Update translation files tdegraphics / kghostview

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

(cherry picked from commit 98f46699f9312243d41b0c929ee52624eabf3783)

1 files changed, 143 insertions, 128 deletions

diff --git a/tde-i18n-zh_TW/messages/tdegraphics/kghostview.po b/tde-i18n-zh_TW/messages/tdegraphics/kghostview.po
index 429db8446a0..3e3d8c79049 100644
--- a/tde-i18n-zh_TW/messages/tdegraphics/kghostview.po
+++ b/tde-i18n-zh_TW/messages/tdegraphics/kghostview.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kghostview\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-21 14:29+0100\n"
 "PO-Revision-Date: 2006-06-09 11:22+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -19,19 +19,19 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.2\n"
 
-#: _translatorinfo.cpp:1
+#: _translatorinfo:1
 msgid ""
 "_: NAME OF TRANSLATORS\n"
 "Your names"
 msgstr "Chou Yeh-Jyi,Edward G.J. Lee,Frank Weng (a.k.a. Franklin)"
 
-#: _translatorinfo.cpp:3
+#: _translatorinfo:2
 msgid ""
 "_: EMAIL OF TRANSLATORS\n"
 "Your emails"
 msgstr ""
-"[email protected],[email protected], franklin at goodhorse dot idv "
-"dot tw"
+"[email protected],[email protected], franklin at goodhorse dot "
+"idv dot tw"
 
 #: infodialog.cpp:36
 msgid "Document Information"
@@ -141,6 +141,15 @@ msgstr "避免顫動(&F)"
 msgid "Auto"
 msgstr "自動"
 
+#: kgv_view.cpp:236 viewcontrol.cpp:74
+msgid "Portrait"
+msgstr ""
+
+#: kgv_view.cpp:237 viewcontrol.cpp:75
+#, fuzzy
+msgid "Landscape"
+msgstr "Seascape"
+
 #: kgv_view.cpp:238 viewcontrol.cpp:77
 msgid "Upside Down"
 msgstr "上下反轉"
@@ -149,6 +158,10 @@ msgstr "上下反轉"
 msgid "Seascape"
 msgstr "Seascape"
 
+#: kgv_view.cpp:256
+msgid "Zoom"
+msgstr ""
+
 #: kgv_view.cpp:276
 msgid "&Fit to Page Width"
 msgstr "符合頁寬(&F)"
@@ -272,24 +285,22 @@ msgstr "貢獻 GSView 的 DSC 分析器。"
 
 #: kgv_view.cpp:747
 msgid ""
-"<qt>An error occurred in rendering."
-"<br><strong>%1</strong>"
-"<br>The display may contain errors."
-"<br>Below are any error messages which were received from Ghostscript (<nobr>"
-"<strong>%2</strong></nobr>) which may help you.</qt>"
+"<qt>An error occurred in rendering.<br><strong>%1</strong><br>The display "
+"may contain errors.<br>Below are any error messages which were received from "
+"Ghostscript (<nobr><strong>%2</strong></nobr>) which may help you.</qt>"
 msgstr ""
-"<qt>上色時發生錯誤。"
-"<br> <strong>%1</strong>"
-"<br> 顯示可能會有問題。"
-"<br> 底下是從 Ghostscript 中接收到的錯誤訊息（<nobr><strong>%2</strong></nobr>）。</qt>"
+"<qt>上色時發生錯誤。<br> <strong>%1</strong><br> 顯示可能會有問題。<br> 底下"
+"是從 Ghostscript 中接收到的錯誤訊息（<nobr><strong>%2</strong></nobr>）。</"
+"qt>"
 
 #: kgvconfigdialog.cpp:113
 msgid ""
-"Your version of gs (version %1) is too old, since it has security issues which "
-"are impossible to resolve. Please upgrade to a newer version.\n"
-"KGhostView will try to work with it, but it may not display any files at all.\n"
-"Version %2 seems to be appropriate on your system, although newer versions will "
-"work as well."
+"Your version of gs (version %1) is too old, since it has security issues "
+"which are impossible to resolve. Please upgrade to a newer version.\n"
+"KGhostView will try to work with it, but it may not display any files at "
+"all.\n"
+"Version %2 seems to be appropriate on your system, although newer versions "
+"will work as well."
 msgstr ""
 "你的 gs 版本(%1)太舊，由於有安全上的問題，請更新 gs。\n"
 "KGhostView 將試著使用，但可能無法正確運作。\n"
@@ -307,7 +318,8 @@ msgstr "Ghostscript 設定"
 
 #: kgvdocument.cpp:99
 msgid ""
-"<qt>Could not open <nobr><strong>%1</strong></nobr>: File does not exist.</qt>"
+"<qt>Could not open <nobr><strong>%1</strong></nobr>: File does not exist.</"
+"qt>"
 msgstr "<qt>無法開啟 <nobr><strong>%1</strong></nobr> ：檔案不存在。</qt>"
 
 #: kgvdocument.cpp:108
@@ -326,9 +338,9 @@ msgid ""
 "%2</strong>. KGhostview can only load PostScript (.ps, .eps) and Portable "
 "Document Format (.pdf) files.</qt>"
 msgstr ""
-"<qt>無法開啟 <nobr><strong>%1</strong></nobr>，檔案型態為 <strong>%2</strong>"
-"。KGhostview 只能載入 PostScript (.ps, .eps) 及 Portable Document Format (.pdf) "
-"檔。</qt>"
+"<qt>無法開啟 <nobr><strong>%1</strong></nobr>，檔案型態為 <strong>%2</"
+"strong>。KGhostview 只能載入 PostScript (.ps, .eps) 及 Portable Document "
+"Format (.pdf) 檔。</qt>"
 
 #: kgvdocument.cpp:192 kgvdocument.cpp:223
 msgid "<qt>Could not uncompress <nobr><strong>%1</strong></nobr>.</qt>"
@@ -362,10 +374,14 @@ msgstr "列印發生錯誤"
 
 #: kgvdocument.cpp:537
 msgid ""
-"<qt><strong>Printing failure:</strong>"
-"<br>Could not convert to PostScript</qt>"
+"<qt><strong>Printing failure:</strong><br>Could not convert to PostScript</"
+"qt>"
 msgstr "<qt><strong>列印失敗：</strong><br> 無法轉換成 PostScript</qt>"
 
+#: kgvshell.cpp:78
+msgid "&Reload"
+msgstr ""
+
 #: kgvshell.cpp:82
 msgid "&Maximize"
 msgstr "最大(&M)"
@@ -416,7 +432,9 @@ msgstr "設定 Ghostscipt"
 msgid ""
 "Page to open. Use --page=3 to show the third page, for example. Note that if "
 "the page does not exist, any other page may be displayed"
-msgstr "要開啟的頁數。例如用 --page=3 來顯示第三頁。注意，如果該頁不存在，可能會顯示其他頁。"
+msgstr ""
+"要開啟的頁數。例如用 --page=3 來顯示第三頁。注意，如果該頁不存在，可能會顯示"
+"其他頁。"
 
 #: main.cpp:34
 msgid "Magnification of the display"
@@ -427,7 +445,8 @@ msgid ""
 "The orientation of the shown image. Use either \"auto\", \"portrait\", "
 "\"landscape\", \"upsidedown\" or \"seascape\""
 msgstr ""
-"圖形顯示方向。使用 \"自動\"、\"portrait\"、\"landscape\"、\"upsidedown\" 或 \"seascape\""
+"圖形顯示方向。使用 \"自動\"、\"portrait\"、\"landscape\"、\"upsidedown\" 或 "
+"\"seascape\""
 
 #: main.cpp:36
 msgid "Equivalent to orientation=portrait"
@@ -453,255 +472,251 @@ msgstr "開啟位置"
 msgid "Using this checkbox you can select pages for printing."
 msgstr "可勾選所要列印的頁數。"
 
-#. i18n: file kghostviewui.rc line 40
-#: rc.cpp:3 rc.cpp:18
-#, no-c-format
-msgid "&Main Toolbar"
-msgstr "主工具列(&M)"
+#: marklist.cpp:123
+#, fuzzy
+msgid "Page"
+msgstr "頁數:"
+
+#: viewcontrol.cpp:87
+msgid "&Magnification"
+msgstr "放大(&M)"
 
-#. i18n: file generalsettingswidget.ui line 28
-#: rc.cpp:21
+#: viewcontrol.cpp:98
+msgid "M&edia"
+msgstr "媒體(&E)"
+
+#: generalsettingswidget.ui:28
 #, no-c-format
 msgid "&Enable anti-aliasing of fonts and images"
 msgstr "啟動字體與影像平滑的功能(&E)"
 
-#. i18n: file generalsettingswidget.ui line 31
-#: rc.cpp:24 rc.cpp:67 rc.cpp:73
+#: generalsettingswidget.ui:31 gssettingswidget.ui:110 gssettingswidget.ui:129
 #, no-c-format
 msgid ""
 "Anti-aliasing makes the result look better, but it makes the display take "
 "longer"
-msgstr "啟動平滑功能（Anti-alias，又叫反鋸齒功能）會讓結果看起來好一點，但是要花長一點的時間。"
+msgstr ""
+"啟動平滑功能（Anti-alias，又叫反鋸齒功能）會讓結果看起來好一點，但是要花長一"
+"點的時間。"
 
-#. i18n: file generalsettingswidget.ui line 42
-#: rc.cpp:27
+#: generalsettingswidget.ui:42
 #, no-c-format
 msgid "&Use platform fonts"
 msgstr "使用系統字型(&U)"
 
-#. i18n: file generalsettingswidget.ui line 50
-#: rc.cpp:30
+#: generalsettingswidget.ui:50
 #, no-c-format
 msgid "&Show Ghostscript messages in a separate box"
 msgstr "在另外一個分離對話盒內顯示 Ghostscript 訊息(&S)"
 
-#. i18n: file generalsettingswidget.ui line 54
-#: rc.cpp:33
+#: generalsettingswidget.ui:53
 #, no-c-format
 msgid ""
-"Ghostscript is the basic renderer (the program which draws the picture)"
-"<br>\n"
+"Ghostscript is the basic renderer (the program which draws the picture)<br>\n"
 "In case of problems you might want to see its error messages"
 msgstr ""
-"Ghostscript 是基本的描繪程式（畫出圖片的程式）。"
-"<br>\n"
+"Ghostscript 是基本的描繪程式（畫出圖片的程式）。<br>\n"
 "發生問題時您可能會想看它的錯誤訊息。"
 
-#. i18n: file generalsettingswidget.ui line 62
-#: rc.cpp:37
+#: generalsettingswidget.ui:62
 #, no-c-format
 msgid "Palette"
 msgstr "調色盤"
 
-#. i18n: file generalsettingswidget.ui line 73
-#: rc.cpp:40
+#: generalsettingswidget.ui:73
 #, no-c-format
 msgid "&Monochrome"
 msgstr "單色(&M)"
 
-#. i18n: file generalsettingswidget.ui line 84
-#: rc.cpp:43
+#: generalsettingswidget.ui:84
 #, no-c-format
 msgid "&Grayscale"
 msgstr "灰階(&G)"
 
-#. i18n: file generalsettingswidget.ui line 95
-#: rc.cpp:46
+#: generalsettingswidget.ui:95
 #, no-c-format
 msgid "Co&lor"
 msgstr "彩色(&L)"
 
-#. i18n: file gssettingswidget.ui line 36
-#: rc.cpp:49
+#: gssettingswidget.ui:36
 #, no-c-format
 msgid "Auto Con&figure"
 msgstr "自動設定(&F)"
 
-#. i18n: file gssettingswidget.ui line 61
-#: rc.cpp:52
+#: gssettingswidget.ui:61
 #, no-c-format
 msgid "Settings"
 msgstr "設定"
 
-#. i18n: file gssettingswidget.ui line 72
-#: rc.cpp:55
+#: gssettingswidget.ui:72
 #, no-c-format
 msgid "&Interpreter:"
 msgstr "解譯器(&I)："
 
-#. i18n: file gssettingswidget.ui line 83
-#: rc.cpp:58
+#: gssettingswidget.ui:83
 #, no-c-format
 msgid "Ghostscript is the basic renderer (i.e. the program which draws)"
 msgstr "Ghostscript 是基本的描繪程式。"
 
-#. i18n: file gssettingswidget.ui line 91
-#: rc.cpp:61
+#: gssettingswidget.ui:91
 #, no-c-format
 msgid "(detected gs version: %1)"
 msgstr "(偵測到 gs 版本：%1)"
 
-#. i18n: file gssettingswidget.ui line 99
-#: rc.cpp:64
+#: gssettingswidget.ui:99
 #, no-c-format
 msgid "&Non-antialiasing arguments:"
 msgstr "非平滑功能參數(&N)："
 
-#. i18n: file gssettingswidget.ui line 118
-#: rc.cpp:70
+#: gssettingswidget.ui:118
 #, no-c-format
 msgid "An&tialiasing arguments:"
 msgstr "平滑功能參數(&T)："
 
-#. i18n: file kghostview.kcfg line 9
-#: rc.cpp:76
+#: kghostview.kcfg:9
 #, no-c-format
 msgid "Whether to use anti-aliasing."
 msgstr "決定是否要使用平滑功能（anti-alias）。"
 
-#. i18n: file kghostview.kcfg line 10
-#: rc.cpp:79
+#: kghostview.kcfg:10
 #, no-c-format
 msgid ""
 "Anti-aliasing makes the result look better, specially regarding text, but it "
 "makes the display take longer"
-msgstr "平滑功能（Anti-alias）會讓結果看起來比較好，尤其是文字，但是會花比較長的時間。"
+msgstr ""
+"平滑功能（Anti-alias）會讓結果看起來比較好，尤其是文字，但是會花比較長的時"
+"間。"
 
-#. i18n: file kghostview.kcfg line 20
-#: rc.cpp:82
+#: kghostview.kcfg:20
 #, no-c-format
 msgid "Whether to see a window with Ghostscript messages"
 msgstr "決定是否要看 Ghostscript 訊息視窗。"
 
-#. i18n: file kghostview.kcfg line 21
-#: rc.cpp:85
+#: kghostview.kcfg:21
 #, no-c-format
 msgid ""
-"Whether to see a window with Ghostscript messages. This can give you additional "
-"information on the files you see. In case of an error, a window will popup "
-"regardless of this option."
-msgstr "決定是否要看 Ghostscript 訊息視窗。它能讓您取得更多關於檔案的資訊。如果發生問題的話，這個視窗會跳出來，不管您有沒有設定。"
+"Whether to see a window with Ghostscript messages. This can give you "
+"additional information on the files you see. In case of an error, a window "
+"will popup regardless of this option."
+msgstr ""
+"決定是否要看 Ghostscript 訊息視窗。它能讓您取得更多關於檔案的資訊。如果發生問"
+"題的話，這個視窗會跳出來，不管您有沒有設定。"
 
-#. i18n: file kghostview.kcfg line 25
-#: rc.cpp:88
+#: kghostview.kcfg:25
 #, no-c-format
 msgid "Use Platform Fonts"
 msgstr "使用平台字型(&U)"
 
-#. i18n: file kghostview.kcfg line 30
-#: rc.cpp:91
+#: kghostview.kcfg:30
 #, no-c-format
 msgid "Whether to show the page list"
 msgstr "決定是否顯示頁面列表"
 
-#. i18n: file kghostview.kcfg line 35
-#: rc.cpp:94
+#: kghostview.kcfg:35
 #, no-c-format
 msgid "Whether to show page names instead of numbers"
 msgstr "決定是否顯示頁面名稱而非編號"
 
-#. i18n: file kghostview.kcfg line 36
-#: rc.cpp:97
+#: kghostview.kcfg:36
 #, no-c-format
 msgid ""
-"Sometimes information is available on page names which can be used in the list "
-"panner instead of just the numbers. Most often, these names are, in fact, "
-"another numbering. Often, the first few pages use roman numbering (i, ii, iii, "
-"iv ...) followed by arabic numbers from one (1, 2, 3...) when the real content "
-"starts."
+"Sometimes information is available on page names which can be used in the "
+"list panner instead of just the numbers. Most often, these names are, in "
+"fact, another numbering. Often, the first few pages use roman numbering (i, "
+"ii, iii, iv ...) followed by arabic numbers from one (1, 2, 3...) when the "
+"real content starts."
 msgstr ""
-"有時在頁面清單中可以使用頁面名稱，而不是只顯示編號。通常頁面名稱實際上是另一個編號系統。一般來說，前幾頁介紹、目錄等會用羅馬數字編號（i, ii, iii "
-"等等），書本內容才會用數字編號。"
+"有時在頁面清單中可以使用頁面名稱，而不是只顯示編號。通常頁面名稱實際上是另一"
+"個編號系統。一般來說，前幾頁介紹、目錄等會用羅馬數字編號（i, ii, iii 等等），"
+"書本內容才會用數字編號。"
 
-#. i18n: file kghostview.kcfg line 40
-#: rc.cpp:100
+#: kghostview.kcfg:40
 #, no-c-format
 msgid "Whether to show scroll bars when pages are too big"
 msgstr "決定在頁面太大時是否要顯示捲軸列。"
 
-#. i18n: file kghostview.kcfg line 45
-#: rc.cpp:103
+#: kghostview.kcfg:45
 #, no-c-format
 msgid "Watch File"
 msgstr "監看檔案"
 
-#. i18n: file kghostview.kcfg line 46
-#: rc.cpp:106
+#: kghostview.kcfg:46
 #, no-c-format
 msgid ""
 "If this is on, then the file will be reloaded whenever it changes on disk"
 msgstr "開啟此選項的話，檔案改變時會重新載入"
 
-#. i18n: file kghostview.kcfg line 50
-#: rc.cpp:109
+#: kghostview.kcfg:50
 #, no-c-format
 msgid "Retain document viewing data"
 msgstr ""
 
-#. i18n: file kghostview.kcfg line 51
-#: rc.cpp:112
+#: kghostview.kcfg:51
 #, no-c-format
 msgid "If this is on, then document viewing options are retained"
 msgstr ""
 
-#. i18n: file kghostview.kcfg line 57
-#: rc.cpp:115
+#: kghostview.kcfg:57
 #, no-c-format
 msgid "The ghostscript interpreter to use"
 msgstr "使用的 ghostscript 解譯器"
 
-#. i18n: file kghostview.kcfg line 58
-#: rc.cpp:118
+#: kghostview.kcfg:58
 #, no-c-format
 msgid ""
 "Kghostview does not, itself, display the document: it relies on ghostscript, "
 "and therefore needs it to be available. Here you can define the ghostscript "
 "interpreter to use."
-msgstr "Kghostview 本身不顯示文件。它是依靠 ghostscript。您可以在此定義 ghostscript 使用的解譯器。"
+msgstr ""
+"Kghostview 本身不顯示文件。它是依靠 ghostscript。您可以在此定義 ghostscript "
+"使用的解譯器。"
 
-#. i18n: file kghostview.kcfg line 62
-#: rc.cpp:121
+#: kghostview.kcfg:62
 #, no-c-format
 msgid "Arguments for ghostscript if running with antialiasing"
 msgstr "Ghostscript 執行平滑功能參數"
 
-#. i18n: file kghostview.kcfg line 72
-#: rc.cpp:124
+#: kghostview.kcfg:72
 #, no-c-format
 msgid "This is the ghostscript version you are running"
 msgstr "您所執行的 ghostscript 版本"
 
-#. i18n: file kghostview.kcfg line 73
-#: rc.cpp:127
+#: kghostview.kcfg:73
 #, no-c-format
 msgid ""
-"This is the version of ghostscript you are running. Normally you will not need "
-"to change this since it gets detected automatically."
+"This is the version of ghostscript you are running. Normally you will not "
+"need to change this since it gets detected automatically."
 msgstr "您所執行的 ghostscript 版本。通常您不需要改變這個值，它會自動偵測。"
 
-#. i18n: file kghostview.kcfg line 76
-#: rc.cpp:130
+#: kghostview.kcfg:76
 #, no-c-format
 msgid "This is an internal setting"
 msgstr "這是內部設定"
 
-#: viewcontrol.cpp:87
-msgid "&Magnification"
-msgstr "放大(&M)"
+#: kghostviewui.rc:40 kgv_part.rc:100
+#, no-c-format
+msgid "&Main Toolbar"
+msgstr "主工具列(&M)"
 
-#: viewcontrol.cpp:98
-msgid "M&edia"
-msgstr "媒體(&E)"
+#: kgv_part.rc:58
+#, fuzzy, no-c-format
+msgid "&File"
+msgstr "查看檔案(&W)"
+
+#: kgv_part.rc:62
+#, no-c-format
+msgid "&Edit"
+msgstr ""
+
+#: kgv_part.rc:70
+#, no-c-format
+msgid "&View"
+msgstr ""
+
+#: kgv_part.rc:87
+#, fuzzy, no-c-format
+msgid "&Settings"
+msgstr "設定"
 
 #~ msgid ""
 #~ "_: zoom-factor (percentage)\n"