Do rename qt=>tqt on source files, directories and libraries.

Rename pyuic=>pytquic, pylupdate=>pytqlupdate.
Do rename qt=>tqt on constants and variables.
Do rename QT=>TQT on constants.

Signed-off-by: Slávek Banko <[email protected]>

1 files changed, 0 insertions, 5807 deletions

diff --git a/doc/PyQt.sgml b/doc/PyQt.sgml
deleted file mode 100644
index 3eece7e..0000000
--- a/doc/PyQt.sgml
+++ /dev/null
@@ -1,5807 +0,0 @@
-<!DOCTYPE Article PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
-<Article>
-<ArtHeader>
-	<Title>Python Bindings for TQt (3.18.1)</Title>
-	<Author>
-		<FirstName>Phil</FirstName>
-		<Surname>Thompson</Surname>
-	</Author>
-	<Abstract>
-	<Para>
-	This document describes a set of Python bindings for the TQt widget set.
-	Contact the author at <Email>[email protected]</Email>.
-	</Para>
-	</Abstract>
-</ArtHeader>
-
-
-<Sect1><Title>Introduction</Title>
-<Para>
-PyTQt is a set of Python bindings for the TQt toolkit and available for all
-platforms supported by TQt, including Windows, Linux, UNIX, MacOS/X and embedded
-systems such as the Sharp Zaurus and the Compaq iPAQ.  They have been tested
-against TQt versions 1.43 to 3.3.6, TQt Non-commercial, TQtopia 1.5.0, and Python
-versions 1.5 to 2.4.2.  TQt/Embedded v3 is not supported.  TQt v4 is supported
-by PyTQt v4.
-</Para>
-
-<Para>
-PyTQt is available under the GPL license for use with the GPL version of TQt, a
-a commercial license for use with the commercial version of TQt, a
-non-commercial license for use with the non-commercial version of TQt v2, and an
-educational license for use with the educational version of TQt.
-</Para>
-
-<Para>
-There is also an evaluation version of PyTQt for Windows.  This must be used
-with the corresponding evaluation version of TQt.
-</Para>
-
-<Para>
-PyTQt is built using SIP (a tool for generating Python extension modules for
-C++ class libraries).  SIP v4.6 or later must be installed in order to build
-and run this version of PyTQt.
-</Para>
-
-<Para>
-PyTQt for MacOS/X requires TQt v3.1.0 or later and Python v2.3 or later.
-</Para>
-
-<Para>
-The bindings are implemented as a number of Python modules
-</Para>
-
-<ItemizedList>
-<ListItem>
-<Para>
-<Literal>qt</Literal> is the main module and contains the core classes and most
-user interface widgets.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtaxcontainer</Literal> contains a sub-set of the classes implemented
-in TQt's TQAxContainer module, part of TQt's ActiveTQt framework.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtcanvas</Literal> contains the classes implemented in TQt's Canvas
-module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtgl</Literal> contains the classes implemented in TQt's OpenGL module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtnetwork</Literal> contains the classes implemented in TQt's Network
-module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtpe</Literal> contains the classes implemented in TQtopia (originally
-called the TQt Palmtop Environment).  It is only supported with TQt/Embedded.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtsql</Literal> contains the classes implemented in TQt's SQL module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qttable</Literal> contains the classes implemented in TQt's Table
-module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtui</Literal> contains the classes implemented in TQt's tqui library.
-These allow GUIs to be created directly from TQt Designer's
-<Literal>.ui</Literal> files.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtxml</Literal> contains the classes implemented in TQt's XML module.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>qtext</Literal> contains useful third-party classes that are not part
-of TQt.  At the moment it contains bindings for TQScintilla, the port to TQt of
-the Scintilla programmer's editor class.
-</Para>
-</ListItem>
-</ItemizedList>
-
-<Para>
-PyTQt also includes the <Literal>pyuic</Literal> and
-<Literal>pylupdate</Literal> utilities which correspond to the TQt
-<Literal>uic</Literal> and <Literal>lupdate</Literal> utilities.
-<Literal>pyuic</Literal> converts the GUI designs created with TQt Designer to
-executable Python code.  <Literal>pylupdate</Literal> scans Python code,
-extracts all strings that are candidates for internationalisation, and creates
-an XML file for use by TQt Linguist.
-</Para>
-
-<Sect2><Title>Changes</Title>
-<Para>
-The changes visible to the Python programmer in this release are as follows.
-</Para>
-<ItemizedList>
-
-<ListItem>
-<Para>
-This version requires SIP v4.4 (or later).
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-Concatenating Python strings and <Literal>TQString</Literal>s is now supported.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>TQString</Literal> now supports the <Literal>*</Literal> and
-<Literal>*=</Literal> operators that behave as they do for Python strings.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>TQString</Literal> is more interoperable with Python string and unicode
-objects.  For example they can be passed as arguments to
-<Literal>open()</Literal> and to most (but not all) string methods.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>TQPopupMenu</Literal> (and sub-classes) instances now transfer
-ownership of the menu to Python in the call to <Literal>exec_loop()</Literal>.
-This means the menu's resources are all released when the Python wrapper is
-garbage collected without needing to call
-<Literal>TQObject.deleteLater()</Literal>.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>TQObject.sender()</Literal> now handles Python signals.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-The missing <Literal>MacintoshVersion</Literal> enum has been added.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-<Literal>PYQT_BUILD</Literal> has been removed.
-</Para>
-</ListItem>
-
-<ListItem>
-<Para>
-The convention for converting between a C/C++ null pointer and Python's
-<Literal>None</Literal> object has now been universally applied.  In previous
-versions a null pointer to, for example, a TQt list container would often be
-converted to an empty list rather than <Literal>None</Literal>.
-</Para>
-</ListItem>
-
-</ItemizedList>
-</Sect2>
-</Sect1>
-
-
-<Sect1><Title>Other PyTQt Goodies</Title>
-<Sect2><Title>Using TQt Designer</Title>
-<Para>
-TQt Designer is a GPL'ed GUI design editor provided by Trolltech as part of TQt.
-It generates an XML description of a GUI design. TQt includes
-<Literal>uic</Literal> which generates C++ code from that XML.
-</Para>
-
-<Para>
-PyTQt includes <Literal>pyuic</Literal> which generates Python code from the
-same XML. The Python code is self contained and can be executed immediately.
-</Para>
-
-<Para>
-It is sometimes useful to be able to include some specific Python code in the
-output generated by <Literal>pyuic</Literal>. For example, if you are using
-custom widgets, <Literal>pyuic</Literal> has no way of knowing the name of the
-Python module containing the widget and so cannot generate the required
-<Literal>import</Literal> statement. To help get around this,
-<Literal>pyuic</Literal> will extract any lines entered in the
-<Literal>Comment</Literal> field of TQt Designer's
-<Literal>Form Settings</Literal> dialog that begin with
-<Literal>Python:</Literal> and copies them to the generated output.
-</Para>
-
-<Para>
-Here's a simple example showing the contents of the <Literal>Comment</Literal>
-field.
-</Para>
-
-<ProgramListing>
-This comment will be ignored by pyuic.
-Python:
-Python:# Import our custom widget.
-Python:from foo import bar
-</ProgramListing>
-
-<Para>
-Here's the corresponding output from <Literal>pyuic</Literal>.
-</Para>
-
-<ProgramListing>
-from PyTQt.qt import *
-
-# Import our custom widget.
-from foo import bar
-</ProgramListing>
-
-<Para>
-Thanks to Christian Bird, <Literal>pyuic</Literal> will extract Python code
-entered using TQt Designer to implement slots. In TQt Designer, when you need to
-edit a slot and the source editor appears, enter Python code between the curly
-braces. Don't worry about the correct starting indent level, each line is
-prepended with a correct indentation.
-</Para>
-
-<Para>
-Make sure that the <Literal>ui.h</Literal> file is in the same directory as the
-<Literal>.ui</Literal> file when using <Literal>pyuic</Literal>. The
-<Literal>.ui</Literal> file implies the name of the <Literal>.ui.h</Literal>
-file so there is no need to specify it on the command line.
-</Para>
-
-<Para>
-Here's an example of a simple slot.  
-</Para>
-
-<ProgramListing>
-void DebMainWindowFrm::browsePushButtonClicked()
-{
-if self.debugging:
-    TQMessageBox.critical(self, "Event", "browse pushbutton was clicked!")
-}
-</ProgramListing>
-
-<Para>
-Here is the resulting code when <Literal>pyuic</Literal> is run.
-</Para>
-
-<ProgramListing>
-class DebMainWindowFrm(TQMainWindow):
-    ...stuff...
-    def browsePushButtonClicked(self):
-        if self.debugging:
-            TQMessageBox.critical(self, "Event", "browse pushbutton was clicked!")
-</ProgramListing>
-
-<Para>
-Note that indenting is as normal and that <Literal>self</Literal> and all other
-parameters passed to the slot are available.
-</Para>
-
-<Para>
-If you use this, you will need to turn off all of the fancy options for the C++ 
-editor in Designer as it tries to force C++ syntax and that's naturally
-annoying when trying to code in Python.
-</Para>
-</Sect2>
-
-<Sect2><Title>Using TQt Linguist</Title>
-<Para>
-TQt includes the <Literal>lupdate</Literal> program which parses C++ source
-files converting calls to the <Literal>QT_TR_NOOP()</Literal> and
-<Literal>QT_TRANSLATE_NOOP()</Literal> macros to <Literal>.ts</Literal>
-language source files.  The <Literal>lrelease</Literal> program is then used to
-generate <Literal>.qm</Literal> binary language files that are distributed with
-your application.
-</Para>
-
-<Para>
-Thanks to Detlev Offenbach, PyTQt includes the <Literal>pylupdate</Literal>
-program.  This generates the same <Literal>.ts</Literal> language source files
-from your PyTQt source files.
-</Para>
-</Sect2>
-</Sect1>
-
-
-<Sect1><Title>Deploying Commercial PyTQt Applications</Title>
-<Para>
-When deploying commercial PyTQt applications it is necessary to discourage users
-from accessing the underlying PyTQt modules for themselves.  A user that used
-the modules shipped with your application to develop new applications would
-themselves be considered a developer and would need their own commercial TQt and
-PyTQt licenses.
-</Para>
-
-<Para>
-One solution to this problem is the
-<ULink url="http://www.riverbankcomputing.co.uk/vendorid/">VendorID</ULink>
-package.  This allows you to build Python extension modules that can only be
-imported by a digitally signed custom interpreter.  The package enables you to
-create such an interpreter with your application embedded within it.  The
-result is an interpreter that can only run your application, and PyTQt modules
-that can only be imported by that interpreter.  You can use the package to
-similarly restrict access to any extension module.
-</Para>
-
-<Para>
-In order to build PyTQt with support for the VendorID package, pass the
-<Literal>-i</Literal> command line flag to <Literal>configure.py</Literal>.
-</Para>
-</Sect1>
-
-<Sect1><Title><Literal>pyqtconfig</Literal> and Build System Support</Title>
-<Para>
-The SIP build system (ie. the <Literal>sipconfig</Literal> module) is described
-in the SIP documentation.  PyTQt includes the <Literal>pyqtconfig</Literal>
-module that can be used by configuration scripts of other bindings that are
-built on top of PyTQt.
-</Para>
-
-<Para>
-The <Literal>pyqtconfig</Literal> module contains the following classes:
-</Para>
-
-<VariableList>
-<VarListEntry>
-<Term><Literal>Configuration(sipconfig.Configuration)</Literal></Term>
-<ListItem>
-<Para>
-This class encapsulates additional configuration values, specific to PyTQt, that
-can be accessed as instance variables.
-</Para>
-
-<Para>
-The following configuration values are provided (in addition to those provided
-by the <Literal>sipconfig.Configuration</Literal> class):
-</Para>
-<VariableList>
-
-<VarListEntry>
-<Term><Literal>pyqt_bin_dir</Literal></Term>
-<ListItem>
-<Para>
-The name of the directory containing the <Literal>pyuic</Literal> and
-<Literal>pylupdate</Literal> executables.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_config_args</Literal></Term>
-<ListItem>
-<Para>
-The command line passed to <Literal>configure.py</Literal> when PyTQt was
-configured.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_mod_dir</Literal></Term>
-<ListItem>
-<Para>
-The name of the directory containing the PyTQt modules.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_modules</Literal></Term>
-<ListItem>
-<Para>
-A string containing the names of the PyTQt modules that were installed.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qt_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qt</Literal> module and which should be added to those needed by any
-module that imports the <Literal>qt</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtaxcontainer_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtaxcontainer</Literal> module and which should be added to those
-needed by any module that imports the <Literal>qtaxcontainer</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtcanvas_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtcanvas</Literal> module and which should be added to those needed by
-any module that imports the <Literal>qtcanvas</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtext_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtext</Literal> module and which should be added to those needed by
-any module that imports the <Literal>qtext</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtgl_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtgl</Literal> module and which should be added to those needed by any
-module that imports the <Literal>qtgl</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtnetwork_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtnetwork</Literal> module and which should be added to those needed
-by any module that imports the <Literal>qtnetwork</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtsql_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtsql</Literal> module and which should be added to those needed by
-any module that imports the <Literal>qtsql</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qttable_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qttable</Literal> module and which should be added to those needed by
-any module that imports the <Literal>qttable</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtui_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtui</Literal> module and which should be added to those needed by any
-module that imports the <Literal>qtui</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_qtxml_sip_flags</Literal></Term>
-<ListItem>
-<Para>
-A string of the SIP flags used to generate the code for the
-<Literal>qtxml</Literal> module and which should be added to those needed by
-any module that imports the <Literal>qtxml</Literal> module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_sip_dir</Literal></Term>
-<ListItem>
-<Para>
-The name of the base directory where the <Literal>.sip</Literal> files for each
-of the PyTQt modules is installed. A sub-directory exists with the same name as
-the module.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_version</Literal></Term>
-<ListItem>
-<Para>
-The PyTQt version as a 3 part hexadecimal number (eg. v3.10 is represented as
-<Literal>0x030a00</Literal>).
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>pyqt_version_str</Literal></Term>
-<ListItem>
-<Para>
-The PyTQt version as a string. For development snapshots it will start with
-<Literal>snapshot-</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtModuleMakefile(sipconfig.SIPModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qt</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtAxContainerModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtaxcontainer</Literal>
-module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtCanvasModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtcanvas</Literal>
-module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtExtModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtext</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtGLModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtgl</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtNetworkModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtnetwork</Literal>
-module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtTableModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qttable</Literal>
-module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtSQLModuleMakefile(TQtTableModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtsql</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtUIModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtui</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-<VarListEntry>
-<Term><Literal>TQtXMLModuleMakefile(TQtModuleMakefile)</Literal></Term>
-<ListItem>
-<Para>
-The Makefile class for modules that import the <Literal>qtxml</Literal> module.
-</Para>
-<VariableList>
-<VarListEntry>
-<Term><Literal>finalise(self)</Literal></Term>
-<ListItem>
-<Para>
-This is a reimplementation of <Literal>sipconfig.Makefile.finalise()</Literal>.
-</Para>
-<Para></Para><Para></Para>
-</ListItem>
-</VarListEntry>
-</VariableList>
-</ListItem>
-</VarListEntry>
-
-</VariableList>
-</Sect1>
-<Sect1><Title>Things to be Aware Of</Title>
-<Sect2><Title>super and Wrapped Classes</Title>
-<Para>
-Internally PyTQt implements a lazy technique for attribute lookup where
-attributes are only placed in type and instance dictionaries when they are
-first referenced.  This technique is needed to reduce the time taken to import
-large modules such as PyTQt.
-</Para>
-
-<Para>
-In most circumstances this technique is transparent to an application.  The
-exception is when <Literal>super</Literal> is used with a PyTQt class.  The way
-that <Literal>super</Literal> is currently implemented means that the lazy
-lookup is bypassed resulting in <Literal>AttributeError</Literal> exceptions
-unless the attribute has been previously referenced.
-</Para>
-
-<Para>
-Note that this restriction applies to any class wrapped by SIP and not just
-PyTQt.
-</Para>
-</Sect2>
-
-
-<Sect2><Title>Python Strings, TQt Strings and Unicode</Title>
-<Para>
-Unicode support was added to TQt in v2.0 and to Python in v1.6.  In TQt, Unicode
-support is implemented using the <Literal>TQString</Literal> class.  It is
-important to understand that <Literal>TQString</Literal>s, Python string objects
-and Python Unicode objects are all different but conversions between them are
-automatic in almost all cases and easy to achieve manually when needed.
-</Para>
-
-<Para>
-Whenever PyTQt expects a <Literal>TQString</Literal> as a function argument, a
-Python string object or a Python Unicode object can be provided instead, and
-PyTQt will do the necessary conversion automatically.
-</Para>
-
-<Para>
-You may also manually convert Python string and Unicode objects to
-<Literal>TQString</Literal>s by using the <Literal>TQString</Literal> constructor
-as demonstrated in the following code fragment.
-</Para>
-
-<ProgramListing>
-qs1 = TQString('Converted Python string object')
-qs2 = TQString(u'Converted Python Unicode object')
-</ProgramListing>
-
-<Para>
-In order to convert a <Literal>TQString</Literal> to a Python string object use
-the Python <Literal>str()</Literal> function.  Applying
-<Literal>str()</Literal> to a null <Literal>TQString</Literal> and an empty
-<Literal>TQString</Literal> both result in an empty Python string object.
-</Para>
-
-<Para>
-In order to convert a <Literal>TQString</Literal> to a Python Unicode object use
-the Python <Literal>unicode()</Literal> function.  Applying
-<Literal>unicode()</Literal> to a null <Literal>TQString</Literal> and an empty
-<Literal>TQString</Literal> both result in an empty Python Unicode object.
-</Para>
-</Sect2>
-
-<Sect2><Title>Access to Protected Member Functions</Title>
-<Para>
-When an instance of a C++ class is not created from Python it is not possible
-to access the protected member functions, or emit the signals, of that
-instance.  Attempts to do so will raise a Python exception.  Also, any Python
-methods corresponding to the instance's virtual member functions will never be
-called.
-</Para>
-</Sect2>
-
-<Sect2><Title><Literal>None</Literal> and <Literal>NULL</Literal></Title>
-<Para>
-Throughout the bindings, the <Literal>None</Literal> value can be specified
-wherever <Literal>NULL</Literal> is acceptable to the underlying C++ code.
-</Para>
-
-<Para>
-Equally, <Literal>NULL</Literal> is converted to <Literal>None</Literal>
-whenever it is returned by the underlying C++ code.
-</Para>
-</Sect2>
-
-
-<Sect2><Title>Support for C++ <Literal>void *</Literal> Data Types</Title>
-<Para>
-PyTQt represents <Literal>void *</Literal> values as objects of type
-<Literal>sip.voidptr</Literal>. Such values are often used to pass the
-addresses of external objects between different Python modules. To make this
-easier, a Python integer (or anything that Python can convert to an integer)
-can be used whenever a <Literal>sip.voidptr</Literal> is expected.
-</Para>
-<Para>
-A <Literal>sip.voidptr</Literal> may be converted to a Python integer by using
-the <Literal>int()</Literal> builtin function.
-</Para>
-<Para>
-A <Literal>sip.voidptr</Literal> may be converted to a Python string by using
-its <Literal>asstring()</Literal> method. The <Literal>asstring()</Literal>
-method takes an integer argument which is the length of the data in bytes.
-</Para>
-</Sect2>
-
-
-<Sect2><Title>Support for Threads</Title>
-<Para>
-PyTQt implements the full set of TQt's thread classes.  Python, of course, also
-has its own thread extension modules.  If you are using SIP v4 (or later) and
-Python v2.3.5 (or later) then PyTQt does not impose any additional restrictions.
-(Read the relevant part of the TQt documentation to understand the restrictions
-imposed by the TQt API.)
-</Para>
-<Para>
-If you are using earlier versions of either SIP or Python then it is possible
-to use either of the APIs so long as you follow some simple rules.
-</Para>
-<ItemizedList>
-<ListItem>
-<Para>
-If you use the TQt API then the very first <Literal>import</Literal> of one of
-the PyTQt modules must be done from the main thread.
-</Para>
-</ListItem>
-<ListItem>
-<Para>
-If you use the Python API then all calls to PyTQt (including any
-<Literal>import</Literal>s) must be done from one thread only.  Therefore, if
-you want to make calls to PyTQt from several threads then you must use the TQt
-API.
-</Para>
-</ListItem>
-<ListItem>
-<Para>
-If you want to use both APIs in the same application then all calls to PyTQt
-must be done from threads created using the TQt API.
-</Para>
-</ListItem>
-</ItemizedList>
-<Para>
-The above comments actually apply to any SIP generated module, not just PyTQt.
-</Para>
-</Sect2>
-
-<Sect2><Title>Garbage Collection</Title>
-<Para>
-C++ does not garbage collect unreferenced class instances, whereas Python does.
-In the following C++ fragment both colours exist even though the first can no
-longer be referenced from within the program:
-</Para>
-
-<ProgramListing>
-c = new TQColor();
-c = new TQColor();
-</ProgramListing>
-
-<Para>
-In the corresponding Python fragment, the first colour is destroyed when
-the second is assigned to <Literal>c</Literal>:
-</Para>
-
-<ProgramListing>
-c = TQColor()
-c = TQColor()
-</ProgramListing>
-
-<Para>
-In Python, each colour must be assigned to different names.  Typically this
-is done within class definitions, so the code fragment would be something like:
-</Para>
-
-<ProgramListing>
-self.c1 = TQColor()
-self.c2 = TQColor()
-</ProgramListing>
-
-<Para>
-Sometimes a TQt class instance will maintain a pointer to another instance and
-will eventually call the destructor of that second instance. The most common
-example is that a <Literal>TQObject</Literal> (and any of its sub-classes) keeps
-pointers to its children and will automatically call their destructors. In
-these cases, the corresponding Python object will also keep a reference to the
-corresponding child objects.
-</Para>
-
-<Para>
-So, in the following Python fragment, the first <Literal>TQLabel</Literal> is
-not destroyed when the second is assigned to <Literal>l</Literal> because the
-parent <Literal>TQWidget</Literal> still has a reference to it.
-</Para>
-
-<ProgramListing>
-p = TQWidget()
-l = TQLabel('First label',p)
-l = TQLabel('Second label',p)
-</ProgramListing>
-</Sect2>
-
-<Sect2><Title>C++ Variables</Title>
-<Para>
-Access to C++ variables is supported.  They are accessed as Python instance
-variables.  For example:
-</Para>
-
-<ProgramListing>
-tab = TQTab()
-tab.label = "First Tab"
-tab.r = TQRect(10,10,75,30)
-</ProgramListing>
-
-<Para>
-Global variables and static class variables are effectively read-only.  They
-can be assigned to, but the underlying C++ variable will not be changed.  This
-may change in the future.
-</Para>
-
-<Para>
-Access to protected C++ class variables is not supported.  This may change in
-the future.
-</Para>
-</Sect2>
-
-<Sect2><Title>Multiple Inheritance</Title>
-<Para>
-It is not possible to define a new Python class that sub-classes from more than
-one TQt class.
-</Para>
-</Sect2>
-
-<Sect2><Title>i18n Support</Title>
-<Para>
-TQt implements i18n support through the TQt Linguist application, the
-<Literal>TQTranslator</Literal> class, and the
-<Literal>TQApplication::translate()</Literal>, <Literal>TQObject::tr()</Literal>
-and <Literal>TQObject::trUtf8()</Literal> methods.  Usually the
-<Literal>tr()</Literal> method is used to obtain the correct translation of a
-message.  The translation process uses a message context to allow the same
-message to be translated differently.  <Literal>tr()</Literal> is actually
-generated by <Literal>moc</Literal> and uses the hardcoded class name as the
-context.  On the other hand, <Literal>TQApplication::translate()</Literal>
-allows to context to be explicitly stated.
-</Para>
-
-<Para>
-Unfortunately, because of the way TQt implents <Literal>tr()</Literal> (and
-<Literal>trUtf8()</Literal>) it is not possible for PyTQt to exactly reproduce
-its behavour.  The PyTQt implementation of <Literal>tr()</Literal> (and
-<Literal>trUtf8()</Literal>) uses the class name of the instance as the
-context.  The key difference, and the source of potential problems, is that the
-context is determined dynamically in PyTQt, but is hardcoded in TQt. In other
-words, the context of a translation may change depending on an instance's class
-hierarchy.
-</Para>
-
-<ProgramListing>
-class A(TQObject):
-    def __init__(self):
-        TQObject.__init__(self)
-
-    def hello(self):
-        return self.tr("Hello")
-
-class B(A):
-    def __init__(self):
-        A.__init__(self)
-
-a = A()
-a.hello()
-
-b = B()
-b.hello()
-</ProgramListing>
-
-<Para>
-In the above the message is translated by <Literal>a.hello()</Literal> using a
-context of <Literal>A</Literal>, and by <Literal>b.hello()</Literal> using a
-context of <Literal>B</Literal>.  In the equivalent C++ version the context
-would be <Literal>A</Literal> in both cases.
-</Para>
-
-<Para>
-The PyTQt behaviour is unsatisfactory and may be changed in the future.  It is
-recommended that <Literal>TQApplication.translate()</Literal> be used in
-preference to <Literal>tr()</Literal> (and <Literal>trUtf8()</Literal>).  This
-is guaranteed to work with current and future versions of PyTQt and makes it
-much easier to share message files between Python and C++ code.  Below is the
-alternative implementation of <Literal>A</Literal> that uses
-<Literal>TQApplication.translate()</Literal>.
-</Para>
-
-<ProgramListing>
-class A(TQObject):
-    def __init__(self):
-        TQObject.__init__(self)
-
-    def hello(self):
-        return tqApp.translate("A","Hello")
-</ProgramListing>
-
-<Para>
-Note that the code generated by <Literal>pyuic</Literal> uses
-<Literal>TQApplication.translate()</Literal>.
-</Para>
-</Sect2>
-</Sect1>
-
-
-<Sect1><Title>Signal and Slot Support</Title>
-<Para>
-A signal may be either a TQt signal (specified using
-<Literal>SIGNAL()</Literal>) or a Python signal (specified using
-<Literal>PYSIGNAL()</Literal>).
-</Para>
-
-<Para>
-A slot can be either a Python callable object, a TQt signal (specified using
-<Literal>SIGNAL()</Literal>), a Python signal (specified using
-<Literal>PYSIGNAL()</Literal>), or a TQt slot (specified using
-<Literal>SLOT()</Literal>).
-</Para>
-
-<Para>
-You connect signals to slots (and other signals) as you would from C++.  For
-example:
-</Para>
-
-<ProgramListing>
-TQObject.connect(a,SIGNAL("TQtSig()"),pyFunction)
-TQObject.connect(a,SIGNAL("TQtSig()"),pyClass.pyMethod)
-TQObject.connect(a,SIGNAL("TQtSig()"),PYSIGNAL("PySig"))
-TQObject.connect(a,SIGNAL("TQtSig()"),SLOT("TQtSlot()"))
-TQObject.connect(a,PYSIGNAL("PySig"),pyFunction)
-TQObject.connect(a,PYSIGNAL("PySig"),pyClass.pyMethod)
-TQObject.connect(a,PYSIGNAL("PySig"),SIGNAL("TQtSig()"))
-TQObject.connect(a,PYSIGNAL("PySig"),SLOT("TQtSlot()"))
-</ProgramListing>
-
-<Para>
-When a slot is a Python method that corresponds to a TQt slot then a signal can
-be connected to either the Python method or the TQt slot.  The following
-connections achieve the same effect.
-</Para>
-
-<ProgramListing>
-sbar = TQScrollBar()
-lcd = TQLCDNumber()
-
-TQObject.connect(sbar,SIGNAL("valueChanged(int)"),lcd.display)
-TQObject.connect(sbar,SIGNAL("valueChanged(int)"),lcd,SLOT("display(int)"))
-</ProgramListing>
-
-<Para>
-The difference is that the second connection is made at the C++ level and is
-more efficient.
-</Para>
-
-<Para>
-Disconnecting signals works in exactly the same way.
-</Para>
-
-<Para>
-Any instance of a class that is derived from the <Literal>TQObject</Literal>
-class can emit a signal using the <Literal>emit</Literal> method.  This takes
-two arguments.  The first is the Python or TQt signal, the second is a Python
-tuple which are the arguments to the signal.  For example:
-</Para>
-
-<ProgramListing>
-a.emit(SIGNAL("clicked()"),())
-a.emit(PYSIGNAL("pySig"),("Hello","World"))
-</ProgramListing>
-
-<Para>
-Note that when a slot is a Python callable object its reference count is not
-increased.  This means that a class instance can be deleted without having to
-explicitly disconnect any signals connected to its methods.  However, it also
-means that using lambda expressions as slots will not work unless you keep a
-separate reference to the expression to prevent it from being immediately
-garbage collected.
-</Para>
-
-<Para>
-TQt allows a signal to be connected to a slot that requires fewer arguments than
-the signal passes.  The extra arguments are quietly discarded.  Python slots
-can be used in the same way. 
-</Para>
-</Sect1>
-
-
-<Sect1><Title>Static Member Functions</Title>
-<Para>
-Static member functions are implemented as Python class functions.
-For example the C++ static member function
-<Literal>TQObject::connect()</Literal> is called from Python as
-<Literal>TQObject.connect()</Literal> or <Literal>self.connect()</Literal> if
-called from a sub-class of <Literal>TQObject</Literal>.
-</Para>
-</Sect1>
-
-
-<Sect1><Title>Enumerated Types</Title>
-<Para>
-Enumerated types are implemented as a set of simple variables corresponding to
-the separate enumerated values.
-</Para>
-
-<Para>
-When using an enumerated value the name of the class (or a sub-class) in which
-the enumerated type was defined in must be included.  For example:
-</Para>
-
-<ProgramListing>
-TQt.SolidPattern
-TQWidget.TabFocus
-TQFrame.TabFocus
-</ProgramListing>
-</Sect1>
-
-
-<Sect1><Title>Module Reference Documentation</Title>
-<Para>
-The following sections should be used in conjunction with the normal class
-documentation - only the differences specific to the Python bindings are
-documented here.
-</Para>
-
-<Para>
-In these sections, <Emphasis>Not yet implemented</Emphasis>
-implies that the feature can be easily implemented if needed.  <Emphasis>Not
-implemented</Emphasis> implies that the feature will not be implemented, either
-because it cannot be or because it is not appropriate.
-</Para>
-
-<Para>
-If a class is described as being <Emphasis>fully implemented</Emphasis> then
-all non-private member functions and all public class variables have been
-implemented.
-</Para>
-
-<Para>
-If an operator has been implemented then it is stated explicitly.
-</Para>
-
-<Para>
-Classes that are not mentioned have not yet been implemented.
-</Para>
-</Sect1>
-
-
-<Sect1><Title><Literal>qt</Literal> Module Reference</Title>
-<Sect2><Title>TQt Constants</Title>
-<Para>
-All constant values defined by TQt have equivalent constants defined to Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQt (TQt v2+)</Title>
-<Para>
-<Literal>TQt</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQAccel</Title>
-<Para>
-<Literal>TQAccel</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQAction (TQt v2.2+)</Title>
-<Para>
-<Literal>TQAction</Literal> is fully implemented.
-</Para>
-
-</Sect2>
-<Sect2><Title>TQActionGroup (TQt v2.2+)</Title>
-<Para>
-<Literal>TQActionGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQApplication</Title>
-<FuncSynopsis>
-        <FuncDef><Function>TQApplication</Function></FuncDef>
-        <ParamDef>int &amp;<Parameter>argc</Parameter></ParamDef>
-        <ParamDef>char **<Parameter>argv</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes one parameter which is a list of argument strings.  Arguments
-used by TQt are removed from the list.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQApplication</Function></FuncDef>
-        <ParamDef>int &amp;<Parameter>argc</Parameter></ParamDef>
-        <ParamDef>char **<Parameter>argv</Parameter></ParamDef>
-        <ParamDef>bool <Parameter>GUIenabled</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes two parameters, the first of which is a list of argument strings.
-Arguments used by TQt are removed from the list.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQApplication</Function></FuncDef>
-        <ParamDef>int &amp;<Parameter>argc</Parameter></ParamDef>
-        <ParamDef>char **<Parameter>argv</Parameter></ParamDef>
-        <ParamDef>Type <Parameter>type</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes two parameters, the first of which is a list of argument strings.
-Arguments used by TQt are removed from the list. (TQt v2.2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int <Function>exec</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_loop</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQAssistantClient (TQt v3.1+)</Title>
-<Para>
-<Literal>TQAssistantClient</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQBitmap</Title>
-<Para>
-<Literal>TQBitmap</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQBrush</Title>
-<Para>
-<Literal>TQBrush</Literal> is fully implemented, including the Python
-<Literal>==</Literal> and <Literal>!=</Literal> operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQButton</Title>
-<Para>
-<Literal>TQButton</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQButtonGroup</Title>
-<Para>
-<Literal>TQButtonGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQByteArray</Title>
-<Para>
-A Python string can be used whenever a <Literal>TQByteArray</Literal> can be
-used.  A <Literal>TQByteArray</Literal> can be converted to a Python string
-using the Python <Literal>str()</Literal> function.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQByteArray &<Function>assign</Function></FuncDef>
-	<ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>size</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>char &<Function>at</Function></FuncDef>
-	<ParamDef>uint <Parameter>i</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>contains</Function></FuncDef>
-	<ParamDef>const char &<Parameter>d</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>fill</Function></FuncDef>
-	<ParamDef>const char &<Parameter>d</Parameter></ParamDef>
-	<ParamDef>int <Parameter>size</Parameter> = -1</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>find</Function></FuncDef>
-	<ParamDef>const char &<Parameter>d</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>i</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>resetRawData</Function></FuncDef>
-	<ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>uint<Parameter>size</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQByteArray &<Function>setRawData</Function></FuncDef>
-	<ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>uint<Parameter>size</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQCDEStyle (TQt v2+)</Title>
-<Para>
-<Literal>TQCDEStyle</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQCheckBox</Title>
-<Para>
-<Literal>TQCheckBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQClipboard</Title>
-<FuncSynopsis>
-        <FuncDef>void *<Function>data</Function> const</FuncDef>
-        <ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented (TQt v1.x).
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>setData</Function></FuncDef>
-        <ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-        <ParamDef>void *<Parameter></Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented (TQt v1.x).
-</Para>
-</Sect2>
-<Sect2><Title>TQColor</Title>
-<Para>
-The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are
-supported.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>getHsv</Function></FuncDef>
-	<ParamDef>int *<Parameter>h</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>s</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>v</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the <Literal>h</Literal>,
-<Literal>s</Literal> and <Literal>v</Literal> values as a tuple.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>getRgb</Function></FuncDef>
-	<ParamDef>int *<Parameter>r</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>g</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>b</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the <Literal>r</Literal>,
-<Literal>g</Literal> and <Literal>b</Literal> values as a tuple.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>hsv</Function></FuncDef>
-	<ParamDef>int *<Parameter>h</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>s</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>v</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the <Literal>h</Literal>,
-<Literal>s</Literal> and <Literal>v</Literal> values as a tuple.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>rgb</Function></FuncDef>
-	<ParamDef>int *<Parameter>r</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>g</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>b</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the <Literal>r</Literal>,
-<Literal>g</Literal> and <Literal>b</Literal> values as a tuple.
-</Para>
-</Sect2>
-<Sect2><Title>TQColorDialog (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>static TQRgb <Function>getRgba</Function></FuncDef>
-	<ParamDef>TQRgb <Parameter>initial</Parameter></ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter></ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>initial</Literal>, <Literal>parent</Literal> and
-<Literal>name</Literal> parameters and returns a tuple containing the
-<Literal>TQRgb</Literal> result and the <Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQColorGroup</Title>
-<Para>
-<Literal>TQColorGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQComboBox</Title>
-<Para>
-<Literal>TQComboBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQCommonStyle (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>getButtonShift</Function></FuncDef>
-	<ParamDef>int &amp;<Parameter>x</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>x</Literal> and
-<Literal>y</Literal> values.  (TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>tabbarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>t</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>hframe</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>vframe</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>overlap</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>t</Literal> parameter and returns a tuple of the
-<Literal>hframe</Literal>, <Literal>vframe</Literal> and
-<Literal>overlap</Literal> values.  (TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQCString (TQt v2+)</Title>
-<Para>
-A Python string can be used whenever a <Literal>TQCString</Literal> can be used.
-A <Literal>TQCString</Literal> can be converted to a Python string using the
-Python <Literal>str()</Literal> function.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQCString &amp;<Function>sprintf</Function></FuncDef>
-	<ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-	<ParamDef>...</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>short <Function>toShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>short</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>ushort <Function>toUShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ushort</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>toInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>int</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>uint <Function>toUInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>uint</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>long <Function>toLong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>long</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>ulong <Function>toULong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ulong</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>float <Function>toFloat</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>float</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>double <Function>toDouble</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>double</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQCursor</Title>
-<Para>
-<Literal>TQCursor</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDataStream</Title>
-<FuncSynopsis>
-	<FuncDef>TQDataStream &amp;<Function>readBytes</Function></FuncDef>
-	<ParamDef>const char *&amp;<Parameter>s</Parameter></ParamDef>
-	<ParamDef>uint &amp;<Parameter>l</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters.  The <Literal>TQDataStream</Literal> result and the
-data read are returned as a tuple.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQDataStream &amp;<Function>readRawBytes</Function></FuncDef>
-	<ParamDef>const char *<Parameter>s</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>l</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>l</Literal> parameter.  The
-<Literal>TQDataStream</Literal> result and the data read are returned as a
-tuple.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQDataStream &amp;<Function>writeBytes</Function></FuncDef>
-	<ParamDef>const char *<Parameter>s</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>s</Literal> and not passed as a
-parameter.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQDataStream &amp;<Function>writeRawBytes</Function></FuncDef>
-	<ParamDef>const char *<Parameter>s</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>s</Literal> and not passed as a
-parameter.
-</Para>
-</Sect2>
-<Sect2><Title>TQDate</Title>
-<Para>
-The Python
-<Literal>==</Literal>, <Literal>!=</Literal>,
-<Literal>&lt;</Literal>, <Literal>&lt;=</Literal>,
-<Literal>&gt;</Literal>, <Literal>&gt;=</Literal>
-and <Literal>__nonzero__</Literal>
-operators are supported.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>weekNumber</Function></FuncDef>
-	<ParamDef>int *<Parameter>yearNum</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the week number and the year number as a
-tuple. (TQt v3.1+)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDateTime</Title>
-<Para>
-<Literal>TQDateTime</Literal> is fully implemented, including the Python
-<Literal>==</Literal>, <Literal>!=</Literal>,
-<Literal>&lt;</Literal>, <Literal>&lt;=</Literal>,
-<Literal>&gt;</Literal>, <Literal>&gt;=</Literal>
-and <Literal>__nonzero__</Literal>
-operators.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTime</Title>
-<Para>
-<Literal>TQTime</Literal> is fully implemented, including the Python
-<Literal>==</Literal>, <Literal>!=</Literal>,
-<Literal>&lt;</Literal>, <Literal>&lt;=</Literal>,
-<Literal>&gt;</Literal>, <Literal>&gt;=</Literal>
-and <Literal>__nonzero__</Literal>
-operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQDateEdit (TQt v3+)</Title>
-<Para>
-<Literal>TQDateEdit</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTimeEdit (TQt v3+)</Title>
-<Para>
-<Literal>TQTimeEdit</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDateTimeEdit (TQt v3+)</Title>
-<Para>
-<Literal>TQDateTimeEdit</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDesktopWidget (TQt v3+)</Title>
-<Para>
-<Literal>TQDesktopWidget</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDial (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDial</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDialog</Title>
-<FuncSynopsis>
-        <FuncDef>int <Function>exec</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_loop</Literal> in Python.
-</Para>
-<Para>
-This method also causes ownership of the underlying C++ dialog to be transfered
-to Python.  This means that the C++ dialog will be deleted when the Python
-wrapper is garbage collected.  Although this is a little inconsistent, it
-ensures that the dialog is deleted without having to explicity code it using
-<Literal>TQObject.deleteLater()</Literal> or other techniques.
-</Para>
-</Sect2>
-<Sect2><Title>TQDir</Title>
-<Para>
-<Literal>TQDir</Literal> is fully implemented, including the Python
-<Literal>len</Literal>, <Literal>[]</Literal> (for reading slices and
-individual elements), <Literal>==</Literal>, <Literal>!=</Literal> and
-<Literal>in</Literal> operators
-</Para>
-</Sect2>
-
-<Sect2><Title>TQFileInfoList</Title>
-<Para>
-This class isn't implemented.  Whenever a <Literal>TQFileInfoList</Literal> is
-the return type of a function or the type of an argument, a Python list of
-<Literal>TQFileInfo</Literal> instances is used instead.
-</Para>
-</Sect2>
-<Sect2><Title>TQDockArea (TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef>bool <Function>hasDockWindow</Function> const</FuncDef>
-	<ParamDef>TQDockWindow *<Parameter>w</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>index</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>w</Literal> parameter and returns the index of the
-TQDockWIndow or -1 if the TQDockArea does not contain the TQDockWindow.
-</Para>
-</Sect2>
-<Sect2><Title>TQDockWindow (TQt v3+)</Title>
-<Para>
-<Literal>TQDockWindow</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQColorDrag (TQt v2.1+)</Title>
-<Para>
-<Literal>TQColorDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDragObject</Title>
-<Para>
-<Literal>TQDragObject</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQImageDrag</Title>
-<Para>
-<Literal>TQImageDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQStoredDrag</Title>
-<Para>
-<Literal>TQStoredDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTextDrag</Title>
-<Para>
-<Literal>TQTextDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQUriDrag (TQt v2+)</Title>
-<Para>
-<Literal>TQUriDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQUrlDrag (TQt v1.x)</Title>
-<Para>
-<Literal>TQUrlDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDropSite</Title>
-<Para>
-<Literal>TQDropSite</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQErrorMessage (TQt v3+)</Title>
-<Para>
-<Literal>TQErrorMessage</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQEvent</Title>
-<Para>
-<Literal>TQEvent</Literal> is fully implemented.
-</Para>
-<Para>
-Instances of <Literal>TQEvent</Literal>s are automatically converted to the
-correct sub-class.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQChildEvent</Title>
-<Para>
-<Literal>TQChildEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCloseEvent</Title>
-<Para>
-<Literal>TQCloseEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIconDragEvent (TQt v3.3+)</Title>
-<Para>
-<Literal>TQIconDragEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQContextMenuEvent (TQt v3+)</Title>
-<Para>
-<Literal>TQContextMenuEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCustomEvent</Title>
-<Para>
-<Literal>TQCustomEvent</Literal> is fully implemented.  Any Python object can be
-passed as the event data and its reference count is increased.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDragEnterEvent</Title>
-<Para>
-<Literal>TQDragEnterEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDragLeaveEvent</Title>
-<Para>
-<Literal>TQDragLeaveEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDragMoveEvent</Title>
-<Para>
-<Literal>TQDragMoveEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDropEvent</Title>
-<Para>
-<Literal>TQDropEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQFocusEvent</Title>
-<Para>
-<Literal>TQFocusEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQHideEvent</Title>
-<Para>
-<Literal>TQHideEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIMComposeEvent (TQt v3.1+)</Title>
-<Para>
-<Literal>TQIMComposeEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIMEvent (TQt v3+)</Title>
-<Para>
-<Literal>TQIMEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQKeyEvent</Title>
-<Para>
-<Literal>TQKeyEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMouseEvent</Title>
-<Para>
-<Literal>TQMouseEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMoveEvent</Title>
-<Para>
-<Literal>TQMoveEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQPaintEvent</Title>
-<Para>
-<Literal>TQPaintEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQResizeEvent</Title>
-<Para>
-<Literal>TQResizeEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQShowEvent</Title>
-<Para>
-<Literal>TQShowEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTabletEvent (TQt v3+)</Title>
-<Para>
-<Literal>TQTabletEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTimerEvent</Title>
-<Para>
-<Literal>TQTimerEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQWheelEvent (TQt v2+)</Title>
-<Para>
-<Literal>TQWheelEvent</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQEventLoop (TQt v3.1+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual int <Function>exec</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_loop</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQFile</Title>
-<FuncSynopsis>
-        <FuncDef>bool <Function>open</Function></FuncDef>
-        <ParamDef>int <Parameter>m</Parameter></ParamDef>
-        <ParamDef>FILE *<Parameter>f</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>readBlock</Function></FuncDef>
-        <ParamDef>char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>len</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>None</Literal> is returned.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>readLine</Function></FuncDef>
-        <ParamDef>char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>maxlen</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>maxlen</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>None</Literal> is returned.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>static void <Function>setDecodingFunction</Function></FuncDef>
-        <ParamDef>EncoderFn <Parameter>f</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>static void <Function>setEncodingFunction</Function></FuncDef>
-        <ParamDef>EncoderFn <Parameter>f</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>writeBlock</Function></FuncDef>
-        <ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed
-as a parameter.
-</Para>
-</Sect2>
-<Sect2><Title>TQFileDialog</Title>
-<Para>
-<Literal>TQFileDialog</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQFileIconProvider</Title>
-<Para>
-<Literal>TQFileIconProvider</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQFilePreview</Title>
-<Para>
-<Literal>TQFilePreview</Literal> is fully implemented.  However it cannot be
-used from Python in the same way as it is used from C++ because PyTQt does not
-support multiple inheritance involving more than one wrapped class.  A trick
-that seems to work is to use composition rather than inheritance as in the
-following code fragment.
-</Para>
-<ProgramListing>
-class FilePreview(TQFilePreview):
-    pass
-
-class Preview(TQLabel):
-    def __init__(self, parent=None):
-        TQLabel.__init__(self, parent)
-        self.preview = FilePreview()
-        self.preview.previewUrl = self.previewUrl
-</ProgramListing>
-<Para>
-Note that TQFilePreview cannot be instantiated directly because it is abstract.
-Thanks to Hans-Peter Jansen for this trick.
-</Para>
-</Sect2>
-<Sect2><Title>TQFileInfo</Title>
-<Para>
-<Literal>TQFileInfo</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQFont</Title>
-<Para>
-<Literal>TQFont</Literal> is fully implemented, including the Python
-<Literal>==</Literal> and <Literal>!=</Literal> operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQFontDatabase (TQt v2.1+)</Title>
-<Para>
-<Literal>TQFontDatabase</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQFontDialog (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>static TQFont <Function>getFont</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter></ParamDef>
-	<ParamDef>const TQFont &<Parameter>def</Parameter></ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>def</Literal>, <Literal>parent</Literal> and
-<Literal>name</Literal> parameters and returns a tuple containing the
-<Literal>TQFont</Literal> result and the <Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static TQFont <Function>getFont</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter></ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>parent</Literal> and <Literal>name</Literal> parameters
-and returns a tuple containing the <Literal>TQFont</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQFontInfo</Title>
-<Para>
-<Literal>TQFontInfo</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQFontMetrics</Title>
-<FuncSynopsis>
-        <FuncDef>TQRect <Function>boundingRect</Function></FuncDef>
-        <ParamDef>int <Parameter>x</Parameter></ParamDef>
-        <ParamDef>int <Parameter>y</Parameter></ParamDef>
-        <ParamDef>int <Parameter>w</Parameter></ParamDef>
-        <ParamDef>int <Parameter>h</Parameter></ParamDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const TQString &amp;<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>int <Parameter>tabstops</Parameter> = 0</ParamDef>
-        <ParamDef>int *<Parameter>tabarray</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>tabarray</Literal> parameter is a Python list of integers.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQSize <Function>size</Function></FuncDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const TQString &amp;<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>int <Parameter>tabstops</Parameter> = 0</ParamDef>
-        <ParamDef>int *<Parameter>tabarray</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>tabarray</Literal> parameter is a Python list of integers.
-</Para>
-</Sect2>
-<Sect2><Title>TQFrame</Title>
-<Para>
-<Literal>TQFrame</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQGManager (TQt v1.x)</Title>
-<Para>
-<Literal>TQGManager</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQChain (TQt v1.x)</Title>
-<Para>
-<Literal>TQChain</Literal> is implemented as an opaque class.
-</Para>
-</Sect2>
-<Sect2><Title>TQGrid (TQt v2+)</Title>
-<Para>
-<Literal>TQGrid</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQGridView (TQt v3+)</Title>
-<Para>
-<Literal>TQGridView</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQGroupBox</Title>
-<Para>
-<Literal>TQGroupBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQHBox (TQt v2+)</Title>
-<Para>
-<Literal>TQHBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQHButtonGroup (TQt v2+)</Title>
-<Para>
-<Literal>TQHButtonGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQHeader</Title>
-<Para>
-<Literal>TQHeader</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQHGroupBox (TQt v2+)</Title>
-<Para>
-<Literal>TQHGroupBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQIconSet</Title>
-<Para>
-<Literal>TQIconSet</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIconFactory (TQt v3.1+)</Title>
-<Para>
-<Literal>TQIconFactory</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQIconView (TQt v2.1+)</Title>
-<FuncSynopsis>
-        <FuncDef>TQIconViewItem *<Function>makeRowLayout</Function></FuncDef>
-        <ParamDef>TQIconViewItem *<Parameter>begin</Parameter></ParamDef>
-        <ParamDef>int &<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIconViewItem (TQt v2.1+)</Title>
-<Para>
-<Literal>TQIconViewItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIconDrag (TQt v2.1+)</Title>
-<Para>
-<Literal>TQIconDrag</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIconDragItem (TQt v2.1+)</Title>
-<Para>
-<Literal>TQIconDragItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQImage</Title>
-<Para>
-The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are
-supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQImage</Function></FuncDef>
-        <ParamDef>const char *<Parameter>xpm</Parameter>[]</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a list of strings as its parameter.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQImage</Function></FuncDef>
-        <ParamDef>uchar *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>int <Parameter>w</Parameter></ParamDef>
-        <ParamDef>int <Parameter>h</Parameter></ParamDef>
-        <ParamDef>int <Parameter>depth</Parameter></ParamDef>
-        <ParamDef>TQRgb *<Parameter>colorTable</Parameter></ParamDef>
-        <ParamDef>int <Parameter>numColors</Parameter></ParamDef>
-        <ParamDef>Endian <Parameter>bitOrder</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>colorTable</Literal> parameter is a list of TQRgb instances or
-None.  (TQt v2.1+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>uchar *<Function>bits</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-The return value is a <Literal>sip.voidptr</Literal> object which is only
-useful if passed to another Python module.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQRgb *<Function>colorTable</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-The return value is a <Literal>sip.voidptr</Literal> object which is only
-useful if passed to another Python module.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQImage <Function>convertDepthWithPalette</Function></FuncDef>
-        <ParamDef>int</ParamDef>
-        <ParamDef>TQRgb *<Parameter>p</Parameter></ParamDef>
-        <ParamDef>int <Parameter>pc</Parameter></ParamDef>
-        <ParamDef>int <Parameter>cf</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>uchar **<Function>jumpTable</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-The return value is a <Literal>sip.voidptr</Literal> object which is only
-useful if passed to another Python module.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>loadFromData</Function></FuncDef>
-	<ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>format</Parameter> = 0</ParamDef>
-	<ParamDef>ColorMode <Parameter>mode</Parameter> = Auto</ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>buf</Literal> and not passed as
-a parameter.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>uchar *<Function>scanLine</Function></FuncDef>
-        <ParamDef>int <Parameter>i</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The return value is a <Literal>sip.voidptr</Literal> object which is only
-useful if passed to another Python module.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQImageIO</Title>
-<FuncSynopsis>
-	<FuncDef>static void <Function>defineIOHandler</Function></FuncDef>
-	<ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>header</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>flags</Parameter></ParamDef>
-	<ParamDef>image_io_handler <Parameter>read_image</Parameter></ParamDef>
-	<ParamDef>image_io_handler <Parameter>write_image</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQImageTextKeyLang</Title>
-<Para>
-<Literal>TQImageTextKeyLang</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQInputDialog (TQt v2.1+)</Title>
-<FuncSynopsis>
-	<FuncDef>static TQString <Function>getText</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>text</Parameter> = TQString::null</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQString</Literal> result and the <Literal>ok</Literal> flag.
-(TQt v2.1 - v2.3.1)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static TQString <Function>getText</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>TQLineEdit::EchoMode<Parameter>echo</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>text</Parameter> = TQString::null</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQString</Literal> result and the <Literal>ok</Literal> flag.
-(TQt v2.2 - v2.3.1)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static TQString <Function>getText</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>TQLineEdit::EchoMode<Parameter>echo</Parameter> = TQLineEdit::Normal</ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>text</Parameter> = TQString::null</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQString</Literal> result and the <Literal>ok</Literal> flag.
-(TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static int <Function>getInteger</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>int <Parameter>num</Parameter> = 0</ParamDef>
-	<ParamDef>int <Parameter>from</Parameter> = -2147483647</ParamDef>
-	<ParamDef>int <Parameter>to</Parameter> = 2147483647</ParamDef>
-	<ParamDef>int <Parameter>step</Parameter> = 1</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>int</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static double <Function>getDouble</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>double <Parameter>num</Parameter> = 0</ParamDef>
-	<ParamDef>double <Parameter>from</Parameter> = -2147483647</ParamDef>
-	<ParamDef>double <Parameter>to</Parameter> = 2147483647</ParamDef>
-	<ParamDef>int <Parameter>step</Parameter> = 1</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>double</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static TQString <Function>getItem</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>caption</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>label</Parameter></ParamDef>
-	<ParamDef>const TQStringList &<Parameter>list</Parameter></ParamDef>
-	<ParamDef>int <Parameter>current</Parameter> = 0</ParamDef>
-	<ParamDef>bool <Parameter>editable</Parameter> = TRUE</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQString</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-</Sect2>
-<Sect2><Title>TQInterlaceStyle (TQt v2.3.1+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-</Para>
-</Sect2>
-<Sect2><Title>TQIODevice</Title>
-<Para>
-<Literal>TQIODevice</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQKeySequence (TQt v3+)</Title>
-<Para>
-<Literal>TQKeySequence</Literal> is fully implemented including the operators
-<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>TQString()</Literal> and
-<Literal>int()</Literal>.  A <Literal>TQString</Literal> instance or a Python
-integer may be used whenever a <Literal>TQKeySequence</Literal> can be used.
-</Para>
-</Sect2>
-<Sect2><Title>TQLabel</Title>
-<Para>
-<Literal>TQLabel</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLayout</Title>
-<Para>
-<Literal>TQLayout</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQBoxLayout</Title>
-<Para>
-<Literal>TQBoxLayout</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQGLayoutIterator (TQt v2+)</Title>
-<Para>
-<Literal>TQGLayoutIterator</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQGridLayout</Title>
-<FuncSynopsis>
-	<FuncDef>bool <Function>findWidget</Function></FuncDef>
-	<ParamDef>TQWidget *<Parameter>w</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>row</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>col</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>w</Literal> parameter and returns a tuple containing
-the <Literal>bool</Literal> result, <Literal>row</Literal> and
-<Literal>col</Literal>. (TQt v2+)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQHBoxLayout</Title>
-<Para>
-<Literal>TQHBoxLayout</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQLayoutItem (TQt v2+)</Title>
-<Para>
-<Literal>TQLayoutItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQLayoutIterator (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>TQLayoutItem *<Function>next</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This is a wrapper around the <Literal>TQLayoutIterator</Literal>
-<Literal>++</Literal> operator.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQSpacerItem (TQt v2+)</Title>
-<Para>
-<Literal>TQSpacerItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQVBoxLayout</Title>
-<Para>
-<Literal>TQVBoxLayout</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQWidgetItem (TQt v2+)</Title>
-<Para>
-<Literal>TQWidgetItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLCDNumber</Title>
-<Para>
-<Literal>TQLCDNumber</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLibrary (TQt v3+)</Title>
-<Para>
-<Literal>TQLibrary</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLineEdit</Title>
-<FuncSynopsis>
-	<FuncDef>int <Function>characterAt</Function></FuncDef>
-	<ParamDef>int <Parameter>xpos</Parameter></ParamDef>
-	<ParamDef>TQChar *<Parameter>chr</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>xpos</Literal> parameter and returns the int
-result and the <Literal>chr</Literal> value as a tuple.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>del</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delChar</Literal> in Python.  (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>getSelection</Function></FuncDef>
-	<ParamDef>int *<Parameter>start</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>end</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns the bool result and the
-<Literal>start</Literal> and <Literal>end</Literal> values as a tuple.
-(TQt v3+)
-</Para>
-</Sect2>
-<Sect2><Title>TQPtrList&lt;type&gt; (TQt v2)</Title>
-<Para>
-Types based on the <Literal>TQPtrList</Literal> template are automatically
-converted to and from Python lists of the type.
-</Para>
-</Sect2>
-<Sect2><Title>TQListBox</Title>
-<FuncSynopsis>
-        <FuncDef>bool <Function>itemYPos</Function></FuncDef>
-        <ParamDef>int <Parameter>index</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>yPos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>index</Literal> parameter and returns a tuple
-containing the <Literal>bool</Literal> result and <Literal>yPos</Literal>.
-(TQt v1.x)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQListBoxItem</Title>
-<Para>
-<Literal>TQListBoxItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQListBoxPixmap</Title>
-<Para>
-<Literal>TQListBoxPixmap</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQListBoxText</Title>
-<Para>
-<Literal>TQListBoxText</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQListView</Title>
-<Para>
-<Literal>TQListView</Literal> is fully implemented.
-</Para>
-<Para>
-Note that to remove a child <Literal>TQListViewItem</Literal> you must first
-call <Literal>takeItem()</Literal> and then <Literal>del()</Literal>.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQListViewItem</Title>
-<Para>
-<Literal>TQListViewItem</Literal> is fully implemented.
-</Para>
-<Para>
-Note that to remove a child <Literal>TQListViewItem</Literal> you must first
-call <Literal>takeItem()</Literal> and then <Literal>del()</Literal>.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCheckListItem</Title>
-<Para>
-<Literal>TQCheckListItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQListViewItemIterator (TQt v2+)</Title>
-<Para>
-<Literal>TQListViewItemIterator</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLocale (TQt v3.3+)</Title>
-<FuncSynopsis>
-	<FuncDef>short <Function>toShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>short</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>ushort <Function>toUShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ushort</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>toInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>int</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>uint <Function>toUInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>uint</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQ_LONG <Function>toLong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>long</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQ_ULONG <Function>toULong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ulong</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>float <Function>toFloat</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>float</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>double <Function>toDouble</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>double</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQMainWindow</Title>
-<FuncSynopsis>
-	<FuncDef>TQTextStream &amp;<Function>operator&lt&lt;</Function></FuncDef>
-	<ParamDef>TQTextStream &amp;<Parameter></Parameter></ParamDef>
-	<ParamDef>const TQMainWindow &amp;<Parameter></Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This operator is fully implemented.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQTextStream &amp;<Function>operator&gt&gt;</Function></FuncDef>
-	<ParamDef>TQTextStream &amp;<Parameter></Parameter></ParamDef>
-	<ParamDef>TQMainWindow &amp;<Parameter></Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This operator is fully implemented.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>getLocation</Function></FuncDef>
-	<ParamDef>TQToolBar *<Parameter>tb</Parameter></ParamDef>
-	<ParamDef>ToolBarDock &amp;<Parameter>dock</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>index</Parameter></ParamDef>
-	<ParamDef>bool &amp;<Parameter>nl</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>extraOffset</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>tb</Literal> parameter and returns a tuple of the
-result, <Literal>dock</Literal>, <Literal>index</Literal>,
-<Literal>nl</Literal> and <Literal>extraOffset</Literal> values.  (TQt v2.1.0+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQPtrList&lt;TQToolBar&gt; <Function>toolBars</Function></FuncDef>
-	<ParamDef>ToolBarDock <Parameter>dock</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a list of <Literal>TQToolBar</Literal> instances.  (TQt v2.1.0+)
-</Para>
-</Sect2>
-<Sect2><Title>TQMemArray&lt;type&gt; (TQt v3+)</Title>
-<Para>
-Types based on the <Literal>TQMemArray</Literal> template are automatically
-converted to and from Python lists of the type.
-</Para>
-</Sect2>
-<Sect2><Title>TQMenuBar</Title>
-<Para>
-<Literal>TQMenuBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQMenuData</Title>
-<FuncSynopsis>
-        <FuncDef>TQMenuItem *<Function>findItem</Function></FuncDef>
-        <ParamDef>int <Parameter>id</Parameter></ParamDef>
-        <ParamDef>TQMenuData **<Parameter>parent</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCustomMenuItem (TQt v2.1+)</Title>
-<Para>
-<Literal>TQCustomMenuItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMenuItem</Title>
-<Para>
-<Literal>TQMenuItem</Literal> is an internal TQt class.
-</Para>
-</Sect2>
-<Sect2><Title>TQMessageBox</Title>
-<Para>
-<Literal>TQMessageBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQMetaObject</Title>
-<FuncSynopsis>
-	<FuncDef>int <Function>numClassInfo</Function> const</FuncDef>
-	<ParamDef>bool <Parameter>super</Parameter> = FALSE</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>const TQClassInfo *<Function>classInfo</Function> const</FuncDef>
-	<ParamDef>bool <Parameter>super</Parameter> = FALSE</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMetaProperty</Title>
-<Para>
-<Literal>TQMetaProperty</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQMimeSource (TQt v2+)</Title>
-<Para>
-<Literal>TQMimeSource</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMimeSourceFactory (TQt v2+)</Title>
-<Para>
-<Literal>TQMimeSourceFactory</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQWindowsMime (TQt v3+)</Title>
-<Para>
-<Literal>TQWindowsMime</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQMotifPlusStyle (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>getButtonShift</Function></FuncDef>
-	<ParamDef>int &amp;<Parameter>x</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>x</Literal> and
-<Literal>y</Literal> values.  (TQt v2)
-</Para>
- 
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQScrollBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQMotifStyle (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>tabbarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>t</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>hframe</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>vframe</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>overlap</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>t</Literal> parameter and returns a tuple of the
-<Literal>hframe</Literal>, <Literal>vframe</Literal> and
-<Literal>overlap</Literal> values.  (TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQMovie</Title>
-<FuncSynopsis>
-        <FuncDef><Function>TQMovie</Function></FuncDef>
-        <ParamDef>TQDataSource *<Parameter>src</Parameter></ParamDef>
-        <ParamDef>int <Parameter>bufsize</Parameter> = 1024</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>pushData</Function></FuncDef>
-	<ParamDef>const uchar *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>int <Parameter>length</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>length</Literal> is derived from <Literal>data</Literal> and not
-passed as a parameter. (TQt v2.2.0+)
-</Para>
-</Sect2>
-<Sect2><Title>TQMultiLineEdit</Title>
-<FuncSynopsis>
-        <FuncDef>void <Function>cursorPosition</Function> const</FuncDef>
-        <ParamDef>int *<Parameter>line</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>col</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>line</Literal> and
-<Literal>col</Literal> values.  (TQt v1.x, TQt v2.x)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>virtual void <Function>del</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delChar</Literal> in Python.  (TQt v1.x, TQt v2.x)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>getCursorPosition</Function> const</FuncDef>
-        <ParamDef>int *<Parameter>line</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>col</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>line</Literal> and
-<Literal>col</Literal> values.  (TQt v1.x, TQt v2.x)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>getMarkedRegion</Function></FuncDef>
-        <ParamDef>int *<Parameter>line1</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>col1</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>line2</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>col2</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the bool result and the
-<Literal>line1</Literal>, <Literal>col1</Literal>, <Literal>line2</Literal> and
-<Literal>col2</Literal> values.
-</Para>
-</Sect2>
-<Sect2><Title>TQMutex (TQt v2.2+)</Title>
-<Para>
-<Literal>TQMutex</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQMutexLocker (TQt v3.1+)</Title>
-<Para>
-<Literal>TQMutexLocker</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQNetworkOperation (TQt v2.1+)</Title>
-<Para>
-<Literal>TQNetworkOperation</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQNetworkProtocol (TQt v2.1+)</Title>
-<Para>
-<Literal>TQNetworkProtocol</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQNetworkProtocolFactoryBase (TQt v2.1+)</Title>
-<Para>
-<Literal>TQNetworkProtocolFactoryBase</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQObject</Title>
-<FuncSynopsis>
-	<FuncDef>bool <Function>disconnect</Function></FuncDef>
-	<ParamDef>const TQObject *<Parameter>receiver</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>member</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>disconnect</Function></FuncDef>
-	<ParamDef>const char *<Parameter>signal</Parameter> = 0</ParamDef>
-	<ParamDef>const TQObject *<Parameter>receiver</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>member</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static bool <Function>disconnect</Function></FuncDef>
-	<ParamDef>const TQObject *<Parameter>sender</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>signal</Parameter></ParamDef>
-	<ParamDef>const TQObject *<Parameter>receiver</Parameter></ParamDef>
-	<ParamDef>const char *<Parameter>member</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-At the moment PyTQt does not support the full behaviour of the corresponding TQt
-method. In particular, specifying None (ie. 0 in C++) for the
-<Literal>signal</Literal> and <Literal>receiver</Literal> parameters is not yet
-supported.
-</Para>
-</Sect2>
-<Sect2><Title>TQObjectCleanupHandler (TQt v3+)</Title>
-<Para>
-<Literal>TQObjectCleanupHandler</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQObjectList</Title>
-<Para>
-This class isn't implemented.  Whenever a <Literal>TQObjectList</Literal> is the
-return type of a function or the type of an argument, a Python list of
-<Literal>TQObject</Literal> instances is used instead.
-</Para>
-</Sect2>
-<Sect2><Title>TQPaintDeviceMetrics</Title>
-<Para>
-<Literal>TQPaintDeviceMetrics</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPaintDevice</Title>
-<FuncSynopsis>
-        <FuncDef>virtual bool <Function>cmd</Function></FuncDef>
-        <ParamDef>int</ParamDef>
-        <ParamDef>TQPainter *</ParamDef>
-        <ParamDef>TQPDevCmdParam *</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPainter</Title>
-<FuncSynopsis>
-        <FuncDef>TQRect <Function>boundingRect</Function></FuncDef>
-        <ParamDef>int <Parameter>x</Parameter></ParamDef>
-        <ParamDef>int <Parameter>y</Parameter></ParamDef>
-        <ParamDef>int <Parameter>w</Parameter></ParamDef>
-        <ParamDef>int <Parameter>h</Parameter></ParamDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>intern</Literal> parameter is not supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQRect <Function>boundingRect</Function></FuncDef>
-        <ParamDef>const TQRect&</ParamDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>intern</Literal> parameter is not supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>drawText</Function></FuncDef>
-        <ParamDef>int <Parameter>x</Parameter></ParamDef>
-        <ParamDef>int <Parameter>y</Parameter></ParamDef>
-        <ParamDef>int <Parameter>w</Parameter></ParamDef>
-        <ParamDef>int <Parameter>h</Parameter></ParamDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>TQRect *<Parameter>br</Parameter> = 0</ParamDef>
-        <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>intern</Literal> parameter is not supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>drawText</Function></FuncDef>
-        <ParamDef>const TQRect&</ParamDef>
-        <ParamDef>int <Parameter>flags</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>len</Parameter> = -1</ParamDef>
-        <ParamDef>TQRect *<Parameter>br</Parameter> = 0</ParamDef>
-        <ParamDef>char **<Parameter>intern</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>intern</Literal> parameter is not supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>setTabArray</Function></FuncDef>
-        <ParamDef>int *<Parameter>ta</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single parameter which is a list of tab stops.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int *<Function>tabArray</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a list of tab stops.
-</Para>
-</Sect2>
-<Sect2><Title>TQPalette</Title>
-<Para>
-<Literal>TQPalette</Literal> is fully implemented, including the Python
-<Literal>==</Literal> and <Literal>!=</Literal> operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQPixmap</Title>
-<FuncSynopsis>
-        <FuncDef><Function>TQPixmap</Function></FuncDef>
-        <ParamDef>const char *<Parameter>xpm</Parameter>[]</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a list of strings as its parameter.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>loadFromData</Function></FuncDef>
-        <ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef>
-        <ParamDef>uint <Parameter>len</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>format</Parameter> = 0</ParamDef>
-        <ParamDef>ColorMode <Parameter>mode</Parameter> = Auto</ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>buf</Literal> and not passed as
-a parameter.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>loadFromData</Function></FuncDef>
-        <ParamDef>const uchar *<Parameter>buf</Parameter></ParamDef>
-        <ParamDef>uint <Parameter>len</Parameter></ParamDef>
-        <ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-        <ParamDef>int <Parameter>conversion_flags</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPixmapCache (TQt v3+)</Title>
-<Para>
-<Literal>TQPixmapCache</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPair&lt;type,type&gt; (TQt v3+)</Title>
-<Para>
-Types based on the <Literal>TQPair</Literal> template are automatically
-converted to and from Python tuples of two elements.
-</Para>
-</Sect2>
-<Sect2><Title>TQPen</Title>
-<Para>
-<Literal>TQPen</Literal> is fully implemented, including the Python
-<Literal>==</Literal> and <Literal>!=</Literal> operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQPicture</Title>
-<FuncSynopsis>
-        <FuncDef>const char *<Function>data</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>setData</Function></FuncDef>
-        <ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>uint <Parameter>size</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>size</Literal> is derived from <Literal>data</Literal> and not passed
-as a parameter.
-</Para>
-</Sect2>
-<Sect2><Title>TQPlatinumStyle (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQPoint</Title>
-<Para>
-The Python 
-<Literal>+</Literal>, <Literal>+=</Literal>,
-<Literal>-</Literal>, <Literal>-=</Literal>, unary <Literal>-</Literal>,
-<Literal>*</Literal>, <Literal>*=</Literal>,
-<Literal>/</Literal>, <Literal>/=</Literal>,
-<Literal>==</Literal>, <Literal>!=</Literal> and <Literal>__nonzero__</Literal>
-operators are supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rx</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>ry</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPointArray</Title>
-<FuncSynopsis>
-        <FuncDef><Function>TQPointArray</Function></FuncDef>
-        <ParamDef>int <Parameter>nPoints</Parameter></ParamDef>
-        <ParamDef>const TQCOORD *<Parameter>points</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single parameter which is a list of points.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>point</Function></FuncDef>
-        <ParamDef>uint <Parameter>i</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>x</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the single parameter <Literal>i</Literal> and returns the
-<Literal>x</Literal> and <Literal>y</Literal> values as a tuple.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>putPoints</Function></FuncDef>
-        <ParamDef>int <Parameter>index</Parameter></ParamDef>
-        <ParamDef>int <Parameter>nPoints</Parameter></ParamDef>
-        <ParamDef>const TQCOORD *<Parameter>points</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes two parameters, <Literal>index</Literal> and a list of points.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>putPoints</Function></FuncDef>
-        <ParamDef>int <Parameter>index</Parameter></ParamDef>
-        <ParamDef>int <Parameter>nPoints</Parameter></ParamDef>
-        <ParamDef>int <Parameter>firstx</Parameter></ParamDef>
-        <ParamDef>int <Parameter>firsty</Parameter></ParamDef>
-        <ParamDef>...</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>setPoints</Function></FuncDef>
-        <ParamDef>int <Parameter>nPoints</Parameter></ParamDef>
-        <ParamDef>const TQCOORD *<Parameter>points</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single parameter which is a list of points.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>setPoints</Function></FuncDef>
-        <ParamDef>int <Parameter>nPoints</Parameter></ParamDef>
-        <ParamDef>int <Parameter>firstx</Parameter></ParamDef>
-        <ParamDef>int <Parameter>firsty</Parameter></ParamDef>
-        <ParamDef>...</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPopupMenu</Title>
-<FuncSynopsis>
-        <FuncDef>int <Function>exec</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>exec_loop</Literal> in Python.
-</Para>
-<Para>
-This method also causes ownership of the underlying C++ menu to be transfered
-to Python.  This means that the C++ menu will be deleted when the Python
-wrapper is garbage collected.  Although this is a little inconsistent, it
-ensures that the menu is deleted without having to explicity code it using
-<Literal>TQObject.deleteLater()</Literal> or other techniques.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int <Function>exec</Function></FuncDef>
-        <ParamDef>const TQPoint &<Parameter>pos</Parameter></ParamDef>
-        <ParamDef>int <Parameter>indexAtPoint</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>exec_loop</Literal> in Python.
-</Para>
-<Para>
-This method also causes ownership of the underlying C++ menu to be transfered
-to Python.  This means that the C++ menu will be deleted when the Python
-wrapper is garbage collected.  Although this is a little inconsistent, it
-ensures that the menu is deleted without having to explicity code it using
-<Literal>TQObject.deleteLater()</Literal> or other techniques.
-</Para>
-</Sect2>
-<Sect2><Title>TQPrintDialog (X11)</Title>
-<Para>
-<Literal>TQPrintDialog</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQPrinter</Title>
-<Para>
-<Literal>TQPrinter</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQProcess (TQt v3+)</Title>
-<Para>
-<Literal>TQProcess</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQProgressBar</Title>
-<Para>
-<Literal>TQProgressBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQProgressDialog</Title>
-<Para>
-<Literal>TQProgressDialog</Literal> is fully implemented.
-value.
-</Para>
-</Sect2>
-<Sect2><Title>TQPtrList&lt;type&gt; (TQt v2+)</Title>
-<Para>
-Types based on the <Literal>TQPtrList</Literal> template are automatically
-converted to and from Python lists of the type.
-</Para>
-</Sect2>
-<Sect2><Title>TQPushButton</Title>
-<Para>
-<Literal>TQPushButton</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQRadioButton</Title>
-<Para>
-<Literal>TQRadioButton</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQRangeControl</Title>
-<Para>
-<Literal>TQRangeControl</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQRect</Title>
-<Para>
-The Python
-<Literal>&amp;</Literal>, <Literal>&amp;=</Literal>,
-<Literal>|</Literal>, <Literal>|=</Literal>,
-<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>in</Literal> and
-<Literal>__nonzero__</Literal> operators are supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>coords</Function></FuncDef>
-        <ParamDef>int *<Parameter>x1</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>y1</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>x2</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>y2</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple containing the four values.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>rect</Function></FuncDef>
-        <ParamDef>int *<Parameter>x</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>y</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>w</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>h</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple containing the four values.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rBottom</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rLeft</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rRight</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rTop</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented. (TQt v2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQRegExp</Title>
-<Para>
-The Python <Literal>==</Literal> and <Literal>!=</Literal> operators are
-supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int <Function>match</Function></FuncDef>
-        <ParamDef>const char *<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>index</Parameter> = 0</ParamDef>
-        <ParamDef>int *<Parameter>len</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes <Literal>str</Literal> and <Literal>index</Literal> parameters and
-returns a tuple of the <Literal>int</Literal> result and the
-<Literal>len</Literal> value. (TQt v1.x)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int <Function>match</Function></FuncDef>
-        <ParamDef>const TQString &<Parameter>str</Parameter></ParamDef>
-        <ParamDef>int <Parameter>index</Parameter> = 0</ParamDef>
-        <ParamDef>int *<Parameter>len</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes <Literal>str</Literal> and <Literal>index</Literal> parameters and
-returns a tuple of the <Literal>int</Literal> result and the
-<Literal>len</Literal> value. (TQt v2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQRegion</Title>
-<Para>
-The Python
-<Literal>|</Literal>, <Literal>|=</Literal>,
-<Literal>+</Literal>, <Literal>+=</Literal>,
-<Literal>&amp;</Literal>, <Literal>&amp;=</Literal>,
-<Literal>-</Literal>, <Literal>-=</Literal>,
-<Literal>^</Literal>, <Literal>^=</Literal>,
-<Literal>==</Literal>, <Literal>!=</Literal>, <Literal>in</Literal> and
-<Literal>__nonzero__</Literal> operators are supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQArray&lt;TQRect&gt; <Function>rects</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>setRects</Function></FuncDef>
-	<ParamDef>TQRect *<Parameter>rects</Parameter></ParamDef>
-	<ParamDef>int <Parameter>num</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2.2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQScrollBar</Title>
-<Para>
-<Literal>TQScrollBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQScrollView</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>contentsToViewport</Function></FuncDef>
-	<ParamDef>int <Parameter>x</Parameter></ParamDef>
-	<ParamDef>int <Parameter>y</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>vx</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>vy</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and
-returns a tuple containing the <Literal>vx</Literal> and <Literal>vy</Literal>
-values. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>viewportToContents</Function></FuncDef>
-	<ParamDef>int <Parameter>vx</Parameter></ParamDef>
-	<ParamDef>int <Parameter>vy</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>x</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>vx</Literal> and <Literal>vy</Literal> parameters and
-returns a tuple containing the <Literal>x</Literal> and <Literal>y</Literal>
-values. (TQt v2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQSemaphore (TQt v2.2+)</Title>
-<Para>
-<Literal>TQSemaphore</Literal> is fully implemented.  The <Literal>+=</Literal>
-and <Literal>-=</Literal> operators have also been implemented, but require
-Python v2.0 or later.
-</Para>
-</Sect2>
-<Sect2><Title>TQSemiModal (TQt v1, v2)</Title>
-<Para>
-<Literal>TQSemiModal</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSessionManager (TQt v2+)</Title>
-<Para>
-<Literal>TQSessionManager</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSettings (TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef>bool <Function>readBoolEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>def</Parameter> = 0</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>bool</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>double <Function>readDoubleEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>double <Parameter>def</Parameter> = 0</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>double</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>TQString <Function>readEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>const TQString &amp;<Parameter>def</Parameter> = TQString::null</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQString</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>TQStringList <Function>readListEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQStringList</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>TQStringList <Function>readListEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>const TQChar &amp;<Parameter>separator</Parameter></ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>TQStringList</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>int <Function>readNumEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>int <Parameter>def</Parameter> = 0</ParamDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>ok</Literal> is not passed and the returned value is a tuple of
-the <Literal>int</Literal> result and the <Literal>ok</Literal> flag.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>writeEntry</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>key</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>value</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSGIStyle (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQScrollBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQSignalMapper</Title>
-<Para>
-<Literal>TQSignalMapper</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSimpleRichText (TQt v2+)</Title>
-<Para>
-<Literal>TQSimpleRichText</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSize</Title>
-<Para>
-The Python
-<Literal>+</Literal>, <Literal>+=</Literal>,
-<Literal>-</Literal>, <Literal>-=</Literal>,
-<Literal>*</Literal>, <Literal>*=</Literal>,
-<Literal>/</Literal>, <Literal>/=</Literal>,
-<Literal>==</Literal>, <Literal>!=</Literal> and <Literal>__nonzero__</Literal>
-operators are supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rheight</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQCOORD &amp;<Function>rwidth</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSizeGrip (TQt v2+)</Title>
-<Para>
-<Literal>TQSizeGrip</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSizePolicy (TQt v2+)</Title>
-<Para>
-<Literal>TQSizePolicy</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSlider</Title>
-<Para>
-<Literal>TQSlider</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSocketNotifier</Title>
-<Para>
-<Literal>TQSocketNotifier</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSound (TQt v2.2+)</Title>
-<Para>
-<Literal>TQSound</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSpinBox</Title>
-<FuncSynopsis>
-        <FuncDef>virtual int <Function>mapTextToValue</Function></FuncDef>
-        <ParamDef>bool *<Parameter>ok</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>int</Literal> result and the modified
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQSplashScreen (TQt v3.2.0+)</Title>
-<Para>
-<Literal>TQSplashScreen</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSplitter</Title>
-<FuncSynopsis>
-        <FuncDef>void <Function>getRange</Function></FuncDef>
-        <ParamDef>int <Parameter>id</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>min</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>max</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>id</Literal> parameter and returns the
-<Literal>min</Literal> and <Literal>max</Literal> values as a tuple. (TQt v2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQStatusBar</Title>
-<Para>
-<Literal>TQStatusBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQChar (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>uchar &<Function>cell</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>uchar &<Function>row</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQString</Title>
-<Para>
-A Python string object (or Unicode object) can be used whenever a
-<Literal>TQString</Literal> can be used.  A <Literal>TQString</Literal> can be
-converted to a Python string object using the Python <Literal>str()</Literal>
-function, and to a Python Unicode object using the Python
-<Literal>unicode()</Literal> function.
-</Para>
-
-<Para>
-The Python <Literal>+</Literal>, <Literal>+=</Literal>, <Literal>*</Literal>,
-<Literal>*=</Literal>, <Literal>len</Literal>, <Literal>[]</Literal>
-(for reading slices and individual characters), <Literal>in</Literal> and
-comparison operators are supported.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQCharRef <Function>at</Function></FuncDef>
-	<ParamDef>uint <Parameter>i</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQChar <Function>constref</Function> const</FuncDef>
-	<ParamDef>uint <Parameter>i</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQChar &<Function>ref</Function></FuncDef>
-	<ParamDef>uint <Parameter>i</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQString &<Function>setUnicodeCodes</Function></FuncDef>
-	<ParamDef>const ushort *<Parameter>unicode_as_shorts</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented. (TQt v2.1+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQString &<Function>sprintf</Function></FuncDef>
-	<ParamDef>const char *<Parameter>format</Parameter></ParamDef>
-	<ParamDef>...</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>short <Function>toShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>short</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>ushort <Function>toUShort</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ushort</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>toInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>int</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>uint <Function>toUInt</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>uint</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>long <Function>toLong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>long</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>ulong <Function>toULong</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>ulong</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>float <Function>toFloat</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>float</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>double <Function>toDouble</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>double</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQStringList (TQt v2+)</Title>
-<Para>
-The Python <Literal>len</Literal>, <Literal>[]</Literal> (for both reading and
-writing slices and individual elements), <Literal>del</Literal> (for deleting
-slices and individual elements), <Literal>+</Literal>, <Literal>+=</Literal>,
-<Literal>*</Literal>, <Literal>*=</Literal>, <Literal>==</Literal>,
-<Literal>!=</Literal> and <Literal>in</Literal> operators are supported.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>Iterator <Function>append</Function></FuncDef>
-	<ParamDef>const TQString &<Parameter>x</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This does not return a value.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>Iterator <Function>prepend</Function></FuncDef>
-	<ParamDef>const TQString &<Parameter>x</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This does not return a value.
-</Para>
-</Sect2>
-<Sect2><Title>TQStrList</Title>
-<Para>
-This class isn't implemented.  Whenever a <Literal>TQStrList</Literal> is the
-return type of a function or the type of an argument, a Python list of strings
-is used instead.
-</Para>
-</Sect2>
-<Sect2><Title>TQStyle (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>getButtonShift</Function></FuncDef>
-	<ParamDef>int &amp;<Parameter>x</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>x</Literal> and
-<Literal>y</Literal> values.  (TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQScrollBar *<Parameter>b</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Thus takes only the <Literal>b</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>tabbarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>t</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>hframe</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>vframe</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>overlap</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>t</Literal> parameter and returns a tuple of the
-<Literal>hframe</Literal>, <Literal>vframe</Literal> and
-<Literal>overlap</Literal> values.  (TQt v2)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQStyleOption (TQt v3+)</Title>
-<Para>
-<Literal>TQStyleOption</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQStyleSheet (TQt v2+)</Title>
-<Para>
-<Literal>TQStyleSheet</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQStyleSheetItem (TQt v2+)</Title>
-<Para>
-<Literal>TQStyleSheetItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSyntaxHighlighter (TQt v3.1+)</Title>
-<Para>
-<Literal>TQSyntaxHighlighter</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTab</Title>
-<Para>
-<Literal>TQTab</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTabBar</Title>
-<FuncSynopsis>
-        <FuncDef>TQPtrList&lt;TQTab&gt; <Function>tabList</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a list of <Literal>TQTab</Literal> instances.
-</Para>
-</Sect2>
-<Sect2><Title>TQTabDialog</Title>
-<Para>
-<Literal>TQTabDialog</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTableView (TQt 1.x, TQt 2.x)</Title>
-<FuncSynopsis>
-        <FuncDef>bool <Function>colXPos</Function></FuncDef>
-        <ParamDef>int <Parameter>col</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>xPos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>col</Literal> parameter and returns a tuple containing
-the <Literal>bool</Literal> result and <Literal>xPos</Literal>.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool <Function>rowYPos</Function></FuncDef>
-        <ParamDef>int <Parameter>row</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>yPos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>row</Literal> parameter and returns a tuple containing
-the <Literal>bool</Literal> result and <Literal>yPos</Literal>.
-</Para>
-</Sect2>
-<Sect2><Title>TQTabWidget (TQt v2+)</Title>
-<Para>
-<Literal>TQTabWidget</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTextBrowser (TQt v2+)</Title>
-<Para>
-<Literal>TQTextBrowser</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTextCodec (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual TQCString <Function>fromUnicode</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>uc</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>lenInOut</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>TQCString</Literal> result and the
-updated <Literal>lenInOut</Literal>.
-</Para>
-</Sect2>
- 
-<Sect2><Title>TQTextDecoder (TQt v2+)</Title>
-<Para>
-<Literal>TQTextDecoder</Literal> is fully implemented.
-</Para>
-</Sect2>
- 
-<Sect2><Title>TQTextEncoder (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual TQCString <Function>fromUnicode</Function> = 0</FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>uc</Parameter></ParamDef>
-	<ParamDef>int &amp;<Parameter>lenInOut</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>TQCString</Literal> result and the
-updated <Literal>lenInOut</Literal>.
-</Para>
-</Sect2>
-<Sect2><Title>TQTextEdit (TQt v3+)</Title>
-<FuncSynopsis>
-<FuncDef>int <Function>charAt</Function></FuncDef>
-	<ParamDef>const TQPoint &amp;<Parameter>pos</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>para</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>pos</Literal> parameter and returns a tuple of the
-value returned via the <Literal>para</Literal> pointer and the int result.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>del</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delChar</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>virtual bool <Function>find</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>expr</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>cs</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>wo</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>forward</Parameter> = TRUE</ParamDef>
-	<ParamDef>int *<Parameter>para</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>index</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-If the <Literal>para</Literal> and <Literal>index</Literal> parameters are
-omitted then the bool result is returned.  If both are supplied (as integers)
-then a tuple of the bool result and the modified values of
-<Literal>para</Literal> and <Literal>index</Literal> is returned.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>void <Function>getCursorPosition</Function></FuncDef>
-	<ParamDef>int *<Parameter>para</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>index</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the values returned via the
-<Literal>para</Literal> and <Literal>index</Literal> pointers.
-</Para>
-
-<FuncSynopsis>
-<FuncDef>void <Function>getSelection</Function></FuncDef>
-	<ParamDef>int *<Parameter>paraFrom</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>indexFrom</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>paraTo</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>indexTo</Parameter></ParamDef>
-	<ParamDef>int <Parameter>selNum</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>selNum</Literal> parameter and returns a tuple of
-the <Literal>paraFrom</Literal>, <Literal>indexFrom</Literal>,
-<Literal>paraTo</Literal> and <Literal>indexTo</Literal> values.
-</Para>
-</Sect2>
-<Sect2><Title>TQTextStream</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQTextStream</Function></FuncDef>
-	<ParamDef>FILE *<Parameter>fp</Parameter></ParamDef>
-	<ParamDef>int <Parameter>mode</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQTextStream &<Function>readRawBytes</Function></FuncDef>
-	<ParamDef>char *<Parameter>buf</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQTextStream &<Function>writeRawBytes</Function></FuncDef>
-	<ParamDef>const char *<Parameter>buf</Parameter></ParamDef>
-	<ParamDef>uint <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTextIStream (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQTextIStream</Function></FuncDef>
-	<ParamDef>FILE *<Parameter>fp</Parameter></ParamDef>
-	<ParamDef>int <Parameter>mode</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTextOStream (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQTextOStream</Function></FuncDef>
-	<ParamDef>FILE *<Parameter>fp</Parameter></ParamDef>
-	<ParamDef>int <Parameter>mode</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTextView (TQt v2+)</Title>
-<Para>
-<Literal>TQTextView</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQThread (TQt v2.2+)</Title>
-<Para>
-<Literal>TQThread</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTimer</Title>
-<Para>
-<Literal>TQTimer</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQToolBar</Title>
-<Para>
-<Literal>TQToolBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQToolBox (TQt v3.2.0+)</Title>
-<Para>
-<Literal>TQToolBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQToolButton</Title>
-<Para>
-<Literal>TQToolButton</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQToolTip</Title>
-<Para>
-<Literal>TQToolTip</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQToolTipGroup</Title>
-<Para>
-<Literal>TQToolTipGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQTranslator (TQt v2+)</Title>
-<Para>
-<Literal>TQTranslator</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTranslatorMessage (TQt v2.2+)</Title>
-<Para>
-<Literal>TQTranslatorMessage</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQUrl (TQt v2.1+)</Title>
-<Para>
-<Literal>TQUrl</Literal> is fully implemented, including the
-<Literal>TQString()</Literal>, <Literal>==</Literal> and <Literal>!=</Literal>
-operators.
-</Para>
-</Sect2>
-<Sect2><Title>TQUrlInfo (TQt v2.1+)</Title>
-<Para>
-<Literal>TQUrlInfo</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQUrlOperator (TQt v2.1+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual bool <Function>isDir</Function></FuncDef>
-	<ParamDef>bool *<Parameter>ok</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This returns a tuple of the <Literal>bool</Literal> result and the
-<Literal>ok</Literal> value.
-</Para>
-</Sect2>
-<Sect2><Title>TQUuid (TQt v3.0+)</Title>
-<Para>
-<Literal>TQUuid</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQValidator</Title>
-<FuncSynopsis>
-        <FuncDef>virtual State <Function>validate</Function></FuncDef>
-        <ParamDef>TQString& <Parameter>input</Parameter></ParamDef>
-        <ParamDef>int& <Parameter>pos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>State</Literal> result and the
-updated <Literal>pos</Literal>.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDoubleValidator</Title>
-<FuncSynopsis>
-        <FuncDef>State <Function>validate</Function></FuncDef>
-        <ParamDef>TQString& <Parameter>input</Parameter></ParamDef>
-        <ParamDef>int& <Parameter>pos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>State</Literal> result and the
-updated <Literal>pos</Literal>.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQIntValidator</Title>
-<FuncSynopsis>
-        <FuncDef>State <Function>validate</Function></FuncDef>
-        <ParamDef>TQString& <Parameter>input</Parameter></ParamDef>
-        <ParamDef>int& <Parameter>pos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>State</Literal> result and the
-updated <Literal>pos</Literal>.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQRegExpValidator (TQt v3+)</Title>
-<FuncSynopsis>
-        <FuncDef>virtual State <Function>validate</Function></FuncDef>
-        <ParamDef>TQString& <Parameter>input</Parameter></ParamDef>
-        <ParamDef>int& <Parameter>pos</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The returned value is a tuple of the <Literal>State</Literal> result and the
-updated <Literal>pos</Literal>.
-</Para>
-</Sect2>
-<Sect2><Title>TQValueList&lt;type&gt; (TQt v2+)</Title>
-<Para>
-Types based on the <Literal>TQValueList</Literal> template are automatically
-converted to and from Python lists of the type.
-</Para>
-</Sect2>
-<Sect2><Title>TQVariant (TQt v2.1+)</Title>
-<FuncSynopsis>
-        <FuncDef><Function>TQVariant</Function></FuncDef>
-        <ParamDef>const char *<Parameter>val</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQVariant</Function></FuncDef>
-        <ParamDef>const TQBitArray &amp;<Parameter>val</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQVariant</Function></FuncDef>
-        <ParamDef>const TQValueList&lt;TQVariant&gt; &amp;<Parameter>val</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef><Function>TQVariant</Function></FuncDef>
-        <ParamDef>const TQMap&lt;TQString,TQVariant&gt; &amp;<Parameter>val</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQBitArray &amp;<Function>asBitArray</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>bool &amp;<Function>asBool</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>double &amp;<Function>asDouble</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>int &amp;<Function>asInt</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQValueList&lt;TQVariant&gt; &amp;<Function>asList</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQMap&lt;TQString,TQVariant&gt; &amp;<Function>asMap</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>uint &amp;<Function>asUInt</Function></FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQValueListConstIterator&lt;TQVariant&gt;<Function>listBegin</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQValueListConstIterator&lt;TQVariant&gt;<Function>listEnd</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQMapConstIterator&lt;TQString,TQVariant&gt;<Function>mapBegin</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQMapConstIterator&lt;TQString,TQVariant&gt;<Function>mapEnd</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQMapConstIterator&lt;TQString,TQVariant&gt;<Function>mapFind</Function> const</FuncDef>
-        <ParamDef>const TQString &<Parameter>key</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQValueListConstIterator&lt;TQString&gt;<Function>stringListBegin</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQValueListConstIterator&lt;TQString&gt;<Function>stringListEnd</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>const TQBitArray <Function>toBitArray</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>const TQValueList&lt;TQVariant&gt;<Function>toList</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>const TQMap&lt;TQString,TQVariant&gt;<Function>toMap</Function> const</FuncDef>
-        <ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQVBox (TQt v2+)</Title>
-<Para>
-<Literal>TQVBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQVButtonGroup (TQt v2+)</Title>
-<Para>
-<Literal>TQVButtonGroup</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQVGroupBox (TQt v2+)</Title>
-<Para>
-<Literal>TQVGroupBox</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWaitCondition (TQt v2.2+)</Title>
-<Para>
-<Literal>TQWaitCondition</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWhatsThis</Title>
-<Para>
-<Literal>TQWhatsThis</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWidget</Title>
-<FuncSynopsis>
-	<FuncDef>TQWExtra *<Function>extraData</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>TQFocusData *<Function>focusData</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>lower</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>lowerW</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>raise</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>raiseW</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQWidgetList</Title>
-<Para>
-This class isn't implemented.  Whenever a <Literal>TQWidgetList</Literal> is the
-return type of a function or the type of an argument, a Python list of
-instances is used instead.
-</Para>
-</Sect2>
-<Sect2><Title>TQWidgetStack</Title>
-<Para>
-<Literal>TQWidgetStack</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWindow</Title>
-<Para>
-<Literal>TQWindow</Literal> is fully implemented (TQt v1.x).
-</Para>
-</Sect2>
-<Sect2><Title>TQWindowsStyle (TQt v2+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>getButtonShift</Function></FuncDef>
-	<ParamDef>int &<Parameter>x</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>y</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>x</Literal> and
-<Literal>y</Literal> values.  (TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>scrollBarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>sb</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMin</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderMax</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>sliderLength</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>buttonDim</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>sb</Literal> parameter and returns a tuple of the
-<Literal>sliderMin</Literal>, <Literal>sliderMax</Literal>,
-<Literal>sliderLength</Literal> and <Literal>buttonDim</Literal> values.
-(TQt v2)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>tabbarMetrics</Function></FuncDef>
-	<ParamDef>const TQTabBar *<Parameter>t</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>hframe</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>vframe</Parameter></ParamDef>
-	<ParamDef>int &<Parameter>overlap</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes only the <Literal>t</Literal> parameter and returns a tuple of the
-<Literal>hframe</Literal>, <Literal>vframe</Literal> and
-<Literal>overlap</Literal> values.  (TQt v2)
-</Para>
-</Sect2>
-<Sect2><Title>TQWindowsXPStyle (TQt v3.0.1+, Windows)</Title>
-<Para>
-<Literal>TQWindowsXPStyle</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWizard (TQt v2+)</Title>
-<Para>
-<Literal>TQWizard</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQWMatrix</Title>
-<Para>
-The Python <Literal>==</Literal>, <Literal>!=</Literal> and
-<Literal>*=</Literal> operators are supported.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQWMatrix <Function>invert</Function> const</FuncDef>
-        <ParamDef>bool *<Parameter>invertible</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the <Literal>TQWMatrix</Literal>
-result and the <Literal>invertible</Literal> value.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>map</Function> const</FuncDef>
-        <ParamDef>int <Parameter>x</Parameter></ParamDef>
-        <ParamDef>int <Parameter>y</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>tx</Parameter></ParamDef>
-        <ParamDef>int *<Parameter>ty</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and
-returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal>
-values.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>map</Function> const</FuncDef>
-        <ParamDef>float <Parameter>x</Parameter></ParamDef>
-        <ParamDef>float <Parameter>y</Parameter></ParamDef>
-        <ParamDef>float *<Parameter>tx</Parameter></ParamDef>
-        <ParamDef>float *<Parameter>ty</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and
-returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal>
-values. (TQt v1.x)
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>void <Function>map</Function> const</FuncDef>
-        <ParamDef>double <Parameter>x</Parameter></ParamDef>
-        <ParamDef>double <Parameter>y</Parameter></ParamDef>
-        <ParamDef>double *<Parameter>tx</Parameter></ParamDef>
-        <ParamDef>double *<Parameter>ty</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>x</Literal> and <Literal>y</Literal> parameters and
-returns a tuple containing the <Literal>tx</Literal> and <Literal>ty</Literal>
-values. (TQt v2+)
-</Para>
-</Sect2>
-<Sect2><Title>TQWorkspace (TQt v2.1+)</Title>
-<Para>
-<Literal>TQWorkspace</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtaxcontainer</Literal> Module Reference</Title>
-<Sect2><Title>TQAxBase (Windows, TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQAxObject</Function></FuncDef>
-	<ParamDef>IUnknown *<Parameter>iface</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>long <Function>queryInterface</Function></FuncDef>
-	<ParamDef>const TQUuid &amp;<Parameter>uuid</Parameter></ParamDef>
-	<ParamDef>void **<Parameter>iface</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>PropertyBag <Function>propertyBag</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>setPropertyBag</Function></FuncDef>
-	<ParamDef>const PropertyBag &amp;<Parameter>bag</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>unsigned long <Function>registerWeakActiveObject</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>guid</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This is a utility method provided by PyTQt to make it easier to use
-Mark Hammond's <Literal>win32com</Literal> module to manipulate objects
-created by the <Literal>qtaxcontainer</Literal> module.
-</Para>
-<Para>
-The <Literal>RegisterActiveObject()</Literal> COM function is called to
-register the <Literal>TQAxBase</Literal> instance as a weak object with the
-<Literal>guid</Literal> GUID.  The revoke handle is returned.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>static void <Function>revokeActiveObject</Function></FuncDef>
-	<ParamDef>unsigned long <Parameter>rhandle</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This is a wrapper around the <Literal>RevokeActiveObject()</Literal> COM
-function and is called to revoke the object registered using
-<Literal>registerWeakActiveObject()</Literal>.  <Literal>rhandle</Literal> is
-the revoke handle returned by <Literal>registerWeakActiveObject()</Literal>.
-</Para>
-</Sect2>
-<Sect2><Title>TQAxObject (Windows, TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQAxObject</Function></FuncDef>
-	<ParamDef>IUnknown *<Parameter>iface</Parameter></ParamDef>
-	<ParamDef>TQObject *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQAxWidget (Windows, TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQAxWidget</Function></FuncDef>
-	<ParamDef>IUnknown *<Parameter>iface</Parameter></ParamDef>
-	<ParamDef>TQWidget *<Parameter>parent</Parameter> = 0</ParamDef>
-	<ParamDef>const char *<Parameter>name</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtcanvas</Literal> Module Reference</Title>
-<Sect2><Title>TQCanvas (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvas</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasEllipse (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasEllipse</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasItem (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasItemList (TQt v2.2+)</Title>
-<Para>
-This class isn't implemented.  Whenever a <Literal>TQCanvasItemList</Literal> is
-the return type of a function or the type of an argument, a Python list of
-<Literal>TQCanvasItem</Literal> instances is used instead.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasLine (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasLine</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasPixmap (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasPixmap</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasPixmapArray (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQPixmapArray</Function></FuncDef>
-	<ParamDef>TQPtrList&lt;TQPixmap&gt; <Parameter>pixmaps</Parameter></ParamDef>
-	<ParamDef>TQPtrList&lt;TQPoint&gt; <Parameter>hotspots</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>pixmaps</Literal> argument is a Python list of TQPixmap instances,
-and the <Literal>hotspots</Literal> argument is a Python list of TQPoint
-instances.  (TQt v2.2.0 - TQt v2.3.1)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef><Function>TQPixmapArray</Function></FuncDef>
-	<ParamDef>TQValueList&lt;TQPixmap&gt; <Parameter>pixmaps</Parameter></ParamDef>
-	<ParamDef>TQPointArray <Parameter>hotspots</Parameter> = TQPointArray()</ParamDef>
-</FuncSynopsis>
-<Para>
-The <Literal>pixmaps</Literal> argument is a Python list of TQPixmap instances.
-(TQt v3+)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasPolygon (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasPolygon</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasPolygonalItem (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasPolygonalItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasRectangle (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasRectangle</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasSpline (TQt v3.0+)</Title>
-<Para>
-<Literal>TQCanvasSpline</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasSprite (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasSprite</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasText (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasText</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCanvasView (TQt v2.2+)</Title>
-<Para>
-<Literal>TQCanvasView</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtext</Literal> Module Reference</Title>
-
-<Sect2><Title>TQextScintilla</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>getCursorPosition</Function></FuncDef>
-	<ParamDef>int *<Parameter>line</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>index</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the values returned by the
-<Literal>line</Literal> and <Literal>index</Literal> pointers.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>getSelection</Function></FuncDef>
-	<ParamDef>int *<Parameter>lineFrom</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>indexFrom</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>lineTo</Parameter></ParamDef>
-	<ParamDef>int *<Parameter>indexTo</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes no parameters and returns a tuple of the values returned by the
-<Literal>lineFrom</Literal>, <Literal>indexFrom</Literal>,
-<Literal>lineTo</Literal> and <Literal>indexTo</Literal> pointers.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaAPIs</Title>
-<Para>
-<Literal>TQextScintillaAPIs</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaBase</Title>
-<Para>
-<Literal>TQextScintillaBase</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaCommand</Title>
-<Para>
-<Literal>TQextScintillaCommand</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaCommandSet</Title>
-<Para>
-<Literal>TQextScintillaCommandSet</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaDocument</Title>
-<Para>
-<Literal>TQextScintillaDocument</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexer</Title>
-<Para>
-<Literal>TQextScintillaLexer</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerBash (TQScintilla v1.4+)</Title>
-<Para>
-<Literal>TQextScintillaLexerBash</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerBatch (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerBatch</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerCPP</Title>
-<Para>
-<Literal>TQextScintillaLexerCPP</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerCSharp</Title>
-<Para>
-<Literal>TQextScintillaLexerCSharp</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerCSS (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerCSS</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerDiff (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerDiff</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerHTML (TQScintilla v1.1+)</Title>
-<Para>
-<Literal>TQextScintillaLexerHTML</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerIDL</Title>
-<Para>
-<Literal>TQextScintillaLexerIDL</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerJava</Title>
-<Para>
-<Literal>TQextScintillaLexerJava</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerJavaScript</Title>
-<Para>
-<Literal>TQextScintillaLexerJavaScript</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerLua (TQScintilla v1.5+)</Title>
-<Para>
-<Literal>TQextScintillaLexerLua</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerMakefile (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerMakefile</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerPerl</Title>
-<Para>
-<Literal>TQextScintillaLexerPerl</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerPOV (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerPOV</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerProperties (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerProperties</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerPython</Title>
-<Para>
-<Literal>TQextScintillaLexerPython</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerRuby (TQScintilla v1.5+)</Title>
-<Para>
-<Literal>TQextScintillaLexerRuby</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerSQL (TQScintilla v1.1+)</Title>
-<Para>
-<Literal>TQextScintillaLexerSQL</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaLexerTeX (TQScintilla v1.6+)</Title>
-<Para>
-<Literal>TQextScintillaLexerTeX</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaMacro</Title>
-<Para>
-<Literal>TQextScintillaMacro</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQextScintillaPrinter</Title>
-<Para>
-<Literal>TQextScintillaPrinter</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtgl</Literal> Module Reference</Title>
-<Sect2><Title>TQGL</Title>
-<Para>
-<Literal>TQGL</Literal> is fully implemented.
-</Para>
-</Sect2>
- 
-<Sect2><Title>TQGLContext</Title>
-<Para>
-<Literal>TQGLContext</Literal> is fully implemented.
-</Para>
-</Sect2>
- 
-<Sect2><Title>TQGLFormat</Title>
-<Para>
-<Literal>TQGLFormat</Literal> is fully implemented.
-</Para>
-</Sect2>
- 
-<Sect2><Title>TQGLWidget</Title>
-<Para>
-<Literal>TQGLWidget</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQGLColormap (TQt v3.0+)</Title>
-<FuncSynopsis>
-	<FuncDef>void <Function>setEntries</Function></FuncDef>
-	<ParamDef>int <Parameter>count</Parameter></ParamDef>
-	<ParamDef>const TQRgb *<Parameter>colors</Parameter></ParamDef>
-	<ParamDef>int <Parameter>base</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtnetwork</Literal> Module Reference</Title>
-<Sect2><Title>TQDns (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDns</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQFtp (TQt v2.2+)</Title>
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>readBlock</Function></FuncDef>
-        <ParamDef>char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>maxlen</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>maxlen</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>None</Literal> is returned.
-</Para>
-</Sect2>
-<Sect2><Title>TQHostAddress (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQHostAddress</Function></FuncDef>
-	<ParamDef>TQ_UINT8 *<Parameter>ip6Addr</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef><Function>TQHostAddress</Function></FuncDef>
-	<ParamDef>const Q_IPV6ADDR &amp;<Parameter>ip6Addr</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>void <Function>setAddress</Function></FuncDef>
-	<ParamDef>TQ_UINT8 *<Parameter>ip6Addr</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>Q_IPV6ADDR <Function>toIPv6Address</Function> const</FuncDef>
-	<ParamDef><Parameter></Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQHttp (TQt v3+)</Title>
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>readBlock</Function></FuncDef>
-        <ParamDef>char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>maxlen</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>maxlen</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>None</Literal> is returned.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQHttpHeader (TQt v3.1+)</Title>
-<Para>
-<Literal>TQHttpHeader</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQHttpRequestHeader (TQt v3.1+)</Title>
-<Para>
-<Literal>TQHttpRequestHeader</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQHttpResponseHeader (TQt v3.1+)</Title>
-<Para>
-<Literal>TQHttpResponseHeader</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQLocalFs (TQt v2.1+)</Title>
-<Para>
-<Literal>TQLocalFs</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQServerSocket (TQt v2.2+)</Title>
-<Para>
-<Literal>TQServerSocket</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSocket (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef>TQ_LONG <Function>readBlock</Function></FuncDef>
-	<ParamDef>char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>len</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>Py_None</Literal> is returned.
-</Para>
- 
-<FuncSynopsis>
-	<FuncDef>TQ_LONG <Function>readLine</Function></FuncDef>
-	<ParamDef>char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>TQ_ULONG <Parameter>maxlen</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>maxlen</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>Py_None</Literal> is returned.
-</Para>
- 
-<FuncSynopsis>
-	<FuncDef>TQ_LONG <Function>writeBlock</Function></FuncDef>
-	<ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-	<ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed
-as a parameter.
-</Para>
-</Sect2>
-<Sect2><Title>TQSocketDevice (TQt v2.2+)</Title>
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>readBlock</Function></FuncDef>
-        <ParamDef>char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes a single <Literal>len</Literal> parameter.  The
-<Literal>data</Literal> is returned if there was no error, otherwise
-<Literal>None</Literal> is returned.
-</Para>
-
-<FuncSynopsis>
-        <FuncDef>TQ_LONG <Function>writeBlock</Function></FuncDef>
-        <ParamDef>const char *<Parameter>data</Parameter></ParamDef>
-        <ParamDef>TQ_ULONG <Parameter>len</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-<Literal>len</Literal> is derived from <Literal>data</Literal> and not passed
-as a parameter.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtpe</Literal> Module Reference</Title>
-
-<Sect2><Title>TQPEApplication</Title>
-<FuncSynopsis>
-	<FuncDef><Function>TQApplication</Function></FuncDef>
-	<ParamDef>int& <Parameter>argc</Parameter></ParamDef>
-	<ParamDef>char **<Parameter>argv</Parameter></ParamDef>
-	<ParamDef>Type <Parameter>type</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This takes two parameters, the first of which is a list of argument strings.
-Arguments used by TQt are removed from the list.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>int <Function>exec</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_loop</Literal> in Python.
-</Para>
-</Sect2>
-
-<Sect2><Title>AppLnk</Title>
-<FuncSynopsis>
-	<FuncDef>virtual TQString <Function>exec</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_property</Literal> in Python.
-</Para>
-</Sect2>
-
-<Sect2><Title>AppLnkSet</Title>
-<Para>
-<Literal>AppLnkSet</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>Config</Title>
-<Para>
-<Literal>Config</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>DateFormat</Title>
-<Para>
-<Literal>DateFormat</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>DocLnk</Title>
-<FuncSynopsis>
-	<FuncDef>TQString <Function>exec</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed to <Literal>exec_property</Literal> in Python.
-</Para>
-</Sect2>
-
-<Sect2><Title>DocLnkSet</Title>
-<Para>
-<Literal>DocLnkSet</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>FileManager</Title>
-<Para>
-<Literal>FileManager</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>FileSelector</Title>
-<Para>
-<Literal>FileSelector</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>FileSelectorItem</Title>
-<Para>
-<Literal>FileSelectorItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>FontDatabase</Title>
-<Para>
-<Literal>FontDatabase</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>Global</Title>
-<FuncSynopsis>
-	<FuncDef>static void <Function>setBuiltinCommands</Function></FuncDef>
-	<ParamDef>Command *</ParamDef>
-</FuncSynopsis>
-<Para>
-Not implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>MenuButton</Title>
-<Para>
-<Literal>MenuButton</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCopEnvelope</Title>
-<Para>
-<Literal>TQCopEnvelope</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDawg</Title>
-<Para>
-<Literal>TQDawg</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQPEMenuBar</Title>
-<Para>
-<Literal>TQPEMenuBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQPEToolBar</Title>
-<Para>
-<Literal>TQPEToolBar</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>Resource</Title>
-<Para>
-<Literal>Resource</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-</Sect1>
-<Sect1><Title><Literal>qtsql</Literal> Module Reference</Title>
-<Sect2><Title>TQDataBrowser (TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual void <Function>del</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delOnCursor</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQDataTable (TQt v3+)</Title>
-<Para>
-<Literal>TQDataTable</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQDataView (TQt v3+)</Title>
-<Para>
-<Literal>TQDataView</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQEditorFactory (TQt v3+)</Title>
-<Para>
-<Literal>TQEditorFactory</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSql (TQt v3+)</Title>
-<Para>
-<Literal>TQSql</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlCursor (TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef>virtual int <Function>del</Function></FuncDef>
-	<ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delRecords</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>virtual int <Function>del</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>filter</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delRecords</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>exec</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>query</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>execQuery</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlDatabase (TQt v3+)</Title>
-<FuncSynopsis>
-        <FuncDef>TQSqlQuery <Function>exec</Function></FuncDef>
-        <ParamDef>const TQString &amp;<Parameter>query</Parameter> = TQString::null</ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>execStatement</Literal> in Python.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlDriver (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlDriver</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlEditorFactory (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlEditorFactory</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlError (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlError</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlField (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlField</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQSqlFieldInfo (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlFieldInfo</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlForm (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlForm</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlIndex (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlIndex</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlPropertyMap (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlPropertyMap</Literal> is fully implemented. However, because PyTQt
-does not allow new properties to be defined, it is not possible to implement
-custom editor widgets in Python and add them to a property map. These will
-simply be ignored.
-</Para>
-
-<Para>
-This problem may be addressed in a future release of PyTQt.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlQuery (TQt v3+)</Title>
-<FuncSynopsis>
-	<FuncDef>TQMap&lt;TQString,TQVariant&gt; <Function>boundValues</Function> const</FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.  (TQt v3.2.0+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>virtual bool <Function>exec</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>query</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>execQuery</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>exec</Function></FuncDef>
-	<ParamDef></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>execQuery</Literal> in Python. (TQt v3.1+)
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlRecord (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlRecord</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQSqlRecordInfo (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlRecordInfo</Literal> is implemented as a Python list of
-<Literal>TQSqlFieldInfo</Literal> instances.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlResult (TQt v3+)</Title>
-<Para>
-<Literal>TQSqlResult</Literal> is fully implemented.
-</Para>
-</Sect2>
-<Sect2><Title>TQSqlSelectCursor (TQt v3.2.0+)</Title>
-<FuncSynopsis>
-	<FuncDef>int <Function>del</Function></FuncDef>
-	<ParamDef>bool <Parameter>invalidate</Parameter> = TRUE</ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>delRecords</Literal> in Python.
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>exec</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>query</Parameter></ParamDef>
-</FuncSynopsis>
-<Para>
-This has been renamed <Literal>execQuery</Literal> in Python.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qttable</Literal> Module Reference</Title>
-<Sect2><Title>TQTable (TQt v2.2+)</Title>
-<Para>
-<Literal>TQTable</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTableItem (TQt v2.2+)</Title>
-<Para>
-<Literal>TQTableItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQCheckTableItem (TQt v3+)</Title>
-<Para>
-<Literal>TQCheckTableItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQComboTableItem (TQt v3+)</Title>
-<Para>
-<Literal>TQComboTableItem</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQTableSelection (TQt v2.2+)</Title>
-<Para>
-<Literal>TQTableSelection</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtui</Literal> Module Reference</Title>
-<Sect2><Title>TQWidgetFactory (TQt v3+)</Title>
-<Para>
-<Literal>TQWidgetFactory</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-<Sect1><Title><Literal>qtxml</Literal> Module Reference</Title>
-<Sect2><Title>TQDomImplementation (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomImplementation</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomNode (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomNode</Literal> is fully implemented, including the Python
-<Literal>==</Literal> and <Literal>!=</Literal> operators.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomNodeList (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomNodeList</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomDocument (TQt v2.2+)</Title>
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQCString &amp;<Parameter>buffer</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>buffer</Literal> and
-<Literal>namespaceProcessing</Literal> parameters and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQByteArray &amp;<Parameter>buffer</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>buffer</Literal> and
-<Literal>namespaceProcessing</Literal> parameters and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>text</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>text</Literal> and
-<Literal>namespaceProcessing</Literal> parameters and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQIODevice *<Parameter>dev</Parameter></ParamDef>
-	<ParamDef>bool <Parameter>namespaceProcessing</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>dev</Literal> and
-<Literal>namespaceProcessing</Literal> parameters and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQCString &amp;<Parameter>buffer</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>buffer</Literal> parameter only and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQByteArray &amp;<Parameter>buffer</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>buffer</Literal> parameter only and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQString &amp;<Parameter>text</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>text</Literal> parameter only and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>const TQIODevice *<Parameter>dev</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-This takes the <Literal>dev</Literal> parameter only and returns a tuple
-containing the <Literal>bool</Literal> result and the
-<Literal>errorMsg</Literal>, <Literal>errorLine</Literal> and
-<Literal>errorColumn</Literal> values.  (TQt v3+)
-</Para>
-
-<FuncSynopsis>
-	<FuncDef>bool <Function>setContent</Function></FuncDef>
-	<ParamDef>TQXmlInputSource *<Parameter>source</Parameter></ParamDef>
-	<ParamDef>TQXmlReader *<Parameter>reader</Parameter></ParamDef>
-	<ParamDef>TQString *<Parameter>errorMsg</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorLine</Parameter> = 0</ParamDef>
-	<ParamDef>int *<Parameter>errorColumn</Parameter> = 0</ParamDef>
-</FuncSynopsis>
-<Para>
-Not yet implemented.  (TQt v3.2.0+)
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomDocumentFragment (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomDocumentFragment</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomDocumentType (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomDocumentType</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomNamedNodeMap (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomNamedNodeMap</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomCharacterData (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomCharacterData</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomAttr (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomAttr</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomElement (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomElement</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomText (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomText</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomComment (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomComment</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomCDATASection (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomCDATASection</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomNotation (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomNotation</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomEntity (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomEntity</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomEntityReference (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomEntityReference</Literal> is fully implemented.
-</Para>
-</Sect2>
-
-<Sect2><Title>TQDomProcessingInstruction (TQt v2.2+)</Title>
-<Para>
-<Literal>TQDomProcessingInstruction</Literal> is fully implemented.
-</Para>
-</Sect2>
-</Sect1>
-</Article>