Add translation templates for tdeutils.

Signed-off-by: Slávek Banko <[email protected]>

1 files changed, 906 insertions, 0 deletions

diff --git a/template/messages/tdeutils/kcmlaptop.pot b/template/messages/tdeutils/kcmlaptop.pot
new file mode 100644
index 00000000000..b43d7966e53
--- /dev/null
+++ b/template/messages/tdeutils/kcmlaptop.pot
@@ -0,0 +1,906 @@
+# SOME DESCRIPTIVE TITLE.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2018-12-25 18:26+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <[email protected]>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+
+#: acpi.cpp:64
+msgid ""
+"This panel provides information about your system's ACPI implementation and "
+"lets you have access to some of the extra features provided by ACPI"
+msgstr ""
+
+#: acpi.cpp:69
+msgid ""
+"NOTE: the Linux ACPI implementation is still a 'work in progress'. Some "
+"features, in particular suspend and hibernate are not yet available under "
+"2.4 - and under 2.5 some particular ACPI implementations are still unstable, "
+"these check boxes let you only enable the things that work reliably. You "
+"should test these features very gingerly - save all your work, check them on "
+"and try a suspend/standby/hibernate from the popup menu on the battery icon "
+"in the panel if it fails to come back successfully uncheck the box again."
+msgstr ""
+
+#: acpi.cpp:79 apm.cpp:77
+msgid ""
+"Some changes made on this page may require you to quit the laptop panel and "
+"start it again to take effect"
+msgstr ""
+
+#: acpi.cpp:85 apm.cpp:83
+msgid "Enable standby"
+msgstr ""
+
+#: acpi.cpp:87 apm.cpp:85
+msgid ""
+"If checked this box enables transitions to the 'standby' state - a temporary "
+"powered down state"
+msgstr ""
+
+#: acpi.cpp:91 apm.cpp:89
+msgid "Enable &suspend"
+msgstr ""
+
+#: acpi.cpp:93 apm.cpp:91
+msgid ""
+"If checked this box enables transitions to the 'suspend' state - a "
+"semi-powered down state, sometimes called 'suspend-to-ram'"
+msgstr ""
+
+#: acpi.cpp:98
+msgid "Enable &hibernate"
+msgstr ""
+
+#: acpi.cpp:100
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state - a powered "
+"down state, sometimes called 'suspend-to-disk'"
+msgstr ""
+
+#: acpi.cpp:105
+msgid "Use software suspend for hibernate"
+msgstr ""
+
+#: acpi.cpp:107
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state - a powered "
+"down state, sometimes called 'suspend-to-disk' - the kernel 'Software "
+"Suspend' mechanism will be used instead of using ACPI directly"
+msgstr ""
+
+#: acpi.cpp:117
+msgid "Enable &performance profiles"
+msgstr ""
+
+#: acpi.cpp:119
+msgid ""
+"If checked this box enables access to ACPI performance profiles - usually OK "
+"in 2.4 and later"
+msgstr ""
+
+#: acpi.cpp:123
+msgid "Enable &CPU throttling"
+msgstr ""
+
+#: acpi.cpp:125
+msgid ""
+"If checked this box enables access to ACPI throttle speed changes - usually "
+"OK in 2.4 and later"
+msgstr ""
+
+#: acpi.cpp:129
+msgid ""
+"If the above boxes are disabled then there is no 'helper' application set up "
+"to help change ACPI states, there are two ways you can enable this "
+"application, either make the file /proc/acpi/sleep writeable by anyone every "
+"time your system boots or use the button below to make the TDE ACPI helper "
+"application set-uid root"
+msgstr ""
+
+#: acpi.cpp:138 apm.cpp:107
+msgid "Setup Helper Application"
+msgstr ""
+
+#: acpi.cpp:140
+msgid "This button can be used to enable the ACPI helper application"
+msgstr ""
+
+#: acpi.cpp:148 apm.cpp:144 buttons.cpp:281 power.cpp:320 profile.cpp:216
+#: sony.cpp:102 warning.cpp:291
+#, c-format
+msgid "Version: %1"
+msgstr ""
+
+#: acpi.cpp:172 apm.cpp:194
+msgid ""
+"You will need to supply a root password to allow the privileges of the "
+"klaptop_acpi_helper to change."
+msgstr ""
+
+#: acpi.cpp:174 acpi.cpp:186 apm.cpp:174 apm.cpp:196 apm.cpp:208 sony.cpp:115
+#: sony.cpp:127
+msgid "KLaptopDaemon"
+msgstr ""
+
+#: acpi.cpp:185
+msgid ""
+"The ACPI helper cannot be enabled because tdesu cannot be found.  Please "
+"make sure that it is installed correctly."
+msgstr ""
+
+#: acpi.cpp:268
+msgid ""
+"<h1>ACPI Setup</h1>This module allows you to configure ACPI for your system"
+msgstr ""
+
+#: apm.cpp:64
+msgid ""
+"This panel lets you configure your APM system and lets you have access to "
+"some of the extra features provided by it"
+msgstr ""
+
+#: apm.cpp:69
+msgid ""
+"NOTE: some APM implementations have buggy suspend/standby implementations. "
+"You should test these features very gingerly - save all your work, check "
+"them on and try a suspend/standby from the popup menu on the battery icon in "
+"the panel if it fails to come back successfully uncheck the box again."
+msgstr ""
+
+#: apm.cpp:98
+msgid ""
+"If the above boxes are disabled then there is no 'helper' application set up "
+"to help change APM states, there are two ways you can enable this "
+"application, either make the file /proc/apm writeable by anyone every time "
+"your system boots or use the button below to make the %1 application set-uid "
+"root"
+msgstr ""
+
+#: apm.cpp:109
+msgid "This button can be used to enable the APM helper application"
+msgstr ""
+
+#: apm.cpp:114
+msgid ""
+"Your system seems to have 'Software Suspend' installed, this can be used to "
+"hibernate or 'suspend to disk' your system if you want to use this for "
+"hibernation check the box below"
+msgstr ""
+
+#: apm.cpp:119
+msgid "Enable software suspend for hibernate"
+msgstr ""
+
+#: apm.cpp:121
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state using the "
+"'Software Suspend' mechanism"
+msgstr ""
+
+#: apm.cpp:124
+msgid ""
+"If the above box is disabled then you need to be logged in as root or need a "
+"helper application to invoke the Software Suspend utility - TDE provides a "
+"utility to do this, if you wish to use it you must make it set-uid root, the "
+"button below will do this for you"
+msgstr ""
+
+#: apm.cpp:132
+msgid "Setup SS Helper Application"
+msgstr ""
+
+#: apm.cpp:134
+msgid ""
+"This button can be used to enable the Software Suspend helper application"
+msgstr ""
+
+#: apm.cpp:160
+msgid ""
+"You will need to supply a root password to allow the privileges of the %1 "
+"application to change."
+msgstr ""
+
+#: apm.cpp:173
+msgid ""
+"%1 cannot be enabled because tdesu cannot be found.  Please make sure that "
+"it is installed correctly."
+msgstr ""
+
+#: apm.cpp:207
+msgid ""
+"The Software Suspend helper cannot be enabled because tdesu cannot be found. "
+" Please make sure that it is installed correctly."
+msgstr ""
+
+#: apm.cpp:271
+msgid ""
+"<h1>APM Setup</h1>This module allows you to configure APM for your system"
+msgstr ""
+
+#: battery.cpp:72
+msgid "&Show battery monitor"
+msgstr ""
+
+#: battery.cpp:74
+msgid "This box enables the battery state icon in the panel"
+msgstr ""
+
+#: battery.cpp:79
+msgid "Show battery level percentage"
+msgstr ""
+
+#: battery.cpp:81
+msgid ""
+"This box enables a text message near the battery state icon containing "
+"battery level percentage"
+msgstr ""
+
+#: battery.cpp:84
+msgid "&Notify me whenever my battery becomes fully charged"
+msgstr ""
+
+#: battery.cpp:86
+msgid ""
+"This box enables a dialog box that pops up when your battery becomes fully "
+"charged"
+msgstr ""
+
+#: battery.cpp:89
+msgid "&Use a blank screen saver when running on battery"
+msgstr ""
+
+#: battery.cpp:103
+msgid "&Check status every:"
+msgstr ""
+
+#: battery.cpp:105
+msgid ""
+"Choose how responsive the laptop software will be when it checks the battery "
+"status"
+msgstr ""
+
+#: battery.cpp:106
+msgid ""
+"_: keep short, unit in spinbox\n"
+"sec"
+msgstr ""
+
+#: battery.cpp:114
+msgid "Select Battery Icons"
+msgstr ""
+
+#: battery.cpp:125
+msgid "No &battery"
+msgstr ""
+
+#: battery.cpp:126
+msgid "&Not charging"
+msgstr ""
+
+#: battery.cpp:127
+msgid "Char&ging"
+msgstr ""
+
+#: battery.cpp:143
+msgid "Current Battery Status"
+msgstr ""
+
+#: battery.cpp:174
+msgid ""
+"This panel controls whether the battery status monitor\n"
+"appears in the system tray and what it looks like."
+msgstr ""
+
+#: battery.cpp:180
+msgid "&Start Battery Monitor"
+msgstr ""
+
+#: battery.cpp:276
+msgid ""
+"<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
+"make use of this module, you must have power management system software "
+"installed. (And, of course, you should have batteries in your machine.)"
+msgstr ""
+
+#: battery.cpp:286
+msgid ""
+"<qt>The battery monitor has been started, but the tray icon is currently "
+"disabled.  You can make it appear by selecting the <b>Show battery "
+"monitor</b> entry on this page and applying your changes.</qt>"
+msgstr ""
+
+#: battery.cpp:361
+msgid "Present"
+msgstr ""
+
+#: battery.cpp:367
+msgid "Not present"
+msgstr ""
+
+#: buttons.cpp:122
+msgid "Lid Switch Closed"
+msgstr ""
+
+#: buttons.cpp:124
+msgid "Select which actions will occur when the laptop's lid is closed"
+msgstr ""
+
+#: buttons.cpp:128 power.cpp:129 warning.cpp:241
+msgid "Standb&y"
+msgstr ""
+
+#: buttons.cpp:129 buttons.cpp:205
+msgid "Causes the laptop to move into the standby temporary low-power state"
+msgstr ""
+
+#: buttons.cpp:132 power.cpp:133 warning.cpp:247
+msgid "&Suspend"
+msgstr ""
+
+#: buttons.cpp:133 buttons.cpp:209
+msgid "Causes the laptop to move into the suspend 'save-to-ram' state"
+msgstr ""
+
+#: buttons.cpp:136 power.cpp:137 warning.cpp:253
+msgid "H&ibernate"
+msgstr ""
+
+#: buttons.cpp:137 buttons.cpp:213
+msgid "Causes the laptop to move into the hibernate 'save-to-disk' state"
+msgstr ""
+
+#: buttons.cpp:140 buttons.cpp:216 warning.cpp:262
+msgid "System power off"
+msgstr ""
+
+#: buttons.cpp:141 buttons.cpp:217
+msgid "Causes the laptop to power down"
+msgstr ""
+
+#: buttons.cpp:144 buttons.cpp:220
+msgid "Logout"
+msgstr ""
+
+#: buttons.cpp:145 buttons.cpp:221
+msgid "Causes you to be logged out"
+msgstr ""
+
+#: buttons.cpp:148
+msgid "&Off"
+msgstr ""
+
+#: buttons.cpp:150 buttons.cpp:226 power.cpp:143 power.cpp:236
+msgid "Brightness"
+msgstr ""
+
+#: buttons.cpp:151 buttons.cpp:227
+msgid "Causes the back panel brightness to be set"
+msgstr ""
+
+#: buttons.cpp:157 buttons.cpp:232
+msgid "How bright the back panel will be set to"
+msgstr ""
+
+#: buttons.cpp:164 buttons.cpp:240 power.cpp:158 power.cpp:251 profile.cpp:102
+#: profile.cpp:165 warning.cpp:192
+msgid "System performance"
+msgstr ""
+
+#: buttons.cpp:165 buttons.cpp:241
+msgid "Causes the performance profile to be changed"
+msgstr ""
+
+#: buttons.cpp:170 buttons.cpp:246
+msgid "The performance profile to switch to"
+msgstr ""
+
+#: buttons.cpp:178 buttons.cpp:254 power.cpp:173 power.cpp:266 profile.cpp:184
+msgid "CPU throttle"
+msgstr ""
+
+#: buttons.cpp:179 buttons.cpp:255
+msgid "Causes the CPU to be throttled back"
+msgstr ""
+
+#: buttons.cpp:184 buttons.cpp:260
+msgid "How much to throttle back the CPU"
+msgstr ""
+
+#: buttons.cpp:198
+msgid "Power Switch Pressed"
+msgstr ""
+
+#: buttons.cpp:200
+msgid ""
+"Select which actions will occur when the laptop's power button is pressed"
+msgstr ""
+
+#: buttons.cpp:204 power.cpp:222
+msgid "Sta&ndby"
+msgstr ""
+
+#: buttons.cpp:208 power.cpp:226
+msgid "S&uspend"
+msgstr ""
+
+#: buttons.cpp:212 power.cpp:230
+msgid "Hi&bernate"
+msgstr ""
+
+#: buttons.cpp:224
+msgid "O&ff"
+msgstr ""
+
+#: buttons.cpp:272
+msgid ""
+"This panel enables actions that are triggered when the lid closure switch or "
+"power switch on your laptop is pressed. Some laptops may already "
+"automatically do things like this, if you cannot disable them in your BIOS "
+"you probably should not enable anything in this panel."
+msgstr ""
+
+#: buttons.cpp:614
+msgid ""
+"<h1>Laptop Power Control</h1>This module allows you to configure the power "
+"switch or lid closure switch on your laptop so they can trigger system "
+"actions"
+msgstr ""
+
+#: main.cpp:155
+msgid "&Battery"
+msgstr ""
+
+#: main.cpp:159
+msgid "&Power Control"
+msgstr ""
+
+#: main.cpp:163
+msgid "Low Battery &Warning"
+msgstr ""
+
+#: main.cpp:167
+msgid "Low Battery &Critical"
+msgstr ""
+
+#: main.cpp:179
+msgid "Default Power Profiles"
+msgstr ""
+
+#: main.cpp:186
+msgid "Button Actions"
+msgstr ""
+
+#: main.cpp:193
+msgid "&ACPI Config"
+msgstr ""
+
+#: main.cpp:200
+msgid "&APM Config"
+msgstr ""
+
+#: main.cpp:217
+msgid "&Sony Laptop Config"
+msgstr ""
+
+#: main.cpp:227
+msgid "Laptop Battery Configuration"
+msgstr ""
+
+#: main.cpp:228
+msgid "Battery Control Panel Module"
+msgstr ""
+
+#: main.cpp:230
+msgid "(c) 1999 Paul Campbell"
+msgstr ""
+
+#: main.cpp:292
+msgid ""
+"<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
+"make use of this module, you must have power management software installed. "
+"(And, of course, you should have batteries in your machine.)"
+msgstr ""
+
+#: pcmcia.cpp:44
+msgid "kcmlaptop"
+msgstr ""
+
+#: pcmcia.cpp:45
+msgid "TDE Panel System Information Control Module"
+msgstr ""
+
+#: pcmcia.cpp:47
+msgid "(c) 1999 - 2002 Paul Campbell"
+msgstr ""
+
+#: pcmcia.cpp:85
+msgid "Version: "
+msgstr ""
+
+#: pcmcia.cpp:118
+msgid ""
+"<h1>PCMCIA Config</h1>This module shows information about the PCMCIA cards "
+"in your system, if there are PCMCIA cards."
+msgstr ""
+
+#: power.cpp:123 profile.cpp:76
+msgid "Not Powered"
+msgstr ""
+
+#: power.cpp:124
+msgid ""
+"Options in this box apply when the laptop is unplugged from the wall and has "
+"been idle for a while"
+msgstr ""
+
+#: power.cpp:130 power.cpp:223
+msgid "Causes the laptop to change to a standby temporary-low power state"
+msgstr ""
+
+#: power.cpp:134 power.cpp:227
+msgid "Causes the laptop to change to a suspend 'save-to-ram' state"
+msgstr ""
+
+#: power.cpp:138 power.cpp:231
+msgid "Causes the laptop to change to a hibernate 'save-to-disk' state"
+msgstr ""
+
+#: power.cpp:141 power.cpp:234
+msgid "None"
+msgstr ""
+
+#: power.cpp:144 power.cpp:237
+msgid "Enables changing the laptop's back panel brightness"
+msgstr ""
+
+#: power.cpp:149 power.cpp:242
+msgid "How bright to change the back panel"
+msgstr ""
+
+#: power.cpp:159 power.cpp:252
+msgid "Enables changing the laptop's performance profile"
+msgstr ""
+
+#: power.cpp:164 power.cpp:257
+msgid "Which profile to change it to"
+msgstr ""
+
+#: power.cpp:174 power.cpp:267
+msgid "Enables throttling the laptop's CPU"
+msgstr ""
+
+#: power.cpp:179 power.cpp:272
+msgid "How much to throttle the laptop's CPU"
+msgstr ""
+
+#: power.cpp:195 power.cpp:285
+msgid "Don't act if LAV is >"
+msgstr ""
+
+#: power.cpp:198 power.cpp:288
+msgid ""
+"If enabled and the system load average is greater than this value none of "
+"the above options will be applied"
+msgstr ""
+
+#: power.cpp:204
+msgid "&Wait for:"
+msgstr ""
+
+#: power.cpp:206 power.cpp:296
+msgid "How long the computer has to be idle before these values take effect"
+msgstr ""
+
+#: power.cpp:207 power.cpp:297 warning.cpp:81 warning.cpp:101
+msgid ""
+"_: keep short, unit in spinbox\n"
+"min"
+msgstr ""
+
+#: power.cpp:216 profile.cpp:140
+msgid "Powered"
+msgstr ""
+
+#: power.cpp:218
+msgid ""
+"Options in this box apply when the laptop is plugged into the wall and has "
+"been idle for a while"
+msgstr ""
+
+#: power.cpp:294
+msgid "Wai&t for:"
+msgstr ""
+
+#: power.cpp:304
+msgid ""
+"This panel configures the behavior of the automatic power-down feature - it "
+"works as a sort of extreme screen saver. You can configure different "
+"timeouts and types of behavior depending on whether or not your laptop is "
+"plugged in to the mains supply."
+msgstr ""
+
+#: power.cpp:312
+msgid ""
+"Different laptops may respond to 'standby' in different ways - in many it is "
+"only a temporary state and may not be useful for you."
+msgstr ""
+
+#: power.cpp:581
+msgid ""
+"<h1>Laptop Power Control</h1>This module allows you to control the power "
+"settings of your laptop and set timouts that will trigger state changes you "
+"can use to save power"
+msgstr ""
+
+#: profile.cpp:77
+msgid ""
+"Items in this box take effect whenever the laptop is unplugged from the wall"
+msgstr ""
+
+#: profile.cpp:81 profile.cpp:145
+msgid "Back panel brightness"
+msgstr ""
+
+#: profile.cpp:82 profile.cpp:146
+msgid "Enables the changing of the back panel brightness"
+msgstr ""
+
+#: profile.cpp:89 profile.cpp:153
+msgid "How bright it should be when it is changed"
+msgstr ""
+
+#: profile.cpp:103 profile.cpp:166
+msgid "Enables the changing of the system performance profile"
+msgstr ""
+
+#: profile.cpp:108 profile.cpp:173
+msgid "The new system performance profile to change to"
+msgstr ""
+
+#: profile.cpp:121 warning.cpp:215
+msgid "CPU throttling"
+msgstr ""
+
+#: profile.cpp:122 profile.cpp:185
+msgid "Enables the throttling of the CPU performance"
+msgstr ""
+
+#: profile.cpp:129 profile.cpp:192
+msgid "How much to throttle the CPU by"
+msgstr ""
+
+#: profile.cpp:141
+msgid ""
+"Items in this box take effect whenever the laptop is plugged into the wall"
+msgstr ""
+
+#: profile.cpp:205
+msgid ""
+"This panel allows you to set default values for system attributes so that "
+"they change when the laptop is plugged in to the wall or running on "
+"batteries."
+msgstr ""
+
+#: profile.cpp:211
+msgid ""
+"You can also set options for these values that will be set by low battery "
+"conditions, or system inactivity in the other panels"
+msgstr ""
+
+#: profile.cpp:411
+msgid ""
+"<h1>Laptop Power Profile Setup</h1>This module allows you to configure "
+"default values for static laptop system attributes that will change when the "
+"laptop is plugged in or unplugged from the wall."
+msgstr ""
+
+#: sony.cpp:69
+msgid ""
+"This panel allows you to control some of the features of the\n"
+"'sonypi' device for your laptop - you should not enable the options below if "
+"you\n"
+"also use the 'sonypid' program in your system"
+msgstr ""
+
+#: sony.cpp:73
+msgid "Enable &scroll bar"
+msgstr ""
+
+#: sony.cpp:74
+msgid "When checked this box enables the scrollbar so that it works under TDE"
+msgstr ""
+
+#: sony.cpp:78
+msgid "&Emulate middle mouse button with scroll bar press"
+msgstr ""
+
+#: sony.cpp:79
+msgid ""
+"When checked this box enables pressing the scroll bar to act in the same way "
+"as pressing the middle button on a 3 button mouse"
+msgstr ""
+
+#: sony.cpp:88
+msgid ""
+"The /dev/sonypi is not accessable, if you wish to use the above features "
+"its\n"
+"protections need to be changed. Clicking on the button below will change "
+"them\n"
+msgstr ""
+
+#: sony.cpp:91
+msgid "Setup /dev/sonypi"
+msgstr ""
+
+#: sony.cpp:93
+msgid "This button can be used to enable the sony specific features"
+msgstr ""
+
+#: sony.cpp:113
+msgid ""
+"You will need to supply a root password to allow the protections of "
+"/dev/sonypi to be changed."
+msgstr ""
+
+#: sony.cpp:126
+msgid ""
+"The /dev/sonypi protections cannot be changed because tdesu cannot be found. "
+" Please make sure that it is installed correctly."
+msgstr ""
+
+#: sony.cpp:187
+msgid ""
+"<h1>Sony Laptop Hardware Setup</h1>This module allows you to configure some "
+"Sony laptop hardware for your system"
+msgstr ""
+
+#: warning.cpp:78 warning.cpp:79
+msgid "Critical &trigger:"
+msgstr ""
+
+#: warning.cpp:82 warning.cpp:85 warning.cpp:102 warning.cpp:105
+msgid ""
+"When this amount of battery life is left the actions below will be triggered"
+msgstr ""
+
+#: warning.cpp:84 warning.cpp:104
+#, c-format
+msgid ""
+"_: keep short, unit in spinbox\n"
+"%"
+msgstr ""
+
+#: warning.cpp:98 warning.cpp:99
+msgid "Low &trigger:"
+msgstr ""
+
+#: warning.cpp:121
+msgid "Run &command:"
+msgstr ""
+
+#: warning.cpp:133
+msgid "This command will be run when the battery gets low"
+msgstr ""
+
+#: warning.cpp:136
+msgid "&Play sound:"
+msgstr ""
+
+#: warning.cpp:148
+msgid "This sound will play when the battery gets low"
+msgstr ""
+
+#: warning.cpp:151
+msgid "System &beep"
+msgstr ""
+
+#: warning.cpp:154
+msgid "The system will beep if this is enabled"
+msgstr ""
+
+#: warning.cpp:156
+msgid "&Notify"
+msgstr ""
+
+#: warning.cpp:166
+msgid "Panel b&rightness"
+msgstr ""
+
+#: warning.cpp:168
+msgid "If enabled the back panel brightness will change"
+msgstr ""
+
+#: warning.cpp:174
+msgid "How bright or dim to make the back panel"
+msgstr ""
+
+#: warning.cpp:193
+msgid "If enabled the laptop's power performance profile will change"
+msgstr ""
+
+#: warning.cpp:202
+msgid "The performance profile to change to"
+msgstr ""
+
+#: warning.cpp:216
+msgid "If enabled the CPU performance will be throttled"
+msgstr ""
+
+#: warning.cpp:225
+msgid "How much to throttle the CPU performance by"
+msgstr ""
+
+#: warning.cpp:237
+msgid "System State Change"
+msgstr ""
+
+#: warning.cpp:238
+msgid "You may choose one of the following to occur when the battery gets low"
+msgstr ""
+
+#: warning.cpp:242
+msgid "Move the system into the standby state - a temporary lower power state"
+msgstr ""
+
+#: warning.cpp:248
+msgid "Move the system into the suspend state - also known as 'save-to-ram'"
+msgstr ""
+
+#: warning.cpp:254
+msgid "Move the system into the hibernate state - also known as 'save-to-disk'"
+msgstr ""
+
+#: warning.cpp:259
+msgid "&Logout"
+msgstr ""
+
+#: warning.cpp:263
+msgid "Power the laptop off"
+msgstr ""
+
+#: warning.cpp:266
+msgid "&None"
+msgstr ""
+
+#: warning.cpp:275
+msgid ""
+"This panel controls how and when you receive warnings that your battery "
+"power is going to run out VERY VERY soon."
+msgstr ""
+
+#: warning.cpp:277
+msgid ""
+"This panel controls how and when you receive warnings that your battery "
+"power is about to run out"
+msgstr ""
+
+#: warning.cpp:570 warning.cpp:587
+msgid "Only local files are currently supported."
+msgstr ""
+
+#: warning.cpp:598
+msgid ""
+"<h1>Low battery Warning</h1>This module allows you to set an alarm in case "
+"your battery's charge is about to run out."
+msgstr ""