
+"目）。可用的選項包括：「詢問使用者」會每次都詢問使用者的意見；「不做任何事」"
+"就是維持原狀；還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等，"
+"最後「兩個項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。要注意的"
+"是，若是使用的導管本身就有設定解決衝突的方式，則這裡選取的選項會被忽略。</qt>"
+
+#: kpilot/kpilotConfigDialog_sync.ui:159
+#, no-c-format
+msgid "Do not sync when screensaver is active"
+msgstr "螢幕保護程式啟動時不要同步"
+
+#: kpilot/kpilotConfigDialog_sync.ui:165
+#, no-c-format
+msgid ""
+"<qt>Check this box to prevent KPilot from syncing your handheld while the "
+"screensaver is active: this is a security measure to prevent others from "
+"syncing <i>their</i> handhelds with your data.  This option must be disabled "
+"when you use a different desktop, since KPilot is not aware of screensavers "
+"other than TDE's.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會避免讓 KPilot 在螢幕保護程式啟動的期間去同步您的掌上型"
+"裝置：這是為了安全性考量，避免其它人用他們自己的掌上型裝置來「竊取」您的資"
+"料。不過若是您使用的是不同的桌面系統，則必須關閉此選項，因為 KPilot 只認得 "
+"TDE 的螢幕保護程式。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:47
+#, no-c-format
+msgid "Make internal viewers &editable"
+msgstr "讓內部檢視器可以編輯(&E)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:53
+#, no-c-format
+msgid ""
+"<qt>The internal viewers can be read only or editable. The editable mode "
+"allows you to add new records, delete or edit the existing records and sync "
+"your modifications back to the handheld. Check this box to set the internal "
+"viewers to editable mode, uncheck to set them to read only mode.</qt>"
+msgstr ""
+"<qt>內部檢視器可以選擇要唯讀或是可編輯。可編輯模式讓您可以新增、刪除或編輯現"
+"有的紀錄，並同步到您的掌上型裝置。勾選此選項表示開啟可編輯模式，取消勾選則設"
+"為唯讀模式。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:61
+#, no-c-format
+msgid "&Show private records"
+msgstr "顯示私人紀錄(&S)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:64
+#, no-c-format
+msgid ""
+"<qt>Check this box to display in the internal viewers records that are "
+"marked &quot;Private&quot; in the Pilot.</qt>"
+msgstr ""
+"<qt>勾選此選項的話，會在內部檢視器顯示在 Pilot 上被標記為私人（&quot;"
+"Private&quot;）的紀錄。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:85
+#, no-c-format
+msgid "Show as \"&Last, first\""
+msgstr "顯示為「姓，名」(&L)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:88
+#, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by last name, first name.</qt>"
+msgstr ""
+"<qt>選取此選項的話，在內部地址檢視器上顯示地址時，會依「姓，名」來排序。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:96
+#, no-c-format
+msgid "Show as \"&Company, last\""
+msgstr "顯示為「公司，姓」(&C)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:99
+#, no-c-format
+msgid ""
+"<qt>Select this option to display addresses in the internal address viewer "
+"sorted by company name, last name.</qt>"
+msgstr ""
+"<qt>選取此選項的話，在內部地址檢視器上顯示地址時，會依「公司名稱，姓」來排"
+"序。</qt>"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:121
+#, no-c-format
+msgid "&Use key field"
+msgstr "使用主欄位(&U)"
+
+#: kpilot/kpilotConfigDialog_viewers.ui:124
+#, no-c-format
+msgid ""
+"<qt>Check this box to combine all entries with the same last name in the "
+"internal address viewer.</qt>"
+msgstr ""
+"<qt>選取此選項的話，在內部地址檢視器上顯示地址時，會將相同姓氏的紀錄組合在一"
+"起。</qt>"
+
+#: kpilot/kpilotConfigWizard_app.ui:24
+#, no-c-format
+msgid ""
+"Finally, you can configure KPilot specifically for some PIM applications, "
+"like Kontact (TDE's integrated PIM application) or Evolution (GNOME's "
+"integrated PIM application).\n"
+"\n"
+"Press \"Finish\" to setup KPilot according to the settings in this "
+"configuration Wizard."
+msgstr ""
+"最後，您可以設定 KPilot 指定一些個人資訊管理的應用程式，如 Kontack（TDE 的個"
+"人資訊管理整合應用程式），或是 Evolution（GNOME 的個人資訊管理整合應用程"
+"式）。\n"
+"\n"
+"設定好後按下「完成」。"
+
+#: kpilot/kpilotConfigWizard_app.ui:37
+#, no-c-format
+msgid "Set Default Values for Syncing With"
+msgstr "設定同步預設值"
+
+#: kpilot/kpilotConfigWizard_app.ui:48
+#, no-c-format
+msgid "&TDE-PIM suite (Kontact)"
+msgstr "TDE-PIM 套件(Kontact)(&K)"
+
+#: kpilot/kpilotConfigWizard_app.ui:59
+#, no-c-format
+msgid "&GNOME-PIM (Evolution)"
+msgstr "GNOME-PIM (Evolution)(&G)"
+
+#: kpilot/kpilotConfigWizard_app.ui:67
+#, no-c-format
+msgid "No sync, just backup"
+msgstr "不同步，只備份"
+
+#: kpilot/kpilotConfigWizard_user.ui:24
+#, no-c-format
+msgid "This wizard will help you configure KPilot."
+msgstr "這個精靈會協助您設定 KPilot。"
+
+#: kpilot/kpilotConfigWizard_user.ui:35
+#, no-c-format
+msgid ""
+"As a first step, we need to determine the user name and how the handheld is "
+"connected to the computer."
+msgstr "在第一個步驟中，我們要決定使用者名稱，以及掌上型裝置要怎麼連到電腦上。"
+
+#: kpilot/kpilotConfigWizard_user.ui:46
+#, no-c-format
+msgid "Handheld && User Name"
+msgstr "掌上型裝置與使用者名稱"
+
+#: kpilot/kpilotConfigWizard_user.ui:49
+#, no-c-format
+msgid ""
+"<p>You can either let KPilot detect these values automatically (for this you "
+"need your handheld ready and connected to the PC)  or enter them manually.</"
+"p>\n"
+"<p>Please enter the username exactly as set on the handheld. </p>\n"
+"<p>If setting the device type manually (i.e., if automatic detection did not "
+"work for you), please look below for tips on choosing the right device "
+"name.  {0...n} means a number from 0 up to a very large number, though "
+"usually just 255.\n"
+"<p>\n"
+"Serial Port: an old method of connection, used primarily by the original "
+"line of Palm Pilots, and various Palm-based cellphones.  Device name will "
+"look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"USB Port: A newer style of connection, used by most newer Palms, "
+"Handsprings, and Sony Clies.  Device name will look like /dev/ttyUSB{0...n} "
+"or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD).  On Linux, "
+"definitely check both 0 and 1: newer devices tend to use 1; older devices "
+"tend to use 0.</p>\n"
+"<p>\n"
+"Infrared: (pronounced infra-red) is a relatively slow connection type used "
+"solely as a last resort.  Device name will be /dev/ircomm0 or /dev/ttyS{0..."
+"n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
+"<p>\n"
+"Bluetooth: A new connection method, this is used almost exclusively on new, "
+"high-end devices, like the Tungsten T3 or the Zire 72.  Device name will be /"
+"dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
+"(FreeBSD).</p>\n"
+"<p>\n"
+"Network: This has not been tested by any of the KPilot developers themselves "
+"(hardware donations always accepted!), but it has been reported that setting "
+"the device to \"net:any\" will work for network-enabled devices.  However, "
+"this has also been known to lock KPilot up when doing anything other than "
+"just syncing. Use it with caution.\n"
+"</p>"
+msgstr ""
+"<p>您可以讓 KPilot 自動偵測這些值（您當然要先將您的掌上型裝置連到您的電腦"
+"上），或是自己手動輸入這些值。</p>\n"
+"<p>請輸入掌上型裝置上設定的使用者名稱。</p>\n"
+"<p>如果無法自動偵測，您必須手動輸入裝置型態時，請先參考底下的提示，以選擇正確"
+"的裝置名稱。{0...n} 表示從 0 到 n，通常 n 不超過 255。</p>\n"
+"<p>序列埠：舊式的連接方式，主要用於早期的 Palm Pilots，以及一些 Palm 的行動電"
+"話。它們的裝置名稱會是 /dev/ttyS{0...n}（在 Linux 上）或是 /dev/cuaa{0...n}"
+"（在 FreeBSD 上）。</p>\n"
+"<p>USB 埠：新式的連線方式，主要用於新的 Palms，Handsprings 與 Sony Clies 系"
+"列。裝置名稱會是 /dev/ttyUSB{0...n}（在 Linux 上）或是 /dev/ucom{0...n}（在 "
+"FreeBSD 上）。在 Linux 上，您要同時試試 0 跟 1，因為新式的裝置會用 1，而較舊"
+"的裝置會用 0。</p>\n"
+"<p>紅外線：速度比較慢，通常只用於最後的救急。裝置名稱會是 /dev/ircomm0 或 /"
+"dev/ttyS{0...b}（在 Linux 上），或是 /dev/sio{0...n}（在 FreeBSD 上）。</p>\n"
+"<p>藍芽：新式的連線方式，通常只用於新的，高檔的裝置，如 Tungsten T3 或 Zire "
+"72。裝置名稱會是 /dev/usb/ttub/{0...n} 或 /dev/ttyUB{0...n}（在 Linux 上），"
+"或是 /dev/ttyp{0...n}（在 FreeBSD 上）。</p>\n"
+"<p>網路：目前尚未經過任何 KPilot 開發者的測試（有人要捐獻硬體嗎？），不過已經"
+"有回報，將裝置設為 \"net:any\" 可以在開啟網路的裝置上運作。不過，也有人回報說"
+"使用這個選項只能做同步，其他的動作都會鎖死 KPilot。所以請小心使用。</p></p>"
+
+#: kpilot/kpilotConfigWizard_user.ui:73
+#, no-c-format
+msgid "&Device:"
+msgstr "裝置(&D)："
+
+#: kpilot/kpilotConfigWizard_user.ui:79 kpilot/kpilotConfigWizard_user.ui:101
+#, no-c-format
+msgid ""
+"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
+"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
+"the correct device. Use the button below to automatically detect the device. "
+"You need write permission to successfully synchronize with the handheld.</qt>"
+msgstr ""
+"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> 並將它連到正確的裝"
+"置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
+
+#: kpilot/kpilotConfigWizard_user.ui:87
+#, no-c-format
+msgid "&Automatically Detect Handheld && User Name"
+msgstr "自動偵測掌上型裝置與使用者名稱(&A)"
+
+#: kpilot/kpilotConfigWizard_user.ui:90
+#, no-c-format
+msgid ""
+"<qt>Click this button to open the detection dialog. The wizard will try to "
+"automatically find and display the correct device and username for your "
+"handheld. If the wizard cannot retrieve this information, check if you have "
+"write permission for the device.</qt>"
+msgstr ""
+"<qt>點擊此按鍵開啟偵測對話框。這個精靈會試著自動找出您的掌上型裝置，並顯示使"
+"用者名稱。如果精靈無法取得這些資訊，請檢查您是否對該裝置有寫入的權限。</qt>"
+
+#: kpilot/kpilotConfigWizard_user.ui:98
+#, no-c-format
+msgid "/dev/pilot"
+msgstr "/dev/pilot"
+
+#: kpilot/kpilotConfigWizard_user.ui:109 kpilot/kpilotConfigWizard_user.ui:123
+#, no-c-format
+msgid ""
+"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
+"setting, or use the button below to automatically detect it.</qt>"
+msgstr ""
+"<qt>請在此輸入您的使用者名稱，必須與 Pilot 上的 &quot;Owner&quot; 設定一樣，"
+"或是用底下的按鍵來自動偵測。</qt>"
+
+#: kpilot/kpilotConfigWizard_user.ui:117
+#, no-c-format
+msgid "User na&me:"
+msgstr "使用者名稱(&M)："
+
+#: kpilot/kpilotConfigWizard_user.ui:139
+#, no-c-format
+msgid ""
+"<qt>Check this box to make the kpilot daemon load when you first log in "
+"until you log out.  That means (in theory), that you should not have to do "
+"anything other than connect your handheld and push \"sync\", and kpilot will "
+"appear and magically do your bidding. </qt>"
+msgstr ""
+"<qt>勾選此選項的話，當您當入時 KPilot 守護程式會自動載入，直到您登出。這表示"
+"（理論上）您不需要做什麼，只需要連上您的掌上型裝置，然後按下「同步」，KPilot "
+"就會自動出現並神奇地照您的吩咐工作。</qt>"
+
+#: kpilot/todoEditor_base.ui:32
+#, no-c-format
+msgid "&Description:"
+msgstr "描述(&D)："
+
+#: kpilot/todoEditor_base.ui:54
+#, no-c-format
+msgid "&Note:"
+msgstr "附註(&N)："
+
+#: kpilot/todoEditor_base.ui:71
+#, no-c-format
+msgid "Ca&tegory:"
+msgstr "類別(&T)："
+
+#: kpilot/todoEditor_base.ui:90
+#, no-c-format
+msgid "&Priority:"
+msgstr "優先等級(&P)："
+
+#: kpilot/todoEditor_base.ui:104
+#, no-c-format
+msgid "2"
+msgstr "2"
+
+#: kpilot/todoEditor_base.ui:109
+#, no-c-format
+msgid "3"
+msgstr "3"
+
+#: kpilot/todoEditor_base.ui:114
+#, no-c-format
+msgid "4"
+msgstr "4"
+
+#: kpilot/todoEditor_base.ui:119
+#, no-c-format
+msgid "5"
+msgstr "5"
+
+#: kpilot/todoEditor_base.ui:147
+#, no-c-format
+msgid "&Completed"
+msgstr "已完成(&C)"
+
+#: kpilot/todoEditor_base.ui:155
+#, no-c-format
+msgid "Has &end date:"
+msgstr "有結束日期(&E)："
+
+#, fuzzy
+#~ msgid "&Delete"
+#~ msgstr "已刪除(&D)"
+
+#, fuzzy
+#~ msgid "Configuration"
+#~ msgstr "組態精靈"
+
+#, fuzzy
+#~ msgid "&Settings"
+#~ msgstr "區域化設定"