Test conversion to TQt3 from Qt3 8c6fc1f8e35fd264dd01c582ca5e7549b32ab731

1 files changed, 576 insertions, 0 deletions

diff --git a/src/network/qsocketdevice.cpp b/src/network/qsocketdevice.cpp
new file mode 100644
index 000000000..10895a538
--- /dev/null
+++ b/src/network/qsocketdevice.cpp
@@ -0,0 +1,576 @@
+/****************************************************************************
+**
+** Implementation of TQSocketDevice class.
+**
+** Created : 970521
+**
+** Copyright (C) 1992-2008 Trolltech ASA.  All rights reserved.
+**
+** This file is part of the network module of the TQt GUI Toolkit.
+**
+** This file may be used under the terms of the GNU General
+** Public License versions 2.0 or 3.0 as published by the Free
+** Software Foundation and appearing in the files LICENSE.GPL2
+** and LICENSE.GPL3 included in the packaging of this file.
+** Alternatively you may (at your option) use any later version
+** of the GNU General Public License if such license has been
+** publicly approved by Trolltech ASA (or its successors, if any)
+** and the KDE Free TQt Foundation.
+**
+** Please review the following information to ensure GNU General
+** Public Licensing retquirements will be met:
+** http://trolltech.com/products/qt/licenses/licensing/opensource/.
+** If you are unsure which license is appropriate for your use, please
+** review the following information:
+** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
+** or contact the sales department at [email protected].
+**
+** This file may be used under the terms of the Q Public License as
+** defined by Trolltech ASA and appearing in the file LICENSE.TQPL
+** included in the packaging of this file.  Licensees holding valid TQt
+** Commercial licenses may use this file in accordance with the TQt
+** Commercial License Agreement provided with the Software.
+**
+** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
+** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
+** herein.
+**
+**********************************************************************/
+
+#include "qsocketdevice.h"
+#ifndef QT_NO_NETWORK
+
+#include "qwindowdefs.h"
+#include <string.h>
+
+
+//#define TQSOCKETDEVICE_DEBUG
+
+
+class TQSocketDevicePrivate
+{
+public:
+    TQSocketDevicePrivate( TQSocketDevice::Protocol p )
+	: protocol(p)
+    { }
+
+    TQSocketDevice::Protocol protocol;
+};
+
+
+/*!
+    \class TQSocketDevice qsocketdevice.h
+    \brief The TQSocketDevice class provides a platform-independent low-level socket API.
+\if defined(commercial)
+    It is part of the <a href="commercialeditions.html">TQt Enterprise Edition</a>.
+\endif
+
+    \ingroup io
+    \module network
+
+    This class provides a low level API for working with sockets.  Users of
+    this class are assumed to have networking experience. For most users the
+    TQSocket class provides a much easier and high level alternative, but
+    certain things (like UDP) can't be done with TQSocket and if you need a
+    platform-independent API for those, TQSocketDevice is the right choice.
+
+    The essential purpose of the class is to provide a TQIODevice that
+    works on sockets, wrapped in a platform-independent API.
+
+    When calling connect() or bind(), TQSocketDevice detects the
+    protocol family (IPv4, IPv6) automatically. Passing the protocol
+    family to TQSocketDevice's constructor or to setSocket() forces
+    creation of a socket device of a specific protocol. If not set, the
+    protocol will be detected at the first call to connect() or bind().
+
+    \sa TQSocket, TQSocketNotifier, TQHostAddress
+*/
+
+
+/*!
+    \enum TQSocketDevice::Protocol
+
+    This enum type describes the protocol family of the socket. Possible values
+    are:
+
+    \value IPv4 The socket is an IPv4 socket.
+    \value IPv6 The socket is an IPv6 socket.
+    \value Unknown The protocol family of the socket is not known. This can
+	   happen if you use TQSocketDevice with an already existing socket; it
+	   tries to determine the protocol family, but this can fail if the
+	   protocol family is not known to TQSocketDevice.
+
+    \sa protocol() setSocket()
+*/
+
+/*!
+    \enum TQSocketDevice::Error
+
+    This enum type describes the error states of TQSocketDevice.
+
+    \value NoError  No error has occurred.
+
+    \value AlreadyBound  The device is already bound, according to bind().
+
+    \value Inaccessible  The operating system or firewall prohibited
+			the action.
+
+    \value NoResources  The operating system ran out of a resource.
+
+    \value InternalError  An internal error occurred in TQSocketDevice.
+
+    \value Impossible  An attempt was made to do something which makes
+    no sense. For example:
+    \code
+    ::close( sd->socket() );
+    sd->writeBlock( someData, 42 );
+    \endcode
+    The libc ::close() closes the socket, but TQSocketDevice is not aware
+    of this. So when you call writeBlock(), the impossible happens.
+
+    \value NoFiles  The operating system will not let TQSocketDevice open
+    another file.
+
+    \value ConnectionRefused  A connection attempt was rejected by the
+    peer.
+
+    \value NetworkFailure  There is a network failure.
+
+    \value UnknownError  The operating system did something
+    unexpected.
+*/
+
+/*!
+    \enum TQSocketDevice::Type
+
+    This enum type describes the type of the socket:
+    \value Stream  a stream socket (TCP, usually)
+    \value Datagram  a datagram socket (UDP, usually)
+*/
+
+
+/*!
+    Creates a TQSocketDevice object for the existing socket \a socket.
+
+    The \a type argument must match the actual socket type; use \c
+    TQSocketDevice::Stream for a reliable, connection-oriented TCP
+    socket, or \c TQSocketDevice::Datagram for an unreliable,
+    connectionless UDP socket.
+*/
+TQSocketDevice::TQSocketDevice( int socket, Type type )
+    : fd( socket ), t( type ), p( 0 ), pp( 0 ), e( NoError ),
+      d(new TQSocketDevicePrivate(Unknown))
+{
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice: Created TQSocketDevice %p (socket %x, type %d)",
+	   this, socket, type );
+#endif
+    init();
+    setSocket( socket, type );
+}
+
+/*!
+    Creates a TQSocketDevice object for a stream or datagram socket.
+
+    The \a type argument must be either \c TQSocketDevice::Stream for a
+    reliable, connection-oriented TCP socket, or \c
+    TQSocketDevice::Datagram for an unreliable UDP socket.
+
+    The socket is created as an IPv4 socket.
+
+    \sa blocking() protocol()
+*/
+TQSocketDevice::TQSocketDevice( Type type )
+    : fd( -1 ), t( type ), p( 0 ), pp( 0 ), e( NoError ),
+      d(new TQSocketDevicePrivate(IPv4))
+{
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice: Created TQSocketDevice object %p, type %d",
+	    this, type );
+#endif
+    init();
+    setSocket( createNewSocket(), type );
+}
+
+/*!
+    Creates a TQSocketDevice object for a stream or datagram socket.
+
+    The \a type argument must be either \c TQSocketDevice::Stream for a
+    reliable, connection-oriented TCP socket, or \c
+    TQSocketDevice::Datagram for an unreliable UDP socket.
+
+    The \a protocol indicates whether the socket should be of type IPv4
+    or IPv6. Passing \c Unknown is not meaningful in this context and you
+    should avoid using (it creates an IPv4 socket, but your code is not easily
+    readable).
+
+    The argument \a dummy is necessary for compatibility with some
+    compilers.
+
+    \sa blocking() protocol()
+*/
+TQSocketDevice::TQSocketDevice( Type type, Protocol protocol, int )
+    : fd( -1 ), t( type ), p( 0 ), pp( 0 ), e( NoError ),
+      d(new TQSocketDevicePrivate(protocol))
+{
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice: Created TQSocketDevice object %p, type %d",
+	    this, type );
+#endif
+    init();
+    setSocket( createNewSocket(), type );
+}
+
+/*!
+    Destroys the socket device and closes the socket if it is open.
+*/
+TQSocketDevice::~TQSocketDevice()
+{
+    close();
+    delete d;
+    d = 0;
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice: Destroyed TQSocketDevice %p", this );
+#endif
+}
+
+
+/*!
+    Returns TRUE if this is a valid socket; otherwise returns FALSE.
+
+    \sa socket()
+*/
+bool TQSocketDevice::isValid() const
+{
+    return fd != -1;
+}
+
+
+/*!
+    \fn Type TQSocketDevice::type() const
+
+    Returns the socket type which is either \c TQSocketDevice::Stream
+    or \c TQSocketDevice::Datagram.
+
+    \sa socket()
+*/
+TQSocketDevice::Type TQSocketDevice::type() const
+{
+    return t;
+}
+
+/*!
+    Returns the socket's protocol family, which is one of \c Unknown, \c IPv4,
+    or \c IPv6.
+
+    TQSocketDevice either creates a socket with a well known protocol family or
+    it uses an already existing socket. In the first case, this function
+    returns the protocol family it was constructed with. In the second case, it
+    tries to determine the protocol family of the socket; if this fails, it
+    returns \c Unknown.
+
+    \sa Protocol setSocket()
+*/
+TQSocketDevice::Protocol TQSocketDevice::protocol() const
+{
+    if ( d->protocol == Unknown )
+	d->protocol = getProtocol();
+    return d->protocol;
+}
+
+/*!
+    Returns the socket number, or -1 if it is an invalid socket.
+
+    \sa isValid(), type()
+*/
+int TQSocketDevice::socket() const
+{
+    return fd;
+}
+
+
+/*!
+    Sets the socket device to operate on the existing socket \a
+    socket.
+
+    The \a type argument must match the actual socket type; use \c
+    TQSocketDevice::Stream for a reliable, connection-oriented TCP
+    socket, or \c TQSocketDevice::Datagram for an unreliable,
+    connectionless UDP socket.
+
+    Any existing socket is closed.
+
+    \sa isValid(), close()
+*/
+void TQSocketDevice::setSocket( int socket, Type type )
+{
+    if ( fd != -1 )			// close any open socket
+	close();
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice::setSocket: socket %x, type %d", socket, type );
+#endif
+    t = type;
+    fd = socket;
+    d->protocol = Unknown;
+    e = NoError;
+    setFlags( IO_Sequential );
+    resetStatus();
+    open( IO_ReadWrite );
+    fetchConnectionParameters();
+}
+
+
+/*!
+    \reimp
+
+    Opens the socket using the specified TQIODevice file \a mode. This
+    function is called from the TQSocketDevice constructors and from
+    the setSocket() function. You should not call it yourself.
+
+    \sa close().
+*/
+bool TQSocketDevice::open( int mode )
+{
+    if ( isOpen() || !isValid() )
+	return FALSE;
+#if defined(TQSOCKETDEVICE_DEBUG)
+    qDebug( "TQSocketDevice::open: mode %x", mode );
+#endif
+    setMode( mode & IO_ReadWrite );
+    setState( IO_Open );
+    return TRUE;
+}
+
+
+/*!
+    \reimp
+
+    The current TQSocketDevice implementation does not buffer at all,
+    so this is a no-op.
+*/
+void TQSocketDevice::flush()
+{
+}
+
+
+/*!
+    \reimp
+
+    The size is meaningless for a socket, therefore this function returns 0.
+*/
+TQIODevice::Offset TQSocketDevice::size() const
+{
+    return 0;
+}
+
+
+/*!
+    \reimp
+
+    The read/write index is meaningless for a socket, therefore this
+    function returns 0.
+*/
+TQIODevice::Offset TQSocketDevice::at() const
+{
+    return 0;
+}
+
+
+/*!
+    \reimp
+
+    The read/write index is meaningless for a socket, therefore this
+    function does nothing and returns TRUE.
+*/
+bool TQSocketDevice::at( Offset )
+{
+    return TRUE;
+}
+
+
+/*!
+    \reimp
+
+    Returns TRUE if no data is currently available at the socket;
+    otherwise returns FALSE.
+*/
+bool TQSocketDevice::atEnd() const
+{
+    return bytesAvailable() <= 0;
+}
+
+
+/*!
+    \reimp
+
+    \warning getch() is implemented as a one-byte readBlock(), so it
+    may be very slow if you call it more than a few times.
+
+    \sa putch() readBlock()
+*/
+int TQSocketDevice::getch()
+{
+    char buf[2];
+    return  readBlock(buf,1) == 1 ? buf[0] : -1;
+}
+
+
+/*!
+    \reimp
+
+    \warning putch() is implemented as a one-byte writeBlock(), so it
+    may be very slow if you call it more than a few times.
+
+    \sa getch()
+*/
+int TQSocketDevice::putch( int ch )
+{
+    char buf[2];
+    buf[0] = ch;
+    return writeBlock(buf, 1) == 1 ? ch : -1;
+}
+
+
+/*!
+    \reimp
+
+    This implementation of ungetch returns -1 (error). A socket is a
+    sequential device and does not allow any ungetch operation.
+*/
+int TQSocketDevice::ungetch( int )
+{
+    return -1;
+}
+
+
+/*!
+    Returns TRUE if the address of this socket can be used by other
+    sockets at the same time, and FALSE if this socket claims
+    exclusive ownership.
+
+    \sa setAddressReusable()
+*/
+bool TQSocketDevice::addressReusable() const
+{
+    return option( ReuseAddress );
+}
+
+
+/*!
+    Sets the address of this socket to be usable by other sockets too
+    if \a enable is TRUE, and to be used exclusively by this socket if
+    \a enable is FALSE.
+
+    When a socket is reusable, other sockets can use the same port
+    number (and IP address), which is generally useful. Of course
+    other sockets cannot use the same
+    (address,port,peer-address,peer-port) 4-tuple as this socket, so
+    there is no risk of confusing the two TCP connections.
+
+    \sa addressReusable()
+*/
+void TQSocketDevice::setAddressReusable( bool enable )
+{
+    setOption( ReuseAddress, enable );
+}
+
+
+/*!
+    Returns the size of the operating system receive buffer.
+
+    \sa setReceiveBufferSize()
+*/
+int TQSocketDevice::receiveBufferSize() const
+{
+    return option( ReceiveBuffer );
+}
+
+
+/*!
+    Sets the size of the operating system receive buffer to \a size.
+
+    The operating system receive buffer size effectively limits two
+    things: how much data can be in transit at any one moment, and how
+    much data can be received in one iteration of the main event loop.
+
+    The default is operating system-dependent. A socket that receives
+    large amounts of data is probably best with a buffer size of
+    49152.
+*/
+void TQSocketDevice::setReceiveBufferSize( uint size )
+{
+    setOption( ReceiveBuffer, size );
+}
+
+
+/*!
+    Returns the size of the operating system send buffer.
+
+    \sa setSendBufferSize()
+*/
+int TQSocketDevice::sendBufferSize() const
+{
+    return option( SendBuffer );
+}
+
+
+/*!
+    Sets the size of the operating system send buffer to \a size.
+
+    The operating system send buffer size effectively limits how much
+    data can be in transit at any one moment.
+
+    The default is operating system-dependent. A socket that sends
+    large amounts of data is probably best with a buffer size of
+    49152.
+*/
+void TQSocketDevice::setSendBufferSize( uint size )
+{
+    setOption( SendBuffer, size );
+}
+
+
+/*!
+    Returns the port number of this socket device. This may be 0 for a
+    while, but is set to something sensible as soon as a sensible
+    value is available.
+
+    Note that TQt always uses native byte order, i.e. 67 is 67 in TQt;
+    there is no need to call htons().
+*/
+Q_UINT16 TQSocketDevice::port() const
+{
+    return p;
+}
+
+
+/*!
+    Returns the address of this socket device. This may be 0.0.0.0 for
+    a while, but is set to something sensible as soon as a sensible
+    value is available.
+*/
+TQHostAddress TQSocketDevice::address() const
+{
+    return a;
+}
+
+
+/*!
+    Returns the first error seen.
+*/
+TQSocketDevice::Error TQSocketDevice::error() const
+{
+    return e;
+}
+
+
+/*!
+    Allows subclasses to set the error state to \a err.
+*/
+void TQSocketDevice::setError( Error err )
+{
+    e = err;
+}
+#endif //QT_NO_NETWORK
+