Drop scons build support.

Deleted empty file ChangeLog.
Update some cmake files with latest macros.
Add basic cmake build instructions.
Few cosmetics.

Signed-off-by: gregory guy <[email protected]>

18 files changed, 55 insertions, 2401 deletions

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 6366af0..a2c96c6 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -41,7 +41,7 @@ tde_setup_paths( )
 
 ##### optional stuff
 
-option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
+option( WITH_ALL_OPTIONS    "Enable all optional support" OFF )
 option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
 
 
@@ -69,7 +69,7 @@ set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined"
 ##### directories
 
 add_subdirectory( src )
-tde_conditional_add_subdirectory( BUILD_DOC          doc )
+tde_conditional_add_subdirectory( BUILD_DOC doc )
 tde_conditional_add_subdirectory( BUILD_TRANSLATIONS po  )
 
 
diff --git a/ChangeLog b/ChangeLog
deleted file mode 100644
index 0519ecb..0000000
--- a/ChangeLog
+++ /dev/null
@@ -1 +0,0 @@
- 
\ No newline at end of file
diff --git a/INSTALL b/INSTALL
index 63bb8f2..855bbd5 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,84 +1,17 @@
-sctest REQUIREMENTS
-------------------------
-
-tde is needed to run sctest
-
-To compile sctest, the tde development packages
-are needed: tdelibs-devel, tdebase-devel and python
-
-scons is also needed http://www.scons.org
-(this tool also used by Blender, ..)
-Make sure scons is at least v0.96.1, otherwise
-the compilation will fail. In case if you do not have
-it, a minimum distribution is provided (see SCONS below)
-
--> One should only have to run :
-$ scons
-# scons install
-(do "scons install" as root - the menus may not
-show up if you skip this step)
-
-
-SCONS
------
-
--> If scons is missing, use the one bundled with PROGRAMNAME :
-./unpack_local_scons.sh
-python scons.py
-python scons.py install
-(run the last command as root)
-
-
--> For your convenience, a quick makefile is created :
-./unpack_local_scons.sh
-make
-make install
-
-
-USEFUL SCONS COMMANDS
----------------------
-
-build the targets   : scons
-install them        : scons install
-clean the project   : scons -c
-uninstall           : scons -c install
-build in parallel   : scons -j2
-
-CONFIGURATION NOTES
--------------------
-
-The installation scripts are relying on the tde-config program.
-The programs tde-config, qmake, uic and moc must be accesssible
-through your PATH.
-
-Qt and tde may not be installed as expected (in TQTDIR and TDEDIR)
-So until tde-config is able to give that information, you may
-have to give those paths.
-
-Here are some examples :
-On Fedora/Redhat
-   scons configure kdeincludes=/usr/include/tde/
-On Debian
-   scons configure qtincludes=/usr/include/qt/ kdeinclude=/usr/include/tde/
-To install in some particular location with additional include paths
-   scons configure prefix=~/tmp extraincludes=/tmp/include:/usr/local/include
-
-For more options to tune the build look at the .py files available on 
-the top-level directory :
-generic.py, kde.py, ...
-
-The build system is based on bksys, a build system that replaces
-autoconf, automake and make in a row. Feel free to report your opinion
-about it to the authors.
-
-BUILDING RPMS OR DEBS WITH CHECKINSTALL
----------------------------------------
-
-With checkinstall 1.6, use
-$ scons
-# checkinstall --fstrans=no --nodoc scons install
-# scons uninstall
-
----------------------------------------
-enjoy KStreamRipper
-Michael Goettsche
+Basic Installation
+==================
+
+kstreamripper relies on cmake to build.
+
+Here are suggested default options:
+
+ -DCMAKE_EXPORT_COMPILE_COMMANDS="ON" \
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"
diff --git a/Makefile b/Makefile
deleted file mode 100644
index 8df7d48..0000000
--- a/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-all:
-	@/usr/bin/scons -Q
-
-# it is also possible to use
-# @/usr/bin/scons -Q -j4
-
-install:
-	@/usr/bin/scons -Q install
-
-clean:
-	@/usr/bin/scons -Q -c
-
-uninstall:
-	@/usr/bin/scons -Q -c install
-
-dist:
-	@/usr/bin/scons -Q dist
-
-distclean:
-	@/usr/bin/scons -Q distclean
diff --git a/README b/README
index 638915f..8f45f72 100644
--- a/README
+++ b/README
@@ -1 +1,22 @@
-see INSTALL
+
+  kstreamripper - a TDE frontend for streamripper
+
+
+KStreamRipper is a small frontend for the streamripper command 
+line utility (http://streamripper.sourceforge.net).
+Streamripper captures internet shoutcast radio streams on your harddisk
+and splits them up in mp3 files.
+KStreamRipper helps you with managing/ripping your preferred streams.
+
+
+
+ CONTRIBUTING
+==============
+
+If you wish to contribute to KStreamRipper (TDE), you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
diff --git a/SConstruct b/SConstruct
deleted file mode 100644
index 284e82c..0000000
--- a/SConstruct
+++ /dev/null
@@ -1,234 +0,0 @@
-#! /usr/bin/env python
-## The kde detection is located in kde.py (have a look!)
-## Delete the comments following as you see it fit
-
-"""
-scons files are python scripts, comments begin by a "#" symbol
-or are enclosed between sequences of triple quotes, so 
-this is a comment :)
-
-There is a lot of documentation and comments, but you can
-remove them when you convert your program
-"""
-
-"""
-----------------------------------
-How to enjoy bksys full and plenty
-(and forget about the autohell ? :)
------------------------------------
-
-The program scons is usually launched as "scons"
-When it is not intalled globally, one can run
-"python scons.py" instead (ie : to use the local scons 
-that comes with bksys - try ./unpack_local_scons.sh)
-
-To compile the project, you will then only need to launch
-scons on the top-level directory, the scripts find and
-cache the proper environment automatically :
--> scons
-(or python scons.py)
-
-To clean the project
--> scons -c
-(or python scons.py -c)
-
-To install the project
--> scons install
-(or python scons.py scons install)
-
-To uninstall the project
--> scons -c install
-
-To compile while being in a subdirectory
--> cd src; scons -u
-
-To (re)configure the project and give particular arguments, use ie :
--> scons configure debug=1
--> scons configure prefix=/tmp/ita debug=full extraincludes=/usr/local/include:/tmp/include prefix=/usr/local
-or -> python scons.py configure debug=1
-etc ..
-The variables are saved automatically after the first run
-(look at kde.cache.py, ..)
-
-Here is a quick list of options used (look at generic.py and kde.py) :
-prefix
-exec_prefix
-datadir
-libdir
-kdeincludes
-qtincludes
-tdelibs
-tqtlibs
-extraincludes (a list of paths separated by ':')
-
-"""
-
-###########################################
-## Common section, for loading the tools
-
-## Load the builders in config
-env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde'], toolpath=['./', './admin'])
-#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'cg'], toolpath=['./'])
-#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'sound'], toolpath=['./'])
-#env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'libxml'], toolpath=['./'])
-
-## the configuration should be done by now, quit
-if 'configure' in COMMAND_LINE_TARGETS:
-	env.Exit(0)
-
-"""
-Overview of the module system :
-
-Each module (kde.py, generic.py, sound.py..) tries to load a stored 
-configuration when run. If the stored configuration does not exist
-or if 'configure' is given on the command line (scons configure), 
-the module launches the verifications and detectioins and stores 
-the results. Modules also call exit when the detection fail.
-
-For example, kde.py stores its config into kde.cache.py
-
-This has several advantages for both developers and users :
-  - Users do not have to run ./configure to compile
-  - The build is insensitive to environment changes
-  - The cache maintains the objects so the config can be changed often
-  - Each module adds its own help via env.Help("message")
-"""
-
-## Use the variables available in the environment - unsafe, but moc, meinproc need it :-/
-import os
-env.AppendUnique( ENV = os.environ )
-
-## The target make dist requires the python module shutil which is in 2.3
-env.EnsurePythonVersion(2, 3)
-
-## Bksys requires scons 0.96
-env.EnsureSConsVersion(0, 96)
-
-"""
-Explanation of the 'env = Environment...' line :
-* the command line arguments and targets are stored in env['TARGS'] and env['ARGS'] for use by the tools
-* the part 'tools=['default', 'generic ..' detect and load the necessary functions for doing the things
-* the part "toolpath=['./']" tells that the tools can be found in the current directory (generic.py, kde.py ..)
-"""
-
-"""
-To load more configuration modules one should only have to add the appropriate tool
-ie: to detect alsa and add the proper cflags, ldflags .. 
-    a file alsa.py file will be needed, and one should then use :
-    env = Environment(TARGS=COMMAND_LINE_TARGETS, ARGS=ARGUMENTS, tools=['default', 'generic', 'kde', 'alsa'], toolpath=['./'])
-
-You can also load environments that are targetted to different platforms
-ie: if os.sys.platform = "darwin":
-	env = Environment(...
-    elsif os.sys.platform = "linux":
-	env = Environment(...
-
-"""
-
-## Setup the cache directory - this avoids recompiling the same files over and over again
-## this is very handy when working with cvs
-env.CacheDir('cache')
-
-## Avoid spreading .sconsign files everywhere - keep this line
-env.SConsignFile('scons_signatures')
-
-## If you need more libs and they rely on pkg-config
-## ie: add support for GTK (source: the scons wiki on www.scons.org)
-# env.ParseConfig('pkg-config --cflags --libs gtk+-2.0')
-
-"""
-This tell scons that there are no rcs or sccs files - this trick 
-can speed up things a bit when having lots of #include
-in the source code and for network file systems
-"""
-env.SourceCode(".", None)
-
-dirs = [ '.', 'src', 'po', 'doc']
-
-for dir in dirs:
-	env.SourceCode(dir, None)
-
-## If we had only one program (named kvigor) to build, 
-## we could add before exporting the env (some kde 
-## helpers in kde.py need it) :
-# env['APPNAME'] = 'kvigor'
-
-## Use this define if you are using the kde translation scheme (.po files)
-env.Append( CPPFLAGS = ['-DTQT_NO_TRANSLATION'] )
-
-## Add this define if you want to use qthreads
-#env.Append( CPPFLAGS = ['-DTQT_THREAD_SUPPORT', '-D_REENTRANT'] )
-
-## To use kdDebug(intvalue)<<"some trace"<<endl; you need to define -DDEBUG - it is done
-## in generic.py automatically when you do scons configure debug=1
-
-## There are also many other defines :
-### -D_XOPEN_SOURCE=500 -D_DEFAULT_SOURCE -DTQT_NO_ASCII_CAST -DTQT_NO_STL -DTQT_NO_COMPAT -DTQT_NO_TRANSLATION
-# where are they documented ? if you know, mail tnagyemail-mail@yahoo@fr please
-
-## Important : export the environment so that SConscript files can the 
-## configuration and builders in it
-Export("env")
-
-
-####################################################
-## Process the SConscript files to build the targets
-## the sconscript files are comparable to Makefile.am_s
-## except that no makefile is generated here :)
-
-env.SConscript("src/SConscript")
-env.SConscript("doc/SConscript")
-env.SConscript("po/SConscript")
-
-####################################################
-## Quick helper to distribute the program
-
-"""
-'scons dist' creates a tarball named bksys-version.tar.bz2 
-containing the source code - this is handy
-do not forget to remove the object files by scons -c
-"""
-
-### To make a tarball of your sctest
-if 'dist' in COMMAND_LINE_TARGETS:
-
-        APPNAME = 'sctest'
-        VERSION = os.popen("cat VERSION").read().rstrip()
-        FOLDER  = APPNAME+'-'+VERSION
-        ARCHIVE = FOLDER+'.tar.bz2'
-
-        GREEN  ="\033[92m"
-        NORMAL ="\033[0m"
-
-        import shutil
-        import glob
-
-        ## check if the temporary directory already exists
-        if os.path.isdir(FOLDER):
-                shutil.rmtree(FOLDER)
-
-        ## create a temporary directory
-        startdir = os.getcwd()
-        shutil.copytree(startdir, FOLDER)
-
-        ## remove the unnecessary files
-        os.popen("find "+FOLDER+" -name \"{arch}\" | xargs rm -rf")
-        os.popen("find "+FOLDER+" -name \".arch-ids\" | xargs rm -rf")
-        os.popen("find "+FOLDER+" -name \".arch-inventory\" | xargs rm -f")
-        os.popen("find "+FOLDER+" -name \"sconsign*\" | xargs rm -f")
-        os.popen("find "+FOLDER+" -name \"*cache*\" | xargs rm -rf")
-        os.popen("find "+FOLDER+" -name \"kdiss*-data\" | xargs rm -rf")
-        os.popen("find "+FOLDER+" -name \"*.pyc\" | xargs rm -f")
-        os.popen("rm -f "+FOLDER+"/config.py*")
-
-        ## make the tarball
-        print(GREEN+"Writing archive "+ARCHIVE+NORMAL)
-        os.popen("tar cjf "+ARCHIVE+" "+FOLDER)
-
-        ## remove the temporary directory
-        if os.path.isdir(FOLDER):
-                shutil.rmtree(FOLDER)
-
-        env.Default(None)
-        env.Exit(0)
-
diff --git a/admin/generic.py b/admin/generic.py
deleted file mode 100644
index 1897bf0..0000000
--- a/admin/generic.py
+++ /dev/null
@@ -1,161 +0,0 @@
-## Thomas Nagy, 2005
-
-"""
-Detect and store the most common options
-* kdecxxflags  : debug=1 (-g) or debug=full (-g3, slower)
-  else use the user CXXFLAGS if any, - or -O2 by default
-* prefix : the installation path
-* extraincludes : a list of paths separated by ':'
-ie: scons configure debug=full prefix=/usr/local extraincludes=/tmp/include:/usr/local
-"""
-
-BOLD   ="\033[1m"
-RED    ="\033[91m"
-GREEN  ="\033[92m"
-YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
-CYAN   ="\033[96m"
-NORMAL ="\033[0m"
-
-import os
-
-def exists(env):
-	return true
-
-def generate(env):
-	env.Help("""
-"""+BOLD+
-"""*** Generic options ***
------------------------"""+NORMAL+"""
-"""+BOLD+"""* debug  """+NORMAL+""": debug=1 (-g) or debug=full (-g3, slower) else use environment CXXFLAGS, or -O2 by default
-"""+BOLD+"""* prefix """+NORMAL+""": the installation path
-"""+BOLD+"""* extraincludes """+NORMAL+""": a list of paths separated by ':'
-ie: """+BOLD+"""scons configure debug=full prefix=/usr/local extraincludes=/tmp/include:/usr/local
-"""+NORMAL)
-
-	## Bksys requires scons 0.96
-	env.EnsureSConsVersion(0, 96)
-	
-	## Global cache directory
-	## Put all project files in it so a rm -rf cache will clean up the config
-	if not 'CACHEDIR' in env:
-		env['CACHEDIR'] = os.getcwd()+'/cache/'
-	if not os.path.isdir(env['CACHEDIR']):
-		os.mkdir(env['CACHEDIR'])
-	
-	## SCons cache directory
-	## this avoids recompiling the same files over and over again: very handy when working with cvs
-	env.CacheDir(os.getcwd()+'/cache/objects')
-
-	## Avoid spreading .sconsign files everywhere - keep this line
-	env.SConsignFile(env['CACHEDIR']+'/scons_signatures')
-	
-	# Special trick for installing rpms ...
-	env['DESTDIR']=''
-	if 'install' in env['TARGS'] and 'DESTDIR' in os.environ:
-		env['DESTDIR']=os.environ['DESTDIR']+'/'
-		print(CYAN+'** Enabling DESTDIR for the project ** ' + NORMAL + env['DESTDIR'])
-
-	# load the options
-	from SCons.Variables import Variables
-	cachefile=env['CACHEDIR']+'generic.cache.py'
-	opts = Variables(cachefile)
-	opts.AddVariables(
-		( 'KDECCFLAGS', 'C flags' ),
-		( 'KDECXXFLAGS', 'debug level for the project : full or just anything' ),
-		( 'KDELINKFLAGS', 'additional link flags' ),
-		( 'PREFIX', 'prefix for installation' ),
-		( 'EXTRAINCLUDES', 'extra include paths for the project' ),
-		( 'ISCONFIGURED', 'is the project configured' ),
-	)
-	opts.Update(env)
-	
-	# use this to avoid an error message 'how to make target configure ?'
-	env.Alias('configure', None)
-
-	import SCons.Util
-
-	# configure the environment if needed
-	if 'configure' in env['TARGS'] or not 'ISCONFIGURED' in env:
-		# be paranoid, unset existing variables
-		if 'KDECXXFLAGS' in env:
-			env.__delitem__('KDECXXFLAGS')
-		if 'KDECCFLAGS' in env:
-			env.__delitem__('KDECCFLAGS')
-		if 'KDELINKFLAGS' in env:
-			env.__delitem__('KDELINKFLAGS')
-		if 'PREFIX' in env:
-			env.__delitem__('PREFIX')
-		if 'EXTRAINCLUDES' in env:
-			env.__delitem__('EXTRAINCLUDES')
-		if 'ISCONFIGURED' in env:
-			env.__delitem__('ISCONFIGURED')
-
-		if env['ARGS'].get('debug', None):
-			debuglevel = env['ARGS'].get('debug', None)
-			print(CYAN+'** Enabling debug for the project **' + NORMAL)
-			if (debuglevel == "full"):
-				env['KDECXXFLAGS'] = ['-DDEBUG', '-g3']
-			else:
-				env['KDECXXFLAGS'] = ['-DDEBUG', '-g']
-		else:
-			if 'CXXFLAGS' in os.environ:
-				# user-defined flags (gentooers will be elighted)
-				env['KDECXXFLAGS'] = SCons.Util.CLVar( os.environ['CXXFLAGS'] )
-				env.Append( KDECXXFLAGS = ['-DNDEBUG', '-DNO_DEBUG'] )
-			else:
-				env.Append(KDECXXFLAGS = ['-O2', '-DNDEBUG', '-DNO_DEBUG'])
-
-		if 'CFLAGS' in os.environ:
-			env['KDECCFLAGS'] = SCons.Util.CLVar( os.environ['CFLAGS'] )
-
-		## FreeBSD settings (contributed by will at freebsd dot org)
-		if os.uname()[0] == "FreeBSD":
-		        if 'PTHREAD_LIBS' in os.environ:
-		                env.AppendUnique( KDELINKFLAGS = SCons.Util.CLVar( os.environ['PTHREAD_LIBS'] ) )
-		        else:
-		                syspf = os.popen('/sbin/sysctl kern.osreldate')
-		                osreldate = int(syspf.read().split()[1])
-		                syspf.close()
-		                if osreldate < 500016:
-		                        env.AppendUnique( KDELINKFLAGS = ['-pthread'])
-		                        env.AppendUnique( KDECXXFLAGS = ['-D_THREAD_SAFE'])
-		                elif osreldate < 502102:
-		                        env.AppendUnique( KDELINKFLAGS = ['-lc_r'])
-		                        env.AppendUnique( KDECXXFLAGS = ['-D_THREAD_SAFE'])
-		                else:
-		                        env.AppendUnique( KDELINKFLAGS = ['-pthread'])
-
-		# User-specified prefix
-		if env['ARGS'].get('prefix', None):
-			env['PREFIX'] = env['ARGS'].get('prefix', None)
-			print(CYAN+'** set the installation prefix for the project : ' + env['PREFIX'] +' **'+ NORMAL)
-		elif 'PREFIX' in env:
-			env.__delitem__('PREFIX')
-
-		# User-specified include paths
-		env['EXTRAINCLUDES'] = env['ARGS'].get('extraincludes', None)
-		if env['ARGS'].get('extraincludes', None):
-			print(CYAN+'** set extra include paths for the project : ' + env['EXTRAINCLUDES'] +' **'+ NORMAL)
-		elif 'EXTRAINCLUDES' in env:
-			env.__delitem__('EXTRAINCLUDES')
-
-		env['ISCONFIGURED']=1
-
-		# And finally save the options in the cache
-		opts.Save(cachefile, env)
-
-	if 'KDECXXFLAGS' in env:
-                env.AppendUnique( CPPFLAGS = env['KDECXXFLAGS'] )
-
-	if 'KDECCFLAGS' in env:
-		env.AppendUnique( CCFLAGS = env['KDECCFLAGS'] )
-
-	if 'KDELINKFLAGS' in env:
-		env.AppendUnique( LINKFLAGS = env['KDELINKFLAGS'] )
-
-	if 'EXTRAINCLUDES' in env:
-		incpaths = []
-		for dir in str(env['EXTRAINCLUDES']).split(':'):
-			incpaths.append( dir )
-		env.Append(CPPPATH = incpaths)
-
diff --git a/admin/kde.py b/admin/kde.py
deleted file mode 100644
index c1d2edf..0000000
--- a/admin/kde.py
+++ /dev/null
@@ -1,736 +0,0 @@
-#! /usr/bin/env python
-# more or less derived from scons qt.py
-# this version makes less scans over the data and is thus faster
-# it is less accurate however (when mocable classes become unmocable)
-# Thomas Nagy, 2004, 2005 <tnagy2^[email protected]>
-
-from time import *
-import SCons.Util
-import string
-
-import os, re
-
-BOLD   ="\033[1m"
-RED    ="\033[91m"
-GREEN  ="\033[92m"
-YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
-CYAN   ="\033[96m"
-NORMAL ="\033[0m"
-
-# Returns the name of the shared object (i.e. libtdeui.so.4)
-# referenced by a libtool archive (like libtdeui.la)
-def getSOfromLA(lafile):
-        contents = open(lafile, 'r').read()
-        match = re.search("^dlname='([^']*)'$", contents, re.M)
-        if match:
-                return match.group(1)
-        return None
-
-def exists(env):
-	return True
-
-def detect_kde(env):
-	""" Detect the qt and kde environment using tde-config mostly """
-
-	prefix     = env['ARGS'].get('prefix', None)
-	execprefix = env['ARGS'].get('execprefix', None)
-	datadir    = env['ARGS'].get('datadir', None)
-	libdir     = env['ARGS'].get('libdir', None)
-	kdeincludes= env['ARGS'].get('kdeincludes', None)
-	tdelibs    = env['ARGS'].get('tdelibs', None)
-	qtincludes = env['ARGS'].get('qtincludes', None)
-	tqtincludes= env['ARGS'].get('tqtincludes', None)
-	qtlibs     = env['ARGS'].get('qtlibs', None)
-	tdedir     = env['ARGS'].get('tdedir', None)
-
-	## Detect the tde libraries
-	print("Checking for tde-config           : ")
-	str="which tde-config 2>/dev/null"
-	if tdedir: str="which %s 2>/dev/null" % (tdedir+'/bin/tde-config')
-	kde_config = os.popen(str).read().strip()
-	if len(kde_config):
-		print(GREEN + 'tde-config was found as ' + kde_config + NORMAL)
-	else:
-		if tdedir: print(RED + 'tde-config was NOT found in the folder given ' + tdedir + NORMAL)
-		else: print(RED + 'tde-config was NOT found in your PATH' + NORMAL)
-		print("Make sure kde is installed properly")
-		print("(missing package tdebase-devel?)")
-		env.Exit(1)
-	if tdedir: env['TDEDIR']=tdedir
-	else: env['TDEDIR'] = os.popen(kde_config+' -prefix').read().strip()
-
-	print("Checking for tde version          : ")
-	tde_version = os.popen(kde_config+" --version|grep TDE").read().strip().split()[1]
-	tde_major = tde_version.split('.')[0].lstrip('R')
-	tde_minor = tde_version.split('.')[1]
-	tde_patch = tde_version.split('.')[2]
-	try:
-		env['KDEm1']=int(tde_major)
-	except:
-		pass
-	try:
-		env['KDEm2']=int(tde_minor)
-	except:
-		pass
-	try:
-		env['KDEm3']=int(tde_patch)
-	except:
-		pass
-	if int(tde_major) != 14:
-		print(RED + tde_version)
-		print(RED + "Your tde version might be too old" + NORMAL)
-		print(RED + "Please make sure TDE is at least R14.0" + NORMAL)
-	else:
-		print(GREEN + tde_version + NORMAL)
-
-	## Detect the qt library
-	print("Checking for the qt library       : ")
-	qtdir = os.getenv("QTDIR")
-	if qtdir:
-		print(GREEN + "qt is in " + qtdir + NORMAL)
-	else:
-		libdir = os.popen(kde_config + ' --expandvars --install lib').read().strip()
-		libtdeuiSO = libdir+'/'+getSOfromLA(libdir+'/libtdeui.la')
-		try:
-			m = re.search('(.*)/lib/libqt.*', os.popen('ldd '+libtdeuiSO+' | grep libqt').read().strip().split()[2])
-		except:
-			m = re.search('(.*)/lib/libtqt.*', os.popen('ldd ' + libtdeuiSO + ' | grep libtqt').read().strip().split()[2])
-			pass
-		if m:
-			qtdir = m.group(1)
-			print(YELLOW+"qt was found as " + m.group(1) + NORMAL)
-		else:
-			print(RED+"qt was not found"+NORMAL)
-			print(RED+"Please set QTDIR first (/usr/lib/qt3?)"+NORMAL)
-			env.Exit(1)
-	env['QTDIR'] = qtdir.strip()
-
-	## Find the necessary programs uic-tqt and moc
-	print("Checking for uic-tqt              : ")
-	uic = qtdir + "/bin/uic-tqt"
-	if os.path.isfile(uic):
-		print(GREEN+"uic-tqt was found as "+uic+NORMAL)
-	else:
-		uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
-		if len(uic):
-			print(YELLOW+"uic-tqt was found as "+uic+NORMAL)
-		else:
-			uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
-			if len(uic):
-				print(YELLOW+"uic-tqt was found as "+uic+NORMAL)
-			else:
-				print(RED+"uic-tqt was not found - set QTDIR put it in your PATH ?"+NORMAL)
-				env.Exit(1)
-	env['QT_UIC'] = uic
-
-	print("Checking for moc                  : ")
-	moc = qtdir + "/bin/tmoc"
-	if os.path.isfile(moc):
-		print(GREEN+"moc was found as "+moc+NORMAL)
-	else:
-		moc = os.popen("which tmoc 2>/dev/null").read().strip()
-		if len(moc):
-			print(YELLOW+"moc was found as "+moc+NORMAL)
-		elif os.path.isfile("/usr/share/tqt3/bin/tmoc"):
-			moc = "/usr/share/tqt3/bin/tmoc"
-			print(YELLOW+"moc was found as "+moc+NORMAL)
-		elif os.path.isfile("/usr/share/qt3/bin/tmoc"):
-			moc = "/usr/share/qt3/bin/tmoc"
-			print(YELLOW+"moc was found as "+moc+NORMAL)
-		else:
-			print(RED+"moc was not found - set QTDIR or put it in your PATH ?"+NORMAL)
-			env.Exit(1)
-	env['QT_MOC'] = moc
-
-	## check for the tqt includes
-	print("Checking for the tqt includes     : ")
-	if tqtincludes and os.path.isfile(tqtincludes + "/tqlayout.h"):
-		# The user told where to look for and it looks valid
-		print(GREEN + "ok " + tqtincludes + NORMAL)
-	else:
-		if os.path.isfile(qtdir + "/include/qlayout.h"):
-			# Automatic detection
-			print(GREEN + "ok " + qtdir + "/include/ " + NORMAL)
-			tqtincludes = qtdir + "/include/"
-		elif os.path.isfile("/usr/include/tqt/tqlayout.h"):
-			# Debian probably
-			print(YELLOW + "the qt headers were found in /usr/include/tqt/ " + NORMAL)
-			tqtincludes = "/usr/include/tqt"
-		elif os.path.isfile("/usr/include/qt4/Qt/qglobal.h"):
-			# Debian probably
-			print(YELLOW + "the qt headers were found in /usr/include/qt4/ " + NORMAL)
-			tqtincludes = "/usr/include/qt4"
-		else:
-			print(RED + "the qt headers were not found" + NORMAL)
-			env.Exit(1)
-			
-	## check for the qt includes
-	print("Checking for the qt includes      : ")
-	if qtincludes and os.path.isfile(qtincludes + "/ntqglobal.h"):
-		# The user told where to look for and it looks valid
-		print(GREEN + "ok " + qtincludes + NORMAL)
-	else:
-		if os.path.isfile(qtdir + "/include/ntqglobal.h"):
-			# Automatic detection
-			print(GREEN + "ok " + qtdir + "/include/ " + NORMAL)
-			qtincludes = qtdir + "/include/"
-		elif os.path.isfile("/usr/include/tqt3/ntqglobal.h"):
-			# Debian probably
-			print(YELLOW + "the qt headers were found in /usr/include/tqt3/ " + NORMAL)
-			qtincludes = "/usr/include/tqt3"
-		else:
-			print(RED + "the qt headers were not found" + NORMAL)
-			env.Exit(1)
-
-	print("Checking for the tde includes     : ")
-	kdeprefix = os.popen(kde_config + " --prefix").read().strip()
-	if not kdeincludes:
-		kdeincludes = kdeprefix+"/include/"
-	if os.path.isfile(kdeincludes + "/klineedit.h"):
-		print(GREEN+"ok "+kdeincludes+NORMAL)
-	else:
-		if os.path.isfile(kdeprefix+"/include/tde/klineedit.h"):
-			# Debian, Fedora probably
-			print(YELLOW+"the kde headers were found in "+kdeprefix+"/include/tde/"+NORMAL)
-			kdeincludes = kdeprefix + "/include/tde/"
-		else:
-			print(RED+"The kde includes were NOT found"+NORMAL)
-			env.Exit(1)
-
-	if prefix:
-		## use the user-specified prefix
-		if not execprefix:
-			execprefix = prefix
-		if not datadir:
-			datadir = prefix+"/share"
-		if not libdir:
-			libdir = execprefix+"/lib"
-
-		subst_vars = lambda x: x.replace('${exec_prefix}',execprefix).replace('${datadir}',datadir).replace('${libdir}',libdir)
-		env['KDEBIN']   = subst_vars(os.popen(kde_config + ' --install exe').read().strip())
-		env['KDEAPPS']  = subst_vars(os.popen(kde_config + ' --install apps').read().strip())		
-		env['KDEDATA']  = subst_vars(os.popen(kde_config + ' --install data').read().strip())
-		env['KDEMODULE']= subst_vars(os.popen(kde_config + ' --install module').read().strip())
-		env['KDELOCALE']= subst_vars(os.popen(kde_config + ' --install locale').read().strip())
-		env['KDEDOC']   = subst_vars(os.popen(kde_config + ' --install html').read().strip())
-		env['KDEKCFG']  = subst_vars(os.popen(kde_config + ' --install kcfg').read().strip())
-		env['KDEXDG']   = subst_vars(os.popen(kde_config + ' --install xdgdata-apps').read().strip())
-		env['KDEMENU']  = subst_vars(os.popen(kde_config + ' --install apps').read().strip())
-		env['KDEMIME']  = subst_vars(os.popen(kde_config + ' --install mime').read().strip())
-		env['KDEICONS'] = subst_vars(os.popen(kde_config + ' --install icon').read().strip())
-		env['KDESERV']  = subst_vars(os.popen(kde_config + ' --install services').read().strip())
-	else:
-		# the user has given no prefix, install as a normal kde app
-		env['PREFIX'] = os.popen(kde_config + ' --prefix').read().strip()
-		env['KDEBIN']   = os.popen(kde_config + ' --expandvars --install exe').read().strip()
-		env['KDEAPPS']  = os.popen(kde_config + ' --expandvars --install apps').read().strip()
-		env['KDEDATA']  = os.popen(kde_config + ' --expandvars --install data').read().strip()
-		env['KDEMODULE']= os.popen(kde_config + ' --expandvars --install module').read().strip()
-		env['KDELOCALE']= os.popen(kde_config + ' --expandvars --install locale').read().strip()
-		env['KDEDOC']   = os.popen(kde_config + ' --expandvars --install html').read().strip()
-		env['KDEKCFG']  = os.popen(kde_config + ' --expandvars --install kcfg').read().strip()
-		env['KDEXDG']   = os.popen(kde_config + ' --expandvars --install xdgdata-apps').read().strip()
-		env['KDEMENU']  = os.popen(kde_config + ' --expandvars --install apps').read().strip()
-		env['KDEMIME']  = os.popen(kde_config + ' --expandvars --install mime').read().strip()
-		env['KDEICONS'] = os.popen(kde_config + ' --expandvars --install icon').read().strip()
-		env['KDESERV']  = os.popen(kde_config + ' --expandvars --install services').read().strip()
-
-	env['QTPLUGINS']=os.popen(kde_config + ' --expandvars --install qtplugins').read().strip()
-
-	## kde libs and includes
-	env['KDEINCLUDEPATH']= kdeincludes
-	if not tdelibs:
-		tdelibs = os.popen(kde_config + ' --expandvars --install lib').read().strip()
-	env['KDELIBPATH']= tdelibs
-
-	## qt libs and includes
-	env['QTINCLUDEPATH']= qtincludes
-	env['TQTINCLUDEPATH']= tqtincludes
-	if not qtlibs:
-		qtlibs = qtdir+"/lib"
-	env['QTLIBPATH']= qtlibs
-
-def mocscan(target, source, env):
-	splitext = SCons.Util.splitext
-
-	q_object_search = re.compile(r'[^A-Za-z0-9]Q_OBJECT[^A-Za-z0-9]')
-
-	for obj in source:
-
-		if not obj.has_builder():
-			# binary obj file provided
-			continue
-
-		cpp = obj.sources[0]
-		if not splitext(str(cpp))[1] == '.cpp':
-			# not a cplusplus source
-			continue
-
-		# if we have a .ui file, it is automatically handled by Uic
-		uiname = string.split(cpp.abspath, '.cpp')[0] + ".ui"
-		if os.path.isfile(uiname):
-			continue
-
-		hname = splitext(cpp.name)[0] + ".h"
-		h = SCons.Node.FS.find_file(hname, (cpp.get_dir(),) )
-
-		if h:
-			# h file with the Q_OBJECT macro found -> add .moc file
-			mocfile = string.split(cpp.abspath, '.cpp')[0] + ".moc"
-			# trick : check if the moc file already exists (avoid a scan)
-			if os.path.isfile(mocfile):
-				env.Moc(h)
-			elif q_object_search.search(h.get_contents()):
-				# FIXME : strong assumption
-				env.Moc(h)
-
-	return (target, source)
-
-def generate(env):
-
-	import SCons.Defaults
-	import SCons.Tool
-	env.Help("""
-"""+BOLD+
-"""*** KDE options ***
--------------------"""+NORMAL+"""
-"""+BOLD+"""* prefix     """+NORMAL+""": base install path,         ie: /usr/local
-"""+BOLD+"""* execprefix """+NORMAL+""": install path for binaries, ie: /usr/bin
-"""+BOLD+"""* datadir    """+NORMAL+""": install path for the data, ie: /usr/local/share
-"""+BOLD+"""* libdir     """+NORMAL+""": install path for the libs, ie: /usr/lib
-"""+BOLD+"""* tdedir     """+NORMAL+""": path to TDE directory,     ie: /opt/trinity
-"""+BOLD+"""* kdeincludes"""+NORMAL+""": path to the kde includes (/usr/include/tde on debian, ...)
-"""+BOLD+"""* qtincludes """+NORMAL+""": same punishment, for qt includes (/usr/include/qt on debian, ...)
-"""+BOLD+"""* tdelibs    """+NORMAL+""": path to the kde libs, for linking the programs
-"""+BOLD+"""* qtlibs     """+NORMAL+""": same punishment, for qt libraries
-ie: """+BOLD+"""scons configure libdir=/usr/local/lib qtincludes=/usr/include/qt
-"""+NORMAL)
-	
-	CLVar = SCons.Util.CLVar
-	splitext = SCons.Util.splitext
-	Builder = SCons.Builder.Builder
-	
-	# Detect the environment - replaces ./configure implicitely
-	# and store the options into a cache
-	from SCons.Variables import Variables
-	cachefile=env['CACHEDIR']+'/kde.cache.py'
-	opts = Variables(cachefile)
-	opts.AddVariables(
-		( 'QTDIR', 'root of qt directory' ),
-		( 'QTLIBPATH', 'path to the qt libraries' ),
-		( 'QTINCLUDEPATH', 'path to the qt includes' ),
-		( 'TQTINCLUDEPATH', 'path to the tqt includes' ),
-		( 'QT_UIC', 'moc directory'),
-		( 'QT_MOC', 'moc executable command'),
-		( 'QTPLUGINS', 'uic executable command'),
-		( 'TDEDIR', 'root of kde directory' ),
-		( 'KDELIBPATH', 'path to the kde libs' ),
-		( 'KDEINCLUDEPATH', 'path to the kde includes' ),
-
-		( 'PREFIX', 'root of the program installation'),
-
-		( 'KDEBIN', 'installation path of the kde binaries'),
-		( 'KDEMODULE', 'installation path of the parts and libs'),
-		( 'KDEAPPS', ''),
-		( 'KDEDATA', 'installation path of the application data'),
-		( 'KDELOCALE', ''),
-		( 'KDEDOC', 'installation path of the application documentation'),
-		( 'KDEKCFG', 'installation path of the .kcfg files'),
-		( 'KDEXDG', 'installation path of the service types'),
-		( 'KDEMENU', ''),
-		( 'KDEMIME', 'installation path of to the mimetypes'),
-		( 'KDEICONS', ''),
-		( 'KDESERV', ''),
-	)
-	opts.Update(env)
-
-	# reconfigure when things are missing
-	if 'configure' in env['TARGS'] or not env.has_key('QTDIR') or not env.has_key('TDEDIR'):
-		detect_kde(env)
-
-	# finally save the configuration
-	opts.Save(cachefile, env)
-
-	## set default variables, one can override them in sconscript files
-	env.Append(CXXFLAGS = ['-I'+env['KDEINCLUDEPATH'], '-I'+env['QTINCLUDEPATH'], '-I'+env['TQTINCLUDEPATH'], '-include', 'tqt.h' ])
-	env.Append(LIBPATH = [env['KDELIBPATH'], env['QTLIBPATH'] ])
-	
-	env['STATIC_AND_SHARED_OBJECTS_ARE_THE_SAME'] = 1
-	
-	env['QT_AUTOSCAN']     = 1
-	env['QT_DEBUG']        = 0
-	
-	env['QT_UIC_HFLAGS']   = '-L $QTPLUGINS -nounload'
-	env['QT_UIC_CFLAGS']   = '$QT_UIC_HFLAGS -tr tr2i18n'
-	env['QT_LIBS']         = 'tqt'
-	
-	env['LIBTOOL_FLAGS']   = '--silent --mode=compile --tag=CXX'
-	
-	env['QT_UICIMPLPREFIX'] = ''
-	env['QT_UICIMPLSUFFIX'] = '.cpp'
-	env['QT_MOCHPREFIX']    = ''
-	env['QT_MOCHSUFFIX']    = '.moc'
-	env['KDE_KCFG_IMPLPREFIX'] = ''
-	env['KDE_KCFG_IMPL_HSUFFIX'] = '.h'
-	env['KDE_KCFG_IMPL_CSUFFIX'] = '.cpp'
-	env['KDE_SKEL_IMPL_SUFFIX']  = '.skel'
-	env['MEINPROC']              = 'meinproc'
-	env['MSGFMT']                = 'msgfmt'
-
-
-	###### ui file processing
-	def uicGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('$QT_UIC $QT_UIC_HFLAGS -o '+target[0].path+' '+source[0].path)
-		act.append('rm -f '                           +target[1].path)
-		act.append('echo \'#include <tdelocale.h>\' >> '+target[1].path)
-		act.append('echo \'#include <kdialog.h>\' >> '+target[1].path)
-		act.append('$QT_UIC $QT_UIC_CFLAGS -impl '+target[0].path+' -o '+target[1].path+'.tmp '+source[0].path)
-		act.append('cat '+target[1].path+'.tmp >> '+target[1].path)
-		act.append('rm -f '+target[1].path+'.tmp')
-		act.append('echo \'#include "' + target[2].name + '"\' >> '+target[1].path)
-		act.append('moc-tqt $QT_MOC '+target[0].path+' '+target[2].path)
-		return act
-	
-	def uicEmitter(target, source, env):
-		adjustixes = SCons.Util.adjustixes
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		# first target is automatically added by builder (.h file)
-		if len(target) < 2:
-			# second target is .cpp file
-			target.append(adjustixes(bs,
-				env.subst('$QT_UICIMPLPREFIX'),
-				env.subst('$QT_UICIMPLSUFFIX')))
-		if len(target) < 3:
-			# third target is .moc file
-			target.append(adjustixes(bs,
-				env.subst('$QT_MOCHPREFIX'),
-				env.subst('$QT_MOCHSUFFIX')))
-		return target, source
-	
-	UIC_BUILDER = Builder(
-		generator  = uicGenerator,
-		emitter    = uicEmitter,
-		suffix     = '.h',
-		src_suffix = '.ui' )
-	
-	###### moc file processing
-	env['QT_MOCCOM'] = ('moc-tqt $QT_MOC $SOURCE ${TARGETS[0]}')
-	
-	MOC_BUILDER = Builder(
-		action     = '$QT_MOCCOM',
-		suffix     = '.moc',
-		src_suffix = '.h' )
-	
-	MOCCPP_BUILDER = Builder(
-		action     = '$QT_MOCCOM',
-		suffix     = '_moc.cpp',
-		src_suffix = '.h' )
-	
-	###### kcfg file processing
-	def kcfgGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('tdeconfig_compiler -d'+str(source[0].get_dir())+' '+source[1].path+' '+source[0].path)
-		return act
-	
-	def kcfgEmitter(target, source, env):
-		adjustixes = SCons.Util.adjustixes
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		# first target is automatically added by builder (.h file)
-		if len(target) < 2:
-			# second target is .cpp file
-			target.append(adjustixes(bs, env.subst('$KDE_KCFG_IMPLPREFIX'), env.subst('$KDE_KCFG_IMPL_CSUFFIX')))
-	
-		if len(source) <2:
-			kcfgfilename = os.popen("cat "+str(source[0])+"|grep File|sed 's/File.*=//i'").read().rstrip()
-			source.append( str(source[0].get_dir())+'/'+kcfgfilename )
-		return target, source
-
-	KCFG_BUILDER = Builder(
-		generator  = kcfgGenerator,
-		emitter    = kcfgEmitter,
-		suffix     = '.h',
-		src_suffix = '.kcfgc' )
-	
-	###### dcop processing
-	def dcopGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('dcopidl '+source[0].path+' > '+target[1].path+'|| ( rm -f '+target[1].path+' ; false )')
-		act.append('dcopidl2cpp --c++-suffix cpp --no-signals --no-stub '+target[1].path)
-		return act
-
-	def dcopEmitter(target, source, env):
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		target.append(bs+'.kidl')
-		#target.append(bs+'_skel.cpp')
-		return target, source
-
-	DCOP_BUILDER = Builder(
-		generator  = dcopGenerator,
-		emitter    = dcopEmitter,
-		suffix     = '_skel.cpp',
-		src_suffix = '.h' )
-
-	###### documentation (meinproc) processing
-	MEINPROC_BUILDER = Builder(
-		action     = '$MEINPROC --check --cache $TARGET $SOURCE',
-		suffix     = '.cache.bz2',
-		src_suffix = '.docbook' )
-
-	###### translation files builder
-	TRANSFILES_BUILDER = Builder(
-		action     = '$MSGFMT $SOURCE -o $TARGET',
-		suffix     = '.gmo',
-		src_suffix = '.po' )
-
-	###### libtool file builder
-	def laGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('echo "dlname=\''+source[0].name+'\'" > '+target[0].path)
-		act.append('echo "library_names=\''+source[0].name+' '+source[0].name+' '+source[0].name+'\'" >> '+target[0].path)
-		act.append('echo "old_library=\'\'">> '+target[0].path)
-		act.append('echo "dependency_libs=\'\'">> '+target[0].path)
-		act.append('echo "current=0">> '+target[0].path)
-		act.append('echo "age=0">> '+target[0].path)
-		act.append('echo "revision=0">> '+target[0].path)
-		act.append('echo "installed=yes">> '+target[0].path)
-		act.append('echo "shouldnotlink=no">> '+target[0].path)
-		act.append('echo "dlopen=\'\'">> '+target[0].path)
-		act.append('echo "dlpreopen=\'\'">> '+target[0].path)
-		act.append('echo "libdir=\''+env['KDEMODULE']+'\'" >> '+target[0].path)
-		return act
-	
-	LA_BUILDER = Builder(
-		generator  = laGenerator,
-		suffix     = '.la',
-		src_suffix = '.so' )
-	
-	##### register the builders
-	env['BUILDERS']['Uic']        = UIC_BUILDER
-	env['BUILDERS']['Moc']        = MOC_BUILDER
-	env['BUILDERS']['Moccpp']     = MOCCPP_BUILDER
-	env['BUILDERS']['Dcop']       = DCOP_BUILDER
-	env['BUILDERS']['Kcfg']       = KCFG_BUILDER
-	env['BUILDERS']['LaFile']     = LA_BUILDER
-	env['BUILDERS']['Meinproc']   = MEINPROC_BUILDER
-	env['BUILDERS']['Transfiles'] = TRANSFILES_BUILDER
-
-	static_obj, shared_obj = SCons.Tool.createObjBuilders(env)
-	static_obj.src_builder.append('Uic')
-	shared_obj.src_builder.append('Uic')
-	static_obj.src_builder.append('Kcfg')
-	shared_obj.src_builder.append('Kcfg')
-	static_obj.src_builder.append('LaFile')
-	shared_obj.src_builder.append('LaFile')
-	static_obj.src_builder.append('Meinproc')
-	shared_obj.src_builder.append('Meinproc')
-	static_obj.src_builder.append('Transfiles')
-	shared_obj.src_builder.append('Transfiles')
-
-	## find the files to moc, dcop, and link against kde and qt
-	env.AppendUnique(PROGEMITTER=[mocscan], SHLIBEMITTER=[mocscan], LIBEMITTER =[mocscan])
-
-	###########################################
-	## Handy helpers for building kde programs
-	## You should not have to modify them ..
-
-	#import SCons.Util
-	skel_ext = [".skel", ".SKEL"]
-	def KDEfiles(lenv, target, source):
-		""" Returns a list of files for scons (handles kde tricks like .skel)
-		It also makes custom checks against double includes like : ['file.ui', 'file.cpp']
-		(file.cpp is already included because of file.ui) """
-
-		src=[]
-		ui_files=[]
-		kcfg_files=[]
-		skel_files=[]
-		other_files=[]
-
-		# For each file, check wether it is a dcop file or not, and create the complete list of sources
-		for file in source:
-			bs  = SCons.Util.splitext(file)[0]
-			ext = SCons.Util.splitext(file)[1]
-			if ext in skel_ext:
-				lenv.Dcop(bs+'.h')
-				src.append(bs+'_skel.cpp')
-			elif ext == ".moch":
-				lenv.Moccpp(bs+'.h')
-				src.append(bs+'_moc.cpp')
-			else:
-				src.append(file)
-
-			if ext == '.ui':
-				ui_files.append(bs)
-			elif ext == '.kcfgc':
-				kcfg_files.append(bs)
-			elif ext == '.skel':
-                                skel_files.append(bs)
-			else:
-                                other_files.append(bs)
-		return src
-
-	"""
-	In the future, these functions will contain the code that will dump the
-	configuration for re-use from an IDE
-	"""
-	import glob
-	def KDEinstall(lenv, restype, subdir, files):
-		if not 'install' in env['TARGS']:
-			return
-		basedir=env['DESTDIR']
-		if len(restype)>0:
-			if not lenv.has_key(restype):
-				print(RED+"unknown resource type "+restype+NORMAL)
-			else:
-				basedir += lenv[restype]+'/'
-		#print(file) # <- useful to trace stuff :)
-		install_list =  env.Install(basedir+subdir, files)
-		env.Alias('install', install_list)
-		return install_list
-
-	def KDEinstallas(lenv, restype, destfile, file):
-		if not 'install' in env['TARGS']:
-			return
-		basedir=env['DESTDIR']
-		if len(restype)>0:
-			if not lenv.has_key(restype):
-				print(RED+"unknown resource type "+restype+NORMAL)
-			else:
-				basedir += lenv[restype]+'/'
-		install_list = env.InstallAs(basedir+destfile, file)
-		env.Alias('install', install_list)
-		return install_list
-
-	def KDEprogram(lenv, target, source):
-		""" Makes a kde program
-		The program is installed except if one sets env['NOAUTOINSTALL'] """
-		src = KDEfiles(lenv, target, source)
-		program_list = lenv.Program(target, src)
-		if not lenv.has_key('NOAUTOINSTALL'):
-			KDEinstall(lenv, 'KDEBIN', '', target)
-		return program_list
-
-	def KDEshlib(lenv, target, source, kdelib=0):
-		""" Makes a shared library for kde (.la file for klibloader)
-		The library is installed except if one sets env['NOAUTOINSTALL'] """
-		src = KDEfiles(lenv, target, source)
-		library_list = lenv.SharedLibrary(target, src)
-		lafile_list  = lenv.LaFile(target, library_list)
-		if not lenv.has_key('NOAUTOINSTALL'):
-			install_dir = 'KDEMODULE'
-			if kdelib==1:
-				install_dir = 'KDELIBPATH'
-			KDEinstall(lenv, install_dir, '', library_list)
-			KDEinstall(lenv, install_dir, '', lafile_list)
-		return library_list
-
-	def KDEstaticlib(lenv, target, source):
-		""" Makes a static library for kde - in practice you should not use static libraries
-		1. they take more memory than shared ones
-		2. makefile.am needed it because of limitations
-		(cannot handle sources in separate folders - takes extra processing) """
-		src = KDEfiles(lenv, target, source)
-		return lenv.StaticLibrary(target, src)
-		# do not install static libraries by default
-
-	def KDEaddflags_cxx(lenv, fl):
-		""" Compilation flags for C++ programs """
-		lenv.AppendUnique(CXXFLAGS = fl)
-
-	def KDEaddflags_c(lenv, fl):
-		""" Compilation flags for C programs """
-		lenv.AppendUnique(CFLAGS = fl)
-
-	def KDEaddflags_link(lenv, fl):
-		""" Add link flags - Use this if KDEaddlibs below is not enough """
-		lenv.AppendUnique(LINKFLAGS = fl)
-
-	def KDEaddlibs(lenv, libs):
-		""" Helper function """
-		lenv.AppendUnique(LIBS = libs)
-
-	def KDEaddpaths_includes(lenv, paths):
-		""" Add new include paths """
-		lenv.AppendUnique(CPPPATH = paths)
-
-	def KDEaddpaths_libs(lenv, paths):
-		""" Add paths to libraries """
-		lenv.AppendUnique(LIBPATH = paths)
-
-	def KDElang(lenv, folder, appname):
-		""" Process translations (.po files) in a po/ dir """
-		transfiles = glob.glob(folder+'/*.po')
-		for lang in transfiles:
-			result = lenv.Transfiles(lang)
-			country = SCons.Util.splitext(result[0].name)[0]
-			KDEinstallas(lenv, 'KDELOCALE', country+'/LC_MESSAGES/'+appname+'.mo', result)
-
-	def KDEicon(lenv, icname):
-		""" Emulates the behaviour of Makefile.am to install icons
-		Contributed by: "Andrey Golovizin" <grooz@gorodok@net> """
-		type_dic = { 'action' : 'actions', 'app' : 'apps', 'device' : 
-			'devices', 'filesys' : 'filesystems', 'mime' : 'mimetypes' } 
-		dir_dic = {
-		'los'  :'locolor/16x16',
-		'lom'  :'locolor/32x32',
-		'him'  :'hicolor/32x32',
-		'hil'  :'hicolor/48x48',
-		'lo16' :'locolor/16x16',
-		'lo22' :'locolor/22x22',
-		'lo32' :'locolor/32x32',
-		'hi16' :'hicolor/16x16',
-		'hi22' :'hicolor/22x22',
-		'hi32' :'hicolor/32x32',
-		'hi48' :'hicolor/48x48',
-		'hi64' :'hicolor/64x64',
-		'hi128':'hicolor/128x128',
-		'hisc' :'hicolor/scalable',
-		'cr16' :'crystalsvg/16x16',
-		'cr22' :'crystalsvg/22x22',
-		'cr32' :'crystalsvg/32x32',
-		'cr48' :'crystalsvg/48x48',
-		'cr64' :'crystalsvg/64x64',
-		'cr128':'crystalsvg/128x128',
-		'crsc' :'crystalsvg/scalable'
-		}
-
-		import glob
-		iconfiles = []
-		for ext in ['png', 'xpm', 'mng', 'svg', 'svgz']:
-			files = glob.glob('*-*-%s.%s' % (icname, ext))
-			iconfiles += files
-		for iconfile in iconfiles:
-			tmp = iconfile.split('-')
-			if len(tmp) != 3:
-				print(RED + 'WARNING: icon filename has unknown format: ' + iconfile + NORMAL)
-				continue
-			[icon_dir, icon_type, icon_filename] = tmp
-			try:
-				destfile = '%s/%s/%s/%s' % (lenv['KDEICONS'], dir_dic[icon_dir], type_dic[icon_type], icon_filename)
-			except KeyError:
-				print(RED + 'WARNING: unknown icon type: ' + iconfile + NORMAL)
-				continue
-			## do not use KDEinstallas here, as parsing from an ide will be necessary
-			if 'install' in env['TARGS']:
-				env.Alias('install', env.InstallAs( env['DESTDIR']+'/'+destfile, iconfile ) )
-
-	# Attach the functions to the environment so that sconscripts can use them
-	from SCons.Script.SConscript import SConsEnvironment
-	SConsEnvironment.KDEprogram = KDEprogram
-	SConsEnvironment.KDEshlib = KDEshlib
-	SConsEnvironment.KDEstaticlib = KDEstaticlib
-	SConsEnvironment.KDEinstall = KDEinstall
-	SConsEnvironment.KDEinstallas = KDEinstallas
-	SConsEnvironment.KDElang = KDElang
-	SConsEnvironment.KDEicon = KDEicon
-
-	SConsEnvironment.KDEaddflags_cxx = KDEaddflags_cxx
-	SConsEnvironment.KDEaddflags_c = KDEaddflags_c
-	SConsEnvironment.KDEaddflags_link = KDEaddflags_link
-	SConsEnvironment.KDEaddlibs = KDEaddlibs
-	SConsEnvironment.KDEaddpaths_includes = KDEaddpaths_includes
-	SConsEnvironment.KDEaddpaths_libs = KDEaddpaths_libs
diff --git a/doc/SConscript b/doc/SConscript
deleted file mode 100644
index 9c3bbe5..0000000
--- a/doc/SConscript
+++ /dev/null
@@ -1,83 +0,0 @@
-#! /usr/bin/env python
-## This script demonstrates to build and install
-## the documentation of a kde program with scons
-##
-## Thomas Nagy, 2005
-
-## This file can be reused freely for any project (see COPYING)
-
-## First load the environment set in the top-level SConstruct file
-Import( 'env' )
-myenv=env.Clone()
-
-## The following looks complicated but it is not
-## We first define a function to install all files as documentation
-## The documentation is of course lying in subfolders from here
-## * normal files are installed under KDEDOC/destination
-## * meinproc files are not installed, but processed into a single 
-##   index.cache.bz2 which is installed afterwards
-
-## This is far more maintainable to have *one* file than
-## having lots of almost empty SConscript in several folders
-
-import os
-import sys
-import glob
-import SCons.Util
-
-## Define this to 1 if you are writing documentation else to 0 :)
-i_am_a_documentation_writer = 0
-
-## This function uses env imported above
-def processfolder(folder, lang, destination=""):
-	# folder is the folder to process
-	# lang is the language
-	# destination is the subdirectory in KDEDOC
-	
-	docfiles = glob.glob(folder+"/???*.*") # file files that are at least 4 chars wide :)
-
-	# warn about errors
-	#if len(lang) != 2:
-	#	print "error, lang must be a two-letter string, like 'en'"
-
-	# when the destination is not given, use the folder
-	if len(destination) == 0:
-		destination=folder
-	
-	docbook_list = []
-	for file in docfiles:
-
-		# do not process folders
-		if not os.path.isfile(file):
-			continue
-		# do not process the cache file
-		if file == 'index.cache.bz2':
-			continue
-		# ignore invalid files (TODO??)
-		if len( SCons.Util.splitext( file ) ) <= 1 :
-			continue
-
-		ext = SCons.Util.splitext( file )[1]
-		
-		# docbook files are processed by meinproc
-		if ext == '.docbook':
-			docbook_list.append( file )
-			continue
-
-		myenv.KDEinstall('KDEDOC', lang+'/'+destination, file)
-
-	# Now process the index.docbook files ..
-	if len(docbook_list) == 0:
-		return
-	if not os.path.isfile( folder+'index.docbook' ):
-		print("Error, index.docbook was not found in "+folder+'/index.docbook')
-		return
-	if i_am_a_documentation_writer:
-		for file in docbook_list:
-			myenv.Depends( folder+'index.cache.bz2', file )
-	myenv.Meinproc( folder+'/index.cache.bz2', folder+'/index.docbook' )
-	myenv.KDEinstall( 'KDEDOC', lang+'/'+destination, folder+'/index.cache.bz2' )
-
-## Use processfolder for each documentation directory
-processfolder('en/', 'en', 'kstreamripper')
-
diff --git a/kde.py b/kde.py
deleted file mode 100644
index 02a7644..0000000
--- a/kde.py
+++ /dev/null
@@ -1,857 +0,0 @@
-# Made from scons qt.py and (heavily) modified into kde.py
-# Thomas Nagy, 2004, 2005 <tnagy2^[email protected]>
-
-"""
-Run scons -h to display the associated help, or look below ..
-"""
-
-BOLD   ="\033[1m"
-RED    ="\033[91m"
-GREEN  ="\033[92m"
-YELLOW ="\033[1m" #"\033[93m" # unreadable on white backgrounds
-CYAN   ="\033[96m"
-NORMAL ="\033[0m"
-
-import os, re
-
-# Returns the name of the shared object (i.e. libtdeui.so.4)
-# referenced by a libtool archive (like libtdeui.la)
-def getSOfromLA(lafile):
-	contents = open(lafile, 'r').read()
-	match = re.search("^dlname='([^']*)'$", contents, re.M)
-	if match:
-		return match.group(1)
-	return None
-
-def exists(env):
-	return True
-
-def detect_kde(env):
-	""" Detect the qt and kde environment using tde-config mostly """
-
-	prefix      = env['ARGS'].get('prefix', None)
-	execprefix  = env['ARGS'].get('execprefix', None)
-	datadir     = env['ARGS'].get('datadir', None)
-	libdir      = env['ARGS'].get('libdir', None)
-	libsuffix   = env['ARGS'].get('libsuffix', '')
-	kdeincludes = env['ARGS'].get('kdeincludes', None)
-	tdelibs     = env['ARGS'].get('tdelibs', None)
-	qtincludes  = env['ARGS'].get('qtincludes', None)
-	tqtincludes = env['ARGS'].get('tqtincludes', None)
-	tqtlibs      = env['ARGS'].get('tqtlibs', None)
-	tdedir      = env['ARGS'].get('tdedir', None)
-
-	if libdir:
-		libdir = libdir+libsuffix
-
-	## Detect the tde libraries
-	print "Checking for tde-config           : ",
-	str="which tde-config 2>/dev/null"
-	if tdedir: str="which %s 2>/dev/null" % (tdedir+'/bin/tde-config')
-	kde_config = os.popen(str).read().strip()
-	if len(kde_config):
-		print GREEN + 'tde-config was found as ' + kde_config + NORMAL
-	else:
-		if tdedir: print RED + 'tde-config was NOT found in the folder given ' + tdedir + NORMAL
-		else: print RED + 'tde-config was NOT found in your PATH' + NORMAL
-		print "Make sure kde is installed properly"
-		print "(missing package tdebase-devel?)"
-		env.Exit(1)
-	if tdedir: env['TDEDIR']=tdedir
-	else: env['TDEDIR'] = os.popen(kde_config+' -prefix').read().strip()
-
-	print "Checking for tde version          : ",
-	tde_version = os.popen(kde_config + " --version|grep TDE").read().strip().split()[1]
-	tde_major = tde_version.split('.')[0].lstrip('R')
-	tde_minor = tde_version.split('.')[1]
-	tde_patch = tde_version.split('.')[2]
-	try:
-		env['KDEm1']=int(tde_major)
-	except:
-		pass
-	try:
-		env['KDEm2']=int(tde_minor)
-	except:
-		pass
-	try:
-		env['KDEm3']=int(tde_patch)
-	except:
-		pass
-	if int(tde_major) != 14:
-		print RED + tde_version
-		print RED + "Your tde version might be too old" + NORMAL
-		print RED + "Please make sure TDE is at least R14.0" + NORMAL
-	else:
-		print GREEN + tde_version + NORMAL
-
-	## Detect the qt library
-	print "Checking for the qt library       : ",
-	qtdir = os.getenv("TQTDIR")
-	if qtdir:
-		print GREEN+"qt is in "+qtdir+NORMAL
-	else:
-		libdir = os.popen(kde_config + ' --expandvars --install lib').read().strip()
-		libtdeuiSO = libdir+'/'+getSOfromLA(libdir+'/libtdeui.la')
-		try:
-			m = re.search('(.*)/lib/libtqt.*', os.popen('ldd ' + libtdeuiSO + ' | grep libtqt').read().strip().split()[2])
-		except:
-			m = re.search('(.*)/lib/libtqt.*', os.popen('ldd ' + libtdeuiSO + ' | grep libtqt').read().strip().split()[2])
-			pass
-		if m:
-			qtdir = m.group(1)
-			print YELLOW+"qt was found as "+m.group(1)+NORMAL
-		else:
-			print RED+"qt was not found"+NORMAL
-			print RED+"Please set TQTDIR first (/usr/lib/qt3?)"+NORMAL
-			env.Exit(1)
-	env['TQTDIR'] = qtdir.strip()
-
-	## Find the necessary programs uic-tqt and moc
-	print "Checking for uic-tqt              : ",
-	uic = qtdir + "/bin/uic-tqt"
-	if os.path.isfile(uic):
-		print GREEN+"uic-tqt was found as "+uic+NORMAL
-	else:
-		uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
-		if len(uic):
-			print YELLOW+"uic-tqt was found as "+uic+NORMAL
-		else:
-			uic = os.popen("which uic-tqt 2>/dev/null").read().strip()
-			if len(uic):
-				print YELLOW+"uic-tqt was found as "+uic+NORMAL
-			else:
-				print RED+"uic-tqt was not found - set TQTDIR put it in your PATH ?"+NORMAL
-				env.Exit(1)
-	env['QT_UIC'] = uic
-
-	print "Checking for moc                  : ",
-	moc = qtdir + "/bin/tqmoc"
-	if os.path.isfile(moc):
-		print GREEN + "moc was found as " + moc + NORMAL
-	else:
-		moc = os.popen("which moc 2>/dev/null").read().strip()
-		if len(moc):
-			print YELLOW + "moc was found as " + moc + NORMAL
-		elif os.path.isfile("/usr/share/tqt3/bin/tqmoc"):
-			moc = "/usr/share/tqt3/bin/tqmoc"
-			print YELLOW + "moc was found as " + moc + NORMAL
-		elif os.path.isfile("/usr/share/qt3/bin/tqmoc"):
-			moc = "/usr/share/qt3/bin/tqmoc"
-			print YELLOW + "moc was found as " + moc + NORMAL
-		else:
-			print RED + "moc was not found - set TQTDIR or put it in your PATH ?" + NORMAL
-			env.Exit(1)
-	env['QT_MOC'] = moc
-
-	## check for the tqt includes
-	print "Checking for the tqt includes     : ",
-	if tqtincludes and os.path.isfile(tqtincludes + "/tqlayout.h"):
-		# The user told where to look for and it looks valid
-		print GREEN + "ok " + tqtincludes + NORMAL
-	else:
-		if os.path.isfile(qtdir + "/include/qlayout.h"):
-			# Automatic detection
-			print GREEN + "ok " + qtdir + "/include/ " + NORMAL
-			tqtincludes = qtdir + "/include/"
-		elif os.path.isfile("/usr/include/tqt/tqlayout.h"):
-			# Debian probably
-			print YELLOW + "the qt headers were found in /usr/include/tqt/ " + NORMAL
-			tqtincludes = "/usr/include/tqt"
-		elif os.path.isfile("/usr/include/qt4/Qt/qglobal.h"):
-			# Debian probably
-			print YELLOW + "the qt headers were found in /usr/include/qt4/ " + NORMAL
-			tqtincludes = "/usr/include/qt4"
-		else:
-			print RED + "the qt headers were not found" + NORMAL
-			env.Exit(1)
-			
-	## check for the qt includes
-	print "Checking for the qt includes      : ",
-	if qtincludes and os.path.isfile(qtincludes + "/ntqglobal.h"):
-		# The user told where to look for and it looks valid
-		print GREEN + "ok " + qtincludes + NORMAL
-	else:
-		if os.path.isfile(qtdir + "/include/ntqglobal.h"):
-			# Automatic detection
-			print GREEN + "ok " + qtdir + "/include/ " + NORMAL
-			qtincludes = qtdir + "/include/"
-		elif os.path.isfile("/usr/include/tqt3/ntqglobal.h"):
-			# Debian probably
-			print YELLOW + "the qt headers were found in /usr/include/tqt3/ " + NORMAL
-			qtincludes = "/usr/include/tqt3"
-		else:
-			print RED + "the qt headers were not found" + NORMAL
-			env.Exit(1)
-
-	print "Checking for the tde includes     : ",
-	kdeprefix = os.popen(kde_config + " --prefix").read().strip()
-	if not kdeincludes:
-		kdeincludes = kdeprefix+"/include/"
-	if os.path.isfile(kdeincludes + "/klineedit.h"):
-		print GREEN + "ok " + kdeincludes + NORMAL
-	else:
-		if os.path.isfile(kdeprefix+"/include/tde/klineedit.h"):
-			# Debian, Fedora probably
-			print YELLOW + "the kde headers were found in " + kdeprefix + "/include/tde/" + NORMAL
-			kdeincludes = kdeprefix + "/include/tde/"
-		else:
-			print RED + "The kde includes were NOT found" + NORMAL
-			env.Exit(1)
-
-	if prefix:
-		## use the user-specified prefix
-		if not execprefix:
-			execprefix = prefix
-		if not datadir:
-			datadir=prefix+"/share"
-		if not libdir:
-			libdir=execprefix+"/lib"+libsuffix
-
-		subst_vars = lambda x: x.replace('${exec_prefix}', execprefix).replace('${datadir}',datadir).replace('${libdir}', libdir)
-		debian_fix = lambda x: x.replace('/usr/share', '${datadir}')
-		env['KDEBIN']   = subst_vars(os.popen(kde_config + ' --install exe').read().strip())
-		env['KDEAPPS']  = subst_vars(os.popen(kde_config + ' --install apps').read().strip())		
-		env['KDEDATA']  = subst_vars(os.popen(kde_config + ' --install data').read().strip())
-		env['KDEMODULE']= subst_vars(os.popen(kde_config + ' --install module').read().strip())
-		env['KDELOCALE']= subst_vars(os.popen(kde_config + ' --install locale').read().strip())
-		env['KDEDOC']   = subst_vars( debian_fix(os.popen(kde_config + ' --install html').read().strip()) )
-		env['KDEKCFG']  = subst_vars(os.popen(kde_config + ' --install kcfg').read().strip())
-		env['KDEXDG']   = subst_vars(os.popen(kde_config + ' --install xdgdata-apps').read().strip())
-		env['KDEXDGDIR']= subst_vars(os.popen(kde_config + ' --install xdgdata-dirs').read().strip())
-		env['KDEMENU']  = subst_vars(os.popen(kde_config + ' --install apps').read().strip())
-		env['KDEMIME']  = subst_vars(os.popen(kde_config + ' --install mime').read().strip())
-		env['KDEICONS'] = subst_vars(os.popen(kde_config + ' --install icon').read().strip())
-		env['KDESERV']  = subst_vars(os.popen(kde_config + ' --install services').read().strip())
-	else:
-		# the user has given no prefix, install as a normal kde app
-		env['PREFIX'] = os.popen(kde_config + ' --prefix').read().strip()
-		env['KDEBIN']   = os.popen(kde_config + ' --expandvars --install exe').read().strip()
-		env['KDEAPPS']  = os.popen(kde_config + ' --expandvars --install apps').read().strip()
-		env['KDEDATA']  = os.popen(kde_config + ' --expandvars --install data').read().strip()
-		env['KDEMODULE']= os.popen(kde_config + ' --expandvars --install module').read().strip()
-		env['KDELOCALE']= os.popen(kde_config + ' --expandvars --install locale').read().strip()
-		env['KDEDOC']   = os.popen(kde_config + ' --expandvars --install html').read().strip()
-		env['KDEKCFG']  = os.popen(kde_config + ' --expandvars --install kcfg').read().strip()
-		env['KDEXDG']   = os.popen(kde_config + ' --expandvars --install xdgdata-apps').read().strip()
-		env['KDEXDGDIR']= os.popen(kde_config + ' --expandvars --install xdgdata-dirs').read().strip()
-		env['KDEMENU']  = os.popen(kde_config + ' --expandvars --install apps').read().strip()
-		env['KDEMIME']  = os.popen(kde_config + ' --expandvars --install mime').read().strip()
-		env['KDEICONS'] = os.popen(kde_config + ' --expandvars --install icon').read().strip()
-		env['KDESERV']  = os.popen(kde_config + ' --expandvars --install services').read().strip()
-
-	env['QTPLUGINS']=os.popen(kde_config + ' --expandvars --install qtplugins').read().strip()
-
-	## kde libs and includes
-	env['KDEINCLUDEPATH']=kdeincludes
-	if not tdelibs:
-		tdelibs=os.popen(kde_config + ' --expandvars --install lib').read().strip()
-	env['KDELIBPATH']=tdelibs
-
-	## qt libs and includes
-	env['QTINCLUDEPATH']=qtincludes
-	env['TQTINCLUDEPATH']=tqtincludes
-	if not tqtlibs:
-		tqtlibs=qtdir+"/lib"
-	env['TQTLIBPATH']=tqtlibs
-
-def generate(env):
-	""""Set up the qt and kde environment and builders - the moc part is difficult to understand """
-	env.Help("""
-"""+BOLD+
-"""*** KDE options ***
--------------------"""
-+NORMAL+"""
-"""+BOLD+"""* prefix     """+NORMAL+""": base install path,         ie: /usr/local
-"""+BOLD+"""* execprefix """+NORMAL+""": install path for binaries, ie: /usr/bin
-"""+BOLD+"""* datadir    """+NORMAL+""": install path for the data, ie: /usr/local/share
-"""+BOLD+"""* libdir     """+NORMAL+""": install path for the libs, ie: /usr/lib
-"""+BOLD+"""* tdedir     """+NORMAL+""": path to TDE directory,     ie: /opt/trinity
-"""+BOLD+"""* libsuffix  """+NORMAL+""": suffix of libraries on amd64, ie: 64, 32
-"""+BOLD+"""* kdeincludes"""+NORMAL+""": path to the kde includes (/usr/include/tde on debian, ...)
-"""+BOLD+"""* qtincludes """+NORMAL+""": same punishment, for qt includes (/usr/include/qt on debian, ...)
-"""+BOLD+"""* tdelibs    """+NORMAL+""": path to the kde libs, for linking the programs
-"""+BOLD+"""* tqtlibs     """+NORMAL+""": same punishment, for qt libraries
-ie: """+BOLD+"""scons configure libdir=/usr/local/lib qtincludes=/usr/include/qt
-"""+NORMAL)
-
-	import SCons.Defaults
-	import SCons.Tool
-	import SCons.Util
-
-	ui_extensions = [".ui"]
-	header_extensions = [".h", ".hxx", ".hpp", ".hh"]
-	source_extensions = [".cpp", ".cxx", ".cc"]
-
-	def find_file(filename, paths, node_factory):
-		retval = None
-		for dir in paths:
-			node = node_factory(filename, dir)
-			if node.rexists():
-				return node
-		return None
-
-	class _Metasources:
-		""" Callable class, which works as an emitter for Programs, SharedLibraries 
-		and StaticLibraries."""
-	
-		def __init__(self, objBuilderName):
-			self.objBuilderName = objBuilderName
-	
-		def __call__(self, target, source, env):
-			""" Smart autoscan function. Gets the list of objects for the Program
-			or Lib. Adds objects and builders for the special qt files. """
-			try:
-				if int(env.subst('$QT_AUTOSCAN')) == 0:
-					return target, source
-			except ValueError:
-				pass
-
-			try:
-				qtdebug = int(env.subst('$QT_DEBUG'))
-			except ValueError:
-				qtdebug = 0
-
-			# some shortcuts used in the scanner
-			FS = SCons.Node.FS.default_fs
-			splitext = SCons.Util.splitext
-			objBuilder = getattr(env, self.objBuilderName)
-	
-			# some regular expressions:
-			# Q_OBJECT detection
-			q_object_search = re.compile(r'[^A-Za-z0-9]Q_OBJECT[^A-Za-z0-9]')
-
-			# The following is kind of hacky to get builders working properly (FIXME) ??
-			objBuilderEnv = objBuilder.env
-			objBuilder.env = env
-			mocBuilderEnv = env.Moc.env
-			env.Moc.env = env
-
-			# make a deep copy for the result; MocH objects will be appended
-			out_sources = source[:]
-
-			for obj in source:
-				if not obj.has_builder():
-					# binary obj file provided
-					if qtdebug:
-						print "scons: qt: '%s' seems to be a binary. Discarded." % str(obj)
-					continue
-				cpp = obj.sources[0]
-				if not splitext(str(cpp))[1] in source_extensions:
-					if qtdebug:
-						print "scons: qt: '%s' is no cxx file. Discarded." % str(cpp)
-					# c or fortran source
-					continue
-				#cpp_contents = comment.sub('', cpp.get_contents())
-				cpp_contents = cpp.get_contents()
-	
-				h = None
-				ui = None
-	
-				for ui_ext in ui_extensions:
-					# try to find the ui file in the corresponding source directory
-					uiname = splitext(cpp.name)[0] + ui_ext
-					ui = find_file(uiname, (cpp.get_dir(),), FS.File)
-					if ui:
-						if qtdebug:
-							print "scons: qt: found .ui file of header" #% (str(h), str(cpp))
-							#h_contents = comment.sub('', h.get_contents())
-						break
-	
-				# if we have a .ui file, do not continue, it is automatically handled by Uic
-				if ui:
-					continue
-
-				for h_ext in header_extensions:
-					# try to find the header file in the corresponding source
-					# directory
-					hname = splitext(cpp.name)[0] + h_ext
-					h = find_file(hname, (cpp.get_dir(),), FS.File)
-					if h:
-						if qtdebug:
-							print "scons: qt: Scanning '%s' (header of '%s')" % (str(h), str(cpp))
-						#h_contents = comment.sub('', h.get_contents())
-						h_contents = h.get_contents()
-						break
-	
-				if not h and qtdebug:
-					print "scons: qt: no header for '%s'." % (str(cpp))
-				if h and q_object_search.search(h_contents):
-					# h file with the Q_OBJECT macro found -> add .moc or _moc.cpp file
-					moc_cpp = None
-
-					if env.has_key('NOMOCSCAN'):
-						moc_cpp = env.Moc(h)
-					else:
-						reg = '\n\s*#include\s*("|<)'+splitext(cpp.name)[0]+'.moc("|>)'
-						meta_object_search = re.compile(reg)
-						if meta_object_search.search(cpp_contents):
-							moc_cpp = env.Moc(h)
-						else:
-							moc_cpp = env.Moccpp(h)
-							moc_o = objBuilder(moc_cpp)
-							out_sources.append(moc_o)
-					if qtdebug:
-						print "scons: qt: found Q_OBJECT macro in '%s', moc'ing to '%s'" % (str(h), str(moc_cpp[0]))
-	
-				if cpp and q_object_search.search(cpp_contents):
-					print "error, bksys cannot handle cpp files with Q_OBJECT classes"
-					print "if you are sure this is a feature worth the effort, "
-					print "report this to the authors tnagyemail-mail yahoo.fr"
-
-			# restore the original env attributes (FIXME)
-			objBuilder.env = objBuilderEnv
-			env.Moc.env = mocBuilderEnv
-
-			return (target, out_sources)
-	
-	MetasourcesShared = _Metasources('SharedObject')
-	MetasourcesStatic = _Metasources('StaticObject')
-
-	CLVar = SCons.Util.CLVar
-	splitext = SCons.Util.splitext
-	Builder = SCons.Builder.Builder
-	
-	# Detect the environment - replaces ./configure implicitely and store the options into a cache
-	from SCons.Variables import Variables
-	cachefile=env['CACHEDIR']+'kde.cache.py'
-	opts = Variables(cachefile)
-	opts.AddVariables(
-		('PREFIX', 'root of the program installation'),
-
-		('TQTDIR', 'root of qt directory'),
-		('TQTLIBPATH', 'path to the qt libraries'),
-		('QTINCLUDEPATH', 'path to the qt includes'),
-		('TQTINCLUDEPATH', 'path to the tqt includes'),
-		('QT_UIC', 'moc directory'),
-		('QT_MOC', 'moc executable command'),
-		('QTPLUGINS', 'uic executable command'),
-		('TDEDIR', 'root of kde directory'),
-		('KDELIBPATH', 'path to the kde libs'),
-		('KDEINCLUDEPATH', 'path to the kde includes'),
-
-		('KDEBIN', 'installation path of the kde binaries'),
-		('KDEMODULE', 'installation path of the parts and libs'),
-		('KDEAPPS', ''),
-		('KDEDATA', 'installation path of the application data'),
-		('KDELOCALE', ''),
-		('KDEDOC', 'installation path of the application documentation'),
-		('KDEKCFG', 'installation path of the .kcfg files'),
-		('KDEXDG', 'installation path of the service types'),
-		('KDEXDGDIR', 'installation path of the xdg service directories'),
-		('KDEMENU', ''),
-		('KDEMIME', 'installation path of to the mimetypes'),
-		('KDEICONS', ''),
-		('KDEm1', ''),
-		('KDEm2', ''),
-		('KDEm3', ''),
-		('KDESERV', ''),
-	)
-	opts.Update(env)
-
-	# reconfigure when things are missing
-	if 'configure' in env['TARGS'] or not env.has_key('TQTDIR') or not env.has_key('TDEDIR'):
-		detect_kde(env)
-
-	# finally save the configuration to the cache file
-	opts.Save(cachefile, env)
-
-	## set default variables, one can override them in sconscript files
-	env.Append(CXXFLAGS = ['-I'+env['KDEINCLUDEPATH'], '-I'+env['QTINCLUDEPATH'], '-I'+env['TQTINCLUDEPATH'], '-include', 'tqt.h' ])
-	env.Append(LIBPATH = [env['KDELIBPATH'], env['TQTLIBPATH'] ])
-	
-	env['STATIC_AND_SHARED_OBJECTS_ARE_THE_SAME'] = 1
-	
-	env['QT_AUTOSCAN'] = 1
-	env['QT_DEBUG']    = 0
-	env['QT_UIC_HFLAGS']   = '-L $QTPLUGINS -nounload'
-	env['QT_UIC_CFLAGS']   = '$QT_UIC_HFLAGS -tr tr2i18n'
-	env['TQT_LIBS']      = 'tqt'
-	env['QT_UICIMPLPREFIX'] = ''
-	env['QT_UICIMPLSUFFIX'] = '.cpp'
-
-	env['QT_MOCHPREFIX']    = ''
-	env['QT_MOCHSUFFIX']    = '.moc'
-	env['KDE_KCFG_IMPLPREFIX'] = ''
-	env['KDE_KCFG_IMPL_HSUFFIX'] = '.h'
-	env['KDE_KCFG_IMPL_CSUFFIX'] = '.cpp'
-	env['KDE_SKEL_IMPL_SUFFIX']  = '.skel'
-	env['MEINPROC']              = 'meinproc'
-	env['MSGFMT']                = 'msgfmt'
-
-	## ui file processing
-	def uicGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('$QT_UIC $QT_UIC_HFLAGS -o '+target[0].path+' '+source[0].path)
-		act.append('rm -f '                           +target[1].path)
-		act.append('echo \'#include <tdelocale.h>\' >> '+target[1].path)
-		act.append('echo \'#include <kdialog.h>\' >> '+target[1].path)
-		act.append('$QT_UIC $QT_UIC_CFLAGS -impl '+target[0].path+' -o '+target[1].path+'.tmp '+source[0].path)
-		act.append('cat '+target[1].path+'.tmp >> '+target[1].path)
-		act.append('rm -f '+target[1].path+'.tmp')
-		act.append('echo \'#include "' + target[2].name + '"\' >> '+target[1].path)
-		act.append('moc-tqt $QT_MOC '+target[0].path+' '+target[2].path)
-		return act
-	
-	def uicEmitter(target, source, env):
-		adjustixes = SCons.Util.adjustixes
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		# first target is automatically added by builder (.h file)
-		if len(target) < 2:
-			# second target is .cpp file
-			target.append(adjustixes(bs,
-				env.subst('$QT_UICIMPLPREFIX'),
-				env.subst('$QT_UICIMPLSUFFIX')))
-		if len(target) < 3:
-			# third target is .moc file
-			target.append(adjustixes(bs,
-				env.subst('$QT_MOCHPREFIX'),
-				env.subst('$QT_MOCHSUFFIX')))
-		return target, source
-	
-	UIC_BUILDER = Builder(
-		generator  = uicGenerator,
-		emitter    = uicEmitter,
-		suffix     = '.h',
-		src_suffix = '.ui')
-	
-	## moc file processing
-	env['QT_MOCCOM'] = ('moc-tqt $QT_MOC $SOURCE ${TARGETS[0]}')
-	
-	MOC_BUILDER = Builder(
-		action     = '$QT_MOCCOM',
-		suffix     = '.moc',
-		src_suffix = '.h')
-	
-	MOCCPP_BUILDER = Builder(
-		action     = '$QT_MOCCOM',
-		suffix     = '_moc.cpp',
-		src_suffix = '.h')
-	
-	## kcfg file processing
-	def kcfgGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('tdeconfig_compiler -d'+str(source[0].get_dir())+' '+source[1].path+' '+source[0].path)
-		return act
-	
-	def kcfgEmitter(target, source, env):
-		adjustixes = SCons.Util.adjustixes
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		# .h file is automatically added
-		if len(target) < 2:
-			# add .cpp file
-			target.append(adjustixes(bs, env.subst('$KDE_KCFG_IMPLPREFIX'), env.subst('$KDE_KCFG_IMPL_CSUFFIX')))
-	
-		if len(source) <2:
-			if not os.path.isfile(str(source[0])):
-				print RED+'kcfg file given'+str(source[0])+' does not exist !'+NORMAL
-				return target, source
-			kfcgfilename=""
-			kcfgFileDeclRx = re.compile("^[fF]ile\s*=\s*(.+)\s*$")
-			for line in file(str(source[0]), "r").readlines():
-				match = kcfgFileDeclRx.match(line.strip())
-				if match:
-					kcfgfilename = match.group(1)
-					break
-			source.append(str(source[0].get_dir())+'/'+kcfgfilename)
-		return target, source
-
-	KCFG_BUILDER = Builder(
-		generator  = kcfgGenerator,
-		emitter    = kcfgEmitter,
-		suffix     = '.h',
-		src_suffix = '.kcfgc')
-	
-	## dcop processing
-	def dcopGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('dcopidl '+source[0].path+' > '+target[1].path+'|| ( rm -f '+target[1].path+' ; false)')
-		act.append('dcopidl2cpp --c++-suffix cpp --no-signals --no-stub '+target[1].path)
-		return act
-
-	def dcopEmitter(target, source, env):
-		bs = SCons.Util.splitext(str(source[0].name))[0]
-		bs = os.path.join(str(target[0].get_dir()),bs)
-		target.append(bs+'.kidl')
-		#target.append(bs+'_skel.cpp')
-		return target, source
-
-	DCOP_BUILDER = Builder(
-		generator  = dcopGenerator,
-		emitter    = dcopEmitter,
-		suffix     = '_skel.cpp',
-		src_suffix = '.h')
-
-	## documentation processing
-	MEINPROC_BUILDER = Builder(
-		action     = '$MEINPROC --check --cache $TARGET $SOURCE',
-		suffix     = '.cache.bz2')
-
-	## translation files builder
-	TRANSFILES_BUILDER = Builder(
-		action     = '$MSGFMT $SOURCE -o $TARGET',
-		suffix     = '.gmo',
-		src_suffix = '.po')
-
-	## libtool file builder
-	def laGenerator(target, source, env, for_signature):
-		act=[]
-		act.append('echo "dlname=\''+source[0].name+'\'" > '+target[0].path)
-		act.append('echo "library_names=\''+source[0].name+' '+source[0].name+' '+source[0].name+'\'" >> '+target[0].path)
-		act.append('echo "old_library=\'\'">> '+target[0].path)
-		act.append('echo "dependency_libs=\'\'">> '+target[0].path)
-		act.append('echo "current=0">> '+target[0].path)
-		act.append('echo "age=0">> '+target[0].path)
-		act.append('echo "revision=0">> '+target[0].path)
-		act.append('echo "installed=yes">> '+target[0].path)
-		act.append('echo "shouldnotlink=no">> '+target[0].path)
-		act.append('echo "dlopen=\'\'">> '+target[0].path)
-		act.append('echo "dlpreopen=\'\'">> '+target[0].path)
-		act.append('echo "libdir=\''+env['KDEMODULE']+'\'" >> '+target[0].path)
-		env.Depends(target, source)
-		return act
-	LA_BUILDER = Builder(
-		generator  = laGenerator,
-		suffix     = '.la',
-		src_suffix = env['SHLIBSUFFIX'])
-	
-	## register the builders
-	env['BUILDERS']['Uic']       = UIC_BUILDER
-	env['BUILDERS']['Moc']       = MOC_BUILDER
-	env['BUILDERS']['Moccpp']    = MOCCPP_BUILDER
-	env['BUILDERS']['Dcop']      = DCOP_BUILDER
-	env['BUILDERS']['Kcfg']      = KCFG_BUILDER
-	env['BUILDERS']['LaFile']    = LA_BUILDER
-	env['BUILDERS']['Meinproc']  = MEINPROC_BUILDER
-	env['BUILDERS']['Transfiles']= TRANSFILES_BUILDER
-
-	static_obj, shared_obj = SCons.Tool.createObjBuilders(env)
-	static_obj.src_builder.append('Uic')
-	shared_obj.src_builder.append('Uic')
-	static_obj.src_builder.append('Kcfg')
-	shared_obj.src_builder.append('Kcfg')
-	static_obj.src_builder.append('LaFile')
-	shared_obj.src_builder.append('LaFile')
-	static_obj.src_builder.append('Meinproc')
-	shared_obj.src_builder.append('Meinproc')
-	static_obj.src_builder.append('Transfiles')
-	shared_obj.src_builder.append('Transfiles')
-
-	## Find the files to moc, dcop, and link against kde and qt
-	env.AppendUnique(PROGEMITTER = [MetasourcesStatic], SHLIBEMITTER=[MetasourcesShared], LIBEMITTER =[MetasourcesStatic])
-
-	## Handy helpers for building kde programs
-	## You should not have to modify them ..
-
-	#import SCons.Util
-	skel_ext = [".skel", ".SKEL"]
-	def KDEfiles(lenv, target, source):
-		""" Returns a list of files for scons (handles kde tricks like .skel) 
-		It also makes custom checks against double includes like : ['file.ui', 'file.cpp']
-		(file.cpp is already included because of file.ui) """
-
-		src=[]
-		ui_files=[]
-		kcfg_files=[]
-		skel_files=[]
-		other_files=[]
-
-		# For each file, check wether it is a dcop file or not, and create the complete list of sources
-		for file in source:
-			bs  = SCons.Util.splitext(file)[0]
-			ext = SCons.Util.splitext(file)[1]
-			if ext in skel_ext:
-				lenv.Dcop(bs+'.h')
-				src.append(bs+'_skel.cpp')
-			elif ext == ".moch":
-				lenv.Moccpp(bs+'.h')
-				src.append(bs+'_moc.cpp')
-			else:
-				src.append(file)
-
-			if ext == '.ui':
-				ui_files.append(bs)
-			elif ext == '.kcfgc':
-				kcfg_files.append(bs)
-			elif ext == '.skel':
-				skel_files.append(bs)
-			else:
-				other_files.append(bs)	
-		
-		# Now check against typical newbie errors
-		for file in ui_files:
-			for ofile in other_files:
-				if ofile == file:
-					print RED+"WARNING: You have included "+file+".ui and another file of the same prefix"+NORMAL
-					print "Files generated by uic (file.h, file.cpp must not be included"
-		for file in kcfg_files:
-			for ofile in other_files:
-				if ofile == file:
-					print RED+"WARNING: You have included "+file+".kcfg and another file of the same prefix"+NORMAL
-					print "Files generated by tdeconfig_compiler (settings.h, settings.cpp) must not be included"
-		return src
-
-
-	"""
-	In the future, these functions will contain the code that will dump the
-	configuration for re-use from an IDE
-	"""
-	import glob
-	def KDEinstall(lenv, restype, subdir, files):
-		if not 'install' in env['TARGS']:
-			return
-		basedir=env['DESTDIR']
-		if len(restype)>0:
-			if not lenv.has_key(restype):
-				print RED+"unknown resource type "+restype+NORMAL
-			else:
-				basedir += lenv[restype]+'/'
-		#print file # <- useful to trace stuff :)
-		install_list =  env.Install(basedir+subdir+'/', files)
-		env.Alias('install', install_list)
-		return install_list
-
-	def KDEinstallas(lenv, restype, destfile, file):
-		if not 'install' in env['TARGS']:
-			return
-		basedir=env['DESTDIR']
-		if len(restype)>0:
-			if not lenv.has_key(restype):
-				print RED+"unknown resource type "+restype+NORMAL
-			else:
-				basedir += lenv[restype]+'/'
-		install_list = env.InstallAs(basedir+destfile, file)
-		env.Alias('install', install_list)
-		return install_list
-
-	def KDEprogram(lenv, target, source):
-		""" Makes a kde program 
-		The program is installed except if one sets env['NOAUTOINSTALL'] """
-		src = KDEfiles(lenv, target, source)
-		program_list = lenv.Program(target, src)
-		if not lenv.has_key('NOAUTOINSTALL'):
-			KDEinstall(lenv, 'KDEBIN', '', target)
-		return program_list
-
-	def KDEshlib(lenv, target, source, kdelib=0, libprefix='lib'):
-		""" Makes a shared library for kde (.la file for klibloader)
-		The library is installed except if one sets env['NOAUTOINSTALL'] """
-		src = KDEfiles(lenv, target, source)
-		lenv['LIBPREFIX']=libprefix
-		library_list = lenv.SharedLibrary(target, src)
-		lafile_list  = lenv.LaFile(target, library_list)
-		if not lenv.has_key('NOAUTOINSTALL'):
-			install_dir = 'KDEMODULE'
-			if kdelib==1:
-				install_dir = 'KDELIBPATH'
-			KDEinstall(lenv, install_dir, '', library_list)
-			KDEinstall(lenv, install_dir, '', lafile_list)
-		return library_list
-
-	def KDEstaticlib(lenv, target, source):
-		""" Makes a static library for kde - in practice you should not use static libraries 
-		1. they take more memory than shared ones
-		2. makefile.am needed it because of limitations
-		(cannot handle sources in separate folders - takes extra processing) """
-		src = KDEfiles(lenv, target, source)
-		return lenv.StaticLibrary(target, src)
-		# do not install static libraries by default
-
-	def KDEaddflags_cxx(lenv, fl):
-		""" Compilation flags for C++ programs """
-		lenv.AppendUnique(CXXFLAGS = fl)
-	
-	def KDEaddflags_c(lenv, fl):
-		""" Compilation flags for C programs """
-		lenv.AppendUnique(CFLAGS = fl)
-
-	def KDEaddflags_link(lenv, fl):
-		""" Add link flags - Use this if KDEaddlibs below is not enough """
-		lenv.AppendUnique(LINKFLAGS = fl)
-
-	def KDEaddlibs(lenv, libs):
-		""" Helper function """
-		lenv.AppendUnique(LIBS = libs)
-
-	def KDEaddpaths_includes(lenv, paths):
-		""" Add new include paths """
-		lenv.AppendUnique(CPPPATH = paths)
-
-	def KDEaddpaths_libs(lenv, paths):
-		""" Add paths to libraries """
-		lenv.AppendUnique(LIBPATH = paths)
-
-	def KDElang(lenv, folder, appname):
-		""" Process translations (.po files) in a po/ dir """
-		transfiles = glob.glob(folder+'/*.po')
-		for lang in transfiles:
-			result = lenv.Transfiles(lang)
-			country = SCons.Util.splitext(result[0].name)[0]
-			KDEinstallas(lenv, 'KDELOCALE', country+'/LC_MESSAGES/'+appname+'.mo', result)
-
-	def KDEicon(lenv, icname):
-		""" Emulates the behaviour of Makefile.am to install icons
-		Contributed by: "Andrey Golovizin" <grooz@gorodok@net> """
-		type_dic = { 'action' : 'actions', 'app' : 'apps', 'device' : 
-			'devices', 'filesys' : 'filesystems', 'mime' : 'mimetypes' } 
-		dir_dic = {
-		'los'  :'locolor/16x16',
-		'lom'  :'locolor/32x32',
-		'him'  :'hicolor/32x32',
-		'hil'  :'hicolor/48x48',
-		'lo16' :'locolor/16x16',
-		'lo22' :'locolor/22x22',
-		'lo32' :'locolor/32x32',
-		'hi16' :'hicolor/16x16',
-		'hi22' :'hicolor/22x22',
-		'hi32' :'hicolor/32x32',
-		'hi48' :'hicolor/48x48',
-		'hi64' :'hicolor/64x64',
-		'hi128':'hicolor/128x128',
-		'hisc' :'hicolor/scalable',
-		'cr16' :'crystalsvg/16x16',
-		'cr22' :'crystalsvg/22x22',
-		'cr32' :'crystalsvg/32x32',
-		'cr48' :'crystalsvg/48x48',
-		'cr64' :'crystalsvg/64x64',
-		'cr128':'crystalsvg/128x128',
-		'crsc' :'crystalsvg/scalable'
-		}
-
-		iconfiles = []
-		for ext in ['png', 'xpm', 'mng', 'svg', 'svgz']:
-			files = glob.glob('*-*-%s.%s' % (icname, ext))
-			iconfiles += files
-		for iconfile in iconfiles:
-			tmp = iconfile.split('-')
-			if len(tmp)!=3:
-				print RED+'WARNING: icon filename has unknown format: '+iconfile+NORMAL
-				continue
-			[icon_dir, icon_type, icon_filename]=tmp
-			try:
-				destfile = '%s/%s/%s/%s' % (lenv['KDEICONS'], dir_dic[icon_dir], type_dic[icon_type], icon_filename)
-			except KeyError:
-				print RED+'WARNING: unknown icon type: '+iconfile+NORMAL
-				continue
-			## Do not use KDEinstallas here, as parsing from an ide will be necessary
-			if 'install' in env['TARGS']:
-				env.Alias('install', env.InstallAs( env['DESTDIR']+'/'+destfile, iconfile ) )
-
-	# Attach the functions to the environment so that sconscripts can use them
-	from SCons.Script.SConscript import SConsEnvironment
-	SConsEnvironment.KDEprogram = KDEprogram
-	SConsEnvironment.KDEshlib = KDEshlib
-	SConsEnvironment.KDEstaticlib = KDEstaticlib
-	SConsEnvironment.KDEinstall = KDEinstall
-	SConsEnvironment.KDEinstallas = KDEinstallas
-	SConsEnvironment.KDElang = KDElang
-	SConsEnvironment.KDEicon = KDEicon
-
-	SConsEnvironment.KDEaddflags_cxx = KDEaddflags_cxx
-	SConsEnvironment.KDEaddflags_c = KDEaddflags_c
-	SConsEnvironment.KDEaddflags_link = KDEaddflags_link
-	SConsEnvironment.KDEaddlibs = KDEaddlibs
-	SConsEnvironment.KDEaddpaths_includes = KDEaddpaths_includes
-	SConsEnvironment.KDEaddpaths_libs = KDEaddpaths_libs
-
diff --git a/po/CMakeLists.txt b/po/CMakeLists.txt
index 46fba83..75c89f8 100644
--- a/po/CMakeLists.txt
+++ b/po/CMakeLists.txt
@@ -1,6 +1,14 @@
-# build translations if some are already available
+file( GLOB_RECURSE po_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.po )
+string( REGEX REPLACE "[ \r\n\t]+" ";" _linguas "$ENV{LINGUAS}" )
 
-file( GLOB _srcs RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.po )
-if( _srcs )
-  tde_create_translation( LANG auto OUTPUT_NAME ${PROJECT_NAME} )
-endif( )
+foreach( _po ${po_files} )
+  get_filename_component( _lang ${_po} NAME_WE )
+  if( "${_linguas}" MATCHES "^;*$" OR ";${_linguas};" MATCHES ";${_lang};" )
+    if( "${_po}" MATCHES "^([^/]*)/.*" )
+      string( REGEX REPLACE "^([^/]*)/.*" "\\1" _component "${_po}" )
+    else( )
+      set( _component "${PROJECT_NAME}" )
+    endif( )
+    tde_create_translation( FILES ${_po} LANG ${_lang} OUTPUT_NAME ${_component} )
+  endif( )
+endforeach( )
diff --git a/po/SConscript b/po/SConscript
deleted file mode 100644
index 43206be..0000000
--- a/po/SConscript
+++ /dev/null
@@ -1,24 +0,0 @@
-## This script demonstrates to build and install
-## a simple kde program having KconfigXT settings
-## with scons
-##
-## Thomas Nagy, 2004, 2005
-
-## This file can be reused freely for any project (see COPYING)
-
-
-## First load the environment set in the top-level SConstruct file
-#Import( "env KDElang" )
-Import('env')
-myenv=env.Clone()
-
-## Make translations for the program "test1" in french (requires fr.po)
-myenv['APPNAME'] = "kstreamripper"
-#KDElang( ['fr'], myenv )
-
-## NOTE1 :
-# KDElang( ['fr','de','nl','pl'], myenv )
-
-## NOTE2 :
-## updating the translation files must be done manually
-## for the moment, using the messages.sh script
diff --git a/po/messages.sh b/po/messages.sh
deleted file mode 100755
index 3020ce8..0000000
--- a/po/messages.sh
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-
-# Inspired by Makefile.common from coolo
-# this script is used to update the .po files
-
-# To update the translations, you will need a specific gettext 
-# patched for kde and a lot of patience, tenacity, luck, time ..
-
-
-# I guess one should only update the .po files when all .cpp files 
-# are generated (after a make or scons)
-
-# If you have a better way to do this, do not keep that info 
-# for yourself and help me to improve this script, thanks
-# (tnagyemail-mail tat yahoo d0tt fr)
-
-SRCDIR=../test1-tdeconfigxt # srcdir is the directory containing the source code
-TIPSDIR=$SRCDIR # tipsdir is the directory containing the tips
-
-TDEDIR=`tde-config --prefix`
-EXTRACTRC=extractrc
-KDEPOT=`tde-config --prefix`/include/kde.pot
-XGETTEXT="xgettext -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x $KDEPOT "
-
-## check that kde.pot is available
-if ! test -e $KDEPOT; then
-	echo "$KDEPOT does not exist, there is something wrong with your installation!"
-	XGETTEXT="xgettext -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale "
-fi
-
-> rc.cpp
-
-## extract the strings
-echo "extracting the strings"
-
-# process the .ui and .rc files
-$EXTRACTRC `find $SRCDIR -iname *.rc` >> rc.cpp
-$EXTRACTRC `find $SRCDIR -iname *.ui` >> rc.cpp
-echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > $SRCDIR/_translatorinfo.cpp
-
-# process the tips - $SRCDIR is supposed to be where the tips are living
-pushd $TIPSDIR; preparetips >tips.cpp; popd
-
-$XGETTEXT `find $SRCDIR -name "*.cpp"` -o kdissert.pot
-
-# remove the intermediate files
-rm -f $TIPSDIR/tips.cpp
-rm -f rc.cpp
-rm -f $SRCDIR/_translatorinfo.cpp
-
-## now merge the .po files ..
-echo "merging the .po files"
-
-for i in `ls *.po`; do
-    msgmerge $i kdissert.pot -o $i || exit 1
-done
-
-## finished
-echo "Done"
-
diff --git a/scons-mini.tar.bz2 b/scons-mini.tar.bz2
deleted file mode 100644
index 0c1ce52..0000000
--- a/scons-mini.tar.bz2
+++ /dev/null
diff --git a/scons-mini.tar.bz2.cdbs-config_list b/scons-mini.tar.bz2.cdbs-config_list
deleted file mode 100644
index e69de29..0000000
--- a/scons-mini.tar.bz2.cdbs-config_list
+++ /dev/null
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 1ec9d52..7eacdcf 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -46,7 +46,4 @@ install(
     DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}
 )
 
-install(
-    FILES ${PROJECT_NAME}.desktop
-    DESTINATION ${XDG_APPS_INSTALL_DIR}
-)
+tde_create_translated_desktop( ${PROJECT_NAME}.desktop )
diff --git a/src/SConscript b/src/SConscript
deleted file mode 100644
index 97a8595..0000000
--- a/src/SConscript
+++ /dev/null
@@ -1,68 +0,0 @@
-#! /usr/bin/env python
-## This script demonstrates how to build and install
-## a simple kde program having KconfigXT settings
-## with scons
-##
-## Thomas Nagy, 2004, 2005
-
-## This file can be reused freely for any project (see COPYING)
-
-############################
-## load the config
-
-## Use the environment and the tools set in the top-level
-## SConstruct file (set with 'Export') - this is very important
-
-Import( 'env' )
-myenv=env.Clone()
-
-#############################
-## the programs to build
-
-# The sources for our program - only .ui, .skel and .cpp are accepted
-kstreamripper_sources = """
-addnewstreamimpl.cpp 
-addnewstream.ui 
-kstreamripperbase.ui 
-kstreamripper.cpp 
-main.cpp 
-processcontroller.cpp
-processlistviewitem.cpp
-""".split()
-
-# Our main program
-# KDEprogram add the file to the install targets automatically,
-# so you do not need to write KDEinstall('KDEBIN', '', test1, myenv)
-myenv.KDEprogram( "kstreamripper", kstreamripper_sources )
-
-############################
-## Customization
-
-## Additional include paths for compiling the source files
-## Always add '../' (top-level directory) because moc makes code that needs it
-myenv.KDEaddpaths_includes( ['./', '../'] )
-
-## Necessary libraries to link against
-myenv.KDEaddlibs( ['tqt-mt', 'tqt', 'tdecore', 'tdeio', 'tdeui', 'tdednssd'] )
-#############################
-## Data to install
-
-## The ui.rc file and the tips go into datadir/appname/
-myenv.KDEinstall( 'KDEDATA', 'kstreamripper', 'kstreamripperui.rc' )
-
-## The kcfg file is installed in a global kcfg directory
-#myenv.KDEinstall( 'KDEKCFG', '', 'test1.kcfg' )
-
-## Warning : there is a difference between the normal destop file used for the menu
-##     and the servicetype desktop file, so they go in different directories
-##     you will find more information in 'test3'
-myenv.KDEinstall( 'KDEXDG', '', 'kstreamripper.desktop')
-
-## Use this when you need to install a mimetype file
-#myenv.KDEinstall( 'KDEMIME', 'application', 'x-test1.desktop' )
-
-## Installing icons is easy (hi-16-app-test1.png, hi-22-app-test1.png)
-## do not forget that this is a python script so loops are allowed here :)
-myenv.KDEicon( 'hi16-app-kstreameripper.png')
-myenv.KDEicon( 'hi32-app-kstreameripper.png')
-
diff --git a/unpack_local_scons.sh b/unpack_local_scons.sh
deleted file mode 100755
index a1266fc..0000000
--- a/unpack_local_scons.sh
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh
-
-BOLD="\033[1m"
-RED="\033[91m"
-GREEN="\033[92m"
-YELLOW="\033[93m"
-CYAN="\033[96m"
-NORMAL="\033[0m"
-
-#bunzip2 scons-mini.tar.bz2
-#tar xvf scons-mini.tar
-
-# if kde is there a recent tar should be too
-tar xjvf scons-mini.tar.bz2
-
-cat > Makefile << EOF
-## Makefile automatically generated by unpack_local_scons.sh
-
-### To use scons when installed globally use
-#SCONS=scons
-### To run the local version instead, define
-SCONS=./scons
-
-# scons            : compile
-# scons -c         : clean
-# scons install    : install
-# scons -c install : uninstall and clean
-
-# default target : use scons to build the programs
-all:
-	\$(SCONS) -Q
-
-### There are several possibilities to help debugging :
-# scons --debug=explain, scons --debug=tree ..
-#
-### To optimize the runtime, use
-# scons --max-drift=1 --implicit-deps-unchanged
-debug:
-	\$(SCONS) -Q --debug=tree
-
-clean:
-	\$(SCONS) -c
-
-install:
-	\$(SCONS) install
-
-uninstall:
-	\$(SCONS) -c install
-
-## this target creates a tarball of the project
-dist:
-	\$(SCONS) dist
-EOF
-
-
-echo ""
-echo -e $GREEN"A minimum scons distribution has been unpacked right here"
-echo -e $GREEN"you can now run : "$NORMAL
-echo -e $BOLD"./scons"$NORMAL
-echo -e $BOLD"./scons install$NORMAL (as root probably)"
-