Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 96 insertions, 88 deletions

diff --git a/tde-i18n-ga/messages/tdeadmin/kcmlilo.po b/tde-i18n-ga/messages/tdeadmin/kcmlilo.po
index e8e8488c8c8..ae6aeea1dcb 100644
--- a/tde-i18n-ga/messages/tdeadmin/kcmlilo.po
+++ b/tde-i18n-ga/messages/tdeadmin/kcmlilo.po
@@ -1,7 +1,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdeadmin/kcmlilo.po\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-13 14:15+0100\n"
 "PO-Revision-Date: 2004-12-03 14:52-0500\n"
 "Last-Translator: Kevin Patrick Scannell <[email protected]>\n"
 "Language-Team: ga <[email protected]>\n"
@@ -10,6 +10,18 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Séamus Ó Ciardhuáin,Kevin Scannell"
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "seoc at iolfree dot ie,scannell at slu dot edu"
+
 #: kde-qt-common/EditWidget.cpp:43
 msgid "Select..."
 msgstr "Roghnaigh..."
@@ -26,12 +38,11 @@ msgstr ""
 
 #: kde-qt-common/general.cpp:55
 msgid ""
-"Select the drive or partition you want to install the LILO boot loader to here. "
-"Unless you intend to use other boot managers in addition to LILO, this should "
-"be the MBR (master boot record) of your boot drive."
-"<br>In this case, you should probably select <i>/dev/hda</i> "
-"if your boot drive is an IDE drive or <i>/dev/sda</i> "
-"if your boot drive is SCSI."
+"Select the drive or partition you want to install the LILO boot loader to "
+"here. Unless you intend to use other boot managers in addition to LILO, this "
+"should be the MBR (master boot record) of your boot drive.<br>In this case, "
+"you should probably select <i>/dev/hda</i> if your boot drive is an IDE "
+"drive or <i>/dev/sda</i> if your boot drive is SCSI."
 msgstr ""
 
 #: kde-qt-common/general.cpp:58
@@ -44,8 +55,8 @@ msgstr "/10 soicind"
 
 #: kde-qt-common/general.cpp:64
 msgid ""
-"LILO will wait the amount of time specified here before booting the kernel (or "
-"OS) marked as <i>default</i> in the <b>Images</b> tab."
+"LILO will wait the amount of time specified here before booting the kernel "
+"(or OS) marked as <i>default</i> in the <b>Images</b> tab."
 msgstr ""
 
 #: kde-qt-common/general.cpp:67
@@ -54,12 +65,11 @@ msgstr "Úsáid an mód &líneach"
 
 #: kde-qt-common/general.cpp:69
 msgid ""
-"Check this box if you want to use the linear mode."
-"<br>Linear mode tells the boot loader the location of kernels in linear "
-"addressing rather than sector/head/cylinder."
-"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
-"you're planning to create a boot disk to be used with a different computer."
-"<br>See the lilo.conf man page for details."
+"Check this box if you want to use the linear mode.<br>Linear mode tells the "
+"boot loader the location of kernels in linear addressing rather than sector/"
+"head/cylinder.<br>linear mode is required for some SCSI drives, and "
+"shouldn't hurt unless you're planning to create a boot disk to be used with "
+"a different computer.<br>See the lilo.conf man page for details."
 msgstr ""
 
 #: kde-qt-common/general.cpp:70
@@ -68,10 +78,10 @@ msgstr "Úsáid an mód dlúth"
 
 #: kde-qt-common/general.cpp:72
 msgid ""
-"Check this box if you want to use the compact mode."
-"<br>The compact mode tries to merge read requests for adjacent sectors into a "
-"single read request. This reduces load time and keeps the boot map smaller, but "
-"will not work on all systems."
+"Check this box if you want to use the compact mode.<br>The compact mode "
+"tries to merge read requests for adjacent sectors into a single read "
+"request. This reduces load time and keeps the boot map smaller, but will not "
+"work on all systems."
 msgstr ""
 
 #: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
@@ -81,8 +91,8 @@ msgstr ""
 #: kde-qt-common/general.cpp:78
 msgid ""
 "Checking this box enables automatic recording of boot command lines as the "
-"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
-"is manually overridden.\n"
+"defaults for the following boots. This way, lilo \"locks\" on a choice until "
+"it is manually overridden.\n"
 "This sets the <b>lock</b> option in lilo.conf."
 msgstr ""
 
@@ -93,12 +103,11 @@ msgstr "&Cúngaigh paraiméadair"
 #: kde-qt-common/general.cpp:82
 msgid ""
 "If this box is checked, a password (entered below) is required only if any "
-"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
-"linux single</i> or <i>linux init=/bin/sh</i>).\n"
-"This sets the <b>restricted</b> option in lilo.conf."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
+"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf.<br>This sets a default "
+"for all Linux kernels you want to boot. If you need a per-kernel setting, go "
+"to the <i>Operating systems</i> tab and select <i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
@@ -111,10 +120,9 @@ msgid ""
 "above is checked, the password is required for additional parameters only."
 "<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
 "You'll want to make sure nobody untrusted can read this file. Also, you "
-"probably don't want to use your normal/root password here."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"probably don't want to use your normal/root password here.<br>This sets a "
+"default for all Linux kernels you want to boot. If you need a per-kernel "
+"setting, go to the <i>Operating systems</i> tab and select <i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:97
@@ -123,13 +131,12 @@ msgstr ""
 
 #: kde-qt-common/general.cpp:100
 msgid ""
-"You can select the default graphics mode here."
-"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
-"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
-"boot time."
-"<br>This sets a default for all Linux kernels you want to boot. If you need a "
-"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
-"Details</i>."
+"You can select the default graphics mode here.<br>If you intend to use a VGA "
+"graphics mode, you must compile the kernel with support for framebuffer "
+"devices. The <i>ask</i> setting brings up a prompt at boot time.<br>This "
+"sets a default for all Linux kernels you want to boot. If you need a per-"
+"kernel setting, go to the <i>Operating systems</i> tab and select "
+"<i>Details</i>."
 msgstr ""
 
 #: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
@@ -244,8 +251,8 @@ msgstr ""
 msgid ""
 "If this box is checked, LILO goes to the LILO prompt whether or not a key is "
 "pressed. If it is turned off, LILO boots the default operating system unless "
-"shift is pressed (in that case, it goes to the LILO prompt)."
-"<br>This sets the <i>prompt</i> option in lilo.conf."
+"shift is pressed (in that case, it goes to the LILO prompt).<br>This sets "
+"the <i>prompt</i> option in lilo.conf."
 msgstr ""
 
 #: kde-qt-common/images.cpp:53
@@ -277,8 +284,8 @@ msgstr "F&réamhchóras comhaid:"
 
 #: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
 msgid ""
-"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
-"time) for the kernel you want to boot here."
+"Enter the root filesystem (i.e. the partition that will be mounted as / at "
+"boot time) for the kernel you want to boot here."
 msgstr ""
 
 #: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
@@ -298,9 +305,8 @@ msgstr "Paraiméadair breise:"
 
 #: kde-qt-common/images.cpp:72
 msgid ""
-"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
-"can be left blank."
-"<br>This sets the <i>append</i> option in lilo.conf."
+"Enter any extra parameters you wish to pass to the kernel here. Usually, "
+"this can be left blank.<br>This sets the <i>append</i> option in lilo.conf."
 msgstr ""
 
 #: kde-qt-common/images.cpp:79
@@ -364,8 +370,7 @@ msgid "Remove entry from the boot menu"
 msgstr ""
 
 #: kde-qt-common/images.cpp:177
-msgid ""
-"Configuration ok. LILO said:\n"
+msgid "Configuration ok. LILO said:\n"
 msgstr ""
 
 #: kde-qt-common/images.cpp:178
@@ -373,8 +378,7 @@ msgid "Configuration OK"
 msgstr ""
 
 #: kde-qt-common/images.cpp:180
-msgid ""
-"Configuration NOT ok. LILO said:\n"
+msgid "Configuration NOT ok. LILO said:\n"
 msgstr ""
 
 #: kde-qt-common/images.cpp:181
@@ -429,10 +433,9 @@ msgstr ""
 
 #: kde/Details.cpp:47 qt/Details.cpp:47
 msgid ""
-"You can select the graphics mode for this kernel here."
-"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
-"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
-"boot time."
+"You can select the graphics mode for this kernel here.<br>If you intend to "
+"use a VGA graphics mode, you must compile the kernel with support for "
+"framebuffer devices. The <i>ask</i> setting brings up a prompt at boot time."
 msgstr ""
 
 #: kde/Details.cpp:75 qt/Details.cpp:76
@@ -442,9 +445,9 @@ msgstr ""
 #: kde/Details.cpp:76 qt/Details.cpp:77
 msgid ""
 "Mount the root filesystem for this kernel read-only. Since the init scripts "
-"normally take care of remounting the root filesystem in read-write mode after "
-"running some checks, this should always be turned on."
-"<br>Don't turn this off unless you know what you're doing."
+"normally take care of remounting the root filesystem in read-write mode "
+"after running some checks, this should always be turned on.<br>Don't turn "
+"this off unless you know what you're doing."
 msgstr ""
 
 #: kde/Details.cpp:78 qt/Details.cpp:80
@@ -453,26 +456,26 @@ msgstr ""
 
 #: kde/Details.cpp:79
 msgid ""
-"This turns off some sanity checks while writing the configuration. This should "
-"not be used under \"normal\" circumstances, but it can be useful, for example, "
-"by providing the capability of booting from a floppy disk, without having a "
-"floppy in the drive every time you run lilo."
-"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+"This turns off some sanity checks while writing the configuration. This "
+"should not be used under \"normal\" circumstances, but it can be useful, for "
+"example, by providing the capability of booting from a floppy disk, without "
+"having a floppy in the drive every time you run lilo.<br>This sets the "
+"<i>unsafe</i> keyword in lilo.conf."
 msgstr ""
 
 #: kde/Details.cpp:83 qt/Details.cpp:86
 msgid ""
 "Checking this box enables automatic recording of boot command lines as the "
-"default for the following bootups. This way, lilo \"locks\" on a choice until "
-"it is manually overridden."
-"<br>This sets the <b>lock</b> option in lilo.conf"
+"default for the following bootups. This way, lilo \"locks\" on a choice "
+"until it is manually overridden.<br>This sets the <b>lock</b> option in lilo."
+"conf"
 msgstr ""
 
 #: kde/Details.cpp:86 qt/Details.cpp:89
 msgid ""
 "If this box is checked, a password (entered below) is required only if any "
-"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
-"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
+"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
 "This sets the <b>restricted</b> option in lilo.conf."
 msgstr ""
 
@@ -500,10 +503,19 @@ msgstr ""
 #: qt/Details.cpp:81
 msgid ""
 "This turns off some sanity checks while writing the configuration. This "
-"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
-"for installing the possibility to boot from a floppy disk without having a "
-"floppy in the drive every time you run lilo."
-"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+"shouldn't be used under \"normal\" circumstances, but it's useful, for "
+"example, for installing the possibility to boot from a floppy disk without "
+"having a floppy in the drive every time you run lilo.<br>This sets the "
+"<i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+
+#: qt/Details.cpp:102 qt/InputBox.cpp:47 qt/InputBox.cpp:52
+#: qt/standalone.cpp:58
+msgid "&OK"
+msgstr ""
+
+#: qt/Details.cpp:103 qt/InputBox.cpp:48 qt/standalone.cpp:61
+msgid "&Cancel"
 msgstr ""
 
 #: qt/standalone.cpp:41
@@ -512,16 +524,20 @@ msgstr "&Cad É Seo?"
 
 #: qt/standalone.cpp:43
 msgid ""
-"The <i>What's This?</i> button is part of this program's help system. Click on "
-"the What's This? button then on any widget in the window to get information "
-"(like this) on it."
+"The <i>What's This?</i> button is part of this program's help system. Click "
+"on the What's This? button then on any widget in the window to get "
+"information (like this) on it."
+msgstr ""
+
+#: qt/standalone.cpp:45
+msgid "&Help"
 msgstr ""
 
 #: qt/standalone.cpp:47
 msgid ""
-"This button calls up the program's online help system. If it does nothing, no "
-"help file has been written (yet); in that case, use the <i>What's This</i> "
-"button on the left."
+"This button calls up the program's online help system. If it does nothing, "
+"no help file has been written (yet); in that case, use the <i>What's This</"
+"i> button on the left."
 msgstr ""
 
 #: qt/standalone.cpp:49
@@ -543,6 +559,10 @@ msgid ""
 "program."
 msgstr ""
 
+#: qt/standalone.cpp:55
+msgid "&Apply"
+msgstr ""
+
 #: qt/standalone.cpp:56
 msgid "This button saves all your changes without exiting."
 msgstr ""
@@ -554,15 +574,3 @@ msgstr ""
 #: qt/standalone.cpp:62
 msgid "This button exits the program without saving your changes."
 msgstr ""
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Séamus Ó Ciardhuáin,Kevin Scannell"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "seoc at iolfree dot ie,scannell at slu dot edu"