Add man pages for TDE applications.

Signed-off-by: Michele Calgaro <[email protected]>

17 files changed, 576 insertions, 2 deletions

diff --git a/doc/CMakeLists.txt b/doc/CMakeLists.txt
index 03be086..69724bf 100644
--- a/doc/CMakeLists.txt
+++ b/doc/CMakeLists.txt
@@ -1,3 +1,8 @@
-# This file is genereted by trinity-automake-cmake-convert script by Fat-Zer
+add_subdirectory( man )
 
-tde_auto_add_subdirectories( )
+tde_conditional_add_subdirectory( BUILD_ATLANTIKDESIGNER atlantikdesigner )
+tde_conditional_add_subdirectory( BUILD_KATE_PLUGINS     kate-plugins )
+tde_conditional_add_subdirectory( BUILD_KICKER_APPLETS   kicker-applets )
+tde_conditional_add_subdirectory( BUILD_KONQ_PLUGINS     konq-plugins )
+tde_conditional_add_subdirectory( BUILD_KSIG             ksig )
+tde_conditional_add_subdirectory( BUILD_TUTORIALS        tutorials )
diff --git a/doc/man/CMakeLists.txt b/doc/man/CMakeLists.txt
new file mode 100644
index 0000000..46516ac
--- /dev/null
+++ b/doc/man/CMakeLists.txt
@@ -0,0 +1,5 @@
+tde_conditional_add_subdirectory( BUILD_ATLANTIKDESIGNER atlantikdesigner )
+tde_conditional_add_subdirectory( BUILD_KONQ_PLUGINS     konq-plugins )
+tde_conditional_add_subdirectory( BUILD_KSIG             ksig )
+tde_conditional_add_subdirectory( BUILD_NOATUN_PLUGINS   noatun-plugins )
+tde_conditional_add_subdirectory( BUILD_TDEFILE_PLUGINS  tdefile-plugins )
diff --git a/doc/man/atlantikdesigner/CMakeLists.txt b/doc/man/atlantikdesigner/CMakeLists.txt
new file mode 100644
index 0000000..24ccd70
--- /dev/null
+++ b/doc/man/atlantikdesigner/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/atlantikdesigner/atlantikdesigner.1 b/doc/man/atlantikdesigner/atlantikdesigner.1
new file mode 100644
index 0000000..41a1aeb
--- /dev/null
+++ b/doc/man/atlantikdesigner/atlantikdesigner.1
@@ -0,0 +1,42 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH ATLANTIKDESIGNER 1 "October 14, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+atlantikdesigner \- game board designer for Atlantik
+.SH SYNOPSIS
+.B atlantikdesigner
+.RI "[ " generic-options " ]"
+.SH DESCRIPTION
+\fBAtlantik Designer\fP is a game board designer for Atlantik.
+.PP
+Atlantik is a TDE client for playing Monopoly-like board games on the
+monopd network.  It can play any board supported by the network
+server, including the classic Monopoly game as well as the Atlantik
+game in which the properties include several major cities in North
+America and Europe.
+.PP
+This application is part of the official TDE add-ons module.
+.SH OPTIONS
+For a full summary of options, run \fIatlantikdesigner \-\-help\fP.
+.SH SEE ALSO
+.BR atlantik (6).
+.SH AUTHOR
+Atlantik Designer was written by Jason Katz-Brown <[email protected]>
+and Rob Kaper <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/konq-plugins/CMakeLists.txt b/doc/man/konq-plugins/CMakeLists.txt
new file mode 100644
index 0000000..24ccd70
--- /dev/null
+++ b/doc/man/konq-plugins/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/konq-plugins/exif.py.1 b/doc/man/konq-plugins/exif.py.1
new file mode 100644
index 0000000..7317904
--- /dev/null
+++ b/doc/man/konq-plugins/exif.py.1
@@ -0,0 +1,44 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH EXIF.PY 1 "February 4, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+exif.py \- extract EXIF information from digital camera image files
+.SH SYNOPSIS
+.B exif.py
+\fIimage-file\fP ...
+.SH DESCRIPTION
+This is a Python library for extracting EXIF tags from digital camera
+image files.  It contains a command-line testing and debugging interface,
+which reads EXIF tags from the given files and dumps them to the
+console.
+.PP
+This library is provided with the image conversion and transformation
+plugins for Konqueror.  The JPEG rotation/reflection tool \fBjpegorient\fP,
+part of the same set of plugins, makes use of this library.
+.PP
+This utility is part of the official TDE add-ons module.
+.SH SEE ALSO
+.BR jpegorient (1),
+.BR konqueror (1),
+.BR orient.py (1).
+.SH AUTHOR
+The EXIF extraction library was written by Thierry Bousch
+<[email protected]>, Gene Cash <[email protected]> and
+Leif Jensen <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/konq-plugins/fsview.1 b/doc/man/konq-plugins/fsview.1
new file mode 100644
index 0000000..a1dd43b
--- /dev/null
+++ b/doc/man/konq-plugins/fsview.1
@@ -0,0 +1,52 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH FSVIEW 1 "February 4, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+fsview \- a filesystem viewer that graphically shows disk usage
+.SH SYNOPSIS
+.B fsview
+.RI "[ " generic-options " ]"
+[ \fIfolder\fP ]
+.SH DESCRIPTION
+\fBFSView\fP is a tool for showing disc utilization in a graphical form, much
+like the UNIX command 'du'.  The visualisation type chosen is a
+treemap.  Each directory is represented by a rectangle whose area is
+proportional to its size.  Each directory rectangle contains smaller
+rectangles for its contents, and so on down.
+.PP
+FSView is provided both as a Konqueror plugin for viewing directories,
+and as a standalone executable.
+.PP
+This application is part of the official TDE add-ons module.
+.SH OPTIONS
+Below are the fsview-specific options.
+For a full summary of options, run \fIfsview \-\-help\fP.
+.TP
+\fIfolder\fP
+View the filesystem starting from this folder.
+.SH SEE ALSO
+.BR du (1),
+.BR kdirstat (1),
+.BR konqueror (1).
+.PP
+For a full featured graphical 'du', see KDirStat.  It's quite similar
+to FSView, but allows for lot of cleanup actions.
+.SH AUTHOR
+FSView was written by Josef Weidendorfer <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/konq-plugins/jpegorient.1 b/doc/man/konq-plugins/jpegorient.1
new file mode 100644
index 0000000..3317c86
--- /dev/null
+++ b/doc/man/konq-plugins/jpegorient.1
@@ -0,0 +1,68 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH JPEGORIENT 1 "October 13, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+jpegorient \- change the orientations of JPEG images
+.SH SYNOPSIS
+.B jpegorient
+{ \fB\-90\fP | \fB\-180\fP | \fB\-270\fP | \fB\-v\fP | \fB\-h\fP }
+\fIimage-file\fP ...
+.SH DESCRIPTION
+This is a simple utility for changing the orientations of one or more
+JPEG images.
+It is provided as part of the image conversion and transformation
+plugins for Konqueror.
+.PP
+A single option must be passed before any filenames to specify how the
+orientations of the images are to be changed.  Each new image will be
+saved over the old one.
+.PP
+This utility makes use of
+.BR orient.py (1),
+which is designed to work with certain types of digital camera image
+files.  Instead of modifying the image data, it alters the EXIF
+tags stored with the image to reflect the new orientation.  For this
+reason only images with the correct types of EXIF tags can be changed
+using this tool.
+.PP
+This utility is part of the official TDE add-ons module.
+.SH OPTIONS
+.TP
+\fB\-90\fP
+Rotate each image by 90 degrees clockwise.
+.TP
+\fB\-180\fP
+Rotate each image by a half turn (i.e., 180 degrees).
+.TP
+\fB\-270\fP
+Rotate each image by 270 degrees clockwise (i.e., 90 degrees counter-clockwise).
+.TP
+\fB\-v\fP
+Flip each image vertically.
+.TP
+\fB\-h\fP
+Flip each image horizontally.
+.SH SEE ALSO
+.BR exif.py (1),
+.BR konqueror (1),
+.BR orient.py (1).
+.SH AUTHOR
+The image transformation plugins were written by
+Leif Jensen <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/konq-plugins/orient.py.1 b/doc/man/konq-plugins/orient.py.1
new file mode 100644
index 0000000..024ec11
--- /dev/null
+++ b/doc/man/konq-plugins/orient.py.1
@@ -0,0 +1,88 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH ORIENT.PY 1 "October 13, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+orient.py \- change the orientation of a digital camera image file
+.SH SYNOPSIS
+.B orient.py
+.I image-file
+.br
+.B orient.py
+[1-8]
+.I image-file
+.SH DESCRIPTION
+This is a small script for changing the orientation of certain types
+of digital camera image files.  The image data is not modified, but
+rather the EXIF tags stored with the image are altered to reflect the
+new orientation.  For this reason only images with the correct types of
+EXIF tags can be changed using this script.
+.PP
+When called with with a numeric argument from 1 to 8, the orientation
+will be changed as described in the options section below.  When called
+with only a filename, the current orientation will be written to the
+console (also as a number from 1 to 8).
+.PP
+If the image contains no EXIF information or if the EXIF information is not
+of the correct type, an error will be displayed and this script will
+exit immediately.
+.PP
+This script is provided with the image conversion and transformation
+plugins for Konqueror.  For a more general-purpose JPEG rotation/reflection
+tool, see
+.BR jpegorient (1)
+which is also a part of this same set of plugins.
+.PP
+This utility is part of the official TDE add-ons module.
+.SH OPTIONS
+The possible orientations are represented by the numbers 1 to 8 as
+follows.
+.TP
+.B 1
+No change of orientation.
+.TP
+.B 2
+Flip horizontally.
+.TP
+.B 3
+Rotate by a half turn (i.e., 180 degrees).
+.TP
+.B 4
+Flip vertically.
+.TP
+.B 5
+Transpose image (i.e., reflect across the upper-left to lower-right
+diagonal axis).
+.TP
+.B 6
+Rotate by 90 degrees clockwise.
+.TP
+.B 7
+Transverse transpose image (i.e., reflect across the upper-right to
+lower-left diagonal axis).
+.TP
+.B 8
+Rotate by 270 degrees clockwise (i.e., 90 degrees counter-clockwise).
+.SH SEE ALSO
+.BR exif.py (1),
+.BR jpegorient (1),
+.BR konqueror (1).
+.SH AUTHOR
+The image transformation plugins were written by
+Leif Jensen <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/ksig/CMakeLists.txt b/doc/man/ksig/CMakeLists.txt
new file mode 100644
index 0000000..24ccd70
--- /dev/null
+++ b/doc/man/ksig/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/ksig/ksig.1 b/doc/man/ksig/ksig.1
new file mode 100644
index 0000000..5c0ec94
--- /dev/null
+++ b/doc/man/ksig/ksig.1
@@ -0,0 +1,59 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH KSIG 1 "February 4, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+ksig \- a graphical tool for managing multiple email signatures
+.SH SYNOPSIS
+.B ksig
+.RI "[ " generic-options " ]"
+[ \fB\-\-random\fP | \fB\-\-daily\fP ]
+.SH DESCRIPTION
+\fBKSig\fP is a graphical tool for keeping track of many different email
+signatures.  The signatures themselves can be edited through KSig's
+graphical user interface.  This is done by starting KSig in the usual way
+through the menus, or by running KSig without either of the special
+options \-\-random or \-\-daily.
+.PP
+A direct command-line interface is then available for generating random
+or daily signatures from this list.  This is achieved by running KSig
+with one of the options \-\-random or \-\-daily, both of which are
+described below.
+.PP
+The command-line interface makes a suitable plugin for generating
+signatures in external mail clients such as KMail.  See
+\fI/opt/trinity/share/doc/ksig/README.Debian\fP for details on how this can be
+done.
+.PP
+This application is part of the official TDE add-ons module.
+.SH OPTIONS
+Below are the ksig-specific options.
+For a full summary of options, run \fIksig \-\-help\fP.
+.TP
+\fB\-\-random\fP
+Write a random signature from the list to the console.
+.TP
+\fB\-\-daily\fP
+Write a signature for the day to the console.  The signature will change
+from day to day, but multiple calls on the same day will always return
+the same signature.
+.SH SEE ALSO
+.BR kmail (1).
+.SH AUTHOR
+KSig was written by Scott Wheeler <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/noatun-plugins/CMakeLists.txt b/doc/man/noatun-plugins/CMakeLists.txt
new file mode 100644
index 0000000..24ccd70
--- /dev/null
+++ b/doc/man/noatun-plugins/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/noatun-plugins/noatunsynaescope.bin.1 b/doc/man/noatun-plugins/noatunsynaescope.bin.1
new file mode 100644
index 0000000..fe860f1
--- /dev/null
+++ b/doc/man/noatun-plugins/noatunsynaescope.bin.1
@@ -0,0 +1,38 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH NOATUNSYNAESCOPE.BIN 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+noatunsynaescope.bin \- start the Synaescope visualisation plugin for Noatun
+.SH SYNOPSIS
+.B noatunsynaescope.bin
+.SH DESCRIPTION
+This program starts the Synaescope visualisation plugin for Noatun, the audio
+and video media player for TDE.
+.PP
+This program is for Noatun's internal use and should \fBnot\fP be run
+directly.  To start the plugin, run Noatun and select Plugins from the
+configuration dialog.
+.PP
+This plugin is part of the TDE addons module.
+.SH SEE ALSO
+.BR noatun (1).
+.SH AUTHOR
+The Synaescope plugin was written by Charles Samuels <[email protected]>,
+Paul Francis Harrison <[email protected]> et al.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/noatun-plugins/noatuntippecanoe.bin.1 b/doc/man/noatun-plugins/noatuntippecanoe.bin.1
new file mode 100644
index 0000000..b33eb3b
--- /dev/null
+++ b/doc/man/noatun-plugins/noatuntippecanoe.bin.1
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH NOATUNTIPPECANOE.BIN 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+noatuntippecanoe.bin \- start the Tippecanoe visualisation plugin for Noatun
+.SH SYNOPSIS
+.B noatuntippecanoe.bin
+.SH DESCRIPTION
+This program starts the Tippecanoe visualisation plugin for Noatun, the audio
+and video media player for TDE.
+.PP
+This program is for Noatun's internal use and should \fBnot\fP be run
+directly.  To start the plugin, run Noatun and select Plugins from the
+configuration dialog.
+.PP
+This plugin is part of the TDE addons module.
+.SH SEE ALSO
+.BR noatun (1).
+.SH AUTHOR
+The Tippecanoe plugin was written by Neil Stevens <[email protected]>,
+Charles Samuels <[email protected]> and
+Paul Francis Harrison <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/noatun-plugins/noatuntyler.bin.1 b/doc/man/noatun-plugins/noatuntyler.bin.1
new file mode 100644
index 0000000..5a40010
--- /dev/null
+++ b/doc/man/noatun-plugins/noatuntyler.bin.1
@@ -0,0 +1,39 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH NOATUNTYLER.BIN 1 "January 31, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+noatuntyler.bin \- start the Tyler visualisation plugin for Noatun
+.SH SYNOPSIS
+.B noatuntyler.bin
+.SH DESCRIPTION
+This program starts the Tyler visualisation plugin for Noatun, the audio
+and video media player for TDE.
+.PP
+This program is for Noatun's internal use and should \fBnot\fP be run
+directly.  To start the plugin, run Noatun and select Plugins from the
+configuration dialog.
+.PP
+This plugin is part of the TDE addons module.
+.SH SEE ALSO
+.BR noatun (1).
+.SH AUTHOR
+The Tyler plugin was written by Neil Stevens <[email protected]>,
+Julien Carme <[email protected]>, Charles Samuels <[email protected]>
+and Mitja Horvat <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).
diff --git a/doc/man/tdefile-plugins/CMakeLists.txt b/doc/man/tdefile-plugins/CMakeLists.txt
new file mode 100644
index 0000000..24ccd70
--- /dev/null
+++ b/doc/man/tdefile-plugins/CMakeLists.txt
@@ -0,0 +1,7 @@
+file( GLOB _man_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.1 )
+
+INSTALL(
+    FILES ${_man_files}
+    DESTINATION ${MAN_INSTALL_DIR}/man1
+    COMPONENT doc
+)
diff --git a/doc/man/tdefile-plugins/lnkforward.1 b/doc/man/tdefile-plugins/lnkforward.1
new file mode 100644
index 0000000..692d618
--- /dev/null
+++ b/doc/man/tdefile-plugins/lnkforward.1
@@ -0,0 +1,60 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH LNKFORWARD 1 "October 23, 2004"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+lnkforward \- open an URL in a Windows .lnk file under TDE
+.SH SYNOPSIS
+.B lnkforward
+[ \fIgeneric-options\fP ]
+[ \fB\-\-map\fP \fIdrive\fP=\fIpath\fP ... ]
+\fIURL\fP
+.SH DESCRIPTION
+\fBlnkforward\fP examines a Windows .lnk file, determines its target and
+then opens this target file.  In deciding how to open the target file,
+the usual TDE file associations will be used.
+.PP
+The given URL must include a protocol.  Specifically, if it is simply a
+file on the local filesystem, it must be given in the form
+\fIfile:/path/to/file.lnk\fP.
+.PP
+Drive mappings must be supplied (via \-\-map) for any Windows drive
+referred to in the .lnk file.  See the OPTIONS section below for details.
+.PP
+This utility is used by the .lnk tdefile plugin, and is
+part of the official TDE add-ons module.
+.SH OPTIONS
+Below are the lnkforward-specific options.
+For a full summary of options, run \fIlnkforward \-\-help\fP.
+.TP
+\fB\-\-map\fP \fIdrive\fP=\fIpath\fP
+Map the given Windows drive to the given path on the local filesystem
+(generally its mount point).
+This option may be passed multiple times.
+.SH EXAMPLE
+Suppose that the Windows file \fIc:\\readme.txt.lnk\fP is a link to
+\fId:\\foo\\bar.txt\fP.  Then the following command will open the file
+\fI/mnt/data/foo/bar.txt\fP in the usual TDE text editor:
+.PP
+.RS
+\fIprompt$\fP
+lnkforward \-\-map c=/mnt/windows \-\-map d=/mnt/data /mnt/windows/readme.lnk
+.RE
+.SH AUTHOR
+This utility was written by Martin Koller <[email protected]>.
+.br
+This manual page was prepared by Ben Burton <[email protected]>
+for the Debian GNU/Linux system (but may be used by others).