Drop automake build support.

Add basic build instructions.
Rework of the README, INSTALL and help page.
Remove empty folder templates and the NEWS file.
Delete the INSTALL.debian and INSTALL.gentoo files.
Create the doc/misc folder to hold lot of config
and/or readme files.

Signed-off-by: gregory guy <[email protected]>
(cherry picked from commit 9b99335373bb5e06cfb2cdbbff4f6d45b3d0edda)

1 files changed, 622 insertions, 0 deletions

diff --git a/doc/misc/vpnc-0.3.1-strings.txt b/doc/misc/vpnc-0.3.1-strings.txt
new file mode 100644
index 0000000..d86e142
--- /dev/null
+++ b/doc/misc/vpnc-0.3.1-strings.txt
@@ -0,0 +1,622 @@
+/lib/ld-linux.so.2
+SuSE
+libgcrypt.so.11
+gcry_md_get_algo_dlen
+gcry_mpi_scan
+gcry_md_close
+gcry_mpi_get_nbits
+gcry_md_read
+gcry_md_setkey
+gcry_mpi_copy
+gcry_mpi_powm
+gcry_control
+gcry_randomize
+gcry_md_write
+gcry_mpi_mul_2exp
+gcry_cipher_open
+gcry_cipher_ctl
+gcry_md_hash_buffer
+gcry_cipher_close
+gcry_cipher_algo_info
+gcry_free
+gcry_mpi_add_ui
+gcry_cipher_encrypt
+gcry_md_open
+gcry_check_version
+gcry_mpi_set_ui
+gcry_cipher_decrypt
+gcry_mpi_new
+gcry_mpi_release
+_Jv_RegisterClasses
+gcry_md_ctl
+gcry_mpi_aprint
+__gmon_start__
+libgpg-error.so.0
+_DYNAMIC
+_init
+_fini
+_GLOBAL_OFFSET_TABLE_
+libc.so.6
+putchar
+strcpy
+unsetenv
+ioctl
+stdout
+connect
+getenv
+__strtol_internal
+getpid
+__getdelim
+memcpy
+perror
+puts
+getpass
+system
+feof
+malloc
+recvfrom
+socket
+fflush
+strncasecmp
+abort
+uname
+calloc
+fprintf
+strcat
+bind
+chdir
+setsockopt
+stdin
+signal
+openlog
+strncmp
+strncpy
+strcasecmp
+sendto
+realloc
+__strdup
+fork
+inet_aton
+memset
+inet_ntoa
+time
+__assert_fail
+poll
+syslog
+gethostbyname
+asprintf
+fclose
+stderr
+fwrite
+__errno_location
+inet_ntop
+fopen
+_IO_stdin_used
+_exit
+__libc_start_main
+strchr
+setsid
+getsockname
+_edata
+__bss_start
+_end
+GLIBC_2.1
+GLIBC_2.0
+GCRYPT_1.2
+PTRh
+QVh\
+jyh&%
+jzh&%
+[^_]
+[^_]
+[^_]
+Pht%
+[^_]
+[^_]
+[^_]
+[^_]
+[^_]
+;BDt
+Ph)&
+pDSh<&
+[^_]
+wDPS
+[^_]
+[^_]
+[^_]
+rDPS
+[^_]
+[^_]
+Pht&
+Sh}&
+;BDt
+;FDt
+qDPh
+PVh!'
+rDPS
+q4h2'
+rDPS
+q0h;'
+C(;CD
+CD;C(
+w$hM'
+G@;GDv
+v@PS
+vLhv'
+[^_]
+Ph4(
+[^_]
+Ph|,
+Vhz(
+Vhm(
+Ph0)
+Ph|,
+PhL)
+[^_]
+[^_]
+[^_]
+Pha)
+Ph -
+PSh!'
+[^_]
+Vh0.
+ShK.
+[^_]
+F	PS
+F	PS
+F	PS
+[^_]
+[^_]
+[^_]
+[^_]
+[^_]
+Ph(/
+G	Ph1/
+Ph;/
+PhL/
+G	PhU/
+Phb/
+G	Phj/
+Phv/
+G	PhU/
+[^_]
+Sht&
+Ph!0
+Ph*0
+Ph20
+PhA0
+PhO0
+PhU0
+Phr'
+[^_]
+C Pj
+Ph	<
+[^_]
+C Pj
+Ph	<
+[^_]
+PhH>
+;V(t<
+9Z8u
+9B`t
+[^_]
+SQhx>
+pHSh
+pHSj
+[^_]
+[^_]
+[^_]
+Php=
+[^_]
+P`Qh o
+p8hh?
+Ph,)
+PhLn
+ hHn
+PRh1@
+PRh;@
+7RhE@
+ PRhO@
+;PhU@
+[^_]
+[^_]
+VWhPD
+[^_]
+RhFD
+Ph]D
+[^_]
+[^_]
+[^_]
+[^_]
+[^_]
+[^_]
+[^_]
+nopfs
+sha1
+3des
+aes128
+aes192
+aes256
+get_algo
+vpnc.c
+what <= SUPP_ALGO_CRYPT
+key <= SUPP_ALGO_IPSEC_SA
+server
+making socket
+binding to port %d
+out of memory
+unknown host `%s'
+using interface %s
+TUNDEV
+VPNGATEWAY
+receiving packet
+can't send packet
+can't poll socket
+no response from target
+hashlen: %lu
+u.hash.length: %d
+expected_hash
+h->u.hash.data
+authing NULL package!
+S4.1
+i_cookie
+i_nonce
+S4.2
+dh_public
+S4.3
+S4.4
+response was invalid [1]: %s
+IKE SA selected %s-%s
+response was invalid [2]: %s
+response was invalid [3]: %s
+skeyid
+returned_hash
+dh_shared_secret
+skeyid_d
+skeyid_a
+skeyid_e
+enc-key
+do_phase_1
+s->ivlen <= s->md_len
+current_iv
+S4.5
+NAT status: no NAT-T VID seen
+initial_iv
+S4.6
+S5.1
+S5.2
+malformed loadbalance target
+S5.3
+S5.4
+%c%c
+%.*s%s
+S5.5
+xauth packet unsupported: %s
+Answer
+Password
+Passcode
+%s for VPN %s@%s: 
+S5.6
+authentication unsuccessful
+S5.7
+CISCO_BANNER
+CISCO_DEF_DOMAIN
+INTERNAL_IP4_NBNS
+INTERNAL_IP4_DNS
+INTERNAL_IP4_NETMASK
+INTERNAL_IP4_ADDRESS
+ignoring zero length netmask
+Banner: 
+Remote Application Version: 
+got pfs setting: %d
+unknown attriube %d / 0x%X
+got address %s
+S7.1
+len = %d
+S7.2
+S7.3
+S7.4
+S7.5
+S7.6
+IPSEC SA selected %s-%s
+S7.7
+S7.8
+S7.9
+S7.10
+1.1.90
+hex_test
+vpnc version 0.3.1
+can't initialise tunnel interface
+got response from unknown host %s:%d
+NAT-T mode, adding non-esp marker
+---!!!!!!!!! entering phase2_fatal !!!!!!!!!---
+generating %d bytes keymat (cnt=%d)
+unknown attribute %d, arborting..
+hash comparison failed: %s
+check group password!
+NAT status: this end behind NAT? %s -- remote end behind NAT? %s
+NAT status: NAT-T VID seen, no NAT device detected
+got cisco loadbalancing notice, diverting to %s
+got responder liftime notice, ignoring..
+expected xauth packet; rejected: %s
+server requested domain, but none set (use "Domain ..." in config or --domain
+xauth SET response rejected: %s
+configuration response rejected: %s
+got peer udp encapsulation port: %hu
+ignoring responder-lifetime notify
+quick mode response rejected: %s
+check pfs setting
+quick mode response rejected [2]: %s
+; H_
+malloc of %lu bytes failed
+alloc of %lud bytes failed
+flatten_isakmp_packet
+isakmp-pkt.c
+blksz != 0
+t.attributes.type
+t.attributes.u.attr_16
+t.attributes.u.lots.length
+(not dumping xauth data)
+t.attributes.u.lots.data
+next_type
+sa.doi
+sa.situation
+p.number
+p.prot_id
+p.spi_size
+p.spi
+t.number
+t.id
+ke.data
+id.type
+id.protocol
+id.port
+id.data
+cert.encoding
+cert.data
+n.doi
+n.protocol
+n.spi_length
+n.type
+n.spi
+n.data
+d.num_spi
+d.spi
+modecfg.type
+UNKNOWN.data
+DONE PARSING PAYLOAD type
+BEGIN_PARSE
+r_cookie
+payload
+isakmp_version
+exchange_type
+flags
+message_id
+PARSE_OK
+INVALID_PAYLOAD_TYPE
+DOI_NOT_SUPPORTED
+SITUATION_NOT_SUPPORTED
+INVALID_COOKIE
+INVALID_MAJOR_VERSION
+INVALID_MINOR_VERSION
+INVALID_EXCHANGE_TYPE
+INVALID_FLAGS
+INVALID_MESSAGE_ID
+INVALID_PROTOCOL_ID
+INVALID_SPI
+INVALID_TRANSFORM_ID
+ATTRIBUTES_NOT_SUPPORTED
+NO_PROPOSAL_CHOSEN
+BAD_PROPOSAL_SYNTAX
+PAYLOAD_MALFORMED
+INVALID_KEY_INFORMATION
+INVALID_ID_INFORMATION
+INVALID_CERT_ENCODING
+INVALID_CERTIFICATE
+CERT_TYPE_UNSUPPORTED
+INVALID_CERT_AUTHORITY
+INVALID_HASH_INFORMATION
+AUTHENTICATION_FAILED
+INVALID_SIGNATURE
+ADDRESS_NOTIFICATION
+NOTIFY_SA_LIFETIME
+CERTIFICATE_UNAVAILABLE
+UNSUPPORTED_EXCHANGE_TYPE
+UNEQUAL_PAYLOAD_LENGTHS
+|S5v
+size = %ld, blksz = %ld, padding = %ld
+ sending: ========================>
+(not dumping xauth data length)
+recvfrom: %m
+packet too short from %s
+truncated in: %d -> %d
+socket(SOCK_RAW)
+setsockopt(IP_HDRINCL)
+ipesp
+udpesp
+socket: %m
+connect: %m
+getsockname: %m
+local address for %s is %s
+unknown spi %ld
+hmac_compute
+tunip.c
+md_ctx != 0
+ret == 0
+sending ESP packet (after ah)
+sendto: %m
+truncated out (%d out of %d)
+Packet too short
+HMAC mismatch in ESP mode
+Inconsistent padlen
+Inconsistent next_header %d
+Bad padding
+poll: %m
+read: %m
+routing loop to %s
+unknown spi from %s
+terminated
+tous.enc_secret
+tous.auth_secret
+tothem.enc_secret
+tothem.auth_secret
+vpnc
+VPNC started in foreground...
+can't find a local address for packets to %s
+sending packet: len = %d, padding = %lu
+sending ESP packet (before crypt)
+sending ESP packet (after crypt)
+truncated out (%Zd out of %Zd)
+payload len %d not a multiple of algorithm block size %lu
+peer hasn't a known address yet
+spi %ld: remote address changed from %s to %s
+received update probe from peer
+can't open pidfile %s for writing
+Warning, could not fork the child process!
+VPNC started in background (pid: %d)...
+%s: %02x
+%s: %04x
+%s: %08x
+%s:%c
+%02x
+default value for this option
+10000
+commandline option,
+configfile variable, 
+argument type
+description
+--gateway
+IPSec gateway 
+<ip/hostname>
+IP/name of your IPSec gateway
+--id
+IPSec ID 
+<ASCII string>
+your group name
+IPSec secret 
+--username
+Xauth username 
+your username
+Xauth password 
+--udp
+UDP Encapsulate
+--domain
+Domain 
+--xauth-inter
+Xauth interactive
+--script
+Config Script 
+<command>
+--dh
+IKE DH Group 
+<dh1/dh2/dh5>
+name of the IKE DH Group
+--pfs
+Perfect Forward Secrecy 
+<nopfs/dh1/dh2/dh5/server>
+--enable-1des
+Enable Single DES
+--application-version
+Application version 
+Application Version to report
+--ifname
+Interface name 
+--debug
+Debug 
+<0/1/2/3/99>
+Show verbose debug messages
+--no-detach
+No Detach
+--pid-file
+Pidfile 
+<filename>
+--local-port
+Local Port 
+<0-65535>
+--udp-port
+UDP Encapsulation Port 
+--disable-natt
+Disable NAT Traversal
+disable use of NAT-T
+--non-inter
+Noninteractive
+couldn't open `%s'
+reading `%s'
+can't allocate memory
+%s%.*s
+Legend:
+(configfile only option)
+  %s %s
+  %s%s
+      
+    Default: %s
+Supported DH-Groups:
+Supported Hash-Methods:
+Supported Encryptions:
+--version
+--print-config
+--help
+--long-help
+%s: unknown option %s
+/etc/vpnc/default.conf
+/etc/vpnc.conf
+Enter IPSec gateway address: 
+Enter IPSec ID for %s: 
+Enter username for %s: 
+Enter password for %s@%s: 
+vpnc.conf:
+missing IPSec gatway address
+missing IPSec ID
+missing IPSec secret
+missing Xauth username
+missing Xauth password
+Cisco Systems VPN Client %s:%s
+your group password (cleartext, no support for obfuscated strings)
+your password (cleartext, no support for obfuscated strings)
+Use Cisco-UDP encapsulation of IPSEC traffic
+(NT-) Domain name for authentication
+enable interactive extended authentication (for challange response auth)
+command is executed using system() to configure the interface,
+routing and so on. Device name, IP, etc. are passed using enviroment
+variables, see README. This script is executed right after ISAKMP is
+done, but befor tunneling is enabled.
+Diffie-Hellman group to use for PFS
+enables weak single DES encryption
+visible name of the TUN interface
+Don't detach from the console after login
+store the pid of background process in <filename>
+local ISAKMP port number to use (0 == use random port)
+local UDP port number to use (0 == use random port)
+Don't ask anything, exit on missing options
+warning: unknown configuration directive in %s at line %d
+Usage: %s [--version] [--print-config] [--help] [--long-help] [options] [config file]
+Report bugs to [email protected]
+Copyright (C) 2002-2004 Geoffrey Keating, Maurice Massar
+vpnc comes with NO WARRANTY, to the extent permitted by law.
+You may redistribute copies of vpnc under the terms of the GNU General
+Public License.  For more information about these matters, see the files
+named COPYING.
+WARNING! active debug level is >= 99, output includes username and password (hex encoded)
+WARNING! active debug level is >= 99, output includes username and password (hex encoded)
+Enter IPSec secret for %s@%s: 
+IKE DH Group "%s" unsupported
+Perfect Forward Secrecy "%s" unsupported
+IKE DH Group must not be nopfs
+/dev/net/tun
+can't open /dev/net/tun, check that it is either device char 10 200 or (with DevFS) a symlink to ../misc/net/tun (not misc/net/tun)
+ifconfig $TUNDEV inet $INTERNAL_IP4_ADDRESS pointopoint $INTERNAL_IP4_ADDRESS netmask 255.255.255.255 mtu 1412 up
+FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A63A3620FFFFFFFFFFFFFFFF
+FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE65381FFFFFFFFFFFFFFFF
+FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3DC2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F83655D23DCA3AD961C62F356208552BB9ED529077096966D670C354E4ABC9804F1746C08CA237327FFFFFFFFFFFFFFFF
+id <= (int)(sizeof(groups) / sizeof(groups[0]))
+group_init
+math_group.c
+groups[i].type == MODP
+group_get
+id >= 1
+clone->type == MODP
+group_free
+grp->type == MODP
+modp_clone
+new_grp
+modp_init