Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731

1 files changed, 1265 insertions, 0 deletions

diff --git a/src/kernel/qnetworkprotocol.cpp b/src/kernel/qnetworkprotocol.cpp
new file mode 100644
index 000000000..8f095faea
--- /dev/null
+++ b/src/kernel/qnetworkprotocol.cpp
@@ -0,0 +1,1265 @@
+/****************************************************************************
+**
+** Implementation of TQNetworkProtocol class
+**
+** Created : 950429
+**
+** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
+**
+** This file is part of the kernel module of the TQt GUI Toolkit.
+**
+** This file may be used under the terms of the GNU General
+** Public License versions 2.0 or 3.0 as published by the Free
+** Software Foundation and appearing in the files LICENSE.GPL2
+** and LICENSE.GPL3 included in the packaging of this file.
+** Alternatively you may (at your option) use any later version
+** of the GNU General Public License if such license has been
+** publicly approved by Trolltech ASA (or its successors, if any)
+** and the KDE Free TQt Foundation.
+**
+** Please review the following information to ensure GNU General
+** Public Licensing retquirements will be met:
+** http://trolltech.com/products/qt/licenses/licensing/opensource/.
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
+** or contact the sales department at [email protected].
+**
+** This file may be used under the terms of the Q Public License as
+** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
+** included in the packaging of this file.  Licensees holding valid TQt
+** Commercial licenses may use this file in accordance with the TQt
+** Commercial License Agreement provided with the Software.
+**
+** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
+** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
+** herein.
+**
+**********************************************************************/
+
+#include "qnetworkprotocol.h"
+
+#ifndef QT_NO_NETWORKPROTOCOL
+
+#include "qlocalfs.h"
+#include "qurloperator.h"
+#include "qtimer.h"
+#include "qmap.h"
+#include "qptrqueue.h"
+
+//#define TQNETWORKPROTOCOL_DEBUG
+#define NETWORK_OP_DELAY 1000
+
+extern Q_EXPORT TQNetworkProtocolDict *qNetworkProtocolRegister;
+
+TQNetworkProtocolDict *qNetworkProtocolRegister = 0;
+
+class TQNetworkProtocolPrivate
+{
+public:
+    TQNetworkProtocolPrivate( TQNetworkProtocol *p )
+    {
+	url = 0;
+	opInProgress = 0;
+	opStartTimer = new TQTimer( p );
+	removeTimer = new TQTimer( p );
+	operationQueue.setAutoDelete( FALSE );
+	autoDelete = FALSE;
+	removeInterval = 10000;
+	oldOps.setAutoDelete( FALSE );
+    }
+
+    ~TQNetworkProtocolPrivate()
+    {
+	removeTimer->stop();
+	if ( opInProgress ) {
+	    if ( opInProgress == operationQueue.head() )
+		operationQueue.dequeue();
+	    opInProgress->free();
+	}
+	while ( operationQueue.head() ) {
+	    operationQueue.head()->free();
+	    operationQueue.dequeue();
+	}
+	while ( oldOps.first() ) {
+	    oldOps.first()->free();
+	    oldOps.removeFirst();
+	}
+	delete opStartTimer;
+    }
+
+    TQUrlOperator *url;
+    TQPtrQueue< TQNetworkOperation > operationQueue;
+    TQNetworkOperation *opInProgress;
+    TQTimer *opStartTimer, *removeTimer;
+    int removeInterval;
+    bool autoDelete;
+    TQPtrList< TQNetworkOperation > oldOps;
+};
+
+/*!
+    \class TQNetworkProtocol qnetworkprotocol.h
+    \brief The TQNetworkProtocol class provides a common API for network protocols.
+\if defined(commercial)
+    It is part of the <a href="commercialeditions.html">TQt Enterprise Edition</a>.
+\endif
+
+    \module network
+    \ingroup io
+    \module network
+    \mainclass
+
+    This is a base class which should be used for network protocols
+    implementations that can then be used in TQt (e.g. in the file
+    dialog) together with the TQUrlOperator.
+
+    The easiest way to implement a new network protocol is to
+    reimplement the operation*() methods, e.g. operationGet(), etc.
+    Only the supported operations should be reimplemented. To specify
+    which operations are supported, also reimplement
+    supportedOperations() and return an int that is OR'd together
+    using the supported operations from the \l
+    TQNetworkProtocol::Operation enum.
+
+    When you implement a network protocol this way, it is important to
+    emit the correct signals. Also, always emit the finished() signal
+    when an operation is done (on success \e and on failure). TQt
+    relies on correctly emitted finished() signals.
+
+    For a detailed description of the TQt Network Architecture and how
+    to implement and use network protocols in TQt, see the \link
+    network.html TQt Network Documentation\endlink.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::newChildren( const TQValueList<TQUrlInfo> &i, TQNetworkOperation *op )
+
+    This signal is emitted after listChildren() was called and new
+    children (files) have been read from the list of files. \a i holds
+    the information about the new children. \a op is the pointer to
+    the operation object which contains all the information about the
+    operation, including the state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+
+    When implementing your own network protocol and reading children,
+    you usually don't read one child at once, but rather a list of
+    them. That's why this signal takes a list of TQUrlInfo objects. If
+    you prefer to read just one child at a time you can use the
+    convenience signal newChild(), which takes a single TQUrlInfo
+    object.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::newChild( const TQUrlInfo &i, TQNetworkOperation *op )
+
+    This signal is emitted if a new child (file) has been read.
+    TQNetworkProtocol automatically connects it to a slot which creates
+    a list of TQUrlInfo objects (with just one TQUrlInfo \a i) and emits
+    the newChildren() signal with this list. \a op is the pointer to
+    the operation object which contains all the information about the
+    operation that has finished, including the state, etc.
+
+    This is just a convenience signal useful for implementing your own
+    network protocol. In all other cases connect to the newChildren()
+    signal with its list of TQUrlInfo objects.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::finished( TQNetworkOperation *op )
+
+    This signal is emitted when an operation finishes. This signal is
+    always emitted, for both success and failure. \a op is the pointer
+    to the operation object which contains all the information about
+    the operation, including the state, etc. Check the state and error
+    code of the operation object to determine whether or not the
+    operation was successful.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::start( TQNetworkOperation *op )
+
+    Some operations (such as listChildren()) emit this signal when
+    they start processing the operation. \a op is the pointer to the
+    operation object which contains all the information about the
+    operation, including the state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::createdDirectory( const TQUrlInfo &i, TQNetworkOperation *op )
+
+    This signal is emitted when mkdir() has been succesful and the
+    directory has been created. \a i holds the information about the
+    new directory. \a op is the pointer to the operation object which
+    contains all the information about the operation, including the
+    state, etc. Using op->arg( 0 ), you can get the file name of the
+    new directory.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::removed( TQNetworkOperation *op )
+
+    This signal is emitted when remove() has been succesful and the
+    file has been removed. \a op holds the file name of the removed
+    file in the first argument, accessible with op->arg( 0 ). \a op is
+    the pointer to the operation object which contains all the
+    information about the operation, including the state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::itemChanged( TQNetworkOperation *op )
+
+    This signal is emitted whenever a file which is a child of this
+    URL has been changed, e.g. by successfully calling rename(). \a op
+    holds the original and the new file names in the first and second
+    arguments, accessible with op->arg( 0 ) and op->arg( 1 )
+    respectively. \a op is the pointer to the operation object which
+    contains all the information about the operation, including the
+    state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::data( const TQByteArray &data,
+    TQNetworkOperation *op )
+
+    This signal is emitted when new \a data has been received after
+    calling get() or put(). \a op holds the name of the file from
+    which data is retrieved or uploaded in its first argument, and the
+    (raw) data in its second argument. You can get them with
+    op->arg( 0 ) and op->rawArg( 1 ). \a op is the pointer to the
+    operation object, which contains all the information about the
+    operation, including the state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator (which is used by the network
+    protocol) emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::dataTransferProgress( int bytesDone, int bytesTotal, TQNetworkOperation *op )
+
+    This signal is emitted during the transfer of data (using put() or
+    get()). \a bytesDone is how many bytes of \a bytesTotal have been
+    transferred. \a bytesTotal may be -1, which means that the total
+    number of bytes is not known. \a op is the pointer to the
+    operation object which contains all the information about the
+    operation, including the state, etc.
+
+    When a protocol emits this signal, TQNetworkProtocol is smart
+    enough to let the TQUrlOperator, which is used by the network
+    protocol, emit its corresponding signal.
+*/
+
+/*!
+    \fn void TQNetworkProtocol::connectionStateChanged( int state, const TQString &data )
+
+    This signal is emitted whenever the state of the connection of the
+    network protocol is changed. \a state describes the new state,
+    which is one of, \c ConHostFound, \c ConConnected or \c ConClosed.
+    \a data is a message text.
+*/
+
+/*!
+    \enum TQNetworkProtocol::State
+
+    This enum contains the state that a TQNetworkOperation can have.
+
+    \value StWaiting  The operation is in the TQNetworkProtocol's queue
+    waiting to be prcessed.
+
+    \value StInProgress  The operation is being processed.
+
+    \value StDone  The operation has been processed succesfully.
+
+    \value StFailed  The operation has been processed but an error occurred.
+
+    \value StStopped  The operation has been processed but has been
+    stopped before it finished, and is waiting to be processed.
+
+*/
+
+/*!
+    \enum TQNetworkProtocol::Operation
+
+    This enum lists the possible operations that a network protocol
+    can support. supportedOperations() returns an int of these that is
+    OR'd together. Also, the type() of a TQNetworkOperation is always
+    one of these values.
+
+    \value OpListChildren  List the children of a URL, e.g. of a directory.
+    \value OpMkDir  Create a directory.
+    \value OpRemove  Remove a child (e.g. a file).
+    \value OpRename  Rename a child (e.g. a file).
+    \value OpGet  Get data from a location.
+    \value OpPut  Put data to a location.
+*/
+
+/*!
+    \enum TQNetworkProtocol::ConnectionState
+
+    When the connection state of a network protocol changes it emits
+    the signal connectionStateChanged(). The first argument is one of
+    the following values:
+
+    \value ConHostFound  Host has been found.
+    \value ConConnected  Connection to the host has been established.
+    \value ConClosed  Connection has been closed.
+*/
+
+/*!
+    \enum TQNetworkProtocol::Error
+
+    When an operation fails (finishes unsuccessfully), the
+    TQNetworkOperation of the operation returns an error code which has
+    one of the following values:
+
+    \value NoError  No error occurred.
+
+    \value ErrValid  The URL you are operating on is not valid.
+
+    \value ErrUnknownProtocol  There is no protocol implementation
+    available for the protocol of the URL you are operating on (e.g.
+    if the protocol is http and no http implementation has been
+    registered).
+
+    \value ErrUnsupported  The operation is not supported by the
+    protocol.
+
+    \value ErrParse  The URL could not be parsed correctly.
+
+    \value ErrLoginIncorrect  You needed to login but the username
+    or password is wrong.
+
+    \value ErrHostNotFound  The specified host (in the URL) couldn't
+    be found.
+
+    \value ErrListChildren  An error occurred while listing the
+    children (files).
+
+    \value ErrMkDir  An error occurred when creating a directory.
+
+    \value ErrRemove  An error occurred when removing a child (file).
+
+    \value ErrRename   An error occurred when renaming a child (file).
+
+    \value ErrGet  An error occurred while getting (retrieving) data.
+
+    \value ErrPut  An error occurred while putting (uploading) data.
+
+    \value ErrFileNotExisting  A file which is needed by the operation
+    doesn't exist.
+
+    \value ErrPermissionDenied  Permission for doing the operation has
+    been denied.
+
+    You should also use these error codes when implementing custom
+    network protocols. If this is not possible, you can define your own
+    error codes by using integer values that don't conflict with any
+    of these values.
+*/
+
+/*!
+    Constructor of the network protocol base class. Does some
+    initialization and connecting of signals and slots.
+*/
+
+TQNetworkProtocol::TQNetworkProtocol()
+    : TQObject()
+{
+    d = new TQNetworkProtocolPrivate( this );
+
+    connect( d->opStartTimer, SIGNAL( timeout() ),
+	     this, SLOT( startOps() ) );
+    connect( d->removeTimer, SIGNAL( timeout() ),
+	     this, SLOT( removeMe() ) );
+
+    if ( url() ) {
+	connect( this, SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ),
+		 url(), SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( finished(TQNetworkOperation*) ),
+		 url(), SIGNAL( finished(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( start(TQNetworkOperation*) ),
+		 url(), SIGNAL( start(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		 url(), SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		 url(), SLOT( addEntry(const TQValueList<TQUrlInfo>&) ) );
+	connect( this, SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ),
+		 url(), SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( removed(TQNetworkOperation*) ),
+		 url(), SIGNAL( removed(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( itemChanged(TQNetworkOperation*) ),
+		 url(), SIGNAL( itemChanged(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ),
+		 url(), SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( connectionStateChanged(int,const TQString&) ),
+		 url(), SIGNAL( connectionStateChanged(int,const TQString&) ) );
+    }
+
+    connect( this, SIGNAL( finished(TQNetworkOperation*) ),
+	     this, SLOT( processNextOperation(TQNetworkOperation*) ) );
+    connect( this, SIGNAL( newChild(const TQUrlInfo&,TQNetworkOperation*) ),
+	     this, SLOT( emitNewChildren(const TQUrlInfo&,TQNetworkOperation*) ) );
+
+}
+
+/*!
+    Destructor.
+*/
+
+TQNetworkProtocol::~TQNetworkProtocol()
+{
+    delete d;
+}
+
+/*!
+    Sets the TQUrlOperator, on which the protocol works, to \a u.
+
+    \sa TQUrlOperator
+*/
+
+void TQNetworkProtocol::setUrl( TQUrlOperator *u )
+{
+    if ( url() ) {
+	disconnect( this, SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ),
+		    url(), SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( finished(TQNetworkOperation*) ),
+		    url(), SIGNAL( finished(TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( start(TQNetworkOperation*) ),
+		    url(), SIGNAL( start(TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		    url(), SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		    url(), SLOT( addEntry(const TQValueList<TQUrlInfo>&) ) );
+	disconnect( this, SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ),
+		    url(), SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( removed(TQNetworkOperation*) ),
+		    url(), SIGNAL( removed(TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( itemChanged(TQNetworkOperation*) ),
+		    url(), SIGNAL( itemChanged(TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ),
+		    url(), SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) );
+	disconnect( this, SIGNAL( connectionStateChanged(int,const TQString&) ),
+		    url(), SIGNAL( connectionStateChanged(int,const TQString&) ) );
+    }
+
+
+    // ### if autoDelete is TRUE, we should delete the TQUrlOperator (something
+    // like below; but that is not possible since it would delete this, too).
+    //if ( d->autoDelete && (d->url!=u) ) {
+    //    delete d->url; // destructor deletes the network protocol
+    //}
+    d->url = u;
+
+    if ( url() ) {
+	connect( this, SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ),
+		 url(), SIGNAL( data(const TQByteArray&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( finished(TQNetworkOperation*) ),
+		 url(), SIGNAL( finished(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( start(TQNetworkOperation*) ),
+		 url(), SIGNAL( start(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		 url(), SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( newChildren(const TQValueList<TQUrlInfo>&,TQNetworkOperation*) ),
+		 url(), SLOT( addEntry(const TQValueList<TQUrlInfo>&) ) );
+	connect( this, SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ),
+		 url(), SIGNAL( createdDirectory(const TQUrlInfo&,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( removed(TQNetworkOperation*) ),
+		 url(), SIGNAL( removed(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( itemChanged(TQNetworkOperation*) ),
+		 url(), SIGNAL( itemChanged(TQNetworkOperation*) ) );
+	connect( this, SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ),
+		 url(), SIGNAL( dataTransferProgress(int,int,TQNetworkOperation*) ) );
+	connect( this, SIGNAL( connectionStateChanged(int,const TQString&) ),
+		 url(), SIGNAL( connectionStateChanged(int,const TQString&) ) );
+    }
+
+    if ( !d->opInProgress && !d->operationQueue.isEmpty() )
+	d->opStartTimer->start( 0, TRUE );
+}
+
+/*!
+    For processing operations the network protocol base class calls
+    this method tquite often. This should be reimplemented by new
+    network protocols. It should return TRUE if the connection is OK
+    (open); otherwise it should return FALSE. If the connection is not
+    open the protocol should open it.
+
+    If the connection can't be opened (e.g. because you already tried
+    but the host couldn't be found), set the state of \a op to
+    TQNetworkProtocol::StFailed and emit the finished() signal with
+    this TQNetworkOperation as argument.
+
+    \a op is the operation that needs an open connection.
+*/
+
+bool TQNetworkProtocol::checkConnection( TQNetworkOperation * )
+{
+    return TRUE;
+}
+
+/*!
+    Returns an int that is OR'd together using the enum values of
+    \l{TQNetworkProtocol::Operation}, which describes which operations
+    are supported by the network protocol. Should be reimplemented by
+    new network protocols.
+*/
+
+int TQNetworkProtocol::supportedOperations() const
+{
+    return 0;
+}
+
+/*!
+    Adds the operation \a op to the operation queue. The operation
+    will be processed as soon as possible. This method returns
+    immediately.
+*/
+
+void TQNetworkProtocol::addOperation( TQNetworkOperation *op )
+{
+#ifdef TQNETWORKPROTOCOL_DEBUG
+    qDebug( "TQNetworkOperation: addOperation: %p %d", op, op->operation() );
+#endif
+    d->operationQueue.enqueue( op );
+    if ( !d->opInProgress )
+	d->opStartTimer->start( 0, TRUE );
+}
+
+/*!
+    Static method to register a network protocol for TQt. For example,
+    if you have an implementation of NNTP (called Nntp) which is
+    derived from TQNetworkProtocol, call:
+    \code
+    TQNetworkProtocol::registerNetworkProtocol( "nntp", new TQNetworkProtocolFactory<Nntp> );
+    \endcode
+    after which your implementation is registered for future nntp
+    operations.
+
+    The name of the protocol is given in \a protocol and a pointer to
+    the protocol factory is given in \a protocolFactory.
+*/
+
+void TQNetworkProtocol::registerNetworkProtocol( const TQString &protocol,
+						TQNetworkProtocolFactoryBase *protocolFactory )
+{
+    if ( !qNetworkProtocolRegister ) {
+	qNetworkProtocolRegister = new TQNetworkProtocolDict;
+	TQNetworkProtocol::registerNetworkProtocol( "file", new TQNetworkProtocolFactory< TQLocalFs > );
+    }
+
+    qNetworkProtocolRegister->insert( protocol, protocolFactory );
+}
+
+/*!
+    Static method to get a new instance of the network protocol \a
+    protocol. For example, if you need to do some FTP operations, do
+    the following:
+    \code
+    TQFtp *ftp = TQNetworkProtocol::getNetworkProtocol( "ftp" );
+    \endcode
+    This returns a pointer to a new instance of an ftp implementation
+    or null if no protocol for ftp was registered. The ownership of
+    the pointer is transferred to you, so you must delete it if you
+    don't need it anymore.
+
+    Normally you should not work directly with network protocols, so
+    you will not need to call this method yourself. Instead, use
+    TQUrlOperator, which makes working with network protocols much more
+    convenient.
+
+    \sa TQUrlOperator
+*/
+
+TQNetworkProtocol *TQNetworkProtocol::getNetworkProtocol( const TQString &protocol )
+{
+    if ( !qNetworkProtocolRegister ) {
+	qNetworkProtocolRegister = new TQNetworkProtocolDict;
+	TQNetworkProtocol::registerNetworkProtocol( "file", new TQNetworkProtocolFactory< TQLocalFs > );
+    }
+
+    if ( protocol.isNull() )
+	return 0;
+
+    TQNetworkProtocolFactoryBase *factory = qNetworkProtocolRegister->find( protocol );
+    if ( factory )
+	return factory->createObject();
+
+    return 0;
+}
+
+/*!
+    Returns TRUE if the only protocol registered is for working on the
+    local filesystem; returns FALSE if other network protocols are
+    also registered.
+*/
+
+bool TQNetworkProtocol::hasOnlyLocalFileSystem()
+{
+    if ( !qNetworkProtocolRegister )
+	return FALSE;
+
+    TQDictIterator< TQNetworkProtocolFactoryBase > it( *qNetworkProtocolRegister );
+    for ( ; it.current(); ++it )
+	if ( it.currentKey() != "file" )
+	    return FALSE;
+    return TRUE;
+}
+
+/*!
+  \internal
+  Starts processing network operations.
+*/
+
+void TQNetworkProtocol::startOps()
+{
+#ifdef TQNETWORKPROTOCOL_DEBUG
+    qDebug( "TQNetworkOperation: start processing operations" );
+#endif
+    processNextOperation( 0 );
+}
+
+/*!
+  \internal
+  Processes the operation \a op. It calls the
+  corresponding operation[something]( TQNetworkOperation * )
+  methods.
+*/
+
+void TQNetworkProtocol::processOperation( TQNetworkOperation *op )
+{
+    if ( !op )
+	return;
+
+    switch ( op->operation() ) {
+    case OpListChildren:
+	operationListChildren( op );
+	break;
+    case OpMkDir:
+	operationMkDir( op );
+	break;
+    case OpRemove:
+	operationRemove( op );
+	break;
+    case OpRename:
+	operationRename( op );
+	break;
+    case OpGet:
+	operationGet( op );
+	break;
+    case OpPut:
+	operationPut( op );
+	break;
+    }
+}
+
+/*!
+    When implementing a new network protocol, this method should be
+    reimplemented if the protocol supports listing children (files);
+    this method should then process this TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which describes in
+    detail how to reimplement this method. You may also want to look
+    at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationListChildren( TQNetworkOperation * )
+{
+}
+
+/*!
+    When implementing a new network protocol, this method should be
+    reimplemented if the protocol supports making directories; this
+    method should then process this TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which describes in
+    detail how to reimplement this method. You may also want to look
+    at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationMkDir( TQNetworkOperation * )
+{
+}
+
+/*!
+    When implementing a new network protocol, this method should be
+    reimplemented if the protocol supports removing children (files);
+    this method should then process this TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which is describes
+    in detail how to reimplement this method. You may also want to
+    look at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationRemove( TQNetworkOperation * )
+{
+}
+
+/*!
+    When implementing a new newtork protocol, this method should be
+    reimplemented if the protocol supports renaming children (files);
+    this method should then process this TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which describes in
+    detail how to reimplement this method. You may also want to look
+    at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationRename( TQNetworkOperation * )
+{
+}
+
+/*!
+    When implementing a new network protocol, this method should be
+    reimplemented if the protocol supports getting data; this method
+    should then process the TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which describes in
+    detail how to reimplement this method. You may also want to look
+    at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationGet( TQNetworkOperation * )
+{
+}
+
+/*!
+    When implementing a new network protocol, this method should be
+    reimplemented if the protocol supports putting (uploading) data;
+    this method should then process the TQNetworkOperation.
+
+    When you reimplement this method it's very important that you emit
+    the correct signals at the correct time (especially the finished()
+    signal after processing an operation). Take a look at the \link
+    network.html TQt Network Documentation\endlink which describes in
+    detail how to reimplement this method. You may also want to look
+    at the example implementation in
+    examples/network/networkprotocol/nntp.cpp.
+
+    \a op is the pointer to the operation object which contains all
+    the information on the operation that has finished, including the
+    state, etc.
+*/
+
+void TQNetworkProtocol::operationPut( TQNetworkOperation * )
+{
+}
+
+/*! \internal
+*/
+
+void TQNetworkProtocol::operationPutChunk( TQNetworkOperation * )
+{
+}
+
+/*!
+  \internal
+  Handles operations. Deletes the previous operation object and
+  tries to process the next operation. It also checks the connection state
+  and only processes the next operation, if the connection of the protocol
+  is open. Otherwise it waits until the protocol opens the connection.
+*/
+
+void TQNetworkProtocol::processNextOperation( TQNetworkOperation *old )
+{
+#ifdef TQNETWORKPROTOCOL_DEBUG
+    qDebug( "TQNetworkOperation: process next operation, old: %p", old );
+#endif
+    d->removeTimer->stop();
+
+    if ( old )
+	d->oldOps.append( old );
+    if ( d->opInProgress && d->opInProgress!=old )
+	d->oldOps.append( d->opInProgress );
+
+    if ( d->operationQueue.isEmpty() ) {
+	d->opInProgress = 0;
+	if ( d->autoDelete )
+	    d->removeTimer->start( d->removeInterval, TRUE );
+	return;
+    }
+
+    TQNetworkOperation *op = d->operationQueue.head();
+
+    d->opInProgress = op;
+
+    if ( !checkConnection( op ) ) {
+	if ( op->state() != TQNetworkProtocol::StFailed ) {
+	    d->opStartTimer->start( 0, TRUE );
+	} else {
+	    d->operationQueue.dequeue();
+	    clearOperationQueue();
+	    emit finished( op );
+	}
+
+	return;
+    }
+
+    d->opInProgress = op;
+    d->operationQueue.dequeue();
+    processOperation( op );
+}
+
+/*!
+    Returns the TQUrlOperator on which the protocol works.
+*/
+
+TQUrlOperator *TQNetworkProtocol::url() const
+{
+    return d->url;
+}
+
+/*!
+    Returns the operation, which is being processed, or 0 of no
+    operation is being processed at the moment.
+*/
+
+TQNetworkOperation *TQNetworkProtocol::operationInProgress() const
+{
+    return d->opInProgress;
+}
+
+/*!
+    Clears the operation queue.
+*/
+
+void TQNetworkProtocol::clearOperationQueue()
+{
+    d->operationQueue.dequeue();
+    d->operationQueue.setAutoDelete( TRUE );
+    d->operationQueue.clear();
+}
+
+/*!
+    Stops the current operation that is being processed and clears all
+    waiting operations.
+*/
+
+void TQNetworkProtocol::stop()
+{
+    TQNetworkOperation *op = d->opInProgress;
+    clearOperationQueue();
+    if ( op ) {
+	op->setState( StStopped );
+	op->setProtocolDetail( tr( "Operation stopped by the user" ) );
+	emit finished( op );
+	setUrl( 0 );
+	op->free();
+    }
+}
+
+/*!
+    Because it's sometimes hard to take care of removing network
+    protocol instances, TQNetworkProtocol provides an auto-delete
+    mechanism. If you set \a b to TRUE, the network protocol instance
+    is removed after it has been inactive for \a i milliseconds (i.e.
+    \a i milliseconds after the last operation has been processed).
+    If you set \a b to FALSE the auto-delete mechanism is switched
+    off.
+
+    If you switch on auto-delete, the TQNetworkProtocol also deletes
+    its TQUrlOperator.
+*/
+
+void TQNetworkProtocol::setAutoDelete( bool b, int i )
+{
+    d->autoDelete = b;
+    d->removeInterval = i;
+}
+
+/*!
+    Returns TRUE if auto-deleting is enabled; otherwise returns FALSE.
+
+    \sa TQNetworkProtocol::setAutoDelete()
+*/
+
+bool TQNetworkProtocol::autoDelete() const
+{
+    return d->autoDelete;
+}
+
+/*!
+  \internal
+*/
+
+void TQNetworkProtocol::removeMe()
+{
+    if ( d->autoDelete ) {
+#ifdef TQNETWORKPROTOCOL_DEBUG
+	qDebug( "TQNetworkOperation:  autodelete of TQNetworkProtocol %p", this );
+#endif
+	delete d->url; // destructor deletes the network protocol
+    }
+}
+
+void TQNetworkProtocol::emitNewChildren( const TQUrlInfo &i, TQNetworkOperation *op )
+{
+    TQValueList<TQUrlInfo> lst;
+    lst << i;
+    emit newChildren( lst, op );
+}
+
+class TQNetworkOperationPrivate
+{
+public:
+    TQNetworkProtocol::Operation operation;
+    TQNetworkProtocol::State state;
+    TQMap<int, TQString> args;
+    TQMap<int, TQByteArray> rawArgs;
+    TQString protocolDetail;
+    int errorCode;
+    TQTimer *deleteTimer;
+};
+
+/*!
+    \class TQNetworkOperation
+
+    \brief The TQNetworkOperation class provides common operations for network protocols.
+\if defined(commercial)
+    It is part of the <a href="commercialeditions.html">TQt Enterprise Edition</a>.
+\endif
+
+    \module network
+    \ingroup io
+
+    An object is created to describe the operation and the current
+    state for each operation that a network protocol should process.
+
+    For a detailed description of the TQt Network Architecture and how
+    to implement and use network protocols in TQt, see the \link
+    network.html TQt Network Documentation\endlink.
+
+    \sa TQNetworkProtocol
+*/
+
+/*!
+    Constructs a network operation object. \a operation is the type of
+    the operation, and \a arg0, \a arg1 and \a arg2 are the first
+    three arguments of the operation. The state is initialized to
+    TQNetworkProtocol::StWaiting.
+
+    \sa TQNetworkProtocol::Operation TQNetworkProtocol::State
+*/
+
+TQNetworkOperation::TQNetworkOperation( TQNetworkProtocol::Operation operation,
+				      const TQString &arg0, const TQString &arg1,
+				      const TQString &arg2 )
+{
+    d = new TQNetworkOperationPrivate;
+    d->deleteTimer = new TQTimer( this );
+    connect( d->deleteTimer, SIGNAL( timeout() ),
+	     this, SLOT( deleteMe() ) );
+    d->operation = operation;
+    d->state = TQNetworkProtocol::StWaiting;
+    d->args[ 0 ] = arg0;
+    d->args[ 1 ] = arg1;
+    d->args[ 2 ] = arg2;
+    d->rawArgs[ 0 ] = TQByteArray( 0 );
+    d->rawArgs[ 1 ] = TQByteArray( 0 );
+    d->rawArgs[ 2 ] = TQByteArray( 0 );
+    d->protocolDetail = TQString::null;
+    d->errorCode = (int)TQNetworkProtocol::NoError;
+}
+
+/*!
+    Constructs a network operation object. \a operation is the type of
+    the operation, and \a arg0, \a arg1 and \a arg2 are the first
+    three raw data arguments of the operation. The state is
+    initialized to TQNetworkProtocol::StWaiting.
+
+    \sa TQNetworkProtocol::Operation TQNetworkProtocol::State
+*/
+
+TQNetworkOperation::TQNetworkOperation( TQNetworkProtocol::Operation operation,
+				      const TQByteArray &arg0, const TQByteArray &arg1,
+				      const TQByteArray &arg2 )
+{
+    d = new TQNetworkOperationPrivate;
+    d->deleteTimer = new TQTimer( this );
+    connect( d->deleteTimer, SIGNAL( timeout() ),
+	     this, SLOT( deleteMe() ) );
+    d->operation = operation;
+    d->state = TQNetworkProtocol::StWaiting;
+    d->args[ 0 ] = TQString::null;
+    d->args[ 1 ] = TQString::null;
+    d->args[ 2 ] = TQString::null;
+    d->rawArgs[ 0 ] = arg0;
+    d->rawArgs[ 1 ] = arg1;
+    d->rawArgs[ 2 ] = arg2;
+    d->protocolDetail = TQString::null;
+    d->errorCode = (int)TQNetworkProtocol::NoError;
+}
+
+/*!
+    Destructor.
+*/
+
+TQNetworkOperation::~TQNetworkOperation()
+{
+    delete d;
+}
+
+/*!
+    Sets the \a state of the operation object. This should be done by
+    the network protocol during processing; at the end it should be
+    set to TQNetworkProtocol::StDone or TQNetworkProtocol::StFailed,
+    depending on success or failure.
+
+    \sa TQNetworkProtocol::State
+*/
+
+void TQNetworkOperation::setState( TQNetworkProtocol::State state )
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    d->state = state;
+}
+
+/*!
+    If the operation failed, the error message can be specified as \a
+    detail.
+*/
+
+void TQNetworkOperation::setProtocolDetail( const TQString &detail )
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    d->protocolDetail = detail;
+}
+
+/*!
+    Sets the error code to \a ec.
+
+    If the operation failed, the protocol should set an error code to
+    describe the error in more detail. If possible, one of the error
+    codes defined in TQNetworkProtocol should be used.
+
+    \sa setProtocolDetail() TQNetworkProtocol::Error
+*/
+
+void TQNetworkOperation::setErrorCode( int ec )
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    d->errorCode = ec;
+}
+
+/*!
+    Sets the network operation's \a{num}-th argument to \a arg.
+*/
+
+void TQNetworkOperation::setArg( int num, const TQString &arg )
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    d->args[ num ] = arg;
+}
+
+/*!
+    Sets the network operation's \a{num}-th raw data argument to \a arg.
+*/
+
+void TQNetworkOperation::setRawArg( int num, const TQByteArray &arg )
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    d->rawArgs[ num ] = arg;
+}
+
+/*!
+    Returns the type of the operation.
+*/
+
+TQNetworkProtocol::Operation TQNetworkOperation::operation() const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->operation;
+}
+
+/*!
+    Returns the state of the operation. You can determine whether an
+    operation is still waiting to be processed, is being processed,
+    has been processed successfully, or failed.
+*/
+
+TQNetworkProtocol::State TQNetworkOperation::state() const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->state;
+}
+
+/*!
+    Returns the operation's \a{num}-th argument. If this argument was
+    not already set, an empty string is returned.
+*/
+
+TQString TQNetworkOperation::arg( int num ) const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->args[ num ];
+}
+
+/*!
+    Returns the operation's \a{num}-th raw data argument. If this
+    argument was not already set, an empty bytearray is returned.
+*/
+
+TQByteArray TQNetworkOperation::rawArg( int num ) const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->rawArgs[ num ];
+}
+
+/*!
+    Returns a detailed error message for the last error. This must
+    have been set using setProtocolDetail().
+*/
+
+TQString TQNetworkOperation::protocolDetail() const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->protocolDetail;
+}
+
+/*!
+    Returns the error code for the last error that occurred.
+*/
+
+int TQNetworkOperation::errorCode() const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->errorCode;
+}
+
+/*!
+  \internal
+*/
+
+TQByteArray& TQNetworkOperation::raw( int num ) const
+{
+    if ( d->deleteTimer->isActive() ) {
+	d->deleteTimer->stop();
+	d->deleteTimer->start( NETWORK_OP_DELAY );
+    }
+    return d->rawArgs[ num ];
+}
+
+/*!
+    Sets this object to delete itself when it hasn't been used for one
+    second.
+
+    Because TQNetworkOperation pointers are passed around a lot the
+    TQNetworkProtocol generally does not have enough knowledge to
+    delete these at the correct time. If a TQNetworkProtocol doesn't
+    need an operation any more it will call this function instead.
+
+    Note: you should never need to call the method yourself.
+*/
+
+void TQNetworkOperation::free()
+{
+    d->deleteTimer->start( NETWORK_OP_DELAY );
+}
+
+/*!
+  \internal
+  Internal slot for auto-deletion.
+*/
+
+void TQNetworkOperation::deleteMe()
+{
+    delete this;
+}
+
+#endif