diff options
Diffstat (limited to 'kppp/README.ModemDB')
| -rw-r--r-- | kppp/README.ModemDB | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/kppp/README.ModemDB b/kppp/README.ModemDB new file mode 100644 index 00000000..448912c2 --- /dev/null +++ b/kppp/README.ModemDB @@ -0,0 +1,77 @@ +Modem Database +============== + +The Modem Database (MD) will further simplify kppp by allowing the user to +select a modem from a database. The MD will be organized by the name of the +manufacturer. Each modem will only have those entries not common to the +generic Hayes Modem command set. The following entries will be available +(defaults in brackets): + +[Group]: Can be freely chosen, may not be "Common" +Vendor: The modem vendor +Name: The name of the modem, without vendor. Needed +Parent: All settings of this modem are inherited. Parent works + recursive, so if the parent has another parent, this will + be inherited too and so on. +Reset: This should reset the modem (ATZ) +Init: The init string (AT V1 E1) +Volume0: Volume off (ATL0) +Volume1: Medium volume (ATL1) +Volume2: Loud volume (ATL3) +PreInitDelay: Delay after opening the modem, before sending the Init + command (50) +PostInitDelay: Delay after sending the Init command (30) +InitResponse: Modem response to the Init command (OK) +BlindDialOn: To dial without waiting for line carrier (ATX3) +BlindDialOff: Don�t dial without waiting for line carrier (ATX4) +ToneDial: The command to dial out, number is appended (ATDT) +PulseDial: The command to use impulse dialing (ATDP) +ConnectResponse:The modems answer to "Dial" when connection is established +BusyResponse: Response to a busy line (BUSY) +NoCarrierResponse: Response when carrier was not establ. (NO CARRIER) +NoDialTone: Response when no dial tone was found (NO DIALTONE) +SupportsCD: Modem supports the "Modem asserts CD line" feature (1==yes) +AutoAnswerOn: Turn on auto answer (for callback) (ATS0=1) +AutoAnswerOff: Turn off auto answer ATS0=0 + +If the name begins with "!", this is NOT shown in the modem list but can be +taken as parent. Every modem initially inherits from "Common". + +Example: +======== + +[Common] +Vendor=Generic +Name=Hayes Compatible +Reset=Z +Init=ATV1 +Volume0=M0L0 +Volume1=M1L1 +Volume2=M1L3 +PreInitDelay=50 +PostInitDelay=30 +InitResponse=OK +BlindDialOn=X3 +BlindDialOff=X4 +ToneDial=DT +PulseDial=DP +ConnectResponse=CONNECT +BusyResponse=BUSY +NoCarrierResponese=NO CARRIER +NoDialTone=NO DIALTONE +SupportsCD=true + +[!Zyxel Omni TA128] +Vendor=Zyxel +Name=Omni TA 128 +Reset=&F + +[Zyxel Omni TA128/X75] +Parent=Zyxel Omni TA128 +Name=Zyxel Omni TA128/X75 +Init=B20 V1 E1 + +[Zyxel Omni TA128/sync.PPP] +Parent=!Zyxel Omni TA128 +Name=Zyxel Omni TA128/sync.PPP +Init=B40 V1 E1 |