Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

(cherry picked from commit da09f211a04674f2d78dbbbf493e08bcffd2bb7a)

1 files changed, 326 insertions, 342 deletions

diff --git a/tde-i18n-rw/messages/tdenetwork/kcmlanbrowser.po b/tde-i18n-rw/messages/tdenetwork/kcmlanbrowser.po
index b90312547a6..b5b16aa35a2 100644
--- a/tde-i18n-rw/messages/tdenetwork/kcmlanbrowser.po
+++ b/tde-i18n-rw/messages/tdenetwork/kcmlanbrowser.po
@@ -15,7 +15,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmlanbrowser 3.4\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-20 01:34+0100\n"
 "PO-Revision-Date: 2005-05-25 18:37-0600\n"
 "Last-Translator: Steve Murphy <[email protected]>\n"
 "Language-Team: Kinyarwanda <[email protected]>\n"
@@ -24,325 +24,48 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: setupwizard.cpp:63
-msgid "LISa Network Neighborhood Setup"
-msgstr ""
-
-#: setupwizard.cpp:71 setupwizard.cpp:512
-msgid "Advanced Settings"
-msgstr "Amagenamiterere Ahanitse"
-
-#: setupwizard.cpp:126
-#, fuzzy
-msgid ""
-"<qt>"
-"<p>This wizard will ask you a few questions about your network.</p> "
-"<p>Usually you can simply keep the suggested settings.</p> "
-"<p>After you have finished the wizard, you will be able to browse and use "
-"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP "
-"and NFS resources exactly the same way.</p> "
-"<p>Therefore you need to setup the <i>LAN Information Server</i> "
-"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it "
-"has to be run by root, it should be started during the boot process and only "
-"one LISa server can run on one machine.</qt>"
-msgstr ""
-"<qt> "
-"<p> ask A Bigyanye urusobe . </p> "
-"<p> Gumana: i Igenamiterere . </p> "
-"<p> Byarangiye i , Kuri Gushakisha na Koresha Bisangiwe Ibikorana ku , OYA /, , "
-"na Ibikorana i . </p> "
-"<p> Kuri Imikorere i <i> </i> ( ) ku Imashini: . Bya i Seriveri: Nka Cyangwa "
-"Seriveri: ; Kuri Gukoresha ku Imizi , Yatangiye: i na Rimwe Seriveri: Gukoresha "
-"ku Rimwe Imashini: . </qt> "
-
-#: setupwizard.cpp:149
-#, fuzzy
-msgid ""
-"<qt>"
-"<p>More than one network interface card was found on your system.</p>"
-"<p>Please choose the one to which your LAN is connected.</p></qt>"
-msgstr ""
-"<qt> "
-"<p> Rimwe urusobe Imigaragarire Byabonetse ku Sisitemu . </p> "
-"<p> Hitamo... i Rimwe Kuri ni . </p> </qt> "
-
-#: setupwizard.cpp:164
-#, fuzzy
-msgid ""
-"<qt>"
-"<p><b>No network interface card was found on your system.</b></p>"
-"<p>Possible reason: no network card is installed. You probably want to cancel "
-"now or enter your IP address and network manually</p>Example: <code>"
-"192.168.0.1/255.255.255.0</code>.</qt>"
-msgstr "<qt><p><b>168. 0%S. 0%S."
-
-#: setupwizard.cpp:185
-#, fuzzy
-msgid "There are two ways LISa can search hosts on your network."
-msgstr "Kabiri Shakisha ku urusobe . "
-
-#: setupwizard.cpp:187
-#, fuzzy
-msgid "Send pings"
-msgstr "Ohereza amakuru"
-
-#: setupwizard.cpp:188
-#, fuzzy
+#: _translatorinfo:1
 msgid ""
-"All hosts with TCP/IP will respond,"
-"<br>whether or not they are samba servers."
-"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
-"<br>"
-msgstr "e."
-
-#: setupwizard.cpp:191
-msgid "Send NetBIOS broadcasts"
+"_: NAME OF TRANSLATORS\n"
+"Your names"
 msgstr ""
 
-#: setupwizard.cpp:192
-#, fuzzy
+#: _translatorinfo:2
 msgid ""
-"You need to have the samba package (nmblookup) installed."
-"<br>Only samba/windows servers will respond."
-"<br>This method is not very reliable."
-"<br>You should enable it if you are part of a large network."
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
 msgstr ""
-"Kuri i Porogaramu ( ) yakorewe iyinjizaporogaramu . "
-"<br> /Windows Amaseriveri . "
-"<br> Uburyo ni OYA . "
-"<br> Gushoboza NIBA Inzira %s Bya A Kinini urusobe . "
-
-#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
-#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
-#, fuzzy
-msgid "<b>If unsure, keep it as is.</b>"
-msgstr "<b> , Gumana: Nka ni . </b> "
 
-#: setupwizard.cpp:210
-#, fuzzy
-msgid ""
-"All IP addresses included in the specified range will be pinged."
-"<br>If you are part of a small network, e.g. with network mask 255.255.255.0"
-"<br>use your IP address/network mask."
-"<br>"
-msgstr "G."
-
-#: setupwizard.cpp:215
-#, fuzzy
-msgid ""
-"<br>There are four ways to specify address ranges:"
-"<br>1. IP address/network mask, like <code>192.168.0.0/255.255.255.0;</code>"
-"<br>2. single IP addresses, like <code>10.0.0.23;</code>"
-"<br>3. continuous ranges, like <code>10.0.1.0-10.0.1.200;</code>"
-"<br>4. ranges for each part of the address, like <code>"
-"10-10.1-5.1-25.1-3;</code>"
-"<br>You can also enter combinations of 1 to 4, separated by \";\", like"
-"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
-"<br>"
-msgstr ""
-"<br>168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. 1. 15. 168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. 1."
-
-#: setupwizard.cpp:236
-#, fuzzy
-msgid ""
-"This is a security related setting."
-"<br>It provides a simple IP address based way to specify \"trusted\" hosts."
-"<br>Only hosts which fit into the addresses given here are accepted by LISa as "
-"clients. The list of hosts published by LISa will also only contain hosts which "
-"fit into this scheme."
-"<br>Usually you enter your IP address/network mask here."
-msgstr ""
-"ni A Umutekano Igenamiterere . "
-"<br> A Byoroheje Aderesi: Kuri Kugaragaza \" \" . "
-"<br> i Amaderesi Byemewe ku Nka . Urutonde Bya ku iyi Igishusho . "
-"<br> Injiza Aderesi: /urusobe . "
-
-#: setupwizard.cpp:258
-#, fuzzy
-msgid ""
-"<br>Enter your IP address and network mask here, like <code>"
-"192.168.0.1/255.255.255.0</code>"
-msgstr "<br>168. 0%S."
-
-#: setupwizard.cpp:261
-#, fuzzy
-msgid ""
-"<br>To reduce the network load, the LISa servers in one network"
-"<br>cooperate with each other. Therefore you have to enter the broadcast"
-"<br>address here. If you are connected to more than one network, choose "
-"<br>one of the broadcast addresses."
-msgstr ""
-"<br> i urusobe Ibirimo , i Amaseriveri in Rimwe urusobe "
-"<br> Na: Ikindi . Kuri Injiza i "
-"<br> Aderesi: . Kuri Birenzeho Rimwe urusobe , Hitamo... "
-"<br> Rimwe Bya i Amaderesi . "
-
-#: setupwizard.cpp:280
-#, fuzzy
-msgid ""
-"<br>Enter the interval after which LISa, if busy, will update its host list."
-msgstr "<br> i Intera Nyuma , NIBA Irahuze , Ihuzagihe Inturo: Urutonde . "
-
-#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
-msgid " sec"
-msgstr " sec"
-
-#: setupwizard.cpp:286
-#, fuzzy
-msgid ""
-"<br>Please note that the update interval will grow automatically by up to 16 "
-"times the value you enter here, if nobody accesses the LISa server. So if you "
-"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole "
-"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min."
-msgstr ""
-"<br> Impugukirwa i Ihuzagihe Intera mu buryo bwikora: ku Hejuru Kuri 16 Times i "
-"Agaciro: Injiza , NIBA Nta numwe i Seriveri: . NIBA Injiza 300 Sec. = 5 GITO , "
-"iyi OYA Impuzandengo -  urusobe buri 5 iminota . Intera Kwongeraho Hejuru Kuri "
-"16 x 5 GITO = GITO . "
-
-#: setupwizard.cpp:305
-#, fuzzy
-msgid ""
-"This page contains several settings you usually only"
-"<br>need if LISa doesn't find all hosts in your network."
-msgstr "Ipaji: ifite Igenamiterere <br> NIBA Gushaka Byose in urusobe . "
-
-#: setupwizard.cpp:308
-#, fuzzy
-msgid "Re&port unnamed hosts"
-msgstr "Kitiswe "
-
-#: setupwizard.cpp:309
-#, fuzzy
-msgid ""
-"Should hosts for which LISa can't resolve the name be included in the host "
-"list?"
-"<br>"
-msgstr "ya:  i Izina: in i Inturo: Urutonde ? <br> "
-
-#: setupwizard.cpp:313
-#, fuzzy
-msgid "Wait for replies after first scan"
-msgstr "ya:  Nyuma Itangira Gusikana "
-
-#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
-#: setupwizard.cpp:315 setupwizard.cpp:333
-#, fuzzy
-msgid " ms"
-msgstr "ms"
-
-#: setupwizard.cpp:316
-#, fuzzy
-msgid ""
-"How long should LISa wait for answers to pings?"
-"<br>If LISa doesn't find all hosts, try to increase this value."
-"<br>"
-msgstr ""
-"Birebire Tegereza ya:  Kuri ? "
-"<br> Gushaka Byose , Kugerageza Kuri Kwongeraho iyi Agaciro: . "
-
-#: setupwizard.cpp:320
-#, fuzzy
-msgid "Max. number of pings to send at once"
-msgstr ". Umubare Bya Kuri Kohereza Ku Rimwe "
-
-#: setupwizard.cpp:323
-#, fuzzy
-msgid ""
-"How many ping packets should LISa send at once?"
-"<br>If LISa doesn't find all hosts you could try to decrease this value."
-"<br>"
-msgstr ""
-"Amapaki Kohereza Ku Rimwe ? "
-"<br> Gushaka Byose Kugerageza Kuri Kugabanya iyi Agaciro: . "
-"<br> "
-
-#: setupwizard.cpp:326
-#, fuzzy
-msgid "Al&ways scan twice"
-msgstr "Gusikana "
-
-#: setupwizard.cpp:330
-#, fuzzy
-msgid "Wait for replies after second scan"
-msgstr "ya:  Nyuma ISEGONDA Gusikana "
-
-#: setupwizard.cpp:334
-#, fuzzy
-msgid "If LISa doesn't find all hosts, enable this option."
-msgstr "Gushaka Byose , Gushoboza iyi Ihitamo . "
-
-#: setupwizard.cpp:350
-#, fuzzy
-msgid ""
-"<br>Your LAN browsing has been successfully set up."
-"<br>"
-"<br>Make sure that the LISa server is started during the boot process. How this "
-"is done depends on your distribution and OS. Usually you have to insert it "
-"somewhere in a boot script under <code>/etc</code>."
-"<br>Start the LISa server as root and without any command line options."
-"<br>The config file will now be saved to <code>/etc/lisarc</code>."
-"<br>To test the server, try <code>lan:/</code> in Konqueror."
-"<br>"
-"<br>If you have problems or suggestions, visit "
-"http://lisa-home.sourceforge.net."
-msgstr "<br>net."
-
-#: setupwizard.cpp:437
-msgid "Congratulations!"
-msgstr "Nibyiza!"
-
-#: setupwizard.cpp:462
-#, fuzzy
-msgid "You can use the same syntax as on the previous page.<br>"
-msgstr "Koresha i Nka ku i Ibanjirije Ipaji: . <br> "
-
-#: setupwizard.cpp:464
-#, fuzzy
-msgid ""
-"There are three ways to specify IP addresses:"
-"<br>1. IP address/network mask, like<code> 192.168.0.0/255.255.255.0;</code>"
-"<br>2. continuous ranges, like<code> 10.0.1.0-10.0.1.200;</code>"
-"<br>3. single IP addresses, like<code> 10.0.0.23;</code>"
-"<br>You can also enter combinations of 1 to 3, separated by \";\", "
-"<br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
-"<br>"
-msgstr ""
-"168. 0%S. 0%S. 1. 0%S. 1. 0%S. 0%S. 168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. 1."
+#: findnic.cpp:107 findnic.cpp:174
+msgid "Up"
+msgstr "Hejuru"
 
-#: setupwizard.cpp:490
-#, fuzzy
-msgid "Multiple Network Interfaces Found"
-msgstr "Name=Imigaragarire y'Urusobemiyoboro"
+#: findnic.cpp:109 findnic.cpp:176
+msgid "Down"
+msgstr "Hasi"
 
-#: setupwizard.cpp:493
+#: findnic.cpp:112 findnic.cpp:280
 #, fuzzy
-msgid "No Network Interface Found"
-msgstr "Name=Imigaragarire y'Urusobemiyoboro"
+msgid "Broadcast"
+msgstr "Braodway"
 
-#: setupwizard.cpp:498
+#: findnic.cpp:114 findnic.cpp:273
 #, fuzzy
-msgid "Specify Search Method"
-msgstr "Garagaza izina ry'ukoresha"
-
-#: setupwizard.cpp:501
-msgid "Specify Address Range LISa Will Ping"
-msgstr ""
+msgid "Point to Point"
+msgstr "Kuri "
 
-#: setupwizard.cpp:504
-#, fuzzy
-msgid "\"Trusted\" Hosts"
-msgstr "Ama webu yizewe"
+#: findnic.cpp:117 findnic.cpp:287
+msgid "Multicast"
+msgstr "Isakaza ryihariye"
 
-#: setupwizard.cpp:507
+#: findnic.cpp:120 findnic.cpp:294
 #, fuzzy
-msgid "Your Broadcast Address"
-msgstr "Kubuganya aderesi"
+msgid "Loopback"
+msgstr "Guporora inyuma"
 
-#: setupwizard.cpp:510
-#, fuzzy
-msgid "LISa Update Interval"
-msgstr "Kuvugurura intera:"
+#: findnic.cpp:122 findnic.cpp:134
+msgid "Unknown"
+msgstr "Kitazwi"
 
 #: kcmlisa.cpp:63
 #, fuzzy
@@ -445,6 +168,10 @@ msgstr "Urutonde Ihuzagihe Intera : "
 msgid "Search hosts after this number of seconds"
 msgstr "Nyuma iyi Umubare Bya amasogonda "
 
+#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
+msgid " sec"
+msgstr " sec"
+
 #: kcmlisa.cpp:141 kcmreslisa.cpp:103
 #, fuzzy
 msgid "Always check twice for hosts when searching"
@@ -461,6 +188,12 @@ msgstr "ya:  Kuva: Nyuma Itangira Gusikana : "
 msgid "How long to wait for replies to the ICMP echo requests from hosts"
 msgstr "Birebire Kuri Tegereza ya:  Kuri i Kuva: "
 
+#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
+#: setupwizard.cpp:315 setupwizard.cpp:333
+#, fuzzy
+msgid " ms"
+msgstr "ms"
+
 #: kcmlisa.cpp:150 kcmreslisa.cpp:112
 #, fuzzy
 msgid "Wait for replies from hosts after second scan:"
@@ -484,19 +217,12 @@ msgstr "urusobe Imigaragarire Byabonetse . "
 #: kcmlisa.cpp:332 kcmreslisa.cpp:232
 #, fuzzy
 msgid ""
-"You have more than one network interface installed."
-"<br>Please make sure the suggested settings are correct."
-"<br>"
-"<br>The following interfaces were found:"
-"<br>"
-"<br>"
+"You have more than one network interface installed.<br>Please make sure the "
+"suggested settings are correct.<br><br>The following interfaces were found:"
+"<br><br>"
 msgstr ""
-"Birenzeho Rimwe urusobe Imigaragarire yakorewe iyinjizaporogaramu . "
-"<br> Ubwoko i Igenamiterere . "
-"<br> "
-"<br> Imigaragarire Byabonetse : "
-"<br> "
-"<br> "
+"Birenzeho Rimwe urusobe Imigaragarire yakorewe iyinjizaporogaramu . <br> "
+"Ubwoko i Igenamiterere . <br> <br> Imigaragarire Byabonetse : <br> <br> "
 
 #: kcmlisa.cpp:381
 #, fuzzy
@@ -558,11 +284,11 @@ msgstr ""
 #: kcmreslisa.cpp:242
 #, fuzzy
 msgid ""
-"The ResLISa daemon is now configured correctly, hopefully."
-"<br>Make sure that the reslisa binary is installed <i>suid root</i>."
+"The ResLISa daemon is now configured correctly, hopefully.<br>Make sure that "
+"the reslisa binary is installed <i>suid root</i>."
 msgstr ""
-"Dayimoni ni NONEAHA , . "
-"<br> i Nyabibiri ni yakorewe iyinjizaporogaramu <i> Imizi </i> . "
+"Dayimoni ni NONEAHA , . <br> i Nyabibiri ni yakorewe iyinjizaporogaramu <i> "
+"Imizi </i> . "
 
 #: kcmtdeiolan.cpp:41
 #, fuzzy
@@ -617,33 +343,291 @@ msgstr "Buri gihe"
 msgid "Never"
 msgstr "Nta narimwe"
 
-#: findnic.cpp:107 findnic.cpp:174
-msgid "Up"
-msgstr "Hejuru"
+#: setupwizard.cpp:63
+msgid "LISa Network Neighborhood Setup"
+msgstr ""
 
-#: findnic.cpp:109 findnic.cpp:176
-msgid "Down"
-msgstr "Hasi"
+#: setupwizard.cpp:71 setupwizard.cpp:512
+msgid "Advanced Settings"
+msgstr "Amagenamiterere Ahanitse"
 
-#: findnic.cpp:112 findnic.cpp:280
+#: setupwizard.cpp:126
 #, fuzzy
-msgid "Broadcast"
-msgstr "Braodway"
+msgid ""
+"<qt><p>This wizard will ask you a few questions about your network.</p> "
+"<p>Usually you can simply keep the suggested settings.</p> <p>After you have "
+"finished the wizard, you will be able to browse and use shared resources on "
+"your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS "
+"resources exactly the same way.</p> <p>Therefore you need to setup the "
+"<i>LAN Information Server</i> (LISa) on your machine. Think of the LISa "
+"server as an FTP or HTTP server; it has to be run by root, it should be "
+"started during the boot process and only one LISa server can run on one "
+"machine.</qt>"
+msgstr ""
+"<qt> <p> ask A Bigyanye urusobe . </p> <p> Gumana: i Igenamiterere . </p> "
+"<p> Byarangiye i , Kuri Gushakisha na Koresha Bisangiwe Ibikorana ku , "
+"OYA /, , na Ibikorana i . </p> <p> Kuri Imikorere i <i> </i> ( ) ku "
+"Imashini: . Bya i Seriveri: Nka Cyangwa Seriveri: ; Kuri Gukoresha ku "
+"Imizi , Yatangiye: i na Rimwe Seriveri: Gukoresha ku Rimwe Imashini: . </qt> "
 
-#: findnic.cpp:114 findnic.cpp:273
+#: setupwizard.cpp:149
 #, fuzzy
-msgid "Point to Point"
-msgstr "Kuri "
+msgid ""
+"<qt><p>More than one network interface card was found on your system.</"
+"p><p>Please choose the one to which your LAN is connected.</p></qt>"
+msgstr ""
+"<qt> <p> Rimwe urusobe Imigaragarire Byabonetse ku Sisitemu . </p> <p> "
+"Hitamo... i Rimwe Kuri ni . </p> </qt> "
 
-#: findnic.cpp:117 findnic.cpp:287
-msgid "Multicast"
-msgstr "Isakaza ryihariye"
+#: setupwizard.cpp:164
+#, fuzzy
+msgid ""
+"<qt><p><b>No network interface card was found on your system.</b></"
+"p><p>Possible reason: no network card is installed. You probably want to "
+"cancel now or enter your IP address and network manually</p>Example: "
+"<code>192.168.0.1/255.255.255.0</code>.</qt>"
+msgstr "<qt><p><b>168. 0%S. 0%S."
 
-#: findnic.cpp:120 findnic.cpp:294
+#: setupwizard.cpp:185
 #, fuzzy
-msgid "Loopback"
-msgstr "Guporora inyuma"
+msgid "There are two ways LISa can search hosts on your network."
+msgstr "Kabiri Shakisha ku urusobe . "
 
-#: findnic.cpp:122 findnic.cpp:134
-msgid "Unknown"
-msgstr "Kitazwi"
+#: setupwizard.cpp:187
+#, fuzzy
+msgid "Send pings"
+msgstr "Ohereza amakuru"
+
+#: setupwizard.cpp:188
+#, fuzzy
+msgid ""
+"All hosts with TCP/IP will respond,<br>whether or not they are samba servers."
+"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
+"<br>"
+msgstr "e."
+
+#: setupwizard.cpp:191
+msgid "Send NetBIOS broadcasts"
+msgstr ""
+
+#: setupwizard.cpp:192
+#, fuzzy
+msgid ""
+"You need to have the samba package (nmblookup) installed.<br>Only samba/"
+"windows servers will respond.<br>This method is not very reliable.<br>You "
+"should enable it if you are part of a large network."
+msgstr ""
+"Kuri i Porogaramu ( ) yakorewe iyinjizaporogaramu . <br> /Windows "
+"Amaseriveri . <br> Uburyo ni OYA . <br> Gushoboza NIBA Inzira %s Bya A "
+"Kinini urusobe . "
+
+#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
+#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
+#, fuzzy
+msgid "<b>If unsure, keep it as is.</b>"
+msgstr "<b> , Gumana: Nka ni . </b> "
+
+#: setupwizard.cpp:210
+#, fuzzy
+msgid ""
+"All IP addresses included in the specified range will be pinged.<br>If you "
+"are part of a small network, e.g. with network mask 255.255.255.0<br>use "
+"your IP address/network mask.<br>"
+msgstr "G."
+
+#: setupwizard.cpp:215
+#, fuzzy
+msgid ""
+"<br>There are four ways to specify address ranges:<br>1. IP address/network "
+"mask, like <code>192.168.0.0/255.255.255.0;</code><br>2. single IP "
+"addresses, like <code>10.0.0.23;</code><br>3. continuous ranges, like "
+"<code>10.0.1.0-10.0.1.200;</code><br>4. ranges for each part of the address, "
+"like <code>10-10.1-5.1-25.1-3;</code><br>You can also enter combinations of "
+"1 to 4, separated by \";\", "
+"like<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</"
+"code><br>"
+msgstr ""
+"<br>168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. 1. 15. 168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. "
+"1."
+
+#: setupwizard.cpp:236
+#, fuzzy
+msgid ""
+"This is a security related setting.<br>It provides a simple IP address based "
+"way to specify \"trusted\" hosts.<br>Only hosts which fit into the addresses "
+"given here are accepted by LISa as clients. The list of hosts published by "
+"LISa will also only contain hosts which fit into this scheme.<br>Usually you "
+"enter your IP address/network mask here."
+msgstr ""
+"ni A Umutekano Igenamiterere . <br> A Byoroheje Aderesi: Kuri Kugaragaza \" "
+"\" . <br> i Amaderesi Byemewe ku Nka . Urutonde Bya ku iyi Igishusho . <br> "
+"Injiza Aderesi: /urusobe . "
+
+#: setupwizard.cpp:258
+#, fuzzy
+msgid ""
+"<br>Enter your IP address and network mask here, like "
+"<code>192.168.0.1/255.255.255.0</code>"
+msgstr "<br>168. 0%S."
+
+#: setupwizard.cpp:261
+#, fuzzy
+msgid ""
+"<br>To reduce the network load, the LISa servers in one network<br>cooperate "
+"with each other. Therefore you have to enter the broadcast<br>address here. "
+"If you are connected to more than one network, choose <br>one of the "
+"broadcast addresses."
+msgstr ""
+"<br> i urusobe Ibirimo , i Amaseriveri in Rimwe urusobe <br> Na: Ikindi . "
+"Kuri Injiza i <br> Aderesi: . Kuri Birenzeho Rimwe urusobe , Hitamo... <br> "
+"Rimwe Bya i Amaderesi . "
+
+#: setupwizard.cpp:280
+#, fuzzy
+msgid ""
+"<br>Enter the interval after which LISa, if busy, will update its host list."
+msgstr "<br> i Intera Nyuma , NIBA Irahuze , Ihuzagihe Inturo: Urutonde . "
+
+#: setupwizard.cpp:286
+#, fuzzy
+msgid ""
+"<br>Please note that the update interval will grow automatically by up to 16 "
+"times the value you enter here, if nobody accesses the LISa server. So if "
+"you enter 300 sec = 5 min here, this does not mean that LISa will ping your "
+"whole network every 5 minutes. The interval will increase up to 16 x 5 min = "
+"80 min."
+msgstr ""
+"<br> Impugukirwa i Ihuzagihe Intera mu buryo bwikora: ku Hejuru Kuri 16 "
+"Times i Agaciro: Injiza , NIBA Nta numwe i Seriveri: . NIBA Injiza 300 Sec. "
+"= 5 GITO , iyi OYA Impuzandengo -  urusobe buri 5 iminota . Intera "
+"Kwongeraho Hejuru Kuri 16 x 5 GITO = GITO . "
+
+#: setupwizard.cpp:305
+#, fuzzy
+msgid ""
+"This page contains several settings you usually only<br>need if LISa doesn't "
+"find all hosts in your network."
+msgstr "Ipaji: ifite Igenamiterere <br> NIBA Gushaka Byose in urusobe . "
+
+#: setupwizard.cpp:308
+#, fuzzy
+msgid "Re&port unnamed hosts"
+msgstr "Kitiswe "
+
+#: setupwizard.cpp:309
+#, fuzzy
+msgid ""
+"Should hosts for which LISa can't resolve the name be included in the host "
+"list?<br>"
+msgstr "ya:  i Izina: in i Inturo: Urutonde ? <br> "
+
+#: setupwizard.cpp:313
+#, fuzzy
+msgid "Wait for replies after first scan"
+msgstr "ya:  Nyuma Itangira Gusikana "
+
+#: setupwizard.cpp:316
+#, fuzzy
+msgid ""
+"How long should LISa wait for answers to pings?<br>If LISa doesn't find all "
+"hosts, try to increase this value.<br>"
+msgstr ""
+"Birebire Tegereza ya:  Kuri ? <br> Gushaka Byose , Kugerageza Kuri "
+"Kwongeraho iyi Agaciro: . "
+
+#: setupwizard.cpp:320
+#, fuzzy
+msgid "Max. number of pings to send at once"
+msgstr ". Umubare Bya Kuri Kohereza Ku Rimwe "
+
+#: setupwizard.cpp:323
+#, fuzzy
+msgid ""
+"How many ping packets should LISa send at once?<br>If LISa doesn't find all "
+"hosts you could try to decrease this value.<br>"
+msgstr ""
+"Amapaki Kohereza Ku Rimwe ? <br> Gushaka Byose Kugerageza Kuri Kugabanya iyi "
+"Agaciro: . <br> "
+
+#: setupwizard.cpp:326
+#, fuzzy
+msgid "Al&ways scan twice"
+msgstr "Gusikana "
+
+#: setupwizard.cpp:330
+#, fuzzy
+msgid "Wait for replies after second scan"
+msgstr "ya:  Nyuma ISEGONDA Gusikana "
+
+#: setupwizard.cpp:334
+#, fuzzy
+msgid "If LISa doesn't find all hosts, enable this option."
+msgstr "Gushaka Byose , Gushoboza iyi Ihitamo . "
+
+#: setupwizard.cpp:350
+#, fuzzy
+msgid ""
+"<br>Your LAN browsing has been successfully set up.<br><br>Make sure that "
+"the LISa server is started during the boot process. How this is done depends "
+"on your distribution and OS. Usually you have to insert it somewhere in a "
+"boot script under <code>/etc</code>.<br>Start the LISa server as root and "
+"without any command line options.<br>The config file will now be saved to "
+"<code>/etc/lisarc</code>.<br>To test the server, try <code>lan:/</code> in "
+"Konqueror.<br><br>If you have problems or suggestions, visit http://lisa-"
+"home.sourceforge.net."
+msgstr "<br>net."
+
+#: setupwizard.cpp:437
+msgid "Congratulations!"
+msgstr "Nibyiza!"
+
+#: setupwizard.cpp:462
+#, fuzzy
+msgid "You can use the same syntax as on the previous page.<br>"
+msgstr "Koresha i Nka ku i Ibanjirije Ipaji: . <br> "
+
+#: setupwizard.cpp:464
+#, fuzzy
+msgid ""
+"There are three ways to specify IP addresses:<br>1. IP address/network mask, "
+"like<code> 192.168.0.0/255.255.255.0;</code><br>2. continuous ranges, "
+"like<code> 10.0.1.0-10.0.1.200;</code><br>3. single IP addresses, like<code> "
+"10.0.0.23;</code><br>You can also enter combinations of 1 to 3, separated by "
+"\";\", <br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;"
+"</code><br>"
+msgstr ""
+"168. 0%S. 0%S. 1. 0%S. 1. 0%S. 0%S. 168. 0%S. 0%S. 0%S. 0%S. 1. 0%S. 1."
+
+#: setupwizard.cpp:490
+#, fuzzy
+msgid "Multiple Network Interfaces Found"
+msgstr "Name=Imigaragarire y'Urusobemiyoboro"
+
+#: setupwizard.cpp:493
+#, fuzzy
+msgid "No Network Interface Found"
+msgstr "Name=Imigaragarire y'Urusobemiyoboro"
+
+#: setupwizard.cpp:498
+#, fuzzy
+msgid "Specify Search Method"
+msgstr "Garagaza izina ry'ukoresha"
+
+#: setupwizard.cpp:501
+msgid "Specify Address Range LISa Will Ping"
+msgstr ""
+
+#: setupwizard.cpp:504
+#, fuzzy
+msgid "\"Trusted\" Hosts"
+msgstr "Ama webu yizewe"
+
+#: setupwizard.cpp:507
+#, fuzzy
+msgid "Your Broadcast Address"
+msgstr "Kubuganya aderesi"
+
+#: setupwizard.cpp:510
+#, fuzzy
+msgid "LISa Update Interval"
+msgstr "Kuvugurura intera:"